Air Quality in Manufacturing

Environmentally Conscious Manufacturing

Volumn , Issue , 2007, Pages 145-178

  Rivera, Julio L ^a   Michalek, Donna J ^a   Sutherland, John W ^a  

^a MICHIGAN TECHNOLOGICAL UNIVERSITY   (United States)

Author keywords

Air quality in manufacturing; Environmentally responsible particulate mitigation elimination; Health effects and regulations; Particulate characterization in aerosol behavior and toxicological effects; Welding fumes and wet machining

Indexed keywords

EID: 84889430553     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470168196.ch7     Document Type: Chapter

References (104)

1. K. Haapala, J. L. Rivera, and J. W. Sutherland, "Environmentally Responsible Process Selection Via Life Cycle Analysis," Proceedings of 2006 ISFA 2006 International Symposium on Flexible Automation Osaka, Japan, July 10-12, 2006.
2. U.S. Census, "1997 Economic Census: Company Statistics Series," U.S. Census Bureau, September 2001.
3. W. C. Hinds, 2nd ed., Aerosol Technology, John Wiley, New York, 1999.
4. J. E. Peterson, Industrial Health, Prentice-Hall, Englewood Cliffs, NJ, 1977.
5. University of Michigan Health System, "Illustration of the Respiratory System," http:// www.med.umich.edu/1libr/aha/aha respirat art.htm. Accessed in June 2006.
6. G. Wright, "The Pulmonary Effects of Inhaled Inorganic Dust," Patty's Industrial Hygiene and Toxicology, G. Clayton and F. Clayton, ed., John Wiley, New York, 1991.
7. F. C. Lu, and S. Kacew, 4th ed. Basic Toxicology, Taylor & Francis, New York, 2002.
8. D. Dockery, C. Pope III, X. Xu, J. Spengler, J. Ware, M. Fay, B. Ferris, and F. Speizer, "Mortality Risks of Air Pollution: a Prospective Cohort Study," New England Journal of Medicine, 329, 1753-1759 (1993).
9. G. Oberdörster, "Pulmonary Effects of Inhaled Ultrafine Particles," Int. Arch. Occup. Environ. Health, 74(1) 1-8 (2001).
10. M. Utell and M. Frampton, "Acute Health Effects of Ambient Air Pollution: The Ultrafine Particle Hypothesis," J. Aerosol Med. 13(4), 355-359 (2000).
11. R. Vincent, P. Kumarathasan, P. Geogan, S. G. Bjarnason, J. Guenette, D. Berube, I. Y. Adamson, S. Desjardins, R. T. Burnett, R. J. Miller, and B. Battistini, Research Report 104: Inhalation Toxicology of Urban Ambient Particulate Matter: Acute Cardiovascular Effects in Rats, Health Effects Institute, Cambridge, MA, 2001.
12. D. Lison, C. Lardot, F. Huaux, G. Zanetti, and B. Fubini, "Influence of Particle Surface Area on the Toxicity of Insoluble Manganese Dioxide Dust," Arch. Toxicology, 71, 725-729, (1997).
13. T. Osunsanya, G. Prescott, and A. Seaton, "Acute Respiratory Effects of Particles: Mass or number?" Occup. Envion. Med, 58 (3), 154-159 (2001).
14. K. R. Spurny, "On the Physics, Chemistry and Toxicology of Ultrafine Anthropogenic, Atmospheric Aerosols (UAAA): New Advances," Toxicol. Lett., 96-97, 253-261 (1998).
15. J. H. Vincent and C. F. Clements, "Ultrafine Particles in Workplace Atmospheres," Phil. Trans. R. Soc. Lond. A., 358, 2673-2682 (2000).
16. A. D. Brandt, Industrial Health Engineering, John Wiley, New York, 1947.
17. NAS, "Airborne Particles," National Academy of Science, National Research Council. Subcommittee on Airborne Particulate, 1979.
