Wear-resistant ceramic films and coatings

Comprehensive Biomaterials

Volumn 1, Issue , 2011, Pages 127-155

  Gotman, I ^a   Gutmanas, E Y ^a   Hunter, G ^b  

^a TECHNION ISRAEL INSTITUTE OF TECHNOLOGY   (Israel)

^b Smith and Nephew Research Centre   (United Kingdom)

Author keywords

Bearing surfaces; Diamond like carbon; Hard films; Joint replacements; Oxidized zirconium; Titanium nitride; Tribological performance; Wear simulation tests

Indexed keywords

CERAMIC FILM; FILMS AND COATINGS; WEAR-RESISTANT CERAMICS;

WEAR RESISTANCE;

EID: 84901323823     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (200)

1. Dowson, D.; Taheri, S.; Wallbridge, N. C. Wear I'm, 119, 277-293.
2. Fisher, J.; Firkins, P.; Reeves, E. A.; Hailey, J. L.; Isaac, G. H. Proc. Inst. Mech. Eng. H 1995, 209, 263-264.
3. Levesgue, M.; Livingston, B. J.; Jones, W. M.; Spector, M. Trans. Orthop. Res. Soc. 1998,55, 247.
4. Que, L.; Topoleski, L. D. J. Biomed. Mater. Res. 2000,50, 322-330.
5. Davidson, J. A.; Poggie, R. A.; Mishra, A. K. Biomed. Mater. Eng. 1994, 4(3),213-229.
6. Jasty, M.; Bragdon, C. R.; Lee, Κ.; Hanson, A.; Harris, W. H. J. Bone Joint Surg. 1994, 76B, 73-77.
7. Hailey, J. L.; Ingham, E.; Stone, M.; Wroblewski, B. M.; Fisher, J. Proc. Inst. Mech. Eng. H1996,210, 3-10.
8. Dwyer, K. A.; Topoleski, L. D. T.; Bauk, D. J.; Nakielny, R.; Engh, G. A. Trans. Orthop. Res. Soc. 1993,18, 82.
9. Barrack, R. L.; Castro, F. P., Jr.; Szuszczewicz, E. S.; Schmalzried, T. P. Orthopedics 2002,55(12),1-6.
10. Sychterz, C. J.; Engh, A.; Swope, S. W.; McNulty, D. E.; Engh, C. A. Clin. Orthop. 1999,55, 223-234.
11. Hall, R. M.; Siney, P.; Unsworth, A.; Wroblewski, B. M. Med. Eng. Phys. 1997, 5(8),711-719.
12. Davidson, J. A. Clin. Orthop. 1993,294, 361-378.
13. Schmalzried, T. P.; Scott, D. L.; Zahiri, C. A:, et al. Trans. Orthop. Res. Soc. 1998, 55, 275.
14. Sychterz, C. J.; Moon, K. H.; Hashimoto, A. Y.; Terefenko, K. M.; Engh, C. A.; Bauer, T. W. J. Bone Joint Surg. 1996, 754,1193-1200.
15. Oonishi, H.; Takayaka, Y.; Clarke, I. C.; Jung, N. J. Long Term Eff. Med. Implants 1992,5,37-47.
16. Oonishi, H.; Kadoya, Y. J. Orthop. Sei. 2000,5, 223-228.
17. Wroblewski, B. M.; Siney, P. D.; Fleming, P. A. J. Bone Joint Surg. 1999,575(1),54-55.
18. Skinner, H. B. Clin. Orthop. 1999,369, 83-91.
19. Willmann, G. Clin. Orthop. 2000,575, 22-28.
20. Bal, B. S.; Garino, J.; Ries, M.; Oonishi, H. J. Knee Surg. 2007,55(4),261-270.
21. Dearnley, P. A. Proc. Inst. Mech. Eng. H1999,575,107-135.
22. Willmann, G. Adv. Eng. Mater. 2000,5(3),114-122.
23. Savarino, L.; Greco, M.; Cenni, E.; et al. J. Bone Joint Surg. Br. 2006, 555, 472-476.
24. Greenwald, S.; Garino, J. J. Bone Joint Surg. 2001, 554(Suppl. 2, Part 2), 68-72.
25. Fenske, G. R. In Friction, Lubrication, and Wear Technology, ASM Handbook; ASM International: Materials Park, OH, 1992; Vol. 18, pp 850-860.
