-
2
-
-
46949091541
-
Informatics for combinatorial materials science
-
S. Broderick, C. Suh, J. Nowers, B. Vogel, S. Mallapragada, and B. Narasimhan Informatics for combinatorial materials science JOM Journal of the Minerals, Metals and Materials Society 60 2008 56 59
-
(2008)
JOM Journal of the Minerals, Metals and Materials Society
, vol.60
, pp. 56-59
-
-
Broderick, S.1
Suh, C.2
Nowers, J.3
Vogel, B.4
Mallapragada, S.5
Narasimhan, B.6
-
3
-
-
84867633894
-
From cyberinfrastructure to cyberdiscovery in materials science: Enhancing outcomes in materials research
-
August 3-5., accessed October 19, 2011 accessed October 19, 2011 http://www.nsf.gov/crssprgm/cdi/
-
Billinge SJE, Rajan K, Sinnot SB. From cyberinfrastructure to cyberdiscovery in materials science: enhancing outcomes in materials research, Report of NSF-Sponsored workshop held in Arlington, VA, August 3-5. http://www.mcc.uiuc.edu/nsf/ciw2006/, accessed October 19, 2011. See also http://www.nsf.gov/crssprgm/cdi/, accessed October 19, 2011, 2006.
-
(2006)
Report of NSF-Sponsored Workshop Held in Arlington, VA
-
-
Sje, B.1
Rajan, K.2
Sinnot, S.B.3
-
4
-
-
70350211848
-
First principles calculations and Calphad modeling of thermodynamics
-
Z.K. Liu First principles calculations and Calphad modeling of thermodynamics Journal of Phase Equilibria and Diffusion 30 2009 517 534
-
(2009)
Journal of Phase Equilibria and Diffusion
, vol.30
, pp. 517-534
-
-
Liu, Z.K.1
-
5
-
-
78651270377
-
Data mined ionic substitutions for the discovery of new compounds
-
G. Hautier, C. Fischer, V. Ehrlacher, A. Jain, and G. Ceder Data mined ionic substitutions for the discovery of new compounds Inorganic Chemistry 50 2011 656 663
-
(2011)
Inorganic Chemistry
, vol.50
, pp. 656-663
-
-
Hautier, G.1
Fischer, C.2
Ehrlacher, V.3
Jain, A.4
Ceder, G.5
-
6
-
-
33746326759
-
Searching for alloy configurations with target physical properties: Impurity design via a genetic algorithm inverse band structure approach
-
(4 pages)
-
S.V. Dudiy, and A. Zunger Searching for alloy configurations with target physical properties: impurity design via a genetic algorithm inverse band structure approach Physical Review Letters 97 2006 046401 (4 pages)
-
(2006)
Physical Review Letters
, vol.97
, pp. 046401
-
-
Dudiy, S.V.1
Zunger, A.2
-
7
-
-
48249154564
-
-
National Materials Advisory Board, NAE, National Academies Press Report Number: ISBN-10: 0-309-11999-5
-
T.M. Pollock, J.E. Allison, D.G. Backman, M.C. Boyce, M. Gersh, and E.A. Holm Integrated computational materials engineering: A transformational discipline for improved competitiveness and national security 2008 National Materials Advisory Board, NAE, National Academies Press Report Number: ISBN-10: 0-309-11999-5
-
(2008)
Integrated Computational Materials Engineering: A Transformational Discipline for Improved Competitiveness and National Security
-
-
Pollock, T.M.1
Allison, J.E.2
Backman, D.G.3
Boyce, M.C.4
Gersh, M.5
Holm, E.A.6
-
8
-
-
33745288297
-
-
National Materials Advisory Board, NAE, National Academies Press Report Number: ISBN-10: 0-309-09317-1
-
D. Apelian, A. Alleyne, C.A. Handwerker, D. Hopkins, J.A. Isaacs, and G.B. Olson Accelerating technology transition: Bridging the valley of death for materials and processes in defense systems 2004 National Materials Advisory Board, NAE, National Academies Press Report Number: ISBN-10: 0-309-09317-1
-
(2004)
Accelerating Technology Transition: Bridging the Valley of Death for Materials and Processes in Defense Systems
-
-
Apelian, D.1
Alleyne, A.2
Handwerker, C.A.3
Hopkins, D.4
Isaacs, J.A.5
Olson, G.B.6
-
9
-
-
33751345914
-
Integrated computational materials engineering: A new paradigm for the global materials profession
-
DOI 10.1007/s11837-006-0223-5
-
J. Allison, D. Backman, and L. Christodoulou Integrated computational materials engineering: a new paradigm for the global materials profession JOM Journal of the Minerals, Metals and Materials Society 58 2006 25 27 (Pubitemid 44803469)
-
(2006)
JOM
, vol.58
, Issue.11
, pp. 25-27
-
-
Allison, J.1
Backman, D.2
Christodoulou, L.3
-
10
-
-
0030768918
-
Computational design of hierarchically structured materials
-
DOI 10.1126/science.277.5330.1237
-
G.B. Olson Computational design of hierarchically structured materials Science 277 1997 1237 1242 (Pubitemid 27449064)
-
(1997)
Science
, vol.277
, Issue.5330
, pp. 1237-1242
-
-
Olson, G.B.1
-
11
-
-
84882342361
-
New directions in materials design science and engineering (MDS&E)
-
October 19-21 accessed May 5, 2012
-
McDowell DL, Story TL. New directions in materials design science and engineering (MDS&E), Report of a NSF DMR-sponsored workshop, October 19-21, 1998. http://www.me.gatech.edu/paden/material-design/mdse.pdf, accessed May 5, 2012.
-
(1998)
Report of A NSF DMR-sponsored Workshop
-
-
McDowell, D.L.1
Story, T.L.2
-
12
-
-
47049129723
-
Simulation-assisted materials design for the concurrent design of materials and products
-
D.L. McDowell Simulation-assisted materials design for the concurrent design of materials and products JOM Journal of the Minerals, Metals and Materials Society 59 2007 21 25
-
(2007)
JOM Journal of the Minerals, Metals and Materials Society
, vol.59
, pp. 21-25
-
-
McDowell, D.L.1
-
15
-
-
85014268468
-
-
Elsevier 9781856176620
-
D.L. McDowell, J.H. Panchal, H.-J. Choi, C.C. Seepersad, J.K. Allen, and F. Mistree Integrated design of multiscale, multifunctional materials and products 2009 Elsevier 9781856176620
-
(2009)
Integrated Design of Multiscale, Multifunctional Materials and Products
-
-
McDowell, D.L.1
Panchal, J.H.2
Choi, H.-J.3
Seepersad, C.C.4
Allen, J.K.5
Mistree, F.6
-
16
-
-
84863933789
-
-
National Science and Technology Council, Committee on Technology, June accessed May 5, 2012
-
Materials genome initiative for global competitiveness, National Science and Technology Council, Committee on Technology, June 2011. http://www. whitehouse.gov/sites/default/files/microsites/ostp/materialsgenomeinitiative- final.pdf, accessed May 5, 2012.
-
(2011)
Materials Genome Initiative for Global Competitiveness
-
-
-
18
-
-
0004025336
-
-
Cambridge monographs on applied and computational mathematics
-
G.W. Milton The theory of composites Cambridge monographs on applied and computational mathematics 2001
-
(2001)
The Theory of Composites
-
-
Milton, G.W.1
-
21
-
-
80051794631
-
Understanding and visualizing microstructure and microstructure variance as a stochastic process
-
S.R. Niezgoda, Y.C. Yabansu, and S.R. Kalidindi Understanding and visualizing microstructure and microstructure variance as a stochastic process Acta Materialia 59 2011 6387 6400
-
(2011)
Acta Materialia
, vol.59
, pp. 6387-6400
-
-
Niezgoda, S.R.1
Yabansu, Y.C.2
Kalidindi, S.R.3
-
23
-
-
0035691593
-
Materials design: A useful research focus for inelastic behavior of structural metals
-
DOI 10.1016/S0167-8442(01)00077-5, PII S0167844201000775
-
D.L. McDowell Materials design: a useful research focus for inelastic behavior of structural metals Theoretical and Applied Fracture Mechanics 37 2001 245 259 Special issue on the prospects of mesomechanics in the 21st century: current thinking on multiscale mechanics problems (Pubitemid 34082337)
-
(2001)
Theoretical and Applied Fracture Mechanics
, vol.37
, Issue.1-3
, pp. 245-259
-
-
McDowell, D.L.1
-
24
-
-
47949115468
-
Viscoplasticity of heterogeneous metallic materials
-
D.L. McDowell Viscoplasticity of heterogeneous metallic materials Materials Science and Engineering R 62 2008 67 123
-
(2008)
Materials Science and Engineering R
, vol.62
, pp. 67-123
-
-
McDowell, D.L.1
-
25
-
-
77956094713
-
A perspective on trends in multiscale plasticity
-
D.L. McDowell A perspective on trends in multiscale plasticity International Journal of Plasticity 26 2010 1280 1309
-
(2010)
International Journal of Plasticity
, vol.26
, pp. 1280-1309
-
-
McDowell, D.L.1
-
26
-
-
84867633881
-
-
E. Becker, B. Budiansky, W.T. Koiter, H.A. Lauwerier, 2nd ed. North Holland series in applied mathematics and mechanics North Holland Amsterdam-New York
-
H. Ziegler E. Becker, B. Budiansky, W.T. Koiter, H.A. Lauwerier, An introduction to thermomechanics 2nd ed. North Holland series in applied mathematics and mechanics vol. 21 1983 North Holland Amsterdam-New York
-
(1983)
An Introduction to Thermomechanics
, vol.21
-
-
Ziegler, H.1
-
28
-
-
47949112311
-
Internal state variable theory
-
S. Yip, M.F. Horstemeyer, Springer the Netherlands
-
D.L. McDowell Internal state variable theory S. Yip, M.F. Horstemeyer, Handbook of materials modeling, Part A: methods 2005 Springer the Netherlands 1151 1170
-
(2005)
Handbook of Materials Modeling, Part A: Methods
, pp. 1151-1170
-
-
McDowell, D.L.1
-
29
-
-
0029408454
-