18. P. Baron, "Generation and Behavior of Airborne Particles (Aerosols)," National Institute of Occupational Health and Safety, http://www.cdc.gov/niosh/topics/aerosols/pdfs/ Aerosol 101.pdf. Retrieved on June 2006.
19. A. D. Maynard, and E. D. Kuempel, "Airborne Nanostructured Particles and Occupational Health," Journal of Nanoparticle Research, 7, 587-614 (2005).
20. U.S. Environmental Protection Agency, "Basic Concepts in Environmental Sciences," http://www.epa.gov/eogapti1/module3/index.htm. Accessed on June 2006.
21. J. Dasch, J. D'Arcy, A. Gundrum, J. W. Sutherland, J. Johnson, and D. Carlson, "Characterization of Fine Particles from Machining in Automotive Plants," Journal of Occupational and Environmental Hygiene, 2, 1-14 (2005).
22. ISO, International Organization for Standarization, "Air Quality-Particle Size Fraction Definitions for Health-related Sampling," ISO 7708, 1995.
23. N. T. Jenkins and T. W. Eagar, "Chemical Analysis of Welding Fumes," supplement to the Welding Journal (June 2005).
24. D. M. Brown, M. R. Wilson, W. MacNee, V. Stone, and K. Donaldson, "Size-Dependent Proinflammatory Effects of Ultrafine Polystyrene Particles: A Role for Surface Area and Oxidative Stress in the Enhanced Activity of Ultrafines," Toxicology and Applied Pharmacology, 175, 191-199 (2001).
25. K. Donaldson, X. Y. Li, and W. MacNee, "Ultrafine (nanometer) Particle Mediated Lung Injury," Journal of Aerosol Science, 29, 553-560 (1998).
26. B. S. Cohen and C. S. McCammon, 9th ed., Air Sampling Instruments, ACGIH. ISBN: 1-882417-39-9, 2001.
27. F. A. Patty, "Industrial Hygiene: Restrospect and Prospect," Patty's Industrial Hygiene and Toxicology, G. Clayton and F. Clayton, ed., John Wiley, New York, 1978.
28. D. W. Dockery and C. A. Pope III, "Acute Respiratory Effects of Particulate Air Pollution," Annu. Rev. Public Health, 15, 107-132 (1994).
29. HEI, "Airborne Particles and Health: HEI Epidemiologic Evidence," Health Effects Institute (HEI) Perspectives (June, 2001).
30. G. Oberdörster, R. M. Gelein, J. Ferin, and B. Weiss, "Association of Particulate Air Pollution and Acute Mortality: Involvement of Ultrafine Particles?" Inhal. Toxicol, 7 111-124 (1995).
31. Bureau of Labor Statistics, "Work Place Injuries and Illnesses in 2004," U.S. Department of Labor, http://www.bls.gov/iif/oshwc/osh/os/osnr0023.pdf. Retrieved on March 2006.
32. NIOSH, "Work-Related Lung Diseases," U.S. National Institute of Occupational Health and Safety, U.S. Department of Health, Center for Disease Control and Prevention. http://www.cdc.gov/niosh/docs/pib/pdfs/2004PIB-lungDis.pdf. 2004.
33. A. M. Knaapen, P. J. A. Borm, C. Albrecht, and R. P. F. Schins, "Inhaled Particles and Lung Cancer Part A: Mechanism," International Journal of Cancer, 109, 799-809 (2004).
34. C. Dasenbrock, L. Peters, O. Creutzenberg, and U. Heinrich, "The Carcinogenic Potency of Carbon Particles with and without PAH after Repeated Intratracheal Administration in the Rat," Toxicol Lett. Vol. 88(1-3):15-21, 1996.
35. K. J. Nikula, M. B. Snipes, E. B. Barr, W. C. Griffith, R. F. Henderson, J. L. Mauderly, "Comparative Pulmonary Toxicities and Carcinogenicities of Chronically Inhaled Diesel Exhaust and Carbon Black in F344 Rats," Fundam. Appl. Toxicol, 25, 80-94 (1995).
