Microstructure-sensitive computational modeling of fatigue crack formation

International Journal of Fatigue

Volumn 32, Issue 9, 2010, Pages 1521-1542

  McDowell, D L ^a   Dunne, F P E ^b  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b UNIVERSITY OF OXFORD   (United Kingdom)

Author keywords

Crystal plasticity; Fatigue crack formation; Fatigue crack initiation; High cycle fatigue; Microstructure; Simulation

Indexed keywords

CRYSTAL PLASTICITY; FATIGUE CRACK INITIATION; FATIGUE CRACKS; HIGH CYCLE FATIGUE; MICROSTRUCTURE SIMULATIONS;

CHARACTERIZATION; COMPUTATIONAL MECHANICS; CRACK INITIATION; CRYSTAL MICROSTRUCTURE; FAILURE ANALYSIS; FATIGUE CRACK PROPAGATION; FATIGUE OF MATERIALS; NUCLEATION; PLASTICITY; STRESS CORROSION CRACKING; STRUCTURAL HEALTH MONITORING; SUPERALLOYS; TITANIUM ALLOYS;

CRACKS;

EID: 77955231690     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2010.01.003     Document Type: Article

References (206)

1. D.L. McDowell Viscoplasticity of heterogeneous metallic materials Mater Sci Eng R Rep 62 3 2008 67 123
2. B.T. Ma, and C. Laird Overview of fatigue behavior in copper single-crystals 2. Population, size distribution and growth kinetics of stage-I cracks for tests at constant strain amplitude Acta Metall 37 2 1989 337 348
3. P.L. Lukas, and Kunz Stress-strain response and fatigue life of copper single crystals cyclically loaded with a positive mean stress Mater Sci Eng A 272 1 1999 31 37
4. H. Mughrabi Cyclic hardening and saturation behavior of copper single-crystals Mater Sci Eng 33 2 1978 207 223
5. J. Polák On the role of point-defects in fatigue crack initiation Mater Sci Eng 92 1987 71 80
6. J. Polák, J. Man, and K. Obrtlik AFM evidence of surface relief formation and models of fatigue crack nucleation Int J Fatigue 25 2003 1027 1036
7. J. Polák Mechanisms and kinetics of the early fatigue damage in crystalline materials Mater Sci Eng A 468-470 n SPEC. ISS 2007 33 39
8. A. Weidner, J. Man, W. Tirschler, P. Klapetek, C. Blochwitz, and J. Polák Half-cycle slip activity of persistent slip bands at different stages of fatigue life of polycrystalline nickel Mater Sci Eng A 492 1-2 2008 118 127
9. H. Biermann, T. Ungár, T. Pfannenmüller, G. Hoffmann, A. Borbély, and H. Mughrabi Local variations of lattice parameter and long-range internal stresses during cyclic deformation of polycrystalline copper Acta Metall Mater 41 9 1993 2743 2753
10. H. Mughrabi Cyclic slip irreversibilities and the evolution of fatigue damage Metall Mater Trans B 40 4 2009 431 453
11. M. Petrenec, J. Polák, K. Obrtlík, and J. Man Dislocation structures in cyclically strained X10CrAl24 ferritic steel Acta Mater 54 13 2006 3429 3443
12. M.V. Glazov, and C. Laird Size effects of dislocation patterning in fatigued metals Acta Metall Mater 43 7 1995 2849 2857
13. E.A. Repetto, and M. Ortiz A micromechanical model of cyclic deformation and fatigue crack nucleation in F.C.C. single crystals Acta Mater 45 6 1997 2577 2595
14. M. Bayerlein, and H. Mughrabi The formation of wither tongue- or ribbon-like extrusions in fatigued copper polycrystals Acta Metall Mater 39 7 1991 1645 1650
15. J. Polák, and M. Sauzay Growth of extrusions in localized cyclic plastic straining Mater Sci Eng A 500 1-2 2009 122 129
16. J.C. Figueroa, and C. Laird Crack initiation mechanisms in copper polycrystals cycled under constant strain amplitudes and in step tests Mater Sci Eng 60 1 1983 45 58 (Pubitemid 13608724)
17. Christ H-J. Cyclic stress-strain response and microstructure. ASM handbook, vol. 19 on fatigue and fracture. ASM International; 1996. p. 73-95.
18. U. Essmann Irreversibility of cyclic slip in persistent slip bands of fatigued pure FCC metals Philos Mag A 45 1 1982 171 190
19. Gross TS. Micromechanisms of monotonic and cyclic crack growth. ASM handbook, vol. 19 on fatigue and fracture. ASM International; 1996. p. 42-60.
20. Lukas P. Fatigue crack nucleation and microstructure. ASM handbook, vol. 19 on fatigue and fracture. ASM International; 1996. p. 96-109.
21. Fine ME, Chung Y-W. Fatigue failure in metals. ASM handbook, vol. 19 on fatigue and fracture. ASM International; 1996. p. 63-71.
