The role of dynamic measurements in correlating structure with optoelectronic properties in polymer : Fullerene bulk-heterojunction solar cells

Reports on Progress in Physics

Volumn 76, Issue 2, 2013, Pages

  Pearson, Andrew J ^a   Wang, Tao ^a   Lidzey, David G ^a  

^a UNIVERSITY OF SHEFFIELD   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84873885323     PISSN: 00344885     EISSN: None     Source Type: Journal    
DOI: 10.1088/0034-4885/76/2/022501     Document Type: Article

References (122)

1. Forrest S R 2004 The path to ubiquitous and low-cost organic electronic appliances on plastic Nature 428 911-8 (Pubitemid 38568095)
2. Gaudiana R and Brabec C 2008 Organic materials - fantastic plastic Nature Photon. 2 287-9
3. Service R F 2011 Outlook brightens for plastic solar cells Science 332 293
4. Green M A et al 2012 Solar cell efficiency tables (version 39) Prog. Photovolt. 20 12-20
5. Peters C H et al 2011 High efficiency polymer solar cells with long operating lifetimes Adv. Energy Mater. 1 491-4
6. Brabec C J et al 2010 Polymer-fullerene bulk-heterojunction solar cells Adv. Mater. 22 383956
7. Dennler G, Scharber M C and Brabec C J 2009 Polymer-fullerene bulk-heterojunction solar cells Adv. Mater. 21 1323-38
8. Hoppe H and Sariciftci N S 2006 Morphology of polymer/fullerene bulk heterojunction solar cells J. Mater. Chem. 16 45-61 (Pubitemid 43324484)
9. Yang X and Loos J 2007 Toward high-performance polymer solar cells: the importance of morphology control Macromolecules 40 1353-62 (Pubitemid 46423651)
10. Peet J et al 2009 The role of processing in the fabrication and optimization of plastic solar cells Adv. Mater. 21 1521-7
11. Yu G et al 1995 Polymer photovoltaic cells-enhanced efficiencies via a network of internal donor-acceptor heterojunctions Science 270 1789-91 (Pubitemid 126635480)
12. Halls J J M et al 1995 Efficient photodiodes from interpenetrating polymer networks Nature 376 498-500
13. Bredas J L et al 2009 Molecular understanding of organic solar cells: the challenges Acc. Chem. Res. 42 1691-9
14. Clarke T M and Durrant J R 2010 Charge photogeneration in organic solar cells Chem. Rev. 110 6736-67
15. Blom P W M et al 2007 Device physics of polymer: fullerene bulk heterojunction solar cells Adv. Mater. 19 1551-66 (Pubitemid 47153131)
16. Deibel C and Dyakonov V 2010 Polymer-fullerene bulk heterojunction solar cells Rep. Prog. Phys. 73 096401
17. Alvarado S F et al 1998 Direct determination of the exciton binding energy of conjugated polymers using a scanning tunneling microscope Phys. Rev. Lett. 81 1082-5 (Pubitemid 128628916)
18. Coropceanu V et al 2007 Charge transport in organic semiconductors Chem. Rev. 107 926-52 (Pubitemid 46736532)
19. Pivrikas A et al 2007 A review of charge transport and recombination in polymer/fullerene organic solar cells Prog. Photovolt. 15 677-96 (Pubitemid 350264922)
20. Shaw P E, Ruseckas A and Samuel I D W 2008 Exciton diffusion measurements in poly(3-hexylthiophene) Adv. Mater. 20 3516-20
21. Haugeneder A et al 1999 Exciton diffusion and dissociation in conjugated polymer fullerene blends and heterostructures Phys. Rev. B 59 15346-51
22. Cook S et al 2009 Estimate of singlet diffusion lengths in PCBM films by time-resolved emission studies Chem. Phys. Lett. 478 33-6
23. Brabec C J et al 2001 Tracing photoinduced electron transfer process in conjugated polymer/fullerene bulk heterojunctions in real time Chem. Phys. Lett. 340 232-6 (Pubitemid 33628163)
24. Bakulin A A et al 2010 Ultrafast hole-transfer dynamics in polymer/PCBM bulk heterojunctions Adv. Funct. Mater. 20 1653-60
25. Deibel C, Strobel T and Dyakonov V 2010 Role of the charge transfer state in organic donor-acceptor solar cells Adv. Mater. 22 4097-111
