Modeling, identification, design, and implementation of nonlinear automotive idle speed control systems - An overview

IEEE Transactions on Systems, Man and Cybernetics Part C: Applications and Reviews

Volumn 37, Issue 6, 2007, Pages 1137-1151

  Ye, Zhengmao ^a  

^a SOUTHERN UNIVERSITY   (United States)

Author keywords

Adaptive control; Artificial intelligence; Automotive electronics; Fuzzy control; Intelligent control; Internal combustion engines; Neural nets; Neural networks; Nonlinear systems; Optimal control; Velocity measurement

Indexed keywords

ADAPTIVE CONTROL SYSTEMS; ARTIFICIAL INTELLIGENCE; AUTOMOTIVE ENGINEERING; CONTROL SYSTEM SYNTHESIS; FUZZY CONTROL; INTELLIGENT CONTROL; NEURAL NETWORKS; NONLINEAR CONTROL SYSTEMS; OPTIMAL CONTROL SYSTEMS; TIME VARYING CONTROL SYSTEMS; UNCERTAIN SYSTEMS; VELOCITY MEASUREMENT;

AUTOMOTIVE ELECTRONICS; DYNAMIC CONTROL; IDLE SPEED CONTROL;

SPEED CONTROL;

EID: 36248969995     PISSN: 10946977     EISSN: None     Source Type: Journal    
DOI: 10.1109/TSMCC.2007.905810     Document Type: Review

References (91)

