Self-adaptive wear behavior of nano-multilayered TiAlCrN/WN coatings under severe machining conditions

Surface and Coatings Technology

Volumn 201, Issue 3-4, 2006, Pages 1852-1860

  Fox Rabinovich, G S ^a   Yamamoto, K ^b   Veldhuis, S C ^a   Kovalev, A I ^c   Shuster, L S ^d   Ning, L ^a  

^a MCMASTER UNIVERSITY   (Canada)

^b KOBE STEEL LTD   (Japan)

^c CNIICHERMET   (Russian Federation)

^d Birsk Branch of Federal State Budgetary Educational Establishment of Higher Education Bashkir State University   (Russian Federation)

Author keywords

High performance dry machining; Nano multilayered TiAlCr WN films; PVD; Self adaptive coatings

Indexed keywords

ELASTIC MODULI; ENERGY DISPERSIVE SPECTROSCOPY; FRICTION; MICROHARDNESS; MULTILAYERS; NANOSTRUCTURED MATERIALS; SCANNING ELECTRON MICROSCOPY; SURFACE STRUCTURE; TRANSMISSION ELECTRON MICROSCOPY; TRIBOLOGY; WEAR OF MATERIALS; X RAY PHOTOELECTRON SPECTROSCOPY;

HIGH-PERFORMANCE DRY MACHINING; SELF-ADAPTIVE COATINGS;

TITANIUM NITRIDE;

ELASTIC MODULI; ENERGY DISPERSIVE SPECTROSCOPY; FRICTION; MICROHARDNESS; MULTILAYERS; NANOSTRUCTURED MATERIALS; SCANNING ELECTRON MICROSCOPY; SURFACE STRUCTURE; TITANIUM NITRIDE; TRANSMISSION ELECTRON MICROSCOPY; TRIBOLOGY; WEAR OF MATERIALS; X RAY PHOTOELECTRON SPECTROSCOPY;

EID: 33748417116     PISSN: 02578972     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.surfcoat.2006.03.010     Document Type: Article

References (46)