26. Bakulin A A et al 2012 The role of driving energy and delocalized states for charge separation in organic semiconductors Science 335 1340-4
27. Steim R, Kogler F R and Brabec C J 2010 Interface materials for organic solar cells J. Mater. Chem. 20 2499-512
28. Kim J Y et al 2006 New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer Adv. Mater. 18 572-6 (Pubitemid 43385774)
29. Krebs F C 2009 Fabrication and processing of polymer solar cells: a review of printing and coating techniques Sol. Energy Mater. Sol. Cells 93 394-412
30. Brabec C J et al 2001 Origin of the open circuit voltage of plastic solar cells Adv. Funct. Mater. 11 374-80 (Pubitemid 33050758)
31. Maurano A et al 2010 Recombination dynamics as a key determinant of open circuit voltage in organic bulk heterojunction solar cells: a comparison of four different donor polymers Adv. Mater. 22 4987-92
32. Scharber M C et al 2006 Design rules for donors in bulk-heterojunction solar cells - towards 10% energy-conversion efficiency Adv. Mater. 18 789-94
33. Park S H et al 2009 Bulk heterojunction solar cells with internal quantum efficiency approaching 100% Nature Photon. 3 297-U5
34. Brunetti F G, Kumar R and Wudl F 2010 Organic electronics from perylene to organic photovoltaics: painting a brief history with a broad brush J. Mater. Chem. 20 2934-48
35. Heeger A J 2010 Semiconducting polymers: the third generation Chem. Soc. Rev. 39 2354-71
36. Blouin N et al 2008 Toward a rational design of poly(2,7-carbazole) derivatives for solar cells J. Am. Chem. Soc. 130 732-42 (Pubitemid 351455587)
37. Allard N et al 2010 Germafluorenes: new heterocycles for plastic electronics Macromolecules 43 2328-33
38. Liang Y Y and Yu L P 2010 A new class of semiconducting polymers for bulk heterojunction solar cells with exceptionally high performance Acc. Chem. Res. 43 1227-36
39. Bundgaard E and Krebs F C 2007 Low band gap polymers for organic photovoltaics Sol. Energy Mater. Sol. Cells 91 954-85 (Pubitemid 46635041)
40. Shaheen S E et al 2001 2.5% efficient organic plastic solar cells Appl. Phys. Lett. 78 841-3 (Pubitemid 33630368)
41. Ma W L et al 2005 Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology Adv. Funct. Mater. 15 1617-22 (Pubitemid 41454589)
42. Li G et al 2005 High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends Nature Mater. 4 864-8
43. Peet J et al 2007 Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols Nature Mater. 6 497-500 (Pubitemid 47143454)
44. Chu T Y et al 2011 Morphology control in polycarbazole based bulk heterojunction solar cells and its impact on device performance Appl. Phys. Lett. 98 253301
45. He Z C et al 2011 Simultaneous enhancement of open-circuit voltage, short-circuit current density and fill factor in polymer solar cells Adv. Mater. 23 4636-43
46. Liang Y Y et al 2010 For the bright future - bulk heterojunction polymer solar cells with power conversion efficiency of 7.4% Adv. Mater. 22 E135-8
47. Chu T Y et al 2011 Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno[3,2-b:2',3'-d]silole copolymer with a power conversion efficiency of 7.3% J. Am. Chem. Soc. 133 4250-3
48. Amb C M et al 2011 Dithienogermole as a fused electron donor in bulk heterojunction solar cells J. Am. Chem. Soc. 133 10062-5
49. Szarko J M et al 2010 When function follows form: effects of donor copolymer side chains on film morphology and BHJ solar cell performance Adv. Mater. 22 5468-72
50. Yang X N et al 2005 Nanoscale morphology of high-performance polymer solar cells Nano Lett. 5 579-83 (Pubitemid 40609723)
51. Collins B A, Tumbleston J R and Ade H 2011 Miscibility, crystallinity, and phase development in P3HT/PCBM Solar cells: toward an enlightened understanding of device morphology and stability J. Phys. Chem. Lett. 2 3135-45
