History, advances, and challenges in liquid flow and flow boiling heat transfer in microchannels: A critical review

2010 14th International Heat Transfer Conference, IHTC 14

Volumn 8, Issue , 2010, Pages 441-460

  Kandlikar, Satish G ^a  

^a ROCHESTER INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CRITICAL REVIEW; FLOW BOILING; FLOW BOILING HEAT TRANSFER; FUTURE RESEARCH DIRECTIONS; HEAT TRANSFER PERFORMANCE; HEAT TRANSFER RATE; HIGH HEAT FLUX REMOVAL; HIGH PERFORMANCE MICROCHANNELS; HIGH SURFACE AREA; HISTORICAL PERSPECTIVE; LIQUID FLOW; MICROCHANNEL HEAT EXCHANGER; PERFORMANCE ENHANCEMENTS; PRACTICAL IMPLEMENTATION; SINGLE PHASE LIQUID FLOW; THERMAL CONTROL; TWO-PHASE FLOW BOILING; UNDERLYING MECHANISM; VOLUME RATIO; WEIGHT CONSTRAINTS;

HEAT EXCHANGERS; HEAT TRANSFER; LIQUIDS; PHASE TRANSITIONS;

MICROCHANNELS;

EID: 84860530963     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IHTC14-23353     Document Type: Conference Paper

References (186)

1. Tuckerman, D. B., and Pease, R. F. W., 1981, "High-Performance Heat Sinking for VLSI," IEEE Electron Device Letters, ELD-2 pp. 126-129.
2. Goodling, J. S., 1993, "Microchannel Heat Exchangers: A Review," Proc. High Heat Flux Engineering II, July 12-13, 1993, San Diego, CA, USA, 1993, pp. 66-82.
3. Mehendale, S. S., Jacobi, A. M., and Shah, R. K., 2000, "Fluid Flow and Heat Transfer at Micro and Meso Scales with Application to Heat Exchanger Design.," Appl. Mech. Review, 53(7), pp. 175-193.
4. Palm, B., 2001, "Heat Transfer in Microchannels," Microsacle Thermophysical Engineering, 5(3), pp. 155-175. (Pubitemid 33398067)
5. Kandlikar, S. G., 2001, "Two-Phase Flow Patterns, Pressure Drop, and Heat Transfer During Boiling in Minichannel Flow Passages of Compact Evaporators," Compact Heat Exchangers and Enhancement Technology For The Process Industries, pp. 319-334.
6. Sobhan, C. B., and Garimella, S. V., 2001, "A Comparative Analysis of Studies on Heat Transfer and Fluid Flow in Microchannels," Microscale Thermophysical Engineering, 5(4), pp. 293-311. (Pubitemid 33571126)
7. Kandlikar, S. G., 2002, "Two-Phase Flow Patterns, Pressure Drop, and Heat Transfer During Boiling in Minichannel Flow Passages of Compact Evaporators," Heat Transfer Engineering, 23(1), pp. 5-23. (Pubitemid 34554500)
8. Kandlikar, S. G., 2002, "Fundamental Issues Related to Flow Boiling in Minichannels and Microchannels," Experimental Thermal and Fluid Science, 26(2-4), pp. 389-407. (Pubitemid 34825185)
9. Watel, B., 2003, "Review of Standard Flow Boiling in Small Passages of Compact Heat-Exchangers," International Journal of Thermal Sciences, 42(2), pp. 107-140. (Pubitemid 36184832)
10. Bergles, A. E., Lienhard, J. H. V., Kendall, G. E., and Griffith, P., 2003, "Boiling and Evaporation in Small Diameter Channels," Heat Transfer Engineering, 24, pp. 18-40.
11. Thome, J. R., 2004, "Boiling in Microchannels: A Review of Experiment and Theory," International Journal Heat Fluid Flow, 25(2), pp. 128-139. (Pubitemid 38439217)
12. Morini, G. L., 2004, "Single-Phase Convective Heat Transfer in Microchannels: A Review of Experimental Results," International Journal of Thermal Sciences, 43(7), pp. 631-651.
13. Hassan, I., Phutthavong, P., and Abdelgawad, M., 2004, "Microchannel Heat Sinks: An Overview of the State-of-the-Art," Microscale Thermophysical Engineering, 8(3), pp. 183-205.
14. Bergles, A. E., and Kandlikar, S. G., 2005, "On the Nature of Critical Heat Flux in Microchannels," Transactions of the ASME. Journal of Heat Transfer, 127, pp. 101-107. (Pubitemid 40383014)
15. Royne, A., Dey, C. J., and Mills, D. R., 2005, "Cooling of Photo Voltaic Cells under Concentrated Illumination: A Critical Review," Solar Energy Materials and Solar Cells, 86(4), pp. 451-483. (Pubitemid 40259542)
16. Ohta, H., 2005, "Boiling and Two-Phase Flow in Channels with Extremely Small Dimensions: A Review of Japanese Research," Microfluidics and Nanofluidics, 1(2), pp. 94-107. (Pubitemid 40794902)
17. Bayraktar, T., and Pidugu, S. B., 2006, "Characterization of Liquid Flows in Microfluidic Systems," International Journal of Heat and Mass Transfer, 49(5), pp. 815-824. (Pubitemid 43267695)
18. Tardist, L., 2007, "Review on Two-Phase Instabilities in Narrow Spaces," International Journal of Heat Fluid Flow, 28(1), pp. 54-62.
19. Agostini, B., Fabbri, M., and Park, J. E., 2007, "State of the Art of High Heat Flux Cooling Technologies," Heat Transfer Engineering, 28(4), pp. 258-281. (Pubitemid 46396021)
20. Kandlikar, S. G., and Bapat, A. V., 2007, "Evaluation of Jet Impingement, Spray and Microchannel Chip Cooling Options for High Heat Flux Removal," Heat Transfer Engineering, 28(11), pp. 911-923. (Pubitemid 47171552)
21. Saisorn, S., and Wongwises, S., 2008, "A Review of Two-Phase Gas-Liquid Adiabatic Flow Characteristics in Micro-Channels," Renewable and Sustainable Energy Reviews, 12(3), pp. 824-838. (Pubitemid 351246737)
22. Kandlikar, S. G., 2008, "Exploring Roughness Effect on Laminar Internal Flow-Are We Ready for Change?," Nanoscale and Microscale Thermophysical Engineering, 12(1), pp. 61-82.