An atomistic study of brittle fracture: Toward explicit failure criteria from atomistic modeling
-
P. Gumbsch An atomistic study of brittle fracture: toward explicit failure criteria from atomistic modeling Journal of Materials Research 10 1995 2897 2907
-
(1995)
Journal of Materials Research
, vol.10
, pp. 2897-2907
-
-
Gumbsch, P.1
-
30
-
-
42749099174
-
Matching conditions in atomistic-continuum modeling of materials
-
E. Weinan, and Z. Huang Matching conditions in atomistic-continuum modeling of materials Physical Review Letters 87 2001 135501
-
(2001)
Physical Review Letters
, vol.87
, pp. 135501
-
-
Weinan, E.1
Huang, Z.2
-
31
-
-
0036778702
-
A coupled atomistic/continuum model of defects in solids
-
DOI 10.1016/S0022-5096(02)00017-0, PII S0022509602000170
-
L.E. Shilkrot, W.A. Curtin, and R.E. Miller A coupled atomistic/continuum model of defects in solids Journal of the Mechanics and Physics of Solids 50 2002 2085 2106 (Pubitemid 34803079)
-
(2002)
Journal of the Mechanics and Physics of Solids
, vol.50
, Issue.10
, pp. 2085-2106
-
-
Shilkrot, L.E.1
Curtin, W.A.2
Miller, R.E.3
-
34
-
-
25844433763
-
A finite-temperature dynamic coupled atomistic/discrete dislocation method
-
DOI 10.1088/0965-0393/13/7/007, PII S096503930592007X
-
S. Qu, V. Shastry, W.A. Curtin, and R.E. Miller A finite-temperature dynamic coupled atomistic/discrete dislocation method Modelling and Simulation in Materials Science and Engineering 13 2005 1101 1118 (Pubitemid 41395432)
-
(2005)
Modelling and Simulation in Materials Science and Engineering
, vol.13
, Issue.7
, pp. 1101-1118
-
-
Qu, S.1
Shastry, V.2
Curtin, W.A.3
Miller, R.E.4
-
35
-
-
77957718154
-
Coupling quantum and continuum scales to predict crack tip dislocation nucleation
-
A.K. Nair, D.H. Warner, R.G. Hennig, and W.A. Curtin Coupling quantum and continuum scales to predict crack tip dislocation nucleation Scripta Materialia 63 2010 1212 1215
-
(2010)
Scripta Materialia
, vol.63
, pp. 1212-1215
-
-
Nair, A.K.1
Warner, D.H.2
Hennig, R.G.3
Curtin, W.A.4
-
36
-
-
0030158774
-
Quasicontinuum analysis of defects in solids
-
E.B. Tadmor, M. Ortiz, and R. Phillips Quasicontinuum analysis of defects in solids Philosophical Magazine A 73 1996 1529 1563 (Pubitemid 126310376)
-
(1996)
Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties
, vol.73
, Issue.6
, pp. 1529-1563
-
-
Tadmor, E.B.1
Ortiz, M.2
Phillips, R.3
-
37
-
-
0001430250
-
Mixed atomistic and continuum models of deformation in solids
-
E.B. Tadmor, R. Phillips, and M. Ortiz Mixed atomistic and continuum models of deformation in solids Langmuir 12 1996 4529 4534
-
(1996)
Langmuir
, vol.12
, pp. 4529-4534
-
-
Tadmor, E.B.1
Phillips, R.2
Ortiz, M.3
-
38
-
-
0001024099
-
Quasicontinuum models of interfacial structure and deformation
-
V.B. Shenoy, R. Miller, E.B. Tadmor, R. Phillips, and M. Ortiz Quasicontinuum models of interfacial structure and deformation Physical Review Letters 80 1998 742 745 (Pubitemid 128623851)
-
(1998)
Physical Review Letters
, vol.80
, Issue.4
, pp. 742-745
-
-
Shenoy, V.B.1
Miller, R.2
Tadmor, E.B.3
Phillips, R.4
Ortiz, M.5
-
39
-
-
0032154002
-
Quasicontinuum simulation of fracture at the atomic scale
-
PII S0965039398952202
-
R. Miller, E.B. Tadmor, R. Phillips, and M. Ortiz Quasicontinuum simulation of fracture at the atomic scale Modelling and Simulation in Materials Science and Engineering 6 1998 607 638 (Pubitemid 128677792)
-
(1998)
Modelling and Simulation in Materials Science and Engineering
, vol.6
, Issue.5
, pp. 607-638
-
-
Miller, R.1
Tadmor, E.B.2
Phillips, R.3
Ortiz, M.4
-
40
-
-
0033100627
-
An adaptive finite element approach to atomic-scale mechanics - The quasicontinuum method
-
V.B. Shenoy, R. Miller, E.B. Tadmor, D. Rodney, R. Phillips, and M. Ortiz An adaptive finite element approach to atomic-scale mechanics - the quasicontinuum method Journal of the Mechanics and Physics of Solids 47 1999 611 642
-
(1999)
Journal of the Mechanics and Physics of Solids
, vol.47
, pp. 611-642
-
-
Shenoy, V.B.1
Miller, R.2
Tadmor, E.B.3
Rodney, D.4
Phillips, R.5
Ortiz, M.6
-
41
-
-
0037166891
-
Dynamics of an inhomogeneously coarse grained multiscale system
-
S. Curtarolo, and G. Ceder Dynamics of an inhomogeneously coarse grained multiscale system Physical Review Letters 88 2002 255504
-
(2002)
Physical Review Letters
, vol.88
, pp. 255504
-
-
Curtarolo, S.1
Ceder, G.2
-
43
-
-
0037717099
-
On a formulation for a multiscale atomistic-continuum homogenization method
-
DOI 10.1016/S0020-7683(03)00058-1
-
P.W. Chung, and R.R. Namburu On a formulation for a multiscale atomistic-continuum homogenization method International Journal of Solids and Structures 40 2003 2563 2588 (Pubitemid 36562543)
-
(2003)
International Journal of Solids and Structures
, vol.40
, Issue.10
, pp. 2563-2588
-
-
Chung, P.W.1
Namburu, R.R.2
-
44
-
-
34547590327
-
Thermomechanical continuum representation of atomistic deformation at arbitrary size scales
-
M. Zhou Thermomechanical continuum representation of atomistic deformation at arbitrary size scales Proceedings of the Royal Society A 461 2005 3437 3472
-
(2005)
Proceedings of the Royal Society A
, vol.461
, pp. 3437-3472
-
-
Zhou, M.1
-
46
-
-
36649037162
-
Coupled quantum-atomistic and quantum-continuum mechanics methods in materials research
-
A. Ramasubramaniam, and E.A. Carter Coupled quantum-atomistic and quantum-continuum mechanics methods in materials research MRS Bulletin 32 2007 913 918 (Pubitemid 350197557)
-
(2007)
MRS Bulletin
, vol.32
, Issue.11
, pp. 913-918
-
-
Ramasubramaniam, A.1
Carter, E.A.2
-
47
-
-
0001259264
-
Coarse-grained molecular dynamics and the atomic limit of finite elements
-
R.E. Rudd, and J.Q. Broughton Coarse-grained molecular dynamics and the atomic limit of finite elements Physical Review B 58 1998 R5893 R5896
-
(1998)
Physical Review B
, vol.58
-
-
Rudd, R.E.1
Broughton, J.Q.2
-
49
-
-
29744435714
-
Coarse-grained molecular dynamics: Nonlinear finite elements and finite temperature
-
R.E. Rudd, and J.Q. Broughton Coarse-grained molecular dynamics: nonlinear finite elements and finite temperature Physical Review B 72 2005 144104
-
(2005)
Physical Review B
, vol.72
, pp. 144104
-
-
Rudd, R.E.1
Broughton, J.Q.2
-
50
-
-
40849098947
-
A variational approach to coarse graining of equilibrium and non-equilibrium atomistic description at finite temperature
-
DOI 10.1016/j.jmps.2007.09.005, PII S0022509607001834
-
Y. Kulkarni, J. Knap, and M. Ortiz A variational approach to coarse-graining of equilibrium and non-equilibrium atomistic description at finite temperature Journal of the Mechanics and Physics of Solids 56 2008 1417 1449 (Pubitemid 351400783)
-
(2008)
Journal of the Mechanics and Physics of Solids
, vol.56
, Issue.4
, pp. 1417-1449
-
-
Kulkarni, Y.1
Knap, J.2
Ortiz, M.3
-
51
-
-
64649097946
-
Reformulation of microscopic balance equations for multiscale materials modeling
-
Y. Chen Reformulation of microscopic balance equations for multiscale materials modeling Journal of Chemical Physics 130 2009 134706
-
(2009)
Journal of Chemical Physics
, vol.130
, pp. 134706
-
-
Chen, Y.1
-
52
-
-
0035854076
-
Nanoscale phase field microelasticity theory of dislocations: Model and 3D simulations
-
DOI 10.1016/S1359-6454(01)00075-1, PII S1359645401000751
-
Y.U. Wang, Y.M. Jin, A.M. Cuitino, and A.G. Khachaturyan Nanoscale phase field microelasticity theory of dislocations: model and 3-D simulations Acta Materialia 49 2001 1847 1857 (Pubitemid 32427386)
-
(2001)
Acta Materialia
, vol.49
, Issue.10
, pp. 1847-1857
-
-
Wang, Y.U.1
Jin, Y.M.2
Cuitino, A.M.3
Khachaturyan, A.G.4
-
53
-
-
0036036465
-
Phase-field models for microstructure evolution
-
DOI 10.1146/annurev.matsci.32.112001.132041
-
L.-Q. Chen Phase-field models for microstructure evolution Annual Review of Materials Research 32 2002 113 140 (Pubitemid 34992567)
-
(2002)
Annual Review of Materials Science
, vol.32
, pp. 113-140
-
-
Chen, L.-Q.1
-
54
-
-
1842795547
-
Modeling dislocation network and dislocation-precipitate interaction at mesoscopic scale using phase field method
-
C. Shen, and Y. Wang Modeling dislocation network and dislocation-precipitate interaction at mesoscopic scale using phase field method International Journal of Multiscale Computational Engineering 1 2003 91 104
-
(2003)
International Journal of Multiscale Computational Engineering
, vol.1
, pp. 91-104
-
-
Shen, C.1
Wang, Y.2
-
55
-
-
77956094704
-
Coupling of atomistic and meso-scale phase-field modeling of rapid solidification
-
March 16-20, Pittsburgh, PA
-
Belak J, Turchi PEA, Dorr MR, Richards DF, Fattebert J-L, Wickett ME. et al. Coupling of atomistic and meso-scale phase-field modeling of rapid solidification, in 2009 APS March Meeting, March 16-20, Pittsburgh, PA, 2009.
