Crystal plasticity finite element simulations using a database of discrete Fourier transforms

International Journal of Plasticity

Volumn 66, Issue , 2015, Pages 71-84

  Alharbi, Hamad F ^a,b   Kalidindi, Surya R ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b KING SAUD UNIVERSITY   (Saudi Arabia)

Author keywords

Crystal plasticity; Discrete Fourier transforms; Finite element simulations; Microstructure; Plastic deformation

Indexed keywords

ABAQUS; COMPUTATION THEORY; CRYSTAL MICROSTRUCTURE; DATABASE SYSTEMS; DISCRETE FOURIER TRANSFORMS; METALS; MICROSTRUCTURE; PLASTIC DEFORMATION; POLYCRYSTALLINE MATERIALS; SINGLE CRYSTALS;

COMMERCIAL FINITE ELEMENT CODES; COMPUTATIONALLY EFFICIENT; CRYSTAL PLASTICITY; CRYSTAL PLASTICITY FINITE ELEMENT; CRYSTAL PLASTICITY FINITE ELEMENT METHOD; DISCRETE FOURIER TRANSFORM (DFTS); FINITE ELEMENT SIMULATIONS; HETEROGENEOUS DEFORMATION;

FINITE ELEMENT METHOD;

EID: 84961289908     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2014.04.006     Document Type: Article

References (65)