26. Maruyama, M.; Capello, W. N.; Dantonio, J. A.; Jaffe, W. L.; Bierbaum, B. E. din. Orthop. 2000,575,183-191.
27. Sioshansi, P.; Tobin, E. J. Surgicallmplants and Method. U.S. Patent 5,123,924, 1992.
28. Mahan, J. E. Physical Vapor Deposition of Thin Films; Wiley: New York, 2000.
29. Sree Harsha, K. S. Principles of Physical Vapor Deposition of Thin Films; Elsevier: Oxford, 2006.
30. Brown, I. Ann. Rev. Mater. Sci. 1998,28, 243-269.
31. Kelly, P. J.; Arnell, R. D. Vacuum 2000,56,159-172.
32. O'Brien, J. M.; Goodman, D. In Heat Treating, ASM Handbook; ASM International: Materials Park, OH, 1996; Vol. 4, pp 420-424.
33. Michel, H.; Czerwiec, T.; Gantois, M.; Ablitzer, D.; Ricard, A. Surf. Coat. Technol. 1995, 72, 103-111.
34. Czerwiec, T.; Renevier, N.; Michel, H. Surf. Coat. Technol. 2000,131, 267-277.
35. Shenhar, A.; Gotman, I.; Gutmanas, E. Y.; Ducheyne, P. Mater. Sci. Eng. A 1999, 268, 40-46.
36. Davidson, J. A.; Asgian, C. M.; Mishra, A. K.; Kovacs, P. In Bioceramics; 1992; Vol. 5, pp 389-401.
37. Hunter, G.; Dickinson, J.; Herb, B.; Graham, R. In Titanium, Niobium, Zirconium, and Tantalum for Medical and Surgical Applications, ASTM STP 1471; Zardiackas, L. D., Kraay, M. J., Freese, H. L., Eds.; American Society for Testing and Materials: West Conshohocken, PA, 2006; pp 16-29.
38. Hunter, G.; Jones, W. M.; Spector, M. In Total Knee Arthroplasty, Bellemans, J., Ries, M. D., Victor, J., Eds.; Springer: Heidelberg, Germany, 2005; pp 370-377.
39. Sheth, N. P.; Lementowski, P.; Hunter, G.; Garino, J. P. J. Surg. Orthop. Adv. 2008, 17(1),17-26.
40. Hobbs, L. W.; Rosen, V. B.; Mangin, S. P.; Treska, M.; Hunter, G. J.Appl. Ceram. Technol. 2005,2(3),221-246.
41. Benezra, V.; Mangin, S.; Treska, M.; Spector, M.; Hunter, G.; Hobbs, L. W. In Biomedical Materials, MRS Symposium Proceedings; Neenan, T., Marcolongo, M., Valentini, R. F., Eds.; Materials Research Society: Warrendale, PA, 1999; Vol. 550, pp 337-342.
42. Schemel, J. H. ASTM Manual on Zirconium and Hafnium, ASTM STP 639; ASTM International: West Conshohocken, PA, 1977.
43. Kovacs, P.; Davidson, J. A. In Medical Applications of Titanium and Its Alloys, ASTM STP 1272; Brown, S. A., Lemons, J. E., Eds.; American Society for Testing and Materials: West Conshohocken, PA, 1996; pp 163-178.
44. Haygarth, J. C.; Graham, R. A. In Review of Extraction, Processing, Properties & Applications of Reactive Metals; Mishra, B., Ed.; The Minerals, Metals & Materials Society: Warrendale, PA, 2001; pp 1-72.
45. Blumenthal, W. B. J. Sci. Ind. Res. 1976,35(7),485-490.
46. Sprague, J.; Aldinger, P.; Tsai, S.; Hunter, G.; Thomas, R.; Salehi, A. In ISTA 2003; Brown, S., Clarke, I. C., Gustafson, A., Eds.; International Society for Technology in Arthroplasty: Birmingham, AL, 2004; Vol. 2, pp 31-36.
