Active control of engine-induced vibrations in automotive vehicles using disturbance observer gain scheduling

Control Engineering Practice

Volumn 12, Issue 8, 2004, Pages 1029-1039

  Bohn, C ^a   Cortabarria, A ^a   Hartel V ^a   Kowalczyk, K ^b  

^a Continental AG ^*  (Germany)

^b BUNDESWEHR UNIVERSITY MUNICH   (Germany)

Author keywords

Active noise control; Active vibration control; Disturbance observers; State feedback

Indexed keywords

ACOUSTIC VARIABLES MEASUREMENT; AUTOMOTIVE ENGINEERING; VEHICLES; VIBRATIONS (MECHANICAL);

HARMONIC DISTURBANCES;

CONTROL SYSTEMS;

CONTROL METHOD; NOISE; VIBRATION;

EID: 2542517709     PISSN: 09670661     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.conengprac.2003.09.008     Document Type: Article

References (44)

1. Adachi, S., - Sano, H. (1996). Application of a two-degree-of-freedom type active noise control using IMC to road noise inside automobiles. Proceedings of the 35th IEEE conference on decision and control, Kobe (pp. 2794-2795).
2. Adachi, S., - Sano, H. (1998). Active noise control system for automobiles based on adaptive and robust control. Proceedings of the 1998 IEEE international conference on control applications, Trieste (pp. 1125-1128).
3. Ahmadian, M., - Jeric, K. M. (1999). The application of piezoceramics for reducing noise and vibration in vehicle structures. SAE technical paper 1999-01-2868, Proceedings of the international off-highway and powerplant congress and exposition, Indianapolis.
4. Bao, C., Sas, P., - Van Brussel, H. (1991). Active control of engine-induced noise inside cars. Proceedings of the international conference on noise control inter-noise 91, Sydney (pp. 525-528).
5. Bohn, C., Karkosch, H. -J., Marienfeld, P. M., - Svaricek, F. (2000). Automotive applications of rapid prototyping for active vibration control. Proceedings of the 3rd IFAC workshop advances in automotive control, Karlsruhe, Germany (pp. 191-196).
6. Buchholz K. Good vibrations Automotive Engineering 108 2000 85-89
7. Capitani, R., Citti, P., Delogu, M., Mascellini, R., - Pilo, L. (2000). Experimental validation of a driveline numerical model for the study of vibrational comfort of a vehicle. Proceedings of the 33rd ISATA electric, hybrid, fuel cell and alternative vehicles/powertrain technology, Dublin (pp. 521-530).
8. Clark R.L. Saunders W.R. Gibbs G.P. Adaptive structures: Dynamics and control 1998 Wiley New York
9. Cortabarria, A., Bohn, C., Hanna, J., Karkosch, H. -J., Marienfeld, P. M., - Svaricek, F. (2001). Design, simulation and implementation of active vibration control systems in automotive vehicles. 3. VDI/VDE-GMA Aussprachetag Rechnergestützter Entwurf von Regelungssystemen, Dresden.
10. Crede C.E. Ruzicka J.E. Theory of vibration isolation Harris C.M. Crede C.E. Shock and vibration handbook 2nd ed. 1976 McGraw-Hill New York
11. Debeaux, E., Claessens, M., - Hu, X. (2000). An analytical-experimental method for analysing the low-frequency interior acoustics of a passenger car. Proceedings of the 2000 international conference on noise and vibration engineering ISMA 25, Leuven (pp. 1331-1338).
12. Dehandschutter W. Sas P. Active control of structure-borne road noise using vibration actuators Journal of Vibration and Acoustics 120 1998 517-523
13. Doppenberg, E. J. J., Berkhoff, A. P., - van Overbeek, M. (2000). Smart materials and active noise and vibration control in vehicles. Proceedings of the 3rd IFAC workshop advances in automotive control, Karlsruhe, Germany (pp. 205-214).
14. Elliot S. Signal processing for active control 2001 Academic Press San Diego
15. Fursdon, P. M. T., Harrison, A. J., - Stoten, D. P. (2000). The design and development of a self-tuning active engine mount. Proceedings of the European conference on noise and vibration 2000, London (pp. 21-32).
16. Gelb, A. (Ed.), 1974. Applied optimal estimation. Cambridge: MIT Press.
17. Grewal M.S. Andrews A.P. Kalman filtering: Theory and practice 1993 Prentice-Hall Upper Saddle River
18. Härtel, V., - Hofmann, M. (1981). Berechnung, Vermessung und konstruktive Auslgung von gummi-elatischen Bauteilen zur Verbesserung des Fahrkomforts. VDI Report No. 418, Dusseldorf: VDI-Verlag (Improving driving comfort through calculations, measurements and construction design of elastic rubber components, in German).
19. Härtel, V., - Hofmann, M. (1982). Optimierung körperschalldämmender Motorlagerungen. VDI report no. 437, Dusseldorf: VDI-Verlag (Optimisation of engine mounting systems for isolation of structure-borne noise, in German).
20. Härtel, V., - Hofmann, M. (1983). Moderne Konzepte für Motorlagerungen. VDI report no. 499, Dusseldorf: VDI-Verlag (Modern engine mounting concepts, in German).
