Continuous maintenance and the future – Foundations and technological challenges

CIRP Annals - Manufacturing Technology

Volumn 65, Issue 2, 2016, Pages 667-688

  Roy, R ^a   Stark, R ^b   Tracht, K ^c   Takata, S ^d   Mori, M ^e  

^a CRANFIELD UNIVERSITY   (United Kingdom)

^b TECHNISCHE UNIVERSITÄT BERLIN   (Germany)

^c UNIVERSITY OF BREMEN   (Germany)

^d WASEDA UNIVERSITY   (Japan)

^e Mori Seiki Co   (Japan)

Author keywords

Lifecycle; Maintenance; Service

Indexed keywords

BIG DATA; MAINTENANCE;

CONTINUOUS MAINTENANCE; CYBER SECURITY; LONG LIFE; MAINTENANCE SERVICES; SERVICE; SYSTEM LEVELS; TECHNOLOGICAL CHALLENGES; THROUGH LIFE COSTS;

LIFE CYCLE;

EID: 84978488604     PISSN: 00078506     EISSN: 17260604     Source Type: Journal    
DOI: 10.1016/j.cirp.2016.06.006     Document Type: Article

References (202)

1. [1] Adagha, O., Levy, R.M., Carpendale, S., Towards a Product Design Assessment of Visual Analytics in Decision Support Applications: A Systematic Review. Journal of Intelligent Manufacturing, 2015.
2. [2] Alghassi, A., Perinpanayagam, S., Samie, M., Sreenuch, T., Computationally Efficient, Real-Time, and Embeddable Prognostic Techniques for Power Electronics. IEEE Transactions on Power Electronics 30 (2015), 2623–2634.
3. [3] Allwood, J.M., Childs, T.H.C., Clare, A.T., De Silva, A.K.M., Dhokia, V., Hutchings, I.M., et al. Manufacturing at Double the Speed. Journal of Materials Processing Technology 229 (2016), 729–757.
4. [4] Alrabghi, A., Tiwari, A., State of the Art in Simulation-based Optimisation for Maintenance Systems. Computers & Industrial Engineering 82 (2015), 167–182.
5. [5] Applus, Applus RTD Introduces Augmented Reality to NDT. 2014 (accessed 03.01.16).
6. [6] Arnaiz, A., Konde, E., Alarcón, J., Continuous Improvement on Information and On-line Maintenance Technologies for Increased Cost-effectiveness. Procedia CIRP 11 (2013), 193–198.
7. [7] Arnaiz, A., Revilla, O., Saccani, N., Extending Manufacturing Towards Service-oriented Business Models: The T-REX Technological Levers that Support This Extension. Proc. 3rd Int. Bus. Servitization Conf. Nov. 2014, Bilbao, Spain, 2014.
8. [8] Basole, R.C., Qamar, A., Park, H., Paredis, C.J.J., McGinnis, L.F., Visual Analytics for Early-Phase Complex Engineered System Design Support. IEEE Computer Graphics and Applications 35 (2015), 41–51.
9. [9] Bergmann, A., Grosser, H., Graf, B., Uhlmann, E., Rethmeier, M., Stark, R., Additive Prozesskette zur Instandsetzung von Bauteilen. Laser Technik Journal 10 (2013), 31–35.
10. [10] Birger, E.M., Moskvitin, G.V., Polyakov, A.N., Arkhipov, V.E., Industrial Laser Cladding: Current State and Future. Welding International 25 (2011), 234–243.
11. [11] De Boer, R., Schutten, J.M.J., Zijm, W.H.M., A Decision Support System for Ship Maintenance Capacity Planning. CIRP Annals – Manufacturing Technology 46 (1997), 391–396.
12. [12] Boessenkool, H., Abbink, D.A., Heemskerk, C.J.M., Steinbuch, M., de Baar, M.R., Wildenbeest, J.G.W., et al. Analysis of Human-in-the-Loop Tele-operated Maintenance Inspection Tasks Using VR. Fusion Engineering and Design 88 (2013), 2164–2167.
13. [13] Bongard, J., Zykov, V., Lipson, H., Resilient Machines Through Continuous Self-Modeling. Science (80-) 314 (2006), 1118–1121.
14. [14] Borgia, E., The Internet of Things Vision: Key Features, Applications and Open Issues. Computer Communications 54 (2014), 1–31.
15. [15] Botta, A., de Donato, W., Persico, V., Pescapé, A., Integration of Cloud Computing and Internet of Things: A Survey. Future Generation Computer Systems 56 (2015), 684–700.
16. [16] Brandon, E.J., Vozoff, M., Kolawa, E.A., Studor, G.F., Lyons, F., Keller, M.W., et al. Structural Health Management Technologies for Inflatable/Deployable Structures: Integrating Sensing and Self-healing. Acta Astronautica 68 (2011), 883–903.
17. [17] Bu, C., Tang, Q., Liu, Y., Jin, X., Sun, Z., Yan, Z., A theoretical study on Vertical Finite Cracks Detection Using Pulsed Laser Spot Thermography (PLST). Infrared Physics and Technology 71 (2015), 475–480.
18. [18] Capello, E., Colombo, D., Previtali, B., Repairing of Sintered Tools Using Laser Cladding by Wire. Journal of Materials Processing Technology 164–165 (2005), 990–1000.
19. [19] Cirani, S., Ferrari, G., Veltri, L., Enforcing Security Mechanisms in the IP-Based Internet of Things: An Algorithmic Overview. Algorithms 6 (2013), 197–226.
20. [20] Colledani, M., Ekvall, M., Lundholm, T., Moriggi, P., Polato, A., Tolio, T., Analytical Methods to Support Continuous Improvements at Scania. International Journal of Production Research 48 (2010), 1913–1945.
21. [21] Colledani, M., Tolio, T., Integrated Quality, Production Logistics and Maintenance Analysis of Multi-stage Asynchronous Manufacturing Systems With Degrading Machines. CIRP Annals – Manufacturing Technology 61 (2012), 455–458.