23. Fan, Y., and Luo, L. G., 2008, "Recent Applications of Advances in Microchannel Heat Exchangers and Multi-Scale Design Optimization," Heat Transfer Engineering, 29(5), pp. 461-474. (Pubitemid 351287613)
24. Bertsch, S. S., Groll, E. A., and Garimella, S. V., 2008, "Review and Comparative Analysis of Studies on Saturated Flow Boiling in Small Channels," Nanoscale and Microscale Thermophysical Engineering, 12(2), pp. 187-227.
25. Roday, A. P., and Jensen, M. K., 2009, "A Review of the Critical Heat Flux Condition in Mini-and Microchannels," Journal of Mechanical Science and Technology, 23(9), pp. 2529-2547.
26. Rosa, P., Karayiannis, T. G., and Collins, M. W., 2009, "Single-Phase Heat Transfer in Microchannels: The Importance of Scaling Effects," Applied Thermal Engineering, 29(17-18), pp. 3447-3468.
27. Saha, S. K., Zummo, G., and Celata, G. P., 2010, "Review on Flow Boiling in Microchannels," paper to appear in International Journal Microscale, Nanoscale, Thermal and Fluid Transport Phenomana, 1(2).
28. Obot, N. T., 2002, "Toward a Better Understanding of Friction and Heat/Mass Transfer in Microchannels - a Literature Review," Microscale Thermophysical Engineering, 6(3), pp. 155-173.
29. Sasaki, S., and Kishimoto, T., 1986, "Optimal Structure for Microgrooved Cooling Fin for High-Power LSI Devices," Electronics Letters, 22(25), pp. 1332-1334. (Pubitemid 17492723)
30. Kishimoto, T., and Sasaki, S., 1987, "Cooling Characteristics of Diamond-Shaped Interrupted Cooling Fin for High-Power Lsi Devices," Electronics Letters, 23, pp. 456-457. (Pubitemid 17586297)
31. Phillips, R. J., Glicksman, L., and Larson, R., 1987, "Forced-Convection, Liquid-Cooled, Microchannel Heat Sinks for High-Power-Density Microelectronics," Proc. Cooling Technology for Electronic Equipment, W. Aung, ed. Honolulu, Hawii, pp. 295-316.
32. Walpole, J. N., Liau, Z. L., Diadiuk, V., and Missaggia, L. J., 1988, "Microchannel Heat Sinks and Microlens Arrays for High Average-Power Diode Laser Arrays," Proc. LEOS '88-Lasers and Electro-Optics Society Annual Meeting, November 2, 1988-November 4, 1988, Santa Clara, CA, USA, pp. 447-448.
33. Knight, R. W., Hall, D. J., Goodling, J. S., and Jaeger, R. C., 1992, "Heat Sink Optimization with Application to Microchannels," IEEE Transactions on Components, Hybrids, and Manufacturing Technology, 15(5), pp. 832-842.
34. Peng, X. F., Peterson, G. P., and Wang, B. X., 1994, "Frictional Flow Characteristics of Water Flowing through Rectangular Microchannels," Experimental Heat Transfer, 7(4), pp. 249-264.
35. Peng, X. F., Peterson, G. P., and Wang, B. X., 1994, "Heat Transfer Characteristics of Water Flowing through Microchannels," Experimental Heat Transfer, 7(4), pp. 265-283.
36. Harris, C., Despa, M., and Kelly, K., 2000, "Design and Fabrication of a Cross Flow Micro Heat Exchanger," Journal of Microelectromechanical Systems, 9(4), pp. 502-508. (Pubitemid 32169013)
37. Fedorov, A. G., and Viskanta, R., 2000, "Three-Dimensional Conjugate Heat Transfer in the Microchannel Heat Sink for Electronic Packaging," International Journal of Heat and Mass Transfer, 43, pp. 399-415. (Pubitemid 30073970)
38. Judy, J., Maynes, D., and Webb, B. W., 2002, "Characterization of Frictional Pressure Drop for Liquid Flows through Microchannels," International Journal of Heat and Mass Transfer, 45(17), pp. 3477-3489. (Pubitemid 34689929)
39. Qu, W. L., and Mudawar, I., 2002, "Experimental and Numerical Study of Pressure Drop and Heat Transfer in a Single-Phase Micro-Channel Heat Sink," International Journal of Heat and Mass Transfer, 45(12), pp. 2549-2565. (Pubitemid 34580357)
40. Kandlikar, S. G., and Grande, W. J., 2003, "Evolution of Microchannel Flow Passages-Thermohydraulic Performance and Fabrication Technology," Heat Transfer Engineering, 24(1), pp. 3-17.
41. Wu, H. Y., and Ping, C., 2003, "An Experimental Study of Convective Heat Transfer in Silicon Microchannels with Different Surface Conditions," International Journal of Heat and Mass Transfer, 46(14), pp. 2547-56. (Pubitemid 36610809)
42. Kandlikar, S. G., Joshi, S., and Tian, S., 2003, "Effect of Surface Roughness on Heat Transfer and Fluid Flow Characteristics at Low Reynolds Numbers in Small Diameter Tubes," Heat Transfer Engineering, 24(3), pp. 4-16.
43. Guo, Z.-Y., and Li, Z.-X., 2003, "Size Effect on Single-Phase Channel Flow and Heat Transfer at Microscale," International Journal of Heat and Fluid Flow, 24(3), pp. 284-298. (Pubitemid 36615047)
44. Kandlikar, S. G., and Grande, W. J., 2004, "Evaluation of Single Phase Flow in Microchannels for High Heat Flux Chip Cooling-Thermohydraulic Performance Enhancement and Fabrication Technology," Int. J. Therm. Sci., 45(11), pp. 1073-1083.
