A scale analysis based theoretical force balance model for critical heat flux (CHF) during saturated flow boiling in microchannels and minichannels

Proceedings of the ASME Micro/Nanoscale Heat and Mass Transfer International Conference 2009, MNHMT2009

Volumn 3, Issue , 2010, Pages 569-583

  Kandlikar, Satish G ^a  

^a ROCHESTER INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COOLING SYSTEMS; ERRORS; EVAPORATION; MICROCHANNELS; STATISTICS; SURFACE TENSION;

ACCURATE PREDICTION; DATA SET; FLOW BOILING; FLUX CONDITIONS; FORCE BALANCE MODELS; MINI-CHANNELS; SATURATED FLOW BOILING; SCALE ANALYSIS; SMALL DIAMETER TUBE; SURFACE TENSION FORCE;

HEAT FLUX;

EID: 77954346503     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/1.4001124     Document Type: Conference Paper

References (63)

1. Katto, Y., Critical Heat Flux. In "Advances in Heat Transfer," Coordinators, Hartnett, J.P., and Irvine, T.F., Vol.17, Academic Press, 1985.
2. Hewitt, G.F., Burnout. In Handbook of Multiphase Systems, Ed. Hetsroni, G., Hemisphere Publishing Corp. New York, 1982.
3. Bergles, A.E., Burnout in Boiling Heat Transfer, Part II: Subcooled and Low Quality Forced-Convection Systems. In "Two-Phase Flows and Heat Transfer," Eds. Kakac, S., and Verizoglu, T.N., Vol.II, Hemisphere, Washington, DC, 1976.
4. Tong, L.S., and Tang, Y.S., Chapter 5: Flow Boiling Crisis. In Boiling Heat Transfer and Two-Phase Flow, Taylor and Francis, Washington, DC, 1997.
5. Celata, G.P., and Mariani, A., Chapter 17: CHF and Post- CHF Heat Transfer, In "Handbook of Phase Change: Boiling and Condensation," Eds. Kandlikar, S.G., Shoji, M., and Dhir, V.K., Taylor and Francis, Philadelphia, PA, 1999.
6. Bergles, A.E., and Kandlikar, S.G., "On the Nature of Critical Heat Flux in Microchannels," Journal of Heat Transfer, Vol. 127, No. 1,pp. 101-107, 2005.
7. Wang, G.D., Cheng, P., and Wu, H.Y., "Unstable and Stable Flow Boiling in Parallel Microchannels and in a Single MicroChannel," International Journal of Heat and Mass Transfer, Vol.50, pp. 4297-4310, 2007. (Pubitemid 47125896)
8. Kandlikar, S. G., Kuan, W.K., Willistein, D.A., and Borrelli, J., "Stabilization of Flow Boiling in Microchannels using Pressure Drop Elements and Fabricated Nucleation Sites", Journal of Heat Transfer, Vol.128, No.4, pp. 389-396, 2006.
9. Kuo, C.J., and Peles, Y., "Flow boiling Instabilities in Microchannels and Means for Mitigation by Reentrant Cavities," Journal of Heat Transfer, Vol.130, Article No. 072402, 2008.
10. Kandlikar, S.G., "Methods for Stabilizing Flow in Channels and Systems Thereof," U.S. Patent No.7,575,046, issued August 2009.
11. Rohsenow, W.M., "A Method of Correlating Heat Transfer Data for Surface Boiling of Liquids," Trans. ASME, Vol.74, pp. 969-976, 1952.
12. 12.Stephan, K., and Abdelsalam, M., "A New Correlation for for Natural Convection Boiling," International Journal of Heat and Mass Transfer, Vol.23, pp. 73-87, 1980.
13. Cooper, M.G., "Saturation Nucleate Pool Boiling - A Simple Correlation," IChemE Symposium Series, Vol.86, pp. 786-793, 1984.
14. Bonilla, C. F., and Perry, C. W., "Heat Transmission to Boiling Binary Liquid Mixtures," Transactions of American Society of Chemical Engineers, Vol.37, pp. 685-705, 1941.
