An integral method to determine the mechanical behavior of materials in metal cutting

Journal of Materials Processing Technology

Volumn 142, Issue 1, 2003, Pages 72-81

  Guo, Y B ^a  

^a University of Alabama   (United States)

Author keywords

Material properties; Materials tests; Metal cutting

Indexed keywords

MATERIALS TESTING; STRAIN; STRESSES;

CUTTING SPEED;

METAL CUTTING;

EID: 0141532030     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0924-0136(03)00462-X     Document Type: Article

References (32)

1. Merchant M.E. Mechanics of the metal cutting process. J. Appl. Phys. 16:1945;267-275.
2. Usui E. Progress of predictive theories in metal cutting. JSME Int. J. Ser. III. 31(2):1988;363-369.
3. Kobayashi S., Thomsen E.G. Metal cutting analysis. I. Re-evaluation and new method of presentation of theories. ASME J. Eng. Ind. 90:1962;63-70.
4. The J.H.L., Scrutton R.F. The stress-state in the shear zone during steady state machining. ASME J. Eng. Ind. 101:1979;211-216.
5. N.N. Zorev, Metal Cutting Mechanics, Pergamon Press, Oxford, 1966.
6. von Turkovich B.F. Shear stress in metal cutting. ASME J. Eng. Ind. 92:1970;151-157.
7. Spaans C. Treatise of the streamlines and the stress, strain, and strain rate distributions, and on stability in the primary shear zone in metal cutting. ASME J. Eng. Ind. 94:1972;690-696.
8. M.C. Shaw, Metal Cutting Principles, Oxford University Press, New York, 1984.
9. Kececioglu D. Shear zone size, compressive stress, and shear strain in metal cutting and their effects on mean shear flow stress. ASME J. Eng. Ind. 81:1960;79-86.
10. P.L.B. Oxley, The Mechanics of Machining, Ellis Horwood, Chichester, UK, 1989.
11. Ocusima K., Hitomi K. An analysis of the mechanism of orthogonal cutting and its application to discontinuous chip formation. ASME J. Eng. Ind. 82:1961;545-556.
12. Stevenson R., Stephenson D.A. The mechanical behavior of zinc during machining. ASME J. Eng. Ind. 117:1995;173-178.
13. Stevenson R. Study on the correlation of workpiece mechanical properties from compression and cutting tests. J. Mach. Sci. Technol. 1(1):1997;67-79.
14. Lei S., Shin Y.C., Incropera F.P. Material constitutive modeling under high strain rates and temperatures through orthogonal machining tests. J. Manuf. Sci. Eng. 121:1999;577-585.
15. Shatla M., Kerk C., Altan T. Process modeling in machining. Part I. Determination of flow stress data. Int. J. Mach. Tools Manuf. 41:2001;1511-1534.
16. Johnson G.R., Hoegfeldt J.M., Lindholm U.S., Nagy A. Response of various metals to large torsional strains over a large range of strain rates. Part 1. Ductile metals. J. Eng. Mater. Technol. 105:1983;42-47.
17. Zheng Y., Sutherland J.W. An orthogonal cutting model based on finite deformation analysis. Part II. Constitutive equations and experimental verification. ASME MED. 10:1999;301-309.
18. S.P.F.C. Jaspers, J.H. Dautzenberg, W.P. Vellinga, Mechanical behavior of industrial alloys at high strain rate and temperature using the split Hopkinson pressure bar, in: P.H. Osanna, D. Prostrednik, N.M. Durakbasa (Eds.), Proceedings of the Sixth ISMQC IMEKO Symposium on Metrology for Quality Control in Production, Wien, 1998, pp. 291-296.
19. G. Poulachon, A.L. Moisan, I.S. Jawahir, Evaluation of chip morphology in hard turning using constitutive models and material property data, in: Proceedings of the ASME-IMECE, vol. 12, MED, New York, 2002, pp. 179-185.
20. Guo Y.B., Liu C.R. Mechanical properties of hardened AISI 52100 steel in hard machining processes. J. Manuf. Sci. Eng. 124:1999;1-9.
21. S.A. Batzer, G. Subhash, W. Olson, J.W. Sutherland, Large strain constitutive model development for application to orthogonal machining, in: Proceedings of the Fifth CIRP International Workshop on Modeling of Machining Operations, W. Lafayette, IN, May 20-21, 2002, pp. 31-40.
22. Stevenson M.G., Oxley P.L.B. An experimental investigation of the influence of strain rate and temperature on the flow stress properties of a low carbon steel using a machining test. Proc. Inst. Mech. Eng. 185:1970;741-754.
23. G.R. Johnson, W.H. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, in: Proceedings of the Seventh International Symposium on Ballistics, The Hague, The Netherlands, April 19-21, 1983, pp. 541-547.
24. Shirakashi T., Maekawa K., Usui E. Flow stress of low carbon steel at high temperature and strain rate. Part 1. Property of incremental strain method in impact compression test with rapid heating and cooling systems. Bull. Jpn. Soc. Prec. Eng. 17(3):1983;161-166.
25. Yoshino M., Shirakashi T. Flow-stress equation including effects of strain rate and temperature history. Int. J. Mech. Sci. 39(12):1997;1345-1362.
26. E. Usui, T. Shirakashi, Mechanics of machining - from descriptive to predictive theory, in: On the Art of Cutting Metals - 75 Years Later, vol. 7, ASME, PED, New York, 1982, pp. 13-35.
27. Maekawa K., Shirakashi T., Usui E. Flow stress of low carbon steel at high temperature and strain rate. Part 2. Flow stress under variable temperature and variable strain rate. Bull. Jpn. Soc. Prec. Eng. 17(3):1983;167-172.
28. Lee W., Lin C. High temperature deformation behavior of Ti6Al4V alloy evaluated by high strain rate compression tests. J. Mater. Process. Technol. 75(1):1998;127-136.
29. Astakhov A.P. A treatise on material characterization in the metal cutting process. Part 1. A novel approach and experimental verification. J. Mater. Process. Technol. 96:1999;22-33.
30. Stevenson R. The measurement of parasitic forces in orthogonal cutting. Int. J. Mach. Tools Manuf. 38:1997;113-130.
31. S. Kalpakjian, Manufacturing Processes for Engineering Materials, 3rd ed., Addison-Wesley/Longman, Menlo Park, 1997.
32. J.M. Alexander, On problems of plastic flow of materials, in: A. Sawczuk, G. Bianchi (Eds.), Plasticity Today, Elsevier, London, 1985.