47. Tsai, S.; Sprague, J.; Hunter, G.; Thomas, R.; Salehi, A. Trans. Soc. Biomater. 2001,24, 163.
48. Poggie, R. A.; Wert, J. J.; Mishra, A. K.; Davidson, J. A. In Wear and Friction of Elastomers, ASTM STP 1145; Denton, R., Keshavan, M. K., Eds.; American Society for Testing and Materials: Philadelphia, PA, 1992; pp 65-81.
49. Walker, P. S.; Blunn, G. W.; Lilley, P. A. J. Biomed. Mater. Res. 1996,33(3),159-175.
50. Galetz, M. C.; Seiferth, S. H.; Theile, B.; Glatzel, U. J. Biomed. Mater. Res.BAppl. Biomater. 2010,93(2),468-475.
51. Salehi, A.; Tsai, S.; Pawar, V. et al. In Bioceramics; Nakamura, T., Yamashita, K., Neo, M., Eds.; Trans Tech Publication: Uetikon-Zuerich, Switzerland, 2006; Vol. 18, pp 1199-1202; Key Eng Mater. 309-311.
52. Salehi, A.; Aldinger, P.; Sprague, J. et al. In Medical Device Materials; Shrivatstava, S., Ed.; ASM International: Materials Park, OH, 2004; pp 98-102.
53. Mazzucco, D.; Spector, M. Clin. Orthop. 2004,429,17-32.
54. Patel, A. M.; Spector, M. Biomaterials 1997,18(5),441-447.
55. Suire, R.; Malet, C.; Speri, R. J.; Bermard, C. U.S. Pat. 4,790,851,1988.
56. Türkan, U.; Öztürk, O.; Eroǧlu, A. E. Surf. Coat. Technol. 2006,200,5020-5027.
57. Fisher, J.; Hu, X. Q.; Stewart, T. D.; et al. J. Mater. Sci. Mater. Med. 2004, 15, 225-235.
58. Liu, C.; Bi, Q.; Matthews, A. Surf. Coat. Technol. 2003,163-164, 597-604.
59. Gerth, J.; Wiklund, U. Wear 2008,264, 885-892.
60. Sun, Y.; Bloyce, A.; Bell, T. Thin Solid Films 1995,271,122-131.
61. Buechel, F. F., Sr.; Buechel, F. F.; Helbig, T. E.; D'Alessio, J.; Pappas, M. J. J. Arthroplasty 2004, 19,1017-1027.
62. Buechel, F. F., Sr.; Buechel, F. F., Jr.; Pappas, M. J. Foot Ankle Int. 2003,24(6),462-472.
63. Saxler, G.; Temmen, D.; Bontemps, G. Knee 2004, 11, 349-355.
64. Raimondi, M. T.; Pietrabissa, R. Biomaterials 2000,21, 907-913.
65. Harman, M. K.; Banks, S. A.; Hodge, W. A. J. Arthroplasty 1997, 12, 938-945.
66. Massoud, S. N.; Hunter, J. B.; Holdsworth, B. J.; Wallace, W. A.; Juliusson, R. J. Bone Joint Surg. Br. 1997, 79, 603-608.