22. A. Shyam, and W.W. Milligan A model for slip irreversibility, and its effect on the fatigue crack propagation threshold in a nickel-base superalloy Acta Mater 53 2005 835 844
23. L. Cretegny, and A. Saxena AFM characterization of the evolution of surface deformation during fatigue in polycrystalline copper Acta Mater 49 18 2001 3755 3765
24. R.J. Asaro Micromechanics of crystals and polycrystals Adv Appl Mech 23 1983 1 115
25. D. Peirce, R.J. Asaro, and A. Needleman Material rate dependence and localized deformation in crystalline solids Acta Metall 31 12 1983 1951 1976
26. R.J. Asaro, and A. Needleman Flow localization in strain hardening crystalline solids Scripta Metall 18 5 1984 429 435
27. H.E. Deve, and R.J. Asaro Development of plastic failure modes in crystalline materials: shear bands in FCC polycrystals Metall Trans A, Phys Metall Mater Sci 20 4 1989 579 593
28. P.E. McHugh, A.G. Varias, R.J. Asaro, and C.F. Shih Computational modeling of microstructures Future Gen Comput Syst 5 2-3 1989 295 318
29. T.L. Sham, and A. Needleman Effects of triaxial stressing on creep cavitation of grain boundaries Acta Metall 31 6 1983 919 926
30. T. Christman, A. Needleman, S. Nutt, and S. Suresh On microstructural evolution and micromechanical modelling of deformation of a whisker-reinforced metal-matrix composite Mater Sci Eng A: Struct Mater: Prop Microstruct Process 107 1-2 1989 49 61
31. A. Needleman Size effects in the analysis of ductility under dynamic loading conditions Am Soc Mech Eng Appl Mech Div AMD 180 1993 55 58
32. G.L. Povirk, S.R. Nutt, and A. Needleman Analysis of creep in thermally cycled Al/SiC composites Scripta Metall Mater 26 3 1992 461 466
33. A. Needleman Micromechanical modelling of interfacial decohesion Ultramicroscopy 40 3 1993 203 214
34. M.A. Zikry Failure modes in cubic crystalline materials Am Soc Mech Eng Aerospace Div (Publication) AD 36 1993 199 210
35. M.A. Zikry, and M. Kao Large-scale crystal plasticity computations of microstructural failure modes Comput Syst Eng Int J 6 3 1995 225
36. M.A. Zikry, and M. Kao Inelastic microstructural failure mechanisms in crystalline materials with high angle grain boundaries J Mech Phys Solids 44 11 1996 1765 1798
37. M.A. Zikry, and T. Kameda Inelastic three dimensional high strain-rate dislocation density based analysis of grain-boundary effects and failure modes in ordered intermetallics Mech Mater 28 1/4 1998 93 102
38. Y.M. Haddad Microstructural approach to the mechanical response of a class of polycrystalline systems. I. Theoretical analysis Res Mech 29 2 1990 177 196
39. P.B. Thanedar, and C.C. Chamis Composite laminate tailoring with probabilistic constraints and loads Am Soc Mech Eng Petrol Div (Publication) PD 32 1990 11 21
40. G.T. Mase, P.L.N. Murthy, and C.C. Chamis Probabilistic micromechanics and macromechanics of polymer matrix composites NASA Tech Memo 103669 1991 19
41. C.C. Chamis Probabilistic composite design ASTM Special Techn Publ 1242 1997 23 42
42. J.M. Duva, J. Aboudi, and C.T. Herakovich Probabilistic micromechanics model for damaged composites J Eng Mater Technol, Trans ASME 118 4 1996 548 553
43. C. Ruggieri, and R.H. Dodds Numerical evaluation of probabilistic fracture parameters using WSTRESS Eng Comput 15 1 1998 49 73
44. D. Krajcinovic Damage mechanics 1996 Elsevier Amsterdam
45. Ostoja-Starzewski M, Al-Ostaz A, Jasiuk I, Alzebdeh K. Micromechanics of damage in random composites. Probabilistic mechanics and structural and geotechnical reliability. In: Proceedings of the specialty conference; 1996. p. 362-3.
46. Zhai J, Zhou M. Numerical simulation of dynamic crack growth in ceramic composites. In: Proceedings of the 12th ASCE engineering mechanics conference; 1998. p. 1255-8.
47. Zhou M, Zhai J. Modeling of micromechanical fracture using a cohesive finite element method. In: Furnish MD, Chhabildas LC, Hixon RS, editors. CP505, shock compression of condensed matter; 1999. p. 623-8.
48. J.W. Provan Model for fatigue crack initiation in polycrystalline solids. Advances in research on the strength and fracture of materials 4th Int conference on fracture, June 19-24, 1977 1977 Pergamon Press Waterloo (ON)
49. J.W. Provan Fatigue reliability distribution based on probabilistic micromechanics Martinus Nijhoff Publ 1982 63 69
50. T. Sakai, K. Tokaji, and T. Ogawa Probabilistic model and computer simulation on small fatigue cracks for metallic materials Nippon Kikai Gakkai Ronbunshu, Trans Jpn Soc Mech Eng A 57 539 1991 1514 1521
51. Tanaka K, Akiniwa Y. Propagation and non-propagation of small fatigue cracks. In: Advances in fracture research, proceedings ICF7, vol. 2. Houston, TX, March 20-24, 1989. p. 869-87.