22. [22] Colledani, M., Tolio, T., Fischer, A., Iung, B., Lanza, G., Schmitt, R., et al. Design and Management of Manufacturing Systems for Production Quality. CIRP Annals – Manufacturing Technology 63 (2014), 773–796.
23. [23] De Crescenzio, F., Fantini, M., Persiani, F., Di Stefano, L., Azzari, P., Salti, S., Augmented Reality for Aircraft Maintenance Training and Operations Support. IEEE Computer Graphics and Applications 31 (2011), 96–101.
24. [24] Crossley, T.R., Merchant, M.E., A System to Assist in the Running of Complex Industrial Processes. CIRP Annals – Manufacturing Technology 30 (1981), 377–381.
25. [25] Cunha, P.F., Wiendahl, H.-P., Knowledge Acquisition from Assembly Operational Data Using Principal Components Analysis and Cluster Analysis. CIRP Annals – Manufacturing Technology 54 (2005), 27–30.
26. [26] Cunha, P.F.F., Duarte, J.A.C., Alting, L., Development of a Productive Service Module Based on a Life Cycle Perspective of Maintenance Issues. CIRP Annals – Manufacturing Technology 53 (2004), 13–16.
27. [27] Datta, P.P., Roy, R., Cost Modelling Techniques for Availability Type Service Support Contracts: A Literature Review and Empirical Study. CIRP Journal of Manufacturing Science and Technology 3 (2010), 142–157.
28. [28] Datta, P.P., Srivastava, A., Roy, R., A Simulation Study on Maintainer Resource Utilization of a Fast Jet Aircraft Maintenance Line Under Availability Contract. Computers in Industry 64 (2013), 543–555.
29. [29] Deng, S., Hua, L., Han, X., Huang, S., Finite Element Analysis of Fatigue Life for Deep Groove Ball Bearing. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 227 (2012), 70–81.
30. [30] Denkena, B., Mörke, T., Krüger, M., Schmidt, J., Boujnah, H., Meyer, J., et al. Development and First Applications of Gentelligent Components Over Their Lifecycle. CIRP Journal of Manufacturing Science and Technology 7 (2014), 139–150.
31. [31] Derigent, W., Thomas, E., Levrat, E., Iung, B., Opportunistic Maintenance Based on Fuzzy Modelling of Component Proximity. CIRP Annals – Manufacturing Technology 58 (2009), 29–32.
32. [32] Dini, G., Mura, M.D., Application of Augmented Reality Techniques in Through-life Engineering Services. Procedia CIRP 38 (2015), 14–23.
33. [33] Do, P., Scarf, P., Iung, B., Condition-based Maintenance for a Two-Component System With Dependencies. IFAC-PapersOnLine 48 (2015), 946–951.
34. [34] Di Donato, M., Fiorentino, M., Uva, A.E., Gattullo, M., Monno, G., Text Legibility for Projected Augmented Reality on Industrial Workbenches. Computers in Industry 70 (2015), 70–78.
35. [35] Dosch, S., Spohrer, A., Fleischer, J., Reduced Commissioning Time of Components in Machine Tools Through Electronic Data Transmission. Procedia CIRP 29 (2015), 311–316.
36. [36] EC, Closing the Loop – An EU Action Plan for the Circular Economy. 2015, Commun. FROM Comm. TO Eur. Parliam. Counc. Eur. Econ. Soc. Comm. Comm. Reg. COM(2015) 614 final.
37. [37] Edidin, A., Jewett, C., Kalinowski, A., Kwarteng, K., Kurtz, S., Degradation of Mechanical Behavior in UHMWPE After Natural and Accelerated Aging. Biomaterials 21 (2000), 1451–1460.
38. [38] EPCGlobal Inc., EPCglobal, Inc., EPCglobal Object Name Service (ONS) 2.0.1. 2013.
39. [39] Esperon-Miguez, M., John, P., Jennions, I.K., A review of Integrated Vehicle Health Management Tools for Legacy Platforms: Challenges and Opportunities. Progress in Aerospace Sciences 56 (2013), 19–34.
40. [40] ETSI, Etsi, TC M2M, ETSI TS 102 921 v1.1.1 (2012-02) – Machine-to-Machine Communications (M2M); mIa, dIa and mId Interfaces (n.d.).
41. [41] Farinha, J.T., Galar, D., Proceedings of Maintenance Performance Measurement and Management (MPMM) Conference 2014, Imprensa da Universidade de Coimbra, Coimbra, 2014.
42. [42] Farnsworth, M., Tomiyama, T., Capturing, Classification and Concept Generation for Automated Maintenance Tasks. CIRP Annals – Manufacturing Technology 63 (2014), 149–152.
43. [43] Fernandes, H., Ibarra-Castanedo, C., Zhang, H., Maldague, X., Thermographic Non-destructive Evaluation of Carbon Fiber-Reinforced Polymer Plates After Tensile Testing. Journal of Nondestructive Evaluation, 34, 2015, 35.
44. [44] Ferreiro, S., Arnaiz, A., Sierra, B., Irigoien, I., Application of Bayesian Networks in Prognostics for a New Integrated Vehicle Health Management Concept. Expert Systems with Applications 39 (2012), 6402–6418.
45. [45] Fischer, F., Romoli, L., Kling, R., Laser-based Repair of Carbon Fiber Reinforced Plastics. CIRP Annals – Manufacturing Technology 59 (2010), 203–206.
46. [46] Foresight, The Future of Manufacturing: A New Era of Opportunity and Challenge for the UK. 2013.
47. [47] Frazier, W.E., Metal Additive Manufacturing: A Review. Journal of Materials Engineering and Performance 23 (2014), 1917–1928.
