Integrating through-life engineering service knowledge with product design and manufacture

International Journal of Computer Integrated Manufacturing

Volumn 28, Issue 1, 2015, Pages 59-74

  Masood, Tariq ^a,b   Roy, Rajkumar ^a   Harrison, Andrew ^b   Xu, Yuchun ^a   Gregson, Stephen ^b   Reeve, Carl ^b  

^a CRANFIELD UNIVERSITY   (United Kingdom)

^b ROLLS ROYCE PLC   (United Kingdom)

Author keywords

design for service; digital feedback; manufacturing; product design; through life engineering service knowledge

Indexed keywords

KNOWLEDGE MANAGEMENT; LIFE CYCLE; MANUFACTURE;

DESIGN FOR SERVICES; DIGITAL FEEDBACK; ENGINEERING SERVICE; LITERATURE REVIEWS; LOOP MODELING; PRODUCT DESIGN AND MANUFACTURES; PRODUCT LIFE CYCLES; RESEARCH GAPS;

PRODUCT DESIGN;

EID: 84911435479     PISSN: 0951192X     EISSN: 13623052     Source Type: Journal    
DOI: 10.1080/0951192X.2014.900858     Document Type: Conference Paper

References (73)

1. Ackoff, R. L. 1989. " From Data to Wisdom." Journal of Applied Systems Analysis 16 (1): 3-9.
2. Alavi, M., and, D. E. Leidner. 2001. " Review: Knowledge Management and Knowledge Management Systems: Conceptual Foundations and Research Issues." MIS Quarterly 25 (1): 107-136. doi: 10.2307/3250961.
3. Annamalai, G., R. Hussain, M. Cakkol, R. Roy, S. Evans, and, A. Tiwari. 2011. " An Ontology for Product-Service Systems." In Functional Thinking for Value Creation, edited by J. Hesselbach and C. Herrmann., 231-236. Berlin: Springer.
4. Aurich, J. C., C. Fuchs, and, C. Wagenknecht. 2006. Life Cycle Oriented Design of Technical Product-Service Systems. Journal of Cleaner Production 14 (17): 1480-1494. doi: 10.1016/j.jclepro.2006.01.019
5. Baxter, D., J. Gao, K. Case, J. Harding, B. Young, S. Cochrane, and, S. Dani. 2008. " A Framework to Integrate Design Knowledge Reuse and Requirements Management in Engineering Design." Robotics and Computer-Integrated Manufacturing 24 (4): 585-593. doi: 10.1016/j.rcim.2007.07.010.
6. Baxter, D., R. Roy, A. Doultsinou, J. Gao, and, M. Kalta. 2009. " A Knowledge Management Framework to Support Product-Service Systems Design." International Journal of Computer Integrated Manufacturing 22 (12): 1073-1088. doi: 10.1080/09511920903207464.
7. Baxter, D., R. Roy, and, J. Gao. 2009. " Managing Knowledge within the Manufacturing Enterprise: An Overview." International Journal of Manufacturing Technology and Management 18 (2): 183-209. doi: 10.1504/IJMTM.2009.026193.
8. Boothroyd, G., P. Dewhurst, and, W. A. Knight. 2002. Product Design for Manufacture and Assembly, 2nd Edition. New York: M. Dekker.
9. Bracewell, R., M. Gourtovaia, K. Wallace, and, J. Clarkson. 2007. "Extending Design Rationale to Capture an Integrated Design Information Space." International Conference on Engineering Design (ICED07), Paris, August 28-31.
10. Bracewell, R., M. Gourtovaia, M. Moss, D. Knott, K. Wallace, and, J. Clarkson. 2007. " DRED 2.0: A Method and Tool for Capture and Communication of Design Knowledge Deliberated in the Creation of Technical Products." International Conference on Engineering Design (ICED09), Stanford, CA, August 24-27, 2009.
11. Cambridge Service Alliance. 2012. "KT-Box Final Report." University of Cambridge, November.
12. Chryssolouris, G., S. Markis, D. Mourtzis, and, N. Papakostas. 2008. " Knowledge Management in a Virtual Enterprise-Web Based Systems for Electronics Manufacturing." In Methods and Tools for Effective Knowledge Life-Cycle-Management, edited by A. Bernard and S. Tichkiewitch., 107-126. Berlin: Springer. http://www.springer.com/engineering/mechanical3-540-78430-2
13. Chryssolouris, G., D. Mourtzis, N. Papakostas, Z. Papachatzakis, and, S. Xeromerites. 2008. " Knowledge Management Paradigms in Selected Manufacturing Case Studies." In Methods and Tools for Effective Knowledge Life-Cycle-Management, edited by A. Bernard and S. Tichkiewitch., 521-532. Berlin: Springer. http://www.springer.com/engineering/mechanical3-540-78430-2
