Microstructure-sensitive modeling of high cycle fatigue

International Journal of Fatigue

Volumn 32, Issue 3, 2010, Pages 512-525

  Przybyla, Craig ^b,c   Prasannavenkatesan, Rajesh ^a   Salajegheh, Nima ^a   McDowell, David L ^a,b  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b Georgia Institute of Technology   (United States)

^c AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

Extreme value statistics; High cycle fatigue; Inclusions; Microstructure sensitive; Small cracks

Indexed keywords

COMPETING MECHANISMS; COMPUTATIONAL SIMULATION; CRACK FORMATION; DIFFERENT MECHANISMS; DRIVING FORCES; EARLY GROWTH; EXTREME VALUE; EXTREME VALUE STATISTICS; FATIGUE RESISTANT; GEAR STEELS; HIGH CYCLE FATIGUE; INDICATOR PARAMETERS; LOADING CONDITION; MICROSTRUCTURE ATTRIBUTES; PRIMARY INCLUSIONS; PROCESS HISTORY; SLIP BEHAVIOR; SMALL CRACK; STRESS AMPLITUDES; STRESS STATE; SUBSURFACE CRACKS; SUPPORT DESIGN; VERY HIGH CYCLE FATIGUE;

CRACK DETECTION; CRACK INITIATION; FATIGUE OF MATERIALS; PHILOSOPHICAL ASPECTS; SHOT PEENING; STRESS ANALYSIS;

MICROSTRUCTURE;

EID: 70449633052     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2009.03.021     Document Type: Article

References (98)