52. D.L. McDowell Basic issues in the mechanics of high cycle metal fatigue Int J Fract 80 1996 103 145
53. K. Gall, H. Sehitoglu, and Y. Kadioglu Methodology for predicting variability in microstructurally short fatigue crack growth rates J Eng Mater Technol, Trans ASME 119 2 1997 171 178
54. T. Hoshide, and D.F. Socie Crack nucleation and growth modeling in biaxial fatigue Eng Fract Mech 29 3 1988 287 299 (Pubitemid 18575879)
55. McDowell DL. Damage mechanics in metal fatigue: a discriminating perspective. Int J Damage Mech 1999;8:377-403 [special issue by McDowell DL, guest editor].
56. T.E. Lacy, R. Talreja, and D.L. McDowell Effects of damage distribution on evolution ASTM Spec Tech Publ 1315 1997 131 149
57. T. Kanit, S. Forest, L. Galliet, V. Mounoury, and D. Jeulin Determination of the size of the representative volume element for random composites: statistical and numerical approach Int J Solids Struct 40 13-14 2003 3647 3679
58. Bennett VP. A microscale study of small crack propagation in multiaxial fatigue. PhD thesis. Georgia Tech; 1999.
59. V.P. Bennett, and D.L. McDowell Polycrystal orientation effects on microslip and mixed mode behavior of microstructurally small cracks K.J. Miller, D.L. McDowell, Mixed-mode crack behavior 1999 ASTM STP 1359 203 228
60. V.P. Bennett, and D.L. McDowell Polycrystal orientation distribution effects on microslip in high cycle fatigue Int J Fatigue 25 2003 27 39
61. V.P. Bennett, and D.L. McDowell Crack tip displacements of microstructurally small surface cracks in single phase ductile polycrystals Eng Fract Mech 70 2003 185 207
62. K. Gall, M. Horstemeyer, D.L. McDowell, and J. Fan Finite element analysis of the stress distributions near damaged Si particle clusters in cast Al-Si alloys Mech Mater 32 5 2000 277 301
63. K. Gall, M.F. Horstemeyer, B.W. Degner, D.L. McDowell, and J. Fan On the driving force for fatigue crack formation from inclusions and voids in a cast A356 aluminum alloy Int J Fract 108 2001 207 233
64. J. Fan, D.L. McDowell, M.F. Horstemeyer, and K. Gall Computational micromechanics analysis of cyclic crack-tip behavior for microstructurally small cracks in dual-phase Al-Si alloys Eng Fract Mech 68 2001 1687 1706
65. D.L. McDowell, K. Gall, M.F. Horstemeyer, and J. Fan Microstructure-based fatigue modeling of cast A356-T6 alloy Eng Fract Mech 70 2003 49 80
66. R.G. Tryon, and T.A. Cruse Reliability-based mesomechanical crack nucleation model. Collection of technical papers - AIAA/ASME/ASCE/AHS/ASC structures Struct Dynam Mater Conf 4 1996 2159 2166
67. R.G. Tryon, and T.A. Cruse Probabilistic mesomechanics for high cycle fatigue life prediction ASME J Eng Mater Technol 119 1 1997 65 70
68. R.G. Tryon, and T.A. Cruse Probabilistic mesomechanics for high cycle fatigue life prediction ASME Aerospace Div Publ AD 55 1997 467 474
69. D. Rugg, M. Dixon, and F.P.E. Dunne Effective structural unit size in titanium alloys J Strain Anal 42 4 2007 269 279
70. F.P.E. Dunne, D. Rugg, and A. Walker A systematic study of hcp crystal orientation and morphology effects in polycrystal deformation and fatigue Proc R Soc London 463 2082 2007 1467 1489
71. F.P.E. Dunne, and D. Rugg On the mechanisms of fatigue facet nucleation in titanium alloys Fatigue Fract Eng Mater Struct 31 2008 949 958
72. F.P.E. Dunne, A. Walker, and D. Rugg Lengthscale-dependent, elastically anisotropic, physically-based HCP crystal plasticity: application to cold-dwell fatigue in Ti alloys Int J Plast 23 2007 1061 1083
73. G. Saheli, H. Garmestani, and A. Gokhale Homogenization relations for elastic properties of two-phase composites using two-point statistical functions J Mech Phys Solids 3 1 2008 85 106
74. D.S. Li, H. Garmestani, and S. Ahzi Processing path optimization to achieve desired texture in polycrystalline materials Acta Mater 55 2 2007 647 654
75. Apelian D. Accelerating technology transition, ch. National Research Council Report. Washington (DC): National Academies Press; 2004.
76. Jou H-J, Voorhees P, Olson GB. Computer simulations for the prediction of microstructure/property variation in aeroturbine disks. In: Green KA, Pollock TM, Harada H, Howson TE, Reed RC, Schirra JJ, Walston S, editors. Superalloys; 2004. p. 877-86.
