Similarities and differences between flow boiling in microchannels and pool boiling

Heat Transfer Engineering

Volumn 31, Issue 3, 2010, Pages 159-167

  Kandlikar, Satish G ^a  

^a Kate Gleason College of Engineering   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CRITICAL HEAT FLUX; DEVELOPING STRATEGY; DRY-OUT; ENHANCING HEAT TRANSFER; FLOW BOILING; HEAT TRANSFER ENHANCEMENT; HEAT TRANSFER MECHANISM; LIMITING FACTORS; LIQUID SLUG; MICROCHANNEL WALLS; POOL BOILING; SIMILARITIES AND DIFFERENCES;

BUBBLES (IN FLUIDS); HEAT EXCHANGERS; HEAT FLUX; HEAT TRANSFER COEFFICIENTS; LAKES;

MICROCHANNELS;

EID: 70449428441     PISSN: 01457632     EISSN: 15210537     Source Type: Journal    
DOI: 10.1080/01457630903304335     Document Type: Article

References (36)

1. Hsu, Y. Y., On the Size Range of Active Nucleation Cavities on a Heating Surface, Journal of Heat Transfer, vol.84, pp. 207-216, 1962.
2. Zhang, L., Wang, E. N., Goodson, K. E., and Kenny, T. W., Phase Change Phenomena in Silicon Microchannels, International Journal of Heat and Mass Transfer, vol.48, pp. 1572-1582, 2005.
3. Kandlikar, S. G., Kuan, K., Willistein, D. A., and Borrelli, J., Stabilization of Flow Boiling in Microchannels Using Pressure Drop Elements and Fabricated Nucleation Sites, Journal of Heat Transfer, vol.128, pp. 389-396, 2006.
4. Kandlikar, S. G., and Grande, W., Evolution of Microchannel Flow Passages-Thermohydraulic Performance and Fabrication Technology, Heat Transfer Engineering, vol.24, no.1, pp. 3-17, 2003.
5. Colgan, E. G., Furman, B., Gaynes, M., Graham, W., LaBianca, N., Magerlein, J. H., Polastre, R. J., Rothwell, M. B., Bezama, R. J., Choudhary, R., Marston, K., Toy, H., Wakil, J., Zitz, J., and Schmidt R., A Practical Implementation of Silicon Microchannel Coolers for High Power Chips, IEEE Transactions on Components and Packaging Technologies, vol.30, pp. 218-225, 2007.
6. Steinke, M. E., and Kandlikar, S. G., Single-Phase Liquid Heat Transfer in Plain and Enhanced Microchannels, Proceedings of the ASME 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, pp. 943-951, 2006.
7. Nukiyama, S., Translation-The Maximum and Minimum Values of Heat Q Transmitted from Metal to Boiling Water Under Atmospheric Pressure, International Journal of Heat and Mass Transfer, vol.9, pp. 1419-1433, 1966. Original article in Japanese Society of Mechanical Engineers, vol.37, pp. 367-374, 1934.
8. Das, S. K., Das, P. K., and Saha, P., Nucleate Boiling of Water from Plain and Structured Surfaces, Experimental Thermal and Fluid Science, vol.31, pp. 967-977, 2007.
9. Steinke, M. E., and Kandlikar, S. G., An Experimental Investigation of Flow Boiling Characteristics of Water in Parallel Microchannels, Journal of Heat Transfer, vol.126, 518-526, 2004.
10. Kuo, C.-J., and Peles, Y., Local Measurement of Flow Boiling in Structured Surface Microchannels, International Journal of Heat and Mass Transfer, vol.50, pp. 4513-4526, 2007.
11. Kenning, D. B. R., and Cooper, M. G., Saturated Flow Boiling of Water in Vertical Tubes, International Journal of Heat and Mass Transfer, vol.31, pp. 445-458, 1988.
12. Lazarek, G. M., and Black, S. H., Evaporative Heat Transfer, Pressure Drop and Critical Heat Flux in a Small Vertical Tube with R-113, International Journal of Heat and Mass Transfer, vol.25, pp. 945-960, 1982.
13. Kew, K., and Cornwell, K., Correlations for Prediction of Boiling Heat Transfer in Small Diameter Channels, Applied Thermal Engineering, vol.17, pp. 705-715, 1997.
14. Cooper, M. G., Saturated Nucleate Pool Boiling-A Simple Correlation, 1st UK National Heat Transactions, Conference, IChemE Symposium Series, vol.86, no.2, pp. 785-793, 1984.
15. Kandlikar, S. G., Development of a Flow Boiling Map for Sub- cooled and Saturated Flow Boiling of Different Fluids inside Circular Tubes, Journal of Heat Transfer, vol.113, no.1, pp. 190-200, 1991.
16. Kandlikar, S. G., A General Correlation for Two-Phase Flow Boiling Heat Transfer inside Horizontal and Vertical Tubes, Journal of Heat Transfer, vol.112, no.1, pp. 21-228, 1990.
