Minimum Quantity Lubrication in Machining

Sustainable Manufacturing

Volumn , Issue , 2013, Pages 79-110

  Gaitonde, Vinayak N ^a   Karnik, Ramesh S ^a   Davim, J Paulo ^b  

^a KLE TECHNOLOGICAL UNIVERSITY   (India)

^b UNIVERSITY OF AVEIRO   (Portugal)

Author keywords

Brass machinability; MQL in machining; MQL limitations; Optimal MQL; Taguchi approach

Indexed keywords

EID: 82455216393     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781118621653.ch3     Document Type: Chapter

References (54)

1. Ahmad Yasir M.S., Che Hassan C.H., Jaharah A.G., Nagi H.E., Yanuar B., Gusri A.I., "Machinability of Ti-6Al-4V under dry and near dry condition using carbide tools", The Open Industrial and Manufacturing Journal, vol. 2, p. 1-9, 2009.
2. Aoyama T., Kakinuma Y., Yamashita M., Aoki M., "Development of a new lean lubrication system for near dry machining process", CIRP Annals - Manufacturing Technology, vol. 57, p. 125-128, 2008.
3. Attanasio A., Gelfi M., Giardini C., Remino C., "Minimal quantity lubrication in turning: effect on tool wear", Wear, vol. 260, p. 333-338, 2006.
4. Avila R.F., Abrao A.M., "The effect of cutting fluids on the machining of hardened AISI 4340 steel", Journal of Materials Processing Technology, vol. 119, p. 21-26, 2001.
5. Benardos P.G., Vosniakos G.C., "Predicting surface roughness in machining: a review", International Journal of Machine Tools and Manufacture, vol. 43, p. 833-844, 2003.
6. Bhowmick S., Alpas T., "Minimum quantity lubrication drilling of aluminum-silicon alloys in water using diamond-like carbon coated drills", International Journal of Machine Tools and Manufacture, vol. 48, p. 1429-1443, 2008.
7. Braga D.U., Diniz A.E., Miranda G.W.A., Coppini N.L., "Using a minimum quantity of lubricant (MQL) and a diamond coated tool in the drilling of aluminum-silicon alloys", Journal of Materials Processing Technology, vol. 122, p. 127-138, 2002.
8. Brockhoff T., Walter A. "Fluid minimization in cutting and grinding", Abrasives, p. 38-42, October 1998.
9. Bruni C., Forcellese A., Gabrielli F., Simoncini M., "Effect of the lubrication-cooling technique, insert technology and machine bed material on the work part surface finish and tool wear in finish turning of AISI 420B", International Journal of Machine Tools and Manufacture, vol. 46, p. 1547-1554, 2006.
10. Byrne G., Scholta E., "Environmentally clean machining processes - a strategic approach", Annals of CIRP, vol. 42, no. 1, p. 471-474, 1993.
11. Cantero J.L., Tardio M.M., Canteli J.A., Marcos M., Miguelez M.H., "Dry drilling of alloy Ti-6Al-4V", International Journal of Machine Tools and Manufacture, vol. 45, 2005, p. 1246-1255.
12. Davim J.P., Sreejith P.S., Gomes R., Peixoto C., "Experimental studies on drilling of aluminum (AA1050) under dry, minimum quantity of lubricant, and flood-lubricated conditions", Proceedings of ImechE, Part B, Journal of Engineering Manufacture, vol. 220, p. 1605-1611, 2006.
13. Davim J.P., Sreejith P.S., Silva J., "Turning of brass using minimum quantity of lubricant (MQL) and flooded lubricant conditions", Materials and Manufacturing Processes, vol. 22, p. 45-50, 2007.
14. Dhar N.R., Islam M. W., Islam S., Mithu M. A.H., "The influence of minimum quantity of lubrication (MQL) on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel", Journal of Materials Processing Technology, vol. 171, p. 93-99, 2006.
15. Dhar N.R., Kamruzzaman M., Ahmed M., "Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel", Journal of Materials Processing Technology, vol. 172, p. 299-304, 2006.
16. Dhar N.R., Ahmed M.T., Islam S., "An experimental investigation on effect of minimum quantity lubrication in machining AISI 1040 steel", International Journal of Machine Tools and Manufacture, vol. 47, p. 748-753, 2007.
