MSEC 2009 state-of-art paper: Micro/nano-technology applications for manufacturing systems and processes

Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009

Volumn 2, Issue , 2009, Pages 295-317

  Obikawa, Toshiyuki ^a   Postek, M T ^b   Dornfeld, David ^c   Liu, Richard ^d   Komanduri, Ranga ^e   Guo, Yuebin ^g   Shi, Jing ^f   Cao, Jian ^h   Gogotsi, Yury ⁱ   Mochalin, Vadym ⁱ   Zhou, Jack ⁱ   Yang, Xiaoping ^j   Li, Xiaochun ^k  

^a INSTITUTE OF INDUSTRIAL SCIENCE   (Japan)

^b Dept of Computer Sc and Engg National Institute of Science and Technology   (United States)

^c UNIVERSITY OF CALIFORNIA   (United States)

^d PURDUE UNIVERSITY   (United States)

^e OKLAHOMA STATE UNIVERSITY   (United States)

^f North Dakota State University   (United States)

^g UNIVERSITY OF ALABAMA   (United States)

^h Northwestern University   (United States)

ⁱ Drexel University   (United States)

^j CUMMINS INC   (United States)

^k University of Wisconsin Madison   (United States)

more..

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTATIONAL SIMULATION; MACHINING SURFACES; MACRO SCALE; MANUFACTURING APPLICATIONS; MANUFACTURING PROCESS; MANUFACTURING SYSTEM; MICRO-FEATURE; MICROPATTERNED; MULTI-SCALE SIMULATION; NANO SCALE; NANO-DIAMONDS; SCIENCE AND ENGINEERING; SENSOR APPLICATIONS; TECHNOLOGY APPLICATION; TECHNOLOGY IMPACT; TIME AND SPACE;

MACHINING; TECHNOLOGY;

MANUFACTURE;

EID: 77953192728     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/MSEC2009-84330     Document Type: Conference Paper

References (185)