52. Collins B A et al 2010 Molecular miscibility of polymer-fullerene blends J. Phys. Chem. Lett. 1 3160-6
53. Treat N D et al 2011 Interdiffusion of PCBM and P3HT reveals miscibility in a photovoltaically active blend Adv. Energy Mater. 1 82-9
54. Mayer A C et al 2009 Bimolecular crystals of fullerenes in conjugated polymers and the implications of molecular mixing for solar cells Adv. Funct. Mater. 19 1173-9
55. Jamieson F C et al 2012 Fullerene crystallisation as a key driver of charge separation in polymer/fullerene bulk heterojunction solar cells Chem. Sci. 3 485-92
56. 61 -butyric acid methyl ester blends - route towards high efficiency polymer solar cells J. Mater. Chem. 17 3126-40 (Pubitemid 47170837)
57. Brady M A, Su G M and Chabinyc M L 2011 Recent progress in the morphology of bulk heterojunction photovoltaics Soft Matter 7 11065-77
58. Sirringhaus H et al 1999 Two-dimensional charge transport in self-organized, high-mobility conjugated polymers Nature 401 685-8 (Pubitemid 29485210)
59. Frankevich E, Maruyama Y and Ogata H 1993 Mobility of charge-carriers in vapor-phase grown C-60 single-crystal Chem. Phys. Lett. 214 39-44
60. Erb T et al 2005 Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells Adv. Funct. Mater. 15 1193-6 (Pubitemid 41042348)
61. Campoy-Quiles M et al 2008 Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends Nature Mater. 7 158-64 (Pubitemid 351161347)
62. Savenije T J et al 2005 The effect of thermal treatment on the morphology and charge carrier dynamics in a polythiophene-fullerene bulk heterojunction Adv. Funct. Mater. 15 1260-6 (Pubitemid 41119969)
63. Hoppe H et al 2004 Nanoscale morphology of conjugated polymer/fullerene-based bulk-heterojunction solar cells Adv. Funct. Mater. 14 1005-11
64. Alem S et al 2011 Effect of mixed solvents on PCDTBT:PC(70)BM based solar cells Org. Electron. 12 1788-93
65. Yang H C et al 2005 Effect of mesoscale crystalline structure on the field-effect mobility of regioregular poly(3-hexyl thiophene) in thin-film transistors Adv. Funct. Mater. 15 671-6 (Pubitemid 40519787)
66. Jo J et al 2009 Time-Dependent morphology evolution by annealing processes on polymer:fullerene blend solar cells Adv. Funct. Mater. 19 866-74
67. Chu C W et al 2008 Control of the nanoscale crystallinity and phase separation in polymer solar cells Appl. Phys. Lett. 92 103306 (Pubitemid 351393998)
68. Koppe M et al 2009 Influence of molecular weight distribution on the gelation of P3HT and its impact on the photovoltaic performance Macromolecules 42 4661-6
69. Bertho S et al 2009 Controlling the morphology of nanofiber-P3HT:PCBM blends for organic bulk heterojunction solar cells Org. Electron. 10 1248-51
70. Kim J S et al 2011 High-efficiency organic solar cells based on preformed poly(3-hexylthiophene) nanowires Adv. Funct. Mater. 21 480-6
71. Berson S et al 2007 Poly (3-hexylthiophene) fibers for photovoltaic applications Adv. Funct. Mater. 17 1377-84 (Pubitemid 46847655)
72. Chen C Y et al 2010 Formation and thermally-induced disruption of nanowhiskers in poly(3-hexylthiophene)/xylene gel studied by small-angle x-ray scattering Macromolecules 43 7305-11
73. Shimomura T et al 2011 Relationship between structural coherence and intrinsic carrier transport in an isolated poly(3-hexylthiophene) nanofiber Phys. Rev. B 83 115314
74. Wang T et al 2010 The development of nanoscale morphology in polymer: fullerene photovoltaic blends during solvent casting Soft Matter 6 4128-34
75. Sanyal M et al 2011 In situ x-ray study of drying-temperature influence on the structural evolution of bulk-heterojunction polymer-fullerene solar cells processed by doctor-blading Adv. Energy Mater. 1 363-7