45. Steinke, M. E., and Kandlikar, S. G., 2004, "Single-Phase Heat Transfer Enhancement Techniques in Microchannel and Minichannel Flows," Proc. Proceedings of the Second International Conference on Microchannels and Minichannels (ICMM2004), June 17-19, 2004, Rochester, NY, United States, pp. 141-148.
46. Lelea, D., Nishio, S., and Takano, K., 2004, "The Experimental Research on Microtube Heat Transfer and Fluid Flow of Distilled Water", International Journal of Heat and Mass Transfer, 47, pp. 2817-2830. (Pubitemid 38454063)
47. Sharp, K. V., and Adrian, R. J., 2004, "Transition from Laminar to Turbulent Flow in Liquid Filled Microtubes," Experiments in Fluids, 36(5), pp. 741-747. (Pubitemid 38644209)
48. Koo, J., and Kleinstreuer, C., 2005, "Laminar Nanofluid Flow in Microheat-Sinks," International Journal of Heat and Mass Transfer, 48(13), pp. 2652-2661.
49. Lee, P.-S., Garimella, V., and Dong, L., 2005, "Investigation of Heat Transfer in Rectangular Microchannels," International Journal of Heat and Mass Transfer, 48, pp. 1688-1704. (Pubitemid 40572468)
50. Colgan, E. G., Furman, B., Gaynes, M., Graham, W., Labianca, N., Magerlein, J. H., Polastre, R. J., Rothwell, M. B., Bezama, R. J., Choudhary, R., Marston, K., Toy, H., Wakil, J., Zitz, J., and Schmidt, R., 2005, "A Practical Implementation of Silicon Microchannel Coolers for High Power Chips," Proc. 21st Annual IEEE Semiconductor Thermal Measurement and Management Symposium, March 15-17, 2005, San Jose, CA, United States, pp. 1-7. (Pubitemid 41696247)
51. Kandlikar, S. G., Schmitt, D., Carrano, A. L., and Taylor, J. B., 2005, "Characterization of Surface Roughness Effects on Pressure Drop in Single-Phase Flow in Minichannels," Physics of Fluids, 17(10), pp.1-11.
52. Celata, G. P., Cumo, M., Mcphail, S., and Zummo, G., 2006, "Characterization of Fluid Dynamic Behavior and Channel Wall Effects in Microtube," International Journal of Heat and Fluid Flow, 27(1), pp. 135-143. (Pubitemid 43055749)
53. Tuckerman, D. B., 1984, "Heat-Transfer Microstructures for Integrated Circuits," Ph.D. Thesis, Stanford University, Stanford, CA.
54. Mundinger, D., Beach, R., Benett, W., Solarz, R., Krupke, W., Staver, R., and Tuckerman, D., 1988, "Demonstration of High-Performance Silicon Microchannel Heat Exchangers for Laser Diode Array Cooling," Applied Physics Letters, 53(12), pp. 1030-1032.
55. Phillips, R. J., 1987, "Forced-Convection, Liquid-Cooled, Microchannel Heat Sinks," MSME Massachusetts Institute of Technology, Cambridge.
56. Phillips, R. J., 1990, Advances in Thermal Modeling of Electronic Components and Systems, ASME Press, New York, NY, Chap. 3.
57. Missaggia, L. J., Walpole, J. N., Liau, Z. L., and Phillips, R. J., 1989, "Microchannel Heat Sinks for Two-Dimensional High-Power-Density Diode Laser Arrays," IEEE Journal of Quantum Electronics, 25(9), pp. 1988-1992. (Pubitemid 20618302)
58. Turlik, I., Reisman, A., Darveaux, R., and Hwang, L. T., 1989, "Multichip Packaging for Supercomputers," Proc. Proceedings of the Technical Program. NEPCON West '89, 13-15 June 1989, Anaheim, CA USA, pp. 37-58.
59. Bar-Cohen, A., and Jelinek, M., 1985, "Optimum Arrays of Longitudinal, Rectangular Fins in Convective Heat Transfer," Heat Transfer Engineering, 6(3), pp. 68-78. (Pubitemid 16491556)
60. Bejan, A., and Morega, A. M., 1993, "Optical Arrays of Pin Fins and Plate Fins in Laminar Forced Convection," ASME journal of Heat Transfer, 115, pp. 75-81.
61. Peng, X. F., and Wang, B. X., 1993, "Forced Convection and Flow Boiling Heat Transfer for Liquid Flowing through Microchannels," International Journal of Heat and Mass Transfer, 36(14), pp. 3421-3427. (Pubitemid 23713670)
62. Wang, B. X., and Peng, X. F., 1994, "Experimental Investigation on Liquid Forced Convection Heat Transfer through Microchannels," International Journal of Heat and Mass Transfer, 337(Supplement 1), pp. 73-82. (Pubitemid 277378)
63. Mala, G. M., Dongqing, L., and Dale, J. D., 1997, "Heat Transfer and Fluid Flow in Microchannels," International Journal of Heat and Mass Transfer, 40(13), pp. 3079-88.
64. Mala, G. M., and Dongqing, L., 1999, "Flow Characteristics of Water in Microtubes," International Journal of Heat and Fluid Flow, 20(2), pp. 142-148.
65. Xu, B., Ooi, K. T., Wong, N. T., and Choi, W. K., 2000, "Experimental Investigation of Flow Friction for Liquid Flow in Microchannels," International Communications in Heat and Mass Transfer, 27, pp. 1165-76.
66. Steinke, M. E., and Kandlikar, S. G., 2006, "Single-Phase Liquid Friction Factors in Microchannels," International Journal of Thermal Sciences, 45(11), pp. 1073-1083. (Pubitemid 44293449)
67. Steinke, M. E., and Kandlikar, S. G., 2004, "Control and Effect of Dissolved Air in Water During Flow Boiling in Microchannels," International Journal of Heat and Mass Transfer, 47, pp. 1925-1935. (Pubitemid 38119508)
68. Kandlikar, S. G., 2010, "Microchannels: Rapid Growth of a Nascent Technology," Journal of Heat Transfer, 132(4).
69. Peles, Y. P., Kosar, A., Mishra, C., Kuo, C.-J., and Schneider, B., 2005, "Forced Convective Heat Transfer across a Pin Fin Micro Heat Sink," International Journal of Heat and Mass Transfer, 48(17), pp. 3615-3627. (Pubitemid 40849842)
70. Steinke, M. E., and Kandlikar, S. G., 2006, "Single-Phase Liquid Heat Transfer in Plain and Enhanced Microchannels," Proc. 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, June 19-21, 2006, Limerick, Ireland, B, pp. 943-951.