1. M. Abate, B. Barmish, C. Sanchez, and R. Tempo, "Application of some new tools to robust stability analysis of spark ignition engines: A case study," IEEE Trans. Control Syst. Technol., vol. 2, no. 1, pp. 22-30, Mar. 1994.
2. M. Abate and V. Dinunzio, "Idle speed control using optimal regulation," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 905008, 1990.
3. M. Abate and N. Dosio, "Use of fuzzy logic for engine idle speed control," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 900594, 1990.
4. L. Albertoni, A. Balluchi, A. Casavola, C. Gambelli, E. Mosca, and A. L. Sangiovanni, "Hybrid command governors for idle speed control in gasoline direct injection engines," in Proc. 2003 Amer. Control Conf., Denver, CO, vol. 1, pp. 773-778.
5. L. Albertoni, A. Balluchi, A. Casavola, C. Gambelli, E. Mosca, and A. L. Sangiovanni, "Idle speed control for GDI engines using robust multirate hybrid command governors," in Proc. 2003 IEEE Int. Conf. Control Appl., Istanbul, Turkey, vol. 1, pp. 237-242.
6. H. Ando and M. Motomochi, "Contribution of fuel transport lag and statistical perturbation in combustion to oscillation of SI engine speed at idle," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 870545, 1987.
7. B. Badreddine, A. Zaremba, F. Lin, and J. Sun, "Active damping of engine idle speed oscillation by applying adaptive PID control," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 2001-01-0261, 2001.
8. A. Balluchi, L. Benvenuti, T. Villa, H. Wong-Toi, and A. L. Sangiovanni, "Hybrid controller synthesis for idle speed management of an automotive engine," in Proc. Amer. Control Conf., Chicago, IL, vol. 2, Jun. 2000, pp. 1181-1185.
9. A. Balluchi, L. Benvenuti, T. Villa, H. Wong-Toi, and A. L. Sangiovanni, "Engine idle speed control via maximal safe set computation in the crank-angle domain," in Proc. 2002 IEEE Int. Symp. Ind. Electron. Sevilla, Spain, vol. 2, pp. 618-622.
10. S. Bengea, X. Li, and R. Decarlo, "Combined controller-observer design for uncertain time delay systems with application to engine idle speed control," J. Dynam., Syst., Meas. Control, vol. 126, pp. 772 780, Dec. 2004.
11. P. Bidan and L. Kouadio, "Electrical assistance for S.I. engine idle-speed control," Control Eng. Pract., vol. 6, no. 7, pp. 829-836, 1998.
12. C. Bohn, A. Cortabarria, V. Hartel, and K. Kowalczyk, "Active control of engine-induced vibrations in automotive vehicles using disturbance observer gain scheduling," Control Eng. Pract., vol. 12, no. 8, pp. 1029-1039, 2004.
13. P. Botsaris, D. Bechrakis, and P. Sparis, "An estimation of 3-way catalyst performance using artificial neural networks during idle speed," in Proc. 2004 Fall Tech. Conf. ASME Intern. Combust. Engine Div., Long Beach, CA, pp. 123-129.
14. S. Boverie, B. Demaya, J. Lequellec, and A. Titli, "Contribution of fuzzy logic control to the improvement of modern car performance," Control Eng. Pract., vol. 1, no. 2, pp. 291-297, Apr. 1993.
15. S. Boverie, C. Patrice, and M. Jean, "Fuzzy sliding mode control application to idle speed control speed," in Proc. IEEE Int. Conf. Fuzzy Syst., Orlando, FL, vol. 2, Jun. 1994, pp. 974-977.
16. P. Bromnick, "Development of a model predictive controller for engine idle speed using Cpower," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 1999-01-1171, 1999.
17. K. Butts, N. Sivashankar, and J. Sun, "Feedforward and feedback design for engine idle speed control using 11 optimization," in Proc. Amer. Control Conf., Seattle, WA, vol. 4, Jun.1995, pp. 2587-2590.
18. K. Butts, N. Sivashankar, and J. Sun, "Application of L1 optimal control to the engine idle speed control problem," IEEE Trans. Control Syst. Technol., vol. 7, no. 2, pp. 258-270, Mar. 1999.
19. P. Danijel and D. Hrovat, "SI engine load torque estimator based on adaptive kalman filter and its application to idle speed control," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 2005-01-0036, 2005.
20. J. Deur, M. Jansz, D. Pavkovic, and M. Jansz, "Identification and speed control of SI engine for idle operating mode," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 2004-01-0898, 2004.
21. L. Feldkemp and G. Puskorius, "Trainable fuzzy and neural-fuzzy systems for idle-speed control," in Proc. 2nd IEEE Int. Conf. Fuzzy Syst. San Francisco, CA, vol. 1, Mar. 1999, pp. 45-51.