67. Ward, L. P.; Subramanian, C.; Strafford, K. N.; Wilks, T. P. Proc. Inst. Mech. Eng.H 1998,212, 303-315.
68. Williams, S.; Tipper, J. L.; Ingham, E.; Stone, M. H.; Fisher, J. Proc. Inst. Mech. Eng. H 2003,217,155-163.
69. Wiklund, U.; Gunnars, J.; Hogmark, S. Wear 1999,232, 262-269.
70. Komotori, J.; Lee, B. J.; Dong, H.; Dearnley, P. A. Wear 2001,251,1239-1249.
71. Lappalainen, R.; Santavirta, S. S. Clin. Orthop. Relat. Res. 2005,430, 72-79.
72. Bolton, J.; Hu, X. J. Mater. Sci. Mater. Med. 2002, 13, 567-574.
73. Nolan, D.; Huang, S. W.; Leskovsek, V.; Braun, S. Surf. Coat. Technol. 2006,200, 5698-5705.
74. Willmann, G. Adv. Eng. Mater. 2001,3(3),135-141.
75. Venugopalan, R.; George, M. A.; Weimer, J. J.; Lucas, L. C. Biomaterials 1999, 20, 1709-1716.
76. Dearnley, P. A. Surf. Coat. Technol. 2005,198, 483-490.
77. Wilson, A. D.; Leyland, A.; Matthews, A. Surf. Coat. Technol. 1999,114, 70-80.
78. Wei, R.; Booker, T.; Rincon, C.; Arps, J. Surf. Coat. Technol. 2004,186, 305-313.
79. Rahaman, M. N.; Yao, A. J.Am. Ceram. Soc. 2007, 90(7),1965-1988.
80. Zhecheva, A.; Sha, W.; Malinov, S.; Long, A. Surf. Coat. Technol. 2005,200, 2192-2207.
81. Fouquet, V.; Pichon, L.; Drouet, M.; Straboni, A. Appl. Surf. Sci. 2004,221, 248-258.
82. Lanning, B. R.; Wei, R. Surf. Coat. Technol. 2004, 186, 314-319.
83. Fouquet, V.; Pichon, L.; Straboni, A.; Drouet, M. Surf. Coat. Technol. 2004,186, 34-39.
84. Raaif, M.; El-Hossary, F. M.; Negm, N. Z.; Khalil, S. M.; Schaaf, P. J. Phys. Condens. Matter 2007, 19,1-12.
85. Taktak, S.; Akbulut, H. Vacuum 2004, 75, 247-259.
86. Avelar-Batista, J. C.; Spain, E.; Housden, J.; Matthews, A.; Fuentes, G. G. Surf. Coat. Technol. 2005,200,1954-1961.
87. Shenhar, A.; Gotman, I.; Radin, S.; Ducheyne, P. Ceram. Int. 2000,26, 709-713.
88. Shenhar, A.; Gotman, I.; Radin, S.; Ducheyne, P.; Gutmanas, E. Y. Surf. Coat. Technol. 2000,126, 210-218.
89. Chase, M. W. J. NIST-JANAF Thermochemical Tables, 4th ed.; American ChemicalSociety: Woodbury, NY, 1998.
90. Meletis, E. I.; Erdemir, A.; Fenske, G. R. Surf. Coat. Technol. 1995, 73, 39-45.
91. Casadei, F.; Pileggi, R.; Valle, R.; Matthews, A. Surf. Coat. Technol. 2006,201, 1200-1206.
92. Dong, H. In Heat Treating Including Advances in Surface Engineering, An International Symposium in Honor of Professor Tom Bell and Professor Jerome B. Cohen Memorial Symposium on Residual Stresses in the Heat Treatment Industry Proceedings of the 20th Conference; Funatani, K., Totten, G. E., Eds.; 2001; Vol. 1, pp 170-176.
93. Rie, K.-T.; Stucky, T.; Silva, R. A.; et al. Surf. Coat. Technol. 1995, 74-75, 973-980.
94. Ma, S.; Xu, K.; Jie, W. Surf. Coat. Technol. 2004, 185, 205-209.
95. Cassara, G.; Avelar-Batista Wilson, J. C.; Banfield, S.; Housden, J.; Matthews, A.; Leyland, A. Wear 2010,269, 60-70.