36. UCLA, "Welding Fumes: What You Need to Know," UCLA Labor Occupational Safety & Health Program (LOSH), 2003.
37. B. A. Racette, L. McGee-Minnich, S. M. Moerlein, J. W. Mink, T. O. Videen, and J. S. Perlmutter, "Welding-related Parkinsonism: Clinical Features,Treatment, and Pathophysiocology," Neurology, 56, 8-13 (2001).
38. B. Ackroyd, W. D. Compton, and S. Chandrasekhar, "Reducing the Need for Cutting Fluids in Drilling by Means of the Modulation Assisted Drilling," Proceedings of the Symposium on Manufacturing Science and Engineering, ASME Bound Vol.-MED-Vol. 8: pp. 405-411, 1998.
39. NIOSH, "NIOSH Origins and Mission," U.S. National Institute of Occupational Health and Safety. http://www.cdc.gov/niosh/about.html. Accessed in June 2006b.
40. W. E. MacCormik, "Legislation and Legislative Trends," Patty's Industrial Hygiene and Toxicology, G. Clayton and F. Clayton, ed., John Wiley, New York, 1978.
41. OSHA, U.S. Occupational Safety and Health Administration. http://www.dol.gov/. Accessed in April 2006.
42. U.S. Environmental Protection Agency, "Particulate Matter," http://www.epa.gov/oar/ particlepollution/index.html. Retrieved on March 2006.
43. G. Oberdörster, Z. Sharp, V. Atudorei, A. Elder, R. Gelein, W. Kreyling, and C. Cox., "Translocation of Inhaled Ultrafine Particles to the Brain," Inhalation Toxicology, 16 (6-7), 437-45 (June 2004).
44. J. A. Schey, 3rd ed., Introduction to Manufacturing Processes, McGraw-Hill, New York, 2000.
45. W. Chan, K. L. Gunter, and J. W. Sutherland, "An Experimental Study into the Fume Particulate Produced by the Shielded Metal Arc Welding Process," Transactions of the NAMRI/SME, 30, 581-588 (2002). Also appeared as SME Technical Paper, No. MS02- 2001.
46. V. E. Spiegel-Ciobanu, "Ultrafine Particles Created by Welding and Allied Processes," Ultrafine Aerosols at Workplaces, Workshop held on August 21-22 at the BG Institute for Occupational Safety and Health-BA, Sankt Augustin, Germany, 2003.
47. A.T. Zimmer and P. Biswas, "Characterization of Aerosols Resulting from Arc Welding Processes," Journal of Aerosol Science, 32, 993-1008 (2001).
48. Battelle-Columbus Laboratories, "The Welding Environment, Parts IIA, IIB, and III;" American Welding Society, Miami, 1973.
49. P. Hewett, "The Particle Size Distribution, Density and Specific Surface Area of Welding Fumes from SMAW and GMAW Mild and Stainless Steel Consumables," American Industrial Hygiene Association Journal, 56(2), 128-135 (1995).
50. D. Stephenson, G. Seshadri, and J. M. Veranth, "Workplace Exposure to Submicron Particle Mass and Number Concentrations from Manual Arc Welding of Carbon Steel," AIHA Journal, 64, 516-521 (2003).
51. L. De Chiffre, "Function of Cutting Fluids in Machining," Lubrication Engineering, 44, 514-518 (1999).
52. M. A. El Baradie, "Cutting Fluids: Part 1. Characterization," Journal of Materials Processing Technology, 56, 786-797 (1996).
53. P. S. Sheng and S. Oberwalleney, "Life Cycle Planning of Cutting Fluids-A Review," Journal of Manufacturing Science and Technology, 119(11), 791-800 (1997).
