A review of engineering research in sustainable manufacturing

ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011

Volumn 2, Issue , 2011, Pages 599-619

  Haapala, Karl R ^a   Zhao, Fu ^b   Camelio, Jaime ^c   Sutherland, John W ^b   Skerlos, Steven J ^d   Dornfeld, David A ^e   Jawahir, I S ^f   Zhang, Hong Chao ^g   Clarens, Andres F ^h  

^a Oregon State University   (United States)

^b Purdue University   (United States)

^c State University   (United States)

^d UNIVERSITY OF MICHIGAN   (United States)

^e UNIVERSITY OF CALIFORNIA   (United States)

^f UNIVERSITY OF KENTUCKY   (United States)

^g Department of Electrical and Computer Engineering   (United States)

^h University of Virginia   (United States)

Author keywords

Environment; Life cycle engineering; Manufacturing processes; Manufacturing systems; Sustainability

Indexed keywords

CONSERVE ENERGY; DELIVERY OF GOODS; DEPARTMENT OF COMMERCE; DISCRETE MANUFACTURING; ENVIRONMENT; FACILITY DESIGNS; LIFE CYCLE ENGINEERING; MANUFACTURED PRODUCTS; MANUFACTURING PROCESS; MANUFACTURING PROCESSES; MANUFACTURING RESEARCH; MANUFACTURING SYSTEM; NEGATIVE IMAGE; PROCESS LEVELS; PRODUCTION PLANNING; SOCIAL IMPLICATION; STRATEGIC ACTIVITIES; SUPPLY CHAIN DESIGN; SUSTAINABLE MANUFACTURING; SUSTAINABLE PROCESS; SYSTEMS LEVELS;

CONSERVATION; CONTRACTS; ENGINEERING RESEARCH; ENVIRONMENTAL IMPACT; INDUSTRIAL ENGINEERING; INDUSTRIAL RESEARCH; INNOVATION; LIFE CYCLE; PRODUCT DEVELOPMENT; PRODUCTION CONTROL; SUPPLY CHAINS; SUSTAINABLE DEVELOPMENT;

MANUFACTURE;

EID: 82455192661     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/MSEC2011-50300     Document Type: Conference Paper

References (159)