1. McDowell D.L. Basic issues in the mechanics of high cycle metal fatigue. Int J Fract 80 (1996) 103-145
2. Suresh S. Fatigue of materials. 2nd ed. (1998), Cambridge University Press, Cambridge (UK)
3. Venkataraman G., Chung Y.W., and Mura T. Application of minimum energy formalism in a multiple slip band model for fatigue - II. Crack nucleation and derivation of a generalized Coffin-Manson law. Acta Metall Mater 39 100 (1991) 2631-2638
4. Repetto E.A., and Ortiz M. A micromechanical model of cyclic deformation and fatigue crack nucleation in F.C.C. single crystals. Acta Mater 45 6 (1997) 2577-2595
5. McDowell D.L., Gall K., Horstemeyer M.F., and Fan J. Microstructure-based fatigue modeling of cast A356-T6 alloy. Eng Fract Mech 70 (2003) 49-80
6. Bennett V.P., and McDowell D.L. Polycrystal orientation distribution effects on microslip in high cycle fatigue. Int J Fatigue 25 (2003) 27-39
7. McDowell D.L. Microstructure-sensitive computational fatigue analysis. In: Yip S., and Horstemeyer M.F. (Eds). Handbook of materials modeling, part A: Methods (2005), Springer, The Netherlands 1193-1214
8. McDowell D.L. Simulation-based strategies for microstructure-sensitive fatigue modeling. Mater Sci Eng A 468-470 (2007) 4-14
9. Bennett V.P., and McDowell D.L. Crystal plasticity analyses of stationary, microstructurally small surface cracks in ductile single phase polycrystals. Fatigue Fract Eng Mater Struct 25 7 (2002) 677-693
10. Bennett V.P., and McDowell D.L. Crack tip displacements of microstructurally small surface cracks in single phase ductile polycrystals. Eng Fract Mech 70 (2003) 185-207
11. Dang-Van K. Macro-micro approach in high-cyclic multiaxial fatigue. In: McDowell DL, Ellis R, editors. Advances in multiaxial fatigue, ASTM STP 1191. Philadelphia; 1993. p. 120-30.
12. Socie DF. Critical plane approaches for multiaxial fatigue damage assessment. In: McDowell DL, Ellis R, editors. Advances in multiaxial fatigue, ASTM STP 1191. Philadelphia; 1993. p. 7-36.
13. Olson G.B. Designing a new material world. Science 288 (2000) 993-998
14. McDowell DL. Materials design: a useful research focus for inelastic behavior of structural metals. In: Sih GC, Panin VE, editors. Special issue of the theoretical and applied fracture mechanics, prospects of mesomechanics in the 21st century: current thinking on multiscale mechanics problems, vol. 37; 2001. p. 245-59.
15. Ambrico J.M., and Begley M.R. Plasticity in fretting contact. J Mech Phys Solids 48 11 (2000) 2391-2417
16. Fatemi A., and Socie D.F. Critical plane approach to multiaxial fatigue damage including out-of-phase loading. Fatigue Fract Eng Mater Struct 11 3 (1988) 149-165
17. Fatemi A., and Kurath P. Multiaxial fatigue life predictions under the influence of mean-stresses. J Eng Mater Technol, Trans ASME 110 4 (1988) 380-388
18. McDowell D.L. Multiaxial fatigue strength. ASM handbook. Fatigue and fracture vol. 19 (1996), ASM International 263-273
19. Findley K.O., and Saxena A. Low cycle fatigue in Rene 88DT at 650 °C: crack nucleation mechanisms and modeling. Metall Mater Trans A 37A 5 (2006) 1469-1475
20. Hoshide T., and Socie D.F. Mechanics of mixed mode small fatigue crack growth. Eng Fract Mech 26 6 (1987) 842-850
21. McDowell D.L., and Berard J.-Y. A ΔJ-based approach to biaxial fatigue. Fatigue Fract Eng Mater Struct 15 (1992) 719-741
22. Brown M., and Miller K.J. A theory for fatigue failure under multiaxial stress-strain conditions. Proc Inst Mech Eng 187 65 (1973) 745-755
23. Goh C.-H., McDowell D.L., and Neu R.W. Plasticity in polycrystalline fretting contacts. J Mech Phys Solids 54 2 (2006) 340-367
24. Manonukul A., and Dunne F.P.E. High- and low-cycle fatigue crack initiation using polycrystal plasticity. Proc Roy Soc London A 460 2047 (2004) 1881-1903
25. Le Biavant K., Pommier S., and Prioul C. Local texture and fatigue initiation in a Ti-6Al-4V titanium alloy. Fatigue Fract Eng Mater Struct 25 (2002) 527-545
26. Morrison D.J., and Moosbrugger J.C. Effects of grain size on cyclic plasticity and fatigue crack initiation in nickel. Int J Fatigue 19 (1997) S51-S59