-
(2009)
2009 APS March Meeting
-
-
Belak, J.1
Pea, T.2
Dorr, M.R.3
Richards, D.F.4
Fattebert, J.-L.5
Et Al., W.Me.6
-
56
-
-
0035061914
-
A multi-level computational model for multi-scale damage analysis in composite and porous materials
-
DOI 10.1016/S0020-7683(00)00167-0, PII S0020768300001670
-
S. Ghosh, K. Lee, and P. Raghavan A multi-level computational model for multi-scale damage analysis in composite and porous materials International Journal of Solids and Structures 38 2001 2335 2385 (Pubitemid 32333795)
-
(2001)
International Journal of Solids and Structures
, vol.38
, Issue.14
, pp. 2335-2385
-
-
Ghosh, S.1
Lee, K.2
Raghavan, P.3
-
57
-
-
1842708892
-
An introduction to computational nanomechanics and materials
-
DOI 10.1016/j.cma.2003.12.008, PII S004578250400009X
-
W.K. Liu, E.G. Karpov, S. Zhang, and H.S. Park An introduction to computational nanomechanics and materials Computer Methods in Applied Mechanics and Engineering 193 2004 1529 1578 (Pubitemid 38472896)
-
(2004)
Computer Methods in Applied Mechanics and Engineering
, vol.193
, Issue.17-20
, pp. 1529-1578
-
-
Liu, W.K.1
Karpov, E.G.2
Zhang, S.3
Park, H.S.4
-
58
-
-
30944467079
-
Bridging scale methods for nanomechanics and materials
-
DOI 10.1016/j.cma.2005.05.042, PII S0045782505002884
-
W.K. Liu, H.S. Park, D. Qian, E.G. Karpov, H. Kadowaki, and G.J. Wagner Bridging scale methods for nanomechanics and materials Computer Methods in Applied Mechanics and Engineering 195 2006 1407 1421 (Pubitemid 43116256)
-
(2006)
Computer Methods in Applied Mechanics and Engineering
, vol.195
, Issue.13-16
, pp. 1407-1421
-
-
Liu, W.K.1
Park, H.S.2
Qian, D.3
Karpov, E.G.4
Kadowaki, H.5
Wagner, G.J.6
-
59
-
-
34249311837
-
Multiscale modeling of physical phenomena: Adaptive control of models
-
DOI 10.1137/050632488
-
J.T. Oden, S. Prudhomme, A. Romkes, and P.T. Bauman Multiscale modeling of physical phenomena: adaptive control of models SIAM Journal on Scientific Computing 29 2006 2359 2389 (Pubitemid 350150417)
-
(2006)
SIAM Journal of Scientific Computing
, vol.28
, Issue.6
, pp. 2359-2389
-
-
Oden, J.T.1
Prudhomme, S.2
Romkes, A.3
Bauman, P.T.4
-
60
-
-
33846005104
-
Concurrent multi-level model for damage evolution in microstructurally debonding composites
-
DOI 10.1016/j.mechmat.2006.05.004, PII S0167663606000688
-
S. Ghosh, J. Bai, and P. Raghavan Concurrent multi-level model for damage evolution in micro structurally debonding composites Mechanics of Materials 39 2007 241 266 (Pubitemid 46048565)
-
(2007)
Mechanics of Materials
, vol.39
, Issue.3
, pp. 241-266
-
-
Ghosh, S.1
Bai, J.2
Raghavan, P.3
-
63
-
-
1842736750
-
Multi-scale constitutive model and computational framework for the design of ultra-high strength, high toughness steels
-
DOI 10.1016/j.cma.2003.12.026, PII S0045782504000362
-
S. Hao, W.K. Liu, B. Moran, F. Vernerey, and G.B. Olson Multi-scale constitutive model and computational framework for the design of ultra-high strength, high toughness steels Computer Methods in Applied Mechanics and Engineering 193 2004 1865 1908 (Pubitemid 38462124)
-
(2004)
Computer Methods in Applied Mechanics and Engineering
, vol.193
, Issue.17-20
, pp. 1865-1908
-
-
Hao, S.1
Liu, W.K.2
Moran, B.3
Vernerey, F.4
Olson, G.B.5
-
69
-
-
28744458307
-
Atomistic based continuum investigation of plastic deformation in nanocrystalline copper
-
DOI 10.1016/j.ijplas.2005.04.014, PII S0749641905001002
-
D.H. Warner, F. Sansoz, and J.F. Molinari Atomistic based continuum investigation of plastic deformation in nanocrystalline copper International Journal of Plasticity 22 2006 754 774 (Pubitemid 41759807)
-
(2006)
International Journal of Plasticity
, vol.22
, Issue.4
, pp. 754-774
-
-
Warner, D.H.1
Sansoz, F.2
Molinari, J.F.3
-
70
-
-
35248833746
-
Dislocation nucleation from bicrystal interfaces and grain boundary ledges: Relationship to nanocrystalline deformation
-
DOI 10.1016/j.jmps.2007.04.001, PII S0022509607000786
-
L. Capolungo, D.E. Spearot, M. Cherkaoui, D.L. McDowell, J. Qu, and K. Jacob dislocation nucleation from bicrystal interfaces and grain boundary ledges: relationship to nanocrystalline deformation Journal of the Mechanics and Physics of Solids 55 2007 2300 2327 (Pubitemid 47562468)
-
(2007)
Journal of the Mechanics and Physics of Solids
, vol.55
, Issue.11
, pp. 2300-2327
-
-
Capolungo, L.1
Spearot, D.E.2
Cherkaoui, M.3
McDowell, D.L.4
Qu, J.5
Jacob, K.I.6
-
71
-
-
0019070179
-
Rice Plastic creep flow effects in the diffusive cavitation of grain-boundaries
-
DOI 10.1016/0001-6160(80)90001-2
-
A. Needleman, and J.R. Rice Plastic creep flow effects in the diffusive cavitation of grain-boundaries Acta Metallurgica 28 1980 1315 1332 (Pubitemid 11442488)
-
(1980)
Acta Metallurgica
, vol.28
, Issue.10
, pp. 1315-1332
-
-
Needleman, A.1
Rice, J.R.2
-
72
-
-
0036682213
-
Role of grain rotation during grain growth in a columnar microstructure by mesoscale simulation
-
DOI 10.1016/S1359-6454(02)00153-2, PII S1359645402001532
-
D. Moldovan, D. Wolf, S.R. Phillpot, and A.J. Haslam Role of grain rotation during grain growth in a columnar microstructure by mesoscale simulation Acta Materialia 50 2002 3397 3414 (Pubitemid 34822251)
-
(2002)
Acta Materialia
, vol.50
, Issue.13
, pp. 3397-3414
-
-
Moldovan, D.1
Wolf, D.2
Phillpot, S.R.3
Haslam, A.J.4
-
73
-
-
0036577369
-
Microstructure evolution from the atomic scale up
-
DOI 10.1016/S0927-0256(02)00160-X, PII S092702560200160X
-
F. Cleri, G. D'Agostino, A. Satta, and L. Colombo Microstructure evolution from the atomic scale up Compuational Materials Science 24 2002 21 27 (Pubitemid 34715341)
-
(2002)
Computational Materials Science
, vol.24
, Issue.1-2
, pp. 21-27
-
-
Cleri, F.1
D'Agostino, G.2
Satta, A.3
Colombo, L.4
-
74
-
-
0037143110
-
Multi-scale constitutive modelling of heterogeneous materials with a gradient-enhanced computational homogenization scheme
-
DOI 10.1002/nme.541
-
V. Kouznetsova, M.G.D. Geers, and W.A.M. Brekelmans Multi-scale constitutive modelling of heterogeneous materials with a gradient-enhanced computational homogenization scheme International Journal for Numerical Methods in Engineering 54 2002 1235 1260 (Pubitemid 34724730)
-
(2002)
International Journal for Numerical Methods in Engineering
, vol.54
, Issue.8
, pp. 1235-1260
-
-
Kouznetsova, V.1
Geers, M.G.D.2
Brekelmans, W.A.M.3
-
75
-
-
8644290775
-
Multi-scale second-order computational homogenization of multi-phase materials: A nested finite element solution strategy
-
DOI 10.1016/j.cma.2003.12.073, PII S0045782504002853, Advances in Computational Plasticity
-
V.G. Kouznetsova, M.G.D. Geers, and W.A.M. Brekelmans Multi-scale second-order computational homogenization of multi-phase materials: a nested finite element solution strategy Computer Methods in Applied Mechanics and Engineering 193 2004 5525 5550 (Pubitemid 39499845)
-
(2004)
Computer Methods in Applied Mechanics and Engineering
, vol.193
, Issue.48-51
, pp. 5525-5550
-
-
Kouznetsova, V.G.1
Geers, M.G.D.2
Brekelmans, W.A.M.3
-
76
-
-
33947266586
-
A second-order homogenization procedure for multi-scale analysis based on micropolar kinematics
-
DOI 10.1002/nme.1854
-
R. Larsson, and S. Diebels A second-order homogenization procedure for multi-scale analysis based on micropolar kinematics International Journal of Numerical Methods in Engineering 69 2007 2485 2512 (Pubitemid 46421596)
-
(2007)
International Journal for Numerical Methods in Engineering
, vol.69
, Issue.12
, pp. 2485-2512
-
-
Larsson, R.1
Diebels, S.2
-
77
-
-
36048952147
-
Multi-scale micromorphic theory for hierarchical materials
-
DOI 10.1016/j.jmps.2007.04.008, PII S0022509607000877
-
F. Vernerey, W.K. Liu, and B. Moran Multi-scale micromorphic theory for hierarchical materials Journal of the Mechanics and Physics of Solids 55 2007 2603 2651 (Pubitemid 350088016)
-
(2007)
Journal of the Mechanics and Physics of Solids
, vol.55
, Issue.12
, pp. 2603-2651
-
-
Vernerey, F.1
Liu, W.K.2
Moran, B.3
-
78
-
-
77955513375
-
A second gradient theoretical framework for hierarchical multiscale modeling of materials
-
D.J. Luscher, D.L. McDowell, and C.A. Bronkhorst A second gradient theoretical framework for hierarchical multiscale modeling of materials International Journal of Plasticity 26 2010 1248 1275
-
(2010)
International Journal of Plasticity
, vol.26
, pp. 1248-1275
-
-
Luscher, D.J.1
McDowell, D.L.2
Bronkhorst, C.A.3
-
79
-
-
84867651119
-
Essential features of fine scale boundary conditions for second gradient multiscale homogenization of statistical volume elements
-
(in press)
-
Luscher DJ, McDowell DL, Bronkhorst CA. Essential features of fine scale boundary conditions for second gradient multiscale homogenization of statistical volume elements, Journal of Multiscale Computational Engineering (in press).