76. Sanyal M et al 2011 Effect of photovoltaic polymer/fullerene blend composition ratio on microstructure evolution during film solidification investigated in real time by x-ray diffraction Macromolecules 44 3795-800
77. Schmidt-Hansberg B et al 2009 In situ monitoring the drying kinetics of knife coated polymer-fullerene films for organic solar cells J. Appl. Phys. 106 124501
78. Schmidt-Hansberg B et al 2011 Moving through the phase diagram: morphology formation in solution cast polymer-fullerene blend films for organic solar cells ACS Nano 5 8579-90
79. Campoy-Quiles M et al 2011 Real-time studies during coating and post-deposition annealing in organic semiconductors Thin Solid Films 519 2678-81
80. Campoy-Quiles M et al 2005 Ellipsometric characterization of the optical constants of polyfluorene gain media Adv. Funct. Mater. 15 925-33 (Pubitemid 40844276)
81. DeLongchamp D M, Kline R J and Herzing A 2012 Nanoscale structure measurements for polymer-fullerene photovoltaics Energy Environ. Sci. 5 5980-93
82. Salleo A et al 2010 Microstructural characterization and charge transport in thin films of conjugated polymers Adv. Mater. 22 3812-38
83. Erb T et al 2006 Absorption and crystallinity of poly(3-hexylthiophene)/ fullerene blends in dependence on annealing temperature Thin Solid Films 511 483-5 (Pubitemid 43728911)
84. Zhokhavets U et al 2006 Relation between absorption and crystallinity of poly(3-hexylthiophene)/fullerene films for plastic solar cells Chem. Phys. Lett. 418 347-50 (Pubitemid 43121277)
85. Chen H P et al 2012 The miscibility and depth profile of PCBM in P3HT: thermodynamic information to improve organic photovoltaics Phys. Chem. Chem. Phys. 14 5635-41
86. Yin W and Dadmun M 2011 A new model for the morphology of P3HT/PCBM organic photovoltaics from small-angle neutron scattering: rivers and streams ACS Nano 5 4756-68
87. Germack D S et al 2010 Interfacial segregation in polymer/fullerene blend films for photovoltaic devices Macromolecules 43 3828-36
88. Lee J K et al 2008 Processing additives for improved efficiency from bulk heterojunction solar cells J. Am. Chem. Soc. 130 3619-23 (Pubitemid 351456066)
89. Rogers J T et al 2012 Time-resolved structural evolution of additive-processed bulk heterojunction solar cells J. Am. Chem. Soc. 134 2884-7
90. Gu Y, Wang C and Russell T P 2012 Multi-length-scale morphologies in PCPDTBT/PCBM bulk-heterojunction solar cells Adv. Energy Mater. 2 683-90
91. Padinger F, Rittberger R S and Sariciftci N S 2003 Effects of postproduction treatment on plastic solar cells Adv. Funct. Mater. 13 85-8
92. Beal R M et al 2010 The molecular structure of polymer-fullerene composite solar cells and its influence on device performance Macromolecules 43 2343-8
93. Pearson A J et al 2011 Imaging the bulk nanoscale morphology of organic solar cell blends using helium ion microscopy Nano Lett. 11 4275-81
94. Parnell A J et al 2010 Depletion of PCBM at the cathode interface in P3HT/PCBM thin films as quantified via neutron reflectivity measurements Adv. Mater. 22 2444-7
95. Watts B et al 2009 A quantitative study of PCBM diffusion during annealing of P3HT: PCBM blend films Macromolecules 42 8392-7
96. Zhao J et al 2009 Phase diagram of P3HT/PCBM blends and its implication for the stability of morphology J. Phys. Chem. B 113 1587-91
97. Hopkinson P E et al 2011 A phase diagram of the P3HT:PCBM organic photovoltaic system: implications for device processing and performance Macromolecules 44 2908-17
98. Pearson A J et al 2012 Rationalizing phase transitions with thermal annealing temperatures for P3HT:PCBM organic photovoltaic devices Macromolecules 45 1499-508
99. Keddie J L, Jones R A L and Cory R A 1994 Size-dependent depression of the glass-transition temperature in polymer-films Europhys. Lett. 27 59-64