1. ABAQUS, 2010. © Dassault Systèmes Simulia Corp., Providence, RI, USA.
2. H.F. Al-Harbi, M. Knezevic, and S.R. Kalidindi Spectral approaches for the fast computation of yield surfaces and first-order plastic property closures for polycrystalline materials with cubic-triclinic textures CMC - Comput. Mater. Continua 15 2010 153 172
3. R.J. Asaro, and A. Needleman Overview no. 42 texture development and strain hardening in rate dependent polycrystals Acta Metall. 33 1985 923 953
4. R.J. Asaro, and A. Needleman Texture development and strain hardening in rate dependent polycrystals Acta Metall. Mater. 33 1985 923 953
5. V. Bachu, and S.R. Kalidindi On the accuracy of the predictions of texture evolution by the finite element technique for fcc polycrystals Mater. Sci. Eng. A - Struct. Mater. Prop. Microstruct. Process. 257 1998 108 117
6. A. Bhattacharyya, E. El-Danaf, S.R. Kalidindi, and R.D. Doherty Evolution of grain-scale microstructure during large strain simple compression of polycrystalline aluminum with quasi-columnar grains: OIM measurements and numerical simulations Int. J. Plasticity 17 2001 861 883
7. F. Bridier, D.L. McDowell, P. Villechaise, and J. Mendez Crystal plasticity modeling of slip activity in Ti-6Al-4V under high cycle fatigue loading Int. J. Plasticity 25 2009 1066 1082
8. C.A. Bronkhorst, S.R. Kalidindi, and L. Anand Polycrystalline plasticity and the evolution of crystallographic texture in fcc metals Philos. Trans. Roy. Soc. Lond. Ser. A - Math. Phys. Eng. Sci. 341 1992 443 477
9. C.A. Bronkhorst, S.R. Kalidindi, and L. Anand Polycrystalline plasticity and the evolution of crystallographic texture in FCC metals Philos. Trans. Roy. Soc. Lond. Ser. A - Math. Phys. Eng. Sci. 341 1992 443 477
10. S.B. Brown, K.H. Kim, and L. Anand An internal variable constitutive model for hot working of metals Int. J. Plasticity 5 1989 95 130
11. H.-J. Bunge Texture Analysis in Materials Science 1993 Mathematical Methods Cuvillier Verlag, Göttingen
12. S.H. Choi, D.W. Kim, B.S. Seong, and A.D. Rollett 3-D simulation of spatial stress distribution in an AZ31 Mg alloy sheet under in-plane compression Int. J. Plasticity 27 2011 1702 1720
13. F. Delaire, J.L. Raphanel, and C. Rey Plastic heterogeneities of a copper multicrystal deformed in uniaxial tension: experimental study and finite element simulations Acta Mater. 48 2000 1075 1087
14. L. Delannay, S.R. Kalidindi, and P. Van Houtte Quantitative prediction of textures in aluminium cold rolled to moderate strains Mater. Sci. Eng. A 336 2002 233 244
15. P. Erieau, and C. Rey Modeling of deformation and rotation bands and of deformation induced grain boundaries in IF steel aggregate during large plane strain compression Int. J. Plasticity 20 2004 1763 1788
16. H. Garmestani, S.R. Kalidindi, L. Williams, C.M. Bacaltchuk, C. Fountain, E.W. Lee, and O.S. Es-Said Modeling the evolution of anisotropy in Al-Li alloys: application to Al-Li 2090-T8E41 Int. J. Plasticity 18 2002 1373 1393
17. C.-H. Goh, R.W. Neu, and D.L. McDowell Crystallographic plasticity in fretting of Ti-6AL-4V Int. J. Plasticity 19 2003 1627 1650
18. E. Héripré, M. Dexet, J. Crépin, L. Gélébart, A. Roos, M. Bornert, and D. Caldemaison Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials Int. J. Plasticity 23 2007 1512 1539
19. W.F. Hosford, and R.M. Caddell Metal Forming Mechanics and Metallurgy 1993 Prentice-Hall Inc.
20. J.W. Hutchinson Bounds and self-consistent estimates for creep of polycrystalline materials Proc. Roy. Soc. Lond. A. Math. Phys. Sci. 348 1976 101 127
21. S.R. Kalidindi, and L. Anand Macroscopic shape change and evolution of crystallographic texture in pre-textured fcc metals J. Mech. Phys. Solids 42 1994 459 490
22. S.R. Kalidindi, and S.E. Schoenfeld On the prediction of yield surfaces by the crystal plasticity models for fcc polycrystals Mater. Sci. Eng. A - Struct. Mater. Prop. Microstruct. Process. 293 2000 120 129
23. S.R. Kalidindi, C.A. Bronkhorst, and L. Anand Crystallographic texture evolution in bulk deformation processing of FCC metals J. Mech. Phys. Solids 40 1992 537 569
24. S.R. Kalidindi, A. Bhattacharyya, and R.D. Doherty Detailed analyses of grain-scale plastic deformation in columnar polycrystalline aluminium using orientation image mapping and crystal plasticity models Proc. Roy. Soc. Lond. Ser. A: Math., Phys. Eng. Sci. 460 2004 1935 1956
25. S.R. Kalidindi, H.K. Duvvuru, and M. Knezevic Spectral calibration of crystal plasticity models Acta Mater. 54 2006 1795 1804
26. S.R. Kalidindi, M. Knezevic, S. Niezgoda, and J. Shaffer Representation of the orientation distribution function and computation of first-order elastic properties closures using discrete Fourier transforms Acta Mater. 57 2009 3916 3923
27. A.K. Kanjarla, P. Van Houtte, and L. Delannay Assessment of plastic heterogeneity in grain interaction models using crystal plasticity finite element method Int. J. Plasticity 26 2010 1220 1233
28. M. Knezevic, S.R. Kalidindi, and D. Fullwood Computationally efficient database and spectral interpolation for fully plastic Taylor-type crystal plasticity calculations of face-centered cubic polycrystals Int. J. Plasticity 24 2008 1264 1276
29. M. Knezevic, H.F. Al-Harbi, and S.R. Kalidindi Crystal plasticity simulations using discrete Fourier transforms Acta Mater. 57 2009 1777 1784
30. U.F. Kocks, and H. Mecking Physics and phenomenology of strain hardening: the FCC case Prog. Mater. Sci. 48 2003 171 273
31. A. Lebensohn N-site modeling of a 3D viscoplastic polycrystal using fast Fourier transform Acta Mater. 49 2001 2723 2737
32. R.A. Lebensohn, and C.N. Tomé A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys Acta Metall. Mater. 41 1993 2611 2624