27. Li C. Vector CTD analysis for crystallographic crack growth. Acta Metall Mater 38 11 (1990) 2129-2134
28. Fan J., McDowell D.L., Horstemeyer M.F., and Gall K. Computational micromechanics analysis of cyclic crack-tip behavior for microstructurally small cracks in dual-phase Al-Si alloys. Eng Fract Mech 68 (2001) 1687-1706
29. Shenoy M.M., Zhang J., and McDowell D.L. Estimating fatigue sensitivity to polycrystalline Ni-base superalloy microstructures using a computational approach. Fatigue Fract Eng Mater Struct 30 10 (2007) 889-904
30. Shenoy M., Tjiptowidjojo Y., and McDowell D.L. Microstructure-sensitive modeling of polycrystalline IN 100. Int J Plasticity 24 (2008) 1694-1730
31. McDowell D.L. Viscoplasticity of heterogeneous metallic materials. Mater Sci Eng R: Reports 62 3 (2008) 67-123
32. Krauss G. Deformation and fracture in martensitic carbon steels tempered at low temperatures. Metall Mater Trans A: Phys Metall Mater Sci 32 4 (2001) 861-877
33. Krauss G. Martensite in steel: strength and structure (1999), Elsevier, San Carlos de Bariloche, Argentina p. 40-57
34. Krauss G. Microstructure and performance of carburized steel. Part I: Martensite. Adv Mater Process 147 5 (1995) 40
35. Shin J.-C., Lee S., and Ryu J.H. Correlation of microstructure and fatigue properties of two high-strength spring steels. Int J Fatigue 21 6 (1999) 571-579
36. Zaccone M.A., Kelley J.B., and Krauss G. Strain hardening and fatigue of simulated case microstructures of carburized steels. Ind Heat 56 9 (1989) 7
37. Morrissey R., Goh C.-H., and McDowell D.L. Microstructure-scale modeling of HCF deformation. Mech Mater 35 3-6 (2003) 295-311
38. Marder A.R., and Krauss G. Formation of low carbon martensite in Fe-C alloys. ASM Trans Quart 62 4 (1969) 957-964
39. Marder A.R., and Krauss G. Morphology of martensite in iron-carbon alloys. Am Soc Metals - Trans 60 4 (1967) 651-660
40. Kitahara H., Ueji R., Tsuji N., and Minamino Y. Crystallographic features of lath martensite in low-carbon steel. Acta Mater 54 5 (2006) 1279-1288
41. Morito S., Saito H., Ogawa T., Furuhara T., and Maki T. Effect of austenite grain size on the morphology and crystallography of lath martensite in low carbon steels. ISIJ Int 45 1 (2005) 91-94
42. Morito S., Yoshida H., Maki T., and Huang X. Effect of block size on the strength of lath martensite in low carbon steels. Mater Sci Eng A 438-440 (2006) 237-240 [SPEC ISS]
43. Kuehmann C.J., and Olson G.B. Gear steels designed by computer. Adv Mater Process 153 5 (1998) 40-43
44. Tiemens BL. Performance optimization and computational design of ultra-high strength gear steels. Department of Materials Science and Engineering, PhD Thesis, Northwestern University, Evanston, IL; 2006.
45. Ceschini L., and Minak G. Fatigue behaviour of low temperature carburised AISI 316L austenitic stainless steel. Surf Coat Technol 202 9 (2008) 1778-1784
46. Tokaji K., and Akita M. Effect of carburizing on notch fatigue behaviour in AISI 316 austenitic stainless steel. Surf Coat Technol 200 20-21 (2006) 6073-6078
47. Farfan S., Rubio-Gonzalez C., Cervantes-Hernandez T., and Mesmacque G. High cycle fatigue, low cycle fatigue and failure modes of a carburized steel. Int J Fatigue 26 6 (2004) 673-678
48. Kawagoishi N., Nagano T., and Moriyama M. Effect of shot peening on fatigue strength of maraging steel. Sixth international conference on computer methods and experimental measurements for surface treatment effects crete, Greece (2003), WIT Press, Southampton, United Kingdom 99-108
49. Iwata N., Tomota Y., Katahira K., and Suzuki H. Effect of shot peening on fatigue fracture for an as quenched martensitic steel. Mater Sci Technol 18 6 (2002) 629-632
50. Brown J. Shot peening increases gear life. Power Transm Des 38 5 (1996) 61-64
51. Benedetti M., Fontanari V., Hohn B.R., Oster P., and Tobie T. Influence of shot peening on bending tooth fatigue limit of case hardened gears. Int J Fatigue 24 11 (2002) 1127-1136
52. Almen J.O. Fatigue weakness of surfaces. Prod Eng 21 11 (1950) 117-140