1. Obikawa, T., J. Japan Soc. Grind. Eng., 42, 2 (1998) pp. 51-55 (in Japanese)
2. Eaton, W.P. and Smith, J.H., (1997), "Micromachined pressure sensors: Review and recent developments," Proc. SPIE-Int. Soc. Opt. Eng., vol. 3046, pp. 30-41
3. Gao, R., and Li, Z., (2004), "Micromachined microsensors for manufacturing," Instrumentation & Measurement Magazine, IEEE, vol. 7, no. 2, pp. 20-26.
4. Chatzandroulis, S., Tsoukalas, D., and Neukomm, P.A., (2000), "A miniature pressure system with a capacitive sensor and a passive telemetry link for use in implantable applications," J. MEMS, vol. 9, no. 1, pp. 18-23 (Pubitemid 30581717)
5. Chavan, A.V., and Wise, K.D., (2001), "Batch-processed vacuum-sealed capacitive pressure sensors", J. MEMS., vol. 10, no. 4, pp. 580-588
6. Fuller, L.F., and Sudirgo, S., (2003), "Bulk micromachined pressure sensor," Proc. Biennial University/Government/Industry Microelectronics Symp., pp. 317-320
7. Guckel, H., (1991), "Surface micromachined pressure transducers," Sens. Actuat, A, Phys., vol. 28, no. 2, pp. 133-146.
8. Wang, C.C., Gogoi, B.P., Monk, D.J., and Mastrangelo, C.H., (2000), "Contamination-insensitive differential capacitive pressure sensors," J. MEMS, vol. 9, no. 4, pp. 538-543.
9. Zhou, J., Dasgupta, S., Kobayashi, H., Wolff, J.M., Jackson, H.E., and Boyd, J.T., (2001), "Optically interrogated MEMS pressure sensors for propulsion applications," Opt. Eng., vol. 40, no. 4, pp. 598-604 (Pubitemid 32432776)
10. Biefeld, V., Buhrdorf, A., and Binder, J., (2000), "Laterally driven accelerometer fabricated in single crystalline silicon," Sens. Actuators A: Phys., vol. 82, no. 1, pp. 149-154
11. Burrer, C., Esteve, J., and Lora-Tamayo, E., (1996), "Resonant silicon accelerometers in bulk micromachining technology - An approach," J. MEMS, vol. 5, no. 2, pp. 122-130 (Pubitemid 126607079)
12. Liu, C.H., and Kenny, T.W., (2001), "A high-precision, wide-bandwidth micromachined tunneling accelerometer," J. MEMS, vol. 10, no. 3, pp. 425-433
13. Seshia, A.A., Palaniapan, M., Roessig, T.A., Howe, R.T., Gooch, R.W., Schimert, T.R., and Montague, S., (2002), "A vacuum packaged surface micromachined resonant accelerometer," J. MEMS, vol. 11, no. 6, pp. 784-793
14. Eccardt, P., Niederer, K., and Fischer, B., (1997), "Micromachined transducers for ultrasound applications," in Proc. Ultrasonics Symp., Toronto, Canada, vol. 2, pp. 1609-1618.
15. Dornfeld, D. A. Lee, Y. and Chang, A., (2003), "Monitoring of Ultraprecision Maching Processes," Int. J. Adv. Manuf. Technol., vol 21, pp. 571-578.
16. Dornfeld D.A., and Cai, H.G., (1984), "An investigation of grinding and wheel loading using acoustic emission," Transactions ASME, J. of Engineering for Industry, 106(1), pp. 28-33.
17. Tonshoff, H.K., Wulfsberg, J.P., Kals, H.J., Konig , W., and Van Luttervelt, C.A., (1998), "Development and trends in monitoring and control of machining processes," Annals CIRP, 37(2), pp. 611-622
18. Obikawa, T., et al.: Int. J. Japan Soc. Prec. Eng., 30, 1 (1996) pp. 29-34
19. Obikawa, T., et al.: J. Mat. Proc. Tech., 63 (1997) pp. 211-216
20. Basti, A., et al.: Int. J. Mach. Tools Manuf., 47, 5 (2007) pp. 793-798
21. Obikawa, T., et al.: Key Eng. Mat. 329 (2007) pp. 681-686
22. Cheng, X., and Li, XC, "Development of metal embedded micro sensors by diffusion bonding and application on Milling Process Monitoring", ASME Transaction Journal of Manufacturing Science and Engineering, Volume 130, Issue 6 (2008), 061010 (9 pages)
23. Werschmoeller, D., Li, XC, "Embedding of micro thin film sensors into polycrystalline cubic boron nitride (PCBN) for tooling applications via diffusion bonding", in press, Int. J. Mechatronics and Manufacturing Systems (2009)
24. Zhang, X., and Li, XC, "Design, Fabrication and Characterization of Metal Embedded Micro Photonic Sensors", ASME Transaction Journal of Manufacturing Science and Engineering, Vol. 130, 031104 (2008)
25. Choi, H., Konishi, H., Xu, H., and Li, XC, "Embedding of Micro Thin Film Sensors in Sapphire by Diffusion Bonding", Journal of Micromechanics and Microengineering, 17 (2007) 2248-2252
26. Zhang, X., Choi, H., and Li, XC, "Design, Fabrication and Characterization of Metal Embedded Thin Film Thermocouples with Various Film Thickness and Junction Sizes", Journal of Micromechanics and Microengineering, vol.16, 2006, pp. 900-905
27. Cheng, X., Datta, A., Choi, H., Zhang, X., and Li, XC, "Study on Embedding and Integration of Micro Sensors into Metal Structures for Manufacturing Applications", ASME Journal of Manufacturing Science and Engineering, April 2007, pp.416-424
28. Datta, A., Choi, H., and Li, XC, "Batch Fabrication and Characterization of Embedded Thin Film Thermocouples in Metal", Journal of The Electrochemistry Society, Volume 153, Issue 5, 2006, pp. H89-H93