48. [48] Frei, R., McWilliam, R., Derrick, B., Purvis, A., Tiwari, A., Di Marzo Serugendo, G., Self-healing and Self-repairing Technologies. International Journal of Advanced Manufacturing Technology 69 (2013), 1033–1061.
49. [49] Gandomi, A., Haider, M., Beyond the Hype: Big Data Concepts, Methods, and Analytics. International Journal of Information Management 35 (2015), 137–144.
50. [50] Gao, R., Wang, L., Teti, R., Dornfeld, D., Kumara, S., Mori, M., et al. Cloud-enabled Prognosis for Manufacturing. CIRP Annals – Manufacturing Technology 64 (2015), 749–772.
51. [51] Gardner, World Machine-Tool Output & Consumption Survey. 2015.
52. [52] Gartner, Gartner's Top 10 Strategic Technology Trends for 2015. 2015.
53. [53] Graf, B., Ammer, S., Gumenyuk, A., Rethmeier, M., Design of Experiments for Laser Metal Deposition in Maintenance, Repair and Overhaul Applications. Procedia CIRP 11 (2013), 245–248.
54. [54] Graf, B., Gumenyuk, A., Rethmeier, M., Laser Metal Deposition as Repair Technology for Stainless Steel and Titanium Alloys. Physics Procedia 39 (2012), 376–381.
55. [55] Grosser, H., Neumann, S., Kuhn, D., Instandhaltungsgerechtes Konstruieren: Digitale Unterstützungspotenziale des Produktentwicklungsprozesses, Zeitschrift Für Wirtschaftlichen Fabrikbetr. ZWF 106 (2011), 979–983.
56. [56] Grosser, H., Politz, F., Beckmann-Dobrev, B., et al. Computertomographie für die Instandhaltung von elektronischen Baugruppen, Zeitschrift Für Wirtschaftlichen Fabrikbetr. ZWF 107 (2012), 139–143.
57. [57] Gu, J., Ding, J., Williams, S.W., Gu, H., Ma, P., Zhai, Y., The Effect of Inter-layer Cold Working and Post-deposition Heat Treatment on Porosity in Additively Manufactured Aluminum Alloys. Journal of Materials Processing Technology 230 (2015), 26–34.
58. [58] Gunnion, A.J., Herszberg, I., Parametric Study of Scarf Joints in Composite Structures. Composite Structures 75 (2006), 364–376.
59. [59] Hao, Y., Helo, P., The Role of Wearable Devices in Meeting the Needs of cloud Manufacturing: A Case Study. Robotics and Computer-Integrated Manufacturing, 2015.
60. [60] Harrington, M.J., Speck, O., Speck, T., Wagner, S., Weinkamer, R., Biological Archetypes for Self-Healing. Materials, 2015, 1–38.
61. [61] Hashem, I.A.T., Yaqoob, I., Badrul Anuar, N., Mokhtar, S., Gani, A., Ullah Khan, S., The rise of ‘Big Data’ on Cloud Computing: Review and Open Research Issues. Information Systems 47 (2014), 98–115.
62. [62] Heer, T., Garcia-Morchon, O., Hummen, R., Keoh, S.L., Kumar, S.S., Wehrle, K., Security Challenges in the IP-based Internet of Things. Wireless Personal Communications 61 (2011), 527–542.
63. [63] Herbert, C., Axinte, D.A., Hardy, M., Withers, P., Influence of Surface Anomalies Following Hole Making Operations on the Fatigue Performance for a Nickel-based Superalloy. Journal of Manufacturing Science and Engineering, 136, 2014, 051016.
64. [64] Herterich, M.M., Uebernickel, F., Brenner, W., The Impact of Cyber-physical Systems on Industrial Services in Manufacturing. Procedia CIRP 30 (2015), 323–328.
65. [65] Tsiatsis, V., Höller, J., Mulligan, C., From Machine-to-Machine to the Internet of Things: Introduction to a New Age of Intelligence. 2014, Academic Press, Oxford.
66. [66] Hong, C., Gu, D., Dai, D., Gasser, A., Weisheit, A., Kelbassa, I., et al. Laser Metal Deposition of TiC/Inconel 718 Composites With Tailored Interfacial Microstructures. Optics & Laser Technology 54 (2013), 98–109.
67. [67] van Houten, F.J.A.M., Kimura, F., Virtual Maintenance System: A Computer-based Support Tool for Robust Design, Product Monitoring, Fault Diagnosis and Maintenance Planning. CIRP Annals – Manufacturing Technology 49 (2000), 91–94.
68. [68] van Houten, F.J.A.M., Tomiyama, T., Salomons, O.W.W., Product Modelling for Model-based Maintenance. CIRP Annals – Manufacturing Technology 47 (1998), 123–128.
69. [69] Hsiao, E., Bradley, L.C., Kim, S.H., Improved Substrate Protection and Self-Healing of Boundary Lubrication Film Consisting of Polydimethylsiloxane With Cationic Side Groups. Tribology Letters 41 (2010), 33–40.
70. [70] Huang, H., Zhou, L., Chen, X.Q., Gong, Z.M., SMART Robotic System for 3D Profile Turbine Vane Airfoil Repair. International Journal of Advanced Manufacturing Technology 21 (2003), 275–283.
71. [71] Huynh, K.T., Barros, A., Berenguer, C., Adaptive Condition-based Maintenance Decision Framework for Deteriorating Systems Operating Under Variable Environment and Uncertain Condition Monitoring. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability 226 (2012), 602–623.
72. [72] Ibarra-Castanedo, C., Maldague, X.P., Review of Pulse Phase Thermography. (Tony) Hsieh, S.-J., Zalameda, J.N., (eds.) SPIE Sens. Technol. + Appl., 2015, International Society for Optics and Photonics, 94850T.
73. [73] Imre, S., Quantum Computing and Communications – Introduction and Challenges. Computers & Electrical Engineering 40 (2014), 134–141.