21. Hartwig, C., Haase, M., Hofmann, M., - Karkosch, H. -J. (2000). Electromagnetic actuators for active engine vibration cancellation. Proceedings of the 7th international conference on new actuators ACTUATOR 2000, Bremen.
22. Haverkamp, M. (2000). Solving vehicle noise problems by analysis of the transmitted sound energy. Proceedings of the 2000 international conference on noise and vibration engineering ISMA25, Leuven (pp. 1339-1346).
23. Heylen W. Lammens S. Sas P. Modal analysis theory and testing 1997 Katholieke Universiteit Leuven Departement Werktuigkunde Leuven
24. Hong J. Bernstein D.S. Bode integral constraints, colocation, and spillover in active noise and vibration control IEEE Transactions on Control Systems Technology 6 1998 111-120
25. Huber, G., Lorenz, M., Bohn, C., - Härtel, V. (2002). Active cancellation of structure borne engine vibrations in passenger cars with thin piezoceramic plate cctuators. Proceedings of the 8th conference on new actuators ACTUATOR 2002, Bremen.
26. Karkosch, H. -J., Svaricek, F., Shoureshi, R. A., - Vance, J. L. (1999). Automotive applications of active vibration control. Proceedings of the European control conference, Karlsruhe.
27. Käsler, R. (2000). Development trends and vibro-acoustic layout criteria for powertrain mounting systems. Proceedings of the International Congress Engine - Environment 2000, Graz (pp. 155-172).
28. Kuo S.M. Morgan D.R. Active noise control 1996 Wiley New York
29. Lecce, L., Franco, F., Maja, B., Montouri, G., - Zandonella-Necca, D. (1995). Vibration active control inside a car by using piezo actuators and sensors. 28th International symposium on automotive technology and automation. Proceedings for the dedicated conference on mechatronics-Efficient computer support for engineering, manufacturing, testing and reliability, Croydon, UK (pp. 423-432).
30. Ljung L. Söderström T. Theory and practice of recursive identification 1983 MIT Press Cambridge, MA
31. Lueg, P. (1933). Process of silencing sound oscillations. US patent no 2,043,416, Filed: March 8, 1934. Patented: June 6, 1936. Priority (Germany).
32. Necati, G. A., Doppenberg, E. J. J., - Antila, M. (2000). Noise radiation reduction of a car dash panel. Proceedings of the 2000 international conference on noise and vibration engineering ISMA25, Leuven (pp. 855-862).
33. Nel, C. B. (2000). Optimisation of engine mount systems on front-wheel-drive vehicles for multiple operational conditions. Proceedings of the 2000 international conference on noise and vibration engineering ISMA25, Leuven (pp. 1309-1316).
34. Preumont A. Vibration control of active structures 1997 Kluwer Academic Publishers Dordrecht, The Netherlands
35. Pricken, F. (2000). Active noise cancellation in future air intake systems. SAE-Paper 2000-01-0026, Powertrain Systems NVH, SAE Special Publication SP-1515 (pp. 1-6).
36. Riley, B., - Bodie, M. (1996). An adaptive strategy for vehicle vibration and noise cancellation. Proceedings of the IEEE 1996 national aerospace and electronics conference NAECON 1996, Dayton (pp. 836-843).
37. Sas P. Dehandschutter W. Active structural and acoustic control of structure-borne road noise in a passenger car Noise and Vibration Worldwide 30 1999 17-27
38. Shoureshi, R. A., Alves, G., Knurek, T., Novotry, D., Ogundipe, L., - Wheeler, M. (1995). Mechatronically based vibration and noise control in automotive systems. 28th International symposium on automotive technology and automation. Proceedings for the dedicated conference on mechatronics-Efficient computer support for engineering, manufacturing, testing and reliability. Croydon, UK (pp. 691-698).
39. Shoureshi, R. A., Gasser, R., - Vance, J. (1997). Automotive applications of a hybrid active noise and vibration control. Proceedings of the IEEE international symposium on industrial electronics, Guimaraes, Portugal (pp. 1071-1076).
40. Shoureshi R. Knurek T. Automotive applications of a hybrid active noise and vibration control IEEE Control Systems Magazine 16 1996 72-78
41. Shoureshi, R. A., Vance, J. L., Ogundipe, L., Schaaf, K., Eberhard, G., - Karkosch, H. -J. (1997). Active vibro-acoustic control in automotive vehicles. Proceedings of the 1997 noise and vibration conference, Traverse City, MI (pp. 131-136).
42. Svaricek F. Bohn C. Karkosch H.-J. Härtel V. Aktive Schwingungskompensation im Kfz aus regelungstechnischer Sicht Automatisierungstechnik 49 2001 249-259 (Active vibration cancellation in automotive vehicles from a control engineering point of view, in German)
43. Swanson, D. A. (1993). Active engine mounts for vehicles. SAE technical paper 932432, Proceedings of the 1993 international off-highway and powerplant congress and exposition, Milwaukee.
44. Wolf, A., - Portal, E. (2000). Requirements to noise reduction concepts and parts in future engine compartments. SAE-paper 2000-01-0027, Powertrain systems NVH, SAE special publication SP-1515 (pp. 7-12).