Boiling and two-phase flow in channels with extremely small dimensions: A review of Japanese research

Microfluidics and Nanofluidics

Volumn 1, Issue 2, 2005, Pages 94-107

  Ohta, Haruhiko ^a  

^a KYUSHU UNIVERSITY   (Japan)

Author keywords

Boiling; Critical heat flux; Microchannel; Minichannel; Two phase flow

Indexed keywords

BOILING LIQUIDS; CHANNEL FLOW; HEAT EXCHANGERS; HEAT FLUX; MICROELECTRONICS; MICROPROCESSOR CHIPS; PRESSURE DROP; TWO PHASE FLOW;

CRITICAL HEAT FLUX; MICROCHANNEL; MINICHANNEL;

MICROELECTROMECHANICAL DEVICES;

EID: 20444421179     PISSN: 16134982     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10404-004-0018-3     Document Type: Review

References (75)

1. Abe Y, Iwasaki A (2002) Study on the boiling bubble of self-wetting fluid in microgravity. In: Proceedings of the 2002 JSME thermal engineering conference, Okinawa, Japan, November 2002, pp 291-292
2. Armand AA (1946) Resistance to two-phase flow in horizontal tubes (in Russian). Izvest V Teplotech Inst 15(1):16-23
3. Awane M, Kuramoto T, Yoshida K, Okawa T, Kataoka I (2002) Pressure drop on liquid transportation using the characteristics of gas-liquid two-phase flow in micro channel (in Japanese). In: Proceedings of the 2002 JSME thermal engineering conference, Okinawa, Japan, November 2002, B163:83-84
4. Baduge S, Kaminaga F, Matsumura K, Tanifuji D (2001) Pressure effect on boiling heat transfer characteristics in a small diameter tube. In: Proceedings of the 38th national heat transfer symposium of Japan, Omiya, Japan, May 2001, vol I, G136:303-304
5. Chisholm D, Laird ADK (1958) Two-phase flow in rough tubes. Trans ASME 80(2):276-286
6. Collier JR, Thome JR (1994) Convective boling and condensation, 3rd edn. Oxford Science Publications
7. Dougall WM, Rohsenow RS (1963) Film boiling on the inside of vertical tubes with upward flow of fluid at low qualities. Department of Mechanical Engineering, Massachusetts Institute of Technology, technical report 9079-26
8. Fujita Y, Fujita N (2003) Flow boiling heat transfer in a uniformly heated horizontal tube of small diameter (in Japanese). In: Proceedings of the 40th national heat transfer symposium of Japan, Hiroshima, Japan, May 2003, vol III, D312
9. Fujita Y, Yang Y (2002) Flow boiling in narrow channels. In: Proceedings of the 39th national heat transfer symposium of Japan, Sapporo, Japan, June 2002, vol II, F234:511-512
10. Fujita Y, Yang Y (2003) Flow boiling in narrow channels (2nd report: flow patterns and heat transfer). In: Proceedings of the 40th national heat transfer symposium of Japan, Hiroshima, Japan, May 2003, vol III, D311
11. Fujita Y, Yang Y, Fujita N (2003) Boiling heat transfer in a narrow rectangular channel of small aspect ratio. In: Proceedings of the 6th ASME-JSME thermal engineering joint conference, Hapuna, Hawaii, March 2003, TED-AJ03-146
12. Fukano T, Kariyasaki A (1993) Characteristics of gas-liquid two-phase flow in a capillary tube. Nucl Eng Des 141:59-68
13. Groeneveld DC, Delorme GGJ (1976) Prediction of thermal non-equilibrium in the post-dryout regime. Nucl Eng Des 36:17-26
14. Honda H, Wei JJ (2003) Advances in enhanced boiling heat transfer from electronic components. In: Proceedings of the 6th ASME-JSME thermal engineering joint conference, Hapuna, Hawaii, March 2003, TED-AJ03-KN8
15. Honda H, Wei JJ, Takamatsu H, Yamashiro H (2003) Heat transfer characteristics of a natural circulation liquid cooling system for electronic components. In: Proceedings of the 6th ASME-JSME thermal engineering joint conference, Hapuna, Hawaii, March 2003, TED-DJ03-122