71. Garimella, S. V., and Singhal, V., 2004, "Single-Phase Flow and Heat Transport and Pumping Considerations in Microchannel Heat Sinks," Heat Transfer Engineering, 25(1), pp. 15-25.
72. Kandlikar, S. G., Upadhye, H. R., and Ieee, 2005, Twenty-First Annual IEEE Semiconductor Thermal Measurement and Management Symposium, Proceedings 2005.
73. Liu, D., and Garimella, S. V., 2005, "Analysis and Optimization of the Thermal Performance of Microchannel Heat Sinks," International Journal of Numerical Methods for Heat & Fluid Flow, 15(1), pp. 7-26. (Pubitemid 40242594)
74. Lee, P. S., and Garimella, S. V., 2006, "Thermally Developing Flow and Heat Transfer in Rectangular Microchannels of Different Aspect Ratios," International Journal of Heat and Mass Transfer, 49(17-18), pp. 3060-3067. (Pubitemid 43902830)
75. Kandlikar, S. G., 2005, "Roughness Effects at Microscale-Reassessing Nikuradse's Experiments on Liquid Flow in Rough Tubes," Bulletin of the Polish Academy of Sciences: Technical Sciences, 53(4), pp. 343-349. (Pubitemid 43129974)
76. Taylor, J. B., Carrano, A. L., and Kandlikar, S. G., 2006, "Characterization of the Effect of Surface Roughness and Texture on Fluid Flow-Past, Present, and Future," International Journal of Thermal Sciences, 45(10), pp. 962-968.
77. Brackbill, T. P., and Kandlikar, S. G., 2010, "Application of Lubrication Theory and Study of Roughness Pitch During Laminar, Transition, and Low Reynolds Number Turbulent Flow at Microscale," Heat Transfer Engineering, 31(8), pp. 635-645.
78. Rawool, A. S., Mitra, S. K., and Kandlikar, S. G., 2006, "Numerical Simulation of Flow through Microchannels with Designed Roughness," Microfluidics and Nanofluidics, 2(3), pp. 215-221.
79. Croce, G., D'agaro, P., and Nonino, C., 2007, "Three-Dimensional Roughness Effect on Microchannel Heat Transfer and Pressure Drop," International Journal of Heat and Mass Transfer, 50, pp. 5249-5259. (Pubitemid 350180856)
80. Kleinstreuer, C., and Koo, J., 2004, "Computational Analysis of Wall Roughness Effects for Liquid Flow in Micro-Conduits," Journal of Fluids Engineering, 126(1), pp. 1-9.
81. Bahrami, M., Yovanovich, M. M., and Culham, J. R., 2006, "Pressure Drop of Fully-Developed, Laminar Flow in Microchannel of Arbitrary Cross-Section," Journal of Fluids Engineering, 128(3), pp. 632-637. (Pubitemid 43900382)
82. Qu, W., Mala, G. M., and Li, D., 2000, "Pressure-Driven Water Flows in Trapezoidal Silicon Microchannels," International Journal of Heat and Mass Transfer, 43(3), pp. 353-364.
83. Qu, W., Mala, G. M., and Li, D., 2000, "Heat Transfer for Water Flow in Trapezoidal Silicon Microchannels," International Journal of Heat and Mass Transfer, 43(21), pp. 3925-3936.
84. Morini, G. L., Lorenzini, M., Salvigni, S., and Celata, G. P., 2010, "Experimental Analysis of Microconvective Heat Transfer in the Laminar and Transitional Regions," Experimental Heat Transfer, 23(1), pp. 73-93.
85. Gamrat, G., Favre-Marinet, M., and Le Person, S., 2009, "Modelling of Roughness Effects on Heat Transfer in Thermally Fully-Developed Laminar Flows through Microchannels," International Journal of Thermal Sciences, 48, pp. 2203-2214.
86. Narasimha, R., and Sreenivasan, K. R., 1979, Advances in Applied Mechanics, Elsevier.
87. Hu, Y. D., Werner, C., and Li, D. Q., 2003, "Influence of Three-Dimensional Roughness on Pressure-Driven Flow through Microchannels," Journal of Fluids Engineering-Transactions of the Asme, 125(5), pp. 871-879.
88. Xu, J. L., Gan, Y. H., Zhang, D. C., and Li, X. H., 2005, "Microscale Heat Transfer Enhancement Using Thermal Boundary Layer Redeveloping Concept," International Journal of Heat and Mass Transfer, 48, pp. 1662-1674. (Pubitemid 40572466)
89. Chang, S. W., Liou, T.-M., and Juan, W.-C., 2005, "Influence of Channel Height on Heat Transfer Augmentation in Rectangular Channels with Two Opposite Rib-Roughened Walls," International Journal of Heat and Mass Transfer, 48 pp. 2806-2813. (Pubitemid 40572830)
90. Wei, X. J., Joshi, Y. K., and Ligrani, P. M., 2007, "Numerical Simulation of Laminar Flow and Heat Transfer inside a Microchannel with One Dimpled Surface," Journal of Electronic Packaging, Transactions of the ASME, 129, pp. 63-70. (Pubitemid 351181886)
91. Kosar, A., and Peles, Y., 2006, "Thermal-Hydraulic Performance of Mems-Based Pin Fin Heat Sink," Journal of Heat Transfer, 128, pp. 121-131.
92. Foong, A. J. L., Ramesh, N., and Chandratilleke, T. T., 2009, "Laminar Convective Heat Transfer in a Microchannel with Internal Longitudinal Fins," International Journal of Thermal Sciences, 48, pp. 1908-1913.
