Micromachining Using Electrochemical Discharge Phenomenon

Micromachining Using Electrochemical Discharge Phenomenon

Volumn , Issue , 2009, Pages

  Wüthrich, Rolf ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 77958088394     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (142)

1. K. Allesu: Electrochemical Discharge Phenomenon in Manufacturing Processes, PhD Thesis, Indian Institute of Technology, Kanpur (1988).
2. Allesu K., Ghosh A., Muju M.K. "Preliminary qualitative approach of a proposed mechanism of material removal in electrical machining of glass.". European Journal Mech. Eng. 1992, 36:202.
3. Ammagnat H. "Contribution à l'étude de l'interrupteur Wehnelt.". Comptes rendus hebdomadaires des séances de l'Académie des Sciences 1899, CXXVIII:988.
4. Angerstein-Kozlowska H., Conway B.E., Sharp B.A. "The real conditions of electrochemically oxidized platinum surfaces. Part I. Resolution of component process.". Electroanalytical Chemistry and Interfacial Electrochemistry 1973, 43:9.
5. Azumi K., Mizuno T., Akimotot T., Ohmori T. "Light emission from Pt during high-voltage cathodic polarisation.". Journal of the Electrochemical Society 1999, 146:3374-3377.
6. I. Basak: Electrochemical Discharge Machining Mechanism and a Scheme for Enhancing Material Removal Capacity, PhD Thesis, Indian Institute of Technology, Kanpur (1991).
7. Basak I., Ghosh A. "Mechanism of spark generation during electrochemical discharge machining: a theoretical model and experimental verification.". Journal of Materials Processing Technology 1996, 62:46-53.
8. Basak I., Ghosh A. "Mechanism of material removal in electrochemical discharge machining: a theoretical model and experimental verification.". Journal of Materials Processing Technology 1997, 71:350.
9. Becquerel E. "Note sur le passage des courants électriques au travers des gaz incandescents.". Comptes rendus hebdomadaires des séances de l'Académie des Sciences 1867, LXV:1097-1099.
10. Bergonié J. "Les rayons X et leurs applications médicales.". Revue philomatique de Bordeaux et du Sud-Ouest 1900, 49-68.
11. Bhattacharyya B., Doloi B.N., Sorkhel S.K. "Experimental investigations into electrochemical discharge machining (ECDM) of non-conductive ceramic materials.". Journal of Materials Processing Technology 1999, 95:145.
12. Boissonneau P., Byrne P. Journal of Applied Electrochemistry 2000, 30:767-775.
13. Bouchotte E. "Dialyse des courants d'induction.". Comptes rendus hebdomadaires des séances de l'Académie des Sciences 1867, LXV:759-760. and 995-998.
14. Braithwaite N.St.J. Plasma Sources Sci. Technol. 2000, 9:517-527.
15. Broadbent S.R., Hammersley J.M. Proceedings of the Cambridge Philosophical Society 1957, 53:629-641. MR 19:989e.
16. Bruggeman D.A.G. Annalen der Physik 1935, 24:636-664.
17. Calwell E.W. "A new liquid interrupter.". Electr. Rev. (N. Y.) 1899, 34:277.
18. Chin Kwie Joe J.M., Janssen L.J.J., van Strelen S.J.D., Verbunt J.H.G., Sluyter W.M. Electrochemica Acta 1988, 33:769-779.
19. 3 by electro-chemical discharge machining (ECDM) process using abrasive electrode with pulsed DC supply.". International Journal of Machine Tools & Manufacture 2007, 47:2061-2070.
20. Collins F. The Radio Amateur's Hand Book 1922, Thomas Y. Corwell Co., New York.
21. Cook N.H., Foote G.B., Jordan P., Kalyani B.N. "Experimental studies in electro-machining.". Trans. ASME, Journal of Engineering for Industry 1973, 945-950.
22. Daridon A., Fascio V., Lichtenberg J., Wüthrich R., Langen H., Verpoorte E., De Rooij N.F. Fresenius J. Anal. Chem. 2001, 371:261-269.