29. Postek, M. T., Vladar, A. E., Jones, S. and Keery, W. J. 1993. Interlaboratory study on the lithographically produced scanning electron microscope magnification standard prototype. NIST J. Res. 98:447-467
30. Vijayaraghavan, A., and Dornfeld, D., 2007, "Procedural design of imprint rolls for fluid pathway fabrication". In Proceedings of 33rd Design Automation Conference.
31. Whitesides, G. M., 2006, "The origins and the future of microfluidics." Nature 442, 7101, pp. 368-373.
32. Fourment, L., Balan, T., and Chenot, J., 1996, "Optimal design for non-steady- state metal forming processes. II: Application of shape optimization in forging". International Journal for Numerical Methods in Engineering 39, 1, pp. 51-65.
33. Ou, H., Armstrong, C., and Price, M., 2003, "Die shape optimisation in forging of aerofoil sections". Journal of Materials Processing Techology. 132, 1-3, pp. 21-27. (Pubitemid 35437478)
34. Vijayaraghavan, A., and Dornfeld, D., 2008, "Subdivision surfaces for procedural design of imprint rolls". In Symposium on Solid and Physical Modeling, pp. 327-332
35. Elber, G., Sayegh, R., and Barequet, G., 2005. "Two-dimensional visibility charts for continuous curves". In Proceedings of Shape Modeling and Applications, pp. 206-215.
36. Priyadarshi, A. K., and Gupta, S. K., 2004. "Geometric algorithms for automated design of multi-piece permanent molds". Computer-Aided Design, 36(3), March, pp. 241-260.
37. Balasubramaniam, M., Laxmiprasad, P., Sarma, S., and Shaikh, Z., 2000. "Generating 5-axis NC roughing paths directly from a tesselated representation". Computer-Aided Design, 32, pp. 261-277.
38. McMains, S., and Chen, X., 2006. "Finding undercut-free parting directions for polygons with curved edges". Journal of Computing and Information Science in Engineering, 6(1), pp. 60-68
39. CM Niemeyer. Nanoparticles, Proteins, and Nucleic Acids: Biotechnology Meets Materials Science. Angew. Chem., Int. Ed. 2001, 40, 4128-4158.
40. H. Huang, E. Pierstorff, E. Osawa, D. Ho. Protein-mediated assembly of nanodiamond hydrogels into a biocompatible and biofunctional multilayer nanofilm. ACS NANO, 2008, 2(2), 203-212.
41. Yushin G.N., et al., Effect of sintering on structure of nanodiamond, Diamond & Related Materials, 2005, 14, 1721-1729.
42. Wei L., et al., Nanodiamond MALDI support for enhancing the credibility of identifying proteins. Talanta, 2008, 74, 1363-1370.
43. AP Puzyr, AV Baron, KV Purtov, EV Bortnikov, NN Skovelev, OA Mogilnaya, VS Bondar. Nanodiamodns with novel properties: A biological study. Diamond & Related Materials. 2007, 16, 2124-2128.
44. O. A. Shenderova, G. McGuire, Nanocrystalline Diamond, in Nanomaterials handbook, Y. Gogotsi, Editor. 2006, CRC/Taylor and Francis: Boca Raton, p. 203-237.
45. S. Osswald, G. Yushin, V. Mochalin, S. Kucheyev, Y. Gogotsi, Control of sp(2)/sp(3) carbon ratio and surface chemistry of nanodiamond powders by selective oxidation in air. J. Am. Chem. Soc., 2006, 128(35), 11635-11642.
46. O. A. Shenderova, V. V. Zhirnov, D. W. Brenner, Carbon nanostructures. Crit. Rev. Solid State Mat. Sci., 2002, 27(3-4), 227-356.
47. S. Berber, Y. Kwon, D. Tománek, Unusually high thermal conductivity of carbon nanotubes. Physical Review Letters, 84(20), 4613-4616.
48. Amanda M. Schrand, Jay Johnson, Liming Dai, Saber M. Hussain, John J. Schlager, Lin Zhu, Yiling Hong, and Eiji Osawa, Cytotoxicity and Genotoxicity of Carbon Nanomaterials in T.J. Webster (ed.), Safety of Nanoparticles, Nanostructure Science and Technology, Springer Science+Business Media, LLC 2009, p.159-187
49. H. Huang, E. Pierstorff, E. Osawa, D. Ho, Active nanodiamond hydrogels for chemotherapeutic delivery. Nano Lett, 2007, 7(11), 3305-3314.
50. S. Mitura, K. Mitura, P. Niedzielski, P. Louda, V. V. Danilenko, Nanocrystalline diamond, its synthesis, properties and applications. Journal of Achievements in Materials and Manufacturing Engineering, 2006, 16(1-2), 9-16.
51. K. Bakowicz-Mitura, G. Bartosz, S. Mitura, Influence of diamond powder particles on human gene expression. Surface and Coatings Technology, 2007, 201(13), 6131-6135.
52. R. Lam, M. Chen, E. Pierstorff, H. Huang, E. J. Osawa, D. Ho, Nanodiamond-embedded microfilm devices for localized chemotherapeutic elution. ACS Nano, 2008, 2(10), 2095-2102.
53. K. K. Liu, C. L. Cheng, C. C. Chang, J. I. Chao, Biocompatible and detectable carboxylated nanodiamond on human cell. Nanotechnology, 2007, 18, 325102.
54. A. M. Schrand, H. J. Huang, C. Carlson, J. J. Schlager, E. Osawa, S. M. Hussain, L. M. Dai, Are diamond nanoparticles cytotoxic? J. Phys. Chem. B, 2007, 111(1), 2-7.
55. A. P. Puzyr, A. V. Baron, K. V. Purtov, E. V. Bortnikov, N. N. Skobelev, O. A. Moginaya, V. S. Bondar, Nanodiamonds with novel properties: A biological study. Diamond Relat. Mater., 2007, 16, 2124-2128.