77. Pollock TM, Allison J. Integrated computational materials engineering: a transformational discipline for improved competitiveness and national security. The National Academies Press; 2008. < http://www.nap.edu/catalog.php?record- id=12199. (accessed on 2/1/10)
78. D.L. McDowell, and G.B. Olson Concurrent design of hierarchical materials and structures Sci Model Simul (CMNS) 15 1 2008 207
79. V. Hasija, S. Ghosh, M.J. Mills, and D.S. Joseph Deformation and creep modelling in polycrystalline Ti-6Al Acta Mater 51 2003 4533 4549
80. M. Sauzay, and M. Jourdan Polycrystalline microstructure, cubic elasticity, and nucleation of high-cycle fatigue cracks Int J Fract 141 3-4 2006 431 446
81. S. Sinha, and S. Ghosh Modeling cyclic ratcheting based fatigue life of HSLA steels using crystal plasticity FEM simulations and experiments Int J Fract 28 12 2006 1690 1704
82. G. Venkataramani, D. Deka, S. Ghosh, and J.B. Nordholt Crystal plasticity based Fe model for understanding microstructural effects on creep and dwell fatigue in Ti-6242 J Eng Mater Technol, Trans ASME 128 3 2006 356 365
83. K. Kirane, and S. Ghosh A cold dwell fatigue crack nucleation criterion for polycrystalline Ti-6242 using grain-level crystal plasticity FE model Int J Fatigue 30 12 2008 2127 2139
84. S. Manchiraju, K. Kirane, and S. Ghosh Dual-time scale crystal plasticity FE model for cyclic deformation of Ti alloys J Comput - Aided Mater Des 14 1 2007 47 61
85. K.-S. Cheong, M. Smillie, and D.M. Knowles Predicting fatigue crack initiation through image-based micromechanical modeling Acta Mater 55 5 2007 1757 1768
86. J.E. Bozek, J.D. Hochhalter, M.G. Veilleux, M. Liu, G. Heber, and S.D. Sintay A geometric approach to modeling microstructurally small fatigue crack formation: I. Probabilistic simulation of constituent particle cracking in AA 7075-T651 Model Simul Mater Sci Eng 16 6 2008 10.1088/0965-0393/16/6/06500
87. J.M. Emery, J.D. Hochhalter, P.A. Wawrzynek, G. Heber, and A.R. Ingraffea DDSim: a hierarchical, probabilistic, multiscale damage and durability simulation system - Part I: methodology and level I Eng Fract Mech 76 10 2009 1500 1530
88. Knobbe H, Köster P, Krupp U, Christ H-J, Fritzen C-P, Cherif MA, et al. Crack initiation and propagation in a stainless duplex steel during HCF and VHCF loading. In: VHCF-4 - 4th international conference on very high cycle fatigue; 2007. p. 143-9.
89. S.R. Johnston, G.P. Potirniche, S.R. Daniewicz, and M.F. Horstemeyer Three-dimensional finite element simulations of microstructurally small fatigue crack growth in 7075 aluminium alloy Fatigue Fract Eng Mater Struct 29 8 2006 597 605
90. A. Brückner-Foit, and X. Huang Numerical simulation of micro-crack initiation of martensitic steel under fatigue loading Int J Fatigue 28 9 2006 963 971
91. Brahme A, Saylor D, Campman R, Lee S, Fridy J, Rollett AD. 3D digital microstructures for prognosis modeling. In: Materials damage prognosis - proceedings of a symposium of the materials science and technology 2004 conference; 2005. p. 81-5.