93. Zhang, H. Y., Pinjala, D., Iyer, M. K., Nagarajan, R., Joshi, Y. K., Wong, T. N., and Toh, K. C., 2005, "Assessments of Single-Phase Liquid Cooling Enhancement Techniques for Microelectronics Systems," Proc. ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems: Advances in Electronic Packaging 2005, July 17-22, 2005, San Francisco, CA, United states, PART A, pp. 43-50. (Pubitemid 43251474)
94. Tsuzuki, N., Kato, Y., Nikitin, K., and Ishizuka, T., 2009, "Advanced Microchannel Heat Exchanger with S-Shaped Fins," Journal of Nuclear Science and Technology, 46(5), pp. 403-412.
95. Lee, S., Choi, S. U. S., Li, S., and Eastman, J. A., 1999, "Measuring Thermal Conductivity of Fluids Containing Oxide Nanoparticles," Journal of Heat Transfer-Transactions of the ASME, 121(2), pp. 280-289. (Pubitemid 29419226)
96. Xuan, Y. M., and Li, Q., 2000, "Heat Transfer Enhancement of Nanofluids," International Journal of Heat and Fluid Flow, 21(1), pp. 58-64. (Pubitemid 30192457)
97. Keblinski, P., Phillpot, S. R., Choi, S. U. S., and Eastman, J. A., 2002, "Mechanisms of Heat Flow in Suspensions of Nano-Sized Particles (Nanofluids)," International Journal of Heat and Mass Transfer, 45(4), pp. 855-863. (Pubitemid 34034421)
98. Choi, S. U. S., and Jang, S. P., 2006, "Cooling Performance of a Microchannel Heat Sink with Nanofluids," Applied Thermal Engineering, 26(17-18), pp. 2457-63. (Pubitemid 43928756)
99. Chein, R., and Chuang, J., 2007, "Experimental Microchannel Heat Sink Performance Studies Using Nanofluids," International Journal of Thermal Sciences, 46(1), pp. 57-66. (Pubitemid 44708802)
100. Chein, R. Y., and Huang, G. M., 2005, "Analysis of Microchannel Heat Sink Performance Using Nanofluids," Appl. Thermal Eng., 25(17-18), pp. 3104-3114.
101. Jung, J.-Y., Oh, H.-S., and Kwak, H.-Y., 2009, "Forced Convective Heat Transfer of Nanofluids in Microchannels," International Journal of Heat and Mass Transfer, 52, pp. 466-72.
102. Bergman, T. L., 2009, "Effect of Reduced Specific Heats of Nanofluids on Single Phase, Laminar Internal Forced Convection," International Journal of Heat and Mass Transfer, 52(5-6), pp. 1240-1244.
103. Trisaksri, V., and Wongwises, S., 2007, "Critical Review of Heat Transfer Characteristics of Nanofluids," Renewable and Sustainable Energy Reviews, 11(3), pp. 512-523. (Pubitemid 44316931)
104. Das, S. K., Choi, S. U. S., and Patel, H. E., 2006, "Heat Transfer in Nanofluids-A Review," Heat Transfer Engineering, 27(10), pp. 3-19. (Pubitemid 44483223)
105. Wang, X. Q., and Mujumdar, A. S., 2007, "Heat Transfer Characteristics of Nanofluids: A Review," International Journal of Thermal Sciences, 46(1), pp. 1-19. (Pubitemid 44708805)
106. Ozerinc, S., Kakac, S., and Yazicioglu, A. G., 2010, "Enhanced Thermal Conductivity of Nanofluids: A State-of-the-Art Review," Microfluidics and Nanofluidics, 8(2), pp. 145-170.
107. Chandrasekar, M., and Suresh, S., 2009, "A Review on the Mechanisms of Heat Transport in Nanofluids," Heat Transfer Engineering, 30(14), pp. 1136-1150.
108. Daungthongsuk, W., and Wongwises, S., 2007, "A Critical Review of Convective Heat Transfer of Nanofluids," Renewable & Sustainable Energy Reviews, 11(5), pp. 797-817. (Pubitemid 44829992)
109. Yu, W. H., France, D. M., Routbort, J. L., and Choi, S. U. S., 2008, "Review and Comparison of Nanofluid Thermal Conductivity and Heat Transfer Enhancements," Heat Transfer Engineering, 29(5), pp. 432-460. (Pubitemid 351287612)
110. Murshed, S. M. S., Leong, K. C., and Yang, C., 2008, "Thermophysical and Electrokinetic Properties of Nanofluids - a Critical Review," Applied Thermal Engineering, 28(17-18), pp. 2109-2125.
111. Chandratilleke, T. T., Jagannatha, D., and Narayanaswamy, R., 2010, "Heat Transfer Enhancement in Microchannels with Cross-Flow Synthetic Jets," International Journal of Thermal Sciences, 49, pp. 504-513.
112. Miner, A., and Ghoshal, U., 2006, "Limits of Heat Removal in Microelectronic Systems," IEEE Transactions on Components and Packaging Technologies, 29(4), pp. 743-749. (Pubitemid 46417160)
113. Moriyama, K., Inoue, A., and Ohira, H., 1992, "Thermohydraulic Characteristics of Two-Phase Flow in Extremely Narrow Channels (the Frictional Pressure Drop and Void Fraction of Adiabatic Two-Component Two-Phase Flow)," Heat Transfer-Japanese Research, 21(8), pp. 823-837. (Pubitemid 23712337)
114. Bowers, M. B., and Mudawar, I., 1994, "High Flux Boiling in Low Flow Rate, Low Pressure Drop Mini-Channel and MicroChannel Heat Sinks," International Journal of Heat and Mass Transfer, 37(2), pp. 321-332.
115. Jiang, L., Wong, M., and Zohar, Y., 1999, "Phase Change in Microchannel Heat Sinks with Integrated Temperature Sensors," Journal of Microelectromechanical Systems, 8, pp. 358-365. (Pubitemid 30552562)
116. Hetsroni, G., Mosyak, A., and Segal, Z., 2000, "Nonuniform Temperature Distribution in Electronic Devices Cooled by Flow in Parallel Microchannels," Packaging of Electronic and Photonic Devices, EEP29, pp. 1-9.