15. Kutateladze, S. S., "On the Transition to Film Boiling under Natural Convection," Kotloturbostroenie, No.3, pp. 10-12, 1948.
16. Kutateladze, S. S., 1951, "A Hydrodynamic Theory of Changes in a Boiling Process Under Free Convection," Izvestia Akademia Nauk, S.S.S.R., Otdelenie Tekhnicheski Nauk,No. 4, pp. 529, 1951.
17. Borishanskii, V. M., "On the Problem of Generalizing Experimental Data on the Cessation of Bubble Boiling in Large Volume of Liquids," Ts. K.I.T., 28, Moscow, 1955.
18. Rohsenow, W. M., and Griffith, P., "Correlation of Maximum Heat Transfer Data for Boiling of Saturated Liquids," Chem. Eng. Prog., 52, p. 47, 1956.
19. Zuber, N., "Hydrodynamic Aspects of Boiling Heat Transfer," Ph.D. thesis, Research Laboratory, Los Angeles and Ramo-Wooldridge Corporation, University of California, Los Angeles, CA, 1959.
20. Chang, Y. P., "An Analysis of the Critical Conditions and Burnout in Boiling Heat Transfer," USAEC Rep. TID- 14004, Washington, DC, 1961.
21. Katto, Y, and Yokoya, S., "Principal Mechanism of Boiling Crisis in Pool Boiling," International Journal of Heat and Mass Transfer, Vol.11, pp. 993-1002, 1968.
22. Haramura, Y, and Katto, Y, "New Hydrodynamic Model of Critical Heat Flux Applicable Widely to both Pool and Forced Convection Boiling on Submerged Bodies in Saturated Liquids," International Journal Heat Mass Transfer, Vol.26, pp. 379-399, 1983.
23. Lienhard, J. H., and Dhir, V. K., "Extended Hydrodynamic Theory of the Peak and Minimum Pool Boiling Heat Fluxes," NASA CR-2270, Contract No. NGL 18-001-035, 1973.
24. Kirishenko, Yu. A., and Cherniakov, P. S., "Determination of the First Critical Thermal Heat Flux on Flat Heaters," Journal of Engineering Physics, 20, pp. 699-702, 1973.
25. Unal, C, Daw, V, and Nelson, R. A., "Unifying the Controlling Mechanisms for the Critical Heat Flux and Quenching: The Ability of Liquid to Contact the Hot Surface," ASME J. Heat Transfer, 114, pp. 972-982, 1992.
26. Kandlikar, S.G., "A Theoretical Model to Predict Pool Boiling CHF Incorporating Effects of Contact Angle and Orientation," Journal of Heat Transfer, 123, pp. 1071-1079, 2001.
27. Whalley, P.B., Hutchinson, P., and Hewitt, G.F., "The Calculation of Critical Heat Flux in Forced Convectiva Boiling," Heat Transfer 1974, Vol.IV, pp. 290-294, International Heat Transfer Conference, Tokyo, 1974.
28. Revellin, R., and Thome, J.R., "A Theoretical Model for tha Prediction of the Critical heat Flux in Heated Microchannels," International Journal of Heat and Mass Transfer, Vol.51, pp. 1216-1225, 2008.
29. Wojtan, L., Revellin, R., and Thome, J.R., "Investigation of Saturated Heat Flux in a Single, Uniformly Heated MicroChannel," Experimental Thermal and Fluid Science; Vol.30, pp. 765-774, 2006.
30. Kosar, A., "A Model to Predict Saturated Critical Heat Flux in Minichannels and Microchannels," International Journal of Heat and Mass Transfer, Vol.48, pp. 261-270, 2009.
31. Katto, Y, and Ohno, H., "An Improved Version of tha Generalized Correlation of Critical Heat Flux for the Forced Convective Boiling in Uniformly Heated Vertical Tubes," International Journal of Heat and Mass Transfer, Vol.27, No.9, 1641-1648, 1984.