96. Hauert, R. Tribol. Int. 2004,37, 991-1003.
97. Grill, A. Diam. Relat. Mater. 2003,12,166-170.
98. Hauert, R. Diam. Relat. Mater. 2003,12, 583-589.
99. Dearnaley, G.; Arps, J. H. Surf. Coat. Technol. 2005,200, 2518-2524.
100. Roy, R. K.; Lee, K. R. J. Biomed. Mater. Res. Appl. Biomater. 2007, 83B, 72-84.
101. Robertson, J. Mater. Sci. Eng. 2002, R37, 129-281.
102. Erdemir, A.; Donnet, C. J. Phys. D Appl. Phys. 2006, 39, R311-R327.
103. Park, S. J.; Lee, K.-R.; Ahn, S.-H.; Kim, J.-G. Diam. Relat. Mater. 2008, 17, 247-251.
104. Manhabosco, T. M.; Müller, I. L. Tribol. Lett. 2009,33,193-197.
105. Yatsuzuka, M.; Tateiwa, J.; Uchida, H. Vacuum 2006,80,1351-1355.
106. Xu, T.; Pruitt, L. J. Mater. Sci. Mater. Med. 1999,10, 83-90.
107. Shtansky, D. V.; Lyasotsky, I. V.; D'yakonova, N. B.; et al. Surf. Coat. Technol. 2004, 182, 204-214.
108. Levashov, E. A.; Larikhin, D. V.; Shtansky, D. V.; et al. J. Mater. Synth. Process. 2002, 10, 319-330.
109. Shtansky, D. V.; Levashov, E. A.; Sheveiko, A. N.; Moore, J. J. Metall. Mater. Trans. 1999,30A, 2439-2447.
110. Shtansky, D. V.; Levashov, E. A.; Sheveiko, A. N.; Moore, J. J. J. Mater. Synth. Process. 1999, 7,187-193.
111. Shtansky, D. V.; Levashov, E. A.; Sheveiko, A. N.; Moore, J. J. J. Mater. Synth. Process. 1998, 6, 61-72.
112. Levashov, E. A.; Kudryashov, A. E.; Vakaev, P. V.; et al. Surf. Coat. Technol. 2004, 180-181, 347-351.
113. Kulisch, W.; Colpo, P.; Gibson, P. N.; et al. Surf. Coat. Technol. 2004,188-189, 735-740.
114. Kulisch, W.; Colpo, P.; Rossi, F.; Shtansky, D. V.; Levashov, E. A. Surf. Coat. Technol. 2004,188-189, 714-720.
115. Kulisch, W.; Colpo, P.; Gibson, P. N. et al.J.Appl. Phys. A 2006,82, 503-507.
116. Shtansky, D. V.; Kaneko, K.; Ikuhara, Y.; Levashov, E. A. Surf. Coat. Technol. 2001, 148, 206-215.
117. Shtansky, D. V.; Gloushankova, N. A.; Sheveiko, A. N.; et al. Biomaterials 2005, 26, 2909-2924.
118. Shtansky, D. V.; Bashkova, I. A.; Levashov, E. A.; et al. Dokl. Biochem. Biophys. 2005, 404, 336-338.
119. Shtansky, D. V.; Gloushankova, N. A.; Bashkova, I. A.; et al. Surf. Coat. Technol. 2006,201,4111-4118.
120. Shtansky, D. V.; Gloushankova, N. A.; Bashkova, I. A.; et al. Biomaterials 2006, 27,3519-3531.
121. Shtansky, D. V.; Bashkova, I. A.; Kiryukhantsev-Korneev, Ph.V.; et al. Dokl. Biochem. Biophys. 2008,418, 8-10.
122. Shtansky, D. V.; Gloushankova, N. A.; Bashkova, I. A.; et al. Surf. Coat. Technol. 2008,202, 3615-3624.
123. Long, M.; Riester, L.; Hunter, G. Trans. Soc. Biomater. 1998,21, 528.
124. Mishra, A. K.; Davidson, J. A. Mater. Technol. 1993,8(1/2), 16-21.
125. Hunter, G.; Long, M. In Sixth World Biomaterials Congress Transactions; Society for Biomaterials: Minneapolis, MN, 2000; Vol. 835.
126. Hunter, G.; Pawar, V.; Salehi, A.; Long, M. In Medical Device Materials; Shrivatsava, S., Ed.; ASM International: Materials Park, OH, 2004; Vol. 1, pp 91-97.