16. Honma Y, Katsuta M, Hosoya N, Shindo T, Sotani W, Kimura Y, Nakamura Y (2002) Heat transfer characteristics in flat plate micro heat pipe (in Japanese). In: Proceedings of the 39th national heat transfer symposium of Japan, Sapporo, Japan, June 2002, vol I, D144:149-150
17. Ide H, Fukano T (2003) Experimental investigation of the effect of surface tension and the correlations on void fraction and frictional pressure drop of an air-liquid two-phase flow in a horizontal flat capillary rectangular channel. In: Proceedings of the 1st international conference on microchannels and minichannels (ICMM 2003), Rochester, New York, April 2003, 1066:535-542
18. Ide H, Matsumura H, Fukano T (1999) Correlation of holdup in air-water two-phase flow in vertical capillary rectangular channels. In: Proceedings of the 3rd ASME-JSME joint fluids engineering division summer meeting (FEDSM'99), San Francisco, California, July 1999, 7840:1-10
19. Inoue T, Hongo A, Nakabeppu O (2002) Dissolved-gas effect on bubble generation from microheater (in Japanese). In: Proceedings of the 39th national heat transfer symposium of Japan, Sapporo, Japan, June 2002, vol I, E111:153-154
20. Ippohshi S, Ogushi T (2003) Development of an active heat spreader (in Japanese). In: Proceedings of the 6th ASME-JSME thermal engineering joint conference, Hapuna, Hawaii, March 2003, C213:399-400
21. Kaji M, Sekoguchiand K, Mori K (1994) An experimental study of momentum and heat transfer analogy in gas-liquid two-phase flow. In: Proceedings of the international symposium on heat and mass transfer, Kyoto, Japan, November 1994, pp 159-164
22. Kaji M, Sawai T, Mori K (2003) Analogy between heat transfer and fluid friction of gas-liquid two-phase flow in microchannel. In: Proceedings of the 1st international conference on microchannels and minichannels (ICMM 2003), Rochester, New York, April 2003, 1068:551-558
23. Kaminaga F, Baduge S, Matsumura K (2003) Pressure drop in a capillary tube in boiling two-phase flow. In: Proceedings of the 1st international conference on microchannels and minichannels (ICMM 2003), Rochester, New York, April 2003, 1080:635-642
24. Kandlikar SG (2003) Heat transfer mechanisms during flow boiling in microchannels. In: Proceedings of the 1st international conference on microchannels and minichannels (ICMM 2003), Rochester, New York, April 2003, 1005: 33-46
25. Kawahara A, Sadatomi M, Okayama K, Kawaji M (2003) Effects of liquid properties on pressure drop of two-phase gas-liquid flows through a microchannel. Ther Sci Eng 11(6):25-33
26. Kim JH, Okuyama K, Iida Y (2002) Allowable repetition frequency of pulse heating in microactuators using rapid boiling (in Japanese). In: Proceedings of the 39th national heat transfer symposium of Japan, Sapporo, Japan, June 2002, vol III, G321:761-762
27. Koito Y, Motomatsu K, Imura H, Mochizuki M, Saito Y (2003) Heat transfer characteristics on heat sinks with a vapor chamber (in Japanese). In: Proceedings of the 40th national heat transfer symposium of Japan, Hiroshima, Japan, May 2003, vol I, p I132
28. Koizumi Y, Fujita Y, Ohtake H (2001) Heat transfer and critical heat flux of forced flow boiling in vertical narrow annular passages (in Japanese). In: Proceedings of the 38th national heat transfer symposium of Japan, Omiya, Japan, May 2001, vol II, G231:595-596