32. Qu, W., and Mudawar, I., "Measurement and Correlation of Critical Heat Flux in Two-Phase Micro-channel Heat Sinks," International Journal of Heat and Mass Transfer, Vol.47, pp. 2045-2059, 2004.
33. M.B. Bowers, I. Mudawar, High flux boiling in low flow rate, low pressure drop mini-channel and micro-channel heat sinks, Int. J. Heat Mass Transfer 37 (1994) 321-332.
34. 34.Sarma, P.K., Srinivas, V, Sharma, K.V, Dharma Rao, and Celata, G.P., "A Correlation to Evaluate Critical heat Flux in Small Diameter Tubes Under Subcooled Conditions of tha Coolant," International Journal of Heat and Mass Transfer, Vol.49, pp. 42-51,2006.
35. Roday, A.P., and Jensen, M.K., "Study of the Critical Heat Flux Condition with Water and R-123 during Flow Boiling in Microtubes. Part II - Comparison of Data with Correlations and Establishment of a New Subcooled CHP Correlation," International Journal of Heat and Mass Transfer, Vol.. 52, 3250-3256, 2009.
36. Kosar, A., Peles, Y, Bergles, A.E., and Cole, G.S., "Experimental Investigation of Critical Heat Flux in Microchannels for Flow-Field Probes," Paper No. ICNMM2009-82214, ASME Seventh International Conference on Nanochannels, Microchannels, and Minichannels, Pohang, Korea, 2009.
37. Bergles, A.E., "Subcooled Burnout in Tubes of Small Diameter," ASME Paper, 63-WA-182, 1963.
38. Vandervort, C.L., Bergles, A.E., and Jensen, M.K., "An Experimental-study of Critical Heat-flux in very High Heat Flux Subcooling Boiling," International Journal of Heat and Mass Transfer Vol. 37, 161-173, 1994.
39. Zhang, W., Hibiki, T, Mishima, K., and Mi, Y., "Correlation of Critical heat Flux for Flow Boiling of Water in Mini-channels," International Journal of Heat and Mass Transfer, Vol.49, pp. 1058-1072, 2006.
40. 2 (100-2500 psia), AEEW-R 789, United Kingdom Atomic Energy Authority, 1972.
41. Katto,Y, "A Generalized Correlation of Critical Heat Flux for the Forced Convection Boiling in Vertical Uniformly Heated Round Tubes, International Journal of Heat Mass Transfer, Vol. 21,1527-1542, 1978.
42. Shah, M.M., "Improved General Correlation for Critical Heat Flux during Upflow in Uniformly Heated Vertical Tubes," International Journal of Heat and Fluid Flow, Vol.8, pp. 326-335, 1987.
43. Tong, L.S., "Boundary-layer Analysis of the Flow Boiling Crisis," International Journal of Heat Mass Transfer, Vol.11, pp. 1208-1211, 1968.
44. Inasaka, F., and Nariai, H., "Critical Heat Flux and Flow Characteristics of Subcooled Flow Boiling in Narrow Tubes, JSME International Journal Vol. 30, pp. 1595-1600, 1987.
45. Celata, G.P., Cumo, M., and Mariani, A., "Assessment of Correlations and Models for the Prediction of CHF in Water Subcooled Flow Boiling," International Journal of Heat and Mass Transfer, Vol.37, pp. 237-255, 1994.
46. Hall, D.D., and Mudawar, I., "Critical Heat Flux (CHF) for Water Flow in Tubes-II. Subcooled CHF Correlations," International Journal of Heat and Mass Transfer, Vol.43, pp. 2605-2640, 2000. (Pubitemid 30255106)
47. Kandlikar, S.G., and Steinke, M.E., "Contact Angles and Interface Behavior During Rapid Evaporation of Liquid on a Heated Surface," International Journal of Heat and Mass Transfer, Vol.45, pp. 3771-3780,2002.