127. Alakoski, E.; Tiainen, V.; Soininen, A.; Konttinen, Y. T. Open Orthop. J. 2008,2, 43-50.
128. Hunter, G. Trans. Soc. Biomater. 2001,24, 540.
129. Marek, M.; Pawar, V.; Tsai, S.; et al. In Medical Device Materials; Venugopalan, R., Wu, M., Eds.; ASM International: Materials Park, OH, 2006; Vol. 3, pp 195-201.
130. Pawar, V.; Jones, B.; Sprague, J.; Salehi, A.; Hunter, G. In: Medical Device Materials; Helmus, M., Medlin, D., Eds.; ASM International: Materials Park, OH, 2005; Vol. 2, pp 403-408.
131. Tsai, S.; Heuer, D.; Pawar, V.; Salehi, A. Trans. Soc. Biomater. 2005,28, 85.
132. Bhambri, S. K.; Gilberston, L. N. In Modularity of Orthopedic Implants, ASTM STP 1301; Marlowe, D. E., Parr, J. E., Mayor, M. B., Eds.; American Society for Testing and Materials: West Conshohocken PA, 1997; pp 146-156.
133. White, S. E.; Whiteside, L. A.; McCarthy, D. S.; Anthony, M.; Poggie, R. A. Clin. Orthop. 1994,309,176-184.
134. Spector, M.; Ries, M. D.; Bourne, R. B.; Sauer, W. S.; Long, M.; Hunter, G. J.Bone Joint Surg. 2001,83A (S2), 80-86.
135. Hermida, J. C.; Patil, S.; D'Lima, D. D.; Colwell, C. W., Jr.; Ezzet, K. A. Am.Acad. Orthop. Surg. Ann. Mtg. Proc. 2004,5, 449.
136. Good, V.; Ries, M.; Barrack, R. L.; Widding, K.; Hunter, G.; Heuer, D. J. Bone Joint Surg. 2003, 85A(S4), 105-110.
137. Ries, M. D.; Salehi, A.; Widding, K.; Hunter, G. J. Bone Joint Surg. 2002, 84A (S2), 129-135.
138. DesJardins, J. D.; LaBerge, M. Trans. Soc. Biomater. 2003,26, 364.
139. Lee, J. K. L.; Maruthainar, K.; Wardle, N.; Haddad, F.; Blunn, G. W. Knee 2009, 16, 269-274.
140. DesJardins, J. D.; Burnikel, B.; LaBerge, M. Wear 2008,264, 245-256.
141. Alberts, L. R.; Neff, J. R.; Webb, J. D. Trans. Orthop. Res. Soc. 2001, 26, 1101.
142. Oonishi, H.; Hanatate, Y.; Tsuji, E.; Yunoki, H. In Bioceramics; Oonishi, H., Aoki, H., Sawai, K., Eds.; Ishiyaku EuroAmerica: Tokyo, 1989; Vol. 1, pp 219-224.
143. Vittetoe, D. A.; Rubash, H. E. Semin. Arthroplasty 2002, 13(4),344-349.
144. Clarke, I. C.; Green, D. D.; Williams, P. A.; et al. In Transactions of the Seventh World Biomaterials Congress; Australian Society for Biomaterials: Victoria, Australia, 2004; p 1138.
145. Bourne, R. B.; Barrack, R.; Rorabeck, C. H.; et al. Clin. Orthop. Relat. Res. 2005, 441,159-167.
146. Lee, R.; Essner, A.; Wang, A.; Jaffe, W. L. Wear 2009,267,1915-1921.
147. Pappas, M. J.; Makris, G.; Buechel, F. F. Trans. Biomater. 1990, 13, 36.
148. Pappas, M. J.; Makris, G.; Buechel, F. F. Clin. Orthop. 1995,317, 64-70.
149. Galvin, A.; Brockett, C.; Williams, S.; et al. Proc. IMechEHJ. Eng. Med. 2008, 222,1073-1080.
150. Fisher, J.; Hu, X. Q.; Tipper, J. L.; et al. Proc. IMechEJ. Eng. Med. 2002,216, 219-230.
151. Oñate, J. I.; Comin, M.; Braceras, I.; et al. Surf. Coat. Technol. 2001, 142-144, 1056-1062.
152. Haider, H.; Weisenburger, J.; Garvin, K. In Presented at 2010 Annual Meeting of American Academy of Orthopaedic Surgeons, New Orleans, Louisiana, Mar 9-13, 2010.