-
Journal of Multiscale Computational Engineering
-
-
Luscher, D.J.1
McDowell, D.L.2
Bronkhorst, C.A.3
-
80
-
-
0023865867
-
A review of experimental-observations and theoretical-models of dislocation cells and subgrains
-
R.J. Amodeo, and N.M. Ghoniem A review of experimental-observations and theoretical-models of dislocation cells and subgrains Res Mechanica 23 1988 137 160
-
(1988)
Res Mechanica
, vol.23
, pp. 137-160
-
-
Amodeo, R.J.1
Ghoniem, N.M.2
-
81
-
-
0026930285
-
The modeling of dislocation patterns
-
L.P. Kubin, and G. Canova The modeling of dislocation patterns Scripta Metallurgica 27 1992 957 962
-
(1992)
Scripta Metallurgica
, vol.27
, pp. 957-962
-
-
Kubin, L.P.1
Canova, G.2
-
82
-
-
0001551582
-
Link between the microscopic and mesoscopic length-scale description of the collective behavior of dislocations
-
I. Groma Link between the microscopic and mesocopic length-scale description of the collective behavior of dislocations Physical Review B 56 1997 5807 5813 (Pubitemid 127489373)
-
(1997)
Physical Review B - Condensed Matter and Materials Physics
, vol.56
, Issue.10
, pp. 5807-5813
-
-
Groma, I.1
-
83
-
-
0035879842
-
Statistical modeling of dislocation systems
-
M. Zaiser Statistical modeling of dislocation systems Material Science and Engineering A 309-310 2001 304 315
-
(2001)
Material Science and Engineering A
, vol.309-310
, pp. 304-315
-
-
Zaiser, M.1
-
84
-
-
0032675618
-
Crystallographic aspects of of geometrically-necessary and statistically-stored dislocation density
-
A. Arsenlis, and D.M. Parks Crystallographic aspects of of geometrically-necessary and statistically-stored dislocation density Acta Materialia 47 1999 1597 1611
-
(1999)
Acta Materialia
, vol.47
, pp. 1597-1611
-
-
Arsenlis, A.1
Parks, D.M.2
-
86
-
-
0035997869
-
A multiscale model of plasticity
-
DOI 10.1016/S0749-6419(01)00044-4, PII S0749641901000444
-
H.M. Zbib, and T.D. de la Rubia A multiscale model of plasticity International Journal of Plasticity 18 2002 1133 1163 (Pubitemid 34660595)
-
(2002)
International Journal of Plasticity
, vol.18
, Issue.9
, pp. 1133-1163
-
-
Zbib, H.M.1
Diaz De La Rubia, T.2
-
87
-
-
1142300601
-
Recent advances in multiscale modeling of plasticity
-
H.M. Zbib, and M.A. Khaleel Recent advances in multiscale modeling of plasticity International Journal of Plasticity 20 6 2004 979 1182
-
(2004)
International Journal of Plasticity
, vol.20
, Issue.6
, pp. 979-1182
-
-
Zbib, H.M.1
Khaleel, M.A.2
-
88
-
-
29844444419
-
Issues in the coarse-graining of dislocation energetics and dynamics
-
DOI 10.1016/j.scriptamat.2005.11.030, PII S1359646205007797, Viewpoint Set no. 39: Statistical Mechanics and Coarse Graning of Dislocation Behavior for Continuum Plasticity
-
J.M. Rickman, and R. LeSar Issues in the coarse-graining of dislocation energetics and dynamics Scripta Materialia 54 2006 735 739 (Pubitemid 43038783)
-
(2006)
Scripta Materialia
, vol.54
, Issue.5
, pp. 735-739
-
-
Rickman, J.M.1
Lesar, R.2
-
89
-
-
33846620515
-
A multiscale approach for modeling scale-dependent yield stress in polycrystalline metals
-
DOI 10.1016/j.ijplas.2006.10.002, PII S074964190600129X
-
T. Ohashi, M. Kawamukai, and H. Zbib A multiscale approach for modeling scale-dependent yield stress in polycrystalline metals International Journal of Plasticity 23 2007 897 914 (Pubitemid 46187318)
-
(2007)
International Journal of Plasticity
, vol.23
, Issue.5
, pp. 897-914
-
-
Ohashi, T.1
Kawamukai, M.2
Zbib, H.3
-
90
-
-
0000364551
-
A model of crystal plasticity based on the theory of continuously distributed dislocations
-
PII S0022509600000600
-
A. Acharya A model of crystal plasticity based on the theory of continuously distributed dislocations Journal of the Mechanics and Physics of Solids 49 2001 761 784 (Pubitemid 33710940)
-
(2001)
Journal of the Mechanics and Physics of Solids
, vol.49
, Issue.4
, pp. 761-784
-
-
Acharya, A.1
-
92
-
-
42549128284
-
New perspectives in plasticity theory: Dislocation nucleation, waves, and partial continuity of plastic strain rate
-
DOI 10.1177/1081286507086903
-
A. Acharya, A.J. Beaudoin, and R. Miller New perspectives in plasticity theory: dislocation nucleation, waves and partial continuity of the plastic strain rate Mathematics and Mechanics of Solids 13 2008 292 315 (Pubitemid 351586106)
-
(2008)
Mathematics and Mechanics of Solids
, vol.13
, Issue.3-4
, pp. 292-315
-
-
Acharya, A.1
Beaudoin, A.2
Miller, R.3
-
93
-
-
29844450754
-
Continuum theory and methods for coarse-grained, mesoscopic plasticity
-
DOI 10.1016/j.scriptamat.2005.10.070, PII S1359646205007062, Viewpoint Set no. 39: Statistical Mechanics and Coarse Graning of Dislocation Behavior for Continuum Plasticity
-
A. Acharya, A. Roy, and A. Sawant Continuum theory and methods for coarse-grained, mesoscopic plasticity Scripta Materialia 54 2006 705 710 (Pubitemid 43038778)
-
(2006)
Scripta Materialia
, vol.54
, Issue.5
, pp. 705-710
-
-
Acharya, A.1
Roy, A.2
Sawant, A.3
-
94
-
-
0024701870
-
Theory of plastic deformation: Properties of low energy dislocation structures
-
D. Kuhlmann-Wilsdorf Theory of plastic deformation: properties of low energy dislocation structures Materials Science and Engineering A 113 1989 1 41
-
(1989)
Materials Science and Engineering A
, vol.113
, pp. 1-41
-
-
Kuhlmann-Wilsdorf, D.1
-
95
-
-
0028666755
-
Lattice rotations during plastic deformation with grain subdivision
-
T. Leffers Lattice rotations during plastic deformation with grain subdivision Materials Science Forum 157-162 1994 1815 1820
-
(1994)
Materials Science Forum
, vol.157-162
, pp. 1815-1820
-
-
Leffers, T.1
-
96
-
-
0030819332
-
Scaling of microstructural parameters: Misorientations of deformation induced boundaries
-
PII S135964549600153X
-
D.A. Hughes, Q. Liu, D.C. Chrzan, and N. Hansen Scaling of microstructural parameters: misorientations of deformation induced boundaries Acta Materialia 45 1997 105 112 (Pubitemid 127413961)
-
(1997)
Acta Materialia
, vol.45
, Issue.1
, pp. 105-112
-
-
Hughes, D.A.1
Liu, Q.2
Chrzan, D.C.3
Hansen, N.4
-
99
-
-
33947106582
-
The mechanics and physics of defect nucleation
-
J. Li The mechanics and physics of defect nucleation MRS Bulletin 32 2007 151 159 (Pubitemid 46396572)
-
(2007)
MRS Bulletin
, vol.32
, Issue.2
, pp. 151-159
-
-
Li, J.1
-
100
-
-
33847666430
-
Interfacial plasticity governs strain rate sensitivity and ductility in nanostructured metals
-
DOI 10.1073/pnas.0611097104
-
T. Zhu, L. Li, A. Samanta, H.G. Kim, and S. Suresh Interfacial plasticity governs strain rate sensitivity and ductility in nanostructured metals Proceedings of the National Academy of Sciences of the United States of America 104 2007 3031 3036 (Pubitemid 46364108)
-
(2007)
Proceedings of the National Academy of Sciences of the United States of America
, vol.104
, Issue.9
, pp. 3031-3036
-
-
Zhu, T.1
Li, J.2
Samanta, A.3
Kim, H.G.4
Suresh, S.5
-
101
-
-
38349169607
-
Temperature and strain-rate dependence of surface dislocation nucleation
-
T. Zhu, L. Li, A. Samanta, A. Leach, and K. Gall Temperature and strain-rate dependence of surface dislocation nucleation Physical Review Letters 100 2008 025502
-
(2008)
Physical Review Letters
, vol.100
, pp. 025502
-
-
Zhu, T.1
Li, L.2
Samanta, A.3
Leach, A.4
Gall, K.5
-
102
-
-
0036735454
-
First passage time Markov chain analysis ox rare events for kinetic Monte Carlo: Double kink nucleation during dislocation glide
-
DOI 10.1088/0965-0393/10/5/308, PII S0965039302392325
-
C.S. Deo, and D.J. Srolovitz First passage time Markov chain analysis of rare events for kinetic Monte Carlo: double kink nucleation during dislocation glide Modeling and Simulation in Materials Science and Engineering 10 2002 581 596 (Pubitemid 35039732)
-
(2002)
Modelling and Simulation in Materials Science and Engineering
, vol.10
, Issue.5
, pp. 581-596
-
-
Deo, C.S.1
Srolovitz, D.J.2
-
103
-
-
34548490943
-
Deciding the nature of the coarse equation through microscopic simulations: The baby-bathwater scheme
-
DOI 10.1137/070692303
-
J. Li, P.G. Kevrekidis, C.W. Gear, and I.G. Kevrekidis Deciding the nature of the coarse equation through microscopic simulations: the baby-bathwater scheme SIAM Review 49 2007 469 487 (Pubitemid 47377696)
-
(2007)
SIAM Review
, vol.49
, Issue.3
, pp. 469-487
-
-
Li, J.1
Kevrekidis, P.G.2
Gear, C.W.3
Kevrekidis, I.G.4
-
104
-
-
0026832858
-
Micromechanical modelling of interfacial decohesion
-
A. Needleman Micromechanical modelling of interfacial decohesion Ultramicroscopy 40 3 1992 203 214
-
(1992)
Ultramicroscopy
, vol.40
, Issue.3
, pp. 203-214
-
-
Needleman, A.1
-
105
-
-
0030212427
-
Computational modelling of impact damage in brittle materials
-
PII S0020768395002553
-
G. Camacho, and M. Ortiz Computational modeling of impact damage in brittle materials International Journal of Solids Structures 33 1996 2899 2938 (Pubitemid 126377006)
-
(1996)
International Journal of Solids and Structures
, vol.33
, Issue.20-22
, pp. 2899-2938
-
-
Camacho, G.T.1
Ortiz, M.2
-
106
-
-
12344299450
-
Micromechanical simulation of dynamic fracture using the cohesive finite element method
-
DOI 10.1115/1.1647127
-
J. Zhai, V. Tomar, and M. Zhou Micromechanical simulation of dynamic fracture using the cohesive finite element method Journal of Engineering Materials and Technology, ASME 126 2004 179 191 (Pubitemid 40122750)
-
(2004)
Journal of Engineering Materials and Technology, Transactions of the ASME
, vol.126
, Issue.2
, pp. 179-191