56. P. Cherukuri, S. M. Bachilo, S. H. Litovsky, R. B. Weisman, Near-infrared fluorescence microscopy of single-walled carbon nanotubes in phagocytic cells. J. Am. Chem. Soc., 2004, 126(48), 15638-15639.
57. P. Cherukuri, C. J. Gannon, T. K. Leeuw, H. K. Schmidt, R. E. Smalley, S. A. Curley, R. B. Weisman, Mammalian pharmacokinetics of carbon nanotubes using intrinsic near-infrared fluorescence. Proc. Natl. Acad. Sci. U. S. A., 2006, 103, 18882-18886.
58. K. I. Winey, R. A. Vaia, Polymer nanocomposites. Mrs Bulletin, 2007, 32, 314-319.
59. X. Michalet, F. F. Pinaud, L. A. Bentolila, J. M. Tsay, S. Doose, J. J. Li, G. Sundaresan, A. M. Wu, S. S. Gambhir, S. Weiss, Quantum dots for live cells, in vivo imaging, and diagnostics. Science, 2005, 307, 538-544.
60. J. Kreuter, Influence of the surface properties on nanoparticle-mediated transport of drugs to the brain. J. Nanosci. Nanotechnol., 2004, 4(5), 484-488.
61. R. H. Muller, C. M. Keck, Drug delivery to the brain-realization by novel drug carriers. J. Nanosci. Nanotechnol., 2004, 4(5), 471-483.
62. A. Kruger, Y. J. Liang, G. Jarre, J. Stegk, Surface funtionalisation of detonation diamond suitable for biological applications. J. Mater. Chem., 2006, 16, 2322-2328.
63. Y. Liu, Z. N. Gu, J. L. Margrave, V. N. Khabashesku, Functionalization of nanoscale diamond powder: fluoroalkyl- amino- and amino acid-nanodiamond derivatives. Chem. Mat., 2004, 16(20), 3924-3930.
64. V. Mochalin, S. Osswald, C. Portet, G. Yushin, C. Hobson, M. Havel, Y. Gogotsi, High Temperature Functionalization and Surface Modification of Nanodiamond Powders. In Materials Research Society Symposium Proceedings Boston, MA, USA, 2007, Vol. 1039, 1039-P11-03.
65. A. Krueger, The structure and reactivity of nanoscale diamond. J. Mater. Chem., 2008, 18, 1485-1492.
66. V. Mochalin, Y. Gogotsi, Wet Chemistry Synthesis of Hydrophobic Blue Fluorescent Nanodiamond, Submitted to J. Am. Chem. Soc., 2009, 131 (13), 4594-4595.
67. A. Kruger, F. Kataoka, M. Ozawa, T. Fujino, Y. Suzuki, A. E. Aleksenskii, A. Y. Vul, E. Osawa, Unusually tight aggregation in detonation diamond: identification and disintegration. Carbon, 2005, 43, 1722-1730
68. I. F. Stowers, J. Belak, D. A. Lucca, R. Komanduri, R. L. Rhorer, T. Moriwaki, K. Okuda, N. Ikawa, S. Shimada, H. Tanaka, T. A. Dow, and J. D. Drescher, Molecular dynamics simulation of the chip forming process in single crystal copper and comparison with experimental data, Proc. of the ASPE Annual Conference , (1991) 100-103.
69. Komanduri, R. and L. M. Raff, "A Review on the molecular dynamics (MD) simulation of machining at the atomic scale," Proc. of the I. Mech. E. (Lon) 215 B (2001) 1639-1672
70. N. Chandrasekaran, A. Noori-Khajavi, L. M. Raft and R. Komanduri, "A new method for MD simulation of nanometric cutting," Philosophical Magazine, 77(1), 7-26, (1997)
71. Komanduri, R., Chandrasekaran, N., and L. Raff, "Effect of tool geometry in nanometric cutting: an MD simulation approach," Wear, 218, 84-97, (1998).
72. Komanduri, R., Chandrasekaran, N., and L. M. Raff, "Some aspects of machining with negative rake tools simulating grinding: an MD simulation approach," Philosophical Magazine B, 79(7) (1999) 995-1968
73. Komanduri, R. Chandrasekaran, N., and L. M. Raff, "MD simulation of single crystal aluminum - effect of crystal orientation and direction of cutting," Wear, 242 (2000) 60-88.
74. Komanduri, R. Chandrasekaran, N., and L. M. Raff, "MD simulation of nanometric cutting of silicon," Philosophical Magazine, B81 (2001) 1989-2019.
75. Komanduri, R., Raff, L. M., and R. Narulkar, "Monte Carlo simulation of nanometric cutting," Philosophical Magazine 84 (2003) 1155-1183
76. Komanduri, R., M. Lee, and L. M. Raff, "The significance of normal rake in oblique machining," Int. J of Machine Tools and Manufacturing 44 (2004) 1115-1124
77. Komanduri, R. Chandrasekaran, N., and L. M. Raff, "MD simulation of exit failure in nanometric cutting," Material Science and Engineering, A 311 (2001) 1-12.
78. Chandrasekaran, N., Stokes, D., Raff, L. M., and R. Komanduri, "Molecular dynamics (MD) simulation of milling," (unpublished) (2009)
79. Narulkar, R., Bukkapatnam, S., Raff, L. M., and R. Komanduri, "Graphitization as a precursor for wear of diamond in machining iron: A molecular dynamics (MD) investigation," Computational Materials Science 45 (2008) 358-366
80. E.K. Henricksen, 1951, "Residual Stresses in Machined Surfaces," Trans. ASME, 73, p. 69.
81. C.R. Liu and M.M. Barash, 1976, "The Mechanical State of the Sublayer of a Surface Generated by Chip-removal Process, part1: Cutting with a Sharp Tool," Trans. ASME, J. Eng. Ind., 98/4, pp. 1192-1201.