74. [74] Iung, B., Levrat, E., Advanced Maintenance Services for Promoting Sustainability. Procedia CIRP 22 (2014), 15–22.
75. [75] Iung, B., Levrat, E., Marquez, A.C., Erbe, H., Conceptual Framework for e-Maintenance: Illustration by e-Maintenance Technologies and Platforms. Annual Reviews in Control 33 (2009), 220–229.
76. [76] Iung, B., Levrat, E., Thomas, E., ‘Odds Algorithm’-based Opportunistic Maintenance Task Execution for Preserving Product Conditions. CIRP Annals – Manufacturing Technology 56 (2007), 13–16.
77. [77] Iung, B., Medina-Oliva, G., Weber, P., Levrat, E., Using Probabilistic Relational Models for Knowledge Representation of Production Systems: A New Approach to Assessing Maintenance Strategies. CIRP Annals – Manufacturing Technology 61 (2012), 419–422.
78. [78] Iung, B., Monnin, M., Voisin, A., Cocheteux, P., Levrat, E., Degradation State Model-based Prognosis for Proactively Maintaining Product Performance. CIRP Annals – Manufacturing Technology 57 (2008), 49–52.
79. [79] Iung, B., Véron, M., Suhner, M.C.C., Muller, A., Integration of Maintenance Strategies into Prognosis Process to Decision-Making Aid on System Operation. CIRP Annals – Manufacturing Technology 54 (2005), 5–8.
80. [80] Iyengar, S.S., Prasad, L., A General Computational Framework for Distributed Sensing and Fault-tolerant Sensor Integration. IEEE Transactions on Systems, Man and Cybernetics 25 (1995), 643–650.
81. [81] Jähne, B., Massen, R., Nickolay, B., Scharfenberg, H., Technische Bildverarbeitung – Maschinelles Sehen. 1996, Springer Berlin Heidelberg, Berlin, Heidelberg.
82. [82] Jiang, X., Duan, F., Tian, H., Wei, X., Optimization of Reliability Centered Predictive Maintenance Scheme for Inertial Navigation System. Reliability Engineering & System Safety 140 (2015), 208–217.
83. [83] Jin, C., Djurdjanovic, D., Ardakani, H.D., Wang, K., Buzza, M., Begheri, B., et al. A Comprehensive Framework of Factory-to-factory Dynamic Fleet-level Prognostics and Operation Management for Geographically Distributed Assets. 2015 IEEE Int. Conf. Autom. Sci. Eng., IEEE, 2015, 225–230.
84. [84] Jin, X., Wah, B.W., Cheng, X., Wang, Y., Significance and Challenges of Big Data Research. Big Data Research 2 (2015), 59–64.
85. [85] Kaihara, T., Fujii, N., Tsujibe, A., Nonaka, Y., Proactive Maintenance Scheduling in a Re-entrant Flow Shop Using Lagrangian Decomposition Coordination Method. CIRP Annals – Manufacturing Technology 59 (2010), 453–456.
86. [86] Kara, S., Assessing Remaining Useful Lifetime of Products. Wiley Encycl. Oper. Res. Manag. Sci., 2011, 1–14.
87. [87] Katnam, K.B., Da Silva, L.F.M., Young, T.M., Bonded Repair of Composite Aircraft Structures: A Review of Scientific Challenges and Opportunities. Progress in Aerospace Sciences 61 (2013), 26–42.
88. [88] Kerr, D., Pengilley, J., Garwood, R., Assessment and Visualisation of Machine Tool Wear Using Computer Vision. International Journal of Advanced Manufacturing Technology 28 (2005), 781–791.
89. [89] Knowles, W., Prince, D., Hutchison, D., Disso, J.F.P., Jones, K., A Survey of Cyber Security Management in Industrial Control Systems. International Journal of Critical Infrastructure Protection 9 (2015), 52–80.
90. [90] Kovács, A., Erdős, G., Viharos, Z.J., Monostori, L., Erds, G., Viharos, Z.J., et al. A System for the Detailed Scheduling of Wind Farm Maintenance. CIRP Annals – Manufacturing Technology 60 (2011), 497–501.
91. [91] Krco, S., Pokric, B., Carrez, F., Designing IoT Architecture(s): A European Perspective. 2014 IEEE World Forum Internet Things, IEEE, 2014, 79–84.
92. [92] Kumar, S., Mahto, D., Recent Trends in Industrial and Other Engineering Applications of Non Destructive Testing: A Review. Global Journal of Research in Engineering 13 (2013), 29–46.
93. [93] Kurada, S., Bradley, C., A Review of Machine Vision Sensors for Tool Condition Monitoring. Computers in Industry 34 (1997), 55–72.
94. [94] Lanza, G., Niggeschmidt, S., Werner, P., Optimization of Preventive Maintenance and Spare Part Provision for Machine Tools Based on Variable Operational Conditions. CIRP Annals – Manufacturing Technology 58 (2009), 429–432.
95. [95] Lanza, G., Niggeschmidt, S., Werner, P., Behavior of Dynamic Preventive Maintenance Optimization for Machine Tools. 2009 Annu. Reliab. Maintainab. Symp., IEEE, 2009, 315–320.
96. [96] Lavoué, G., Dupont, F., Baskurt, A., A New CAD Mesh Segmentation Method, Based on Curvature Tensor Analysis. Computer-Aided Design 37 (2005), 975–987.
97. [97] Lee, C.K.H., Choy, K.L., Law, K.M.Y., Ho, G.T.S., Application of Intelligent Data Management in Resource Allocation for Effective Operation of Manufacturing Systems. Journal of Manufacturing Systems 33 (2014), 412–422.
98. [98] Lee, H.-K., Effects of the Cladding Parameters on the Deposition Efficiency in Pulsed Nd:YAG Laser Cladding. Journal of Materials Processing Technology 202 (2008), 321–327.