17. Kandlikar, S. G., and Balasubramanian, P., An Extension of the Flow Boiling Correlation to Transition, Laminar and Deep Laminar Flows in Minichannels and Microchannels, Heat Transfer Engineering, 25, no.3, pp. 86-93, 2004.
18. Gnielinski, V., New Equations for Heat and Mass Transfer in Turbulent Pipe and Channel Flow, International Chemical Engineering, vol.16, pp. 359-368, 1976.
19. Serizawa, A., Feng, Z., and Kawara, Z., Two-Phase Flow in Mi- crochannels, Experimental Thermal and Fluid Science, vol.26, pp. 703-714, 2002.
20. Hetsroni, G., Mosyak, A., Pogrebnyak, E., and Segal, Z., Explosive Boiling in Parallel Microchannels, International Journal of Multiphase Flow, vol.31, pp. 371-392, 2005.
21. Kuo, C.-J., and Peles, Y., Flow Boiling Instabilities in Microchannels and Means for Mitigation by Reentrant Cavities, Journal of Heat Transfer, vol.130, article 072402, 10 pp., 2008.
22. Dong, T., Yang, Z., Bi, Q., and Zhang, Y., Freon R141b Flow Boiling in Silicon Microchannel Heat Sinks: Experimental Investigation, Heat Mass Transfer, vol.44, pp. 315-324, 2008.
23. Kandlikar, S. G., Scale Effects of Flow Boiling in Microchannels: A Fundamental Perspective, Keynote paper presented at the 7th International Conference on Boiling Heat Transfer, Florianopolis, Brazil, May 2-7, 2009.
24. Kandlikar, S. G., Kuan, W. K., and Mukherjee, A., Experimental Study of Heat Transfer in an Evaporating Meniscus on a Moving Heated Surface, Journal of Heat Transfer, vol.127, pp. 244-252, 2005. (Pubitemid 40579036)
25. Mukherjee, A., and Kandlikar, S. G., Numerical Study of an Evaporating Meniscus on a Moving Heated Surface, Journal ofHeat Transfer, vol.128, pp. 1285-1292, 2006.
26. Jacobi, A. M., and Thome, J. R., Heat Transfer Model for Evaporation of Elongated Bubble Flows in Microchannels. Journal of Heat Transfer, vol.124, pp. 1131-1136, 2002.
27. Mukherjee, A., and Kandlikar, S. G., Numerical Simulation of Growth of a Vapor Bubble During Flow Boiling in a Microchannel, Microfluidics and Nanofluidics, vol.1, vol.2, pp. 137-145, 2005.
28. Myers, J. G., Yerramilli, V. K., Hussey, S. W., Yee, G. F., and Kim, J., Time and Space Resolved Wall Temperature and Heat Flux Measurements during Nucleate Boiling With Constant Heat Flux Boundary Conditions, International Journal of Heat and Mass Transfer, vol.48, pp. 2429-2442, 2005.
29. Son, G., Dhir, V. K., and Ramanujapu, N., Dynamics and Heat Transfer Associated With a Single Bubble During Nucleate Boiling on a Horizontal Surface, Journal of Heat Transfer, vol.121, pp. 623-629, 1999.
30. Moghaddam, S., and Kiger, K., Physical Mechanisms of Heat Transfer during Single Bubble Nucleate Boiling of FC-72 Under Saturation Conditions-I. Experimental Investigation, International Journal of Heat Mass Transfer, vol.52, pp. 1284-1294, 2009.
31. Thome, J.R., Boiling in Microchannels, International Journal of Heat and Fluid Flow, vol.255, pp. 128-139, 2004.
32. Utaka, Y., Tasaki, Y., and Okuda, S., Measurement of Microlayer Thickness in Microchannel Vapor Generator (in Japanese), in Proceedings of the 40th National Heat Transfer Symposium of Japan, Hiroshima, Japan, May 2003, vol.I, G152, 2003.
33. Moriyama, K., and Inoue, A., Thickness of the Liquid Film Formed by a Growing Bubble in a Narrow Gap Between Two Horizontal Plates, Journal of Heat Transfer, vol.118, pp. 132-139, 1996.
34. Koffman, L. D., and Plesset, M. S., Experimental Observations of the Microlayer in Vapor Bubble Growth on a Heated Solid, Journal of Heat Transfer, vol.105, pp. 625-632, 1983.
35. Dupont, V., Thome, J. R., and Jacobi, A. M., Heat Transfer Model for Evaporation in Microchannels. Part II: Comparison With the Database, International Journal of Heat and Mass Transfer,vol. 47, pp. 3387-3401, 2004. (Pubitemid 38616312)
36. Steinke, M. E., and Kandlikar, S. G., Control and Effect of Dissolved Air in Water During Flow Boiling in Microchannels, International Journal ofHeat and Mass Transfer, vol.47, pp. 1925-1935, 2004.