117. Kandlikar, S. G., Tian, S., Steinke, M. E., and Campbell, L. A., 2001, "High-Speed Photographic Observation of Flow Boiling of Water in Parallel Mini-Channels," Proc. 2001 National Heat Transfer Conference (NHTC2001), June 10-12, 2001, Ananheim, CA, United States, 1, pp. 675-684.
118. Jacobi, A. M., and Thome, J. R., 2002, "Heat Transfer Model for Evaporation of Elongated Bubble Flows in Microchannels," Transactions of the ASME. Journal of Heat Transfer, 124, pp. 1131-1136. (Pubitemid 36144959)
119. Serizawa, A., Feng, Z., and Kawara, Z., 2002, "Two-Phase Flow in Microchannels," Experimental Thermal and Fluid Science, 26(6-7), pp. 703-714. (Pubitemid 35157229)
120. Hetsroni, G., Mosyak, A., Segal, Z., and Pogrebnyak, E., 2003, "Two-Phase Flow Patterns in Parallel Microchannels," International Journal of Multiphase Flow, 29(3), pp. 341-360. (Pubitemid 36360668)
121. Yen, T.-H., Kasagi, N., and Suzuki, Y., 2003, "Forced Convective Boiling Heat Transfer in Microtubes at Low Mass and Heat Fluxes," International Journal of Multiphase Flow, 29, pp. 1771-1792. (Pubitemid 37481740)
122. Kandlikar, S. G., 2003, "Methods for Stabilizing Flow in Channels and Systems Thereof." US Patent No. US7575046, Issued August 2009.
123. Kandlikar, S. G., 2004, "Heat Transfer Mechanisms During Flow Boiling in Microchannels," Transactions of the ASME. Journal of Heat Transfer, 126, pp. 8-16. (Pubitemid 38550312)
124. Steinke, M. E., and Kandlikar, S. G., 2004, "An Experimental Investigation of Flow Boiling Characteristics of Water in Parallel Microchannels," Journal of Heat Transfer, 126(4), pp. 518-526. (Pubitemid 39443850)
125. Mukherjee, A., and Kandlikar, S. G., 2005, "Numerical Simulation of Growth of a Vapor Bubble During Flow Boiling of Water in a Microchannel," Microfluidics and Nanofluidics, 1(2), pp. 137-145. (Pubitemid 40794906)
126. Kandlikar, S. G., Willistein, D. A., and Borrelli, J., 2005, Experimental Evaluation of Pressure Drop Elements and Fabricated Nucleation Sites for Stabilizing Flow Boiling in Minichannels and Microchannels. ASME.
127. Kosar, A., Kuo, C. J., and Peles, Y. P., 2006, "Suppression of Boiling Flow Oscillations in Parallel Microchannels by Inlet Restrictors," ASME Journal of Heat Transfer, 128(3), pp. 251-260.
128. Kandlikar, S. G., Kuan, W. K., Willistein, D. A., and Borrelli, J., 2006, "Stabilization of Flow Boiling in Microchannels Using Pressure Drop Elements and Fabricated Nucleation Sites," Transactions of the ASME. Journal of Heat Transfer, 128(4), pp. 389-96.
129. Kandlikar, S. G., 2006, "Nucleation Characteristics and Stability Considerations During Flow Boiling in Microchannels," Experimental Thermal and Fluid Science, 30, pp. 441-447.
130. Kosar, A., and Peles, Y., 2006, "Convective Flow of Refrigerant (R-123) across a Bank of Micro Pin Fins," International Journal of Heat and Mass Transfer, 49(17-18), pp. 3142-3155. (Pubitemid 43902821)
131. Kosar, A., Kuo, C.-J., and Peles, Y., 2005, "Boiling Heat Transfer in Rectangular Microchannels with Reentrant Cavities," International Journal of Heat and Mass Transfer, 48(23-24), pp. 4867-4886. (Pubitemid 41360539)
132. Armstrong, R. J., 1966, "The Temperature Difference in Nucleate Boiling," International Journal of Heat Mass Transfer, 9(10), pp. 1148-1149.
133. Hetsroni, G., Klein, D., Mosyak, A., Segal, Z., and Pogrebnyak, E., 2004, "Convective Boiling in Parallel Microchannels," Microscale Thermophysical Engineering, 8(4), pp. 403-421.
134. Qu, W., and Mudawar, I., 2004, "Transport Phenomena in Two-Phase Micro-Channel Heat Sinks," Journal of Electronic Packaging, Transactions of the ASME, 126 pp. 213-224. (Pubitemid 40134502)
135. Ribatski, G., Wojtan, L., and Thome, J. R., 2006, "An Analysis of Experimental Data and Prediction Methods for Two-Phase Frictional Pressure Drop and Flow Boiling Heat Transfer in Micro-Scale Channels," Experimental Thermal and Fluid Science, 31, pp. 1-19. (Pubitemid 44486653)
136. Shiferaw, D., Huo, X., Karayiannis, T. G., and Kenning, D. B. R., 2007, "Examination of Heat Transfer Correlations and a Model for Flow Boiling of R134a in Small Diameter Tubes," International Journal of Heat and Mass Transfer, 50, pp. 5177-5193. (Pubitemid 350180864)
137. Sun, L., and Mishima, K., 2009, "An Evaluation of Prediction Methods for Saturated Flow Boiling Heat Transfer in Mini-Channels," International Journal of Heat and Mass Transfer, 52, pp. 5323-5329.
138. Martin-Callizo, C., Plam, B., Owhaib, W., and Ali, R., 2010, "Flow Boiling Visualization of R-134a in a Vertical Channel of Small Diameter," Journal of Heat Transfer-Transactions of the ASME, 132(3).