99. [99] Lee, J., Ardakani, H.D., Yang, S., Bagheri, B., Industrial Big Data Analytics and Cyber-physical Systems for Future Maintenance & Service Innovation. Procedia CIRP 38 (2015), 3–7.
100. [100] Lee, J., Wu, F., Zhao, W., Ghaffari, M., Liao, L., Siegel, D., Prognostics and Health Management Design for Rotary Machinery Systems—Reviews, Methodology and Applications. Mechanical Systems and Signal Processing 42 (2014), 314–334.
101. [101] Lee, J.C., Kang, H.J., Chu, W.S., Ahn, S.H., Repair of Damaged Mold Surface by Cold-Spray Method. CIRP Annals – Manufacturing Technology 56 (2007), 577–580.
102. [102] Leunda, J., Soriano, C., Sanz, C., Navas, V.G., Laser Cladding of Vanadium-Carbide Tool Steels for Die Repair. Physics Procedia 12 (2011), 345–352.
103. [103] Levy, G.N., Schindel, R., Kruth, J.P., Rapid Manufacturing and Rapid Tooling With Layer Manufacturing (LM) Technologies, State of the Art and Future Perspectives. CIRP Annals – Manufacturing Technology 52 (2003), 589–609.
104. [104] Lindahl, M., Svensson, N., Svensson, B.H., Sundin, E., Industrial Cleaning With Qlean Water – A Case Study of Printed Circuit Boards. Journal of Cleaner Production 47 (2013), 19–25.
105. [105] Lizaranzu, M., Lario, A., Chiminelli, A., Amenabar, I., Non-destructive Testing of Composite Materials by Means of Active Thermography-based Tools. Infrared Physics and Technology 71 (2015), 113–120.
106. [106] Loving, A., Crofts, O., Sykes, N., Iglesias, D., Coleman, M., Thomas, J., et al. Pre-conceptual Design Assessment of DEMO Remote Maintenance. Fusion Engineering and Design 89 (2014), 2246–2250.
107. [107] Majstorovic, V.D.D., Milacic, V.R.R., An Expert System for Diagnosis and Maintenance in FMS. CIRP Annals – Manufacturing Technology 38 (1989), 489–492.
108. [108] Masood, T., Roy, R., Harrison, A., Xu, Y., Gregson, S., Reeve, C., Integrating Through-life Engineering Service Knowledge With Product Design and Manufacture. International Journal of Computer Integrated Manufacturing 28 (2014), 59–74.
109. [109] McKeegan, N., DARPA Advances Plans for Five Year Non-Stop Flying Machine. 2008, April.
110. [110] Medina-Oliva, G., Voisin, A., Monnin, M., Leger, J.-B., Predictive Diagnosis Based on a Fleet-wide Ontology Approach. Knowledge-Based Systems 68 (2014), 40–57.
111. [111] Mehnen, J., Tinsley, L., Roy, R., Automated In-service Damage Identification. CIRP Annals – Manufacturing Technology 63 (2014), 33–36.
112. [112] Mehta, R., UK Support and Service Industry a High Value Employer and a Net Exporter. 2015.
113. [113] Meier, H., Roy, R., Seliger, G., Industrial Product-Service Systems—IPS2. CIRP Annals – Manufacturing Technology 59 (2010), 607–627.
114. [114] Miorandi, D., Sicari, S., De Pellegrini, F., Chlamtac, I., Internet of Things: Vision, Applications and Research Challenges. Ad Hoc Networks 10 (2012), 1497–1500.
115. [115] Möhring, H.-C., Bertram, O., Integrated Autonomous Monitoring of Ball Screw Drives. CIRP Annals – Manufacturing Technology 61 (2012), 355–358.
116. [116] Mori, M., Fujishima, M., Komatsu, M., Zhao, B., Liu, Y., Development of Remote Monitoring and Maintenance System for Machine Tools. CIRP Annals – Manufacturing Technology 57 (2008), 433–436.
117. [117] Muhonen, T., Standardisation of Industrial Internet and IoT – Perspective on Condition-based Maintenance. 2015, University of Oulu.
118. [118] Muller, A., Crespo Marquez, A., Iung, B., On the Concept of e-Maintenance: Review and Current Research. Reliability Engineering & System Safety 93 (2008), 1165–1187.
119. [119] Munzinger, C., Fleischer, J., Broos, A., et al. Development and implementation of smart maintenance activities for machine tools. CIRP J. Manuf. Sci. Tech. 1 (2009), 237–246.
120. [120] Musallam, M., Johnson, C.M., Yin, C., Bailey, C., Mermet-Guyenne, M., Real-time life Consumption Power Modules Prognosis Using On-line Rainflow Algorithm in Metro Applications. 2010 IEEE Energy Convers. Congr. Expo., IEEE, 2010, 970–977.
121. [121] Nair, A., Raghunandan, K., Yaswant, V., Pillai, S.S., Sambandan, S., Maze Solving Automatons for Self-healing of Open Interconnects: Modular Add-on for Circuit Boards. Applied Physics Letters, 106, 2015, 123103.
122. [122] Nee, A.Y.C., Ong, S.K., Chryssolouris, G., Mourtzis, D., Augmented Reality Applications in Design and Manufacturing. CIRP Annals – Manufacturing Technology 61 (2012), 657–679.
123. [123] Neumann, U., Majoros, A., Cognitive, Performance, and Systems Issues for Augmented Reality Applications in Manufacturing and Maintenance. Proceedings IEEE 1998 Virtual Real. Annu. Int. Symp. (Cat. No. 98CB36180), IEEE Comput. Soc., 1998, 4–11.
124. [124] Nguyen, K.T., Laurent, M., Oualha, N., Survey on Secure Communication Protocols for the Internet of Things. Ad Hoc Networks 32 (2015), 17–31.
125. [125] Ni, J., Gu, X., Jin, X., Preventive Maintenance Opportunities for Large Production Systems. CIRP Annals – Manufacturing Technology 64 (2015), 447–450.