23. Didar T.F., Dolatabadi A., Wüthrich R. "Characterization and modeling of 2D-glass micro-machining by spark-assisted chemical engraving (SACE) with constant velocity.". Journal of Micromechanics and Microengineering 2008, 18.
24. Didar T.F., Dolatabadi A., Wüthrich R. "Local hardness and density variation in glass substrates machined with Spark Assisted Chemical Engraving (SACE).". Materials Letters 2009, 63:51-53.
25. Fifty Years of X-Ray Diffraction 1962, International Union of Crystallography. P.P. Ewald (Ed.).
26. Compton K.T. "A study of the Wehnelt electrolytic interrupter.". Physical Review 1910, 30:161.
27. D'Arsonval J.A. "Interrupteur électrolytique.". Comptes rendus hebdomadaires des séances de l'Académie des Sciences 1899, CXXVIII:529.
28. Wüthrich R., Despont B., Maillard P., Bleuler H. "Improving drilling speed in Spark Assisted Chemical Engraving (SACE) by tool vibration.". Journal of Micromechanics and Microengineering 2006, 16:N28-N31.
29. Eigeldinger J., Vogt H. Electrochemica Acta 2000, 45:4449-4456.
30. Esashi M., Matsumoto Y., Shoji S. "Absolute pressure sensors by air-tight electrical feedthrough structure.". Sensors and Actuators 1990, A21-A23:1048-1052.
31. Fascio V., Wüthrich R., Viquerat D., Langen H. International Symposium on Micromechatronics and Human Science (MHS'99) 1999, 179-183.
32. V. Fascio: Etude de la microstructuration du verre par tincelage assist par attaque chimique: une approche electrochimique, PhD Dissertation Thesis 2691, Swiss Federal Institute of Technology (EPFL), Lausanne (2002).
33. Fascio V., Langen H.H., Bleuler H., Comninellis Ch. "Investigation of the spark assisted chemical engraving.". Electrochemistry Communications 2003, 5:203-207.
34. Fascio V., Wüthrich R., Bleuler H. "Spark assisted chemical engraving in the light of electrochemistry.". Electrochimica Acta 2004, 49:3997.
35. Fizeau H., Foucault L. "Recherches sur l'intensité de la lumière émise par le charbon dans l'expérience de Davy.". Annales de Chimie et de Physique 1844, XI:370. 3ème série.
36. R.A. Fressenden: "Receiver for electromagnetic waves." US Patent No. 727,331 (1903).
37. Fox R. "The John Scott Medal.". Proceedings, American Philosophical Society 1968, 112:416.
38. Gabrielli C., Huet F., Keddam M., Sahar A. Journal of Applied Electrochemistry 1989, 19:683-696.
39. Gadalla A.M., Bozkurt B., Faulk N.M. "Modeling of thermal spalling during electrical discharge machining of titanium diboride.". Journal of the American Society 1991, 74:801-806.
40. Gautam N., Jain V.K. "Experimental investigations into ECSD process using various tool kinematics.". International Journal of Machine Tools and Manufacture 1998, 38:15.
41. Ghosh A. "Electrochemical discharge machining: principle and possibilities.". Sādhanā 1997, 22:435-447.
42. Glas J.P., Westwater J.W. International Journal of Heat and Mass Transfer 1964, 7:1427-1443.
43. Grove W.R. "On the electro-chemical polarity of gases.". Philosophical Transactions of the Royal Society of London 1852, 142:87.
44. Gubkin J. Annalen der Physik 1887, 32:114.
45. Ch. Guilpin: Dissertation Thesis, Univérsité Paris VI (1975).
46. Guilpin Ch., Garbaz-Olivier J. "Analyse de la lumière émise aux électrodes pendant les effets d'électrodes, dans des solutions aqueuses d'électrolyte.". Spectrochimica Acta 1977, 32B:155.
47. Guilpin Ch., Garbaz-Olivier J. Spectrochimica Acta 1977, 32B:155-164.
48. Guggenheim E.A. "The conceptions of electrical potential differences between two phases and individual activities of ions.". Journal of Physical Chemistry 1929, 33:842.