139. Schilder, B., Man, S. Y. C., Kasagi, N., Hardt, S., and Stephan, P., 2010, "Flow Visualization and Local Measurement of Forced Convection Heat Transfer in a Microtube," Journal of Heat Transfer-Transactions of the Asme, 132(3).
140. Harirchian, T., and Garimella, S. V., 2009, "Effects of Channel Dimension, Heat Flux, and Mass Flux on Flow Boiling Regimes in Microchannels," International Journal of Multiphase Flow, 35(4), pp. 349-362.
141. Thome, J. R., Dupont, V., and Jacobi, A. M., 2004, "Heat Transfer Model for Evaporation in Microchannels. Part I: Presentation of the Model," International Journal of Heat and Mass Transfer, 47(14-16), pp. 3375-3385. (Pubitemid 38616311)
142. Zhang, Y., Utaka, Y., and Kashiwabara, Y., 2009, "Formation Mechanism and Characteristics of a Liquid Microlayer in Microchannel Boiling System," Proc. ASME 7th International Conference on Nanochannels, Microchannels and Minichannels (ICNMM2009), S. G. Kandlikar, et al., eds., Pohang, Korea.
143. Zhang, L., Koo, J.-M., Jiang, L., Asheghi, M., Goodson, K. E., Santiago, J. G., and Kenny, T. W., 2002, "Measurements and Modeling of Two-Phase Flow in Microchannels with Nearly Constant Heat Flux Boundary Conditions," J. Microelectromechanical Systems, 11(1).
144. Cooper, M. G., 1984, "Saturated Nucleate Pool Boiling-A Simple Correlation," University of Leeds, UK.
145. Qu, W. L., and Mudawar, I., 2003, "Flow Boiling Heat Transfer in Two-Phase Micro-Channel Heat Sinks-Ii. Annular Two-Phase Flow Model," International Journal of Heat and Mass Transfer, 46(15), pp. 2773-2784. (Pubitemid 36669406)
146. Kandlikar, S. G., 2010, "Similarities and Differences between Flow Boiling in Microchannels and Pool Boiling," Heat Transfer Engineering, 31, pp. 159-167.
147. Kandlikar, S. G., Kuan, W. K., and Mukherjee, A., 2005, "Experimental Study of Heat Transfer in an Evaporating Meniscus on a Moving Heated Surface," Journal of Heat Transfer, 127, pp. 244-252. (Pubitemid 40579036)
148. Myers, J. G., Yerramilli, V. K., Hussey, S. W., Yee, G. F., and Kim, J., 2005, "Time and Space Resolved Wall Temperature and Heat Flux Measurements During Nucleate Boiling with Constant Heat Flux Boundary Conditions," International Journal of Heat and Mass Transfer, 48, pp. 2429-2442. (Pubitemid 40599724)
149. Moghaddam, S., and Kiger, K., 2009, "Physical Mechanisms of Heat Transfer During Single Bubble Nucleate Boiling of Fc-72 under Saturation Conditions-I. Experimental Investigation," International Journal of Heat and Mass Transfer, 52, pp. 1284-1294.
150. Megahed, A., and Hassan, I., 2010, "Analytical Modeling of Annular Flow Boiling Heat Transfer in Mini-and Microchannel Heat Sinks," Journal of Heat Transfer-Transactions of the ASME, 132(4).
151. Qu, W., and Mudawar, I., 2003, "Flow Boiling Heat Transfer in Two-Phase Micro-Channel Heat Sinks-I. Experimental Investigation and Assessment of Correlation Methods," International Journal of Heat and Mass Transfer, 46(15), pp. 2755-71. (Pubitemid 36658968)
152. Peles, Y. P., and Haber, S., 2000, "A Steady State, One Dimensional, Model for Boiling Two Phase Flow in Triangular Micro-Channel," International Journal of Multiphase Flow, 26, pp. 1095-1115. (Pubitemid 30334534)
153. Consolini, L., and Thome, J. R., 2010, "A Heat Transfer Model for Evaporation of Coalescing Bubbles in Micro-Channel Flow," International Journal of Heat and Fluid Flow, 31(1), pp. 115-125.
154. Fogg, D. W., and Goodson, K. E., 2009, "Bubble-Induced Water Hammer and Cavitation in Microchannel Flow Boiling," Journal of Heat Transfer-Transactions of the ASME, 131(12).
155. Krishnamurthy, S., and Peles, Y., 2010, "Flow Boiling Heat Transfer on Micro Pin Fins Entrenched in a Microchannel," Journal of Heat Transfer-Transactions of the ASME, 132(4).
156. Cheng, L., Bandarra, E. P., and Thome, J. R., 2008, "Nanofluid Two-Phase Flow and Thermal Physics: A New Research Frontier of Nanotechnology and Its Challenges," Journal of Nanoscience and Nanotechnology, 8(7), pp. 3315-3332.
157. Khanikar, V., Mudawar, I., and Fisher, T., 2009, "Effects of Carbon Nanotube Coating on Flow Boiling in a Micro-Channel," International Journal of Heat and Mass Transfer, 52(5), pp. 3805-3817.
158. Lee, J., and Mudawar, I., 2007, "Assessment of the Effectiveness of Nanofluids for Single-Phase and Two-Phase Heat Transfer in Micro-Channels," International Journal of Heat and Mass Transfer, 50(3-4), pp. 452-463. (Pubitemid 44881032)
159. Ahn, H. S., Kim, H., Jo, H., Kang, S., Chang, W., and Kim, M. H., 2010, "Experimental Study of Critical Heat Flux Enhancement During Forced Convective Flow Boiling of Nanofluid on a Short Heated Surface," International Journal of Multiphase Flow, 36(5), pp. 375-384.
