Maintenance: Changing role in life cycle management

CIRP Annals - Manufacturing Technology

Volumn 53, Issue 2, 2004, Pages 643-655

  Takata, S ^a   Kimura, F ^b   Van Houten, F J A M ^c   Westkamper E ^d   Shpitalni, M ^e   Ceglarek, D ^f   Lee, J ^g  

^a WASEDA UNIVERSITY   (Japan)

^b UNIVERSITY OF TOKYO   (Japan)

^c UNIVERSITY OF TWENTE   (Netherlands)

^d FRAUNHOFER INSTITUTE FOR MANUFACTURING ENGINEERING AND AUTOMATION IPA   (Germany)

^e TECHNION ISRAEL INSTITUTE OF TECHNOLOGY   (Israel)

^f UNIVERSITY OF WISCONSIN MADISON   (United States)

^g UNIVERSITY OF WISCONSIN MILWAUKEE   (United States)

Author keywords

Life Cycle Management; Maintenance

Indexed keywords

COST EFFECTIVENESS; DATA TRANSFER; ENERGY UTILIZATION; ENVIRONMENTAL IMPACT; LIFE CYCLE; NATURAL RESOURCES; PROBLEM SOLVING; PRODUCT DESIGN; PROJECT MANAGEMENT; RISK ASSESSMENT; SUSTAINABLE DEVELOPMENT; WORLD WIDE WEB;

CLOSED-LOOP MANUFACTURING; ENERGY RECOVERY; LIFE CYCLE MANAGEMENT; PRODUCT REUSE;

MAINTENANCE;

EID: 12144278408     PISSN: 00078506     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0007-8506(07)60033-X     Document Type: Article

References (83)