126. [126] Ni, J., Jin, X., Decision Support Systems for Effective Maintenance Operations. CIRP Annals – Manufacturing Technology 61 (2012), 411–414.
127. [127] Oh, H., Han, B., McCluskey, P., Han, C., Youn, B.D., Physics-of-Failure, Condition Monitoring, and Prognostics of Insulated Gate Bipolar Transistor Modules: A Review. IEEE Transactions on Power Electronics 30 (2015), 2413–2426.
128. [128] Olivier, F., Carlos, G., Florent, N., New Security Architecture for IoT Network. Procedia Computer Science 52 (2015), 1028–1033.
129. [129] Ong, S.K., Zhu, J., A Novel Maintenance System for Equipment Serviceability Improvement. CIRP Annals – Manufacturing Technology 62 (2013), 39–42.
130. [130] Palabiyik, I., Yilmaz, M.T., Fryer, P.J., Robbins, P.T., Toker, O.S., Minimising the Environmental Footprint of Industrial-scaled Cleaning Processes by Optimisation of a Novel Clean-in-place System Protocol. Journal of Cleaner Production 108 (2015), 1009–1018.
131. [131] Palumbo, D., Tamborrino, R., Galietti, U., Aversa, P., Tatì, A., Vam, L., Ultrasonic Analysis and Lock-In Thermography for Debonding Evaluation of Composite Adhesive Joints. NDT and E International 78 (2015), 1–9.
132. [132] Paul, C.P., Ganesh, P., Mishra, S.K., Bhargava, P., Negi, J., Nath, A.K., Investigating Laser Rapid Manufacturing for Inconel-625 Components. Optics & Laser Technology 39 (2007), 800–805.
133. [133] Petersen, N., Stricker, D., Cognitive Augmented Reality. Computers & Graphics 53 (2015), 82–91.
134. [134] Qi, H., Ganesan, S., Pecht, M., No-fault-found and Intermittent Failures in Electronic Products. Microelectronics Reliability 48 (2008), 663–674.
135. [135] Qian, Y., Yan, R., Hu, S., Bearing Degradation Evaluation Using Recurrence Quantification Analysis and Kalman Filter. IEEE Transactions on Instrumentation and Measurement 63 (2014), 2599–2610.
136. [136] Rao, G.N., In-service Inspection and Structural Health Monitoring for Safe and Reliable Operation of NPPs. Procedia Engineering 86 (2014), 476–485.
137. [137] Ray, B.C., Rathore, D., Environmental Damage and Degradation of FRP Composites: A Review Report. Polymer Composites 36 (2015), 410–423.
138. [138] Reda, K., Febretti, A., Knoll, A., Aurisano, J., Leigh, J., Johnson, A., et al. Visualizing Large, Heterogeneous Data in Hybrid-reality Environments. IEEE Computer Graphics and Applications 33 (2013), 38–48.
139. [139] Regenbrecht, H., Baratoff, G., Wilke, W., Augmented Reality Projects in the Automotive and Aerospace Industries. IEEE Computer Graphics and Applications 25 (2005), 48–56.
140. [140] Ren, X., Cabaravdic, M., Zhang, X., Kuhlenkötter, B., A Local Process Model for Simulation of Robotic Belt Grinding. International Journal of Machine Tools and Manufacture 47 (2007), 962–970.
141. [141] Romero Rojo, F.J., Development of a Framework for Obsolescence Resolution Cost Estimation. 2011, Cranfield University.
142. [142] Romero Rojo, F.J., Roy, R., Shehab, E., Cheruvu, K., A Study on Obsolescence Resolution Profiles. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 226 (2011), 167–177.
143. [143] Romero Rojo, F.J., Roy, R., Shehab, E., Cheruvu, K., Mason, P., A Cost Estimating Framework for Electronic, Electrical and Electromechanical (EEE) Components Obsolescence Within the Use-oriented Product-service Systems Contracts. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 226 (2011), 154–166.
144. [144] Roy, R., Erkoyuncu, J., Shaw, A., The Future of Maintenance for Industrial Product-Service Systems. Meier, H., (eds.) Product-Service Integration for Sustainable Solutions, 2013, Springer Berlin Heidelberg, 1–15.
145. [145] Sandborn, P., Prabhakar, V., Ahmad, O., Forecasting Electronic Part Procurement Lifetimes to Enable the Management of DMSMS Obsolescence. Microelectronics Reliability 51 (2011), 392–399.
146. [146] Sandborn, P.A., Prabhakar, V.J., The Forecasting and Impact of the Loss of Critical Human Skills Necessary for Supporting Legacy Systems. IEEE Transactions on Engineering Management 62 (2015), 361–371.
147. [147] Schuh, G., Potente, T., Varandani, R., Schmitz, T., Global Footprint Design Based on Genetic Algorithms – An ‘Industry 4.0’ Perspective. CIRP Annals – Manufacturing Technology 63 (2014), 433–436.
148. [148] Schwald, B., de Laval, B., An Augmented Reality System for Training and Assistance to Maintenance in the Industrial Context. 2003.
149. [149] Simonelli, M., Tuck, C., Aboulkhair, N.T., Maskery, I., Ashcroft, I., Wildman, R.D., et al. A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V. Metallurgical and Materials Transactions A 46 (2015), 3842–3851.
150. [150] Smet, V., Forest, F., Huselstein, J.-J., Richardeau, F., Khatir, Z., Lefebvre, S., et al. Ageing and Failure Modes of IGBT Modules in High-Temperature Power Cycling. IEEE Transactions on Industrial Electronics 58 (2011), 4931–4941.