153. Bell, C. J.; Fisher, J. J. Biomed. Mater. Res. Appl. Biomater. 2007, 81B, 162-167.
154. Saikko, V.; Ahlroos, T.; Calonius, O.; Keränen, J. Biomaterials 2001,22, 1507-1514.
155. Dowling, D. P.; Kola, P. V.; Donnelly, K.; et al. Diam. Relat. Mater. 1997, 6, 390-393.
156. Dorner-Reisel, A.; Schärer, C.; Mäller, E. Diam. Relat. Mater. 2004, 13, 823-827.
157. Osterle, W.; Djahanbakhsh, M.; Hartelt, M.; Wäsche, R. Wear 2008,265, 1727-1733.
158. Thorwarth, G.; Falub, C. V.; Mäller, U.; et al. Acta Biomater. 2010, 6, 2335-2341.
159. Lappalainen, R.; Selenius, M.; Anttila, A.; Konttinen, Y. T.; Santavirta, S. S. J. Biomed. Mater. Res. Appl. Biomater. 2003,66B, 410-413.
160. Gutmanas, E. Y.; Gotman, I. J. Mater. Sci. Mater. Med. 2004, 15, 327-330.
161. Leslie, I. J.; Williams, S.; Brown, C.; et al. J. Biomed. Mater. Res. Appl. Biomater. 2009,90B, 558-565.
162. Powers, D. L.; Claassen, B.; Black, J. J. Invest. Surg. 1995, 8(5),349-362.
163. Kuo, T. Y.; Skedros, J. G.; Bloebaum, D. J. Biomed. Mater. Res. 1998, 40, 475-489.
164. Skurla, C. P.; James, S. P. J. Biomed. Mater. Res. Appl. Biomater. 2005, 73B, 260-270.
165. Allen, M.; Myer, B.; Rushton, N. J.Biomed.Mater. Res.Appl. Biomater. 2001,58, 319-328.
166. Hayashi, K.; Matsuguchi, N.; Uenoyama, K.; Kanemaru, T.; Sugioka, Y. J. Biomed. Mater. Res. 1989,23,1247-1259.
167. Scarano, A.; Piattelli, M.; Vrespa, G.; Petrone, G.; Iezzi, G.; Piattelli, A. Clin. Implant Dent. Relat. Res. 2003,5,103-111.
168. Sovak, G.; Weiss, A.; Gotman, I. J. Bone Joint Surg. [Br] 2000, 82B, 290-296.
169. Gotman, I.; Fuchs, D.; Onalla, J.; et al. In Book of Abstracts of the 19th European Conference on Biomaterials, European Society for Biomaterials, Sorrento, Italy, Sept 11-15, 2005, T183.
170. Gotman, I.; Fuchs, D.; Gutmanas, E. Y. In Book of Abstracts of the 19th European Conference on Biomaterials, European Society for Biomaterials, Sorrento, Italy, Sept 11-15, 2005, P 404.
171. McGrory, B. J.; Ruterbories, J.; Pawar, V.; Thomas, R.; Salehi, A. Am. Acad. Orthop. Surg. Ann. Mtg. Proc. 2005, 6, 379.
172. Buechel, F. F., Sr.; Buechel, F. F., Jr.; Pappas, M. J. Clin. Orthop. 2004,424, 19-26.
173. Taeger, G.; Podleska, L. E.; Schmidt, B.; Ziegler, M.; Nast-Kolb, D. Materwiss. Werksttech. 2003,34(12),1094-1100.
174. Joyce, T. J. Wear 2007,263,1050-1054.
175. Laskin, R. S. Tech. Knee Surg. 2007,6(4),220-226.
176. Nava, W. A. Informe Medico. 2005, 7(11),517-520.
177. Masonis, J. L.; Kuremsky, M.; Odum, S. M.; Springer, B. D.Am.Acad. Orthop. Surg. Ann. Mtg. Proc. 2008, 9, 481.
178. Karachalios, Th.; Giotikas, D.; Roidis, N.; Poultsides, L.; Bargiotas, K.; Malizos, K. N. J. Bone Joint Surg. 2008, 90B(5), 584-591.