14. Doultsinou, A. 2010. "Service Knowledge Capture and Re-use to Support Product Design." PhD Thesis, Cranfield University, Cranfield, 377.
15. Engineering Design Centre. 2013. "Research Projects of Engineering Design Centre." University of Cambridge. Accessed October 30, 2011. http://www-edc.eng.cam.ac.uk
16. Engineering Design Centre. 2014. "Integrated Products and Services (IPAS)." University of Cambridge. Accessed March 20, 2014. http://www-edc.eng.cam.ac.uk/ipas/
17. EPSRC. 2013. "EPSRC Funded Research Projects." Accessed November 15, 2013. http://www.epsrc.ac.uk
18. Forrester, J. W. 1961. Industrial Dynamics. Cambridge, MA: MIT Press.
19. Galup, S. D., R. Dattero, and, R. C. Hicks. 2003. " The Enterprise Knowledge Dictionary." Knowledge Management Research & Practice 1 (2): 95-101. doi: 10.1057/palgrave.kmrp.8500013.
20. Garud, R., and, A. Kumaraswamy. 2005. " Vicious and Virtuous Circles in the Management of Knowledge: The Case of Infosys Technologies." MIS Quarterly 29 (1): 9-33.
21. Gruber, T. R. 1995. " Toward Principles for the Design of Ontologies Used for Knowledge Sharing? " International Journal of Human and Computer Studies 43: 907-928. doi: 10.1006/ijhc.1995.1081.
22. Han, K. H., and, J. W. Park. 2009. " Process-Centered Knowledge Model and Enterprise Ontology for the Development of Knowledge Management System." Expert Systems with Applications 36 (4): 7441-7447. doi: 10.1016/j.eswa.2008.09.031.
23. Harrison, A. 2006. "Design for Service: Harmonising Product Design With a Service Strategy." ASME Turbo Expo 2006: Power for Land, Sea, and Air (GT2006), American Society of Mechanical Engineers, Barcelona, May 8-11, 135-143. ISBN: 0-7918-4237-1.
24. Hey, J. 2004. "The Data, Information, Knowledge, Wisdom Chain: The Metaphorical Link." Relatório Técnico, Intergovernmental Oceanographic Commission, (UNESCO).
25. Holsapple, C. W., and, M. Singh. 2001. " The Knowledge Chain Model: Activities for Competitiveness." Expert Systems with Applications 20 (1): 77-98. doi: 10.1016/S0957-4174(00)00050-6.
26. Jagtap, S., A. Johnson, M. Aurisicchio, and, K. Wallace. 2007. "In-Service Information Required by Engineering Designers." 16th International Conference on Engineering Design (ICED07), Paris, August 28-31. The Design Society.
27. Jones, J., and, J. Hayes. 1997. " Use of a Field Failure Database for Improvement of Product Reliability." Reliability Engineering & System Safety 55 (2): 131-134. doi: 10.1016/S0951-8320(96)00088-9.
28. Kabilan, V. 2007. "Ontology for Information Systems (O4IS) Design Methodology." PhD Thesis, The Royal Institute of Technology, Stockholm.
29. Kamponpan, L. 2007. "Service Supply Chains." MSc Thesis, Cranfield University, Cranfield.
30. Liang, T.-P. 2002. Theory and Practice of Electronic Commerce. Taipei: Hwa-Tai.
31. Lovatt, A. M., and, H. R. Shercliff. 1998. " Manufacturing Process Selection in Engineering Design Part 1: The Role of Process Selection." Materials and Design 19: 205-215. doi: 10.1016/S0261-3069(98)00038-7.
32. Ma, W. 2005. "Factors Affecting Knowledge Reuse: A Framework For Study." MSc Thesis, National Sun Yat-sen University, Taiwan.
33. Malhotra, Y. 2001. " Expert Systems for Knowledge Management: Crossing the Chasm between Information Processing and Sense Making." Expert Systems with Applications 20 (1): 7-16. doi: 10.1016/S0957-4174(00)00045-2.
34. Markus, M. L. 2001. " Toward a Theory of Knowledge Reuse: Types of Knowledge Reuse Situations and Factors in Reuse Success." Journal of Management Information Systems 18 (1): 57-93.
35. Masood, T. 2009. "Enhanced Integrated Modelling Approach to Reconfiguring Manufacturing Enterprises." PhD Thesis, Loughborough University, Loughborough, 314.