54. Y. Yue, J. W. Sutherland, and W. W. Olson, "Cutting Fluid Mist Formation in Machining via Atomization," ASME Design for Manufacturing and Assembly, 89, 37-46 (1996).
55. K. L. Gunter, and J. W. Sutherland, "An Experimental Investigation into the Effect of Process Conditions on the Mass Concentration of Cutting Fluid Mist in Turning," Journal of Cleaner Production, 7(5), 341-350 (1999).
56. J. P. Byers, Metalworking Fluids, Marcel Dekker, Inc, 1994.
57. D. P. Adler, W. W-S. Hii, D. J. Michalek, and J. W. Sutherland, "Examining the Role of Cutting Fluids in Machining and Efforts to Address Associated Environmental/Health Concerns," Machining Science and Technology, 10(1) (2006).
58. R. B. Aronson, "Why Dry Machining?" Manufacturing Engineering, 114(1), 33-36 (1995).
59. C. Granger, "Dry Machining's Double Benefit," Machinery, 152(3873), 14-15, 17, 19-20, 1994.
60. H. Popke, T. Emmer, and J. Steffenhagen, "Environmentally Clean Metal Cutting Processes- Machining on the Way to Dry Cutting," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 213(3), 329-332 (1999).
61. P. Young, G. Byrne, and M. Cotterell, "Manufacturing and the Environment," The International Journal of Advanced Manufacturing Technology, 13(7), 488-493 (1997).
62. J. W. Sutherland, V. N. Kulur, and N. C. King, "Experimental Investigation of Air Quality in Wet and Dry Turning," CIRP Annals-Manufacturing Technology, 49(1), 61-64 (2000).
63. J. W. Martyny, M. D. Hoover, M. Mroz, M. Margaret, K. Ellis, L. A. Maier, K. Sheff, L. S. Newman, "Aerosol Generated During Beryllium Machining," Journal Occup Environ Med, 42(1), 8-18 (2000).
64. F. S. Rosenthal and B. L. Yeagy, "Characterization of Metalworking Fluid Aerosols in Bearing Grinding Operations," American Industrial Hygiene Association Journal, 62, 379-382 (2001).
65. A. T. Zimmer and A. D. Maynard, "Investigation of the Aerosol Produced by a Highspeed Hand-held Grinder Using Various Substrates," Annals of Occupational Hygiene, 46(8), 663-672 (2002).
66. U.S. Environmental Protection Agency, "Office of the Compliance Sector Notebook Project: Profile of the Metal Casting Industry," EPA/310-R-97-004, 1998.
67. M.-C. O. Chang, J. C. Chow, J. G. Watson, C. Glowacki, S. A. Sheya, and A. Prabhu, "Characterization of Fine Particles Emissions from Casting Processes," Aerosol Science and Technology, 39, 947-959 (2005).
68. S. U. Behm, K. L. Gunter, and J. W. Sutherland, "An Investigation into the Effects of Process Parameter Settings on Air Emission Characteristics in the Lost Foam Casting Process," AFS Transactions, 2003. Paper #03-031, appeared on CD-ROM.
69. CERP, "Casting Emission Reduction Program," http://www.cerp-us.org/. Accessed on June 2006.
70. I. Poliski, "Carbon Black: The State of Art," Modern Paint and Coatings, 89 40-41 (1999).
71. K. Gardiner, I. A. Calvert, M. J. A. Tongeren van, J. M. Harrington, "Occupational Exposure to Carbon Black in Its Manufacture: Data from 1987 to 1992," Annals of Occupational Hygiene, 40, 65-77 (1996).
72. T. A. J. Kuhlbusch, S. Neumann, and H. Fissan, "Number Size Distribution, Mass Concentration, and Particle Composition of PM1, PM 2.5, and PM10 in Bag Filling Areas of Carbon Black Production," Journal of Occupational and Environmental Hygiene, 1, 660-671 (2004).
