Microstructure-Sensitive Design for Performance Optimization

Microstructure-Sensitive Design for Performance Optimization

Volumn , Issue , 2013, Pages

  Adams, Brent L ^a   Kalidindi, Surya R ^b   Fullwood, David T ^a  

^a Department of Electrical and Computer Engineering   (United States)

^b DREXEL UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85013709972     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/C2011-0-07501-4     Document Type: Book

References (132)

1. Adams B.L., Canova G.R., Molinari A. A statistical formulation of viscoplastic behavior in heterogeneous polycrystals. Textures and Microstructures 1989, 11:57.
2. Adams B.L., Field D.P. Statistical theory of creep in polycrystalline materials. Acta Metallurgica et Materialia 1991, 39(10):2405-2417.
3. Adams B.L., Gao X., Kalidindi S.R. Finite approximations to the second-order properties closure in single phase polycrystals. Acta Materialia 2005, 53(13):3563-3577.
4. Adams B.L., Henrie A., Henrie B., Lyon M., Kalidindi S.R., Garmestani H. Microstructure-sensitive design of a compliant beam. Journal of the Mechanics and Physics of Solids 2001, 49(8):1639-1663.
5. Adams B.L., Kacher J. EBSD-based microscopy: Resolution of dislocation density. Computers, Materials and Continua 2009, 14(3):185-196.
6. Adams B.L., Wright S.I., Kunze K. Orientation imaging: The emergence of a new microscopy. Metallurgical Transactions A (Physical Metallurgy and Materials Science) 1993, 24A(4):819-831.
7. Arnold S.M., Saleeb A.F., Al-Zoubi N.R. Deformation and life analysis of composite flywheel disk and multi-disk systems. NASA/TM (2001-210578) 2001.
8. Asaro R.J. Crystal plasticity. Journal of Applied Mechanics 1983, 50(4b):921-934.
9. Asaro R.J. Micromechanics of crystals and polycrystals. Advances in Applied Mechanics 1983, 23:1-115.
10. Asaro R.J., Needleman A. Texture development and strain hardening in rate dependent polycrystals. Acta Metallurgica et Materialia 1985, 33(6):923-953.
11. Asaro R.J., Rice J.R. Strain localization in ductile single crystals. Journal of the Mechanics and Physics of Solids 1977, 25(5):309-338.
12. Balling R.J. Pareto sets in decision-based design. Journal of Engineering Valuation and Cost Analysis 2000, 3(2):189-198.
13. Basinger J., Fullwood D., Kacher J., Adams B. Pattern center determination in EBSD microscopy. Microscopy and Microanalysis 2011, 17:330-340.
14. Basinger, J. A., C. J. Gardner, Fullwood, D.T., Adams, B.L. Pattern center sensitivity for simulated reference patterns in high resolution electron backscatter diffraction. Microscopy and Microanalysis.
15. Bassani J.L., Wu T.Y. Latent hardening in single crystals, II. Analytical characterization and prediction. Proceedings of the Royal Society of London, Series A 1991, 435:21-41.
16. Boggs P.T., Tolle J.W. Sequential quadratic programming for large-scale nonlinear optimization. Journal of Computational and Applied Mathematics 2000, 124(1-2):123-137.
17. Bracewell R.N. The Fourier Transform and Its Applications 1978, McGraw-Hill.
18. Brewer L.N., Field D.P., Merriman C.C. Mapping and Assessing Plastic Deformation Using EBSD. Electron Backscatter Diffraction in Materials Science 2009, 251-262. Springer-Verlag. 2nd ed. A.J. Schwartz, M. Kumar, B.L. Adams, D.P. Field (Eds.).
19. Britton T.B., Wilkinson A.J. Measurement of residual elastic strain and lattice rotations with high resolution electron backscatter diffraction. Ultramicroscopy 2011, 111(8):1395-1404.
20. Brown W.F. Solid mixture permittivities. The Journal of Chemical Physics 1955, 33(8):1514-1517.
21. Bunge H.-J. Texture Analysis in Materials Science: Mathematical Methods 1993, Cuvillier-Verlag.
22. Bunge H., Esling C. Texture development by plastic deformation. Scripta Metall 1984, 18:191-195.
23. Caflisch R.E. Monte Carlo and quasi-Monte Carlo methods. Acta Numerica 1998, 7:1-49.
24. Caratheodory C. Ueber den Variabilitätsbereich der Fourierschen Konstanten von positiven harmonischen Functionen. Rend. Circ. Mat. Palermo 1911, 32:193-217.