1. Kimura, F., Suzuki H., 1995, Product Life Cycle Modelling for Inverse Manufacturing, Life-Cycle Modelling for Innovative Products and Processes, Chapman & Hall: 80-89.
2. Tani, T., 1999, Product Development and Recycle System for Closed Substance Cycle Society, Proc. of Environmentally conscious design and inverse manufacturing: 294-299.
3. Nowlan, F.S., Heap H.F., 1978, Reliability-Centered Maintenance, Proc. of Annual Reliability and Maintainability Symposium: 38.
4. ASME, 1994, Risk-based Inspection - Development of Guidelines, Vol.3 Fossil Fuel-fired Electric Power Generating Station Applications, ASME Research Report, CRTD-Vol.20-3.
5. Keller, E, 2003, Customer Support: Delivering Enhanced Services through Intelligent Device Management, Service Business Magazine, Nov/Dec.
6. Seliger, G., Buchholz, A., Grudzien, W., 2002, Multiple Usage Phases by Component Adaptation, in: Proceedings of the 9th CIRP International Seminar on Life Cycle Engineering, Erlangen: 47-54.
7. DeSimone, L. D., Popoff, F. with The WBCSD, 1997, Eco-Efficiency, MIT Press.
8. Takata, S., 1999, Life Cycle Maintenance Management, Computer-Aided Maintenance, edited by Lee, J., Wang, B., Kluwer Academic Pub.: 209-230.
9. Russomanno, D. J., Bonnell, R. D., Bowles, J. B., 1994, Viewing Computer-Aided Failure Modes and Effects Analysis from an Artificial Intelligence Perspective, Integrated Computer-Aided Engineering, vol.1, no.3: 209-228.
10. Kimura, F., Hata, T., Kobayashi, N., 2002, Reliability-Centered Maintenance Planning based on Computer-Aided FMEA, Proc. of the 35th CIRP-International Seminar on Manufacturing Systems: 506-511.
11. Boothroyd, G., Dewhurst, P., 1983, Design for assembly: A Designer's Handbook, Boothroyd Dewhurst Inc., Wakerfield, Rhode Island.
12. Ohashi, T., Iwata, M., Arimoto, S., Miyakawa, S., 2002, Extended Assemblability Evaluation Method (AEM), JSME International Journal, Series C., vol. 45, no. 2: 567-574.
13. Gershenson, J., Ishii, K., 1992, Design for Serviceability, Concurrent Engineering: Theory and Practice, Kusiak, A. (ed.), John Wiley, New York: 19-39.
14. Di Marco, P., Eubanks, C., Ishii, K., 1995, Service Modes and Effects Analysis: Integration of Failure Analysis and Serviceability Design, Computers in Engineering, VOL COM: 833-840.
15. de Boer, R.J., Zijm, W.H.M., 1997, A decision support system for ship maintenance capacity planning, Annals of the CIRP, vol.46/1: 391-396.
16. 2000, Risk-Based Inspection, Base Document, API Publication 581.
17. Engels-Lindemann, M., Sihn, W., 2002, Risk-based maintenance budgeting, Manufacturing Engineering, vol. 81, no. 4: 162-164.
18. Suh, J., Kumara, S.R.T., Mysore, S.P., 1999, Machinery fault diagnosis and prognosis: applications of advanced signal processing techniques, Annals of the CIRP, vol.48/1: 317-320.
19. Majstorovic, V.D., 2003, Expert Systems for Diagnosis and Maintenance: The State-of-the-Art, Research Report, No. 24/03, Mechanical Engineering Faculty, Belgrade: 1-21.
20. Hirschmann, J., 2002, Fault detection and diagnosis of the electromechanical drive units the automation technology, Managing Innovative Manufacturing (MiM 2002) Conference Proceedings: 179-181.
21. Chen, L., Bender, P., Renton, P., El-Wardany, T., 2002, Integrated Virtual Manufacturing Systems for Process Optimisation and Monitoring, Annals of the CIRP, vol.51/1: 409-412.
22. Feldmann, K., Goeringer, J., 2001, Internet based Diagnosis of Assembly Systems, Annals of the CIRP, vol.50/1:5-8.
23. Zhou, Z.D., Chen, Y.P., Fun, J.Y.H., Nee, A.Y.C., 2000, Integrated condition monitoring and fault diagnosis for modern manufacturing systems, Annals of the CIRP, vol.49/1: 387-390.
24. Jedrzejewski, J., Kwasny, W., 1996, Artificial intelligence tools in diagnostics of machine tool drives, Annals of the CIRP, vol.45/1: 411-414.
25. Kumara, S.R.T., Lee, J.W., 1995, Intelligent integrated diagnostics: development of the diagnostics system for online quality control of powder injection molding, Annals of the CIRP, vol.44/1: 393-398.
26. Ceglarek, D., Shi, J., Wu, S.M., 1994, A Knowledge-Based Diagnostic Approach for the Launch of the Auto-Body Assembly Process, Journal of Engineering for Industry, vol.116, no.4: 491-499.
27. Monostori, L., Bartal, P., Zsoldos, L., 1990, Concept of a knowledge based diagnostic system for machine tools and manufacturing cells, Computers in Industry, vol. 15, no.1/2: 95-102.
28. Monostori, L., 1993, A step towards intelligent manufacturing: modelling and monitoring of manufacturing processes through artificial neural networks, Annals of the CIRP, vol.42/1: 485-488.
29. Monostori, L., 1995, Hybrid Al approaches for supervision and control of manufacturing processes, Proc. of the AC'95, IV International Conference on Monitoring and Automation Supervision in Manufacturing, 37-47.