160. Wu, H. Y., and Cheng, P., 2003, "Visualization and Measurements of Periodic Boiling in Silicon Microchannels," International Journal of Heat and Mass Transfer, 46(14), pp. 2603-2614. (Pubitemid 36610813)
161. Hetsroni, G., Mosyak, A., Pogrebnyak, E., and Segal, Z., 2005, "Explosive Boiling of Water in Parallel Micro-Channels," International Journal of Multiphase Flow, 31(4), pp. 371-392. (Pubitemid 40466032)
162. Kandlikar, S. G., 2004, "Heat Transfer Mechanisms During Flow Boiling in Microchannels," Transactions of the ASME. Journal of Heat Transfer, 126(11), pp. 8-16. (Pubitemid 38550312)
163. Brutin, D., and Tadrist, L., 2006, "Destabilization Mechanisms and Scaling Laws of Convective Boiling in a Minichannel," Journal of Thermophysics and Heat Transfer, 20(4), pp. 850-855. (Pubitemid 44747323)
164. Garrity, P. T., Klausner, J. F., and Mei, R., 2009, "Instability Phenomena in a Two-Phase Microchannel Thermosyphon," International Journal of Heat and Mass Transfer, 52(7-8), pp. 1701-1708.
165. Zhang, T., Tong, T., Chang, J.-Y., Peles, Y., Prasher, R., Jensen, M., Wen, J., and Phelan, P., 2009, "Ledinegg Instability in Microchannels," International Journal of Heat Mass Transfer, 52(25-26), pp. 5661-5674.
166. Zhang, T. J., Peles, Y., Wen, J. T., Tong, T., Chang, J. Y., Prasher, R., and Jensen, M. K., 2010, "Analysis and Active Control of Pressure-Drop Flow Instabilities in Boiling Microchannel Systems," International Journal of Heat and Mass Transfer, 53(11-12), pp. 2347-2360.
167. Tanaka, F., Hibiki, T., and Mishima, K., 2009, "Correlation for Flow Boiling Critical Heat Flux in Thin Rectangular Channels," Journal of Heat Transfer, 131(12), pp. 121003 (7 pp).
168. Kandlikar, S. G., expected 2010, "A Scale Based Theoretical Force Balance Model for Critical Heat Flux (CHF) During Flow Boiling in Microchannels and Minichannels," ASME Journal of Heat Tranfser.
169. Revellin, R., and Thome, J. R., 2008, "A Theoretical Model for the Prediction of the Critical Heat Flux in Heated Microchannels," International Journal of Heat and Mass Transfer, 51(5-6), pp. 1216-1225. (Pubitemid 351253549)
170. Qu, W., and Mudawar, I., 2004, "Measurement and Correlation of Critical Heat Flux in Two-Phase Micro-Channel Heat Sinks," International Journal of Heat and Mass Transfer, 47, pp. 2045-2059. (Pubitemid 38211608)
171. Katto, Y., and Ohno, H., 1984, "An Improved Version of the Generalized Correlation of Critical Heat Flux for the Forced Convective Boiling in Uniformly Heated Vertical Tubes," International Journal of Heat and Mass Transfer, 27(9), pp. 1641-1648. (Pubitemid 14647546)
172. Shah, M. M., 1987, "Improved General Correlation for Critical Heat Flux During Upflow in Uniformly Heated Vertical Tubes," International Journal of Heat and Fluid Flow, 8, pp. 326-335.
173. Kosar, A., and Peles, Y., 2007, "Critical Heat Flux of R-123 in Silicon-Based Microchannels," Journal of Heat Transfer, 129, pp. 844-851. (Pubitemid 47323363)
174. Park, J. E., and Thome, J. R., 2010, "Critical Heat Flux in Multi-Microchannel Copper Elements with Low Pressure Refrigerants," International Journal of Heat and Mass Transfer, 53(1-3), pp. 110-122.
175. Roday, A. P., and Jensen, M. K., 2009, "Study of the Critical Heat Flux Condition with Water and R-123 During Flow Boiling in Microtubes. Part Ii-Comparison of Data with Correlations and Establishment of a New Subcooled Chf Correlation," International Journal of Heat and Mass Transfer, 52, pp. 3250-3256.
176. Zhang, W., Hibiki, T., Mishima, K., and Mi, Y., 2006, "Correlation of Critical Heat Flux for Flow Boiling of Water in Mini-Channels," International Journal of Heat and Mass Transfer, 49, pp. 1058-1072. (Pubitemid 43267717)
177. Kosar, A., Peles, Y., Bergles, A. E., and Cole, G. S., 2009, "Experimental Investigation of Critical Heat Flux in Microchannels for Flow-Field Probes," Proc. ASME Seventh International Conference on Nanochannels, Microchannels, and Minichannels, Pohang, South Korea.
178. Kandlikar, S. G., 2010, "Scale Effects on Flow Boiling Heat Transfer in Microchannels: A Fundamental Perspective," International Journal of Thermal Sciences, 49(7), pp. 1073-1085.
179. Palmer, H. J., 1976, "The Hydrodynamic Stability of Rapidly Evaporating Liquids at Reduced Pressure," Journal of Fluid Mechanics, 75(3), pp. 487-511.
180. Sefiane, K., Benielli, D., and Steinchen, A., 1998, "A New Mechanism for Pool Boiling Crisis, Recoil Instability and Contact Angle Influence," Colloids and Surfaces A: Physicochemical and Engineering Aspects, 142(2-3), pp. 361-373. (Pubitemid 28529159)
181. Kim, M.-H., Lee, S., Mehendale, S., and Webb, R. L., 2003, Advances in Heat Transfer, Elsevier, San Deigo.
182. Zhang, L. K., Goodson, K. E., and Kenny, T. W., 2004, Silicon Microchannel Heatsinks: Theories and Phenomena., Springer-Verlag, Berlin.
183. Hsu, Y. Y., and Graham, R. W., 1961, "An Analytical and Experimental Study of the Thermal Boundary Layer and Ebullition Cycle in Nucleate Boiling."
184. Celata, G. L., 2004, Series in Thermal & Fluid Phys. & Eng, Begell House, New York City.
185. Kandlikar, S. G., Garimella, S., Li, D., Colin, S., and King, M. R., 2006, Heat Transfer and Fluid Flow in Minichannels and Microchannels, Elsevier, Kidlington, Oxford, UK.
186. Yarin, L. P., Mosyak, A., and Hetsroni, G., 2009, Fluid Flow, Heat Transfer and Boiling in Micro-Channels, Springer-Verlag, Berlin.