82. C.R. Liu and M.M. Barash, 1976, "The Mechanical State of the Sublayer of a Surface Generated by Chip-removal Process, part2: Cutting with a Tool with Flank Wear," Trans. ASME, J. Eng. Ind., 98/4, pp. 1202-1208.
83. C.R. Liu and M.M. Barash, 1982, "Variables Governing Patterns of Mechanical Residual Stress in a Machined Surface," Trans. ASME, J. Eng. Ind., 104/3, pp. 257-264.
84. Field M, Koster WP, Kohls JB, Snider RE, Maranchik Jr J., 1970, Machining Of High Strength Steels With Emphasis On Surface Integrity, Tech. Report AFMDC 70-71, Metcut Research Associates, Inc.
85. Koster WP, Filed M, Fritz LJ, Gatto LR, Kahles JF., 1970, "Surface Integrity of Machined Structural Components," Tech. Report AFML-TR-70-111, Metcut Research Associates, Inc.
86. Shi, J. and Liu, C.R., "On predicting material softening effect in hard turning - Part I Construction of material softening model," Journal of Manufacturing Science and Engineering, 127(3), pp.476-483, 2005.
87. Shi, J. and Liu, C.R., 2005, "On predicting material softening effect in hard turning - Part II Finite element modeling and verification," Journal of Manufacturing Science and Engineering, 127(3), pp. 484-491.
88. Randall, T., Walter, J.J.H., Scattergood, R., and Nemanich, R., "High pressure phase transformation and ductility in diamond turned single crystal silicon", accessed in May 2009, http://www.pec.ncsu.edu/research/ projects/phase-transfermation/1656.pdf
89. To, S., Lee, W.B., and Zhu, Y.H., 2002, "Ultra-precision machining induced surface structural changes of Zn-Al alloy," Materials Science and Engineering A 325, pp. 497-502.
90. Tay, A.A.O, 1993, "A review of methods of calculating machining temperature," Journal of Materials Processing Technology, 36, pp. 225-257.
91. Marcio, B.S. and Wallbank, J., 1999, "Cutting temperature: prediction and measurement methods - a review," Journal of Materials Processing Technology, 88, pp. 195-202.
92. Wang, J.Y., 1998, A new methodology for analyzing the heat transfer and thermal damage considering tool flank wear in finish hard machining, PhD dissertation, Purdue University.
93. Blondeau, R., Maynier, P. and Dollet, J, 1975, "Estimation of Hardness, Strength and Elastic Limit of C- and Low-Alloy Steels From Their Composition and Heat Treatment," Mem. Science Review Metallurgy, 72(11), pp. 759-769.
94. Fedoseev, O.B. and Malkin, S., 1991, "Analysis of tempering and rehardening for grinding of hardened steels," Transactions of the ASME, 113, pp. 388-394.
95. Zhang, L. and Tanaka, H., 1997, "Towards a deeper understanding of wear and friction on the atomic scale-a molecular dynamics analysis," Wear, 211, pp. 44-53.
96. Tanaka, H., Shimada, S., and Anthony, L., 2007, "Requirements for ductile-mode machining based on deformation analysis of mono-crystalline silicon by molecular dynamics simulation," CIRP Annals, 56(1), pp.53-56.
97. Cai, M.B., Li, X.P, and Rahman, M. 2007, "Study of the mechanism of nanoscale ductile mode cutting of silicon using molecular dynamics simulation," International Journal of Machine Tools and Manufacture, 47(1), pp. 75-80.
98. Han, X.S., Hu, Y.Z., and Yu, S., 2008, "Molecular dynamics analysis micro-mechanism of ductile machining single crystal by means of nanometric cutting technology," European Physical Journal Applied Physics, 42(3), pp. 255-262.
99. Sun, X., Chen, S., Cheng, K., Huo, D., and Chu W., 2006, "Multiscale simulation on nanometric cutting of single crystal copper," Journal of Engineering Manufacture, 220, pp. 1217-1222.
100. Shiari, B., Miller, R.E., Klug, D.D., 2007, "Multiscale simulation of material removal processes at the nanoscale," Journal of the Mechanics and Physics of Solids, 55, 2384-2405.
101. Rudd, R.E. and Broughton, J.Q., 2005, "Coarse-grained molecular dynamics: Nonlinear finite elements and finite temperatures," Physics Review B 72, 144104.
102. Murthy J.Y., Narumanchi, S.V.J., Pascual-Guitierrez, J.A., Wang, T.J, Ni, C.J., Mathur, S.R., 2005, "Review of multiscale simulation in submicron heat transfer," International Journal for Multiscale Computational Engineering, 3(1), pp. 5-31.
103. Pelaz, L., Marques, L.A, Lopez, P., Santos, I., and Aboy, M., 2006, "Multiscale modeling of radiation damage and annealing in Si," Nuclear Instruments and Methods in Physics Research B, 255, pp. 95-100.
104. Van Luttervelt, C.A., Childs, T.H.C., Jawahir, I.S., Klocke, F., Venuvinod, P.K., 1998, "Present Situation and Future Trends in Modeling of Machining Operations - Progress Report of the CIRP Working Group 'Modeling of Machining Operations", Ann. CIRP, 47/2, pp.587-626.
105. Oxley, P.L.B., 1989, The Mechanics of Machining, Ellis Horwood Limited, Chichester, England, UK.
106. Stevenson, R., 1997, "Study on the Correlation of Workpiece Mechanical Properties from Compression and Cutting Tests," J. Mach. Sci. Tech., 1(1), pp. 67-79. (Pubitemid 127550533)