92. H. Vehoff, A. Nykyforchyn, and R. Metz Fatigue crack nucleation at interfaces Mater Sci Eng A 387-389 1-2 2004 546 551
93. M.S. Bruzzi, and P.E. McHugh Micromechanical investigation of the fatigue crack growth behaviour of Al-SiC MMCs Int J Fatigue 26 8 2004 795 804
94. G.P. Potirniche, S.R. Daniewicz, and J.C. Newman Jr. Simulating small crack growth behaviour using crystal plasticity theory and finite element analysis Fatigue Fract Eng Mater Struct 27 1 2004 59 71
95. G.P. Potirniche, and S.R. Daniewicz Finite element modeling of microstructurally small cracks using single crystal plasticity Int J Fatigue 25 9-11 2003 877 884
96. E. Ferrie, and M. Sauzay Influence of local crystallographic orientation on short crack propagation in high cycle fatigue of 316LN steel J Nucl Mater 386-388 C 2009 666 669
97. G. Bertolino, V. Doquet, and M. Sauzay Modelling of the scatter in short fatigue cracks growth kinetics in relation with the polycrystalline microstructure Int J Fatigue 27 5 2005 471 480
98. C.H. Wang, and J.W. Hutchinson Interactions of fatigue cracks with elastic obstacles Int J Fract 109 3 2001 263 283
99. S. Meyer, E. Diegele, A. Brückner-Foit, and A. Möslang Crack interaction modeling Fatigue Fract Eng Mater Struct 23 4 2000 315 323
100. S.R. Daniewicz, and G.P. Potirniche Modeling of fatigue crack growth threshold development for a microstructurally small crack Eng Fract Mech 72 9 2005 1438 1453
101. F.O. Riemelmoser, P. Gumbsch, and R. Pippan Dislocation modelling of fatigue cracks: an overview Mater Trans 42 1 2001 2 13
102. R. Pippan, F.O. Riemelmoser, and H. Kreuzer Effect of the discrete nature of plasticity on fatigue crack propagation J Phys IV: JP 11 5 2001 Pr577 Pr584
103. F.O. Riemelmoser, and R. Pippan On the ΔKeff concept: an investigation by means of a discrete dislocation model ASTM Spec Tech Publ 1343 1999 1 13
104. V.S. Deshpande, A. Needleman, and E. Van der Giessen Scaling of discrete dislocation predictions for near-threshold fatigue crack growth Acta Mater 51 15 2003 4637 4651
105. V.S. Deshpande, A. Needleman, and E. Van der Giessen Discrete dislocation plasticity modeling of short cracks in single crystals Acta Mater 51 1 2003 1 15
106. S. Groh, S. Olarnrithinun, W.A. Curtin, A. Needleman, A. Deshpande, and E. Van Der Giessen Fatigue crack growth from a cracked elastic particle into a ductile matrix Philos Mag 88 30-32 2008 3565 3583
107. D.L. McDowell Microstructure-sensitive computational fatigue analysis Sidney Yip, M.F. Horstemeyer, Handbook of materials modeling, Part A: methods 2005 Springer The Netherlands 1193 1214
108. D.L. McDowell Simulation-based strategies for microstructure-sensitive fatigue modeling Mater Sci Eng A 468-470 2007 4 14
109. Ishihara S, McEvily AJ. On the early initiation of fatigue cracks in the high cycle regime. In: Proceedings ICF 12, Ottawa (ON, Canada), July 12-17, 2009.
110. Forsyth PJE. A two-stage process of fatigue crack growth. In: Proceeding, symposium on crack propagation, Cranfield; 1971. p. 76-94.
111. Marx M, Schaf W, Vehoff H. Influence of microstructural barriers on short fatigue crack growth. In: Proceedings ICF 12, Ottawa, Ontario, Canada, July 12-17, 2009.
112. D.F. Socie Critical plane approaches for multiaxial fatigue damage assessment D.L. McDowell, R. Ellis, Advances in multiaxial fatigue 1993 ASTM STP 1191 Philadelphia 7 36
113. H.S. Lamba The J-integral applied to cyclic loading Eng Fract Mech 7 1975 693
114. K. Tanaka The cyclic J-integral as a criterion for fatigue crack growth Int J Fract 22 1983 91 104
115. K. Tanaka Short-crack fracture mechanics in fatigue conditions T. Tanaka, M. Jono, K. Komai, Current research on fatigue cracks Curr Jpn Mater Res vol. 1 1987 Elsevier 93 117
116. K.J. Miller Materials science perspective of metal fatigue resistance Mater Sci Tech 9 1993 453 462
117. K.J. Miller The two thresholds of fatigue behaviour Fatigue Fract Eng Mater Struct 16 9 1993 931 939
118. J.M. Ambrico, and M.R. Begley Plasticity in fretting contact J Mech Phys Solids 48 11 2000 2391 2417
119. G. Venkataraman, Y.W. Chung, and T. Mura Application of minimum energy formalism in a multiple slip band model for fatigue - II. Crack nucleation and derivation of a generalized Coffin-Manson law Acta Metall Mater 39 1991 2631 2638
120. K. Tanaka, and T. Mura A dislocation model for fatigue crack initiation ASME J Appl Mech 48 1981 97 103 (Pubitemid 11497152)
121. S. Suresh Fatigue of materials 2nd ed. 1998 Cambridge University Press Cambridge, UK
