Comparison of wear of ultra-high molecular weight polyethylene acetabular cups against surface-engineered femoral heads

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine

Volumn 222, Issue 7, 2008, Pages 1073-1080

  Galvin, A ^a   Brockett, C ^a   Williams, S ^a   Hatto, P ^b   Burton, A ^c   Isaac, G ^a,c   Stone, M ^a   Ingham, E ^a   Fisher, J ^a  

^a UNIVERSITY OF LEEDS   (United Kingdom)

^b No 1 Industrial Estate   (United Kingdom)

^c Synthes Technical Center   (United Kingdom)

Author keywords

hip prosthesis; polyethylene wear; surface engineered femoral heads

Indexed keywords

ACETABULAR CUP; ALUMINA CERAMIC; ARTIFICIAL HIP JOINT; CHEMICAL VAPOUR DEPOSITION; CHROMIUM NITRIDE; DIAMOND-LIKE CARBON; FEMORAL HEADS; FRICTION AND WEAR; FRICTION FACTORS; HIP JOINT SIMULATORS; PHYSICAL VAPOUR DEPOSITION; POLYETHYLENE WEAR; REACTIVE GAS; SURFACE PARAMETER; UHMW-PE; UHMWPE ACETABULAR CUPS; WEAR VOLUME; DIAMOND LIKE CARBON;

AMORPHOUS CARBON; CERAMIC MATERIALS; CHROMIUM; COATINGS; COBALT; FRICTION; HIP PROSTHESES; MOLECULAR WEIGHT; NONMETALLIC MATRIX COMPOSITES; PLASMA DEPOSITION; PROSTHETICS; SIMULATORS; SURFACE TOPOGRAPHY; THERMOPLASTICS; TITANIUM; TITANIUM NITRIDE; TRIBOLOGY; ALUMINA; CARBON; CHEMICAL VAPOR DEPOSITION; DEPOSITION; NITRIDES; PHYSICAL VAPOR DEPOSITION; ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES;

POLYETHYLENES;

POLYETHYLENE DERIVATIVE; ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE; ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE; UNCLASSIFIED DRUG;

ACETABULUM; ARTICLE; CHEMISTRY; COMPARATIVE STUDY; EQUIPMENT; EVALUATION; FEMUR HEAD; HIP PROSTHESIS; HUMAN; MATERIALS TESTING; PROSTHESIS FAILURE; SURFACE PROPERTY;

ACETABULUM; EQUIPMENT FAILURE ANALYSIS; FEMUR HEAD; HIP PROSTHESIS; HUMANS; MATERIALS TESTING; POLYETHYLENES; PROSTHESIS FAILURE; SURFACE PROPERTIES;

EID: 58149291643     PISSN: 09544119     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544119JEIM407     Document Type: Article

References (26)