17. Diniz A.E., Ferreira J.R., Filho F.T., "Influence of refrigeration/lubrication condition on SAE 52100 hardened steel turning at several cutting speeds", International Journal of Machine Tools and Manufacture, vol. 43, p. 317-326, 2003.
18. Gaitonde V.N., Karnik S.R., Davim J.P., "Selection of optimal MQL and cutting conditions for enhancing machinability in turning of brass", Journal of Materials Processing Technology, vol. 204, p. 459-464, 2008.
19. Gaitonde V.N., Karnik S.R., Davim J.P., "Study on the influence of MQL and cutting conditions on machinability of brass using artificial neural network", International Journal of Materials and Product Technology, vol. 37, no. 1-2, 2010, p. 155-171.
20. Hanyu H., Kamiya S., Murakami Y., Saka M., "Dry and semi-dry machining using finely crystallized diamond coating cutting tools", Surface and Coatings Technology, vol. 173-174, p. 992-995, 2003.
21. Heinemann R., Hinduja S., Barrow G., Petuelli G. "Effect of MQL on the tool life of small twist drills in deep-hole drilling", International Journal of Machine Tools and Manufacture, vol. 46, p. 1-6, 2006.
22. Iqbal A., Ning H., Khan I., Liang L., Dar N.U., "Modeling the effects of cutting parameters in MQL-employed finish hardmilling process using D-optimal method", Journal of Materials Processing Technology, vol. 199, p. 379-390, 2008.
23. Itoigawa F., Childs T.H.C., Nakamura T., Belluco W., "Effects and mechanisms in minimal quantity lubrication machining of an aluminum alloy", Wear, vol. 260, no. 3, p. 339-344, 2006.
24. Kamata Y., Obikawa T., "High speed MQL finishturning of Inconel 718 with different coated tools", Journal of Materials Processing Technology, vol. 192, p. 281-285, 2007.
25. Kang M.C., Kim K.H., Shin S.H., Jang S.H., Park J.H., Kim C., "Effect of the minimum quantity of lubrication in highspeed end milling of AISI D2 cold-worked die steel (62 HRC) by coated carbide tools", Surface & Coatings Technology, vol. 202, p. 5621-5624, 2008.
26. Kelly J.F., Cotterell M.G., "Minimal lubrication machining of aluminum alloys", Journal of Materials Processing Technology, vol. 120, p. 327-334, 2002.
27. Khan N.M.A., Mithu M.A.H., Dhar N.R., "Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oil-based cutting fluid", Journal of Materials Processing Technology, vol. 209, p. 5573-5583, 2009.
28. Kishawy H.A., Dumitrescu M., Ng E.-G., Elbestawi, M.A., "Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminum alloys", International Journal of Machine Tools and Manufacture, vol. 45, p. 219-227, 2005.
29. Klocke F., Eisennblatter G., "Dry cutting", Annals of CIRP, vol. 46, no. 2, p. 519-526, 1997.
30. Kumar, P., Barua P.B., Gaindhar J.L., "Quality optimization (multi-characteristic) through Taguchi's technique and utility concept", Quality and Reliability Engineering International, vol. 16, p. 475-485, 2000.
31. Liao Y.S., Lin H.M., Chen Y.C., "Feasibility study of the minimum quantity lubrication in high-speed end milling of NAK80 hardened steel by coated carbide tool", International Journal of Machine Tools and Manufacture, vol. 47, p. 1667-1676, 2007.
32. Lopez De Lacalle L.N., Angulo C., Lamikiz A., Sanchez J.A. "Experimental and numerical investigation of the effect of spray cutting fluids in high speed milling", Journal of Materials Processing Technology, vol. 172, p. 11-15, 2006.
33. Lugscheider E., Knotek O., Barimani C., Leyendecker T., Lemmer O., Wenke R., "Investigations on hard coated reamers in different lubricant free cutting operations", Surface & Coatings Technology, vol. 90, p. 172-177, 1997.
34. Mendes O.C., Avila R.F., Abrao A.M., Reis P., Davim J.P. "The performance of cutting fluids when machining aluminum alloys", Industrial Lubrication and Tribology, vol. 58, no. 5, p. 260-268, 2006.