25. Carpenter D.A., Pugh J.L., Richardson G.D., Mooney L.R. Determination of pattern centre in EBSD using the moving-screen technique. Journal of Microscopy 2007, 227(September):246-247.
26. Cermelli P., Gurtin M.E. On the characterization of geometrically necessary dislocations in finite plasticity. Journal of the Mechanics and Physics of Solids 2001, 49(7):1539-1568.
27. Chamis C. Mechanics of composite materials: Past, present, and future. Journal of Composites Technology and Research 1989, 11(1):3-14.
28. Champeney D.C. Fourier Transforms and Their Physical Applications 1973, Academic Press.
29. Clement A. Prediction of deformation texture using a physical principle of conservation. Materials Science and Engineering 1982, 55:203-210.
30. Cohen L. Generalization of the Wiener-Khinchin theorem. Signal Processing Letters, IEEE 1998, 5(11):292-294.
31. Das I., Dennis J.E. A closer look at drawbacks of minimizing weighted sums of objectives for Pareto set generation in multicriteria optimization problems. Struct. Optim. 1997, 14:63-69.
32. Das I., Dennis J.E. "Normal-boundary intersection: A new method for generating Pareto optimal points in multicriteria optimization problems." SIAM J. Optim 1998, 8:631-657.
33. Delesse M.A. Procédé méchanique pour déterminer la composition des roches. Comptes Rendus Acad. Sci. (Paris) 1847, 25:544-545.
34. EDAX-TSL, 2010. Manual for Orientation Imaging Microscopy (OIM™), version 6.0.
35. El-Dasher B.S., Adams B.L., Rollett A.D. Viewpoint: Experimental recovery of geometrically necessary dislocation density in polycrystals. Scripta Materialia 2003, 48(2):141-145.
36. Engler O., Randle V. Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping 2010, CRC Press/Taylor and Francis Group.
37. Eshelby J.D. The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc. R. Soc. Lond. A 1957, 241:376-396.
38. Field D.P., Magid K.R., Mastorakos I.N., Florando J.N., Lassila D.H., Morris J.W. Mesoscale strain measurement in deformed crystals: A comparison of X-ray microdiffraction with electron backscatter diffraction. Philosophical Magazine 2010, 90(11):1451-1464.
39. Field D.P., Merriman C.C., Allain-Bonasso N., Wagner F. Quantification of dislocation structure heterogeneity in deformed polycrystals by EBSD. Model. Simul. Mater. Sci. Eng. 2012, 20:1-12.
40. Frisch H.L., Stillinger F.H. Contribution to the statistical geometric basis of radiation scattering. The Journal of Chemical Physics 1963, 38(9):2200-2207.
41. Fullwood D.T., Adams B.L., Kalidindi S.R. A strong contrast homogenization formulation for multi-phase anisotropic materials. J. Mech. Phys. Solids 2008, 56(6):2287-2297.
42. Fullwood D.T., Kalidindi S.R., Adams B.L., Ahmadi S. A discrete Fourier transform framework for localization relations. Computers, Materials and Continua 2009, 299(1):1-14.
43. Fullwood D.T., Kalidindi S.R., Niezgoda S.R., Fast T., Hampson N. Gradient-based microstructure reconstructions from distributions using fast Fourier transforms. Materials Science and Engineering A 2008, 494:68-72.
44. Fullwood D.T., Niezgoda S.R., Kalidindi S.R. Microstructure reconstructions from 2-point statistics using phase recovery algorithms. Acta Materialia 2008, 56(5):942-948.
45. Gardner C.J., Adams B.L., Basinger J., Fullwood D.T. EBSD-based continuum dislocation microscopy. International Journal of Plasticity 2010, 26:1234-1247.
46. Gelfand I., Minlos R., Shapiro ZYa Representations of the Rotation and Lorentz Groups and Their Applications 1963, Pergamon Press.
47. Glagolev A.A. On the geometrical methods of quantitative minerologic analysis of rocks. Transactions Inst. Econ. Min. (Moscow) 1934, 59:1-47.
48. Gokhale A.M., Tewari A., Garmestani H. Constraints on microstructural two-point correlation functions. Scripta Materialia 2005, 53(8):989-993.
49. Hamermesh M. Group Theory and Its Application to Physical Problems 1962, Addison Wesley.
50. Hashin Z., Shtrikman S. A variational approach to the theory of the elastic behaviour of multiphase materials. Journal of the Mechanics and Physics of Solids 1963, 11(2):127-140.