107. Shatla, M. and Altan T., 2000, "Determination of Flow Stress for Machining and Practical Applications of FEM and Analytical Modeling," Proc. 2000 NSF Design & Manufacturing Res. Conf.
108. Spaans, C., 1971, "The Fundamentals of Three-Dimensional Chip Curl, Chip Breaking and Chip Control," Ph.D. Dissertation, Delft University of Technology.
109. Stevenson, M. G. and Oxley, P. L. B., 1975, "Torsional Hopkinson Bar Tests to Measure Stress-Strain Properties Relevant to Machining and High Speed Forming," North America Metalwork Res. Conf., 3rd Proc., Pittsburgh, PA, May 5-7, pp. 291-304.
110. Shirakashi, T. and Maekawa, K. and Usui, E., 1983, "Flow Stress of Low Carbon Steel at High Temperature and Strain Rate," Bull. Japan Soc. Prec. Eng., 17/3, pp.161-172.
111. Yoshino, M. and Shirakashi, T., 1997, "Flow-Stress Equation including Effects of Strain Rate and Temperature History," Int. J. Mech. Sci., 39/12, pp.1345-1362. (Pubitemid 127403215)
112. Stevenson, R. and Stephenson, D. A., 1995, "The Mechanical Behavior of Zinc During Metal Cutting," J. Eng. Mat. Tech., 117, pp. 172-178.
113. Stevenson, R., 1997, "Study on the Correlation of Workpiece Mechanical Properties from Compression and Cutting Tests," J. Mach. Sci. Tech., 1(1), pp. 67-79. (Pubitemid 127550533)
114. Y.B. Guo, 2003, "An Integral Method to Determine the Mechanical Behavior of Materials in Metal Cutting", J. Mater. Proc. Tech., 142 (1), pp. 72-81.
115. Y.B. Guo, C.R. Liu, 2002, "Mechanical Properties of Hardened AISI 52100 Steel in Hard Machining," ASME J. Manuf. Sci. Eng., 124, pp. 1-9.
116. Johnson, G.R., Cook, W.H., 1985, "Fracture Characteristics of Three Metals Subjected to Various Strains, Strain Rates, Temperatures and Pressures," Eng. Frac. Mech., 21/1, pp. 31-48.
117. Shirakashi, T., Maekawa, K., Usui, E., 1983, "Flow Stress of Low Carbon Steel at High Temperature and Strain Rate, Part 1: Property of Incremental Strain Method in Impact Compression Test with Rapid Heating and Cooling Systems," Bull. Japan Soc. Prec. Eng., 17, pp. 161-166.
118. Maekawa, K., Shirakashi, T., Usui, E. 1983, "Flow Stress of Low Carbon Steel at High Temperature and Strain Rate, Part 2: Flow Stress under Variable Temperature and Variable Strain Rate," Bull. Japan Soc. Prec. Eng., 17, pp. 167-172.
119. Follansbee, P.S., Kocks, U.F., 1988, "A Constitutive Description of the Deformation of Copper Based on the Use of the Mechanical Threshold Stress as an Internal State Variable," Acta Metall., 36, pp. 81-93.
120. Zerilli, F.J., Armstrong, R.W., 1987, "Dislocation-mechanics-based Constitutive Relations for Material Dynamics Calculations," J. App. Phy., 61, pp. 1816-1825.
121. Benson, D.J. 1997, "A Mixture Theory for Contact in Multi-material Eulerian Formulations," Comput. Methods Appl. Mech. Engr., 140, pp. 59-86.
122. Movahhedy, M.R., Altintas, Y., Gadala, M.S., 2002, "Numerical Analysis of Metal Cutting with Chamfered and Blunt Tools," J. Manuf. Sci. Eng., 124, pp. 178-188.
123. Guo, Y.B., Yen, D.W., 2003, "A FEM Study on Mechanisms of Discontinuous Chip Formation in Hard Machining," J. of Materials Proc. Tech., 155, pp. 1350-1356.
124. Guo, Y.B., Wen, Q., 2005, "A Hybrid Approach to Investigate Chip Morphology Transition from Saw-tooth to Discontinuous Chips with the Effects of Cutting Edge Geometry," Trans. of NAMRI/SME, XXXIII, pp. 469-476. (Pubitemid 43252490)
125. Behrens, A., Kalisch, K., Wulfsberg, J.P., 2004, "Possibilities and Problems of Finite Element Simulation of High Speed Cutting Mechanics," ASME/IMECE, MED, Anaheim, CA.
126. Guo, Y.B., Wen, Q., Horstemeyer, M.F., 2005, "An Internal State Variable Plasticity Based Approach to Determine Dynamic Loading History Effects on Material Property in Manufacturing Processes," Int. J. Mech. Sci., 47, pp. 1423-1441.
127. Bammann, D.J., 1990, "Modeling Temperature and Strain Rate Dependent Large Deformation of Metals," Appl. Mech. Rev., 43, pp. 312-319.
128. Bammann, D.J., Chiesa, M.L., and Johnson, G.C., 1996, "Modeling Large Deformation and Failure in Manufacturing Process," in: Tatsumi, Wanabe, Kambe, Theor. App. Mech., pp. 359-376.
129. Chuzhoy, L., DeVor, R.E., Kapoor, S.G., Beaudoin, A.J., Bammann, D.J., 2003, "Machining Simulation of Ductile Iron and its Constituents, Part 2: Numerical Simulation and Experimental validation of Machining," ASME J. Manuf. Sci. Eng., 125, pp. 192-201.
130. Y.B. Guo, S. Anurag, 2008, "Finite Element Modeling and Simulation of Micromachining Random Multiphase Materials," Trans. NAMRI/SME, 36, pp. 373-380.
131. Guo, Y. B., 2000, Finite Element Analysis of Superfinish Hard Turning, Ph.D. Dissertation, May, Purdue University.
132. Guo, Y.B., Liu, C.R., 2002, "3D FEA Modeling of Hard Turning," ASME J. Manuf. Sci. Eng., 124, pp. 189-199.
