The nanoindentation responses of nickel surfaces with different crystal orientations

Molecular Simulation

Volumn 33, Issue 11, 2007, Pages 905-917

  Ju, S P ^a   Wang, C T ^a   Chien, C H ^a   Huang, J C ^a   Jian, S R ^b  

^a NATIONAL SUN YAT SEN UNIVERSITY   (Taiwan)

^b NATIONAL CHIAO TUNG UNIVERSITY   (Taiwan)

Author keywords

Dislocation; Elastic modulus; Hardness; Molecular dynamics; Nanoindentation; Nickel; Orientation effect; Pile up

Indexed keywords

ANISOTROPY; CRYSTAL ORIENTATION; ELASTIC MODULI; MOLECULAR DYNAMICS; NANOINDENTATION; NUCLEATION; PLASTIC DEFORMATION;

ATOMIC STRESS DISTRIBUTIONS; ORIENTATION EFFECT; SLIP ANGLE; SURFACE ORIENTATIONS;

NICKEL;

EID: 35448936727     PISSN: 08927022     EISSN: 10290435     Source Type: Journal    
DOI: 10.1080/08927020701392954     Document Type: Article

References (81)

1. J.F. Lin, C.C. Wei, Y.K. Yung, C.F. Ai. The effects of hydrogenated carbon films with different film thickness and nitrogen content on specimen mechanical properties, scratch critical load, adhesion work and tribological behavior. Diam. Relat. Mat., 13, 1895 (2004).
2. K.D. Bouzakis, S. Hadjiyiannis, G. Skordaris, I. Mirisidis, N. Michailidis, K. Efstathiou, E. Pavlidou, G. Erkens, R. Cremer, S. Rambadt, I. Wirth. The effect of coating thickness, mechanical strength and hardness properties on the milling performance of PVD coated cemented carbides inserts. Surf. Coat. Technol., 177, 657 (2004).
3. B.C. Zhang, G. Barth, H.K. Liu, S. Chang. Characterization of nickel phosphorus surface by ToF-SIMS. Appl. Surf. Sci., 231, 868 (2004).
4. R. Ji, T. Liew, C.H. Seek, T.C. Chong. Corrosive effect of acrylic acid on magnetic head and media of an operating hard disk drive. Tribol. Int., 38, 692 (2005).
5. D. Son, J.J. Kim, J.Y Kim, D. Kwon. Tensile properties and fatigue crack growth in LIGA nickel MEMS structures. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Proces., 406, 274 (2005).
6. E. Slavcheva, W Mokwa, U. Schnakenberg. Electrodeposition and properties of NiW films for MEMS application. Electrochim. Acta, 50, 5573 (2005).
7. B. Li, Q. Chen, D.G. Lee, J. Woolman, G.P. Carman. Development of large flow rate, robust, passive micro check valves for compact piezoelectrically actuated pumps. Sens. Actuat. A Phys., 117, 325 (2005).
8. E. Gomez, E. Pellicer, M. Duch, J. Esteve, E. Valles. Molybdenum alloy electrodeposits for magnetic actuation. Electrochim. Acta, 51, 3214 (2006).
9. M. Zhao, C. Jiang, S. Li, S.X. Mao. Probing nano-scale mechanical characteristics of individual semi-conducting nanobelts. Mater. Sci. Eng A Struct. Mater. Prop. Microstruct. Proces., 409, 223 (2005).
10. A. Gouldstone, H.J. Koh, K.Y. Zeng, A.E. Giannakopoulos, S. Suresh. Discrete and continuous deformation during nanoindenta-tion of thin films. Acta Mater., 48, 2277 (2000).
11. A.A. Voevodin, M.A. Capano, S.J.P. Laube, M.S. Donley, J.S. Zabinski. Design of a Ti/TiC/DLC functionally gradient coating based on studies of structural transitions in Ti-C thin films. Thin Sol. Films, 298, 107(1997).
12. B. Alder, T. Wainwright. Studies in molecular dynamics: I. General method. J. Chem. Phys., 31, 459 (1959).
13. B. Alder, T. Wainwright. Studies in molecular dynamics: II. Behavior of a small number of elastic spheres. J. Chem. Phys., 33, 1439 (1960).
14. W.G. Hoover, A.J. De Groot, C.G. Hoover, I.F. Stowers, T. Kawai, B.L. Holian, T. Boku, S. Ihara, J. Belak. Large scale elastic-plastic indentation simulations via non-equilibrium, molecular dynamics. Phys. Rev. A, 42, 5844 (1990).