1. WCED (1987). Our Common Future, World Commission on Environment and Development, Oxford University Press, Oxford; New York.
2. UNEP (2005). World Summit Outcome Document, United Nations General Assembly, Document A/60/L.1, September 15, http://www.unep.org/greenroom/ documents/outcome.pdf, Accessed February27, 2011.
3. USBEA (2008). Annual Industry Accounts, http://www.bea.gov/about/pdf/IED- Annual.pdf, U.S. Bureau of Economic Analysis, Accessed February 27, 2011.
4. Schipper, M. (2006). Energy-Related Carbon Dioxide Emissions in U.S. Manufacturing, U.S. Energy Information Administration. DOE/EIA-0573(2005), Released November. http://www.eia.doe.gov/oiaf/1605/ggrpt/pdf/industry-mecs.pdf, Accessed February 27, 2011.
5. Curran, M.A. (2006). Life Cycle Assessment: Principles and Practice, EPA/600/R-06/060, U.S. Environmental Protection Agency, Cincinnati, OH.
6. ISO (2006). ISO 14040, Environmental Management-Life Cycle Assessment-Principles and Framework.
7. Jorgensen A, Le Bocq A., Nazarkina L., Hauschild M. (2008). "Methodologies for Social Life Cycle Assessment," Int J LCA, 13(2), pp. 96-103.
8. Ullman, D. G. (1997). The Mechanical Design Process, 2nd ed., McGraw-Hill, New York.
9. Ramani, K., D. Ramanujan, W.Z. Berstein, F. Zhao, J. Sutherland, C. Handwerker, J.-K. Choi, H. Kim, and D. Thurston (2010). "Integrated Sustainable Life Cycle Design: A Review," J. Mech. Des., 132, 091004, 15 pages.
10. Mihelcic J. R., J. C. Crittenden, M. J. Small, D. R. Shonnard, D. R. Hokanson, Q. Zhang, H. Chen, S. A. Sorby, V U. James, J. W. Sutherland, and J. L. Schnoor (2003). "Sustainability Science and Engineering: The Emergence of a New Metadiscipline," Environmental Science and Technology, 37 (23), pp. 5314-5324.
11. USDOC (2007). How Does Commerce Define Sustainable Manufacturing?, International Trade Administration, U.S. Department of Commerce, http://www.trade.gov/competitiveness/sustainablemanufacturing/ how-doc-defines-SM.asp, accessed February 27, 2011.
12. NACFAM (2009). Sustainable Manufacturing, National Council for Advanced Manufacturing, http://nacfam02.dev.web.sba.com/PolicyInitiatives/ SustainableManufacturing/tabid/64/Default.aspx, accessed Feb. 27, 2011.
13. Jawahir, I.S., Dillon, O.W., Rouch, K.E., Joshi, K.J., Venkatachalam, A., Jaafar, I.H. (2006). "Total Life-cycle Considerations in Product Design for Sustainability: A Framework for Comprehensive Evaluation," (Keynote Paper), Proceedings of the 10th Int. Research/Expert Conf., TMT 2006, Barcelona, Spain, 1-10.
14. Wanigarathne, P.C., J. Liew, X. Wang, O.W. Dillon, Jr., I.S. Jawahir (2004). "Assessment of Process Sustainability for Product Manufacture in Machining Operations," Proc. Global Conf. on Sust. Prod. Dev. & Life Cycle Eng., Berlin, Germany, 305-312.
15. Jawahir, I.S. and O.W. Dillon (2007). "Sustainable Manufacturing Processes: New Challenges for Developing Predictive Models and Optimization Techniques," (Keynote Paper), Proceedings of First International Conference on Sustainable Manufacturing, Montreal, Canada, 1-19.
16. Fiksel, J., J. McDaniel, and C. Mendenhall (1999). "Measuring Progress towards Sustainability Principles, Process, and Best Practices," Greening of Industry Network Conference Best Practice Proceedings, http://www.economics.com/images/Sustainability%20Measurement%20GIN.pdf.
17. Feng, S.C., C. Joung, and G. Li (2010). "Development Overview of Sustainable Manufacturing Metrics," Proceedings of the 17th CIRP International Conference on Life Cycle Engineering, Hefei, China.
18. Dreher, J., M. Lawler, J. Stewart, G. Strasorier, M. Thorne (2009). General Motors: Metrics for Sustainable Manufacturing, Laboratory for Sustainable Business, Massachusetts Institute of Technology, http://actionlearning.mit.edu/files/slab-files/Projects/2009/GM, %20report.pdf, Accessed March 2, 2011.
19. Lu, T., A. Gupta, A. D. Jayal, F. Badurdeen, S.C. Feng, O. W. Dillon, Jr., and I. S. Jawahir (2010). "A Framework of Product and Process Metrics for Sustainable Manufacturing", Proc. 8th Global Conf. on Sustainable Manufacturing, Abu Dhabi, UAE, November 22-24.
20. Choi, A.C.K., H. Kaebernick, and W.H. Lai (1997). "Manufacturing Processes Modeling for Environmental Impact Assessment." Journal of Materials Processing Technology. 70, pp. 231-238.
21. UNDSD (2001). Indicators of Sustainable Development: Guidelines and Methodologies, Accessed October 15, 2005 from http://www.un.org/esa/sustdev.