30. Monostori, L., Markus, A., Van Brussel, H., Westkämper, E., 1996, Machine learning approaches to manufacturing, Annals of the CIRP, vol. 45/2: 675-712.
31. El-Maraghy, H.A., Syed, A., Chu, H., El-Maraghy, W.H., 1993, A 2-D mapping approach for monitoring and diagnosing the execution of robotic assembly tasks, Annals of the CIRP, vol.42/1: 9-12.
32. Specht, D., Weiss, S., 1992, Model-based learning for diagnostic tasks, Annals of the CIRP, vol.41/1: 557-560.
33. Spiewak, S., 1991, A predictive monitoring and diagnosis system for manufacturing, Annals of the CIRP, vol.40/1: 401-404.
34. Jaume, D., Verge, M., Rault, 1990, A model based diagnosis in machine tools: application to the milling cutting process, Annals of the CIRP, vol.39/1: 443-446.
35. Seliger, G., Bollmann, O., Kaase, W., 1990, Knowledge-Based Diagnosis in Flexible Automated Assembly, Annals of the CIRP, vol.39/1: 9-14.
36. Majstorovic, V., Milacic, V., 1989, An expert system for diagnosis and maintenance in FMS, Annals of the CIRP, vol.38/1: 489-492.
37. Asama, H., Yoshikawa, H., Mikami, T., Shiroiwa, T., 1986, Development of a 9 DoF Articulated Manipulator for Maintenance, Bulletin of the Japan Society of Precision Engineering, vol.20, no.1: 47-48.
38. Spur, G., Duelen, G., Kirchhoff, U., Hels, J., 1986, Requirements for robotics in handling and maintenance functions on space platforms, Annals of the CIRP, vol.35/1: 21-25.
39. Rust, H., Schreck, G., Leister, P., 1998, SOLIST - A Lightweight Climbing Robot with Highly Flexible Kinematics, CLAWAR'98: 193-196.
40. Seliger, G., Basdere, B., Keil, T., Rebafka, U., 2002, Innovative Processes and Tools for Disassembly, Annals of the CIRP Vol. 51/1: 37-40.
41. Westkaemper, E., Niemann, J., 2002, Strategic considerations to boost utilization performance of manufacturing systems, 6th International Conference on Engineering Design and Automation / CD-ROM: 80-85.
42. Westkaemper, E., von der Osten-Sacken, D., 1998, Product Life Cycle Costing Applied to Manufacturing Systems, Annals of the CIRP, vol.47/1: 353-356.
43. Westkaemper, E., von der Osten-Sacken, D, 2000, The Method of Life Cycle Costing Applied to Manufacturing Systems, Production Engineering 7, Nr. 1: 135-138.
44. Ueda, K., Nishino, S., Oda, H., 2003, Integration of Economics into Engineering with an Application to the Recycling Market, Annals of the CIRP, Vol.52/1: 33-36.
45. Takata, S., Hiraoka, H., Asama, H., Yamaoka, N., Saito, D., 1995, Facility Model for Life-Cycle Maintenance System, Annals of the CIRP, Vol.44/1: 117-121.
46. Takata, S., Inoue, Y., Kohda, T., Hiraoka, H., Asama, H., 1999, Maintenance Data Management System, Annals of the CIRP, Vol.48/1: 389-392.
47. van Houten, F.J.A.M., Tomiyama, T., Salomons, O.W., 1998, Product Modelling for Model-based Maintenance, Annals of the CIRP, vol.47/1: 123-128.
48. van Houten, F.J.A.M., Kimura, F., 2000, The Virtual Maintenance System: a Computer-based Support Tool for Robust Design, Product Monitoring, Fault Diagnosis and Maintenance Planning, Annals of the CIRP, vol.49/1: 91-94.
49. Umeda, Y., Sato, T., Tomiyama, T., Yoshikawa H., 1989, Model Based Diagnosis Using Qualitative Reasoning, in Kimura, F., and Rolstadas A. (eds.): Computer Applications in Production and Engineering, Proc. of the Third International IFIP Conference on Computer Applications in Production and Engineering (CAPE '89), 443-450.
50. Shimomura, Y., Tanigawa, S., Umeda, Y., Tomiyama, T., 1995, Development of Self-Maintenance Photocopiers, Al Magazine, vol. 16, no. 4: 41-53.
51. Umeda, Y., Ishii, M., Shimomura, Y., and Tomiyama, T., 1996, Supporting Conceptual Design Based on the Function-Behavior-State Modeler, Artificial intelligence for engineering design, analysis and manufacturing: Al EDAM. 10, no. 4: 275-288.
52. Takata, S., Yamada, A., Kohda, T., Asama, H., 1998, Life Cycle Simulation Applied to a Robot Manipulator -An Example of Aging Simulation of Manufacturing Facilities-, Annals of the CIRP, Vol.47/1: 397-400.
53. Yamada, A., Takata, S., 2002, Reliability Improvement of Industrial Robots by Optimizing Operation Plans Based on Deterioration Evaluation, Annals of the CIRP, vol.51/1: 319-322.
54. Flaig, T., 1998, Virtual Environment for Education and Training in Safety Engineering and Maintenance, Virtual Environments, 270-279.
55. Lu, S. C-Y., Shpitalni, M., Bar-Or, R., Gadh, R., 1999, Virtual and Augmented Reality Technologies for Product Realization, Annals of the CIRP, 48/2: 471-495.
56. Lipson, H., Shpitalni, M., Kimura, F., Goncharenko, I., 1998, Online Product Maintenance by Web-Based Augmented Reality, CIRP Seminar STC Design: New Tools and Workflows for Product Development, 131-143.
57. Shpitalni, M., Kimura, F., Goncharenko, I., Kato, S., Lipson, H., 1998, Total Maintenance: Scope and Tools, CIRP Seminar STC Design: New Tools and Workflows for Product Development, 81-92.
