Critical heat flux of R-123 in silicon-based microchannels

Journal of Heat Transfer

Volumn 129, Issue 7, 2007, Pages 844-851

  Koşar, Ali ^a   Peles, Yoav ^a  

^a RENSSELAER POLYTECHNIC INSTITUTE   (United States)

Author keywords

Boiling; Critical heat flux; Flow pattern; MEMS; Microchannels

Indexed keywords

FLOW PATTERNS; HEAT FLUX; MASS TRANSFER; MICROCHANNELS; VELOCITY;

MASS VELOCITY; SILICON-BASED MICROCHANNEL HEAT SINK; SYSTEM PRESSURE;

HEAT SINKS;

FLOW PATTERNS; HEAT FLUX; HEAT SINKS; MASS TRANSFER; MICROCHANNELS; VELOCITY;

EID: 34548273479     PISSN: 00221481     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2712852     Document Type: Article

References (30)

1. Lee, C. H., and Mudawar, I., 1988, "A Mechanistic Critical Heat Flux Model for Subcooled Flow Boiling Based on Local Bulk Flow Conditions," Int. J. Multiphase Flow, 14, pp. 711-728.
2. Weisman, J., 1992, "The Current Status of Theoretically Based Approaches to the Prediction of the Critical Heat Flux in Flow Boiling," Nucl. Technol., 99, pp. 1-21.
3. Katto, Y., 1994, "Critical Heat Flux," Int. J. Multiphase Flow, 20, pp. 563-590.
4. Vandervort, C. L., Bergles, A. E., and Jensen, M. K., 1994, "An Experimental Study of Critical Heat Flux in Very High Heat Flux Subcooled Boiling," Int. J. Heat Mass Transfer, 37(Supp), pp. 161-173.
5. Celata, G. P., Cumo, M., and Mariani, A., 1994, "Assessment of Correlations and Models for the Prediction of CHF in Subcooled Flow Boiling," Int. J. Heat Mass Transfer, 37(2), pp. 237-255.
6. Bowers, M. B., and Mudawar, I., 1994, "High Flux Boiling in Low Flow Rate, Low Pressure Drop Mini-Channel and Micro-Channel Heat Sinks," Int. J. Heat Mass Transfer, 37(2), pp. 321-334.
7. Ammerman, C. N., and You, W. M., 2001, "Enhancing Small-Channel Convective Boiling Performance Using a Microporous Surface Coating," ASME J. Heat Transfer, 123(5), pp. 976-983.
8. Kandlikar, S. G., 2004, "Heat Transfer Mechanisms During Flow Boiling in Microchannels," ASME J. Heat Transfer, 126(1), pp. 8-16.
9. Qu, W., and Mudawar, I., 2004, "Measurement and Correlation of Critical Heat Flux in Two-Phase Micro-Channel Heat Sinks," Int. J. Heat Mass Transfer, 47, pp. 5749-5763.
10. Bergles, A. E., and Kandlikar, S. G., 2005, "On the Nature of Critical Heat Flux in Microchannels," ASME J. Heat Transfer, 127, pp. 101-107.
11. Koşar, A., Kuo, C. J., and Peles, Y., 2005, "Boiling Heat Transfer in Rectangular Microchannels With Reentrant Cavities," Int. J. Heat Mass Transfer, 48, pp. 4867-4886.
12. Koşar, A., Kuo, C. J., and Peles, Y., 2005, "Reduced Pressure Boiling Heat Transfer in Rectangular Microchannels With Interconnected Reentrant Cavities," ASME J. Heat Transfer, 127, pp. 1106-1114.
13. Koşar, A., Kuo, C. J., and Peles, Y., 2006, "Suppression of Boiling Flow Oscillations in Parallel Microchannels by Inlet Restrictors," ASME J. Heat Transfer, 128, pp. 251-260.
14. Harurama, Y, and Katto, Y., 1983, "New Hydrodynamic Model of Critical Heat Flux Applicable Widely to Both Pool and Forced Convection Boiling on Submerged Bodies in Saturated Liquids," Int. J. Heat Mass Transfer, 26, pp. 379-399.
15. Dhir, V. K., and Liaw, S. P., 1989, "Framework for a Unified Model for Nucleate and Transition Pool Boiling," ASME J. Heat Transfer, 111, pp. 739-746.
16. Sadasivan, P., Unal, C., and Nelson, R., 1995, "Perspective: Issues in CHF Modeling - The Need for New Experiments," ASME J. Heat Transfer, 117, pp. 558-567.
17. Golobič, I., and Bergles, A. E., 1997, "Effects of Heater-Side Factors on the Saturated Pool Boiling Critical Heat Flux," Experimental Thermal and Fluid Science 1997, Elsevier, New York, pp. 43-51.
18. Howard, A. H., and Mudawar, I., 1999, "Orientation Effects on Pool Boiling Critical Heat Flux (CHF) and Modeling of CHF for Near-Vertical Surfaces," Int. J. Heat Mass Transfer, 42, pp. 1665-1688.
19. Kandlikar, S. G., 2001, "A Theoretical Model to Predict Pool Boiling CHF Incorporating Effects of Contact Angle and Orientation," ASME J. Heat Transfer, 123, pp. 1071-1079.
20. Collier, J. G., and Thome, J. R., 1994, Convective Boiling and Condensation, 3rd ed., Oxford Science Publications, Oxford.
21. Kandlikar, S. G., 2002, "Fundamental Issues Related to Flow Boiling in Minichannels and Microchannels," Exp. Therm. Fluid Sci., 26, pp. 389-407.
22. Qu, W., and Mudawar, I., 2003, "Flow Boiling Heat Transfer in Two-phase Micro-Channel Heat Sink - I. Experimental Investigation and Assessment of Correlation Methods," Int. J. Heat Mass Transfer, 46(15), pp. 2755-2771.
23. Bergles, A. E., Lienhard, J. H., Kendall, G. E., and Griffith, P., 2003, "Boiling and Evaporation in Small Diameter Channels," Heat Transfer Eng., 24(1), pp. 18-40.
24. Thome, J. R., 2004, "Boiling in Microchannels: A Review of Experiment and Theory," Int. J. Heat Fluid Flow, 25, pp. 128-139.
25. Kline, S., and McClintock, F. A., 1953, "Describing Uncertainties in Single-Sample Experiments," Mech. Eng. (Am. Soc. Mech. Eng.), 75(1), pp. 3-8.
26. Cornwell, K., and Kew, P. A., 1992, "Boiling in Small Parallel Channels," Energy Efficiency Process Technol., 37(2), pp. 624-638.
27. Celata, G. P., and Mariani, A., 1999, CHF and Post-CHF (Post-Dryout) Heat Transfer-Handbook of Phase Change: Boiling and Condensation, Taylor&Francis, New York pp. 443-493.
28. Carey, V. P., 1992, Liquid-Vapor Phase Change Phenomena, Hemisphere, New York, pp. 483-564.
29. Katto, Y., and Ohne, H., 1984, "An Improved Version of the Generalized Correlation of Critical Heat Flux for Convection Boiling in Uniformly Heated Vertical Tubes," Int. J. Heat Mass Transfer, 27(9), pp. 1641-1648.
30. Shah, M. M., 1987, "Improved General Correlation for Critical Heat Flux During Upflow in Uniformly Heated Vertical Tubes," Int. J. Heat Fluid Flow, 8(4), pp. 326-335.