-
-
Zhai, J.1
Tomar, V.2
Zhou, M.3
-
107
-
-
18144420423
-
Deterministic and stochastic analyses of fracture processes in a brittle microstructure system
-
DOI 10.1016/j.engfracmech.2004.06.006, PII S0013794405000305
-
V. Tomar, and M. Zhou Deterministic and stochastic analyses of fracture processes in a brittle microstructure system Engineering Fracture Mechanics 72 2005 1920 1941 (Pubitemid 40622013)
-
(2005)
Engineering Fracture Mechanics
, vol.72
, Issue.12 SPEC. ISSUE
, pp. 1920-1941
-
-
Tomar, V.1
Zhou, M.2
-
111
-
-
0031169474
-
Design of materials with extreme thermal expansion using a three-phase topology optimization method
-
PII S0022509696001147
-
O. Sigmund, and S. Torquato Design of materials with extreme thermal expansion using a three-phase topology optimization method Journal of the Mechanics and Physics of Solids 45 1997 1037 1067 (Pubitemid 127403332)
-
(1997)
Journal of the Mechanics and Physics of Solids
, vol.45
, Issue.6
, pp. 1037-1067
-
-
Sigmund, O.1
Torquato, S.2
-
112
-
-
0028499421
-
Materials with prescribed constitutive parameters: An inverse homogenization problem
-
O. Sigmund Materials with prescribed constitutive parameters: an inverse homogenization problem International Journal of Solids and Structures 31 1994 2313 2329
-
(1994)
International Journal of Solids and Structures
, vol.31
, pp. 2313-2329
-
-
Sigmund, O.1
-
113
-
-
0029325144
-
Tailoring materials with prescribed elastic properties
-
O. Sigmund Tailoring materials with prescribed elastic properties Mechanics of Materials 20 1995 351 368
-
(1995)
Mechanics of Materials
, vol.20
, pp. 351-368
-
-
Sigmund, O.1
-
114
-
-
0034159025
-
Multiphase composites with extremal bulk modulus
-
DOI 10.1016/S0022-5096(99)00043-5
-
L.V. Gibiansky, and O. Sigmund Multiphase composites with extremal bulk modulus Journal of the Mechanics and Physics of Solids 48 2000 461 498 (Pubitemid 30562161)
-
(2000)
Journal of the Mechanics and Physics of Solids
, vol.48
, Issue.3
, pp. 461-498
-
-
Gibiansky, L.V.1
Sigmund, O.2
-
115
-
-
0033894761
-
Optimal design of periodic linear elastic microstructures
-
DOI 10.1016/S0045-7949(99)00172-8
-
M.M. Neves, H. Rodrigues, and J.M. Guedes Optimal design of periodic linear elastic microstructures Computers & Structures 76 2000 421 429 (Pubitemid 30589536)
-
(2000)
Computers and Structures
, vol.76
, Issue.1
, pp. 421-429
-
-
Neves, M.M.1
Rodrigues, H.2
Guedes, J.M.3
-
116
-
-
0035938218
-
On the design of two-dimensional cellular metals for combined heat dissipation and structural load capacity
-
S. Gu, T.J. Lu, and A.G. Evans On the design of two-dimensional cellular metals for combined heat dissipation and structural load capacity International Journal of Heat and Mass Transfer 44 2001 2163 2175
-
(2001)
International Journal of Heat and Mass Transfer
, vol.44
, pp. 2163-2175
-
-
Gu, S.1
Lu, T.J.2
Evans, A.G.3
-
117
-
-
34247159639
-
Fast computation of first-order elastic-plastic closures for polycrystalline cubic-orthorhombic microstructures
-
DOI 10.1016/j.commatsci.2006.08.025, PII S0927025606002564
-
M. Knezevic, and S.R. Kalidindi Fast computation of first-order elastic-plastic closures for polycrystalline cubic-orthorhombic microstructures Computational Materials Science 39 2007 643 648 (Pubitemid 46602952)
-
(2007)
Computational Materials Science
, vol.39
, Issue.3
, pp. 643-648
-
-
Knezevic, M.1
Kalidindi, S.R.2
-
118
-
-
0035426841
-
Microstructure-sensitive design of a compliant beam
-
DOI 10.1016/S0022-5096(01)00016-3, PII S0022509601000163
-
B.L. Adams, A. Henrie, B. Henrie, M. Lyon, S.R. Kalidindi, and H. Garmestani Microstructure-sensitive design of a compliant beam Journal of the Mechanics and Physics of Solids 49 2001 1639 1663 (Pubitemid 32645560)
-
(2001)
Journal of the Mechanics and Physics of Solids
, vol.49
, Issue.8
, pp. 1639-1663
-
-
Adams, B.L.1
Henrie, A.2
Henrie, B.3
Lyon, M.4
Kalidindi, S.R.5
Garmestani, H.6
-
119
-
-
33646849451
-
Procedures for construction of anisotropic elastic-plastic property closures for face-centered cubic polycrystals using first-order bounding relations
-
DOI 10.1016/j.jmps.2006.01.010, PII S0022509606000342
-
G. Proust, and S.R. Kalidindi Procedures for construction of anisotropic elastic-plastic property closures for face-centered cubic polycrystals using first-order bounding relations Journal of the Mechanics and Physics of Solids 54 2006 1744 1762 (Pubitemid 43776864)
-
(2006)
Journal of the Mechanics and Physics of Solids
, vol.54
, Issue.8
, pp. 1744-1762
-
-
Proust, G.1
Kalidindi, S.R.2
-
120
-
-
38049129281
-
Integration of microstructure-sensitive design with finite element methods: Elastic-plastic case studies in FCC polycrystals
-
J.R. Houskamp, G. Proust, and S.R. Kalidindi Integration of microstructure-sensitive design with finite element methods: elastic-plastic case studies in FCC polycrystals International Journal for Multiscale Computational Engineering 5 2007 261 272
-
(2007)
International Journal for Multiscale Computational Engineering
, vol.5
, pp. 261-272
-
-
Houskamp, J.R.1
Proust, G.2
Kalidindi, S.R.3
-
121
-
-
35748972651
-
Delineation of first-order closures for plastic properties requiring explicit consideration of strain hardening and crystallographic texture evolution
-
DOI 10.1016/j.ijplas.2007.05.002, PII S0749641907000812
-
M. Knezevic, S.R. Kalidindi, and R.K. Mishra Delineation of first-order closures for plastic properties requiring explicit consideration of strain hardening and crystallographic texture evolution International Journal of Plasticity 24 2008 327 342 (Pubitemid 350051698)
-
(2008)
International Journal of Plasticity
, vol.24
, Issue.2
, pp. 327-342
-
-
Knezevic, M.1
Kalidindi, S.R.2
Mishra, R.K.3
-
122
-
-
34047151824
-
Elastic-plastic property closures for hexagonal close-packed polycrystalline metals using first-order bounding theories
-
DOI 10.1016/j.actamat.2006.12.010, PII S1359645407000171
-
X. Wu, G. Proust, M. Knezevic, and S.R. Kalidindi Elastic-plastic property closures for hexagonal close-packed polycrystalline metals using first-order bounding theories Acta Materialia 55 2007 2729 2737 (Pubitemid 46528819)
-
(2007)
Acta Materialia
, vol.55
, Issue.8
, pp. 2729-2737
-
-
Wu, X.1
Proust, G.2
Knezevic, M.3
Kalidindi, S.R.4
-
123
-
-
77955493426
-
Building texture evolution networks for deformation processing of polycrystalline FCC metals using spectral approaches: Applications to process design for targeted performance
-
J.B. Shaffer, M. Knezevic, and S.R. Kalidindi Building texture evolution networks for deformation processing of polycrystalline FCC metals using spectral approaches: applications to process design for targeted performance International Journal of Plasticity 26 2010 1183 1194
-
(2010)
International Journal of Plasticity
, vol.26
, pp. 1183-1194
-
-
Shaffer, J.B.1
Knezevic, M.2
Kalidindi, S.R.3
-
124
-
-
33846236532
-
Generalized Pareto front methods applied to second-order material property closures
-
DOI 10.1016/j.commatsci.2006.05.016, PII S0927025606001807
-
D.T. Fullwood, B.L. Adams, and S.R. Kalidindi Generalized Pareto front methods applied to second-order material property closures Computational Materials Science 38 2007 788 799 (Pubitemid 46109280)
-
(2007)
Computational Materials Science
, vol.38
, Issue.4
, pp. 788-799
-
-
Fullwood, D.T.1
Adams, B.L.2
Kalidindi, S.R.3
-
125
-
-
20644431588
-
Finite approximations to the second-order properties closure in single phase polycrystals
-
DOI 10.1016/j.actamat.2005.03.052, PII S1359645405002235
-
B.L. Adams, G. Xiang, and S.R. Kalidindi Finite approximations to the second-order properties closure in single phase polycrystals Acta Materialia 53 2005 3563 3577 (Pubitemid 40833840)
-
(2005)
Acta Materialia
, vol.53
, Issue.13
, pp. 3563-3577
-
-
Adams, B.L.1
Gao, X.2
Kalidindi, S.R.3
-
127
-
-
78449260300
-
A new framework for computationally efficient structure-structure evolution linkages to facilitate high-fidelity scale bridging in multi-scale materials models
-
T. Fast, S.R. Niezgoda, and S.R. Kalidindi A new framework for computationally efficient structure-structure evolution linkages to facilitate high-fidelity scale bridging in multi-scale materials models Acta Materialia 59 2011 699 707
-
(2011)
Acta Materialia
, vol.59
, pp. 699-707
-
-
Fast, T.1
Niezgoda, S.R.2
Kalidindi, S.R.3
-
128
-
-
78349243702
-
A novel framework for building materials knowledge systems
-
S.R. Kalidindi, S.R. Niezgoda, G. Landi, S. Vachhani, and A. Fast A novel framework for building materials knowledge systems Computers Materials & Continua 17 2009 103 126
-
(2009)
Computers Materials & Continua
, vol.17
, pp. 103-126
-
-
Kalidindi, S.R.1
Niezgoda, S.R.2
Landi, G.3
Vachhani, S.4
Fast, A.5
-
129
-
-
77956371591
-
Thermo-elastic localization relationships for multi-phase composites
-
G. Landi, and S.R. Kalidindi Thermo-elastic localization relationships for multi-phase composites Computers, Materials & Continua 16 2010 273 293
-
(2010)
Computers, Materials & Continua
, vol.16
, pp. 273-293
-
-
Landi, G.1
Kalidindi, S.R.2
-
130
-
-
77249164958
-
Multi-scale modeling of elastic response of three-dimensional voxel-based microstructure datasets using novel DFT-based knowledge systems
-
G. Landi, S.R. Niezgoda, and S.R. Kalidindi Multi-scale modeling of elastic response of three-dimensional voxel-based microstructure datasets using novel DFT-based knowledge systems Acta Materialia 58 2009 2716 2725