48. 48.Sefiane, K., Benielli, D., and Steinchen, A., "A New Mechanism for Pool Boiling Crisis, Recoil Instability and Contact Angle Influence," Colloids and Surfaces A: Physiochemical and Engineering Aspects, Vol.142, pp. 361-373, 1998.
49. Kandlikar, S.G., "Scale Effects on Flow Boiling in Microchannels: A Fundamental Perspective," Keynote Paper presented at the Seventh ECI International Conference on Boiling Heat Transfer, Florianopolis-SC-Brazil, 3-7 May 2009.
50. th International Conference on Nanochannels, Microchannels and Minichannels, June 22-24, Pohang, Korea, 2009.
51. Kandlikar, S.G. "Heat Transfer Mechanisms During Flow Boiling in Microchannels." Journal of Heat Transfer, Vol.126, pp. 8-16, 2004.
52. Kandlikar, S.G., and Grande, W.J, "Evolution of MicroChannel Flow Passages - Thermohydraulic Performance and Fabrication Technology," Source Heat Transfer Engineering , Vol.24 1, pp. 3-17, 2003.
53. Kandlikar, S.G, Heat Transfer and Fluid Flow in Minichannels and Microchannels, Elsevier Publishing Corp, Kidlington, Oxford, UK, 2006.
54. Kosar, A, Kuo, C.-J, and Peles, Y, "Boiling Heat Transfer in Rectangular Microchannels with Reentrant Cavities," International Journal of Heat and Mass Transfer, Vol.48, pp. 4867-4886, 2005.
55. Kosar, A, and Peles, Y, "Critical heat flux of R-123 in silicon-based microchannels," Journal of Heat Transfer, Vol.129, pp. 844-851,2007.
56. Kuan, W.K, and Kandlikar, S.G, "Critical Heat Flux Measurement and Model for Refrigerant-123 under Stabilized Flow Conditions in Microchannels," Journal of Heat Transfer, Vol.130, No.3, Article Number 034503, 5 pages, 2008.
57. Roday, A.P, and Jensen, M.K, "Study of the critical heat flux condition with water and R-123 during flow boiling in microtubes. Part I - Experimental Results and Discussion of Parametric Trends," International Journal of Heat and Mass Transfer, Vol.52, 3235-3249, 2009.
58. Martin-Callizo, C, AH, R, and Palm, B, "Dryout Incipience and Critical Heat Flux in Saturated Flow Boiling of Refrigerants in a Vertical Uniformly Heated MicroChannel," Proceedings of the ASME 6th International Conference on Nanochannels, Microchannels and Minichannels, pp. 708-712, 2008.
59. Inasaka, F, and Nariai, H, "Critical Heat Flux of Subcooled Flow Boiling in Uniformly Heated Straight Tubes," Fusion Engineering and Design, Vol.19, pp. 329-337, 1992.
60. Roach, G.M., Abdel-Khalik, S.I. , Ghiaasiaan, S.M., Dowling, M.F, and Jeter,S.M, " Low-flow critical heat flux in heated microchannels," Nuclear Science and Engineering, Vol.131,411-425, 1999.
61. 61.Sumith, B, Kaminaga, F, and Matsumura, K, "Saturated Boiling of Water in a Vertical Small Diameter Tube," Experimental Thermal and Fluid Science, Vol.27, pp. 787- 801,2003.
62. Cheng, X, Erbacher, F.J, Muller, U, and Pang, F.G., "Critical heat flux in uniformly heated vertical tubes," International Journal of Heat and Mass Transfer, Vol.40, pp. 2929-2939, 1997.
63. Agostini, B, Revellin, R, Thome, J.R., Fabbri, M, Michel, B, Calmi, D, and Kloter, U, "High Heat Flux Flow Boiling in Silicon Multi-microchannels - Part III: Saturated critical Heat Flux of R236fa and Two-Phase Pressure Drops," International Journal of Heat and Mass Transfer, Vol.51, pp. 5426-5442, 2008.