29. Kondo Y (2003) The first laptop personal computer using a silent liquid-cooling system (in Japanese). In: Proceedings of the 6th ASME-JSME thermal engineering joint conference, Hapuna, Hawaii, March 2003, C141:101-104
30. Koyama S, Kuwahara K, Shinmura E (2001) Experimental study on flow boiling of CO 2 in a small diameter tube (in Japanese). In: Proceedings of the 4th JSME-KSME thermal engineering joint conference, Kobe, Japan, D104:147-148
31. Koyama S, Nakashita K, Kuwahara K, Yamamoto K (2002) Condensation of HFC134a in multi-port extruded tubes (in Japanese). In: Proceedings of the 39th national heat transfer symposium of Japan, Sapporo, Japan, June 2002, vol I, F114:199-200
32. Koyama S, Kazari K, Kuwahara K (2003) Experimental on flow boiling heat transfer of R134a in a multi-port extruded tube (in Japanese). In: Proceedings of the 40th national heat transfer symposium of Japan, Hiroshima, Japan, May 2003, vol III, D313
33. Kuramoto T, Kataoka I, Matumoto T, Okawa T, Yoshida K (2001) Study on liquid transportation using characteristics of gas-liquid two-phase flow in micro-channel (in Japanese). In: Proceedings of the 4th JSME-KSME thermal engineering joint conference, Kobe, Japan, G212:627-628
34. Lee HJ, Lee SY (2001) Pressure drop correlations for two-phase flow within horizontal rectangular channels with small height. Int J Multiphase Flow 27:783-796
35. Lockhart RW, Martinelli RC (1949) Proposed correlation of data for isothermal two-phase two-component flow in pipes. Chem Eng Prog 45:39-48
36. Mishima K, Hibiki T (1996) Some characteristics of air-water two-phase flow in small diameter vertical tubes. Int J Multiphase Flow 22:703-712
37. Miyazaki Y (2002) Study on oscillating heat pipe (pressure oscillating and heat transport) (in Japanese). In: Proceedings of the 39th national heat transfer symposium of Japan, Sapporo, Japan, June 2002, vol I, D142:145-146
38. Miyazaki Y, Akachi H (2001) Study on oscillating heat pipe (in Japanese). In: Proceedings of the 38th national heat transfer symposium of Japan, Omiya, Japan, May 2001, vol III, D313:735-736
39. Murayama M, Inoue T, Suzuki Y (2002) Experimental study on self-excited oscillating heat pipe for space application (in Japanese). In: Proceedings of the 39th national heat transfer symposium of Japan, Sapporo, Japan, June 2002, vol I, D145:151-152
40. Nagata S, Nishio S, Shirakashi R, Baba S (2001) Heat transport characteristics of SEMOS heat pipe (in Japanese). In: Proceedings of the 38th national heat transfer symposium of Japan, Omiya, Japan, May 2001, vol III, D311:731-732
41. Nakabeppu O, Seki K (2003) Heat transport device with bubble drive micropump (in Japanese). In: Proceedings of the 40th national heat transfer symposium of Japan, Hiroshima, Japan, May 2003, vol I, I122
42. Nasu H, Suzuki Y, Kasagi N (2003) Fabrication of prototype testbench for forced convective boiling in microchannel (in Japanese). In: Proceedings of the 40th national heat transfer symposium of Japan, Hiroshima, Japan, May 2003, vol II, p A214
43. Nishio S, Nagata S, Kubota T (2002) Study of thermal perfomance of SEMOS heat pipe (in Japanese). In: Proceedings of the 39th national heat transfer symposium of Japan, Sapporo, Japan, June 2002, vol I, D122:127-128
44. Nishio S (2003) Single-phase laminar-flow heat transfer and two-phase flow oscillating-flow heat transport in microchannel. In: Proceedings of the 1st international conference on microchannels and minichannels (ICMM 2003), Rochester, New York, April 2003, 1014:129-140
