Multiscale polycrystal plasticity

Journal of Engineering Materials and Technology, Transactions of the ASME

Volumn 121, Issue 2, 1999, Pages 203-209

  McGinty, Robert D ^a   McDowell, David L ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

HARDENING SURFACE MODEL;

ANISOTROPY; CRYSTAL ORIENTATION; DEFORMATION; DISLOCATIONS (CRYSTALS); HARDENING; MATHEMATICAL MODELS; PLASTICITY; SHEAR FLOW; STRAIN; STRENGTHENING (METAL); STRESS ANALYSIS;

POLYCRYSTALS;

EID: 0033116713     PISSN: 00944289     EISSN: 15288889     Source Type: Journal    
DOI: 10.1115/1.2812367     Document Type: Article

References (38)

1. Anand, L., and Kothari, M., 1996, “A Computational Procedure for Rate-Independent Crystal Plasticity,” J. Mech. Phys. Solids, Vol. 44, No. 4, pp. 525-558.
2. Armstrong, P.J., and Frederick, C.O., 1966, “A Mathematical Representation of the Multiaxial Bauschinger Effect,” G.E.G.B. Report RD/B/N, p. 731.
3. Asaro, R.J., and Rice, R., 1977, “Strain Localization in Ductile Single Crystals,” J. Mech. Phys. Solids, Vol. 25, p. 309.
4. Asaro, R.J., 1983, “Micromechanics of Crystals and Polycrystals,” Advances in Applied Mechanics, Vol. 23, Academic Press, San Diego.
5. Asaro, R.J., and Needleman, A., 1985, “Texture Development and Strain Hardening in Rate Dependent Polycrystals,” Acta Metall., Vol. 33, No. 6, pp. 923-953.
6. Bassani, J.L., and Wu, T.Y., 1991, “Latent Hardening in Single Crystals II. Analytical Characterization and Predictions,” Proc. R. Soc., London, Vol. A435, p. 21.
7. Bay, B., Hansen, N., Hughes, D.A., and Kuhlmann-Wilsdorf, D., 1992, “Evolution of FCC Deformation Structures in Polyslip,” Acta Met. Mater., Vol. 40, No. 2, pp. 205-219.
8. Bronkhorst, C.A., Kalidindi, S.R., and Anand, L., 1992, “Polycrystalline Plasticity and the Evolution of Crystallographic Texture in FCC Metals,” Phil. Trans. R. Soc., London, Series A, Vol. 341, pp. 443-477.
9. Butler, G.C., Graham, S., McDowell, D.L., Stock, S.R., and Ferney, V.C., 1998, “Application of the Taylor Polycrystal Plasticity Model to Complex Deformation Experiments,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 120, No. 3, pp. 197-205.
10. Butler, G.C., and McDowell, D.L., 1998, “Polycrystal Constraint and Grain Subdivision,” Int. J. Plasticity, Vol. 14, No. 8, pp. 703-717.
11. Chang, Y.W., and Asaro, R.J., 1981, “An Experimental Study of Shear Localization in Aluminum-Copper Single Crystals,” Acta Metall, Vol. 29, pp. 241-257.
12. Cuitino, A.M., and Ortiz, M., 1992, “Computational Modeling of Single Crystals,” Modelling Simul Mater. Sci. Eng., Vol. 1, pp. 225-263.
13. Dawson, P.R., Beaudoin, A.J., and Mathur, K.K., 1994, “Finite Element Modeling of Polycrystalline Solids,” Numerical Predictions of Deformation Processes and the Behavior of Real Materials, Proc. 15th Riso Symposium On Materials Science, Anderson, S.I., Bilde-Sorensen, J.B., Lorentzen, T., Pedersen, O.B., and Sorenson, N.J., eds., Riso National Lab, Roskilde, Denmark, pp. 33-44.
14. Graham, S., 1995, “The Stress State Dependence of Finite Inelastic Deformation Behavior of FCC Polycrystalline Materials,” Master’s thesis, Georgia Institute of Technology.
15. Hansen, N., and Juul Jensen, D.J., 1992, “Flow Stress Anisotropy Caused by Geometrically Necessary Boundaries,” Acta Met., Vol. 40, No. 12, pp. 3265-3275.
16. Havner, K.S., 1992, Finite Plastic Deformation of Crystalline Solids, Cambridge University Press, New York, NY.
17. Hill, R., 1965, “A Self-Consistent Mechanics of Composite Materials,” J. Mech. Phys. Solids, Vol. 13, pp. 213.
18. Hughes, D.A., and Hansen, N., 1991, “Microstructural Evolution in Nickel During Rolling and Torsion,” Mater. Sci. Tech., Vol. 7, No. 6, pp. 544-553.