36. Masood, T., J. A. Erkoyuncu, R. Roy, and, A. Harrison. 2011. "A Digital Decision Making Framework Integrating Design Attributes, Knowledge and Uncertainty in Aerospace Sector." 7th International Conference on Digital Enterprise Technology (DET), Athens, September 28-30, 458-466.
37. Masood, T., J. A. Erkoyuncu, R. Roy, and, A. Harrison. 2014. " Integrating Design Attributes, Knowledge and Uncertainty in Aerospace Sector." CIRP Journal of Manufacturing Science and Technology, 7 (2), 83-96. doi: 10.1016/j.cirpj.2014.02.001.
38. Masood, T., R. Roy, A. Harrison, and, Y. Xu. 2011. "Service Knowledge Feedback to Product Design: Recent Advances, Challenges and Future Trends." Cranfield University & Rolls-Royce, Not submitted journal article, 1-31.
39. Masood, T., and, R. Weston. 2011. " An Integrated Modelling Approach in Support of Next Generation Reconfigurable Manufacturing Systems." International Journal of Computer Aided Engineering and Technology 3 (3-4): 372-398. doi: 10.1504/IJCAET.2011.040054.
40. Masood, T., R. Weston, and, A. Rahimifard. 2010. " A Computer Integrated Unified Modelling Approach to Responsive Manufacturing." International Journal of Industrial and Systems Engineering 5 (3): 287-312. doi: 10.1504/IJISE.2010.031962.
41. Meier, H., R. Roy, and, G. Seliger. 2010. " Industrial Product-Service Systems-Ips2." CIRP Annals-Manufacturing Technology 59 (2): 607-627. doi: 10.1016/j.cirp.2010.05.004.
42. Mont, O. K. 2002. " Clarifying the Concept of Product-Service System." Journal of Cleaner Production 10 (3): 237-245. doi: 10.1016/S0959-6526(01)00039-7.
43. Mountney, S. L. 2009. "Acquisition and Sharing of Innovative Manufacturing Knowledge for Preliminary Design." PhD Thesis, Cranfield University, Cranfield.
44. Neches, R., R. Fikes, T. Finin, T. Gruber, R. Patil, T. Senator, and, W. R. Swartout. 1991. "Enabling Technology for Knowledge Sharing. " AI Magazine 12 (3): 36-56.
45. Neely, A. 2008. " Exploring the Financial Consequences of the Servitization of Manufacturing." Operations Management Research 1 (2): 103-118. doi: 10.1007/s12063-009-0015-5.
46. Nonaka, I. 1994. " A Dynamic Theory of Organizational Knowledge Creation." Organization Science 5 (1): 14-37. doi: 10.1287/orsc.5.1.14.
47. Norman, D. 1988. " Incorporating Operational Experience and Design Changes in Availability Forecasts." Reliability Engineering and System Safety 20: 245-261. doi: 10.1016/0951-8320(88)90056-7.
48. Nowack, M. L. 1997. "Design Guideline Support for Manufacturability." PhD Thesis, University of Cambridge, Cambridge.
49. Noy, N. F., and, D. L. McGuinness. 2001. "Ontology Development 101: A Guide to Creating Your First Ontology." Accessed 2010. http://www.ksl.stanford.edu/people/dlm/papers/ontology101/ontology101-noy-mcguinness.html
50. Nunes, V. T., F. M. Santoro, and, M. R. Borges. 2009. " A Context-Based Model for Knowledge Management Embodied in Work Processes." Information Sciences 179 (15): 2538-2554. doi: 10.1016/j.ins.2009.01.033.
51. Papakostas, N., K. Efthymiou, G. Chryssolouris, S. Stanev, J. Ovtcharova, K. Schafer, R.-P. Conrad, and, A. Eytan. 2010. "Assembly Process Templates for the Automotive Industry." 3rd CIRP Conference on Assembly Technologies and Systems (CATS 10), Trondheim, June 1-3, 151-156. http://www.ntnu.edu/ipk/cats2010
52. Papakostas, N., P. Papachatzakis, V. Xanthakis, D. Mourtzis, and, G. Chryssolouris. 2010. " An Approach to Operational Aircraft Maintenance Planning." International Journal of Decision Support Systems 48 (4): 604-612. doi: 10.1016/j.dss.2009.11.010.
53. Petkova, V. T. 2003. "An analysis of field feedback in consumer electronics industry." PhD Thesis, Eindhoven University of Technology, Eindhoven.
54. Rolls-Royce. 2014a. "Strategic Investment in Low-carbon Engine Technology (SILOET) Programme." Accessed March 20, 2014. http://www.rolls-royce.com/about/technology/research-programmes/gas-turbine-programmes/siloet.jsp
