Scratch and wear performance of prosthetic femoral head components against crosslinked UHMWPE sockets

Wear

Volumn 267, Issue 11, 2009, Pages 1915-1921

  Lee, R ^a   Essner, A ^a   Wang, A ^a   Jaffe, W L ^b  

^a STRYKER ORTHOPAEDICS   (United States)

^b NYU HOSPITAL FOR JOINT DISEASES   (United States)

Author keywords

Abrasion; Alumina; Ceramic; Hip; Wear

Indexed keywords

ABRASION RESISTANCE; ACETABULAR COMPONENTS; ALUMINA CERAMIC; BEARING WEAR; BULK CERAMICS; CONTRIBUTING FACTOR; CROSSLINKED; FEMORAL HEADS; HIP JOINTS; IMPLANT FAILURES; IN-VIVO; METALLIC SUBSTRATE; SOCKET JOINTS; THIN CERAMIC COATINGS; TOTAL HIP ARTHROPLASTY; UHMW-PE; WEAR PERFORMANCE; ZIRCONIA TOUGHENED ALUMINA;

ARTIFICIAL LIMBS; BEARINGS (STRUCTURAL); CERAMIC COATINGS; CERAMIC MATERIALS; CHROMIUM; COATED MATERIALS; COBALT; JOINT PROSTHESES; METALLIC COMPOUNDS; NIOBIUM; PROTECTIVE COATINGS; THERMOPLASTICS; TRIBOLOGY; ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES; WEAR RESISTANCE; ZIRCONIA; ZIRCONIUM;

ABRASION;

EID: 71749120608     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2009.03.034     Document Type: Article

References (26)

1. Schmalzried T.P., Jasty M., and Harris W.H. Periprosthetic bone loss in total hip arthroplasty: the role of polyethylene and the concept of the effective joint space. J. Bone Joint Surg. 74 (1992) 849-863
2. Amstutz H.Z., Campbell P., Kossovsky N., and Clarke I.C. Mechanisms and clinical significance of wear debris-induced osteolysis. Clin. Orthop. 276 (2001) 7-18
3. Brodner W., Grübl A., Jankovsky R., Meisinger V., Lehr S., and Gottsauner-Wolf F. Cup inclination and serum concentration of cobalt and chromium after metal-on-metal total hip arthroplasty. J. Arthroplasty 19 (December) 8 Suppl. 3 (2004) 66-70
4. Vassiliou K., Elfick A.P., Scholes S.C., and Unsworth A. The effect of 'running-in' on the tribology and surface morphology of metal-on-metal Birmingham hip resurfacing device in simulator studies. Proc. Inst. Mech. Eng. [H] 220 (February) 2 (2006) 269-277
5. Walter W., O'Toole G., Walter W., Ellis A., and Zicat B. Squeaking in ceramic-on-ceramic hips: the importance of acetabular component orientation. J. Arthroplasty 22 4 (2007) 496-503
6. Keurentjes J., Kuipers R., Wever D., and Schreurs B. High incidence of squeaking in THAs with alumina ceramic-on-ceramic bearings. Clin. Orthop. Relat. Res. 466 6 (June 2008)
7. Macdonald S., Mccalden R., Chess D., Bourne R., Rorabeck C., Cleland D., and Leung F. Metal-on-metal versus polyethylene in hip arthroplasty: a randomized clinical trial. Clin. Orthop. Relat. Res. 406 (2003)
8. Savarino L., Granchi D., Ciapetti G., Cenni E., Nardi Pantoli A., Rotini R., Veronesi C., Baldini N., and Guinti A. Ion release in patients with metal-on-metal hip bearings in total joint replacement: A comparison with metal-on-polyethylene bearings. J. Biomed. Mater. Res. B: Appl. Biomater. 63 5 (2002) 467-474
9. Wang A., Zeng H., Yau S.S., Essner A., Manley M., and Dumbleton J. Wear, oxidation and mechanical properties of a sequentially irradiated and annealed UHMWPE in total joint replacement. J. Phys. D: Appl. Phys. 39 (2006) 3213-3219
10. Dumbleton J.H., D'Antonio J.A., Manley M.T., Capello W., and Wang A. The basis for a second-generation highly cross-linked UHMWPE. Clin. Orthop. Relat. Res. 453 (2006) 265-271
11. Essner A., Wang A., Yau S.S., Manley M., Dumbleton J., and Serekian P. Sequential Irradiation and annealing provides a highly crosslinked UHMWPE for CR and PS total knee replacement. J. Bone Joint Surg. [Br] 88-B Suppl. I (2006)
12. Herrera L., Lee R., Longaray J., Essner A., and Wang A. Hip simulator evaluation of the effect of femoral head size on sequentially cross-linked acetabular liners. Wear 283 (2007) 1034-1037
13. Lee R., Cardinale M., Loving L., Herrera L., Essner A., Wang A., and Morris H. Hip simulator evaluation of roughened CoCr femoral heads on crosslinked PE. Trans. Orthop. Res. Soc. (2008) 1785
14. Lee R., Cardinale M., Loving L., Longaray J., Essner A., Wang A., and Ward D. Abrasion of ceramic femoral heads and its effects on PE wear (April 2008), EORS, Madrid, Spain
15. Elfick A., Hall R., Pinder I., and Unsworth A. The influence of femoral head surface roughness on the wear of ultra high molecular weight polyethylene sockets in cementless total hip replacement. J. Biomed. Mater. Res. 48 (1999) 712-718
16. Wang A., Sun D.C., Stark C., and Dumbleton J.H. Wear mechanisms of UHMWPE in total hip replacements. Wear 181-183 (1995) 241-249
17. Wang A., and Essner A. Three-body wear of UHMWPE acetabular cups by PMMA particles against CoCr, alumina and zirconia heads in a hip joint simulator. Wear 250 (2001) 212-216
18. Hall R.M., Unsworth A., Siney P., and Wroblewski B.M. The surface topography of retrieved femoral heads. J. Mat. Sci. Mat. Med. 7 (1996) 739-744
19. Jasty M., Bragdon C.R., Lee K., Hanson A., and Harris W.H. Surface damage to cobalt-chrome femoral head prostheses. J. Bone Joint Surg. 76B (1994) 73-77
20. Biolox delta-Nanocomposite for Arthroplasty, Scientific Information and Performance Data, MT080011, http://www.ceramtec.com.
21. http://www.strongasanox.com
22. Long M., Riester L., and Hunter G. Nano-hardness measurements of oxidized Zr-2.5Nb and various orthopaedic materials. Trans. Soc. Biomater. 21 (1998) 528
23. Herrera L., Cardinale M., Essner A., Racanelli J., Jaffe W., and Kummer F. Wear evaluation of the effect of head damage due to dislocation and reduction (2008), Trans. Orthop. Res. Soc. p. 1782
24. Kop A., Whitewood C., and Johnston D. Damage of oxinium femoral heads subsequent to hip arthroplasty dislocation three retrieval case studies. J. Arthroplasty 22 (2007) 775-779
25. Wang A., Essner A., and Schmidig G. The effects of lubricant composition on in vitro wear testing of polymeric acetabular components. J. Biomed. Mater. Res. B: Appl. Biomater. 68B 1 (2004) 45-52
26. Good V., Ries M., Barrack R., Widding K., Hunter G., and Heuer D. Reduced wear with oxidized zirconium femoral heads. J. Bone Joint Surg. (Am) 85 (2003) 105-110