45. Ohta H, Fujiyama H (1999) Local heat transfer measurement and visualization of liquid-vapor behavior developed for microgravity flow boiling experiments. In: Celata GP, Di Marco P, Shah RK (eds) Proceedings of the 2nd international symposium on two-phase flow modelling and experimentation, Pisa, Italy, May 1999, 1:255-262
46. Ohta H, Shinmoto Y, Ohno T, Okamato A (2002a) Development of high-performance space cold plate by improved liquid supply for flow boiling in narrow gaps. Thermal Sci Eng 10(6):39-44
47. Ohta H, Shinmoto Y, Matsunaga K (2002b) Effect of gravity on flow boiling in narrow ducts and enhancement of CHF values. In: Proceedings of the 12th international heat transfer conference, Grenoble, France, August 2002, 3:725-730
48. Ohta H, Kawasaki H, Toyama S, Mori M, Hirai S, Saito S, Morita N, Ohno T, Higashijima M, Shinmoto Y (2004) A study on the feasibility of heat transfer and transport from generator/transmitter combined units of assumed 10 MW SSPS. In: Proceedings of the conference on solar power space (SPS 2004), Granada, Spain, June/July 2004
49. Okuyama K, Takehara R, Kim JH, Iida Y (2002a) Micropump using boiling propagation phenomena (in Japanese). In: Proceedings of the 39th national heat transfer symposium of Japan, Sapporo, Japan, June 2002, vol I, E113:157-158
50. Okuyama K, Tsukahara S, Morita N, Iida Y (2002b) Behavior of boiling bubbles rapidly generated on the small heater of a thermal ink jet printhead (in Japanese). In: Proceedings of the 2002 JSME thermal engineering conference, Okinawa, Japan, November 2002, 02-22, A251:319-320
51. Osada H, Yamamoto K, Kawakubo M (2003) Boiling heat transfer of refrigerant CO 2 in microchannel tubes (in Japanese). In: Proceedings of the 40th national heat transfer symposium of Japan, Hiroshima, Japan, May 2003, vol I, p G153
52. Premoli A, Francesco D, Prina A (1971) A dimensionless correlation for determining the density of two-phase mixtures. Lo Termotecnica 25:17-26
53. Qiu S, Takahashi M, Su G, Jia D (2002) Experimental study on post-dryout heat transfer in vertical narrow annuli (in Japanese). In: Proceedings of the 39th national heat transfer symposium of Japan, Sapporo, Japan, June 2002, vol II, F223:499-500
54. Rainey KN, You SM (2000), Pool boiling heat transfer from plain and microporous, square pin-finned surfaces in saturated FC-72. Trans ASME J Heat Transfer 122:509-516
55. Rite RW, Rezkallah KS (1993) Heat transfer coefficients during two-phase, gas-liquid flow in a circular tube under microgravity conditions. In: Proceedings of the 28th AIAA thermophysics conference, Orlando, Florida, July 1993, AIAA-93-2851
56. Rohsenow WM (1952) A method of correlating heat transfer data for surface boiling of liquid. Trans ASME 76:969-976
57. Sawai T, Kaji M, Kato Y, Nakajima T (2002) Flow orientation and frictional pressure gradient in narrow rectangular channel (in Japanese). In: Proceedings of the JSMF annual meeting, Nagoya, Japan, July 2002, E205:141-142
58. Seki K, Nakabeppu O, Tonosaki M, Hori K (2002) Operating characteristics of vapor bubble drive micropump (in Japanese). In: Proceedings of the 39th national heat transfer symposium of Japan, Sapporo, Japan, June 2002, vol III, G323:765-766
59. K Sekoguchi Z Han M Kaji T Imasaka Y Sumiyoshi 1992 An analogy between heat transfer and pressure drop in forced convective boiling flow In: Dynamics of two-phase flows CRC Press Boca Raton, Florida 669-688