22. UNDP (2011). Human Development Report 2010: The Real Wealth of Nations: Pathways to Human Development, http://hdr.undp.org/en/, Accessed February 27.
23. Parris T. M. and R. W. Kates (2005). "Characterizing and Measuring Sustainable Development," Annual Reviews of Environment and Resources, 28, pp. 559-586.
24. Labuschagne C. and A.C. Brent (2006). "Social Indicators for Sustainable Project and Technology Life Cycle Management in the Process Industry," International Journal of Life Cycle Assessment, 11(1), pp. 3-15.
25. Hutchins, M.J., J.S. Gierke, and J.W. Sutherland (ND). "Development of Social Sustainability Indicators for U.S. Businesses," forthcoming in Social Indicators Research.
26. ISO (2004). ISO 14001, Environmental management systems - Requirements with guidance for use.
27. ISO (2004). ISO 14004, Environmental management systems - General guidelines on principles, systems and support techniques.
28. USEPA (2003). Lean Manufacturing and the Environment: Research on Advanced Manufacturing Systems and the Environment and Recommendations for Leveraging Better Environmental Performance, EPA100-R-03-005, Oct., U.S. Environmental Protection Agency, Washington, D.C.
29. Hischier R., Weidema B., Althaus H.-J., Bauer C., Doka G., Dones R., Frischknecht R., Hellweg S., Humbert S., Jungbluth N., Kollner T., Loerincik Y., Margni M., and Nemecek T. (2010). Implementation of Life Cycle Impact Assessment Methods. Final report ecoinvent v2.2 No. 3. Swiss Centre for Life Cycle Inventories, Dubendorf, CH.
30. NREL (2011). U.S. Life Cycle Inventory Database, http://www.nrel.gov/lci/ , National Renewable Energy Laboratory, U.S. Department of Energy, accessed February 22.
31. Hendrickson, C.T., Lave, L.B., Mattews, H.S. (2006). Environmental Life cycle Assessment of Goods and Services: An Input-Output Approach, Resources for the Future, Washington D.C.
32. EIO-LCA (2011). http://www.eiolca.net/, Green Design Institute, Carnegie Mellon University, Accessed February 22.
33. Overcash, M., Twomey, J., Kalla, D. (2009). "Unit process life cycle inventory for product manufacturing operations," Proceedings of the 2009 International Manufacturing Science and Engineering Conference MSEC2009, October 4-7, West Lafayette, Indiana.
34. CO2PE! (2011). Cooperative Effort on Process Emissions in Manufacturing, http://www.mech.kuleuven.be/ co2pe!/index.php, Accessed February 27.
35. Choi, J.K., and Ramani, K. (2009). "A Quest for Sustainable Product Design: A Systematic Methodology for Integrated Assessment of Environmentally Benign and Economically Feasible Product Design," VMD, Saarbrucken, Germany.
36. Li, C.B., Liu, F., Wang, Q.F., Li, C.Z. (2010). "AHP Based SWOT Analysis for Green Manufacturing Strategy Selection," Key Engineering Materials, 431-432, pp. 249-252.
37. Chan, C.C.S., Yu, K.M., Yung, K.L. (2010). "Green Manufacturing Using Integrated Decision Tools," IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2010, Dec. 7-10, Macao, China, pp. 2287 - 2291.
38. USEIA (2006). Energy Use in Manufacturing 1998 to 2002, U.S. Energy Information Administration, http://www.eia.doe.gov/emeu/mecs/special-topics/ energy-use-manufacturing/energyuse98-02/98energyuse02.html, Released: August 2006, Accessed February 10, 2011.
39. USEIA (2010). AEO 2011 Early Release Overview, U.S. Energy Information Administration, http://www.eia.gov/forecasts/aeo/early-consumption.cfm, Released: December 16, 2010. Accessed Feb. 10, 2011.
40. Gopalakrishnan, B., Gupta, D.P., Mardikar, Y., Chaudhari, S. (2007). "Industrial Energy Efficiency", in Environmentally Conscious Manufacturing, Myer Kutz (Ed.), John Wiley & Sons, Inc., Hoboken, NJ, pp.265-294.
41. Sutherland, J.W., Michalek, D.J., and Rivera, J.L. (2007). "Air Quality in Manufacturing", in Environmentally Conscious Manufacturing, Myer Kutz (Ed.), John Wiley & Sons, Inc., Hoboken, NJ, pp.145-178.
42. Masters, G.M. and Ela, W.P. (2007). Introduction to Environmental Engineering and Science, 3rd Edition, Prentice Hall. pp. 221-223 [43] USEPA (2001).
43. Environmental Protection Agency, 40 CFR Parts 413, 433, 438, 463, and 444, Federal Register, Vol. 66, No. 2, Jan 3, 2001, proposed rules.
44. Canter, N. (2009). "The Possibilities and Limitations of Dry Machining," Tribology & Lubrication Technology, http://www.stle.org/ assets/document/40-DryMachining.pdf accessed Feb 10, 2011.
