On predicting softening effects in hard turned surfaces - Part II: Finite element modeling and verification

Journal of Manufacturing Science and Engineering

Volumn 127, Issue 3, 2005, Pages 484-491

  Shi, Jing ^a   Liu, C Richard ^b  

^a North Dakota State University   (United States)

^b SCHOOL OF INDUSTRIAL ENGINEERING   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ACTIVATION ENERGY; FINISHING; FINITE ELEMENT METHOD; HARDNESS; MICROSTRUCTURE; STEEL; THERMAL STRESS;

CUTTING SPEED; MATERIAL SOFTENING; THERMAL ACTIVATION ENERGY; THERMAL HISTORY;

TURNING;

EID: 24644497090     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1948402     Document Type: Article

References (45)

1. Hibbit, Karlson, and Sorenson, Inc., 2002, ABAQUS/Explicit User's Manual, V6.3, Providence, RI.
2. Taylor, F. W., 1907, "On the Art of Cutting Metals," Trans. ASME, 28, p. 31.
3. Hahn, R. S., 1951, in Proceedings of the U.S. National Congress of Applied Mechanics, ASME, p. 661.
4. Trigger, K. J., and Chao, B. T., 1951, "An Analytical Evaluation of Metal Cutting Temperatures," Trans. ASME, 73, pp. 57-68.
5. Moufki, A., Molinari, A., and Dudzinski, D., 1998, "Modeling of Orthogonal Cutting with a Temperature Dependent Friction Law," J. Mech. Phys. Solids, 46(10), pp. 2103-2138.
6. Boothroyd, G., 1966, Fundamentals of Metal Cutting and Machine Tools, Hemiphere, Washington, DC.
7. Lipman, M. P., Nevis, B. E., and Kane, G. E., 1967, "A Remote Sensor Method for Determining Average Tool-Chip Interface Temperatures in Metal Cutting," ASME J. Eng. Ind., 89, p. 333.
8. Nakayama, K., 1956, "Temperature Rise of Workpiece During Metal Cutting," Bull. Fac. Eng. Yokohama Nat. Univ., 5, p. 1.
9. Konig, W., Berktold, A., and Koch, K. F., 1993, "Turning Versus Grinding - A Comparison of Surface Integrity Aspects and Attainable Accuracies," CIRP Ann., 42(1), pp. 39-43.
10. Wang, J. Y., and Liu, C. R., 1999, "The Effect of Tool Flank Wear on the Heat Transfer Thermal Damage and Cutting Mechanics in Finish Hard Turning," CIRP Ann., 48(1), pp. 53-58.
11. Loewen, E. G., and Shaw, M. C., 1954, "On the Analysis of Cutting Tool Temperatures," Trans. ASME, 76, pp. 217-236.
12. Hou, Z. B, and Komanduri, R., 1997, "Modeling of Thermomechanical Shear Instability in Machining," Int. J. Mech. Sci., 39(11), pp. 1273-1314.
13. Chou, Y. K., and Evans, C. J., 1999, "White Layers and Thermal Modeling of Hard Turned Surfaces," Int. J. Mach. Tools Manuf., 39(12), pp. 1863-1881.
14. Rapier, A. C., 1954, Br. J. Appl. Phys., 5, pp. 400-405.
15. Dutt, R. P., and Brewer, R. C., 1964, "On the Theoretical Determination of the Temperature Field in Orthogonal Cutting," Int. J. Prod. Res., 4(2), pp. 91.
16. Usui, E., and Shirakashi, T., 1975, "Experimental Measurement of Temperature Distribution in Tool/Chip Interface," Bull. Jpn. Soc. Precis. Eng., 9(3), pp. 83-84.
17. Smith, A. J. R., and Armarego, E. J. A, 1981, "Temperature Prediction in Orthogonal Cutting with a Finite Difference Approach," CIRP Ann., 30(1), pp. 9-13.
18. Lin, Z. C., and Pan, W. C., 1993, "A Thermoelastic-Plastic Large Deformation Model for Orthogonal Cutting with Tool Flank Wear-Part I: Computational Procedures," Int. J. Mech. Sci., 35(10), pp. 829-840.
19. Lin, Z. C., and Pan, W. C., 1993, "A Thermoelastic-Plastic Large Deformation Model for Orthogonal Cutting with Tool Flank Wear-Part II: Machining Application," Int. J. Mech. Sci., 35(10), pp. 841-850.
20. Lei, L., Shin, Y. C., and Incropera, F. P., 1999, "Thermo-Mechanical Modeling of Orthogonal Machining Process by Finite Element Analysis," Int. J. Mach. Tools Manuf., 39, pp. 731-750.
21. Maekawa, K., and Ohhata, H., 1997, "Simulation Analysis of Three-Dimensional Continuous Chip Formation Processes (Part 3)," Int. J. Jpn. Soc. Precis. Eng., 31(2), pp. 103-108.
22. Shi, J., and Liu, C. R., 2003, "The Influence of Material Models on Finite Element Simulation of Machining," Journal of Manufacturing Science and Engineering (in press).