22. R. Ford, "Robust automotive idle speed control in a novel framework," Ph.D thesis, Cambridge Univ., Cambridge, U.K., 2000.
23. R. Ford and N. Collings, "Dynamic effect of residual gas temperature on combustion torque at idle," presented at the SAE Fall Fuels Lubes Conf., 2001.
24. R. Ford and K. Glover, "An application of coprime factor based anti-windup and bumpless transfer control to the spark ignition engine idle speed control problem," in Proc. 39th IEEE Conf. Decision Control, Sydney, Australia, vol. 2, Dec. 2000, pp. 1069-1074.
25. A. Gangopadhyay and P. Meckl, "Multivariable PI tuning and application to engine idle speed control," in Proc. Amer. Control Conf., San Diego, CA, Jun. 1999, pp. 2678-2682.
26. L. Glielmo, S. Santini, and I. Cascella, "Idle speed control through output feedback stabilization for finite time delay systems," in Proc. Amer. Control Conf., Chicago, IL, vol. 1, Jun. 2000, pp. 45-49.
27. C. GokCek and P. Kabamba, "Damping of idle engine speed oscillations using a reversible alternator," in Proc. Amer. Control Conf., Philadelphia, PA, vol., 3, Jun. 1998, pp. 1400-1404.
28. D. Gorinevsky and L. Feldkamp, "On-line optimization of RBF network feedforward compensation load disturbance in idle speed control of automotive engine," in Proc. 1996 IEEE Int. Conf. Control Appl., Dearborn, MI, pp. 764-769.
29. M. Han, R. Loh, and L. Wang, "Optimal idle speed control of an automotive engine," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 981059, 1998.
30. P. Herman and M. Franchek, "Engine idle speed control using actuator saturation," IEEE Trans. Control Syst. Technol., vol. 8, no. 1, pp. 192-199, Jan. 2000.
31. M. Howell and M. Best, "On-line PID tuning for engine idle-speed control using continuous action reinforcement learning automata," Control Eng. Pract., vol. 8, no. 2, pp. 147-154, Feb. 2000.
32. D. Hrovat and B. Bodenheimer, "Robust automotive idle speed control design based on μ-synthesis," in Proc. Amer. Control Conf., San Francisco, CA, vol. 4, 1993, pp. 1778-1783.
33. D. Hrovat and J. Sun, "Models and control methodologies for IC engine idle speed control design," Control Eng. Pract., vol. 5, no. 8, pp. 1093-1100, 1997.
34. D. Hrovat and W. Powers, "Computer control systems for automotive powertrains," IEEE Control Syst. Mag., vol. 8, no. 4, pp. 3-10, Aug. 1988.
35. H. Inoue and S. Washino, "A performance improvement in idle speed control system with feedforward compensation for alternator load current," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 900777, 1990.
36. R. Jurgen, Automobile Electronics Handbook. New York: McGraw-Hill, 1995.
37. M. Kajitani and K. Nonami, "High performance idle speed control applying the sliding mode control with H robust hyperplane," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 2001-01-0263, 2001.
38. D. Kim and J. Park, "Neural network control for reducing engine speed fluctuation at idle," in Proc. 1999 IEEE Int. Conf. Syst., Man, Cybern., Tokyo, Japan, vol. 4, pp. 629-634.
39. L. Kjergaard, S. Nielsen, T. Vesterholm, and E. Hendricks, "Advanced nonlinear engine idle speed control systems," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 940974, 1994.
40. F. Klawonn, J. Gebhardt, and R. Kruse, "Fuzzy control on the basis of equality relations with an example from idle speed control," IEEE Trans. Fuzzy Syst., vol. 3, no. 3, pp. 336-350, Aug. 1995.
41. I. Kolmanovsky, E. Gilbert, and J. Cook, "Reference governors for supplemental torque source control in turbocharged diesel engines," in Proc. Amer. Control Conf., Albuquerque, NM, vol. 1, Jun. 1997, pp. 652-656.
42. O. Kovalenko, D. Liu, and H. Javaherin, "Neural network modeling and adaptive critic control of automotive fuel injection system," in Proc. 2004 IEEE Int. Symp. Intell. Control, Taipei, Taiwan, pp. 368-373.
43. X. Li and S. Yurkovich, "Discrete adaptive sliding mode control for idle speed regulation in IC engines," in Proc. 2000 IEEE Int. Conf. Control Appl., Anchorage, AK, pp. 237-242.
44. X. Li and S. Yurkovich, "Neural network based, discrete adaptive sliding mode control for idle speed regulation in IC engines," J. Dynam. Syst., Meas. Control, vol. 122, pp. 269-275, Jun. 2000.
45. X. Li and S. Yurkovich, "Sliding mode control of delayed systems with application to engine idle speed control," IEEE Trans. Control Syst. Technol., vol. 9, no. 6, pp. 802-810, Nov. 2001.