15. J. Belak, D.B. Boercker, I.F. Stowers. Simulation of nanometer scale deformation of metallic and ceramic surfaces. MRS Bull., 18, 55 (1993).
16. U. Landman, W.D. Luedtke, N.A. Burnham, R.J. Colton. Atomistic mechanisms and dynamics of adhesion, nanoindentation, and fracture. Science, 248, 454 (1990).
17. U. Landman, W.D. Luedtke. Nanomechanics and dynamics of tipsubstrate interactions. J. Vac. Sci. Technol., 9, 414 (1991).
18. U. Landman, W.D. Luedtke, E.M. Ringer. Atomistic mechanisms of adhesive contact formation and interfacial processes. Wear, 153, 3 (1992).
19. U. Landman, W.D. Luedtke. Atomistic dynamics of interfacial processes: films, junctions, and nanostructure. Appl. Surf Sci., 92, 237 (1996).
20. R. Komanduri, N. Chandrasekaran, L.M. Raff. MD simulation of nanometric cutting of single crystal aluminum-effect of crystal orientation and direction of cutting. Wear, 242, 60 (2000).
21. R. Komanduri, N. Chandrasekaran, L.M. Raff. Effect of tool geometry in nanometric cutting: a molecular dynamics simulation approach. Wear, 219, 84 (1998).
22. S. Shimada. Molecular dynamics analysis of nanometric cutting process, Int. J. Jpn. Soc. Precis. Eng., 29, 283 (1995).
23. T. Inamura, H. Suzuki, N. Takezawa. Cutting experiments in a computer using atomic models of copper crystal and diamond tool. Int. J. Jpn. Soc. Precis. Eng., 25, 259 (1991).
24. K. Maekawa, A. Itoh. Friction and tool wear in nanoscale machining-molecular dynamics approach. Wear, 188, 115 (1995).
25. N. Chandrasekaran, A. Noori-Khajavi, L.M. Raff, R. Komanduri. A new method for molecular dynamics simulation of nanometric cutting. Philos. Mag., 77, 7 (1998).
26. R. Komanduri, N. Chandrasekaran, L.M. Raff. Some aspects of machining with negative rake tools simulating grinding: an MD simulation approach. Philos. Mag., 79, 955 (1999).
27. O. Tomagnini, F. Ercolessi, E. Tosatti. Microscopic interaction between a gold tip and lead surface. Surf. Sci., 287, 1041 (1993).
28. D.W. Brenner, S.B. Sinnott, J.A. Harrison, O.A. Shenderova. Simulated engineering of nanostructures. Nanotechnology, 1, 161 (1996).
29. R. Rentsch, I. Inasaki. Indentation simulation on brittle materials by molecular dynamics. SPIE, 2596, 214 (1995).
30. J.A. Harrison, D.W. Brenner, C.T. White, R.J. Colton. Atomistic mechanisms of adhesion and compression of diamond surfaces. Thin Sol. Films, 206, 213 (1991).
31. W. Yan, K. Komvopoulos. Three-dimensional molecular dynamics analysis of atomic-scale indentation. J. Tribal. Trans. ASME, 120, 385 (1998).
32. J.A. Harrison, C.T. White, R.J. Colton, D.W. Brenner. Molecular dynamics simulations of atomic-scale friction of diamond surfaces. Phys. Rev. B, 46, 9700 (1992).
33. A. Buldum, S. Ciraci. Contact, nanoindentation, and sliding friction. Phys. Rev. B, 57, 2468 (1998).
34. D.E. Kim, N.P. Suh. Molecular dynamics investigation of two dimensional atomic-scale friction. J. Tribal. Trans. ASME, 116, 225 (1994).
35. M. Hirano, K. Shinjo. Atomistic locking and friction. Phys. Rev. B, 41, 11837 (1990).
36. R. Komanduri, N. Chandrasekaran, L.M. Raff. Molecular dynamics simulation of atomic-scale friction. Phys. Rev B, 61, 14007 (2000).
37. P. Walsh, R.K. Kalia, A. Nakano, P. Vashishta. Amortization and anisotropic fracture dynamics during nanoindentation of silicon nitride: a multimillion atom, molecular dynamics study. Appl. Phys. Lett., 11, 4332 (2000).
