Flow boiling heat transfer on micro pin fins entrenched in a microchannel

Journal of Heat Transfer

Volumn 132, Issue 4, 2010, Pages 1-10

  Krishnamurthy, Santosh ^a   Peles, Yoav ^a  

^a RENSSELAER POLYTECHNIC INSTITUTE   (United States)

Author keywords

Flow maps; Heat transfer coefficient; Micro pin fins

Indexed keywords

A-THERMAL; ANNULAR FLOWS; AXIAL DISTANCE; BOILING NUMBER; FLOW BOILING; FLOW BOILING HEAT TRANSFER; FLOW MAPS; HYDRAULIC DIAMETER; IN-LINE; ISOLATED BUBBLES; LOCAL HEAT TRANSFER COEFFICIENT; MASS FLUX; MICRO PIN FINS; MULTIPLE FLOWS; PIN-FINS; SINGLE-PHASE FLOW; SUB-COOLED BOILING; WALL HEAT FLUX;

FLOW PATTERNS; FLOW VISUALIZATION; FORCED CONVECTION; HEAT EXCHANGERS; HEAT FLUX; HEAT TRANSFER COEFFICIENTS; MICROCHANNELS;

FINS (HEAT EXCHANGE);

EID: 77955300527     PISSN: 00221481     EISSN: 15288943     Source Type: Journal    
DOI: 10.1115/1.4000878     Document Type: Article

References (37)