49. Hammersley J.M. Ann. Math. Statist 1957, 28:790-795.
50. Han M.-S., Min B.-K., Lee S.J. "Improvement of surface integrity of electro-chemical discharge machining process using power-mixed electrolyte.". Journal of Materials Processing Technology 2007, 191:224.
51. Han M.-S., Min B.-K., Lee S.J. "Modeling gas film formation in electrochemical discharge machining process using a side-insulated electrode.". Journal of Micromechanics and Microengineering 2008, 18:045019.
52. Hessenbruch A. "Rutherford's 1901 experiment on radiation energy and his creation of a stable detector.". Archive for History of Exact Sciences 2000, 54:403.
53. Hickling A., Ingram M.D. "Contact glow discharge electrolysis.". Transaction of the Faraday Society 1964, 60:783.
54. Hickling A., Ingram M.D. "Glow discharge electrolysis.". Journal of Electroanalytical Chemistry 1964, 8:65.
55. L. Hof: "3D-microstructuring of glass." Master's Thesis, TU Delft, Netherlands (2003).
56. Hoho P. "Phénomène calorifique produit par le courant électrique au contact d'un solide et un liquide.". La lumière électrique 1894, 52:165.
57. Humphrey W.J. "The Wehnelt electrolytic break.". Physical Review 1899, 9:30.
58. Jain V.K., Rao P.S., Choudhury S.K., Rajurkar K.P. "Experimental investigations into travelling wire electrochemical spark machining (TW-ECSM) of composites.". Trans. ASME, Journal of Engineering for Industry 1991, 113:75.
59. Jain V.K. "ECSM-a new way to machine polymer composites.". Proc. INCARF-93 Conf. December 1993, IIT, Delhi.
60. Jain V.K., Dixit P.M., Pandey P.M. "On the analysis of the electrochemical spark machining process.". International Journal of Machine Tools and Manufacture 1999, 39:165.
61. Jain V.K., Chak S.K. "Electrochemical spark trepanning of alumina and quartz.". Machining Science and Technology 2000, 4:277-290.
62. Jain V.K., Choudhury S.K., Ramesh K.M. "On the machining of alumina and glass.". International Journal of Machine Tools and Manufacture 2002, 42:1269-1276.
63. Jain V.K., Adhikary S. "On the mechanism of material removal in electrochemical spark machining of quartz under different polarity conditions.". Journal of Materials Processing Technology 2008, 200:460-470.
64. Jaeger H.M., Nagel S.R. Science 1992, 255:1524.
65. M. Jalali, P. Maillard, R. Wüthrich: "Towards a better understanding of glass gravity-feed micro-hole drilling with electrochemical discharges." Journal of Micromechanics and Microengineering, accepted.
66. Janssen L.J.J., van Stralen S.J.D. Electrochemica Acta 1981, 26:1011-1022.
67. Janssen L.J.J. Electrochemica Acta 1989, 34:161-169.
68. Jones S.F., Evans G.M., Glavin K.P. "Bubble nucleation from gas cavities-a review.". Advances in Colloid and Interface Science 1999, 80:27-50.
69. Kasteleyn P., Fortuin C. Journal of the Physical Society of Japan 1969, 26(Suppl.):11-14.
70. Kellogg H.H. "Anode effect in aqueous electrolysis.". Journal of the Electrochemical Society 1950, 97:133.
71. Kim D.-J., Ahn Y., Lee S.-H., Kim Y.-K. "Voltage pulse frequency and duty ratio effects in a electrochemical discharge microdrilling process of Pyrex glass.". International Journal of Machine Tools and Manufacturing 2006, 46:1064.
72. Klupathy E. "Zur Theorie des Wehneltunterbrechers.". Annalen der Physik 1902, 9:147.
73. Knight H.de B. The Arc Discharge: Its Application to Power Control 1960, Chapman & Hall Ltd, London.
74. Kulkarni A., Sharan R., Lal G.K. "An experimental study of discharge mechanism in electrochemical discharge machining.". International Journal of Machine Tools and Manufacturing 2002, 42:1121-1127.