122. C.-H. Goh, J.M. Wallace, R.W. Neu, and D.L. McDowell Polycrystal plasticity simulations of fretting fatigue Int J Fatigue 23 2001 S423 S435
123. C.-H. Goh, R.W. Neu, and D.L. McDowell Influence of nonhomogeneous material in fretting fatigue. ASTM STP 1425 Fretting Fatigue Adv Basic Understanding Appl 2002 183 205
124. M. Shenoy, J. Zhang, and D.L. McDowell Estimating fatigue sensitivity to polycrystalline Ni-Base superalloy microstructures using a computational approach Fatigue Fract Eng Mater Struct 30 10 2007 889 904
125. F.P.E. Dunne, A. Wilkinson, and R. Allen Experimental and computational studies of low cycle fatigue crack nucleation in a polycrystal Int J Plasticity 23 2 2007 273 295
126. A. Manonukul, and F.P.E. Dunne High and low cycle fatigue crack initiation using polycrystal plasticity Proc R Soc London 460 2047 2004 1881 1903
127. A.M. Korsunsky, D. Dini, F.P.E. Dunne, and M.J. Walsh Comparative assessment of dissipated energy and other fatigue criteria Int J Fatigue 29 9-11 2007 1990 1995
128. R.P. Skelton, T. Vilhelmsen, and G.A. Webster Energy criteria and cumulative damage during fatigue crack growth Int J Fatigue 9 1998 641 649
129. A.J. Wilkinson, M.B. Henderson, and J.W. Martin Examination of fatigue crack plastic zones using scanning electron microscope based electron diffraction techniques Phil Mag Lett 74 1996 145
130. J. Ahmed, and A.J. Wilkinson ECCI characterisation of dislocation structures associated with extrusion/intrusion systems and fatigue cracks in copper single crystals Phil Mag A81 2001 1473 1488
131. K.-S. Cheong, and E. Busso Effects of lattice misorientations on strain heterogeneities in FCC polycrystals J Mech Phys Solids 54 4 2006 671 689
132. R.J. Morrissey, C.-H. Goh, and D.L. McDowell Microstructure-scale modelling of HCF deformation Mech Mater 35 2003 295 311
133. A. Fatemi, and D.F. Socie Critical plane approach to multiaxial fatigue damage including out-of-phase loading Fatigue Fract Eng Mater Struct 11 3 1988 149 165
134. A. Fatemi, and P. Kurath Multiaxial fatigue life predictions under the influence of mean-stresses ASME J Eng Mater Technol 110 1988 380 388
135. McDowell DL. Microstructure-sensitive modeling and simulation of fatigue. In: ASM handbook on modeling and simulation: processing of metallic materials, vol. 22, in press.
136. K.O. Findley, and A. Saxena Low cycle fatigue in Rene 88DT at 650 °C: crack nucleation mechanisms and modeling Metall Mater Trans 37A 5 2006 1469 1475
137. D.L. McDowell, and J.-Y. Berard A ΔJ-based approach to biaxial fatigue Fatigue Fract Eng Mater Struct 15 1992 719 741
138. T. Hoshide, and D.F. Socie Mechanics of mixed mode small fatigue crack growth Eng Fract Mech 26 1987 842 850
139. M. Brown, and K.J. Miller A theory for fatigue failure under multiaxial stress-strain conditions Proc Instit Mech Eng 187 65 1973 745 755
140. K. Chan, J. Lankford, and D. Davidson Comparison of crack-tip field parameters for large and small fatigue cracks ASME J Eng Mater Technol 108 1986 206 213 (Pubitemid 16605608)
141. C. Li Vector CTD analysis for crystallographic crack growth Acta Metall Mater 38 11 1990 2129 2134
142. K. Hussain, E.R. De Los Rios, and A. Navarro A two-stage micromechanics model for short fatigue cracks Eng Fract Mech 44 3 1993 425 436
143. C. Li On the interaction among stage I short crack, slip band and grain boundary: a FEM analysis Int J Fract 43 1990 227 239
144. McDowell DL, Bennett VP. Micromechanical aspects of small multiaxial fatigue cracks. In: Proc 5th int conf on biaxial/multiaxial fatigue & fracture, Cracow, Poland; 1997. p. 325-48.
145. R.J. Morrissey, D.L. McDowell, and T. Nicholas Microplasticity in HCF of Ti-6Al-4V Int J Fatigue 23 2001 S55 S64
146. M.M. Shenoy, A.P. Gordon, D.L. McDowell, and R.W. Neu Thermomechanical fatigue behaviour of a directionally solidified Ni-base superalloy J Eng Mater Technol 127 2005 325 336
147. J.P. Dingli, A. Abdul-Latif, and K. Saanouni Predictions of the complex cyclic behaviour of polycrystals using a self-consistent modelling Int J Plasticity 16 2000 411 437
148. M. Ekh, R. Lillbacka, and K. Runesson A model framework for anisotropic damage coupled to crystal (visco)plasticity Int J Plasticity 20 2004 2143 2159
149. T.E. Buchheit, G.W. Wellman, and C.C. Battaile Investigating the limits of polycrystal plasticity modeling Int J Plasticity 21 2005 221 249
150. 12) intermetallics Mater Sci Eng A 400-401 2005 256 259
151. Y.S. Choi, T.A. Parthasarathy, D.M. Dimiduk, and M.D. Uchic Microstructural effects in modeling the flow behavior of single-crystal superalloys Metall Mater Trans A 37 2006 545 550