73. C. P. Lyons and D. Mark, "Development and Testing of a Procedure to Evaluate the Dustiness of Powders and Dusts in Industrial use," Health and Safety Executive Contract Research Report No62/1994, HSE Books, ISBN 0 7176 0727 5, 1994.
74. S. J. Cooper and D. Leith, "Evaporation of Metalworking Fluid Mist in Laboratory and Industrial Mist Collectors," American Industrial Hygiene Association Journal, 59(1), 45-51 (1998).
75. P. C. Raynor, S. Copper, and D. Leith, "Evaporation of Polydisperse Multicomponent Oil Droplets," American Industrial Hygiene Association, 57(12), 1128-1136 (1996).
76. D. Leith, P. C. Raynor, M. G. Boundy, and S. J. Cooper, "Performance of Industrial Equipment to Collect Coolant Mist," American Industrial Hygiene Association Journal, 57(12), 1142-1148 (1996).
77. D. A. Cozzens, W. W. Olson, and J. W. Sutherland. "An Experimental Investigation into the Effect of Cutting Fluid Conditions on the Boring of Aluminium Alloys," Concurrent Product and Process Eng., ASME Bound Volume-MED 1(85): 251-257 (1985).
78. D. Hands, M. J. Sheehan, B. Wong, and H. B Lick, "Comparison of Metalworking Fluid Mist Exposures from Machining with Different Levels of Machine Enclosure," American Industrial Hygiene Association, 57(12), 1173-1178 (1996).
79. S. R. Woskie, M. A. Virji, D. Kriebel, S. R. Sama, D. Eberiel, D. K. Milton, S. K. Hammond, and R. Moure-Eraso, "Exposure Assessment for a Field Investigation of Acute Respiratory Effects of Metalworking Fluids. I. Summary of Findings," American Industrial Hygiene Association Journal, 57(12), 1154-1162 (1996).
80. W. A. Heitbrink, J. M. Yacher, G. J. Deye, and A. B. Spencer, Mist Control at a Machining Center, Part 1: Mist Characterization, American Industrial Hygiene Association, 61(2), 275-281, 2000.
81. E. Gulari, C. Manke, J. Smolinski, R. Marano, and L. Toth, "Polymer Additives as Mist Suppressants in Metalworking Fluids: Laboratory and Plant Studies," The Industrial Metalworking Environment: Assessment and Control, Symposium Proceedings, November 13-16, pp. 294-300, 1995.
82. R. S. Marano, J. M. Smolinski, and C. W. Manke, et al., in Polymer Additives as Mist Suppressants in Metal Cutting Fluids, Technical Paper FoMoCo, presented at 52nd annual meeting, Kansas City, Missouri (May 1997), also appeared as SAE technical paper No.980097 (1997).
83. S. Kalhan, S. Twining, R. Denis, R. Marano, and R. Messick, "Polymer Additives as Mist Suppressants in Metalworking Fluids Part IIa: Preliminary Laboratory and Plant Studies-Water Soluble Fluids," SAE 980097, pp. 47-51, 1997.
84. NIOSH, "Respirators," U.S. National Institute of Occupational Health and Safety, U.S. Department of Health, Center for Disease Control and Prevention http://www.cdc.gov/ niosh/npptl/topics/respirators/. Accessed in June 2006a.
85. K. L. Gunter, and J. W. Sutherland, "Environmental Attributes of Manufacturing Process," Handbook of Environmental Conscious Manufacturing, ed. C. N. Madu. Boston: Kluwer Academic Publishers, 2001.
86. R. E. Devor, T. H. Chang, and J. W. Sutherland, Statistical Quality Design and Control: Contemporary Concepts and Methods, Macmillan, New York, 1992.
87. A. J. Filipovic, and J. W. Sutherland, "Development of a Magnetostrictive-Actuated Tool Holder for Dry Deep Hole Drilling," Transactions of NAMRI/SME, 33, 437-444, 2005.