55. Rolls-Royce. 2014b. "Strategic Affordable Manufacturing in the UK through Leading Environmental Technologies (SAMULET) Programme." Accessed March 20, 2014. http://www.rolls-royce.com/about/technology/research-programmes/manufacturing-technologies/index.jsp
56. Roy, R., and, K. S. Cheruvu. 2009. " A Competitive Framework for Industrial Product-Service Systems." International Journal of Internet Manufacturing and Services 2 (1): 4-29. doi: 10.1504/IJIMS.2009.031337.
57. Semy, S. K., M. K. Pulvermacher, and, L. J. Obrst. 2004. Toward the Use of An Upper Ontology for US Government and US Military Domains: An Evaluation, 1-43. Bedford, MA: Mitre Corporation.
58. Sobodu, O. 2002. Knowledge Capture and Representation in Design and Manufacture." MSc Thesis, Cranfield University, Cranfield.
59. Sterman, J. D. 2000. Business Dynamics: Systems Thinking and Modelling for A Complex World. McGraw-Hill. http://www.mcgraw-hill.co.uk/html/0071179895.html
60. Tang, L., Y. Zhao, S. Austin, M. Darlington, and, S. Culley. 2010. " Codification Vs Personalisation: A Study of the Information Evaluation Practice between Aerospace and Construction Industries." International Journal of Information Management 30 (4): 315-325. doi: 10.1016/j.ijinfomgt.2009.11.009.
61. Technology Strategy Board. 2013. "Research Projects Funded by Technology Strategy Board." Accessed November 15, 2013. https://www.innovateuk.org
62. Ternero, M. C. R. 2006. "HIPARSYS Project: State of the Art." University of Southampton, March 26. Accessed March 20, 2014. http://www.dte.us.es/personal/mcromero/publicaciones/electronicas/hiparsys.pdf
63. United Nations. 2002. "Manual on Statistics of International Trade in Services." United Nations Publications, New York, 1-190, Accessed October 30, 2011. http://www.oecd.org/dataoecd/32/45/2404428.pdf
64. University of Southampton. 2013. "HYPARSIS: High Performance and Robust Systems." University of Southampton. Accessed November 15, 2013. http://hiparsys.ecs.soton.ac.uk
65. Uschold, M., and, M. Gruninger. 1996. "Ontologies: Principles, Methods and Applications." The Knowledge Engineering Review 11 (2): 93-136.
66. Viles, E., D. Puente, M. J. Alvarez, and, F. Alonso. 2007. " Improving the Corrective Maintenance of An Electronic System for Trains." Journal of Quality in Maintenance Engineering 13 (1): 75-87. doi: 10.1108/13552510710735131.
67. Weise, R. H. 1996. Representing the Corporation: Strategies for Legal Counsel. USA: Aspen Law & Business Publishers.
68. Wilson, T. D. 2002. " The Nonsense of Knowledge Management." Information Research 8 (1). http://www.informationr.net/ir/8-1/paper144.html
69. Wong, S. C., R. M. Crowder, G. B. Wills, and, N. R. Shadbolt. 2007. "Informing Preliminary Design by Incorporating Service Knowledge." International Conference on Engineering Design (ICED), Paris, August 28-31.
70. X-Media Consortium. 2014. "Large Scale Knowledge Sharing and Reuse across Media (X-Media)." Accessed March 20, 2014. http://www.x-media-project.org
71. Young, B., A. F. Cutting-Decelle, D. Guerra, G. Gunendran, B. Das, and, S. Cochrane. 2005. Sharing Manufacturing Information and Knowledge in Design Decision and Support. Advances in Integrated Design and Manufacturing in Mechanical Engineering 173-185. doi: 10.1007/1-4020-3482-2-14.
72. Zeithaml, V. A., A. Parasuraman, and, A. Malhotra. 2002. " Service Quality Delivery through Web Sites: A Critical Review of Extant Knowledge." Journal of the Academy of Marketing Science 30 (4): 362-375. doi: 10.1177/009207002236911.
73. Zhen, M., T. Masood, A. Rahimifard, and, R. Weston. 2009. " A Structured Modelling Approach to Simulating Dynamic Behaviours in Complex Organisations." Production Planning & Control: The Management of Operations 20 (6): 496-509. doi: 10.1080/09537280902938597.