Damage detection using self-sensing concepts

Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering

Volumn 221, Issue 4, 2007, Pages 509-520

  Chung, D D L ^a  

^a UNIVERSITY AT BUFFALO   (United States)

Author keywords

Carbon fibre; Composites; Damage; Detection; Electrical resistance; Polymer; Sensing

Indexed keywords

CARBON FIBERS; CONTACT RESISTANCE; DELAMINATION; POLYMER MATRIX COMPOSITES;

FIBER BREAKAGE; INTERLAMINAR INTERFACES; THROUGH-THICKNESS COMPRESSION EFFECT; VOLUME RESISTIVITY;

DAMAGE DETECTION;

EID: 34848915481     PISSN: 09544100     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544100JAERO203     Document Type: Article

References (60)

1. Wolterman, R. L., Kennedy, J. M., and Farley, G. L. Fatigue damage in thick, cross-ply laminates with a center hole. ASTM Spec. Tech. Publ, STP 1156, Compos. Materi. Fatigue and Fract, 1993, 4, 473-490.
2. Eighth update on NTSB investigation into crash of American Airlines Flight 587, NTSB Advisory, National Transportation Safety Board, Washington, DC 20594, 4 June 2002, available from http://www.ntsb.gov/pressrel/2002/020604.htm.
3. De Freitas, M., Silva, A., and Reis, L. Numerical evaluation of failure mechanisms on composite specimens subjected to impact loading. Compos. B, Eng., 2000, 31(3), 199-207.
4. Rose, J. L., Rajana, K. M., and Barshinger, J. N. Guided waves for composite patch repair of aging aircraft. Rev. Prog. Quant. Nondestruct Eval, 1996, 15B, 1291-1298.
5. Sjogren, A., Krasnikovs, A., and Varna, J. Experimental determination of elastic properties of impact damage in carbon fibre/epoxy laminates. Compos. A, Appl. Sci, 2001, 32(9), 1237-1242.
6. Kemp, M. Self-sensing composites for smart damage detection using electrical properties. Proc. SPIE-Int. Soc. Opt. Eng., 1994, 2361, 136-139.
7. Wang, S. Self-sensing structural composite materials. Dissertation, State University of New York, Buffalo, NY, USA, 2000.
8. Baron, C and Schulte, K. Determination of electric resistance for in-situ determination of fibre failure in carbon fibre-reinforced plastic composites. Materialpruefung, 1988, 30(11-12), 361-366.
9. Schulte, Z. and Baron, C. Load and failure analyses of CFRP laminates by means of electrical resistivity measurements. Compos. Sci Technoi, 1989, 36(1), 63-76.
10. Nanni, F., Auricchio, F., Sarchi, E, Forte, G., and Gusmano, G. Self-sensing CF-GFRP rods as mechanical reinforcement and sensors of concrete beams. Smart Mater. Struct, 2006, 15, 182-186.
11. Yoshitake, K., Shiba, K., Suzuki, M., Sugita, M., and Okuhara, Y. Damage evaluation for concrete structures using fibre reinforced composites as self-diagnosis materials. In Proceedings of SPIE on Smart structures and materials 2004: smart sensor technology and measurement systems (Eds E. Udd and D. Inaudi), 2004, vol. 5384, pp. 89-97 (SPIE, Bellingham, WA).
12. Brooks, D., Hayes, S., Khan, N., Zolfaghar, K., and Fernando, G. F. Self-sensing E-glass fibre reinforced composites. Proc. SPIE-Int Soc. Opt. Eng., 1997, 3042, 111-119.
13. Wang, S. and Chung, D. D. L. Unpublished results.
14. Abry, J. C., Choi, Y. K., Chateauminois, A., Dalloz, B., Giraud, G., and Salvia, M. In-situ monitoring of damage in CFRP laminates by means of AC and DC measurements. Compos. Sci Technol, 2001, 61(6), 855-864.
15. Ceysson, O., Salvia, M., and Vincent, L. Damage mechanisms characterisation of carbon fibre/epoxy composite laminates by both electrical resistance measurements and acoustic emission analysis. Scripta. Mater., 1996, 34(8), 1273-1280.
16. Chung, D. D. L. and Wang, S. Self-sensing of damage and strain in carbon fibre polymer-matrix structural composites by electrical resistance measurement. Polym. Polym. Compos., 2003, 11(7), 515-525.
17. Wang, X. and Chung, D. D. L. Fibre breakage in polymermatrix composite during static and dynamic loading, studied by electrical resistance measurement. J. Mater. Res., 1999, 14(11), 4224-4229.
18. Kaddour, A. S., Al-Salehi, A. R., Al-Hassani, S. T. S., and Hinton, M. J. Electrical resistance measurement technique for detecting failure in CFRP materials at high strain rates. Compos. Sci Technol, 1994, 51(3), 377-385.