38. P. Walsh, A, Omeltchenko, R.K. Kalia, A. Nakano, P. Vashishta. Nanoindentation of silicon nitride: a multimillion-atom. molecular dynamics study. Appl. Phys. Lett., 82, 118 (2003).
39. F.K. Mante, G.R. Baran, B. Lucas. Nanoindentation studies of titanium single crystals. Biomaterials, 20, 1051 (1999).
40. Y. Wang, D. Raabe, C. Kluber, F. Roters. Orientation dependence of nanoindentation pile-up patterns and of nanoindentation microtextures in copper single crystals. Acta Mater., 52, 2229 (2004).
41. R. Komanduri, N. Chandrasekaran, L.M. Raff. MD simulation of indentation and scratching of single crystal aluminum. Wear, 240, 113 (2000).
42. O. Kum. Orientation effects of elastic-plastic deformation at surfaces: nanoindentation of nickel single crystals. Mol. Simul., 31, 115 (2005).
43. Y.R. Jeng, P.C. Tsai, T.H. Fang. Molecular dynamics studies of atomic-scale friction for roller-on-slab systems with different rolling-sliding conditions. Nanotechnology, 16, 1941 (2005).
44. D. Frenkel, B. Smit. Understanding Molecular Simulation, 2nd ed., (2002).
45. S. Plimpton. Computational limits of classical molecular dynamics simulations. J. Comput. Phys., 117, 1 (1995).
46. F. Cleri, V. Rosato. Tight-binding potentials for transition metals and alloys. Phys. Rev B, 48, 22 (1993).
47. Y. Lee, J.Y Park, S.Y. Kim, S. Jun, S. Im. Atomistic simulations of incipient plasticity under Al (111) nanoindentation. Mech. Mater., 37, 1035 (2005).
48. C. Zhu, W. Guo, TX. Yu, C.H. Woo. Radial compression of carbon nanotubes: deformation and damage, super-elasticity and superhardness. Nanotechnology, 16, 1035 (2005).
49. H.Y. Liang, C.H. Woo, H. Huang, A.H.W. Ngan, TX. Yu. Dislocation nucleation in the initial stage during nanoindentation. Philos. Mag., 83, 3609 (2003).
50. V. Yamakov, D. Wolf, S.R. Phillpot, A.K. Mukherjee, H. Gleiter. Dislocation processes in the deformation of nanocrystalline aluminium by molecular-dynamics simulation. Nature, 1, 1 (2002).
51. T.H. Fang, S.R. Jian, D.S. Chuu. Molecular dynamics analysis of effects of velocity and loading on the nanoindentation. Jpn. J Appl. Phys., 41, L1328 (2002).
52. D. William, J.R. Callister. Materials Science and Engineering, 6th ed., (2003).
53. N. Miyazaki, Y Shiozaki. Calculation of mechanical properties of solids using molecular dynamics. JSME Int. J. Ser. A Solid Mech. Mat. Eng., 39, 606 (1996).
54. D. Srolovitz, K. Maeda, V. Vitek, T. Egami. Structural defects in amorphous solids: statistical analysis of a computer model. Philos, Mag., 44, 847 (1981).
55. D. Saraev, R.E. Miller. Atomic-scale simulations of nanoindentation- induced plasticity in copper crystals with nanometer-sized nickel coatings. Acta Mater., 54, 33 (2006).
56. T. Zhu, J. Li, K.J. Van Vliet, S. Ogata, S. Yip, S. Suresh. Predictive modeling of nanoindentation-induced homogeneous dislocation nucleation in copper. J. Mech. Phys. Solids, 52, 691 (2004).
57. K.J. Van Vliet, J. Li, T. Zhu, S. Yip, S. Suresh. Quantifying the early stages of plasticity through nanoscale experiments and simulations. Phys. Rev. B, 67, 104105 (2003).
58. C.L. Kelchner, S.J. Plimpton, J.C. Hamilton. Dislocation nucleation and defect structure during surface indentation. Phys. Rev. B, 58, 11085 (1998).
59. D. Hull, D.J. Bacon. Introduction to Dislocations, 4th ed., (2001).
60. W.M. Huang, J.F. Su, M.H. Hong, B. Yang. Pile-up and sink-in in micro-indentation of a NiTi shape-memory alloy. Scr. Mater., 53, 1055 (2005).
61. H.C. Barshilia, K.S. Rajam. Characterization of Cu/Ni multilayer coatings by nanoindentation and atomic force microscopy. Surf. Coat. Technol., 155, 195 (2002).