45. Gaitonde, V.N., Karnik, R.S., and Davim, J.P. (2010). "Minimum Quantity Lubrication in Machining", in Sustainable Manufacturing, J. Paulo Davim (Ed.), John Wiley & Sons, Inc., Hoboken, NJ, pp.79-105.
46. Higgins, T.E. (1995). Pollution Prevention Handbook, Lewis, pp. 313-319.
47. Baral, A., and Engelken, R.D. (2002). "Chromium-based regulations and greening in metal finishing industries in the USA", Environmental Science & Policy, 5(2), pp. 121-133.
48. Sutherland, J.W., and K.L. Gunter (2001). "Environmental Attributes of Manufacturing Processes," Ch. 13 in Handbook of Environmentally Conscious Manufacturing, Ed. C. N. Madu, Kluwer Acad. Pub., pp. 293-316.
49. Sutherland, J. W., K. L. Gunter, K. R. Haapala, K. Khadke, S. J. Skerlos, J. B. Zimmerman, W. W. Olson, and R. Sadasivuni (2003). "Environmentally Benign Manufacturing: Status and Vision for the Future," Transactions of North American Manufacturing Research Institute/Society of Manufacturing Engineers (NAMRI/SME), Vol. 31, Hamilton, Canada, May 20-23, pp. 345-352.
50. Morrow, W.M., Qi. H., Kim, I., Mazumder, J., Skerlos, S.J. (2005), "Environmental Aspects of Laser Based Tool and Die Manufacturing," Journal of Cleaner Production, 15(10), pp. 932-943.
51. Weinert, K., Inasakii, I., Sutherland, J.W., and Wakabayashi, T. (2004). "Dry Machining and Minimum Quantity Lubrication," Annals of the CIRP, 53(2), pp. 511-537.
52. Sreejith P.S. and Ngoi B.K.A. (2000). "Dry Machining: Machining of the Future," Journal of Material Processing Technology, 101(1), pp. 287-291.
53. Klocke, F. and Eisenblaetter, G. (1997). "Dry Cutting," Annals of the CIRP, 46(2), pp. 519-526
54. Kustas, F.M. Fehrenbacher, L.I. Komanduri, R. (1997). "Nanocoatings on Cutting Tools for Dry Machining," Annals of the CIRP, 46(1), pp. 39-42.
55. Dhar, N.R., Islam, M.W., Islam, S., Mithu, M.A.H. (2006). "The influence of minimum quantity of lubrication (MQL) on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel," Journal of Materials Processing Technology, 171(1), pp. 93-99.
56. Liao, Y.S., Lin, H.M. (2007). "Mechanism of minimum quantity lubrication in high-speed milling of hardened steel," International Journal of Machine Tools & Manufacture, 47(11), pp. 1660-1666.
57. Attanasio, A., Gelfi, M., Giardini, C., Remino, C. (2004). "Minimal quantity lubrication in turning: Effect on tool wear," 2nd International Conference on Tribology in Manufacturing Processes, 260(3), pp. 333-338.
58. Filipovic, A. and Stephenson, D. (2006). "Minimum Quantity Lubrication (MQL) Applications in Automotive Powertrain Machining," Machining Science & Technology, 10(1), pp. 3-22.
59. Wang, Z.Y. and Rajurkar, K.P. (2000). "Cryogenic Machining of Hard-to-cut Materials," Wear, 239(2), pp. 168-175.
60. Hong, S. (2005). "Investigation of Liquid Nitrogen Lubrication Effect in Cryogenic Machining," World Tribology Congress III, 1, September 12-16, 2005, Washington D.C.
61. Skerlos, S.J., Hayes, K.F., Clarens, A.F., and Zhao, F. (2008). "Current Advances in Sustainable Metalworking Fluids Research," International Journal of Sustainable Manufacturing, 1(1-2), pp. 180-202.
62. Clarens, A.F., Hayes, K.F., and Skerlos, S.J. (2006). "Feasibility of Supercritical Carbon Dioxide Metalworking Fluids," Journal of Manufacturing Processes, 1(8), pp. 47-53.
63. Clarens, A. F., K. F. Hayes, and S. J. Skerlos (2006). "Feasibility of Metalworking Fluids Delivered in Supercritical Carbon Dioxide," Journal of Manufacturing Processes, 8(1), pp. 46-53.
64. Milewski, J.O. (1998). "Directed Light Fabrication of a Solid Metal Hemisphere using 5-axis Powder Deposition," Journal of Materials Processing Technology, 75, pp. 165-172.
65. Das, S., Wohlert, M., Beaman J.J., and Bourell, D.L. (1999). "Processing of Titanium Net Shapes by SLS/HIP," Materials and Design, 20, pp. 115-121.
66. Sachs, E., Cima, M., Williams, P., Brancazio, D., and Cornie, J. (1992). "Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model," Journal of Engineering for Industry, 114, pp. 481-488.
67. Mazumder, J., Dutta, D., Kikuchi, N., and Ghosh, A. (2000). "Closed Loop Direct Metal Deposition: Art to Part," Optics and Lasers in Engineering, 34, pp. 397-414.
68. Mazumder, J., Schifferer, A., and Choi, J. (1999). "Direct Materials Deposition: Designed Macro and Microstructure." In Materials Research Society Symposia Proceedings. New York, NY: Elsevier North Holland.