51. Herakovich C.T. Mechanics of Fibrous Composites 1998, John Wiley & Sons.
52. Hill R. A theory of the yielding and plastic flow of anisotropic metals. Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences 1948, 193(1033):281-297.
53. Hill R. The elastic behavior of a crystalline aggregate. Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences 1952, 65:349-354.
54. Hill R. A self-consistent mechanics of composite materials. J. Mech. Phys. Solids 1965, 13:213-222.
55. Hill R. Generalized constitutive relations for incremental deformation of metal crystals by multislip. J. Mech. Phys.Solids 1966, 14:95-102.
56. Hill R., Rice J.R. Constitutive analysis of elastic-plastic crystals at arbitrary strain. Journal of the Mechanics and Physics of Solids 1972, 20(6):401-413.
57. Houskamp J.R., Proust G., Kalidindi S.R. Integration of microstructure sensitive design with finite element methods: Elastic-plastic case studies in FCC polycrystals. Int. J. Multiscale Eng. 2007, 5:261-272.
58. Hutchinson J.W. Bounds and self-consistent estimates for creep of polycrystalline materials. Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences (348) 1976, 101-126.
59. Jiao Y., Stillinger F.H., Torquato S. Modeling heterogeneous materials via two-point correlation functions: Basic principles. Physical Review E (Statistical, Nonlinear, and Soft Matter Physics 2007, 76(3):31110-31115.
60. Kacher J. High resolution cross-correlation-based texture analysis using kinematically simulated EBSD patterns 2009, Brigham Young University, Provo, UT.
61. Kacher J., Basinger J., Adams B.L., Fullwood D.T. Reply to comment by Maurice, et al. in response to "Bragg's law diffraction simulations for electron backscatter diffraction analysis. Ultramicroscopy 2010, 110(7):760-762.
62. Kacher J., Landon C., Adams B.L., Fullwood D. Bragg's Law Diffraction Simulations for Electron Backscatter Diffraction Analysis. Ultramicroscopy 2009, 109(9):1148-1156.
63. Kalidindi S.R., Anand L. Large deformation simple compression of a copper single-crystal. Metallurgical Transactions A 1993, 24(4):989-992.
64. Kalidindi S.R., Binci M., Fullwood D., Adams B.L. Elastic properties closures using second-order homogenization theories: Case studies in composites of two isotropic constituents. Acta Materialia 2006, 54(11):3117-3126.
65. Kalidindi S.R., Bronkhorst C.A., Anand L. Crystallographic texture evolution in bulk deformation processing of FCC metals. Journal of the Mechanics and Physics of Solids 1992, 40(3):537-569.
66. Kalidindi S.R., Houskamp J.R., Lyons M., Adams B.L. Microstructure sensitive design of an orthotropic plate subjected to tensile load. International Journal of Plasticity 2004, 20(8-9):1561-1575.
67. Kerner E.J. The elastic and thermo-elastic properties of composite media. Proc. Phys. Soc. Ser. B 1956, 69(8):808-813.
68. Kim I.Y., de Weck O.L. Adaptive weighted-sum method for bi-objective optimization: Pareto front generation. Struct. Multidisc. Optim. 2005, 29:149-158.
69. Kocks U.F., Argon A.S., Ashby M.F. Thermodynamics and kinetics of slip. Prog. Mat. Sci. 1975, 19:1-291.
70. Koski J. Defectiveness of weighting method in multicriterion optimization of structures. Commun. Appl. Numer. Methods 1985, 1:333-337.
71. Kregers A., Teters G. Use of averaging methods to determine the viscoelastic properties of spatially reinforced composites. Mechanics of Composite Materials 1979, 4:617-625.
72. Krieger-Lassen N.C., Conradsen K., Jensen D.J. Image processing procedures for analysis of electron back scattering patterns. Scanning Microscopy 1992, 6:115-121.
73. Krieger N.C., Lassen Source point calibration from an arbitrary electron backscattering pattern. Journal of Microscopy 1999, 195:204-211.
74. Kroner E. Continuum theory of dislocations and self-stresses. Ergebnisse der Angewandten Mathematik 1958, 5:1327-1347.
75. Kröner E. Bounds for effective elastic moduli of disordered materials. J. Mech. Phys. Solids 1977, 25:137-155.
76. Kröner E. Statistical modeling: Modeling small deformation in polycrystals 1986, Elsevier. J. Gittus, J. Zarka (Eds.).