-
(2009)
Acta Materialia
, vol.58
, pp. 2716-2725
-
-
Landi, G.1
Niezgoda, S.R.2
Kalidindi, S.R.3
-
131
-
-
79956011479
-
Formulation and calibration of higher-order elastic localization relationships using the MKS approach
-
T. Fast, and S.R. Kalidindi Formulation and calibration of higher-order elastic localization relationships using the MKS approach Acta Materialia 59 2011 4595 4605
-
(2011)
Acta Materialia
, vol.59
, pp. 4595-4605
-
-
Fast, T.1
Kalidindi, S.R.2
-
132
-
-
0002813430
-
Statistical modelling
-
J. Gittus, J. Zarka, Elsevier Science Publishers London
-
E. Kröner Statistical modelling J. Gittus, J. Zarka, Modelling small deformations of polycrystals 1986 Elsevier Science Publishers London 229 291
-
(1986)
Modelling Small Deformations of Polycrystals
, pp. 229-291
-
-
Kröner, E.1
-
133
-
-
0002531324
-
Bounds for effective elastic moduli of disordered materials
-
E. Kröner Bounds for effective elastic moduli of disordered materials Journal of the Mechanics and Physics of Solids 25 1977 137 155
-
(1977)
Journal of the Mechanics and Physics of Solids
, vol.25
, pp. 137-155
-
-
Kröner, E.1
-
136
-
-
0034826312
-
Statistical continuum theory for large plastic deformation of polycrystalline materials
-
DOI 10.1016/S0022-5096(00)00040-5
-
H. Garmestani, S. Lin, B.L. Adams, and S. Ahzi Statistical continuum theory for large plastic deformation of polycrystalline materials Journal of the Mechanics and Physics of Solids 49 2001 589 607 (Pubitemid 32875516)
-
(2001)
Journal of the Mechanics and Physics of Solids
, vol.49
, Issue.3
, pp. 589-607
-
-
Garmestani, H.1
Lin, S.2
Adams, B.L.3
Ahzi, S.4
-
137
-
-
0033901606
-
Statistical continuum mechanics analysis of an elastic two-isotropic-phase composite material
-
S. Lin, and H. Garmestani Statistical continuum mechanics analysis of an elastic two-isotropic-phase composite material Composites Part B: Engineering 31 2000 39 46 (Pubitemid 30576612)
-
(2000)
Composites Part B: Engineering
, vol.31
, Issue.1
, pp. 39-46
-
-
Lin, S.1
Garmestani, H.2
-
139
-
-
0032307813
-
Statistical continuum theory for inelastic behavior of a two-phase medium
-
PII S0749641998000199
-
H. Garmestani, S. Lin, and B.L. Adams Statistical continuum theory for inelastic behavior of a two-phase medium International Journal of Plasticity 14 1998 719 731 (Pubitemid 128674987)
-
(1998)
International Journal of Plasticity
, vol.14
, Issue.8
, pp. 719-731
-
-
Garmestani, H.1
Lin, S.2
Adams, B.L.3
-
140
-
-
0030244377
-
Bounding elastic constants of an orthotropic polycrystal using measurements of the microstructure
-
DOI 10.1016/0022-5096(96)00052-X, PII S002250969600052X
-
M.J. Beran, T.A. Mason, B.L. Adams, and T. Olsen Bounding elastic constants of an orthotropic polycrystal using measurements of the microstructure Journal of the Mechanics and Physics of Solids 44 1996 1543 1563 (Pubitemid 126370890)
-
(1996)
Journal of the Mechanics and Physics of Solids
, vol.44
, Issue.9
, pp. 1543-1563
-
-
Beran, M.J.1
Mason, T.A.2
Adams, B.L.3
Olsen, T.4
-
142
-
-
0004025336
-
-
P.G. Ciarlet, A. Iserles, R.V. Khon, M.H. Wright, Cambridge monographs on applied and computational mathematics Cambridge University Press Cambridge
-
G.W. Milton P.G. Ciarlet, A. Iserles, R.V. Khon, M.H. Wright, The theory of composites Cambridge monographs on applied and computational mathematics 2002 Cambridge University Press Cambridge
-
(2002)
The Theory of Composites
-
-
Milton, G.W.1
-
144
-
-
0028733792
-
Calculation of the Volterra kernels of non-linear dynamic systems using an artificial neural network
-
J. Wray, and G. Green Calculation of the Volterra kernels of non-linear dynamic systems using an artificial neural network Biological Cybernetics 71 1994 187 195
-
(1994)
Biological Cybernetics
, vol.71
, pp. 187-195
-
-
Wray, J.1
Green, G.2
-
145
-
-
0029669428
-
The identification of nonlinear biological systems: Volterra kernel approaches
-
M. Korenberg, and I. Hunter The identification of nonlinear biological systems: volterra kernel approaches Annals of Biomedical Engineering 24 1996 250 268
-
(1996)
Annals of Biomedical Engineering
, vol.24
, pp. 250-268
-
-
Korenberg, M.1
Hunter, I.2
-
146
-
-
84943460003
-
Measurement of the wiener kernels of a non-linear system by cross-correlation
-
Y.W. Lee, and M. Schetzen Measurement of the wiener kernels of a non-linear system by cross-correlation International Journal of Control 2 1965 237 254
-
(1965)
International Journal of Control
, vol.2
, pp. 237-254
-
-
Lee, Y.W.1
Schetzen, M.2
-
147
-
-
77954791602
-
Building effective models from sparse but precise data: Application to an alloy cluster expansion model
-
E. Cockayne, and A. van de Walle Building effective models from sparse but precise data: application to an alloy cluster expansion model Physical Review B 81 2009 012104
-
(2009)
Physical Review B
, vol.81
, pp. 012104
-
-
Cockayne, E.1
Van De Walle, A.2
-
148
-
-
0038036238
-
Bayesian model screening for the identification of nonlinear mechanical structures
-
G. Kerschen, J.-C. Golinval, and F.M. Hemez Bayesian model screening for the identification of nonlinear mechanical structures Journal of Vibration and Acoustics 125 2003 389 397
-
(2003)
Journal of Vibration and Acoustics
, vol.125
, pp. 389-397
-
-
Kerschen, G.1
Golinval, J.-C.2
Hemez, F.M.3
-
151
-
-
2942602598
-
Application of the dual-beam FIB/SEM to metals research
-
DOI 10.1111/j.0022-2720.2004.01329.x
-
V.G. Sivel, J. Van den Brand, W.R. Wang, H. Mohdadi, F.D. Tichelaar, and P. Alkemade Application of the dual-beam fib/sem to metals research Journal of Microscopy 21 2004 237 245 (Pubitemid 38746177)
-
(2004)
Journal of Microscopy
, vol.214
, Issue.3
, pp. 237-245
-
-
Sivel, V.G.M.1
Van Den Brand, J.2
Wang, W.R.3
Mohdadi, H.4
Tichelaar, F.D.5
Alkemade, P.F.A.6
Zandbergen, H.W.7
-
154
-
-
33646199191
-
Automated serial sectioning for 3-d analysis of microstructures
-
J.E. Spowart Automated serial sectioning for 3-d analysis of microstructures Scripta Materialia 55 2006 5 10
-
(2006)
Scripta Materialia
, vol.55
, pp. 5-10
-
-
Spowart, J.E.1
-
155
-
-
0037246858
-
X-ray micro-tomography an attractive characterisation technique in materials science
-
L. Salvo, P. Cloetens, E. Maire, S. Zabler, J.J. Blandin, and J.Y. Buffiére X-ray micro-tomography an attractive characterisation technique in materials science Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 200 2003 273 286
-
(2003)
Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
, vol.200
, pp. 273-286
-
-
Salvo, L.1
Cloetens, P.2
Maire, E.3
Zabler, S.4
Blandin, J.J.5
Buffiére, J.Y.6
-
156
-
-
0038641055
-
3D electron microscopy in the physical sciences: The development of Z-contrast and EFTEM tomography
-
DOI 10.1016/S0304-3991(03)00105-0
-
P.A. Midgley, and M. Weyland 3-D electron microscopy in the physical sciences: the development of Z-contrast and EFTEM tomography Ultramicroscopy 96 2003 413 431 (Pubitemid 36840895)
-
(2003)
Ultramicroscopy
, vol.96
, Issue.3-4
, pp. 413-431
-
-
Midgley, P.A.1
Weyland, M.2
-
157
-
-
65349124773
-
A new methodology based on X-ray micro-tomography to estimate stress concentrations around inclusions in high strength steels
-
A. Stiénon, A. Fazekas, J.Y. Buffière, A. Vincent, P. Daguier, and F. Merchi A new methodology based on X-ray micro-tomography to estimate stress concentrations around inclusions in high strength steels Materials Science and Engineering: A 513-514 2009 376 383
-
(2009)
Materials Science and Engineering: A
, vol.513-514
, pp. 376-383
-
-
Stiénon, A.1
Fazekas, A.2
Buffière, J.Y.3
Vincent, A.4
Daguier, P.5
Merchi, F.6
-
158
-
-
33846170583
-
Three-dimensional study of a fretting crack using synchrotron X-ray micro-tomography
-
DOI 10.1016/j.engfracmech.2006.06.019, PII S0013794406002475
-
H. Proudhon, J.Y. Buffière, and S. Fouvry Three-dimensional study of a fretting crack using synchrotron X-ray micro-tomography Engineering Fracture Mechanics 74 5 2007 782 793 (Pubitemid 46074621)
-
(2007)
Engineering Fracture Mechanics
, vol.74
, Issue.5
, pp. 782-793
-
-
Proudhon, H.1
Buffiere, J.-Y.2
Fouvry, S.3
-
159
-
-
34948910702
-
3SN multifilamentary superconducting wires
-
DOI 10.1016/j.fusengdes.2006.11.003, PII S0920379606003711, Proceedings of the 24th Symposium on Fusion Technology SOFT-24
-
I. Tiseanu, T. Craciunescu, T. Petrisor, and A.D. Corte 3-D X-ray micro-tomography for modeling of NB3SN multifilamentary superconducting wires Fusion Engineering and Design 82 5-14 2007 1447 1453 (Pubitemid 47532407)
-
(2007)
Fusion Engineering and Design
, vol.82
, Issue.5-14
, pp. 1447-1453
-
-
Tiseanu, I.1
Craciunescu, T.2
Petrisor, T.3
Corte, A.D.4
-
161
-
-
53249130972
-
Towards better 3-D reconstructions by combining electron tomography and atom-probe tomography
-
I. Arslan, E.A. Marquis, M. Homer, M.A. Hekmaty, and N.C. Bartelt Towards better 3-D reconstructions by combining electron tomography and atom-probe tomography Ultramicroscopy 108 12 2008 1579 1585
-
(2008)
Ultramicroscopy
, vol.108
, Issue.12
, pp. 1579-1585
-
-
Arslan, I.1
Marquis, E.A.2
Homer, M.3
Hekmaty, M.A.4
Bartelt, N.C.5
-
162
-
-
77955424420
-
Three-dimensional analysis of grain topology and interface curvature in a β-titanium alloy
-
D.J. Rowenhorst, A.C. Lewis, and G. Spanos Three-dimensional analysis of grain topology and interface curvature in a β-titanium alloy Acta Materialia 58 16 2010 5511 5519
-
(2010)
Acta Materialia
, vol.58
, Issue.16
, pp. 5511-5519
-
-