60. Shinmoto Y, Ohno T, Yoshida T, Ohta H (2004) A method to increase CHF for forced convective boiling in narrow gaps applied to heat sinks for semiconductors with high heat generation rate. In: Proceedings of the 1st international symposium on micro & nano technology (ISMNT-1), Honolulu, Hawaii, March 2004, CD-ROM, p 6
61. Smith SL (1969) Void fraction in two-phase flow: A correlation based upon an equal velocity head model. Proc Inst Mech Eng, 184, Pt 1 36:647-664
62. Stephan K, Abdelsalam M (1980) Heat transfer correlations for natural convection boiling. Int J Heat Mass Transfer 23(1):73-87 10.1016/ 0017-9310(80)90140-4
63. Suzuki O (2000) Heat transfer characteristics of a bubble-driven capillary heat pipe (in Japanese). In: Proceedings of the 37th national heat transfer symposium of Japan, Kobe, Japan, May 2000, vol I, A144:35-36
64. Suzuki K, Kawamura H (2003) Microgravity experiment on boiling and applications: Research activity of advanced high heat flux cooling technology for electronic devices in Japan. In: Proceedings of the microgravity transport processes in fluid, thermal, biological and materials sciences conference III, Davos, Switzerland, September 2003, ECI paper no 90
65. Takahashi M, Qiu S (2003) Thermal-hydraulic characteristics of boiling water two-phase flow (in Japanese). In: Proceedings of the 40th national heat transfer symposium of Japan, Hiroshima, Japan, May 2003, vol II, A211
66. Takata N, Honda H, Wang Z (2003) Experimental study on natural circulation, evaporative cooling system for LSI chips (in Japanese). In: Proceedings of the 6th ASME-JSME thermal engineering joint conference, Hapuna, Hawaii, March 2003, D233:449-450
67. Tanaka S, Daiguzi H, Takemura F, Hihara E (2001) Boiling heat transfer of carbon dioxide in horizontal tubes (in Japanese). In: Proceedings of the 38th national heat transfer symposium of Japan, Omiya, Japan, May 2001, vol III, I337:899-890
68. Tasaki Y, Utaka Y (2003) Effect of surface properties on boiling heat transfer characteristics in a microchannel vaporizer. In: Proceedings of the 6th ASME-JSME thermal engineering joint conference, Hapuna, Hawaii, March 2003, TED-AJ03-541
69. Uchida S, Fujita Y (2001) Boiling heat transfer and flow patterns in a narrow vertical annulus (in Japanese). In: Proceedings of the 4th JSME-KSME thermal engineering joint conference, Kobe, Japan, B119:93-94
70. Utaka Y, Tasaki Y, Okuda S (2003) Measurement of micro layer thickness in microchannel vapor generator (in Japanese). In: Proceedings of the 40th national heat transfer symposium of Japan, Hiroshima, Japan, May 2003, vol I, G152
71. Yen TH, Nasu H, Kasagi N, Suzuki Y (2001) Forced convective boiling heat transfer in micro tubes. In: Proceedings of the 4th JSME-KSME thermal engineering joint conference, Kobe, Japan, G211:625-626
72. Yen TH, Kasagi N, Suzuki Y, Nasu H (2002) Forced convection boiling heat transfer and pressure loss characteristics in microtubes. In: Proceedings of the 39th national heat transfer symposium of Japan, Sapporo, Japan, June 2002, vol II, F221:495-496
73. Yokobori S, Iwaki C, Akinaga M, Watanabe F (2002) Boiling heat transfer characteristics in inclined narrow gap (in Japanese). In: Proceedings of the 39th national heat transfer symposium of Japan, Sapporo, Japan, June 2002, vol II, F225:503-504
74. Yu J, Momoki S, Koyama S (1999) Experimental study of surface effect on flow boiling heat transfer in horizontal smooth tubes. Int J Heat Mass Transfer 42:1909-1918
75. Zuber N, Findlay JA (1965) Average volumetric concentration in two-phase flow systems. Trans ASME Ser C 87:453-468