46. M. Livshitz and D. Sanvido, "Absolute stability of idle speed control system," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 860412, 1986.
47. M. Lu and R. Loh, "Modeling, design and implementation of discrete sliding mode control for an engine idle speed control system," in Proc. Amer. Control Conf., Anchorage, AK, vol. 3, May 2002, pp. 1984-1989.
48. C. Manzie and H. Watson, "A novel approach to disturbance rejection in idle speed control towards reduced idle fuel consumption," in Proc. Inst. Mech. Eng., Part D: J. Automob. Eng., 2003, vol. 217, no. 8, pp. 677-690.
49. A. Martinez and M. Jamshidi, "Design of fuzzy logic based engine idle-speed controllers," in Proc. 36th Midwest Symp. Circuits Syst. Detroit, MI, Aug. 1993, vol. 2, pp. 1544-1547.
50. D. Memering and P. Meckl, "Comparison of adaptive control technique applied to diesel engine idle speed regulation," J. Dynam. Syst., Meas. Control, vol. 124, pp. 682-688, Dec. 2000.
51. M. Mihelc and S. Citron, "An adaptive idle mode control system," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 840443, 1984.
52. M. Livshiz, D. Sanvido, and S. Stiles, "Nonlinear engine model for idle speed control," in Proc. 33rd Conf. Decision Control, Lake Buena Vista, FL, Dec. 1994, vol. 3, pp. 2449-2451.
53. H. Mohamed, S. Munzir, M. Abdulmuin, and S. Hameida, "Fuzzy modeling and control of a spark ignition engine idle mode," in Proc. IEEE Intell. Syst. Technol. New Millennium, 2000, vol. 2, no. 2, pp. 586-591.
54. D. Nicolao, G. Rossi, R. Scattolini, and M. Suffritti, "Identification and idle speed control of internal combustion engines," Control Eng. Pract., vol. 7, no. 9, pp. 1061-1069, Sep. 1999.
55. Y. Nishimura and K. Ishii, "Engine idle stability analysis and control," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 860415, 1986.
56. A. Petridis and A. Shenton, "Linear robust control of identified nonlinear inverse compensated SI engine," J. Dynam. Syst., Meas. Control, vol. 125, no. 1, pp. 69-73, Mar. 2003.
57. A. Petridis and A. Shenton, "Inverse-NARMA: A robust control method applied to SI engine idle-speed regulation," Control Eng. Pract., vol. 11, no. 3, pp. 279-290, 2003.
58. G. Puskorius and L. Feldkamp, "Automotive engine idle speed control with recurrent neural networks," in Proc. 1993 Amer. Control Conf. San Francisco, CA, vol. 1, pp. 311-316.
59. G. Puskorius and L. Feldkemp, "Truncated backpropagation through time and Kalman filter training for neurocontrol," in Proc. 1994 IEEE Int. Conf. Neural Netw., Orlando, FL, vol. 4, pp. 2488-2493.
60. A. Raffari, L. Y. Wang, and O. Daniel, "Optimal H-infinity decoupling of engine idle speed and emission subsystems," in Proc. Annu. Southeastern Symp. Syst. Theory, Baton Rouge, LA, Mar./Apr. 1996, pp. 7-11.
61. F. Salam and A. Gharbi, "Temporal neuro-control of idle engine speed," in Proc. 1996 IEEE Int. Symp. Intell. Control, Dearborn, MI, pp. 396-401.
62. R. Scattolini and C. Siviero, "Modeling and identification of an electromechanical internal combustion engine throttle body," Control Eng. Pract., vol. 5, no. 9, pp. 1253-1259, Sep. 1997.
63. J. Scillieri, J. Buckland, and J. Fredenberg, "Use of feedforward in idle speed control for a direct injection spark ignition engine during lean burn," in Proc. Amer. Control Conf., Anchorage, AK, May 2002, vol. 2, pp. 1419-1424.
64. J. Scillieri and J. Buckland, "Reference feedforward in the idle speed control of a direct-injection spark-ignition engine," IEEE Trans. Veh. Technol., vol. 54, no. 1, pp. 51-61, Jan. 2005.
65. D. Shim, J. Park, P. Khargonekar, and W. Ribbens, "Engine idle speed control," in Proc. Amer. Control Conf., Seattle, WA, Jun. 1995, vol. 4, pp. 2582-2586.
66. D. Shim, J. Park, P. Khargonekar, and W. Ribbens, "Reducing automotive engine speed fluctuation at idle," IEEE Trans. Control Syst. Technol., vol. 4, no. 4, pp. 404-410, Jul. 1996.
67. A. Sivasubramanian and P. Meckl, "Numerical solution for multivariable idle speed control of a lean burn natural gas engine," in Proc. Amer. Control Conf., Boston, MA, Jun./Jul. 2004, vol. 1, pp. 138-143.
68. A. Stotsky, B. Egardt, and S. Eriksson, "Variable structure control of engine idle speed with estimation of unmeasurable disturbances," J. Dynam. Syst., Meas. Control, vol. 122, pp. 599-603, Dec. 2000.