19. Hughes, D.A., 1996, “The Development of High Angle Deformation Boundaries and Local Orientations in Aluminum,” Aluminum Alloys for Packaging II, J.G. Morris, S.K. Das and H.S. Goodrich, eds., The Minerals, Metals and Materials Society, pp. 129-144.
20. Hughes, D.A., Liu, Q., Chrzan, D.C., and Hansen, N., 1997, “Scaling of Microstructural Parameters and Misorientations of Deformation Induced Boundaries,” Acta. Mater., Vol. 45, No. 1, pp. 105-112.
21. Hutchinson, J.W., 1976, “Bounds and Self-Consistent Estimates for Creep of Polycrystalline Materials,” Proc. R. Soc., London, Vol. A348, pp. 101-127.
22. Jonas, J.J., Canova, G.R., Shrivistava, S.C., and Christodoulou, N., 1981, “Sources of the Discrepancy Between the Flow Curves Determined in Torsion and in Axisymmetric Tension and Compression Testing,” Proceedings of The Workshop on Plasticity of Metals at Finite Strain: Theory, Experiment and Computation. Division of Applied Mechanics, Stanford University, Stanford, CA, pp. 206-222.
23. Kalidindi, S.R., Bronkhorst, C.A., and Anand, L., 1992, “Crystallographic Texture Evolution in Bulk Deformation Processing of FCC Metals,”. J. Mech. Phys. Solids, Vol. 40, No. 3, pp. 537-569.
24. Kocks, U.F., Stout, M.G., and Rollett, A.D., 1988, “The Influence of Texture on Strain Hardening,” Strength of Metals and Alloys, Vol. 1, pp. 25-34.
25. Kocks, U.F., Kallend, J.S., Wank, H.R., Rollet, A.D., and Wright, S.I., 1994, popLA, Preferred Orientation Package-Los Alamos, LANL LA-CC-89-18.
26. Kroner, E., 1958, “Kontinuumstheorie der Versetzungen und Eigenspan-nungen,” Springer-Verlag, Berlin.
27. Miller, M., and Dawson, P., 1997, “Influence of Slip System Hardening Assumptions on Modeling Stress Dependence of Work Hardening,” J. Mech. Phys. Solids, Vol. 45, No. 11/12, pp. 1781-1804.
28. Molinari, A., Canova, G., and Ahzi, S., 1987, “A Self-Consistent Approach of the Large Deformation Polycrystal Plasticity,” Acta Met., Vol. 35, p. 2983.
29. Nemat-Nasser, S., Mehrabadi, M.M., and Iwakuma, T., 1981, “On Certain Macroscopic and Microscopic Aspects of Plastic Flow of Ductile Materials,1” Three-Dimensional Constitutive Relations and Ductile Fracture, S. Nemat-Nasser, ed., North-Holland Publ., pp. 147-172.
30. Nemat-Nasser, S., and Obata, M., 1986, “Rate Dependent, Finite Elasto-Plastic Deformation of Polycrystals,” Proc. R. Soc., London, Vol. A407, p. 45.
31. Peirce, D., Asaro, R.J., and Needleman, A., 1983, “An Analysis of Non-uniform and Localized Deformation in Ductile Single Crystals,” Acta Metall, Vol. 31, p. 1951.
32. Rashid, M.M., and Nemat-Nasser, S., 1990, “A Constitutive Algorithm for Rate Dependent Crystal Plasticity,” Computer Methods in Applied Mechanics and Engineering, Vol. 94, pp. 201-228.
33. Rollet, A.D., Juul Jensen, D., and Stout, M.G., 1992, “Modelling the Effect of Microstructure on Yield Anisotropy,” Proc. 13th RisO Int. Symp. On Materials Science, S.I. Andersen et al., eds., RisO National Laboratory, Roskilde, Denmark, pp. 93-109.
34. Schroder, J., and Miehe, C., 1997, “Aspects of Computational Rate-Independent Crystal Plasticity,” Computational Materials Science. Vol. 9, pp. 168-176.
35. Stout, M.G., Kallend, J.S., Kocks, U.F., Przystupa, M.A., and Rollett, A.D., 1988, “Material Dependence of Deformation Texture Development in Various Deformation Modes,” Proc. 13th Int. Conf. On Textures of Materials (ICOTOM 8), J.S. Kallend and G. Gottstein, eds., the Metallurgical Society.
36. Taylor, G.I., and Elam, C.F., 1925, “The Plastic Extension and Fracture of Aluminum Crystals,” Proc. Royal Soc., London, Vol. A108, p. 28.
37. Taylor, G.I., 1938, “Plastic Strain in Metals,” J. Inst. Metals, Vol. 62, p. 307.
38. Teodosiu, C., 1991, Anisotropy and Localization of Plastic Deformation, J.P. Boehler and A.S. Khan, eds., pp. 179-182.