1. Qu, W., and Siu-Ho, A., 2008, "Liquid Single-Phase in an Array of Micro-Pin-Fin-Part I: Heat Transfer Characteristics," ASME J. Heat Transfer, 130(12), p. 122402.
2. Qu, W., and Siu-Ho, A., 2008, "Liquid Single-Phase in an Array of Micro-Pin-Fin-Part II: Pressure Drop Characteristics," ASME J. Heat Transfer, 130(12), p. 124501.
3. Krishnamurthy, S., and Peles, Y., 2008, "Flow Boiling of Water in a Circular Staggered Micro-Pin Fin Heat Sink," Int. J. Heat Mass Transfer, 51(5-6), pp. 1349-1364.
4. Siu-Ho, A., Qu, W., and Pfefferkorn, F., 2007, "Experimental Study of Pressure Drop and Heat Transfer in a Single-Phase Micropin-Fin Heat Sink," ASME J. Electron. Packag., 129(4), pp. 479-487.
5. Cognata, T.J., Hollingsworth, K.D., and Witte, L.C., 2007, "High-Speed Visualization of Two-Phase Flow in a Micro-Scale Pin-Fin Heat Exchanger," Heat Transfer Eng., 28(10), pp. 861-869.
6. Prasher, R.S., Dirner, J., Chang, J.-Y., Myers, A., Chau, D., He, D., and Prstic, S., 2007, "Nusselt Number and Friction Factor of Staggered Arrays of Low Aspect Ratio Micropin-Fins Under Cross Flow for Water as Fluid," ASME J. Heat Transfer, 129(2), pp. 141-153.
7. Koşar, A., and Peles, Y., 2006, "Convective Flow of Refrigerant (R-123) Across a Bank of Micro Pin Fins," Int. J. Heat Mass Transfer, 49, pp. 3142-3155.
8. Krishnamurthy, S., and Peles, Y., 2007, "Gas-Liquid Two-Phase Flow Across a Bank of Micro Pillars," Phys. Fluids, 19(4), p. 043302.
9. Koşar, A., and Peles, Y., 2007, "Boiling Heat Transfer in a Hydrofoil-Based Micro Pin Fin Heat Sink," Int. J. Heat Mass Transfer, 50(5-6), pp. 1018-1034.
10. Koşar, A., and Peles, Y., 2007, "Micro Scale Pin Fin Heat Sinks Parametric Performance Evaluation Study," IEEE Trans. Compon. Packag. Technol., 30(4), pp. 855-865.
11. Siu-Ho, A.M., Qu, W., and Pfefferkorn, F.E., 2006, "Pressure Drop and Heat Transfer in a Single-Phase Micro-Pin-Fin Heat Sink," ASME Paper No. IM-ECE2006 14777.
12. Krishnamurthy, S., and Peles, Y., 2008, "Two-Phase Flow Pattern Transition Across Micropillars Size Scale Effect at the Micro Scale," Phys. Fluids, 2, p. 023602.
13. Bjorg, R.W., Hall, G.R., and Rohsenow, W.M., 1982, "Correlation of Forced Convection Boiling Heat Transfer Data," Int. J. Heat Mass Transfer, 25, pp. 753-757.
14. Bowring, R.W., 1962, "Physical Model Based on Bubble Detachment and Calculation of Steam Voidage in the Subcooled Region of a Heated Channel," Institutt for Atomenergi, Halden, Norway, Paper No. Hpr-10.
15. Bergles, A.E., and Rohsenow, W.M., 1964, "The Determination of Forced Convection, Surface Boiling Heat Transfer," ASME J. Heat Transfer, 86, pp. 365-372.
16. Kutateladze, S.S., 1961, "Boiling Heat Transfer," Int. J. Heat Mass Transfer, 4, pp. 31-45.
17. Kandlikar, S.G., 1998, "Heat Transfer and Flow Characteristics in Partial Boiling, Fully Developed Boiling, and Significant Void Flow Regions of Sub-cooled Flow Boiling," ASME J. Heat Transfer, 120, pp. 395-401.
18. Rouhani, S.Z., and Axelsson, E., 1970, "Calculation of Void Volume Fraction in the Subcooled and Quality Boiling Regions," Int. J. Heat Mass Transfer, 13, pp. 383-393.
19. Lahey, R.T., 1978, "A Mechanistic Subcooled Boiling Model," Proceedings of the Sixth International Heat Transfer Conference, Vol. 1, Toronto, Canada, pp. 292-297.
20. Del Valle, V H. M., and Kenning, D.B.R., 1985, "Subcooled Flow Boiling at High Heat Flux," Int. J. Heat Mass Transfer, 28, pp. 1907-1920.
21. Basu, N., Warrier, G.R., and Dhir, V K., 2005, "Wall Heat Flux Partitioning During Subcooled Flow Boiling-Part I: Model Development," ASME J. Heat Transfer, 127, pp. 131-140.
22. Basu, N., Warrier, G.R., and Dhir, V K., 2005, "Wall Heat Flux Partitioning During Subcooled Flow Boiling-Part II: Model Validation," ASME J. Heat Transfer, 127, pp. 141-148.
23. Warrier, G.R., and Dhir, V K., 2006, "Heat Transfer and Wall Heat Flux Partitioning During Subcooled Flow Nucleate Boiling, A Review," ASME J. Heat Transfer, 128, pp. 1243-1256.
24. Huang, L.-D., and Witte, L., 2001, "Highly Subcooled Boiling in Crossflow," ASME J. Heat Transfer, 123, pp. 1080-1085.
25. Huang, H.L., and Witte, L.C., 1996, "An Experimental Investigation of the Effects of Subcooling and Velocity on Boiling of Freon-113," ASME J. Heat Transfer, 118, pp. 436-441.
26. Chen, J.C., 1966, "Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow," I&EC Process Des. Dev., 5(3), pp. 322-329.
27. Shah, M.M., 2005, "Improved General Correlation for Subcooled Boiling Heat Transfer During Flow Across Tubes and Tube Bundles," HVAC&R Res., 11(2), pp. 285-303.
28. Cornwell, K., 1990, "The Influence of Bubbly Flow on Boiling From aTube in a Bundle," Int. J. Heat Mass Transfer, 33(12), pp. 2579-2584.
29. Gupta, A., 2005, "Enhancement of Boiling Heat Transfer in a 5 × 3 Tube Bundle," Int. J. Heat Mass Transfer, 48, pp. 3763-3772.
30. Lee, P.C., Tseng, F.G., and Pan, C., 2004, "Bubble Dynamics in Micro Channels. Part I: Single Microchannel," Int. J. Heat Mass Transfer, 47, pp. 5575-5589.
31. Kuo, C.-J., Koşar, A., Peles, Y., Virost, S., Mishra, C., and Jensen, M., 2006, "Bubble Dynamics During Boiling in Enhanced Surface Microchannels," J. Microelectromech. Syst., 15(6), pp. 1514-1527.
32. Lie, Y., and Lin, T., 2006, "Subcooled Flow Boiling Heat Transfer and Associated Bubble Characteristics of R-134a in a Narrow Annular Duct," Int. J. Heat Mass Transfer, 49, pp. 2077-2089.
33. Martín-Callizo, C., Palm, B., and Owhaib, W., 2007, "Subcooled Flow Boiling of R-134a in Vertical Channels of Small Diameter," Int. J. Multiphase Flow, 33, pp. 822-832.
34. Han, C., and Griffith, P., 1965, "The Mechanism of Heat Transfer in Nucleate Pool Boiling, Bubble Initiation, Growth and Departure," Int. J. Heat Mass Transfer, 8, p. 887904.
35. Mikic, B.B., and Rohsenow, W.M., 1969, "A New Correlation of Pool-Boiling Data Including the Effect of Heating Surface Characteristics," ASME J. Heat Transfer, 44(14), pp. 245-250.
36. Krishnamurthy, S., and Peles, Y., 2010, "Flow Boiling on Micropin Fins Entrenched Inside a Microchannel-Flow Patterns and Bubble Departure Diameter and Bubble Frequency," ASME J. Heat Transfer, 132(4), p. 041002.
37. Donnelly, B., O'Donovan, T.S., and Murray, D.B., 2009, "Surface Heat Transfer Due to Sliding Bubble Motion," Appl. Therm. Eng., 29(7), pp. 1319-1326.