152. A.N. Stroh The formation of cracks as a result of plastic flow Proc R Soc London 223 1954 404 414
153. W.J. Evans, and M.R. Bache Dwell-sensitive fatigue under biaxial loads in the near-alpha titanium alloy IMI685 Fatigue 16 1994 443 452
154. W.J. Evans Optimising mechanical properties in alpha + beta titanium alloys Mater Sci Eng A 243 1998 89 96
155. R.S. Kumar, A.-J. Wang, and D.L. McDowell Effects of microstructure variability on intrinsic fatigue resistance of nickel-base superalloys - a computational micromechanics approach Int J Fract 137 2006 173 210
156. M. Shenoy, Y. Tjiptowidjojo, and D.L. McDowell Microstructure-sensitive modeling of polycrystalline IN 100 Int J Plasticity 2008 10.1016/j.ijplas.2008. 01.00
157. E. Chen, S. Sauer, M. Meshii, and W.T. Tucker Fatigue microcrack distribution and reliability of a Ni-base superalloy Int J Fatigue 19 1 1997 S75 S82
158. C. Przybyla, R. Prasannavenkatesan, N. Salajegheh, and D.L. McDowell Microstructure-sensitive modeling of high cycle fatigue Int J Fatigue 32 2009 512 525
159. C. Przybyla, and D.L. McDowell Microstructure-sensitive extreme value probabilities for high cycle fatigue of Ni-base superalloy IN100 Int J Plasticity 2009 10.1016/j.ijplas.2009.08.00
160. E.J. Gumbel Statistics of extremes 1958 Columbia University Press New York
161. E. Castillo Extreme value theory in engineering 1988 Academic Boston
162. R. Pyrz Correlation of microstructure variability and local stress-field in two-phase materials Mater Sci Eng A 177 1994 253 259
163. K. Kanazawa, and S. Nishijima Fatigue fracture of low alloy steel at ultra-high-cycle region under elevated temperature condition Zairyo/J Soc Mater Sci Jpn 46 12 1997 1396 1401
164. S. Nishijima, and K. Kanazawa Stepwise S-N curve and fish-eye failure in gigacycle fatigue Fatigue Fract Eng Mater Struct 22 7 1999 601 607
165. G.T. Cashman A statistical methodology for the preparation of a competing modes fatigue design curve J Eng Mater Technol Trans ASME 129 1 2007 159 168
166. S.K. Jha, M.J. Caton, and J.M. Larsen A new paradigm of fatigue variability behavior and implications for life prediction Mater Sci Eng A 468-470 2007 23 32
167. S.K. Jha, and J.M. Larsen Random heterogeneity scales and probabilistic description of the long-lifetime regime of fatigue J.E. Allison, J.W. Jones, J.M. Larsen, R.O. Ritchie, Fourth international conference on very high cycle fatigue (VHCF-4) 2007 The Minerals, Metals & Materials Society (TMS) Ann Arbor (MI, USA) 385 396
168. Wang QY, Bathias C, Kawagoishi N, Chen Q. Characterization of S-N curve in gigacycle fatigue. In: SPIE proceedings series. International conference on experimental mechanics No. 3, Beijing, China, 15-17 October, 2001, vol. L4537; 2002. p. 213-6.
169. Y. Furuya, T. Abe, and S. Matsuoka Inclusion-controlled fatigue properties of 1800 MPa-class spring steels Metall Mater Trans A 35A 12 2004 3737 3744
170. V. Sinha, M.J. Spowart, M.J. Mills, and J.C. Williams Observations on the faceted initiation site in the dwell-fatigue tested Ti-6242 alloy: crystallographic orientation and size effects Metall Mater Trans A 37 2006 1507 1518
171. F. Bridier, D.L. McDowell, P. Villechaise, and J. Mendez Crystal plasticity modeling of slip Activity in Ti-6Al-4V under high cycle fatigue loading Int J Plasticity 25 6 2009 1066 1082
172. Bridier F, Villechaise P, McDowell DL. Crystal plasticity modeling of slip activity in Ti-6Al-4V alloy under high cycle fatigue loading: crystallographic aspects at different scales. In: 1st international conference on material modelling, Dortmund, Germany, September 15-17, 2009.
173. J.R. Mayeur, and D.L. McDowell A three-dimensional crystal plasticity model for duplex Ti-6Al-4V Int J Plasticity 23 9 2007 1457 1485
174. M. Zhang, J. Zhang, and D.L. McDowell Microstructure-based crystal plasticity modeling of cyclic deformation of Ti-6Al-4V Int J Plasticity 23 8 2007 1328 1348
175. M. Zhang, F. Bridier, P. Villechaise, J. Mendez, and D.L. McDowell Simulation of slip band evolution in duplex Ti-6Al-4V Acta Mater 58 2010 1087 1096
176. G. Krauss Deformation and fracture in martensitic carbon steels tempered at low temperatures Metall Mater Trans A 32 4 2001 861 877 (Pubitemid 32474165)
177. G. Krauss Martensite in steel: strength and structure 1999 Elsevier San Carlos de Bariloche. Argentina pp. 40-57
178. Krauss G. Microstructure and performance of carburized steel. Part I: martensite. Adv Mater Process 1995;147(5):40Y-40BB.