58. Takata, S., Isobe, H., Fujii, H., 2001, Disassembly Operation Support System with Motion Monitoring of a Human Operator, Annals of the CIRP, Vol.50/1: 305-308.
59. Kobayashi, H., 2001, Life-cycle Planning for Strategic Evolution of Eco-products, Int. Conf. on Engineering Design (ICED01): 757-764.
60. Kimura, F., Hata, T., 2003, Life Cycle Design and Management based on Simulation of Service Quality Variation, Proc. of CIRP Seminar on Life Cycle Engineering: 80-88.
61. Ceglarek, D., Shi, J., 1996, Fixture Failure Diagnosis for Autobody Assembly Using Pattern Recognition, Journal of Engineering for Industry, vol. 118: 55-66.
62. Jin, J., Shi, J., 1999, State Space Modeling of Sheet Metal Assembly for Dimensional Control, ASME Transactions, Journal of Manufacturing Science and Engineering, vol. 121, no.4: 756-762.
63. Ding, Y., Jin, J., Ceglarek, D., Shi, J., 2000, Process-Oriented Tolerance Synthesis for Multistage Manufacturing Systems, Manufacturing Science and Engineering, ASME MED, vol.11: 15-22.
64. Ding, Y., Ceglarek, D., Shi, J., 2002, Fault Diagnosis of Multistage Manufacturing Processes by Using State Space Approach, Journal of Manufacturing Science and Engineering, vol.124, no.2: 313-322.
65. Ding, Y., Shi, J., Ceglarek, D., 2002, Diagnosability Analysis of Multi-Station Manufacturing Processes, Journal of Dynamic Systems, Measurement, and Control, vol.124, no.1: 1-13.
66. Rong, Q., Ceglarek, D., Shi, J., 2000, Dimensional Fault Diagnosis for Compliant Beam Structure Assemblies, Journal of Manufacturing Science and Engineering, vol.122: 773-780.
67. Shiu, B.W., Apley, D., Ceglarek, D., Shi, J., 2003, Tolerance Allocation for Sheet Metal Assembly using Beam-Based Model, Trans. of IIE, Design and Manufacturing, vol. 35, no. 4: 329-342.
68. Djurdjanovic, D., Ni, J., Lee, J., 2002, Time-frequency Based Sensor Fusion in the Assessment and Monitoring of Machine Performance Degradation, Proc. of ASME IMEC&E 2002, New Orleans, LA: 15-22.
69. Ni. J., Lee, J., Djurdjanovic D., 2003, Watchdog - Information Technology for Proactive Product Maintenance and Its Implications to Ecological Product Re-Use, Proc. on Colloquium on e-Ecological Manufacturing, Technical Univ. of Berlin, Germany: 101-110.
70. Casoetto, N., Djurdjanovic, D., Mayor, R., Lee, J., Ni, J., 2003, Multi-sensor Process Performance Assessment Through the Use of Autoregressive Modeling and Feature Maps, J. of Manufacturing Systems, vol.22, no.1: 64-72.
71. Lee, J., 2003, Review on Advances on Prognostics Algorithms, the 14th International Workshop on Principles of Diagnostics DX-03, Washington, DC: 31-35.
72. Djurdjanovic, D., Yang Jihong, Qiu Hai, Lee, J., and Ni, J., 2003, Web-enabled Remote Spindle Monitoring and Prognostics, Proc. of 2nd International CIRP Conference on Reconfigurable Systems.
73. Buchholz, A., Franke, C., 2003, Assessment of Standard Components for Extended Utilization, Proceedings Colloquium e-ecological Manufacturing, Berlin: 39-42.
74. Seliger, G., Kross, U., Buchholz, A., 2003, Efficient Maintenance Approach by On-board Monitoring of Innovative Freight Wagon Bogie, Proc. of the IEEE ASME International Conference on Advanced Intelligent Mechatronics: 407-411.
75. Seliger, G., Buchholz, A., Kross, U., 2003, Enhanced Product Functionality with Life Cycle Units, Proc. of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, vol. 217 no. B9: 1197-1202.
76. Umeda, Y., Tomiyama, T., Yoshikawa, H., Shimomura, Y., 1994, Using Functional Maintenance to Improve Fault Tolerance, IEEE Expert, Intelligent Systems & Their Applications, vol. 9, no. 3: 25-31.
77. Kondoh, S., Umeda, Y., Yoshikawa, H., 1998, Development of upgradable cellular machines for environmentally conscious products, Annals of the CIRP, 47/1:381-384.
78. Sihn, W., Graupner, T.D., 2003, Web-based maintenance services for manufacturing systems, CARS 2003 Computer Assisted Radiology and Surgery 2: 579-590.
79. Stender, S., 1998, Teleservice - Opening Doors to the World Market, The Globalisation of Manufacturing in the Digital Communications Era of the 21st Century - PROLAMAT: 771-782.
80. Stender, S., 2000, Combining Teleservice and DEPR for a Successful Maintenance Strategy, ICOMS-2000: 066/1-5.
81. Lee, J., 2003, Smart Products and Service Systems for e-Business Transformation, Special Issues on "Managing Innovative Manufacturing, " International Journal of Technology Management, Vol.26, No.1: 45-52.
82. Chen, Z., Lee, J., Qiu, H., 2004, Intelligent Infotronics System Platform for Remote Monitoring and E-Maintenance, International Journal of Agile Manufacturing, Special Issue on Distributed E-Manufacturing, vol. 7, issue2.
83. Yoshikawa H., 1977, A Japanese Project on Fully Automated Factory, Proc. of the PROLAMAT 76: 1-18.