151. [151] Le Son, K., Fouladirad, M., Barros, A., Levrat, E., Iung, B., Remaining Useful Life Estimation Based on Stochastic Deterioration Models: A Comparative Study. Reliability Engineering & System Safety 112 (2013), 165–175.
152. [152] Specht, D., Weiss, S., Spur, G., Model-Based Learning for Diagnostic Tasks. CIRP Annals – Manufacturing Technology 41 (1992), 557–560.
153. [153] Spur, G., Duelen, G., Kirchhoff, U., Held, J., Requirements for Robotics in Handling and Maintenance Functions on Space Platforms. CIRP Annals – Manufacturing Technology 35 (1986), 21–25.
154. [154] Spur, G., Uhlmann, E., Elbing, F., Dry-ice Blasting for Cleaning: Process, Optimization and Application. Wear 233–235 (1999), 402–411.
155. [155] Stark, R., Grosser, H., Beckmann-Dobrev, B., Kind, S., Advanced Technologies in Life Cycle Engineering. Procedia CIRP 22 (2014), 3–14.
156. [156] Stark, R., Grosser, H., Müller, P., Product Analysis Automation for Digital MRO Based on Intelligent 3D Data Acquisition. CIRP Annals – Manufacturing Technology 62 (2013), 123–126.
157. [157] Stoy, K., Brandt, D., Christensen, D.J., Self-reconfigurable Robots: An Introduction. 2010, MIT Press.
158. [158] Suárez-Warden, F., Mendívil, E.G., Ramírez, A.F., García-Lumbreras, S., Profit Model for Incorporating AR Technology in Assembly Tasks of Aeronautical Maintenance. Procedia Computer Science 75 (2015), 113–122.
159. [159] Sun, Y., Giblin, D.J., Kazerounian, K., Accurate Robotic Belt Grinding of Workpieces With Complex Geometries Using Relative Calibration Techniques. Robotics and Computer-Integrated Manufacturing 25 (2009), 204–210.
160. [160] Sun, Y., Hao, M., Statistical Analysis and Optimization of Process Parameters in Ti6Al4V Laser Cladding Using Nd:YAG Laser. Optics and Lasers in Engineering 50 (2012), 985–995.
161. [161] Sutherland, I.E., A Head-mounted Three Dimensional Display. Proc. December 9–11, 1968, Fall Jt. Comput. Conf. Part I – AFIPS '68 (Fall, Part I), 1968, ACM Press, New York, NY, USA, 757.
162. [162] Swingler, J., McBride, J.W., Maul, C., Degradation of Road Tested Automotive Connectors. IEEE Transactions on Components and Packaging Technologies 23 (2000), 157–164.
163. [163] Takata, S., Hiraoka, H., Asama, H., Yamaoka, N., Saito, D., Facility Model for Life-Cycle Maintenance System. CIRP Annals – Manufacturing Technology 44 (1995), 117–121.
164. [164] Takata, S., Inoue, Y., Kohda, T., Hiraoka, H., Asama, H., Maintenance Data Management System. CIRP Annals – Manufacturing Technology 48 (1999), 389–392.
165. [165] Takata, S., Kimura, F., Van Houten, F.J.A.M., Westkämper, E., Shpitalni, M., Ceglarek, D., et al. Maintenance: Changing Role in Life Cycle Management. CIRP Annals – Manufacturing Technology 53 (2004), 643–655.
166. [166] Takata, S., Shiono, H., Hiraoka, H., Asama, H., Case-based Evaluation of Potential Deterioration for Facility Life-Cycle Management. CIRP Annals – Manufacturing Technology 46 (1997), 385–390.
167. [167] Takata, S., Yamada, A., Kohda, T., Asama, H., Life Cycle Simulation Applied to a Robot Manipulator – An Example of Aging Simulation of Manufacturing Facilities. CIRP Annals – Manufacturing Technology 47 (1998), 397–400.
168. [168] Terkaj, W., Tolio, T., Urgo, M., A Virtual Factory Approach for In Situ Simulation to Support Production and Maintenance Planning. CIRP Annals – Manufacturing Technology 64 (2015), 451–454.
169. [169] Thakur, V.K., Kessler, M.R., Self-healing Polymer Nanocomposite Materials: A Review. Polymer (Guildf) 69 (2015), 369–383.
170. [170] Tracht, K., Goch, G., Schuh, P., Sorg, M., Westerkamp, J.F., Failure Probability Prediction Based on Condition Monitoring Data of Wind Energy Systems for Spare Parts Supply. CIRP Annals – Manufacturing Technology 62 (2013), 127–130.
171. [171] Uhlmann, E., Bergmann, A., John, P., et al. Verification of Design Rules for Additive Manufacturing. Proc. Dimens. Accuracy Surf. Finish Addit. Manuf. ASPE Spring Top. Meet. 2014, 2014, 19–23.
172. [172] Uhlmann, E., Bilz, M., Baumgarten, J., MRO-Challenge and Chance for Sustainable Enterprises. Procedia CIRP 11 (2013), 239–244.
173. [173] Uhlmann, E., Hein, C., Bergmann, A., et al. Generative Tool Manufacturing for the Replication of Micro-optical Components. Proc. Dimens. Accuracy Surf. Finish Addit. Manuf. ASPE Spring Top. Meet. 2014, 2014, 201–204.
174. [174] Uhlmann, E., Heitmüller, F., Manthei, M., Reinkober, S., Applicability of Industrial Robots for Machining and Repair Processes. Procedia CIRP 11 (2013), 234–238.
175. [175] Uhlmann, E., König-Urban, K., Rethmeier, M., et al. Ersatzteilfertigung und Reparatur mittels additiver Fertigungsverfahren. Fachmesse Und Anwendertagung Für Rapid-Technologie 2013, 2013.
176. [176] Uhlmann, E., Motschmann, S., Bilz, M., Schöfisch, K., Um die Ecke gebracht – Schonende Umlenkung von Trockeneis-Strahlmittel. Tagungsband 6. Berliner Runde – Neue Konzepte für Werkzeugmaschinen, 2011 S.165-172, ISBN: 978-3-9814405-2-2.