179. J.-C. Shin, S. Lee, and J.H. Ryu Correlation of microstructure and fatigue properties of two high-strength spring steels Int J Fatigue 21 6 1999 571 579
180. M.A. Zaccone, J.B. Kelley, and G. Krauss Strain hardening and fatigue of simulated case microstructures of carburized steels Ind Heat 56 9 1989 7
181. A.R. Marder, and G. Krauss Formation of low carbon martensite in Fe-C alloys ASM Trans Q 62 4 1969 957 964
182. A.R. Marder, and G. Krauss Morphology of martensite in iron-carbon alloys Am Soc Met - Trans 60 4 1967 651 660
183. H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamino Crystallographic features of lath martensite in low-carbon steel Acta Mater 54 5 2006 1279 1288
184. S. Morito, H. Saito, T. Ogawa, T. Furuhara, and T. Maki Effect of austenite grain size on the morphology and crystallography of lath martensite in low carbon steels ISIJ Int 45 1 2005 91 94
185. S. Morito, H. Yoshida, T. Maki, and X. Huang Effect of block size on the strength of lath martensite in low carbon steels Mater Sci Eng A 438-440 Special issue 2006 237 240
186. Tiemens BL. Performance optimization and computational design of ultra-high strength gear steels. PhD Thesis. Evanston (IL): Department of Materials Science and Engineering, Northwestern University; 2006.
187. C.J. Kuehmann, and G.B. Olson Gear steels designed by computer Adv Mater Process 153 5 1998 40 43
188. R. Prasannavenkatesan, J. Zhang, D.L. McDowell, G.B. Olson, and H.-J. Jou 3D modeling of subsurface fatigue crack nucleation potency of primary inclusions in heat treated and shot peened martensitic gear steels Int J Fatigue 31 2009 1176 1189
189. J. Zhang, R. Prasannavenkatesan, M.M. Shenoy, and D.L. McDowell Modeling fatigue crack nucleation at primary inclusions in carburized and shot-peened martensitic steel Eng Fract Mech 76 2009 315 334
190. M. Marx, W. Schäf, H. Vehoff, and C. Holzapfel Interaction of microcracks with selected interfaces: focused ion beam for a systematic crack initiation Mater Sci Eng A 435-436 2006 595 601
191. J. Gong, and A. Wilkinson Anisotropy in the plastic flow properties of single crystal alpha titanium determined from micro cantilever beams Acta Mater 2009 10.1016/j.actamat.2009.07.06
192. A.J. Wilkinson, G. Meaden, and D.J. Dingley High resolution mapping of strains and rotations using electron backscatter diffraction Mater Sci Technol 22 11 2006 1271 1278
193. T.R. Bieler, P. Eisenlohr, F. Roters, D. Kumar, D.E. Mason, and M.A. Crimp The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metals Int J Plasticity 25 9 2009 1655 1683
194. A. Ma, F. Roters, and D. Rabbe On the consideration of interactions between dislocations and grain boundaries in crystal plasticity finite element modeling - theory, experiments, and simulations Acta Mater 54 2006 2181 2194
195. M.A. Tschopp, D.E. Spearot, and D.L. McDowell Influence of grain boundary structure on dislocation nucleation in fcc metals J.P. Hirth, Dislocations in solids vol. 14 2008 Elsevier Publ. 43 139
196. P.M. Derlet, P. Gumbsch, R. Hoagland, J. Li, D.L. McDowell, and H. Van Swygenhoven Tomistic simulations of dislocations in confined volumes MRS Bull 34 3 2009 184 189
197. Y. Gao, J.S. Stölken, M. Kumar, and R.O. Ritchie High-cycle fatigue of nickel-base superalloy René 104 (ME3): interaction of microstructurally small cracks with grain boundaries of known character Acta Mater 55 9 2007 3155 3167
198. M. Sauzay, and P. Gilormini Influence of surface effects on fatigue microcracks nucleation Theor Appl Fract Mech 38 2002 53 62
199. C.H. Wang, and K.J. Miller The effects of mean and alternating shear stresses on short fatigue crack growth rates Fatigue Fract Eng Mater Struct 15 12 1992 1223 1236
200. D.L. McDowell An engineering model for propagation of small cracks in fatigue Eng Fract Mech 56 3 1997 357 377
201. K. Chan, and M.P. Enright A probabilistic micromechanical code for predicting fatigue life variability: model development and application J Eng Gas Turb Power 128 4 2006 889 895
202. A. Navarro, and E.R. de los Rios Short and long fatigue crack-growth - a unified model Philos Mag A 57 1 1988 15 36
203. M. Sauzay, H. Brillet, I. Monnet, M. Mottot, F. Barcelo, and B. Fournier Cyclically induced softening due to low-angle boundary annihilation in a martensitic steel Mater Sci Eng A 400-401 2005 241 244 (Pubitemid 40935901)
204. M. Sauzay, B. Fournier, M. Mottot, A. Pineau, and C. Caës Cyclic softening of martensitic steels at high temperature. Experiments and physically based modelling Mater Sci Eng A 483-484 2008 410 414
205. M. Sauzay, and T.H. Jourdan Polycrystalline microstructure, cubic elasticity and nucleation of high-cycle fatigue short cracks Int J Fract 141 2006 431 446
206. S. Osterstock, C.F. Robertson, M. Sauzay, S. Degallaix, and V. Aubin Prediction of the scatter of crack initiation under high-cycle fatigue Key Eng Mater 345-346 2007 363 366 (Pubitemid 46751239)