179. Innocenti, M.; Civinini, R.; Carulli, C.; Matassi, F.; Villano, M. Clin. Orthop. 2010, 468, 1258-1263.
180. Kim, Y. H.; Kim, J. S.; Huh, W.; Lee, K. H. Clin. Orthop. 2010,468(5),1296-1304.
181. Sah, A. P.; Ready, J. E. J. Arthroplasty 2007,22(8),1174-1180.
182. Lewis, P. M.; Moore, C. A.; Olsen, M.; Schemitsch, E. H.; Waddell, J. P. Orthopedics 2008,31(12S), 109-112.
183. Garvin, K. L.; Hartman, C. W.; Mangla, J.; Murdoch, N.; Martell, J. M. Clin. Orthop. 2009,467(1),141-145.
184. Haddad, F. S.; Tahmassebi, J.; Fernandez, J. A. S.; Wardle, N. S.; Hossein, F. S.; Patel, S. Am. Acad. Orthop. Surg. Ann. Mtg. Proc. 2010, 11, P067.
185. Li, M.G.; Zhou, Z. K.; Wood, D. J.; Rohrl, S. M.; Ioppolo, J. L.; Nivbrant, B. Trans. Orthop. Res. Soc. 2006,31, 643.
186. Heyse, T. J.; Davis, J.; Haas, S. B.; Chen, D. X.; Wright, T. M.; Laskin, R. S. J. Arthroplasty 2010, on-line: doi:10.1016/j.arth.2009.11.024.
187. Sebastian, A. M.; Roy, M. E.; Whiteside, L. A.; Azzam, M. G. Trans. Orthop. Res. Soc. 2008,33, 1778.
188. Pritchett, J. W. Clin. Orthop. 2006,442,195-198.
189. Kop, A. M.; Whitewood, C.; Johnston, D. J. J. Arthroplasty 2007,22, 775-779.
190. Evangelista, G. T.; Fulkerson, E.; Kummer, F.; Di Cesare, P. E. J. Bone Joint Surg. 2007, 89, 535-537.
191. Wright, T.; Danoff, J.; Bostrom, M.; Pellicci, P. Trans. Orthop. Res. Soc. 2008, 33,1899.
192. Mai, K.; Verioti, C.; D'Lima, D. D.; Colwell, C. W., Jr.; Ezzet, K. A. Am. Acad. Orthop. Surg. Mtg. Proc. 2009, 10, 471.
193. Sakona, A. S.; MacDonald, D. W.; Sharma, P.; Medel, F.; Kurtz, S. M. Trans. Orthop. Res. Soc. 2010,35, 2358A.
194. Jaffe, W. L.; Strauss, E. J.; Cardinale, M.; Herrera, L.; Kummer, F. J. J. Arthroplasty 2009, 24(6),898-902.
195. Bragdon, C. R.; Wannomae, K. K.; Lozynsky, A.; Micheli, B.; Malchau, H. Trans. Orthop. Res. Soc. 2009,34, 2337.
196. Nasser, S. In Total Knee Arthroplasty; Bellemans, J., Ries, M. D., Victor, J., Eds.; Springer Verlag: Heidelberg, Germany, 2005; pp 343-353.
197. Nasser, S.; Mott, M. P.; Wooley, P. H. Am. Acad. Orthop. Surg. Ann. Mtg. Proc. 2007, 8, 437.
198. Lee, K. Y.; Slavinsky, J. P.; Ries, M. D.; Blimenkrantz, G.; Majumdar, S. J.Magn. Reson. Imaging 2005,21,172-178.
199. Raphael, B.; Haims, A. H.; Wu, J. S.; Katz, L. D.; White, L. M.; Lynch, K. Am. J. Roentgenol. 2006, 186(6),1771-1777.
200. Goldberg, J. R.; Gilbert, J. L. J. Biomed. Mater. Res. B Appl. Biomater. 2002, 64(2),78-93.