88. McCabe, J., "Advances in Dry Machining of Aluminum," Cutting Tool Engineering (February 2002).
89. H. G. Toews, W. D. Compton, and S. Chandrasekhar, "A Study of the Influence of Superimposed Low-Frequency Modulation on the Drilling Process," Precision Engineering, 1(22), 1-9 (1998).
90. S. S. Kinare, D. J. Michalek, C. Ju, J. Sun, and J. W. Sutherland, "An Experimental Investigation of Cutting Fluid Mist Removal via a Novel Atomizer System," Environmental Sustainability in the Mobility Industry: Technology and Business Challenges, SAE SP-1865, March 2004.
91. J. M. DeSimone, "Practical Approaches to Green Solvents," Science, 297 (August 2002).
92. F. Klocke, A. Schulz, and K. Gerschwiler, "Saubere Fertigungstechnolgien-Ein Wettbewerbsvoteil von morgen? Aachener Werkzeug-maschinen-Kolloquium," Conference Proc. June 13-14, pp. 4.35-4.108, 1996.
93. K. Weinert, I. Inasaki, J. W. Sutherland, and T. Wakabayashi, "Dry Machining and Minimum Quantity Lubrication," Annals of CIRP, 53(2), 511-537 (2004).
94. U.S. Congress, "21st Century Nanotechnology Research and Development Act," Public Law 108-153. December 2003, Washington, D.C. 2003.
95. NSTC, National Science and Technology Council, "Nanotechnology Shaping the World Atom by Atom," http://www.wtec.org/loyola/nano/IWGN.Public.Brochure/. 1999. Accessed in May 2006.
96. HSE, 2004. Health and Safety Executive, "Nanoparticles: An Occupational Hygiene Review." http://www.hse.gov.uk/research/rrpdf/rr274.pdf. Revisited February 2006.
97. G. Oberdörster, E. Oberdörster, and J. Oberdörster, "Nanotoxicology: An Emerging Discipline from Studies of Ultrafine Particles," Environmental Health Perspectives, 113(7) (2005).
98. A. D. Maynard, P. A. Baron, M. Foley, A. A. Shvedova, E. R. Kisin, and V. Castranova, "Exposure to Carbon Nanotube Material: Aerosol Release during the Handling of Unrefined Single-walled Carbon Nanotube Material," J Toxicol Environ Health A, 67(1), 87-107 (2004).
99. D. L. MacIntosh and J. D. Spengler, "Human Exposure Assessment," International Programme on Chemical Safety, United Nations Program, International Labour Organization, and the World Health Organization. Geneva, 2000.
100. A. I. Awoskia-Olumo, K. L. Trangle, and L. F. Fallon, "Microorganism-induced skin disease in workers exposed to metalworking fluids," Occup. Med., 53, 35-40 (2003).
101. C. J. Van der Gast, C. J. Knowles, M. A. Wright, and I. P. Thompson, "Identification and Characterization of Bacterial Populations of an In-use Metal-working Fluid by Phenotypic Methodology," Int. Biodet. Biodeg, 47, 113-123 (2001).
102. R.J. Wallace Jr., Y. Zhang, R. W. Wilson, L. Mann, and H. Rossmoore, "Presence of a Single Genotype of the Newly Described Species Mycobacterium immunogenum in Industrial Metalworking Fluids Associated with Hypersensitivity Penumonitis," Appl. Environ. Microbiol, 68, 5580-5584 (2002).
103. D. M. Lewis, E. Janotka, M. P. Whitmer, and T. A. Bledsoe, "Detection of Microbial Antigens in Metal Working Fluids," Int. Biodeter. Biodegrad, 47, 89-94 (2001).
104. A. T. Simpson, M. Stear, J. A. Groves, M. Piney, S. D. Bradley, S. Stagg, and B. Crook, "Occupational Exposure to Metalworking Fluid Mist and Sump Fluid Contaminants," Ann. Occ. Hyg, 47, 17-30 (2003).