Rowenhorst, D.J.1
Lewis, A.C.2
Spanos, G.3
-
164
-
-
23144454443
-
Constraints on microstructural two-point correlation functions
-
DOI 10.1016/j.scriptamat.2005.06.013, PII S1359646205003702
-
A.M. Gokhale, A. Tewari, and H. Garmestani Constraints on microstructural two-point correlation functions Scripta Materialia 53 2005 989 993 (Pubitemid 41084877)
-
(2005)
Scripta Materialia
, vol.53
, Issue.8
, pp. 989-993
-
-
Gokhale, A.M.1
Tewari, A.2
Garmestani, H.3
-
165
-
-
53049105643
-
Delineation of the space of 2-point correlations in a composite material system
-
S.R. Niezgoda, D.T. Fullwood, and S.R. Kalidindi Delineation of the space of 2-point correlations in a composite material system Acta Materialia 56 2008 5285 5292
-
(2008)
Acta Materialia
, vol.56
, pp. 5285-5292
-
-
Niezgoda, S.R.1
Fullwood, D.T.2
Kalidindi, S.R.3
-
166
-
-
79955866796
-
Optimized structure based representative volume element sets reflecting the ensemble averaged 2-point statistics
-
S.R. Niezgoda, D.M. Turner, D.T. Fullwood, and S.R. Kalidindi Optimized structure based representative volume element sets reflecting the ensemble averaged 2-point statistics Acta Materialia 58 2010 4432 4445
-
(2010)
Acta Materialia
, vol.58
, pp. 4432-4445
-
-
Niezgoda, S.R.1
Turner, D.M.2
Fullwood, D.T.3
Kalidindi, S.R.4
-
170
-
-
0019540987
-
On the quantitative definition of risk
-
S. Kaplan, and B.J. Garrick On the quantitative definition of risk Risk Analysis 1 1981 11 26
-
(1981)
Risk Analysis
, vol.1
, pp. 11-26
-
-
Kaplan, S.1
Garrick, B.J.2
-
171
-
-
33947197638
-
A framework for understanding uncertainty and its mitigation and exploitation in complex systems
-
DOI 10.1109/EMR.2006.261384
-
H. McManus, and D. Hastings A framework for understanding uncertainty and its mitigation and exploitation in complex systems IEEE Engineering Management Review 34 3 2006 81 94 (Pubitemid 46432447)
-
(2006)
IEEE Engineering Management Review
, vol.34
, Issue.3
, pp. 81-94
-
-
McManus, H.1
Hastings, D.2
-
172
-
-
3343008964
-
Model validation via uncertainty propagation and data transformations
-
W. Chen, L. Baghdasaryan, T. Buranathiti, and J. Cao Model validation via uncertainty propagation and data transformations AIAA Journal 42 2004 1406 1415
-
(2004)
AIAA Journal
, vol.42
, pp. 1406-1415
-
-
Chen, W.1
Baghdasaryan, L.2
Buranathiti, T.3
Cao, J.4
-
173
-
-
44649093936
-
An inductive design exploration method for robust multiscale materials design
-
(031402)1-13
-
H.-J. Choi, D.L. McDowell, D. Rosen, J.K. Allen, and F. Mistree An inductive design exploration method for robust multiscale materials design ASME Journal of Mechanical Design 130 2008 (031402)1-13
-
(2008)
ASME Journal of Mechanical Design
, vol.130
-
-
Choi, H.-J.1
McDowell, D.L.2
Rosen, D.3
Allen, J.K.4
Mistree, F.5
-
176
-
-
56449100211
-
A comparative study of uncertainty propagation methods for black-box-type problems
-
S.H. Lee, and W. Chen A comparative study of uncertainty propagation methods for black-box-type problems Structural and Mulidisciplinary Optimization 37 2009 239 253
-
(2009)
Structural and Mulidisciplinary Optimization
, vol.37
, pp. 239-253
-
-
Lee, S.H.1
Chen, W.2
-
177
-
-
77953698661
-
Efficient random field uncertainty propagation in design using multiscale analysis
-
(1-10)
-
X. Yin, S. Lee, W. Chen, W.K. Liu, and M.F. Horstemeyer Efficient random field uncertainty propagation in design using multiscale analysis Journal of Mechancial Design 131 2009 021006(1-10)
-
(2009)
Journal of Mechancial Design
, vol.131
, pp. 021006
-
-
Yin, X.1
Lee, S.2
Chen, W.3
Liu, W.K.4
Horstemeyer, M.F.5
-
178
-
-
38849172310
-
-
Sandia National Laboratories Report Number: SAND2007-0939
-
Ferson S, Kreinovich V, Hajagos J, Oberkampf W, Ginzburg L. Experimental uncertainty estimation and statistics for data having interval uncertainty, Sandia National Laboratories, 2007, Report Number: SAND2007-0939.
-
(2007)
Experimental Uncertainty Estimation and Statistics for Data Having Interval Uncertainty
-
-
Ferson, S.1
Kreinovich, V.2
Hajagos, J.3
Oberkampf, W.4
Ginzburg, L.5
-
180
-
-
33746444954
-
Robust design for multiscale and multidisciplinary applications
-
DOI 10.1115/1.2202880
-
J.K. Allen, C.C. Seepersad, H.-J. Choi, and F. Mistree Robust design for multidisciplinary and multiscale applications ASME Journal of Mechanical Design 128 2006 832 843 (Pubitemid 44123172)
-
(2006)
Journal of Mechanical Design, Transactions of the ASME
, vol.128
, Issue.4
, pp. 832-843
-
-
Allen, J.K.1
Seepersad, C.2
Choi, H.J.3
Mistree, F.4
-
181
-
-
34547512444
-
Reliability-based design using variable fidelity optimization
-
S.E. Gano, H. Agarwal, J.E. Renaud, and A. Tovar Reliability-based design using variable fidelity optimization Structure and Infrastructure Engineering: Maintenance, Management, Lifecycle 2 2006 247 260
-
(2006)
Structure and Infrastructure Engineering: Maintenance, Management, Lifecycle
, vol.2
, pp. 247-260
-
-
Gano, S.E.1
Agarwal, H.2
Renaud, J.E.3
Tovar, A.4
-
183
-
-
0000941190
-
A robust concept exploration method for enhancing productivity in concurrent systems design
-
W. Chen, J.K. Allen, and F. Mistree A robust concept exploration method for enhancing productivity in concurrent systems design Concurrent Engineering: Research and Applications 5 1997 203 217 (Pubitemid 127679914)
-
(1997)
Concurrent Engineering Research and Applications
, vol.5
, Issue.3
, pp. 203-217
-
-
Chen, W.1
Allen, J.K.2
Mistree, F.3
-
184
-
-
0001671714
-
The compromise decision support problem and the adaptive linear programming algorithm
-
M. Kamat, AIAA Washington, DC
-
F. Mistree, O. Hughes, and B. Bras The compromise decision support problem and the adaptive linear programming algorithm M. Kamat, Structural optimization: status and promise 1992 AIAA Washington, DC 251 290
-
(1992)
Structural Optimization: Status and Promise
, pp. 251-290
-
-
Mistree, F.1
Hughes, O.2
Bras, B.3
-
185
-
-
0030388418
-
A procedure for robust design: Minimizing variations caused by noise factors and control factors
-
W. Chen, J.K. Allen, K.-L. Tsui, and F. Mistree A procedure for robust design: minimizing variations caused by noise factors and control factors ASME Journal of Mechanical Design 118 1996 478 485 (Pubitemid 126663988)
-
(1996)
Journal of Mechanical Design, Transactions of the ASME
, vol.118
, Issue.4
, pp. 478-485
-
-
Chen, W.1
Allen, J.K.2
Tsui, K.-L.3
Mistree, F.4
-
186
-
-
0034765872
-
Product platform design: Method and application
-
DOI 10.1007/s001630100002
-
T. Simpson, J. Maier, and F. Mistree Product platform design: method and application Research in Engineering Design 13 2001 2 22 (Pubitemid 33046252)
-
(2001)
Research in Engineering Design - Theory, Applications, and Concurrent Engineering
, vol.13
, Issue.1
, pp. 2-22
-
-
Simpson, T.W.1
Maier, J.R.2
Mistree, F.3
-
187
-
-
0029226115
-
Multidisciplinary stochastic optimization
-
Boulder, CO
-
Sues RH, Oakley DR, Rhodes GS. Multidisciplinary stochastic optimization, in: 10th conference on engineering mechanics, Boulder, CO, 1995, 934-7.
-
(1995)
10th Conference on Engineering Mechanics
, pp. 934-937
-
-
Sues, R.H.1
Oakley, D.R.2
Rhodes, G.S.3
-
188
-
-
0031646745
-
Performance optimization of multidisciplinary mechanical systems subject to uncertainties
-
PII S0266892097000040
-
D.R. Oakley, R.H. Sues, and G.S. Rhodes Performance optimization of multidisciplinary mechanical systems subject to uncertainties Probabilistic Engineering Mechanics 13 1998 15 26 (Pubitemid 128378465)
-
(1998)
Probabilistic Engineering Mechanics
, vol.13
, Issue.1
, pp. 15-26
-
-
Oakley, D.R.1
Sues, R.H.2
Rhodes, G.S.3
-
189
-
-
0036493474
-
Efficient uncertainty analysis methods for multidisciplinary robust design
-
X. Du, and W. Chen Efficient uncertainty analysis methods for multidisciplinary robust design AIAA Journal 40 2002 545 552 (Pubitemid 34554616)
-
(2002)
AIAA Journal
, vol.40
, Issue.3
, pp. 545-552
-
-
Du, X.1
Chen, W.2
-
190
-
-
0000693088
-
Worst case propagated uncertainty of multidisciplinary systems in robust design optimization
-
X. Gu, J.E. Renaud, S.M. Batill, R.M. Brach, and A.S. Budhiraja Worst case propagated uncertainty of multidisciplinary systems in robust design optimization Structural and Multidisciplinary Optimization 20 2000 190 213
-
(2000)
Structural and Multidisciplinary Optimization
, vol.20
, pp. 190-213
-
-
Gu, X.1
Renaud, J.E.2
Batill, S.M.3
Brach, R.M.4
Budhiraja, A.S.5
-
191
-
-
33746405143
-
Probabilistic analytical target cascading: A moment matching formulation for multilevel optimization under uncertainty
-
DOI 10.1115/1.2205870
-
H. Liu, W. Chen, M. Kokkolaras, P.Y. Papalambros, and H.M. Kim Probabilistic analytical target cascading: a moment matching formulation for multilevel optimization under uncertainty Journal of Mechanical Design 128 2006 991 1000 (Pubitemid 44123188)
-
(2006)
Journal of Mechanical Design, Transactions of the ASME
, vol.128
, Issue.4
, pp. 991-1000
-
-
Liu, H.1
Chen, W.2
Kokkolaras, M.3
Papalambros, P.Y.4
Kim, H.M.5
-
193
-
-
33144477524
-
An inductive design exploration method for the integrated design of multi-scale materials and products
-
Long Beach, CA Paper Number DETC2005-85335
-
Choi H-J, Allen JK, Rosen D, McDowell DL, Mistree F. An inductive design exploration method for the integrated design of multi-scale materials and products, in: Design engineering technical conferences - design automation conference, Long Beach, CA, 2005, Paper Number DETC2005-85335.