69. P. Sun, P. Barry, and H. Davor, "Optimal idle speed control of an automotive engine," in Proc. Amer. Control Conf., Chicago, IL, Jun. 2000, vol. 2, pp. 1018-1126.
70. T. Takahashi and T. Ueno, "A simple engine model for idle speed control," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 850291, 1985.
71. M. Thornhill and S. Thompson, "A comparison of idle speed control schemes," Control Eng. Pract., vol. 8, no. 5, pp. 519-530, May 2000.
72. G. Vachtsevanos, "Idle speed control of an automotive engine using systematic fuzzy logic methodology," in Proc. 12th Triennial World Congr. Int. Fed. Autom. Control, Sydney, Australia, Jul. 1994, vol. 3, pp. 29-34.
73. G. Vachtsevanos, S. Farinwata, and H. Kang, "A systematic design method for fuzzy logic control with application to automotive idle speed control," in Proc. 31st Conf. Decision Control, Tucson, AZ, Dec. 1992, vol. 3, pp. 2547-2548.
74. Y. Wang, A. Stefanopoulou, and M. Levin, "Idle speed control: An old problem in a new engine design," in Proc. Amer. Control Conf., San Diego, CA, Jun. 1999, vol. 2, pp. 1217-1221.
75. S. Watanabe and M. Imamura, "Development of model-following idle speed control system incorporating engine torque models," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 920160, 1992.
76. M. Wendeker and J. Czarnigowski, "Adaptive control of the idle speed," in Proc. ASME Intern. Combust. Engine Div. 2003 Spring Tech. Conf. Salzburg, Austria, pp. 559-563.
77. S. Williams, D. Hrovat, C. Davey, D Maclay, J. Crevel, and L. Chen, "Idle speed control design using an H-infinity approach," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 930770, 1993.
78. H. Yamaguchi and S. Takizawa, "Analysis on idle speed stability in port fuel injection engine," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 861389, 1986.
79. Z. Ye, "Research on idle speed control of gasoline engine and its fuzzy control implementation," M.S. thesis, Tsinghua Univ., Beijing, China, Jun. 1996.
80. Z. Ye, "Temperature impact on modeling and control of lean NOx trap," J. Fuels Lubricants, vol. 112-114, pp. 790-795, Sep. 2004.
81. Z. Ye, "Automotive hybrid system optimization using dynamic programming," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 2003-01-0847, 2003.
82. Z. Ye, "GDI engine exhaust aftertreatment system analysis and oxygen sensor based identification, modeling and control of lean NOx trap," in Proc. ASME Intern. Combust. Engine Div. 2003 Spring Tech. Conf., Salzburg, Austria, 2007, pp. 713-719.
83. Z. Ye and M. Lai, "Genetic algorithm optimization of fuel economy for PFI engine with VVT-VCR," in Proc. 2004 IEEE Int. Conf. Control Appl., Taiwan, China, vol. 1, pp. 364-369.
84. Z. Ye and L. Li, "Control options for exhaust gas aftertreatment and fuel economy of GDI Engine Systems," in Proc. 2003 IEEE Conf. Decision Control, Maui, HI, vol. 2, pp. 1783-1788.
85. S. Yurkovich and M. Simpson, "Crank angle domain modeling and control for idle speed," Soc. Automotive Eng., Warrendale, PA, Tech. Rep. 970027, 1997.
86. S. Yurkovich and M. Simpson, "Comparative analysis for idle speed control: A crank-angle domain viewpoint," in Proc. Amer. Control Conf., Albuquerque, NM, Jun. 1997, vol. 1, pp. 278-283.
87. B. K. Powell, J. A. Cook, and J. W. Grizzle, "Modeling and analysis of an inherently multi-rate sampling fuel injected engine idle speed control loop," Trans. ASME, J. Dyn. Syst., Meas. Control, vol. 109, pp. 405-409, Dec. 1987.
88. B. K. Powell, J. A. Cook, and J. W. Grizzle, "Modeling and analysis of an inherently multi-rate sampling fuel injected engine idle speed control loop," in Proc 1987 Am. Control Conf., 1987, vol. 3, pp. 1543-1548.
89. B. K. Powell and W. F. Powers, "Linear quadratic control design for nonlinear IC engine systems," in Proc. 10th Anniversary Int. Symp. Autom. Technol. Autom., 1981, vol. 1, pp. 1-18.
90. C. Carnevale and A. Moschetti, "Idle speed control with H-infinity technique," 1993, SAE Technical Paper 930770.
91. A. Balluchi, L. Benvenuti, M.D. D. Benedetto, S. Cardellino, C. Rossi, and A. L. Sangiovanni-Vincentelli, "Hybrid control of the air-fuel ratio in force transients for multi-point injection engines," in Proc. 38th IEEE Conf. Decis. Control, 1999, vol. 1, pp. 316-321.