19. Kupke, M., Schulte, K., and Schüler, R. Non-destructive testing of FRP by D.C. and A.C. electrical methods. Compos. Sci Technol, 2001, 61, 837-847.
20. Mei, Z., Guerrero, V. H., Kowalik, D. P., and Chung, D. D. L. Mechanical damage and strain in carbon fibre thermoplastic-matrix composite, sensed by electrical resistivity measurement. Polym. Compos., 2002, 23(3), 425-432.
21. Sugita, M., Yanagida, H., and Muto, N. Materials design for self-diagnosis of fracture in CFGFRP composite reinforcement. Smart Mater. Struct, 1995, 4(1A), A52-A57.
22. Prabhakaran, R. Damage assessment through electrical resistance measurement in graphite fibre-reinforced composites. Expl Tech., 1990, 14(1), 16-20.
23. Chung, D. D. L. Unpublished results.
24. Wang, S. and Chung, D. D. L. Piezoresistivity in continuous carbon fibre polymer-matrix composite. Polym. Compos., 2000, 21(1), 13-19.
25. Wang, S., Chung, D. D. L., and Chung, J. H. Method of sensing impact damage in carbon fibre polymermatrix composite by electrical resistance measurement. J. Mater. Sci, 2006, 41, 2281-2289.
26. Wang, S., Pang, D. S., and Chung, D. D. L. Hygrothermal stability of electrical contacts made from silver and graphite electrically conductive pastes. J. Electron. Mater., 2007, 36(1), 65-74.
27. Wang, D. and Chung, D. D. L. Comparative evaluation of the electrical configurations for the two-dimensional electric potential method of damage monitoring in carbon fibre polymer-matrix composite. Smart Mater. Struct, 2006, 15, 1332-1344.
28. Wang, S., Chung, D. D. L., and Chung, J. H. Self-sensing of damage in carbon fibre polymer-matrix composite by measurement of the electrical resistance or potential away from the damaged region. J. Mater. Sci, 2005, 40, 6463-6472.
29. Wang, S., Chung, D. D. L., and Chung, J.H. Impact damage of carbon fibre polymer-matrix composites, monitored by electrical resistance measurement. Compos. Part A, 2005, 36, 1707-1715.
30. Wang, S. and Chung, D. D. L. Self-sensing of flexural strain and damage in carbon fibre polymer-matrix composite by electrical resistance measurement. Carbon 2006, 44(13), 2739-2751.
31. Wang, S., Chung, D. D. L., and Chung, J. H. Self-sensing of damage in carbon fibre polymer-matrix composite cylinder by electrical resistance measurement. J. Intell. Mater. Systems Struct, 2006, 17(1), 57-62.
32. Chu, Y.-W. and Yum, Y.-J. Detection of delamination in graphite/epoxy composite by electric potential method. In Proceedings of KORUS 2001, the 5th Korea-Russia International Symposium on Science and technology. Section 5, Mechanics and Automotive Engineering, 2001, pp. 240-242 (IEEE, Piscataway, NJ).
33. Irving, P. E. and Thiagarajan, C. Fatigue damage characterization in carbon fibre composite materials using an electrical potential technique. Smart Mater. Struct, 1998, 7, 456-466.
34. Todoroki, A., Tanaka Y., and Shimamura Y. Multiprove electric potential change method for delamination monitoring of graphite/epoxy composite plates using normalized response surfaces. Compos. Sci Technol, 2004, 64(5), 749-758.
35. Wang, D. and Chung, D. D. L. Comparative evaluation of the electrical configurations for the two-dimensional electric potential method of damage monitoring in carbon fibre polymer-matrix composite. Smart Mater. Struct, 2006, 15, 1332-1344.
36. Wang, D., Wang, S., Chung, D. D. L., and Chung, J. H. Comparison of the electrical resistance and potential techniques for the self-sensing of damage in carbon fibre polymer-matrix composites. J. Intell. Mater. Systems Struct, 2006, 17(10), 853-861.
37. Wang, D., Wang, S., Chung, D. D. L., and Chung, J. H. Sensitivity of the two-dimensional electric potential/resistance method for damage monitoring in carbon fibre polymer-matrix composite. J. Mater. Sci., 2006, 41(15), 4839-4846.
38. Angelidis, N. and Irving, P. E. Detection of impact damage in CFRP laminates by means of electrical potential techniques. Compos. Sci Technol, 2007, 67, 594-604.