75. Kulkarni A., Sharan Ft., Lal G.K. "Measurement of temperature transients in the electrochemical discharge machining process.". Temperature: Its measurement and Control in Science and Industry 2003, 7:1069.
76. Kurafuji H., Suda K. "Electrical discharge drilling of glass.". Annals of the CIRP 1968, 16:415.
77. Kondepudi D., Prigogine I. Modern Thermodynamics-From Heat Engines to Dissipative Structures 1999, John Wiley & Sons.
78. Lal A., Bleuler H., Wüthrich R. "Fabrication of metallic nanoparticles by electrochemical discharges.". Electrochemistry Communications 2008, 10:488-491.
79. Lee E.S., Howard D., Liang E., Collins S.D., Smith R.L. "Removable tubing interconnects for glass-based micro-fluidic systems made using ECDM.". Journal of Micromechanics and Microengineering 2004, 14:535-541.
80. Liao Y.-S., Peng W.-Y. "Study of hole-machining on Pyrex wafer by electrochemical discharge machining (ECDM).". Materials Science Forum 2006, 505-507:1207.
81. Liger-Belair G., Vignes-Adler M., Voisin C., Robillard B., Jeandet Ph. "Kinetics of gas discharging in a glass of champagne: the role of nucleation sites.". Langmuir 2002, 18:1294-1301.
82. Lim H.-J., Lim Y.-M, Kim S.H., Kwak Y.K. "Self-aligned micro tool and electrochemical discharge machining (ECDM) for ceramic materials.". Proceedings of SPIE 2001, 4416:348-353.
83. Ludewig P. "Zur Theorie des Wehneltunterbrechers.". Annalen der Physik 1909, 29:175.
84. Maillard P., Despont B., Bleuler H., Wüthrich R. "Geometrical characterization of micro-holes drilled in glass by gravity-feed with spark assisted chemical engraving (SACE).". Journal of Micromechanics and Microengineering 2007, 17:1343-1349.
85. Masuzawa T., Fujino M., Kobayashi K., Suzuki T. Annals of the CIRP 1985, 34:431.
86. Mousa M., Allagui A., Ng H.D., Wüthrich R. "The effect of thermal conductivity of the tool electrode in spark assisted chemical engraving gravity-feed micro-drilling.". Journal of Micromechanics and Microengineering 2009, 19. accepted (November 2008).
87. Maxwell J.C. A Treatise, on Electricity and Magnetism 1892, Vol. 1:440. Clarendon Press, Oxford. 3rd edn.
88. M. Jalali, P. Maillard, S.P. Mishra, L. Kadem, R. Wüthrich: "Modeling gravity feed micro hole drilling by electrochemical discharge." 2nd International Conference on Micro-Manufacturing, September 10-13, 2007, Greenville, South Carolina, USA.
89. Morse H.W. "Spectra from the Wehnelt interrupter. I.". Astrophysical Journal 1904, 19:162.
90. Morse H.W. "Spectra from the Wehnelt interrupter. II.". Astrophysical Journal 1905, 21:223.
91. V.V. Nesarikar, V.K. Jain, S.K. Choudhury: "Travelling wire electrochemical spark machining of thick sheets of Kevlar-epoxy composites." Proceedings of the Sixteenth AIMTDR Conference (1994), pp. 672-677.
92. Peng W.Y., Liao Y.S. "Study of electrochemical discharge machining technology for slicing non-conductive brittle materials.". Journal of Materials Processing Technology 2004, 149:363-369.
93. R. Popular: Phénomènes électriques dans les gaz, Monographies Dunod 41, Paris (1963).
94. Quet "Sur divers phénomènes électriques.". Comptes rendus hebdomadaires des séances de l'Académie des Sciences 1853, XXXVI:1012.