35. Montgomery D.C., Design and Analysis of Experiments, John Wiley & Sons, New York, 1996.
36. Nandi A.K., Davim J.P., "A study of drilling performances with minimum quantity of lubricant using fuzzy logic rules", Mechatronics, vol. 19, p. 218-232, 2009.
37. Obikawa T., Kamata Y., Shinozuka J., "High-speed grooving with applying MQL", International Journal of Machine Tools and Manufacture, vol. 46, p. 1854-1861, 2006.
38. Obikawa T., Kamata Y., Asano Y., Nakayama K., Otieno A.W., "Micro-liter lubrication machining of Inconel 718", International Journal of Machine Tools and Manufacture, vol. 48, p. 1605-1612, 2008.
39. Obikawa T., Asano Y., Kamata Y., "Computer fluid dynamics analysis for efficient spraying of oil mist in finishturning of Inconel 718", International Journal of Machine Tools and Manufacture, vol. 49, p. 971-978, 2009.
40. Phadke M.S., Quality Engineering using Robust Design, Prentice Hall, Englewood Cliffs, NJ, 1989.
41. Rahman M., Kumar A.S., Manzoor-Ul-Salam, "Evaluation of minimal quantities of lubricant in end milling", International Journal of Advanced Manufacturing Technology, vol. 18, p. 235-241, 2001.
42. Ross P.J., Taguchi Techniques for Quality Engineering, McGraw Hill, Singapore, 1996.
43. Schalkoff R.B., Artificial Neural Networks, McGraw-Hill, Singapore, 1997.
44. Silva L.R., Bianchi E.C., Catai R.E., Fusse R.Y., Franca T.V., Agular P.R., "Study on the behavior of the minimum quantity lubricant - MQL technique under different lubricating and cooling conditions when grinding 4340 steel", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 27, no. 2, p. 192-199, 2005.
45. Silva L.R., Bianchi E.C., Fusse R.Y., Catai R.E., Franca T.V., Agular P.R., "Analysis of surface integrity for minimum quantity lubricant - MQL in grinding", International Journal of Machine Tools and Manufacture, vol. 47, p. 412-418, 2007.
46. Sokovic M., Mijanovic K., "Ecological aspects of the cutting fluids and its influence on quantifiable parameters of the cutting processes", Journal of Materials Processing Technology, vol. 109, p. 181-189, 2001.
47. Sreejith P.S., Ngoi B.K.A., "Dry machining - machining of the future", Journal of Materials Processing Technology, vol. 101, p. 289-293, 2000.
48. Sun J., Wong Y.S., Rahman M., Wang Z. G., Neo K.S., Tan C.H., Onozuka H., "Effects of coolant supply methods and cutting conditions on tool life in end milling titanium alloy", Machining Science and Technology, vol. 10, no. 3, p. 355-370, 2006.
49. Tasdelen B., Wikblom B., Ekered S., "Studies on minimum quantity lubrication (MQL) and air cooling at drilling", Journal of Materials Processing Technology, vol. 200, p. 339-346, 2008.
50. Tasdelen B., Thordenberg H., Olofsson D., "An experimental investigation on contact length during minimum quantity lubrication (MQL) machining", Journal of Materials Processing Technology, vol. 203, p. 221-231, 2008.
51. Thepsonthi T., Hamdi M., Mitsui K., "Investigation into minimal-cutting fluid application in high-speed milling of hardened steel using carbide mills", International Journal of Machine Tools and Manufacture, vol. 49, p. 156-162, 2009.
52. Wagabayashi T., Sato H., Inasaki I., "Turning using extremely small amount of cutting fluid", JSME International Journal, Series C, vol. 41, no. 1, p. 143-148, 1998.
53. Weinert K., Inasaki, I., Sutherl J.W., Wakabayashi T., "Dry machining and minimum quantity lubrication", Annals of CIRP, vol. 53, no. 2, p. 1-23, 2004.
54. Zeilmann R.P., Weingaertner W.L., "Analysis of temperature during drilling of Ti6Al4V with minimal quantity of lubricant", Journal of Materials Processing Technology, vol. 179, p. 124-127, 2006.