1. Malchau, H., Herberts, P., Eisler, T., Garellick, G., and Soderman, P. The Swedish total hip replacement register. J. Bone Jt Surg. Am., 2002, 84, 2-20.
2. Ingham, E. and Fisher, J. Biological reactions to wear debris in total joint replacement. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2000, 214(H1), 21-37.
3. Endo, M., Tipper, J. L., Barton, D. C., Stone, M. H., Ingham, E., and Fisher, J. Comparison of wear, wear debris and functional biological activity of moderately crosslinked and non-crosslinked polyethylenes in hip prostheses. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2002, 216(H2), 111-122.
4. McKellop, H., Shen, F. W., DiMaio, W., and Lancaster, J. G. Wear of gamma-crosslinked polyethylene acetabular cups against roughened femoral balls. Clin. Orthop. Related Res., 1999, 369, 73-82.
5. Muratoglu, O. K., Bragdon, C. R., O'Connor, D. O., Skehan, H. J. D., Jasty, M., and Harris, W. H. The comparison of the wear behaviour of four different types of crosslinked acetabular components. In Transactions of the 46th Annual Meeting of the Orthopaedic Research Society, 2000, p. 566.
6. Williams, S., Butterfield, M., Stewart, T., Ingham, E., Stone, M., and Fisher, J. Wear and deformation of ceramic-on-polyethylene total hip replacements with joint laxity and swing phase microseparation. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2003, 217(H2), 147-153.
7. Tipper, J. L., Ingham, E., Hailey, J. L., Besong, A. A., Fisher, J., Wroblewski, B. M., and Stone, M. H. Quantitative analysis of polyethylene wear debris, wear rate and head damage in retrieved Charnley hip prostheses. J. Mater. Sci. Mater. Med., 1999, 11(2), 117-124.
8. Jasty, M., Bragdon, C. R., Lee, K., Hanson, A., and Harris, W. H. Surface damage to cobalt-chrome femoral-head prostheses. J. Bone Jt Surg. Br., 1994, 76(1), 73-77. (Pubitemid 24029262)
9. Minakawa, H., Stone, M. H., Wroblewski, B. M., Lancaster, J. G., Ingham, E., and Fisher, J. Quantification of third-body damage and its effect on UHMWPE wear with different types of femoral head. J. Bone Jt Surg. Br., 1998, 80(5), 894-899.
10. Derbyshire, B., Fisher, J., Dowson, D., Hardaker, C. S., and Brummitt, K. Wear of UHMWPE sliding against untreated, titanium nitride-coated and hardcor-treated stainless-steel counterfaces. Wear, 1995, 181, 258-262.
11. Affatato, S., Frigo, M., and Toni, A. An in vitro investigation of diamond-like carbon as a femoral head coating. J. Biomed. Mater. Res., 2000, 53(3), 221-226.
12. Jones, V. C., Barton, D. C., Auger, D. D., Hardaker, C., Stone, M. H., and Fisher, J. Simulation of tibial counterface wear in mobile bearing knees with uncoated and ADLC coated surfaces. Bio-Med. Mater. Engng, 2001, 11(2), 105-115.
13. Taeger, G., Podleska, L. E., Schmidt, B., Ziegler, M., and Nast-Kolb, D. Comparison of diamondlike- carbon and alumina-oxide articulating with polyethylene in total hip arthroplasty. Matt.-wiss. u. Werkstofftech, 2003, 34(12), 1094-1100.
14. Good, V., Ries, M., Barrack, R. L., Widding, K., Hunter, G., and Heuer, D. Reduced wear with oxidized zirconium femoral heads. J. Bone Jt Surg. Am., 2003, 85(suppl 4), 105-110.
15. Lausmaa, J., Rostlund, T., and McKellop, H. A surface spectroscopic study of nitrogen ion-implanted Ti And Ti-6Al-4V wear against UHMWPE. Surf. Interface Analysis, 1990, 15(5), 328-336.
16. Rostlund, T., Albrektsson, B., Albrektsson, T., and McKellop, H. Wear of ion-implanted pure titanium against UHMWPE. Biomater., 1989, 10(3), 176-181.
17. Brockett, C., Williams, S., Jin, Z. M., Isaac, G., and Fisher, J. Friction of total hip replacements with different bearings and loading conditions. J. Biomed. Mater. Res. Part B: Appl. Biomater., 2007, 81B(2), 508-515.
18. Paul, J. P. Forces transmitted by joints in the human body. Proc. Instn Mech. Engrs, 1967, 181(3), 8-15.
19. Barbour, P. S. M., Stone, M. H., and Fisher, J. A hip joint simulator study using simplified loading and motion cycles generating physiological wear paths and rates. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1999, 213(H6), 455-467.
20. Derbyshire, B., Hardaker, C., Fisher, J., Dowson, D., and Brummitt, K. Assessment of the change in volume of acetabular cups using a coordinate measuring machine. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1994, 208, 151-158.
21. Goldsmith, A. A. J. and Dowson, D. A multi-station hip joint simulator study of the performance of 22mm diameter zirconia-ultra-high molecular weight polyethylene total replacement hip joints. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1999, 213(H2), 77-90.
22. Wroblewski, B. M., Siney, P. D., and Fleming, P. A. Low-friction arthroplasty of the hip using alumina ceramic and cross-linked polyethylene - a ten-year follow-up report. J. Bone Jt Surg. Br., 1999, 81(1), 54-55.
23. Oonishi, H., Takayaka, Y., Clarke, I. C., and Jung,H. Comparative wear studies of 28-mm ceramic and stainless-steel total hip joints over 2 to 7 year period. J. Long-Term EffectsMed. Implants, 1992, 2(1), 37-47.
24. Galvin, A. L., Williams, S., Hatto, P., Thompson, J., Isaac, G., Stone, M., Ingham, E., and Fisher, J. Comparison of wear of ultra high molecular weight polyethylene acetabular cups against alumina ceramic and chromium nitride coated femoral heads. Wear, 2005, 259, 972-976.
25. Good, V., Widding, K., Hunter, G., and Heuer, D. Oxidized zirconium: a potentially longer lasting hip implant. Mater. Des., 2005, 26(7), 618-622.
26. Bourne, R. B., Barrack, R., Rorabeck, C. H., Salehi, A., and Good, V. Arthroplasty options for the young patient. Clin. Orthop. Related Res., 2005, 441, 159-167.