95. Raizer Y.P. Gas Discharge Physics 1991, Springer Verlag, Berlin.
96. Rose M.E., Korff S.S. Phys. Rev. 1941, 59:850.
97. Sarkar B.R., Doloi B., Bhattacharyya B. "Parametric analysis on electrochemical discharge machining of silicon nitride ceramics.". International Journal of Advanced Manufacturing Technology 2006, 28:873-881.
98. Sengupta S.K., Singh R., Srivastava A.K. Journal of the Electrochemical Society 1998, 145:2209-2213.
99. Simon H.Th. "Das Wirkungsgesetz des Wehnelt-Unterbrechers.". Wiedemann's Ann. (Annalen der Physik) 1899, 68:273.
100. Singh Y.P., Jain V.K., Kumar P., Agrawal D.C. "Machining piezoelectric (PZT) ceramics using electrochemical spark machining (ECSM) process.". Journal of Materials Processing Technology 1996, 58:24-31.
101. Stauffer D., Aharony A. Introduction to Percolation Theory 1998, Taylor & Francis, London.
102. S. Tandon: Machining of Composites-A New Approach, M.Tech. Thesis, IIT Kanpur, India (July 1987).
103. Tandon S., Jain V.K., Kumar P., Rajurkar K.P. "Investigations into machining of composites.". Precision Engineering 1990, 12:227-238.
104. Tokura H., Kondoh I., Yoshikswa M. "Ceramic material processing by electrical discharge in electrolyte.". Journal of Materials Science 1989, 24:991.
105. Tsuchiya H., Inoue T., Miyazaiki M. "Wire electro-chemical discharge machining of glasses and ceramics.". Built. Japan Soc. of Prec. Engg. 1985, 19:73.
106. Tsutsumi C., Okano K., Suto T. "High quality machining of ceramics.". Journal of Materials Processing Technology 1993, 37:639.
107. Valognes J.C., Bardet J.P., Mergault P. Spectrochimica Acta 1988, 43B:799-809.
108. van der Willigen V.S.M. "Ueber Licht und Wärme-Erscheinungen bei kräfitigen galvanischen Batterie; Bildung des Lichtbogens zwischen Metall und Flüssigkeit, und Auftreten von Licht an einer der in die Flüssigkeit getauchten Elektroden.". Annalen der Physik 1854, 169:285.
109. Venczel J. Electrochimica Acta 1970, 15:1909-1920.
110. Violle J., Chassagny M. "Revue des travaux récents en électricité: Sur l'électrolyse.". Comptes rendus hebdornadaires des séances de l'Académie des Sciences 1889, CVIII:284.
111. Vogt H. Comprehensive Treatise of Electrochemistry 1983, 6:445.
112. Vogt H. Journal of Applied Electrochemistry 1983, 13:87-88.
113. Vogt H. Electrochemica Acta 1984, 29:167-173.
114. Vogt H. Electrochemica Acta 1984, 29:175-180.
115. Vogt H. Electrochemica Acta 1989, 34:1429-1432.
116. Vogt H. Journal of Applied Electrochemistry 1999, 29:137-145.
117. Vogt H., Thonstad J. "Review of the causes of anode effects in aluminium electrolysis.". Aluminium 2003, 79:98-102.
118. Voller A., Walter B. "Ueber die Vorgänge im Wehnelt'schen elektrolytischen Unterbrecher.". Wiedemann's Ann. (Annalen der Physik) 1899, 68:526.
119. Wehnelt A. "Ein elektrolytischer Stromunterbrecher.". Wiedemann's Ann. (Annalen der Physik) 1899, 68:233. The article was originally published in.
120. Eletrotechnische Zeitschrift 1899, 4:76.
121. West J., Jadhav A. "ECDM methods for fluidic interfacing through thin glass substrates and the formation of spherical microcavities.". Journal of Micromechanics and Microengineering 2007, 17:403-409.
122. Wolffenbuttel R.F. Silicon Sensors and Circuits: On-Chip Compatibility. Sensor Physics and Technology Series 1995, Chapman & Hall, London.
123. Wüthrich R., Fascio V., Viquerat D., Langen H. "In situ measurement and micro-machining of glass.". International Symposium on Micromechatronics and Human Science 1999, 185. (MHS'99), Nagoya.