1. Yamamoto K., Kujime S., and Takahara K. Surf. Coat. Technol. 200 1-4 (2005) 435
2. Elam J.W., Sechrist Z.A., and George S.M. Thin Solid Films 414 (2002) 43
3. Kukli K., Ihanus J., Ritala M., and Leskela M. Appl. Phys. Lett. 68 (1996) 3737
4. Kukli K., Ritala M., and Leskela M. J. Appl. Phys. 86 (1999) 5656
5. Zhang H., Solanki R., Roberds B., Bai G., and Banerjee I. J. Appl. Phys. 87 (2000) 1921
6. Wang Z.Y., and Sada T. J. Electrochem. Soc. 147 (2000) 4615
7. Zhang H., and Solanki R. J. Electrochem. Soc. 148 (2001) F63
8. Kukli K., Ritala M., and Leskela M. J. Electrochem. Soc. 148 (2001) F35
9. Matero R., Ritala M., Leskela M., Salo T., Aromaa J., and Forsen O. J. Phys., IV 9 (1999) 493
10. Daia M.B., Aubert P., Labdi S., Sant C., Sadi F.A., Houdy P., and Bozet I.L. J. Appl. Phys. 87 (2000) 7753
11. Madan A., Wang Y.Y., Bamett S.A., Engstrom C., Ljungcrantz H., Hultrnan L., and Grimsditch M. J. Appl. Phys. 84 (1998) 776
12. Chu X., Wong M.S., Sproul W.D., and Bamett S.A. J. Mater. Res. 14 (1999) 2500
13. Yashar P.C., and Sproul W.D. Vacuum 55 (1999) 179
14. Was G.S., and Foecke T. Thin Solid Films 286 (1996) I
15. Hahn H., and Averback R.S. Nanostruct. Mater. 1 (1992) 95
16. Hahn H. Nanostruct. Mater. 2 (1993) 251
17. Blondo E., and Hubler R. Surf. Coat. Technol. 158-159 (2002) 685
18. Vashar, Barnett S., Hultman L., and Sproul W.D. J. Mater. Res. 14 (1999) 3614
19. Hirano T., Izaki K., and Niihara K. Nanostruct. Mater. 5 (1995) 809
20. Uekubo M., Oku T., Nii K., Murakami M., Takahiro M.K., Vamaguchi S., Nakano T., and Ohta T. Thin Solid Films 286 (1996) 170
21. Li D., Lin X.W., and Chen S.C. Appl. Phys. Lett. 68 (1996) 1211
22. Elersa K.-E., Saanila V., Li W.-M., Soininen P.J., Kostamo J.T., Haukka S., Juhanoja J., and Besling W.F.A. Thin Solid Films 434 (2003) 94
23. Costescu R.M., Cahill D.G., Fabreguette F.H., Sechrist Z.A., and George S.M. Science 303 5660 (2004) 989-990
24. Bobeth M., Ullrich A., and Pompe W. Journal of Matastable and Nanocrystalline Materials vol. 19 (2004), Trans Tech Publications, Switzerland 153
25. De Loach J.D., Shibilski J.J., Crape C.R., and Aita C.R. J. Vac. Sci. Technol., A 18 (2000) 6
26. Helmersson U., Todorova S., Bamett S.A., Sundgren I.E., Markert L.C., and Greene I.E. J. Appl. Phys. 62 (1987) 481
27. Mirakami P.B., Hultman L., and Bamett S.A. Appl. Phys. Lett. 57 (1990) 2654
28. Shinn M., Hultman L., and Bamett S.A. J. Mater. Res. 7 (1992) 901
29. Ulrich S., Ziebert C., Stüber M., Nold E., Holleck H., Göken M., Schweitzer E., and Schloβmacher P. Surf. Coat. Technol. 188-189 (2004) 331
30. Nordin M., Sundström R., Selinder T.I., and Hogmark S. Surf. Coat. Technol. 133-134 (2000) 240
31. Nordin M., Larsson M., and Hogmark S. Surf. Coat. Technol. 106 (1998) 234
32. Selinder T.I., Sjöstrand M.E., Nordin M., Larsson M., Östlund Å., and Hogmark S. Surf. Coat. Technol. 105 (1998) 51
33. Muntz W.-D.M. J. Vac. Sci. Technol., A 416 (1986) 2717
34. PalDey S., and Deevi S.C. Mater. Sci. Eng., A Struct. Mater.: Prop. Microstruct. Process. 342 (2003) 58
35. Yamamoto K., Sato T., Takahara K., and Hanaguri K. Surf. Coat. Technol. 174/175 (2003) 620
36. Fox-Rabinovich G.S., Yamomoto K., Veldhuis S.C., Kovalev A.I., and Dosbaeva G.K. Surf. Coat. Technol. 200 (2005) 1804 (Issues)
37. G.S. Fox-Rabinovich, A.I. Kovalev, L.S. Shuster, S.C. Veldhuis, I.S. Gershman, Surface Engineered Tool Materials for High Performance Machining and Stamping Applications, in: G.S. Fox- Rabinovich, G. Toten (Eds), Self-organization during friction and principles of nano-structured coatings design, Taylor and Francis/CRC Press, in press.
38. Ho W.Y., Huang D.-H., Hsu C.-H., and Wang D.-Y. Surf. Coat. Technol. 177-178 (2004) 172
39. Erdemir A. Tribol. Lett. 8 (2000) 97
40. S.C. Veldhuis, L.S. Shuster, G.S. Fox-Rabinovich, Lubricants to Enhance Tribological Compatibility of the 'Tool/Workpiece' Tribosystem, in: G.S. Fox- Rabinovich, G. Toten (Eds), Self-organization during friction and principles of nano-structured coatings design, Taylor and Francis/CRC Press, in press.
41. Fox-Rabinovich G.S., Kovalev A.I., and Weatherly G.C. In: Totten G.E., Xie L., and Funatani K. (Eds). Handbook" Modeling and Simulation for Material Selection and Mechanical Design" (2004), Marcel Dekker, New York 301
42. Trent E.M., and Wright P.K. Metal Cutting. 4-th ed (2000), Butterworth, Woburn MA
43. Ning Y., Rahman Y., and Wong S. J. Mater. Process. Technol. 113 (2001) 360
44. Kragelski I.V., Dobychin N.M., and Kombalov V.S. Foundations of Calculations of Friction and Wear (1977), Mashinostroenie, Moscow
45. Gachon J.-C., Rogachev A.S., Grigorian H.E., Illarionova E.V., Kuntz J.-J., and Kovalev A.N. Acta Mater. 53 (2005) 1225
46. Yamamoto K., Kujime S., and Takahara K. Surf. Coat. Technol. 200 (2005) 1383