53. Sieber R. Bending fatigue performance of carburized gear steels, Detroit, MI, USA (1992), SAE, Warrendale, PA (USA) p. 1-18
54. Freborg A.M., Ferguson B.L., Li Z., Schwam D.X., and Smith B.J. Bending fatigue strength improvement of carburized aerospace gears, Phoenix, AZ, United States (2006), American Helicopter Society, Alexandria, VA 22314-2538 (United States) p. 2092-102
55. Krug T., Lang K.H., Fett T., and Lohe D. Influence of residual stresses and mean load on the fatigue strength of case-hardened notched specimens. Mater Sci Eng A 468-470 (2007) 158-163
56. Inoue K., and Kato M. Estimation of fatigue strength enhancement for carburized and shot-peened gears. J Propul Power 10 3 (1994) 362-368
57. Murakami Y., and Endo T. Effects of small defects on fatigue strength of metals. Int J Fatigue 2 1 (1980) 23-30
58. Toyoda T., Matsui T., and Murakami Y. A study of inclusions causing fatigue cracks in steels for carburized and shot peened gears. JSAE Rev 11 (1990) 50-54
59. Shiozawa K., and Lu L. Very high-cycle fatigue behaviour of shot-peened high-carbon-chromium bearing steel. Fatigue Fract Eng Mater Struct 25 8-9 (2002) 813-822
60. Xiao H., Chen Q., Shao E., Wu D., Chen Z., and Wang Z. The effect of shot peening on rolling contact fatigue behaviour and its crack initiation and propagation in carburized steel. Wear 151 1 (1991) 77-86
61. Prasannavenkatesan R., Zhang J., McDowell D.L., Olson G.B., and Jou H.-J. 3D modeling of subsurface fatigue crack nucleation potency of primary inclusions in heat treated and shot peened martensitic gear steels. Int J Fatigue (2009) 10.1016/j.ijfatigue.2008.12.001
62. Zhang J., Prasannavenkatesan R., Shenoy M., and McDowell D.L. Modeling fatigue crack nucleation potency at primary inclusions in carburized and shot-peened martensitic steel. Eng Fract Mech (2008) 10.1016/j.engfracmech.2008.10.011
63. Prasannavenkatesan R., McDowell D.L., Olson G.B., and Jou H.-J. Modeling effects of compliant coatings on HCF resistance of primary inclusions in high strength steels. J Eng Mater Technol 131 (2009) [0110112-1-6]
64. Hyzak J.M., and Bernstein I.M. The effect of defects on the fatigue crack initiation process in two P/M super-alloys. 1. Fatigue origins. Metall Trans A - Phys Metall Mater Sci 13 (1982) 33-43
65. Goto M., and Knowles D.M. Initiation and propagation behaviour of microcracks in Ni-base superalloy Udimet 720 Li. Eng Fract Mech 60 (1998) 1-18
66. Pang H.T., and Reed P.A.S. Fatigue crack initiation and short crack growth in nickel-base turbine disc alloys - the effects of microstructure and operating parameters. Int J Fatigue 25 (2003) 1089-1099
67. Jha S.K., Caton M.J., Larsen J.M., Rosenberger A.H., Li K., and Porter W.J. Superimposing mechanisms and their effect on the variability in fatigue lives of a nickel-based superalloy. In: Larsen J.M., Christodoulou L., Calcaterra J.R., Dent M.L., Derriso M.M., et al. (Eds). Materials damage prognosis (2005), TMS (The Minerals, Metals and Materials Society)
68. Miao J, Pollock TM, Jones JW. Very high cycle fatigue behavior of nickel-based superalloy René 88DT at 593 °C. In: VHCF-4: Fourth international conference on very high cycle fatigue, Ann Arbor, Michigan, USA; 2007.
69. Shyam A, Torbet CJ, Jha SK, Larsen JM, Caton MJ, Szczepanski CJ, et al. Development of ultrasonic fatigue for rapid high temperature fatigue studies in turbine engine materials, Champion, PA, United States; 2004. p. 259-68.
70. Antolovich S.D., and Jayaraman N. Metallurgical instabilities during the high-temperature low-cycle fatigue of nickel-base super-alloys. Mater Sci Eng 57 (1983) L9-L12
71. Lerch B.A., Jayaraman N., and Antolovich S.D. A study of fatigue damage mechanisms in Waspoloy from 25 °C to 800 °C. Mater Sci Eng 66 (1984) 151-166
72. Gumbel E.J. Statistics of extremes (1958), Columbia University Press, New York
73. Castillo E. Extreme value theory in engineering (1988), Academic, Boston
74. Pyrz R. Correlation of microstructure variability and local stress-field in two-phase materials. Mater Sci Eng A - Struct Mater Prop Microstruct Process 177 (1994) 253-259