77. Kysar J.W., Saito Y., Oztop M.S., Lee D., Huh W.T. Experimental lower bounds on geometrically necessary dislocation density. International Journal of Plasticity 2010, 26:1097-1123.
78. Landon C., Adams B., Kacher J. High resolution methods for characterizing mesoscale dislocation structures. Journal of Engineering Materials and Technology 2008, 130(2):40-45.
79. Lee E.H. Elastic-Plastic Deformation at Finite Strains. Journal of Applied Mechanics 1969, 36:1-6.
80. Lekhnitskii S.G. Anisotropic Plates 1968, Gordon and Breach.
81. Lyon M., Adams B.L. Gradient-based non-linear microstructure design. Journal of the Mechanics and Physics of Solids 2004, 52:2569-2586.
82. Mathworks Matlab. The Mathworks, Inc. 2007.
83. Messac A., Mattson C.A. Generating well-distributed sets of Pareto points for engineering design using physical programming. Optim. Eng. 2002, 3:431-450.
84. Midha A., Norton T.W., Howell L.L. On the nomenclature, classification, and abstractions of compliant mechanisms. Journal of Mechanical Design, Trans. ASME (116) 1994, 270-279.
85. Milton G.W. The Theory of Composites 2002, Cambridge University Press.
86. Molinari A., Canova G.R., Ahzi S. Self-consistent approach of the large deformation polycrystal viscoplasticity. Acta Metallurgica et Materialia 1987, 35(12):2983-2994.
87. Morawiec A. Orientations and Rotations-Computations in Crystallographic Textures 2004, Springer-Verlag.
88. Mori T., Tanaka K. Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall 1973, 21:571-574.
89. Nemat-Nasser S., Hori M. Micromechanics: Overall Properties of Heterogeneous Materials 1999, Elsevier.
90. Norris A.N. The isotropic material closest to a given anisotropic material. J. Mech. Materials Structures 2006, 1(2):231-246.
91. Nowell M.M., Field D.P. Texture and grain boundary structure dependence of Hillock formation in thin metal films. Mat. Res. Soc. Symp. Proc. 1998, 516:115-120.
92. Nowell M.M., Wright S.I. Phase differentiation via combined EBSD and XEDS. Journal of Microscopy 2004, 213:296-305.
93. Nowell M.M., Wright S.I. Orientation effects on indexing of electron backscatter diffraction patterns. Ultramicroscopy 2005, 103:41-58.
94. Nye J.F. Some geometrical relations in dislocated crystals. Acta Metallurgica 1953, 1:153-162.
95. Olson G.B. Computational Design of Hierarchically Structured Materials. Science 1997, 277(29):1237-1242.
96. Pantleon W. Resolving the goemetrically necessary dislocation content by conventional electron backscattering diffraction. Scripta Materialia 2008, 58:994-997.
97. Paul B. Prediction of elastic constants of multiphase materials. Trans. Metall. Soc. AIME 1960, 218:36-41.
98. Peirce D., Asaro R.J., Needleman A. Material rate dependence and localized deformation in crystalline solids. Acta Metallurgica et Materialia 1983, 31(12):1951-1976.
99. Pospiech J., Jura J. Fourier coefficients of the generalized spherical function and an exemplary computer program. Kristall und Technik 1975, 10:783-787.
100. Proust G., Kalidindi S.R. Procedures for construction of anisotropic elastic-plastic property closures for face-centered cubic polycrystals using first-order bounding relations. Journal of the Mechanics and Physics of Solids 2006, 54(8):1744-1762.
101. Reuss A. Berechnung der Fliebgrenze von Mischkristallen auf Grund der Plastizitatsbedingung fur Einkristalle. Zeitschrift fur Angewandte Mathematik und Mechanik 1929, 9:49-58.
102. Rice J.R. Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity. Journal of the Mechanics and Physics of Solids 1971, 19(6):433-455.
103. Rosen B.W., Hashin Z. Effective thermal expansion coefficients and specific heats of composite materials. Int. J. Engng. Sci. 1970, 8:157-173.
104. Rosiwal A. Ueber geometrische Gesteinanalysen. verhandlugen K.K. des Geolische Rechsanstalt, Wein 1898, 13:143-175.
105. Ruggles, T., D. Fullwood (in press). Estimation of bulk dislocation density based on known distortion gradients recovered from EBSD. Ultramicrosopy.