33. R.A. Lebensohn, P.R. Dawson, H.M. Kern, and H.-R. Wenk Heterogeneous deformation and texture development in halite polycrystals: comparison of different modeling approaches and experimental data Tectonophysics 370 2003 287 311
34. R.A. Lebensohn, Y. Liu, and P. Ponte Castañeda On the accuracy of the self-consistent approximation for polycrystals: comparison with full-field numerical simulations Acta Mater. 52 2004 5347 5361
35. R.A. Lebensohn, C.N. Tome, and P.P. Castaneda Self-consistent modelling of the mechanical behaviour of viscoplastic polycrystals incorporating intragranular field fluctuations Philos. Mag. 87 2007 4287 4322
36. R.A. Lebensohn, R. Brenner, O. Castelnau, and A.D. Rollett Orientation image-based micromechanical modelling of subgrain texture evolution in polycrystalline copper Acta Mater. 56 2008 3914 3926
37. Y.S. Liu, L. Delannay, and P. Van Houtte Application of the Lamel model for simulating cold rolling texture in molybdenum sheet Acta Mater. 50 2002 1849 1856
38. B. Liu, D. Raabe, F. Roters, P. Eisenlohr, and R.A. Lebensohn Comparison of finite element and fast Fourier transform crystal plasticity solvers for texture prediction Modell. Simul. Mater. Sci. Eng. 18 2010 085005
39. M. Luo, and G. Rousselier Modeling of large strain multi-axial deformation of anisotropic metal sheets with strength-differential effect using a Reduced Texture Methodology Int. J. Plasticity 53 2014 66 89
40. J.R. Mayeur, and D.L. McDowell A three-dimensional crystal plasticity model for duplex Ti-6Al-4V Int. J. Plasticity 23 2007 1457 1485
41. J.R. Mayeur, D.L. McDowell, and R.W. Neu Crystal plasticity simulations of fretting of Ti-6Al-4V in partial slip regime considering effects of texture Comput. Mater. Sci. 41 2008 356 365
42. D.L. McDowell A perspective on trends in multiscale plasticity Int. J. Plasticity 26 2010 1280 1309
43. A. Molinari, G.R. Canova, and S. Ahzi A self consistent approach of the large deformation polycrystal viscoplasticity Acta Metall. 35 1987 2983 2994
44. A. Musienko, A. Tatschl, K. Schmidegg, O. Kolednik, R. Pippan, and G. Cailletaud Three-dimensional finite element simulation of a polycrystalline copper specimen Acta Mater. 55 2007 4121 4136
45. A. Needleman, R.J. Asaro, J. Lemonds, and D. Peirce Finite element analysis of crystalline solids Comput. Methods Appl. Mech. Eng. 52 1985 689 708
46. J. Pan, and J.R. Rice Rate sensitivity of plastic flow and implications for yield-surface vertices Int. J. Solids Struct. 19 1983 973 987
47. D. Peirce, R.J. Asaro, and A. Needleman An analysis of nonuniform and localized deformation in ductile single crystals Acta Metall. 30 1982 1087 1119
48. D. Peirce, R.J. Asaro, and A. Needleman Material rate dependence and localized deformation in crystalline solids Acta Metall. 31 1983 1951 1976
49. A. Prakash, and R.A. Lebensohn Simulation of micromechanical behavior of polycrystals: finite elements versus fast Fourier transforms Modell. Simul. Mater. Sci. Eng. 17 2009 064010
50. D. Raabe, and F. Roters Using texture components in crystal plasticity finite element simulations Int. J. Plasticity 20 2004 339 361
51. D. Raabe, Z. Zhao, and F. Roters A finite element method on the basis of texture components for fast predictions of anisotropic forming operations Steel Res. 72 2001 421 426
52. D. Raabe, Z. Zhao, and W. Mao On the dependence of in-grain subdivision and deformation texture of aluminum on grain interaction Acta Mater. 50 2002 4379 4394
53. D. Raabe, Z. Zhao, and F. Roters Study on the orientational stability of cube-oriented FCC crystals under plane strain by use of a texture component crystal plasticity finite element method Scripta Mater. 50 2004 1085 1090
54. D. Raabe, Y. Wang, and F. Roters Crystal plasticity simulation study on the influence of texture on earring in steel Comput. Mater. Sci. 34 2005 221 234
55. G. Rousselier, M. Luo, and D. Mohr Macroscopic plasticity modeling of anisotropic aluminum extrusions using a reduced texture methodology Int. J. Plasticity 30-31 2012 144 165
56. M. Sachtleber, Z. Zhao, and D. Raabe Experimental investigation of plastic grain interaction Mater. Sci. Eng., A 336 2002 81 87
57. L. St-Pierre, E. Héripré, M. Dexet, J. Crépin, G. Bertolino, and N. Bilger 3D simulations of microstructure and comparison with experimental microstructure coming from O.I.M analysis Int. J. Plasticity 24 2008 1516 1532
58. P. Suquet, H. Moulinec, O. Castelnau, M. Montagnat, N. Lahellec, F. Grennerat, P. Duval, and R. Brenner Multi-scale modeling of the mechanical behavior of polycrystalline ice under transient creep Proc. IUTAM 3 2012 76 90
59. Taylor, 1938. Plastic Strain in Metals.
60. I. Tikhovskiy, D. Raabe, and F. Roters Simulation of earing during deep drawing of an Al-3% Mg alloy (AA 5754) using a texture component crystal plasticity FEM J. Mater. Process. Technol. 183 2007 169 175
61. P. Van Houtte Application of plastic potentials to strain rate sensitive and insensitive anisotropic materials Int. J. Plasticity 10 1994 719 748
62. P. Van Houtte, L. Delannay, and S.R. Kalidindi Comparison of two grain interaction models for polycrystal plasticity and deformation texture prediction Int. J. Plasticity 18 2002 359 377
63. P. Van Houtte, S. Li, M. Seefeldt, and L. Delannay Deformation texture prediction: from the Taylor model to the advanced Lamel model Int. J. Plasticity 21 2005 589 624
64. P. Van Houtte, A.K. Kanjarla, A. Van Bael, M. Seefeldt, and L. Delannay Multiscale modelling of the plastic anisotropy and deformation texture of polycrystalline materials Eur. J. Mech. A. Solids 25 2006 634 648
65. Z. Zhao, M. Ramesh, D. Raabe, A.M. Cuitiño, and R. Radovitzky Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal Int. J. Plasticity 24 2008 2278 2297