177. [177] Uhlmann, E., Urban, K., Markt- und Trendstudie 2010: Laserstrahlschmelzen in generativer Fertigung. 2011.
178. [178] Uhlmann, E., Urban, K., Licht: Werkzeug mit Potential. 6. Berliner Runde – Neue Konzepte Für Werkzeugmaschinen 2011, Begleit, 2011, 173–183.
179. [179] Uhlmann, E., Krause, F.-L., Dreher, S., Elsner, P., Frost, T., Development of a Process Control Strategy for Selective Laser Sintering. Production Engineering. Research and Development in Germany. Annals of the German Academic Society for Production Engineering 6 (1999), 43–46.
180. [180] UNIDO, Emerging Trends in Global Manufacturing Industries. 2013.
181. [181] Vavilov, V.P., Burleigh, D.D., Review of Pulsed Thermal NDT: Physical Principles, Theory and Data Processing. NDT and E International 73 (2015), 28–52.
182. [182] Verl, A., Heisel, U., Walther, M., Maier, D., Sensorless Automated Condition Monitoring for the Control of the Predictive Maintenance of Machine Tools. CIRP Annals – Manufacturing Technology 58 (2009), 375–378.
183. [183] Voisin, A., Levrat, E., Cocheteux, P., Iung, B., Generic Prognosis Model for Proactive maintenance Decision Support: Application to Pre-industrial e-Maintenance Test Bed. Journal of Intelligent Manufacturing 21 (2008), 177–193.
184. [184] de Vos, J.I.A., van Dongen, L.A.M., Performance Centered Maintenance as a Core Policy in Strategic Maintenance Control. Procedia CIRP 38 (2015), 255–258.
185. [185] Wang, F., Williams, S., Colegrove, P., Antonysamy, A.A., Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V. Metallurgical and Materials Transactions A 44 (2012), 968–977.
186. [186] Wang, J., Gao, R.X., Yan, R., Multi-scale Enveloping Order Spectrogram for Rotating Machine Health Diagnosis. Mechanical Systems and Signal Processing 46 (2014), 28–44.
187. [187] Wang, P., Gao, R.X., Fan, Z., Cloud Computing for Cloud Manufacturing: Benefits and Limitations. Journal of Manufacturing Science and Engineering, 137, 2015, 044002.
188. [188] Waugh, R.C., Development of Infrared Techniques for Practical Defect Identification in Bonded Joints. 2016, Springer International Publishing, Cham.
189. [189] Webel, S., Bockholt, U., Engelke, T., Gavish, N., Olbrich, M., Preusche, C., An Augmented Reality Training Platform for Assembly and Maintenance Skills. Robotics and Autonomous Systems 61 (2013), 398–403.
190. [190] Wiendahl, H.-P., Thies, J.M., Zeugträger, K., Construction and Start-Up of Complex Assembly Systems. CIRP Annals – Manufacturing Technology 45 (1996), 17–21.
191. [191] Wu, Y., Breaz, E., Gao, F., Miraoui, A., A Modified Relevance Vector Machine for PEM Fuel Cell Stack Aging Prediction. 2015 IEEE Ind. Appl. Soc. Annu. Meet., IEEE, 2015, 1–8.
192. [192] Xia, M., Li, T., Zhang, Y., de Silva, C.W., Closed-loop Design Evolution of Engineering System Using Condition Monitoring Through Internet of Things and Cloud Computing. Computer Networks, 2016.
193. [193] Xiong, X., Wu, Y.-L., Jone, W.-B., Material Fatigue and Reliability of MEMS Accelerometers. 2008 IEEE Int. Symp. Defect Fault Toler. VLSI Syst., 2008, IEEE, 314–322.
194. [194] Xu, X., Chen, T., Minami, M., Intelligent Fault Prediction System Based on Internet of Things. Computers & Mathematics with Applications 64 (2012), 833–839.
195. [195] Yokoyama, A., Innovative Changes for Maintenance of Railway by Using ICT-To Achieve ‘Smart Maintenance’. Procedia CIRP 38 (2015), 24–29.
196. [196] Zalameda, J.N., Burke, E.R., Horne, M.R., Bly, J.B., Real Time Fatigue Damage Growth Assessment of a Composite Three-Stringer Panel Using Passive Thermography. (Tony) Hsieh, S.-J., Zalameda, J.N., (eds.) SPIE Sens. Technol. + Appl. 948502, 2015, International Society for Optics and Photonics.
197. [197] Zhang, L., Wang, Q., Tian, B., Security Threats and Measures for the Cyber-Physical Systems. Journal of China Universities of Posts and Telecommunications 20 (2013), 25–29.
198. [198] Zheng, L., Terpenny, J., Sandborn, P., Design Refresh Planning Models for Managing Obsolescence. IIE Transactions 47 (2015), 1407–1423.
199. [199] Zhou, J.M., Yang, J., Wan, Q., Review on Non-Destructive Testing Technique of Eddy Current Pulsed Thermography. Applied Mechanics and Materials 742 (2015), 128–131.
200. [200] Zhu, J., Ong, S.K., Nee, A.Y.C., A Context-Aware Augmented Reality Assisted Maintenance System. International Journal of Computer Integrated Manufacturing 28 (2014), 213–225.
201. [201] Zijm, W.H.M., Reengineering Production Systems: The Royal Netherlands Naval Dockyard. CIRP Annals – Manufacturing Technology 45 (1996), 427–432.
202. [202] Zuccolotto, M., Pereira, C.E., Fasanotti, L., Cavalieri, S., Lee, J., Designing an Artificial Immune Systems for Intelligent Maintenance Systems. IFAC-PapersOnLine 48 (2015), 1451–1456.