106. Sachs G. Zur Ableitung einer Fließbedingung. Z. Ver. Deu. Ing. 1928, 72(22):734.
107. Saheli G., Garmestani H., Adams B.L. Microstructure design of a two phase composite using two-point correlation functions. Journal of Computer-Aided Materials Design 2004, 11:103-115.
108. Sintay D.S., Adams B.L. Microstructure design for a rotating disk: With application to turbine engines 2005, IDETC/CIE, 31st Design Automation Conference, Long Beach, CA.
109. Suquet P. Elements of homogenization for inelastic solid mechanics. Homogenization Techniques for Composite Media, Lecture Notes in Physics 272 1987, 193-278. Springer-Verlag. E. Sanchez-Palencia, A. Zaoui (Eds.).
110. Taylor G.I. Plastic strain in metals. Journal of the Institute of Metals 1938, 62:307-324.
111. Thomsen E. Quantitative microscopic analysis. Journal of Geology 1930, 38:193-221.
112. Torquato S. Effective stiffness tensor of composite media. I. Exact series expansions. J. Mech. Phys. Solids 1997, 45:1421-1448.
113. Torquato S. Random Heterogeneous Materials. Springer-Verlag 2002.
114. Torquato S. Necessary conditions on realizable two-point correlation functions of random media. Ind. Eng. Chem. Res. 2006, 45(21):6923-6928.
115. Troost K.Z., van der Sluis P., Gravesteijn D.J. Microscale elastic-strain determination by backscatter Kikuchi diffraction in the scanning electron microscope. Appl. Phys. Lett. 1993, 62(10):1110-1112.
116. Troost K.Z., van der Sluis P., Gravesteijn D.J. Microscale elastic-strain determination by backscatter Kikuchi diffraction in the scanning electron microscope. Appl. Phys. Lett. 1993, 62(10):1110-1112.
117. Uche O.U., Stillinger F.H., Torquato S. On the realizability of pair correlation functions. Physica A: Statistical Mechanics and Its Applications 2006, 360(1):21-36.
118. Van den Boogaart K.G. Statistics for Individual Crystallographic Orientation Measurements 2002, Springer-Verlag.
119. Venables J.A., Bin Jaya R. Accurate microcrystallography using electron back-scattering patterns. Phil. Mag 1977, 35(5):1317-1332.
120. Villert S., Maurice C., Wyon C., Fortunier R. Accuracy assessment of elastic strain measurement by EBSD. Journal of Microscopy 2009, 233(2):290-301.
121. Voigt W. Lehrbuch der krystallphysik 1910, Teubner: xxiv.
122. Walker J.S. Fast Fourier Transform 1996, CRC Press.
123. Wikipedia 2007, JPEG Available at. http://en.wikipedia.org/wiki/Jpeg.
124. Wilkinson A.J., Meaden G., Dingley D.J. High-resolution elastic strain measurement from electron backscatter diffraction patterns: New levels of sensitivity. Ultramicroscopy 2006, 106:307-313.
125. Willis J.R. Variational and related methods for the overall properties of composites. Adv. Appl. Mech 1981, 21:1-78.
126. Winkelmann A. Simulation of electron backscatter diffraction patterns. Microscopy and Microanalysis 2007, 13:930-931.
127. Wright S.I. Review of automated orientation imaging microscopy (OIM). Journal of Computer-Assisted Microscopy 1993, 5(3):207-221.
128. Wright S.I. Fundamentals of automated EBSD. Electron Backscatter Diffraction in Materials Science 2000, 51-64. Kluwer Academic/Plenum Publishers. A.J. Schwartz, M. Kumar, B.L. Adams (Eds.).
129. Wright S.I., Adams B.L., Kunze K. Application of a new automatic lattice orientation measurement technique to polycrystalline aluminum. Materials Science and Engineering A 1993, 160(2):229-240.
130. Wu X., Kalidindi S.R., Necker C., Salem A.A. Prediction of crystallographic texture evolution and anisotropic stress-strain curves during large plastic strains in high purity [alpha]-titanium using a Taylor-type crystal plasticity model. Acta Materialia 2007, 55(2):423-432.
131. Wu X., Proust G., Knezevic M., Kalidindi S.R. Elastic-plastic property closures for hexagonal close-packed polycrystalline metals using first-order bounding theories. Acta Materialia 2007, 55(8):2729-2737.
132. Xu L.M., Fan H., Xie X.M., Li C. Effective elastic property estimation for bi-continuous heterogeneous solids. Computers, Materials and Continua 2008, 7(3):119-127.