69. Li, Y., Saitou, K., Kikuchi, N., Skerlos, S.J., and Papalambros, P. (2001). "Design of Heat-Activated Reversible Integral Attachments for Product-Embedded Disassembly," Proceedings of EcoDesign 2001: 2nd International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan, December 12-16, pp. 360-365.
70. Shalaby, M., and Saitou, K. (2008). "High-Stiffness Heat-Reversible 'Lock and Key' Locator-Snap Systems for Design for Authorized Disassembly," Proceedings of the ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 3-6, New York City, NY, DETC2008-49664.
71. Regenstein, L., Goldberg, T., Shearman, J., Anderson, B., and Case L. (2011). Metal Finishing Industry, Illinois Sustainable Technology Center, http:http: //www.istc.illinois.edu/info/library-docs/manuals/finishing /toc1.htm, accessed February 10, 2011.
72. Rajagopalan, N., Lindsey, T., and Skerlos, S.J. (2001). "Engineering of Ultrafiltration Equipment in Alkaline Cleaner Applications," Plating & Surface Finishing, 88(12), pp. 56-60.
73. Dornfeld, D., and Lee, D. E. (2008). Precision Manufacturing, Springer, pp. 555-569.
74. Dornfeld, D., ed. (2011). Green Manufacturing: Fundamentals and Applications, Springer, to appear.
75. Boyd, S. (2009). Life-cycle Assessment of Semiconductors, Ph.D. Thesis, Mechanical Engineering, University of California, Berkeley.
76. Sherer, J. M. (2005). Semiconductor Industry: Wafer Fab Exhaust Management, CRC Press.
77. IPCC (2001). Good Practice Guidance and Uncertainty Management in National Greenhouse Gas Inventories, IPCC-TSU NGGIP, Japan.
78. WSC (2010). Joint Statement of the 14th Meeting of the World Semiconductor Council (WSC), May 27, Seoul, South Korea.
79. Sematech (1999). The International Technology Roadmap for Semiconductors, 2003 edition. Technical report.
80. Sematech (2001). The International Technology Roadmap for Semiconductors, 2003 edition. Technical report.
81. Sematech (2003). The International Technology Roadmap for Semiconductors, 2003 edition. Technical report.
82. Sematech (2005). The International Technology Roadmap for Semiconductors, 2005 edition. Technical report.
83. Anastas, P. T. and Kirchhoff, M. M. (2002). "Origins, Current Status, and Future Challenges of Green Chemistry," Accounts of Chemical Research, 35(9), pp. 686-694.
84. DeSimone, J. M. (2002). "Practical Approaches to Green Solvents," Science, 297(5582), pp. 799-803.
85. Clifford, T. (1999). Fundamentals of Supercritical Fluids, Oxford University Press, New York, NY.
86. Jessop, P. G. and Subramaniam, B. (2007). "Gas-Expanded Liquids," Chemical Reviews, 107(6), pp. 2666-2694.
87. Akien, G. R. and Poliakoff, M. (2009). "A Critical Look at Reactions in Class I and II Gas-Expanded Liquids using CO2 and Other Gases," Green Chemistry, 11(8), pp. 1083-1100.
88. Rogers, R. D. and Seddon, K. R. (2003). "Ionic Liquids-Solvents of the Future?," Science, 302(5646), pp. 792-793.
89. Swatloski, R. P., Holbrey, J. D., and Rogers, R. D. (2003). "Ionic Liquids are not Always Green: Hydrolysis of 1-butyl-3-methylimidazolium hexafluorophosphate," Green Chemistry, 5(4), pp. 361-363.
90. Zhang, Y., Bakshi, B. R., and Demessie, E. S. (2008). "Life Cycle Assessment of an Ionic Liquid versus Molecular Solvents and Their Applications," Environmental Science & Technology, 42(5), pp. 1724-1730.
91. Sheehan, J., Camobreco, V., Duffield, J., Graboski, M., and Shapouri, H. (1998). Overview of Biodiesel and Petroleum Diesel Life Cycles, National Renewable Energy Laboratory: Golden, Colorado.
92. DeMarco, N. (2008). High-end Base Oils Keep Coming Lube Report 2008.
93. Binder, T., Canavera, D., Cavalieri, R., Chen, S., Conway, R., Downing, M., Drumm, L., Eidman, V. R., Foster, H., Green, K., Johnson, T., Kaempf, D., Klembara, M., Manella, M., Perine, L., Prabhu, E., Riley, C., Rossmeissl, N., Shane, P., Shapouri, H., Stokes, B., and Walker, L. (2006). Vision for BioEnergy and BioBased Products in the United States, Biomass Research and Development Initiative, Washington, DC.
94. Uchitelle, L. (2008). "Oil Prices Raise Cost of Making Range of Goods," New York Times, June 8.
95. Green, C. L. (2008). U.S. Base Oil Price Report Lube Report, Wednesday, June 4.
96. Miller, S. A., Landis, A. E., Theis, T. L., and Reich, R. A. (2007). "A Comparative Life Cycle Assessment of Petroleum and Soybean-based Lubricants," Environmental Science and Technology, 41(11), pp. 4143-4149.