-
(2005)
Design Engineering Technical Conferences - Design Automation Conference
-
-
Choi, H.-J.1
Allen, J.K.2
Rosen, D.3
McDowell, D.L.4
Mistree, F.5
-
194
-
-
33751350855
-
-
Ph.D. Dissertation, The GW Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA
-
Choi H-J. A robust design method for model and propagated uncertainty, Ph.D. Dissertation, The GW Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, 2005.
-
(2005)
A Robust Design Method for Model and Propagated Uncertainty
-
-
Choi, H.-J.1
-
195
-
-
41549090046
-
An inductive design exploration method for hierarchical systems design under uncertainty
-
DOI 10.1080/03052150701742201, PII 790458391
-
H.-J. Choi, D.L. McDowell, J.K. Allen, and F. Mistree An inductive design exploration method for hierarchical systems design under uncertainty Engineering Optimization 40 2008 287 307 (Pubitemid 351462590)
-
(2008)
Engineering Optimization
, vol.40
, Issue.4
, pp. 287-307
-
-
Choi, H.-J.1
McDowell, D.L.2
Allen, J.K.3
Mistree, F.4
-
196
-
-
84863583158
-
Managing uncertainty in multiscale systems via simulation model refinement
-
August 28-31, Washington, DC Paper Number: DETC2011/47655
-
Sinha A, Panchal JH, Allen JK, Mistree F. Managing uncertainty in multiscale systems via simulation model refinement, in: ASME 2011 international design engineering technical conferences and computers and information in engineering conference, August 28-31, Washington, DC, 2011. Paper Number: DETC2011/47655.
-
(2011)
ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference
-
-
Sinha, A.1
Panchal, J.H.2
Allen, J.K.3
Mistree, F.4
-
197
-
-
38949204849
-
A value-of-information based approach to simulation model refinement
-
DOI 10.1080/03052150701690764, PII 790459557
-
J.H. Panchal, C.J.J. Paredis, J.K. Allen, and F. Mistree A value-of-information based approach to simulation model refinement Engineering Optimization 40 2008 223 251 (Pubitemid 351230573)
-
(2008)
Engineering Optimization
, vol.40
, Issue.3
, pp. 223-251
-
-
Panchal, J.H.1
Paredis, C.J.J.2
Allen, J.K.3
Mistree, F.4
-
198
-
-
78650330417
-
Model selection under limited information using a value-of-information- based indicator
-
(1-13)
-
M. Messer, J.H. Panchal, V. Krishnamurthy, B. Klein, P.D. Yoder, and J.K. Allen Model selection under limited information using a value-of-information- based indicator Journal of Mechancial Design 132 2010 121008(1-13)
-
(2010)
Journal of Mechancial Design
, vol.132
, pp. 121008
-
-
Messer, M.1
Panchal, J.H.2
Krishnamurthy, V.3
Klein, B.4
Yoder, P.D.5
Allen, J.K.6
-
199
-
-
43249083782
-
A systems based approach for integrated design of materials, products, and design process chains
-
J.H. Panchal, H.-J. Choi, J.K. Allen, D.L. McDowell, and F. Mistree A systems based approach for integrated design of materials, products, and design process chains Journal of Computer-Aided Materials Design 14 2007 265 293
-
(2007)
Journal of Computer-Aided Materials Design
, vol.14
, pp. 265-293
-
-
Panchal, J.H.1
Choi, H.-J.2
Allen, J.K.3
McDowell, D.L.4
Mistree, F.5
-
202
-
-
44849129044
-
Simulation model refinement for decision making via a value-of-information based metric
-
Philadelphia, PA Paper Number: DETC2006-99433
-
Panchal JH, Allen JK, Paredis CJJ, Mistree F. Simulation model refinement for decision making via a value-of-information based metric, in: Design automation conference, Philadelphia, PA, 2006. Paper Number: DETC2006-99433.
-
(2006)
Design Automation Conference
-
-
Panchal, J.H.1
Allen, J.K.2
Cjj, P.3
Mistree, F.4
-
203
-
-
79958806234
-
Model refinement decisions using the process performance indicator
-
M. Messer, J.H. Panchal, J.K. Allen, and F. Mistree Model refinement decisions using the process performance indicator Engineering Optimization 43 7 2011 741 762
-
(2011)
Engineering Optimization
, vol.43
, Issue.7
, pp. 741-762
-
-
Messer, M.1
Panchal, J.H.2
Allen, J.K.3
Mistree, F.4
-
204
-
-
36849071820
-
-
Ph.D. Dissertation, Industrial and Systems Engineering, University of Southern California, Los Angeles
-
Valerdi R. The constructive systems engineering cost model (Cosysmo), Ph.D. Dissertation, Industrial and Systems Engineering, University of Southern California, Los Angeles, 2005.
-
(2005)
The Constructive Systems Engineering Cost Model (Cosysmo)
-
-
Valerdi, R.1
-
205
-
-
0003471985
-
-
Sandia National Laboratories Report Number: SAND2000-0824
-
Oberkampf WL, DeLand SM, Rutherford BM, Diegert KV, Alvin KF. Estimation of total uncertainty in modeling and simulation, Sandia National Laboratories, 2000, Report Number: SAND2000-0824.
-
(2000)
Estimation of Total Uncertainty in Modeling and Simulation
-
-
Oberkampf, W.L.1
Deland, S.M.2
Rutherford, B.M.3
Diegert, K.V.4
Alvin, K.F.5
-
206
-
-
1642479022
-
Verification and validation of simulation models
-
New Orleans, LA
-
Sargent R. Verification and validation of simulation models, in: Winter simulation conferences, New Orleans, LA, 2003, 37-48.
-
(2003)
Winter Simulation Conferences
, pp. 37-48
-
-
Sargent, R.1
-
207
-
-
34249069162
-
A framework for validation of computer models
-
DOI 10.1198/004017007000000092
-
M.J. Bayarri, J.O. Berger, R. Paulo, J. Sacks, J.A. Cafeo, and J. Cavendish A framework for validation of computer models Technometrics 49 2007 138 154 (Pubitemid 46799915)
-
(2007)
Technometrics
, vol.49
, Issue.2
, pp. 138-154
-
-
Bayarri, M.J.1
Paulo, R.2
Berger, J.O.3
Sacks, J.4
Cafeo, J.A.5
Cavendish, J.6
Lin, C.-H.7
Tu, J.8
-
210
-
-
34548669416
-
Validating behavioral models for reuse
-
DOI 10.1007/s00163-007-0031-0
-
R.J. Malak, and C.J.J. Paredis Validating behavioral models for reuse Research in Engineering Design 18 2007 111 128 (Pubitemid 47415763)
-
(2007)
Research in Engineering Design
, vol.18
, Issue.3
, pp. 111-128
-
-
Malak Jr., R.J.1
Paredis, C.J.J.2
-
211
-
-
16244391759
-
Towards reusable knowledge-based idealizations for rapid design and analysis
-
Palm Springs, CA Paper Number: AIAA-2004-2009
-
Mocko GM, Panchal JH, Fernández MG, Peak R, Mistree F. Towards reusable knowledge-based idealizations for rapid design and analysis, in: 45th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics & materials conference, Palm Springs, CA, 2004. Paper Number: AIAA-2004-2009.
-
(2004)
45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference
-
-
Mocko, G.M.1
Panchal, J.H.2
Fernández, M.G.3
Peak, R.4
Mistree, F.5
-
212
-
-
78649996228
-
Using support vector machines to formalize the valid input domain in predictive models in systems design problems
-
(1-14)
-
R.J. Malak, and C.J.J. Paredis Using support vector machines to formalize the valid input domain in predictive models in systems design problems Journal of Mechancial Design 132 2010 101001(1-14)
-
(2010)
Journal of Mechancial Design
, vol.132
, pp. 101001
-
-
Malak, R.J.1
Paredis, C.J.J.2
-
213
-
-
69949175411
-
The 'validation square' - Validating design methods
-
New York Paper Number: ASME DETC2000/DTM-14579
-
Pedersen K, Emblemsvag J, Bailey R, Allen J, Mistree F. The 'validation square' - validating design methods, in: ASME design theory and methodology conference, New York, 2000. Paper Number: ASME DETC2000/DTM-14579.
-
(2000)
ASME Design Theory and Methodology Conference
-
-
Pedersen, K.1
Emblemsvag, J.2
Bailey, R.3
Allen, J.4
Mistree, F.5
-
214
-
-
84859079645
-
The validation square: How does one verify and validate a design method?
-
W. Chen, K. Lewis, L. Schmidt, ASME Press New York, NY
-
C.C. Seepersad, K. Pedersen, J. Emblemsvag, R.R. Bailey, J.K. Allen, and F. Mistree The validation square: how does one verify and validate a design method? W. Chen, K. Lewis, L. Schmidt, Decision-based design: making effective decisions in product and systems design 2005 ASME Press New York, NY
-
(2005)
Decision-based Design: Making Effective Decisions in Product and Systems Design
-
-
Seepersad, C.C.1
Pedersen, K.2
Emblemsvag, J.3
Bailey, R.R.4
Allen, J.K.5
Mistree, F.6
-
215
-
-
80055023025
-
Validating designs through sequential simulation-based optimization
-
Montreal, Quebec Paper Number: DETC2010-28431
-
Li J, Mourelatos ZP, Kokkolaras M, Papalambros PY. Validating designs through sequential simulation-based optimization, in: ASME 2010 design engineering technical conferences & computers in engineering conference, Montreal, Quebec, 2010. Paper Number: DETC2010-28431.
-
(2010)
ASME 2010 Design Engineering Technical Conferences & Computers in Engineering Conference
-
-
Li, J.1
Mourelatos, Z.P.2
Kokkolaras, M.3
Papalambros, P.Y.4
-
216
-
-
84892939318
-
Critical path issues in ICME, models, databases, and simulation tools needed for the realization of integrated computational materials engineering
-
S.M. Arnold, T.T. Wong, ASM International Houston, Tx
-
D.L. McDowell Critical path issues in ICME, models, databases, and simulation tools needed for the realization of integrated computational materials engineering S.M. Arnold, T.T. Wong, Proc. symposium held at materials science and technology 2010 2011 ASM International Houston, Tx 31 37
-
(2011)
Proc. Symposium Held at Materials Science and Technology 2010
, pp. 31-37
-
-
McDowell, D.L.1
|