124. R. Wüthrich: "Spark assisted chemical engraving-a stochastic modelling approach." Dissertation Thesis 2776, Swiss Federal Institute of Technology, EPF Lausanne (2003).
125. Wüthrich R., Baranova E.A., Bleuler H., Comninellis Ch. "A phenomenological model for macroscopic deactivation of surface processes.". Electrochemistry Communications 2004, 6:1199-1205.
126. Wüthrich R., Comninellis Ch., Bleuler H. "Bubble evolution on vertical electrodes under extreme current densities.". Electrochimica Acta 2005, 50:5242.
127. Wüthrich R., Hof L.A., Lal A., Fujisaki K., Bleuler H., Mandin Ph., Picard G. "Physical principles and miniaturization of Spark Assisted Chemical Engraving (SACE).". Journal of Micromechanics and Microengineering 2005, 15:268-275.
128. Wüthrich R., Fujisaki K., Couthy Ph., Hof L.A., Bleuler H. "Spark assisted chemical engraving (SACE) in microfactory.". Journal of Micromechanics and Microengineering 2005, 15:276-280.
129. Wüthrich R., Fascio V. "Machining of non-conductive materials using electrochemical discharge phenomenon-an overview.". International Journal of Machine Tools and Manufacture 2005, 45:1095-1108.
130. Wüthrich R., Hof L. "The gas film in spark assisted chemical engraving (SACE)-a key element for micro-machining applications.". International Journal of Machine Tools and Manufacture 2006, 46:828.
131. Wüthrich R., Spaelter U., Bleuler H. "The current signal in Spark Assisted Chemical Engraving (SACE), what does it tell us?". Journal of Micromechanics and Microengineering 2006, 16:779.
132. Wüthrich R., Spaelter U., Wu Y., Bleuler H. "A systematic characterisation method for gravity feed micro-hole drilling in glass with Spark Assisted Chemical Engraving (SACE).". Journal of Micromechanics and Microengineering 2006, 16:1891.
133. Yang C.T., Ho S.S., Yan B.H. "Micro hole machining of borosilicate glass through electrochemical discharge machining (ECDM).". Key Engineering Materials 2001, 196:149-166.
134. Yang C.T., Song S.L., Yan B.H., Huang F.Y. "Improving machining performance of wire electrochemical discharge machining by adding SiC abrasive to electrolyte.". International Journal of Machine Tools and Manufacture 2006, 46:2044-2050.
135. Zastawny A. Nucl. Instr. and Meth. in Phys. Res. 1997, A385:239.
136. Zaytsev I., Aseyev G. Properties of Aqueous Solution of Electrolytes 1992, CRC Press, Boca Raton.
137. Zheng Z.-P., Su H.-C., Huang F.-Y., Yan B.-H. "The tool geometrical shape and pulse-off time of pulse voltage effects in a Pyrex glass electrochemical discharge microdrilling process.". Journal of Micromechanics and Microengineering 2007, 17:265.
138. Zheng Z.-P., Cheng W.-H., Huang F.-Y., Yan B.-H. "3D microstructuring of Pyrex glass using the electrochemical discharge machining process.". Journal of Micromechanics and Microengineering 2007, 17:960.
139. Macintyre J. "Wehnelt's new interrupter: improvement in X-ray apparatus.". Journal of Laryngology, Rhinology, and Otology 1899, XIV:169-170.
140. Zallen R. The Physics of Amorphous Solids 1998, Wiley-VCH.
141. A. Morrison, L. Rodrigues, R. Wüthrich: "Reducing variability in spark assisted chemical engraving gravity feed drilling of glass." 1st Microsystems and Nanoelectronics Research Conference (MNRC 2008), October 15, 2008, Ottawa, Canda (available on IEEE Explorer).
142. R. Wüthrich, A. Lal, H. Bleuler: "A table-top set-up for nano-particles production with electrochemical discharges." 5th International Workshop on Microfactories, October 25-27, Besençon, France.