39. Masson, L. C. and Irving, P. E. Comparison of experimental and simulation studies of location of impact damage in polymer composites using electrical potential techniques. In Proceedings of SPIE, 5th European Conference on Smart structures and materials (Eds P. E Gobin and C. M. Friend), 2000, vol. 4073, pp. 182-193 (SPIE, Bellingham, WA).
40. Angelidis, N., Khemiri, N., and Irving, P. E. Experimental and finite element study of the electrical potential technique for damage detection in CFRP laminates. Smart Mater. Struct, 2005, 14, 147-154.
41. Wang, X. and Chung, D. D. L. Self-monitoring of fatigue damage and dynamic strain in carbon fibre polymermatrix composite. Compos. PartB, 1998, 29B(1), 63-73.
42. Park, J. B., Hwang,T. K.,Kim,H. G., andDoh,Y. D. Experimental and numerical study of the electrical anisotropy in unidirectional carbon-fibre-reinforced polymer composites. Smart Mater. Struct, 2007, 16(1), 57-66.
43. Prasse, T., Michel, E, Mook, G., Schulte, K., and Bauhofer, W. A comparative investigation of electrical resistance and acoustic emission during cyclic loading of CFRP laminates. Compos. Sci Technol, 2001, 61, 831-835.
44. Wang, S., Chung, D. D. L., and Chung, J. H. Effects of composite lay-up configuration and thickness on the damage self-sensing behaviour of carbon fibre polymer-matrix composite. J. Mater. Sci, 2005, 40(2), 561-568.
45. Wang, S., Kowalik, D. P., and Chung, D. D. L. Self-sensing attained in carbon fibre polymer-matrix structural composites by using the interlaminar interface as a sensor. Smart Mater. Struct, 2004, 13(3), 570-592.
46. Wang, S. and Chung, D. D. L. The interlaminar interface of a carbon fibre epoxy-matrix composite as an impact sensor. J. Mater. Sci, 2005, 40, 1863-1867.
47. Luo, X. and Chung, D. D. L. Interface in mechanically fastened polymer joint, studied by contact electrical resistance measurement. Polym. Eng. Sci., 2000, 40(7), 1505-1509.
48. Leong, C-K., Wang, S., and Chung, D. D. L. Effect of through-thickness compression on the microstructure of carbon fibre polymer-matrix composites, as studied by electrical resistance measurement. J. Mater. Sci., 2006, 41(10), 2877-2884.
49. Wang, D. and Chung, D. D. L. Through-thickness stress sensing of carbon fibre polymer-matrix composite by electrical resistance measurement. Smart Mater. Struct, in press.
50. Wang, S., Mei, Z., and Chung, D. D. L. Interlaminar damage in carbon fibre polymer-matrix composites, studied by electrical resistance measurement. Int. J. Adh. Adh., 2001, 21 (ER6), 465-471.
51. Rang, J. H., Paty, S., Kim, R. Y., and Tandon, G. P. Self-diagnosis of damage in fibrous composites using electrical resistance measurements. In Proceedings of the SPIE, 2006, vol. 6176, pp. 617602-1-617602-12.
52. Schueler, R., Joshi, S. P., and Schulte, K. Damage detection in CFRP by electrical conductivity mapping. Compos. Sci Technol, 2001, 61, 921-930.
53. Xia, Z., Okabe, T., Park, J. B., Curtin, W. A., and Takeda, N. Quantitative damage detection in CFRP composites: coupled mechanical and electrical models. Compos. Sci Technol, 2003, 63, 1411-1422.
54. Todoroki, A., Tanaka, M., and Shimamura, Y. Electrical resistance change method for monitoring delaminations of CFRP laminates: effect of spacing between electrodes. Compos. Sci Technol, 2005, 65, 37-46.
55. Todoroki, A. and Ueda, M. Low-cost delamination monitoring of CFRP beams using electrical resistance changes with neural networks. Smart Mater. Struct, 2006, 15, N75-N84.
56. Wang, S. and Chung, D. D. L. Negative piezoresistivity in continuous carbon fibre epoxy-matrix composite. J. Mater. Sci, Online First, 2007.
57. Angelidis, N., Wei, C. Y., and Irving, P. E. The electrical resistance response of continuous carbon fibre composite laminates to mechanical strain. Compos. Part A, 2004, 35, 1135-1147.
58. Zhu, S. and Chung, D. D. L. Analytical model of piezoresistivity for strain sensing in carbon fibre polymermatrix structural composite under flexure. Carbon, in press.
59. Wang, X., Fu, X., and Chung, D. D. L. Strain sensing using carbon fibre. J. Mater. Res., 1999, 14(3), 790-802.
60. Wang, S. and Chung, D. D. L. Mechanical damage in carbon fibre polymer-matrix composite, studied by electrical resistance measurement. Compos. Interface, 2002, 9(1), 51-60.