75. Bucklew J.A. Introduction to rare event simulation (2004), Springer, New York
76. Shenoy MM. Constitutive modeling and life prediction in Ni-base superalloys. PhD Thesis, Georgia Institute of Technology, Atlanta, GA; 2006.
77. Wang A.-J., Kumar R.S., Shenoy M.M., and McDowell D.L. Microstructure-based multiscale constitutive modeling of γ - γ′ nickel-base superalloys. Int J Multiscale Comput Eng 4 5-6 (2006) 663-692
78. Shenoy M.M., Kumar R.S., and McDowell D.L. Modeling effects of nonmetallic inclusions on LCF in DS nickel-base superalloys. Int J Fatigue 27 (2005) 113-127
79. ABAQUS 6.6. Providence, RI, Simulia; 2006.
80. Swaminathan S., Ghosh S., and Pagano N.J. Statistically equivalent representative volume elements for unidirectional composite microstructures: part I - Without damage. J Compos Mater 40 (2006) 583-604
81. Swaminathan S., and Ghosh S. Statistically equivalent representative volume elements for unidirectional composite microstructures: part II - With interfacial debonding. J Compos Mater 40 (2006) 605-621
82. Mackenzie J.K. Second paper on statistics associated with the random disorientation of cubes. Biometrika 45 (1958) 229-240
83. Mackenzie J.K. The distribution of rotation axes in a random aggregate of cubic crystals. Acta Metall 12 (1964) 223-225
84. Przybyla C.P., Adams B.L., and Miles M.P. Methodology for determining the variance of the Taylor factor: application in Fe-3%Si. J Eng Mater Technol, Trans ASME 129 (2007) 82-93
85. Li K, Ashbaugh NE, Rosenberger AH. Crystallographic initiation of nickel-base superalloys IN100 at RT and 538 °C under low cycle fatigue conditions. In: Superalloys, Champion, Pennsylvania; 2004. p. 251-8.
86. Osterle W., and Bettge D. Modeling the orientation and direction dependence of the critical resolved shear stress of nickel-base superalloy single crystals. Acta Mater 48 (2000) 689-700
87. Kanazawa K., and Nishijima S. Fatigue fracture of low alloy steel at ultra-high-cycle region under elevated temperature condition. Zairyo/J Soc Mater Sci Jpn 46 12 (1997) 1396-1401
88. Nishijima S., and Kanazawa K. Stepwise S-N curve and fish-eye failure in gigacycle fatigue. Fatigue Fract Eng Mater Struct 22 7 (1999) 601-607
89. Cashman G.T. A statistical methodology for the preparation of a competing modes fatigue design curve. J Eng Mater Technol, Trans ASME 129 1 (2007) 159-168
90. Jha S.K., Caton M.J., and Larsen J.M. A new paradigm of fatigue variability behavior and implications for life prediction. Mater Sci Eng A 468-470 (2007) 23-32
91. Jha S.K., and Larsen J.M. Random heterogeneity scales and probabilistic description of the long-lifetime regime of fatigue. In: Allison J.E., Jones J.W., Larsen J.M., and Ritchie R.O. (Eds). Fourth international conference on very high cycle fatigue (VHCF-4) (2007), The Minerals, Metals & Materials Society (TMS), Ann Arbor, Michigan (USA) 385-396
92. Wang QY, Bathias C, Kawagoishi N, Chen Q. Characterization of S-N curve in gigacycle fatigue. In: SPIE proceedings series, international conference on experimental mechanics, No. 3, Beijing, China, 15-17 October, 2001, vol. L4537; 2002. p. 213-6.
93. Furuya Y., Abe T., and Matsuoka S. Inclusion-controlled fatigue properties of 1800 MPA-class spring steels. Metall Mater Trans A: Phys Metall Mater Sci 35A 12 (2004) 3737-3744
94. Kueppenbender I., and Schuetze M. Deformation behavior of NiO scales on Ni in argon and air at temperatures from 20 to 800 °C with respect to the relief of growth stresses. Oxid Met 42 1-2 (1994) 109-144
95. Bruns C., and Schutze M. Investigation of the mechanical properties of oxide scales on nickel and TiAl. Oxid Met 55 1-2 (2001) 35-68
96. Johnson J.B., Nicholls J.R., Hurst R.C., and Hancock P. The mechanical properties of surface oxides on nickel-base superalloys. I. Oxidation. Corros Sci 18 6 (1978) 527-541
97. de Bussac A. Prediction of the competition between surface and internal fatigue crack initiation in PM alloys. Fatigue Fract Eng Mater Struct 17 11 (1994) 1319-1325
98. Lemaitre J., and Chaboche J.L. Mechanics of solid materials (1990), Cambridge University Press