97. Martin, A. and Rosenthal, E. (2008), "U.N. Says Food Plan Could Cost $30 Billion a Year," New York Times, June 4.
98. Zimmerman, J. B., Clarens, A. F., Hayes, K. F., and Skerlos, S. J. (2003). "Design of Hard Water Stable Emulsifier Systems for Petroleum- and Bio-based Semi-synthetic Metalworking Fluids," Environmental Science and Technology, 37(23), pp. 5278-5288.
99. Clarens, A. F., Zimmerman, J. B., Keoleian, G. A., Hayes, K. F., and Skerlos, S. J. (2008). "Comparison of Life Cycle Emissions and Energy Consumption for Environmentally Adapted Metalworking Fluid Systems," Environmental Science and Technology, 42(22), pp. 8534-8540
100. Schneider, M. P. (2006). Plant-Oil-Based Lubricants and Hydraulic Fluids," Journal of the Science of Food and Agriculture, 86(12), pp. 1769-1780.
101. Thiriez, A. and Gutowski, T. (2006). "An Environmental Analysis of Injection Molding," Proc. 2006 IEEE International Symposium on Electronics and the Environment, pp. 195-200.
102. Williams, E. D., Ayres, R. U., Heller, M., (2002). "The 1.7 Kilogram Microchip: Energy and Material Use in the Production of Semiconductor Devices," Environmental Science & Technology, 36(24), pp. 5504-5510.
103. Allen, D.M. and Jefferies, P. (2006). "An Economic, Environment-Friendly Oxygen-Hydrochloric Acid Regeneration System for Ferric Chloride Etchants used in Photochemical Machining," CIRP Annals - Manufacturing Technology, 55(1), pp. 205-208.
104. Pearce, A.R., R.A. Gregory, and J.A. Vanegas (2000), "Resource allocation and problem prioritization for sustainable facilities and infrastructure," Proceedings of Construction Congress VI: Building Together for a Better Tomorrow in an Increasingly Complex World, February 20-22, Orlando, FL.
105. Sutherland, J.W., T.L. Jenkins, and K.R. Haapala (2010). "Development of a Cost Model and its Application in Determining Optimal Size of a Diesel Engine Remanufacturing Facility," CIRP Annals-Manufacturing Tech., 59(1), pp. 49-52.
106. Clarke, A., Q. Zhang, J. Gershenson, and J. Sutherland (2008). "Selection of Remanufacturing Facility Locations to Minimize Cost and Environmental Impact," Proceedings of 15th CIRP International Conference on Life Cycle Engineering, Sydney, Australia, March 2008, appeared on CD-ROM.
107. Krarti, M. (2011). Energy Audit of Building Systems: An Engineering Approach, 2nd Ed., CRC Press, Boca Raton, FL.
108. Doty, S., and W.C. Turner (2009). Energy Management Handbook, 7th Ed., The Fairmont Press, Lilburn, GA.
109. Hasanbeigi, A. and L. Price (2010). Industrial Energy Audit Guidebook: Guidelines for Conducting an Energy Audit in Industrial Facilities, Technical Report, Lawrence Berkeley National Laboratory, Berkeley, CA.
110. USEPA (2008). Energy Star Building Upgrade Manual, 2008 Ed., U.S. Environmental Protection Agency, Washington, D. C., www.energystar.gov/ia/ business/EPA-BUM-Full.pdf, Accessed March 17, 2010.
111. Jiang, X., M.V. Ly, J. Taneja, P. Dutta, and D.E. Culler (2009). "Experiences with a High-Fidelity Wireless Building Energy Auditing Network," Proc. 7th ACM Conference on Embedded Networked Sensor Systems (SenSys), November 4-6, Berkeley, CA, pp. 113-126.
112. Zhu, Y. (2006). "Applying Computer-based Simulation to Energy Auditing: A Case Study," Energy and Buildings, 38(5), pp. 421-428.
113. Dahmus, J.B., Gutowski, T.C. (2004). "An Environmental Analysis of Machining," 2004 ASME International Mechanical Engineering Congress and RD&D Expo (IMECE), November 13-19, Anaheim, California.
114. Kordonowy, D.N. (2002). A Power Assessment of Machine Tools, BSc Thesis, Massachusetts Institute of Technology, Cambridge, MA.
115. Drake, R., Yildirim, M.B., Twomey, J., Whitman, L., Ahmad, J., and Lodhia, P. (2006). "Data Collection Framework on Energy Consumption in Manufacturing," IIE Annual Conference and Expo, May 20-24, 2006, Orlando, FL.
116. Gutowski, T., Murphy, C., Allen, D., Bauer, D., Bras, B., Piwonka, T., Sheng, P., Sutherland, J., Thurston, D. and Wolff, E. (2005). "Environmentally Benign Manufacturing: Observations from Japan, Europe and the United States," J. Cleaner Production, 13, pp. 1-17.
117. Haapala, K. R., J. L. Rivera, and J. W. Sutherland (2008). "Application of Life Cycle Assessment Methods to Sustainable Product Design and Manufacturing," International Journal of Innovative Computing, Information and Control, Special Issue on Recent Advances in Flexible Automation, 4 (3), pp. 575-589.