100. Forrest J A, Dalnoki-Veress K and Dutcher J R 1997 Interface and chain confinement effects on the glass transition temperature of thin polymer films Phys. Rev. E 56 5705-16 (Pubitemid 127736262)
101. Agostinelli T et al 2011 Real-time investigation of crystallization and phase-segregation dynamics in P3HT:PCBM solar cells during thermal annealing Adv. Funct. Mater. 21 1701-8
102. Muller C et al 2008 Binary organic photovoltaic blends: a simple rationale for optimum compositions Adv. Mater. 20 3510-5
103. Lilliu S et al 2011 Dynamics of crystallization and disorder during annealing of P3HT/PCBM bulk heterojunctions Macromolecules 44 2725-34
104. Wu W R et al 2011 Competition between fullerene aggregation and poly(3-hexylthiophene) crystallization upon annealing of bulk heterojunction solar cells ACS Nano 5 6233-43
105. Shuttle C G et al 2012 In situ current voltage measurements for optimization of a novel fullerene acceptor in bulk heterojunction photovoltaics J. Polym. Sci. B 50 174-9
106. Treat N D et al 2011 In situ measurement of power conversion efficiency and molecular ordering during thermal annealing in P3HT:PCBM bulk heterojunction solar cells J. Materi. Chem. 21 15224-31
107. Labram J G et al 2011 In situ monitoring of the solid-state microstructure evolution of polymer: fullerene blend films using field-effect transistors Adv. Funct. Mater. 21 356-63
108. Labram J G et al 2011 Measurement of the diffusivity of fullerenes in polymers using bilayer organic field effect transistors Phys. Rev. B 84 075344
109. Wang T et al 2011 Evolution of structure, optoelectronic properties, and device performance of polythiophene: fullerene solar cells during thermal annealing Adv. Funct. Mater. 21 1383-90
110. Wang T et al 2012 Correlating structure with function in thermally annealed PCDTBT:PC70BM photovoltaic blends Adv. Funct. Mater. 22 1399-408
111. Verploegen E et al 2010 Effects of thermal annealing upon the morphology of polymer-fullerene blends Adv. Funct. Mater. 20 3519-29
112. Park J H et al 2009 Effect of annealing solvent solubility on the performance of poly(3-hexylthiophene)/methanofullerene solar cells J. Phys. Chem. C 113 17579-84
113. Tang H W et al 2010 Precise construction of PCBM aggregates for polymer solar cells via multi-step controlled solvent vapor annealing J. Mater. Chem. 20 683-8
114. Miller S et al 2008 Investigation of nanoscale morphological changes in organic photovoltaics during solvent vapor annealing J. Mater. Chem. 18 306-12
115. Verploegen E et al 2012 Manipulating the morphology of P3HT-PCBM bulk heterojunction blends with solvent vapour annealing Chem. Mater. 24 3923-31
116. Crossland E J W et al 2011 Systematic control of nucleation density in poly(3-hexylthiophene) thin films Adv. Funct. Mater. 21 518-24
117. Huttner S et al 2009 Controlled solvent vapour annealing for polymer electronics Soft Matter 5 4206-11
118. Toolan D T W and Howse J R 2013 Development of in situ studies of spin coated polymer films J. Mater. Chem. C at press
119. Koppe M et al 2010 Near IR sensitization of organic bulk heterojunction solar cells: towards optimization of the spectral response of organic solar cells Adv. Funct. Mater. 20 338-46
120. Xue B F et al 2010 Vertical Stratification and interfacial structure in P3HT:PCBM organic solar cells J. Phys. Chem. C 114 15797-805
121. Xu Z et al 2009 Vertical phase separation in poly(3-hexylthiophene): fullerene derivative blends and its advantage for inverted structure solar cells Adv. Funct. Mater. 19 1227-34
122. Heriot S Y and Jones R A L 2005 An interfacial instability in a transient wetting layer leads to lateral phase separation in thin spin-cast polymer-blend films Nature Mater. 4 782-6 (Pubitemid 41397028)