62. W.C. Oliver, G.M. Pharr. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res., 7, 1564 (1992).
63. H. Ni, X. Li, H. Gao, T.P. Nguyen. Nanoscale structural and mechanical characterization of bamboo-like polymer/silicon nanocomposite films. Nanotechnology, 16, 1746 (2005).
64. R. A. Mirshams, R.M. Pothapragada. Correlation of nanoindentation measurements of nickel made using geometrically different indenter tips. Acta Mater., 54, 1123 (2006).
65. L. Riester, P.J. Blau, E. Lara-Curzio, K. Breder. Nanoindentation with a Knoop indenter. Thin Sol. Films, 377, 635 (2000).
66. J.L. Bucaille, S. Stauss, P. Schwaller, J. Michler. A new technique to determine the elastoplastic properties of thin metallic films using sharp indenters. Thin Sol Films, 447, 239 (2004).
67. R. Schwaiger, B. Moser, M. Dao, N. Chollacoop, S. Suresh. Some critical experiments on the strain-rate sensitivity of nanocrystalline nickel. Acta Mater., 51, 5159 (2003).
68. J.A.D. Jensen, P.O.A. Persson, K. Pantleon, M. Oden, L. Hultman. Electrochemically deposited nickel membranes; process-micro-structure-property relationships. Surf. Coat. Technal., 172, 79 (2003).
69. R. Mitra, R. A. Hoffman, A. Madan, J.R. Weertman. Effect of process variables on the structure, residual stress and hardness of sputtered nanocrystalline nickel films. J. Mater. Res., 16, 1010 (2001).
70. R.A. Mirshams, P. Padama. Nanoindentation of nanocrystalline Ni with geometrically different indenters. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Proces., 372, 252 (2004).
71. M. Kopycinska-Muller, R.H. Geiss, J. Muller, D.C. Hurley. Elastic-property measurements of ultrathin films using atomic force acoustic microscopy. Nanotechnology, 16, 703 (2005).
72. D. Mulliah, S.D. Kenny, E. McGee, R. Smith, A. Richter, B. Wolf. Atomistic modelling of ploughing friction in silver, iron and silicon. Nanotechnology, 17, 1807 (2006).
73. R. Smith, D. Christopher, S.D. Kenny. Defect generation and pileup of atoms during nanoindentation of Fe single crystals. Phys. Rev. B, 67, 245405 (2003).
74. P. Walsh, A. Omeltchenko, R.K. Kalia, A. Nakano, P. Vashishta. Nanoindentation of silicon nitride: a multimillion-atom molecular dynamics study. Appl. Phys. Lett., 82, 118 (2003).
75. R. Astala, M. Kaukonen, R.M. Nieminen. Nanoindentation of silicon surfaces: molecular-dynamics simulations of atomic force microscopy. Phys. Rev. B, 61, 2973 (2000).
76. T.H. Fang, W.J. Chang, C.I. Weng. Nanoindentation and nanomachining characteristics of gold and platinum thin films. Mater. Sci. Eng. A Struct. Mater Prop. Microstruct. Proces., 430, 332 (2006).
77. A. Noreyan, J.G. Amar, I. Marinescu. Molecular dynamics simulations of nanoindentation of beta-SiC with diamond indenter. Mater. Sci. Eng. B Solid State Mater. Adv. Technol, 117, 235 (2005).
78. T.H. Fang, C.I. Weng, J.G. Chang. Molecular dynamics analysis of temperature effects on nanoindentation measurement. Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct Process, 357, 7 (2003).
79. J.Y. Hsieh, S.P. Ju, S.H. Li, C.C. Hwang. Temperature dependence in nanoindentation of a metal substrate by a diamondlike tip. Phys. Rev B, 70, 195424 (2004).
80. S.R. Jian, T.H. Fang, D.S. Chuu, L.W. Ji. Atomistic modeling of dislocation activity in nanoindented GaAs. Appl. Surf. Sci., 253, 833 (2006).
81. A. Richter, R. Ries, R. Smith, M. Henkel, B. Wolf. Nanoindentation of diamond, graphite and fullerene films. Diam. Relat. Mat., 9, 170 (2000).