23. Ng, E.-G., and Aspinwell, D. K., 1999, "Modeling of Temperature and Forces When Orthogonally Machining Hardened Steel," Int. J. Mach. Tools Manuf., 39, pp. 885-903.
24. Guo, Y. B., and Liu, C. R., 2002, "3-D FEA Modeling of Superfinish Hard Turning," J. Manuf. Sci. Eng., 124(2), pp. 189-199.
25. Ueda, T., et al., 1999, "Temperature Measurement of CBN Tool in Turning of High Hardness Steel," CIRP Ann., 48(1), pp. 63-66.
26. Shi, J., and Liu, C. R., 2003, "Prediction of Chip Morphology and White Layer in Hard Machining by Finite Element Analysis," International Journal of Advanced Manufacturing Technology (in press).
27. Maekawa, K., Ohshima, I., Kubo, K., and Kitagawa, T., 1994, "The Effect of Cutting Speed and Feed on Chip Flow and Tool Wear in the Machining of a Titanium Alloy," in Proceedings of the International Conference on Behavior of Materials in Machining, Warwick, pp. 152-167.
28. Ozel, T., and Altan, T., 2000, "Process Simulation Using Finite Element Method-Prediction of Cutting Forces, Tool Stresses and Temperatures in High Speed Flat End Milling," Int. J. Mach. Tools Manuf., 40(5), pp. 713-738.
29. Shatla, M., Kerk, C., and Altan, T., 2001, "Process Modeling in Machining. I Determination of Flow Slress Dala," Int. J. Mach. Tools Manuf., 41(10), pp. 1511-1534.
30. Shatla, M., Kerk, C., and Altan, T., 2001, "Process Modeling in Machining. II. Validation and Applications of the Determined Flow Stress Data," Int. J. Mach. Tools Manuf., 41(11), pp. 1659-1680.
31. Stevenson, M. G, and Oxley, P. L. B., 1970, "Experimental Investigation on the Influence of Speed and Scale on the Strain-Rate in a Zone of Intense Plastic Deformation," Proc. Inst. Mech. Eng., 184, pp. 561-576.
32. Stevenson, M. G, and Oxley, P. L. B., 1971, "An Experimental Investigation of the Influence of Strain Rate and Temperature on the Flow Stress Properties of a Low C Steel Using a Machining Test," Proc. Inst. Mech. Eng., 185, pp. 741-754.
33. Oxley, P. L. B., 1989, Mechanics of Machining, Ellis Horwood, Chicester.
34. Zener, C., and Hollomon, J. H., 1944, "Effect of Strain Rate on Plastic Flow of Steel," J. Appl. Phys., 14, pp. 22-32.
35. MacGregor, C. W, and Fisher, J. C., 1945, "Tension Tests at Constant True Strain Rates," J. Appl. Mech., 12, pp. 217-227.
36. Guo, Y. B., and Liu, C. R., 2002, "Mechanical Properties of Hardened AISI52100 Steel in Hard Machining Processes," J. Manuf. Sci. Eng., 124(1), pp. 1-9.
37. Strenkowski, J. S, and Carroll, J. T., 1985, "A Finite Element Model of Orthogonal Metal Cutting," ASME J. Eng. Ind., 107, pp. 349-354.
38. Nakayama, K., 1958, "Studies on the Mechanism of Metal Cutting," Bull. Fac. Eng. Yokohama Nat. Univ., 7, p. 1.
39. Chandrasekar, H., and Kapoor, D. V., 1965, "Photoelastic Analysis of Tool-Chip Interface Stresses," ASME J. Eng. Ind., 87 pp. 495-502.
40. Kato, S., Yamaguchi, K., and Yamada, M., 1972, "Stress Distribution at the Interface Between Tool and Chip in Machining," ASME J. Eng. Ind., 94, pp. 683-689.
41. Zhang, B., and Bagchi, A., 1994, "Finite Element Simulation of Chip Formation and Comparison with Machining Experiment," ASME J. Eng. Ind., 116, pp. 289-297.
42. Nakayama, K., Arai, M., and Kanda, T., 1988, "Machining Characteristics of Hard Materials," CIRP Ann., 37(1), pp. 89-92.
43. Wang, J. Y., 1998, "A New Methodology for Analyzing the Heat Transfer and Thermal Damage Considering Tool Flank Wear in Finish Hard Machining," Ph.D. dissertation, Purdue University.
44. Tonshoff, H. K., Wobker, H. G., and Brandt, D., 1995, "Hard Turning -Influences on the Workpiece Properties," Transactions of NAMRI/SME, XXIII, pp. 215-220.
45. Agha, S., and Liu, C. R., 2000, "On Modeling the Fatigue Performance Based on Residual Stresses Generated by Superfinish Hard Turning," MED Manufacturing Science and Engineering, ASME, New York.