118. Haapala, K.R., J.L. Rivera, and J.W. Sutherland (2009). "Reducing Environmental Impacts of Steel Product Manufacturing," Trans. of NAMRI/SME, 37, pp. 419-426.
119. Srinivasan M. and P. Sheng (1999). "Feature-Based Process Planning for Environmentally Conscious Machining -Part 1: Microplanning," Robotics and Computer-Integrated Manufacturing, 15(3), pp. 257-270.
120. Srinivasan M. and P. Sheng (1999). "Feature-Based Process Planning for Environmentally Conscious Machining -Part 2: Macroplanning," Robotics and Computer-Integrated Manufacturing, 15(3), pp. 271-281.
121. Agnetis, A., Pacifici, A., Ross, F., Lucertini, M., Nicoletti, S., Nicolo, F., Oriolo, G., Pacciarelli, D., Pesaro, E. (1997). "Scheduling of Flexible Flow Lines in an Automobile Assembly Plant," European J. of Operational Research, 97, pp. 348-362.
122. Alvarez, E., Diaz, F. (2007). "Framework for the Dynamic Scheduling of Complex Job Shops," Int. J. of Manufacturing Technology and Management, 11(3/4), pp. 411-425.
123. Kumar, R., M.K. Tiwari, R. Shankar (2003). "Scheduling of Flexible Manufacturing Systems: An Ant Colony Optimization Approach," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 217, pp. 1443-1453.
124. Moreira, M.R.A., Alves, R.A.F.S. (2009). "A Methodology for Planning and Controlling Workload in a Job-Shop: A Four-Way Decision-Making Problem," Int. J. of Production Research, 47(10), pp. 2805-2821.
125. Ouelhadj, D., Petrovic, S. (2009). "A Survey of Dynamic Scheduling in Manufacturing Systems," J. of Scheduling, 12, pp.417-431.
126. Shen, W., Hao, Q., Yoon, H.J., Norrie, D.H. (2006). "Applications of Agent-based Systems in Intelligent Manufacturing: An Updated Review," Advanced Engineering Informatics, 20, pp.415-431
127. Shen, W., Wang, L., Hao, Q. (2006). "Agent-based Distributed Manufacturing Process Planning and Scheduling: A State-of-the-Art Survey," IEEE Transactions on Systems, Man, and Cybernetics, Part C: Applications and Reviews, 36(4), pp. 563-577.
128. Mouzon, G., M. B. Yildirim, J. Twomey (2007). "Operational Methods for Minimization of Energy Consumption of Manufacturing Equipment'" International Journal of Production Research, 45, pp. 4247-4271.
129. Mouzon, G., M. B. Yildirim (2008). "A Framework to Minimise Total Energy Consumption and Total Tardiness on a Single Machine," International Journal of Sustainable Engineering, 1, pp. 105-116.
130. Subai, C., Baptiste, Niel, E. (2006). "Scheduling Issues for Environmentally Responsible Manufacturing: The Case of Hoist Scheduling in an Electroplating Line," Int. J. Production Engineering, 99, pp.74-87.
131. Liu, F., Cao, H., Zhang, H., Yuan, C., (2003). "Noise Reduction Scheduling Method in a Shop Floor and its Case Study," Chinese Journal of Mechanical Engineering, 16(4), pp. 337-341.
132. Irani, S., K.R. Pruhs (2005). "Algorithmic Problems in Power Management," ACM SIGACT News, 36, pp. 63-76.
133. Ashok, S. (2006). "Peak-load Management in Steel Plants," Applied Energy, 83, pp. 413-424.
134. Wang, J., Yu, J., Li, S., Xiao, G., Chang, Q., and Biller, S. (2008). "A Data Enabled Operation-Based Simulation for Automotive Assembly," 2008 Asia Simulation Conference - 7th International Conference on Sys. Simulation and Scientific Computing, pp. 726-731.
135. Wang, J., Li, J., and Huang, N. (2009). "Optimal Scheduling to Achieve Energy Reduction in Automotive Paint Shops," Proceedings of 2009 ASME Manufacturing Science and Engineering Conferences, October 4-7, West Lafayette, IN.
136. Mani, M., Lyons, K. W., Rachuri, S., Subrahmanian, E., and Sriram, R. D. (2008). "Introducing Sustainability Early Into Manufacturing Process Planning," Proceedings of the 14th International Conference on Manufacturing Science and Engineering, Evanston, IL, Oct. 7-10.
137. Herrmann, C., Thiede, S. (2009). "Process Chain Simulation to Foster Energy Efficiency in Manufacturing," CIRP J. of Manufacturing Science and Technology, 1, pp.221-229.
138. Fang, K., N. Uhan, F. Zhao, and J. W. Sutherland (2011) "A New Shop Scheduling Approach in Support of Sustainable Manufacturing," Proc. 18th CIRP International Conference on Life Cycle Engineering, May 2-4, Braunschweig, Germany.
139. Badurdeen, F., T.J. Goldsby, D. Iyengar, H. Metta, S. Gupta, and I.S. Jawahir (2009). "Extending Total Lifecycle Thinking to Sustainable Supply Chains," International Journal of Product Lifecycle Management, 4(1-3), pp. 49-67.