133. Yang, Xiaoping, C.R. Liu, 2002, "A New Stress-Based Model of Friction Behavior in Machining and Its Significant Impact on Residual Stresses Computed by Finite Element Method," Int. J. Mech. Sci., 44/4, pp. 703-723.
134. Özel, T. 2006. The influence of friction models on finite element simulations of machining, Int. J. Mach. Tools & Manuf., 46, 518-530.
135. Zemzemi, F., Rech, J., Ben Salem, W., Dogui, A., Kapsa, Ph. 2008b. Identification of a friction model at tool/chip/workpiece interfaces in dry machining of AISI4142 treated steels, Jour. Mat. Proc. Tech., (In press).
136. Barash, M. M., Schoech, W. J., 1972, "A Semi-Analytical Model of the Residual Stress Zone in Orthogonal Machining," Proc. 11th Int. MTDR Conf., Pergamon Press, London.
137. Devarajan, N., Asundi, M. K., Somasundaram, S., 1984, "Experimental Method for Predicting Residual Stresses due to Turning in Stainless Steel," Experimental Techniques, August, pp. 22-26.
138. Wu, D. W., Matsumoto, Y., 1990, "The Effect of Hardness on Residual Stresses in Orthogonal Machining of AISI 4340 Steel," Trans. ASME, J. Eng. Ind., 112/3, pp.245-252.
139. Liu, C. R. and Lin, Z.C., 1985, "Effects of Shear Plane Boundary Condition on Stress Loading in Machining," Int. J. of Mech. Sci., 27/5.
140. Lin, Z. C., Lin, Y. Y., Liu, C. R., 1991, "Effects of Thermal Load and Mechanical Load on the Residual Stress of a Machined Workpiece," Int. J. Mech. Sci. 33/4, pp.263-278.
141. Lin, Z. C. and C. R. Liu, 1993, "The Influence of the Degree of Constraint on the Residual Stress of the Machined Workpiece," Computer Methods in Applied Mechanics and Engineering, Vol. 108, pp.37-52.
142. Strenkowski, J. S., Carroll, J. T., 1985, "A Finite Element Model of Orthogonal Metal Cutting," Trans. ASME, J. Eng. Ind., 107, pp.349-354.
143. Hsu, H. C., 1992, "An Elasto-Viscoplastic Finite Element Model of Orthogonal Metal Cutting for Residual Stress Prediction," Ph.D. Dissertation, N.C. State University.
144. Shih, A. J., 1995, "Finite Element Simulation of Orthogonal metal Cutting," Trans. ASME, J. Eng. Ind., 117, pp.84-93.
145. Obikawa, T., Sasahara, H., Shirakashi, T., Usui, E., 1997, "Application of Computational Machining Method to Discontinuous Chip Formation," ASME J. Manuf. Sci. Eng., 119, pp.667-674.
146. Sasahara, H., Obikawa, T., Shirakashi,T., 1997, "Finite Element Modeling of Residual Stress Control on Machined Surface," Trans. NAMRI/SME, XXV, pp.231-1218
147. Liu C.R., Y.B. Guo, 2000, "Finite Element Analysis of the Effect of Sequential Cuts and Tool-Chip Friction on Residual Stresses in a Machined Layer," Int. J. Mech. Sci., 42(6), pp. 1069-1086.
148. Y.B. Guo, C.R. Liu, 2002, "FEM Analysis of Residual Stress Distribution and Formation Mechanisms in Machining," Int. J. Mach. Sci. Tech., 6(1), pp. 21-41.
149. Valiorgue, F., Rech, J., Hamdia, H., Gilles, P., Bergheau, J.M., 2007, A New Approach for the Modelling of Residual Stresses Induced by Turning of 316L, J. Mater. Proc. Tech., 191:270-273. (Pubitemid 46881116)
150. Cheong, W.C.D., and Zhang, L.C., 2000, "Effect of repeated nano-indentations on the deformation in monocrystalline silicon," Journal of Materials Science Letters, 19, pp. 439-442.
151. Lin, Z.-C. and Huang, J.-C., 2008, "The influence of different cutting speeds on the cutting force and strain-stress behaviors of single crystal copper during nano-scale orthogonal cutting," Journal of Materials Processing Technology, 201, pp. 477-482.
152. Ee, K.C., Dillon Jr, O.W., Jawahir, I.S., 2005, Finite Element Modeling of Residual Stresses in Machining Induced by Cutting Tool with a Finite Edge Radius, Int. J. Mech. Sci., 47:1611-1628.
153. J.C. Outeiro, A.M. Dias, I.S. Jawahir, 2006, "On the Effects of Residual Stresses Induced by Coated and Uncoated Cutting Tools with Finite Edge Radii in Turning Operations," Ann CIRP, 55/1, pp. 111-116.
154. Y.C.Yen, Anurag Jain, Taylan Altan, 2004, "A finite element analysis of orthogonal machining using different tool edge geometries," J. Mater. Proc. Tech., 146, pp. 72-81.
155. Nasr, M.N.A., E.G. Ng, and M.A. Elbestawi, 2007, "Modeling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316L," Int. J. Machine Tools & Manufacture, 47, pp. 401-411.
156. Yang, X. and Liu, C. R., 2002, "A Methodology for Predicting the Variance of Fatigue Life Incorporating the Effect of Manufacturing Processes," ASME Journal of Manufacturing Science and Engineering, 124(3), pp. 745-753.
157. A.W. Warren, Y.B. Guo, 2008, "Characteristics of Residual Stress Profiles in Hard Turned versus Ground Surfaces with and without a White Layer," Proc. of ASME Int. Conference on Manufacturing Science & Engineering, Chicago, IL.
158. D. Dornfeld, S. Min, and Y. Takeuchi, 2006, "Recent advances in mechanical micromachining", Ann. CIRP, 55/2, 1-24