140. Jayal, A. D., F. Badurdeen, O. W. Dillon, and I. S. Jawahir (2010). "Sustainable Manufacturing: Modeling and Optimization Challenges at the Product, Process and Systems Levels," CIRP Journal of Manufacturing Science and Technology, 2 (3), pp.144-152.
141. Metta, H. and Badurdeen, F. (2011). "Sustainable Product and Supply Chain Design: Incorporating Environmental, Societal Assessments," IIE Annual Industrial Engineering Research Conf. (IERC), May 21-25, Reno, NV.
142. Kumar, V and J. W. Sutherland (2008). "Sustainability of the Automotive Recycling Infrastructure: Review of Current Research and Identification of Future Challenges," Intl. Journal of Sustainable Manufacturing, 1 (1/2), pp. 145-167.
143. Kumar, V. and J. W. Sutherland (2009). "Development and Assessment of Strategies to Ensure Economic Sustainability of the U.S. Automotive Recovery Infrastructure," Resources, Conservation & Recycling, 53 (8), pp. 470-477.
144. Chanitrakul, O., A. Coronado, C. Lalwani, and C.Y. Wong, (2009). "Reverse Logistics Network Design: A State of the Art Literature Review," Int. J. Business Performance and Supply Chain Modeling, 1(1), pp. 61-81.
145. EU (2000). "Directive 2000/53/EC of the European Parliament and of the Council of 18 September 2000 on End-of Life Vehicles," Official J. of the European Union, pp. 34-43.
146. EU (2006). "Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on Waste Electrical and Electronic Equipment (WEEE)," Official Journal of the European Union, pp. 24-38.
147. Park, I-H. (2005). "E-Waste Recycling Policy in Korea," Resource Recycling Division: Ministry of Environment, Presentation, June.
148. Rickli, J.L., A.R. Clarke, K.R. Haapala, M. Addo, J.A. Camelio and J.W. Sutherland (2008). "Reducing the Environmental and Social Impacts of E-Waste Recovery in Developing Countries through Technology and Policy," Global Conference on Sustainable Product Development and Life Cycle Engineering, Busan, Korea.
149. Walls, M. (2006). "Extended Producer Responsibility and Product Design: Economic Theory and Selected Case Studies", Paper RFF DP 06-08, March, Resources for the Future - Quality of the Environment Division, Washington, D.C.
150. Wilson, D. C. (1996). "Stick or Carrot?: The Use of Policy Measures to Move Waste Management up the Hierarchy," Waste Management & Research, 14, pp. 385-398.
151. Guide, V. D. R. and Pentico, D. W. (2003). "A Hierarchical Decision Model for Re-manufacturing and Re-use," International Journal of Logistics: Research and Applications, 6 (1-2), pp. 29-35.
152. Rickli, J.L. and J.A. Camelio (2010). "Impacting Consumer End-of-Life Product Return Decisions with Incentives," 17th CIRP International Conference on Life Cycle Engineering, May 19-21, Hefei, China.
153. Hutchins, M.J. and J.W. Sutherland (2008). "An Exploration of Measures of Social Sustainability and Their Application to Supply Chain Decisions," Journal of Cleaner Production, 16 (15), pp.1688-1698.
154. Seuring, S. and M. Muller (2008). "From a Literature Review to a Conceptual Framework for Sustainable Supply Chain Management," J. of Cleaner Production, 16, pp. 1699-1710.
155. Badurdeen, F., K. Wijekoon, M. Shuaib, T. J. Goldsby, D. Iyengar and I.S. Jawahir (2010). "Integrated Modeling to Enhance Resilience in Sustainable Supply Chains," Proc. of the 6th IEEE Conference on Automation Science and Engineering (CASE), Toronto, Canada, August 21-23.
156. Shuaib, M., H. Metta, F. Badurdeen, I.S. Jawahir and T. Goldsby (2010). "Methodologies for Design and Performance Evaluation in Sustainable Supply Chains," Proc. 8th Global Conf. on Sustainable Manufacturing, Abu Dhabi, UAE, November 22-24.
157. UPLCI (2011). Manufacturing Unit Process Life-Cycle Inventory Heuristics, http://cratel.wichita.edu/uplci/, Accessed February 27.
158. Ilgin, M.A. and S.M. Gupta (2010). "Environmentally Conscious Manufacturing and Product Recovery (ECMPRO): A Review of the State of the Art," Journal of Environmental Management, 91(3), pp. 563-591.
159. Kumar, V., K.R. Haapala, J.L. Rivera, M.J. Hutchins, W.J. Endres, J.K. Gershenson, D.J. Michalek, and J.W. Sutherland (2006). "Infusing Sustainability Principles into Manufacturing/ Mechanical Engineering Curricula," SME Journal of Manufacturing Systems, 24(3), p. 215-225.