159. Parasiz, S., Kinsey, B., Krishnan, N., Cao, J. and Li, M. (2007) "Investigation of Deformation Size Effects during Microextrusion", ASME Journal Manufacturing Science and Engineering, Vol. 129, Issue 4, pp. 690-697
160. S. Geiger, U. Engel, M. Geiger, FE-simulation of microforming processes applying a mesoscopic model, Int. J. Mach. Tools Manuf., 46, 1222-1226, 2006.
161. M. Geiger, S. Gei, U. Engel, Mesoscopic model: advanced simulation of microforming processes, Production Engineering, 1(1), 79-84, 2007.
162. J. F. Michel, P. Picart, Modelling the constitutive behaviour of thin metal sheet using strain gradient theory, J. Mater. Process. Technol., 125-126, 164-169, 2002
163. G.Y. Kim, J. Ni, M. Koc, Modeling of the size effects on the behavior of metals in microscale deformation processes, ASME J. Manuf. Sci. Eng., 129, 470-476, 2007
164. F. Vollertsen, Z. Hu*, H. Schulze Niehoff, C. Theiler, "State of the art in micro forming and investigations into micro deep drawing", JMPT. 151 (2004) 70-79
165. L. Peng, F. Liu, J. Ni, X. Lai, Size effects in thin sheet metal forming and its elastic-plastic constitutive model, Mat. Design, 28, 1731-1736, 2007
166. H. Justinger, G. Hirt, Estimation of grain size and grain orientation influence in microforming processes by Taylor factor considerations. J. Mater. Process. Technol., corrected Proof., 2008
167. X. Lai, L. Peng, P. Hu, S. Lan, J. Ni, Material behavior modelling in micro/meso-scale forming process with considering size/scale effects, Computational Materials Science, 43, 1003-1009, 2008
168. U. Engel, Tribology in microforming, Wear, 260, 265-273, 2006
169. A. Messner, U. Engel, R. Kals, F. Vollertsen, Size effect in the FE-simulation of micro-forming processes, Journal of Materials Processing Technology, 45, 371-376, 1994.
170. F. Vollertsen, Z. Hu, Tribological size effects in sheet metal forming measured by a strip drawing test, Annals of CIRP, 55/1:291-294, 2006.
171. Krishnan, N., Cao, J. and Dohda K. (2007) "Study of the Size Effect on Friction Conditions in Micro-extrusion: Part 1 - Micro-Extrusion Experiments and Analysis", ASME Journal of Manufacturing Science and Engineering, Vol. 129, Issue 4, pp. 669-676
172. Mori, L, Krishnan, N., Cao, J. and Espinosa, H (2007) "Study of the Size Effects and Friction Conditions in Micro-extrusion: Part II - Size Effect in Dynamic Friction for Brass-steel Pairs", ASME Journal of Manufacturing Science and Engineering, Vol. 129, Issue 4, pp. 677-689
173. P. Becker, H. J. Jeon, C. C. Chang, A. N. Bramley, A geometric approach to modeling friction in metal forming, Annals CIRP 52(1): 209-212, 2003.
174. J. Jeon, A.N. Bramley, A friction model for microforming, Int J Adv Manuf Technol, 33, 125-129, 2007.
175. L.G. Wang, X. P. Sun, Y. Huang, Friction analysis of microcosmic elastic-plastic contact for extrusion forming, Journal of Materials Processing Technology, 187-188, 631-634, 2007
176. J. Cao, N. Krishnan, Z. Wang, H. Lu, W.K. Liu, A. Swanson, Microforming: Experimental investigation of the extrusion process for micropins and its numerical simulation using RKEM, Trans. of the ASME, J. Manuf. Sci. Eng.,126, 642-652, 2004.
177. W. Pan, Y. Qin, FE analysis of multi-cycle micro-forming through using closed-die upsetting models and forward extrusion models, Journal of Materials Processing Technology, 201, 220-225, 2008.
178. Y. Guo, Z. Zhuang, X.Y. Li, Z. Chen, An investigation of the combined size and rate effects on the mechanical responses of FCC metals, International Journal of Solids and Structures, 44, 1180-1195, 2007.
179. S. Groh, E.B. Marin, M.F. Horstemeyer, H.M. Zbib, Multiscale modeling of the plasticity in an aluminum single crystal, International Journal of Plasticity, doi:10.1016/j.ijplas.2008.11.003, 2008.
180. K.W. Neale, Use of crystal plasticity in metal forming simulations, Int. J. Mech. Sci., 35(12), 1053-1063, 1993.
181. Y. Zhou, J.J. Jonas, L. Szabo, A. Makinde, M. Jain, S.R. MacEwen, Incorporation of an isotropic (texture-based) strain-rate potential into three-dimensional finite element simulations, International Journal of Plasticity, 13(1), 165-181, 1997.
182. A. Kumar, C. Yang, Study of work hardening models for single crystals using three dimensional finite element analysis, International Journal of Plasticity, 15, 737-754, 1999.
183. S. Nemat-Nasser, L. Ni, T. Okinaka, A constitutive model for fee crystals with application to polycrystalline OFHC copper, Mechanics of Materials, 30, 325-341, 1998.
184. R.D. McGinty, D.L. McDowell, Multiscale Polycrystal Plasticity, Journal of Engineering Materials and Technology, 121, 203-209, 1999
185. T. Makino, K. Dohda, A. Ishitani, H. Zhang, Anisotropy of plastic deformation in micro/meso-scale metal forming - development of testing method, Transactions of NAMRI/SME, 37, 330-340, 2009.