Disassembly sequencing: A survey

International Journal of Production Research

Volumn 41, Issue 16, 2003, Pages 3721-3759

  Lambert, A J D ^a  

^a EINDHOVEN UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

ASSEMBLY; MAINTAINABILITY; PROCESS CONTROL; PRODUCT DESIGN; REPAIR;

DISASSEMBLY SEQUENCING;

CONCURRENT ENGINEERING;

EID: 0038156629     PISSN: 00207543     EISSN: None     Source Type: Journal    
DOI: 10.1080/0020754031000120078     Document Type: Review

References (247)

1. ABE, S., MURAYAMA, T., OBA, F. and NARUTAKI, N., 1999, Stability check and reorientation of subassemblies in assembly planning. Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics, 2, 486-491.
2. ÅKERMARK, A. M., 1997, Design for disassembly and recycling. Proceedings of the 4th CIRP International Seminar on Life Cycle Engineering, 237-248.
3. ALEKSANDER, I., FARRENY, H. and GHALLAB, M., 1983, Decision and intelligence. In P. Coiffet (ed.), Robot Technology Series (London, UK: Kogan Page), 6, chapters 6 and 7
4. ARAI, E., UCHIYAMA, N. and IGOSHI, M., 1995, Disassembly path generation to verify the assemblability of mechanical products. Japan Society of Mechanical Engineers International journal, C38(4), 805-810.
5. ARMILLOTTA, A. and SEMERARO, Q., 1997, Assessment of destructive operations in disassembly process planning. International Journal of Flexible Automation and Integrated Manufacturing, 5(1&2), 57-78.
6. ASIEDU, Y. and Gu, P., 1998, Product life cycle cost analysis: state of the art review. International Journal of Production Research, 36(4), 883-908.
7. BALDWIN, D. F., ABELL, T. E., LUI, M. M., DE FAZIO, T. L. and WHITNEY, D. E., 1991, An integrated computer aid for generating and evaluating assembly sequences for mechanical products. IEEE Transactions on Robotics and Automation, 7, 78-94.
8. BEN-ARIEH, D., 1994, A methodology for analysis of assembly operations' difficulty, International Journal of Production Research, 32, 1879-1895.
9. BEN-ARIEH, D. and KRAMER, B., 1994, Computer-aided process planning for assembly: generation of assembly operations sequence. International Journal of Production Research, 32(3), 643-656.
10. BHATIA, P., KARNICK, H. and GHOSH, A., 1996, A configuration space based approach for robot assembly sequencing. Robotica, 14, 633-645.
11. BOKS, C. B., KROLL, E., BROUWERS, W. C. J. and STEVELS, A. L. N., 1996, Disassembly modelling: two applications to a Philips 21' television set. Proceedings of 1996 IEEE International Symposium on Electronics and the Environment, 224-229.
12. BONNEVILLE, F., HENRIOUD, J. M. and BOURJAULT, A., 1995, Generation of assembly sequences with ternary operations. Proceedings of 1995 IEEE International Symposium on Assembly and Task Planning, 245-249.
13. BOOTHROYD, G., POLI, C. and MURCH, L. E., 1982, Automatic assembly. In G. Boothroyd (ed.), Manufacturing Engineering and Materials Processing (New York: Marcel Dekker), Vol. 6.
14. BOOTHROYD, G. and DEWHURST, P., 1983, Design for Assembly Handbook (Amherst, MA: University of Massachusetts)
15. BOURJAULT, A., 1984, Contribution á une approche méthodologique de l'assemblage automatisé: elaboration automatique des séquences opératoires (Besançon, France: Faculty of Science and Technology, Université de Franche-Comté), PhD Thesis, 12 November (in French).
16. BOURJAULT, A., CHAPPE, D. and HENRIOUD, J. M., 1987, Elaboration automatique des gammes d'assemblage à l'aide de résaux de Petri. RAIRO APII, 21, 323-342 (in French, abstract in English).
17. BRENNAN, L., GUPTA, S. M. and TALEB, K. N., 1994, Operations planning issues in an assembly/disassembly environment. International Journal of Operations and Production Management, 14(9), 57-67.
18. CACCIA, C. and POZZETTI A., 1999, A genetic algorithm for disassembly strategy definition. Proceedings of 1999 SPIE Conference on Environmentally Conscious Manufacturing, 68-77.
19. CHAKRABARTY, S. and WOLTER, J. D., 1997, A structure-oriented approach to assembly sequence planning. IEEE Transactions on Robotics and Automation, 13(1), 14-29.
20. CHAO, P. Y. and CHEN, T. T., 2001, Analysis of assembly through product configuration. Computers in Industry, 44, 189-203.
21. CHEN, K. Z., 2001, Development of integrated design for disassembly and recycling in concurrent engineering. Integrated Manufacturing Systems, 12(1), 67-79.
22. CHEN, S.-F., OLIVER, J. H., CHOU, S.-Y. and CHEN, L.-L., 1997, Parallel disassembly by onion peeling. Journal of Mechanical Design, 119, 267-274.
23. CHOI, C. K., ZHA, X. F., NG, T. L. and LAU, W. S., 1998, On the automatic generation of product assembly sequences. International Journal of Production Research, 36(3), 617-633.
24. CLEGG, A. J., WILLIAMS, D. J. and UZSOY, R., 1995, Production planning for companies with remanufacturing capability. Proceedings of 1995 IEEE International Symposium on Electronics and the Environment, pp. 186-191.
25. DAS, S. K., YEDLARAJIAH, P. and NARENDRA, R., 2000, An approach for estimating the end-of-life product disassembly effort and cost. International Journal of Production Research, 38(3), 657-673.
26. DAS, S. K. and NAIK, S., 2002, Process planning for product disassembly. International Journal of Production Research, 40, 1335-1355.
27. DE FAZIO, T. L. and WHITNEY, D. E., 1987, Simplified generation of all mechanical assembly sequences. IEEE Journal of Robotics and Automation, RA-3 (6), 640-658.
28. DE FLORIANI, L. and NAGY, G., 1989, A graph model for face-to-face assembly. Proceedings of 1989 IEEE International Conference on Robotics and Automation, pp. 75-78.
29. DE LIT, P., LATINNE, P., REKIEK, B. and DELCHAMBRE, A., 2001, Assembly planning with an ordering genetic algorithm. International Journal of Production Research, 39(16), 3623-3640.
30. DE RON, A. J. and PENEV, K., 1995, Disassembly and recycling of electronic consumer products: an overview. Technovation, 15(6), 363-374.
31. DINI, G. and SANTOCHI, M., 1992, Automated sequencing and subassembly detection in assembly planning. CIRP Annals, 41(1), 1-4.
32. DINI, G., FAILLI, F., LAZZERINI, B. and MARCELLONI, F., 1999, Generation of optimized assembly sequences using genetic algorithms. CIRP Annals, 48(1), 17-20.
33. DINI, G., FAILLI, F. and SANTOCHI, M., 2001, A disassembly planning software system for the optimisation of recycling processes. Production Planning and Control, 12(1), 2-12.
34. DUTTA, D. and Woo, T.C., 1995, Algorithm for multiple disassembly and parallel assemblies. Journal of Engineering for Industry, 117, 102-109.
35. ENG, T. H., LING, Z. K., OLSON, W. and McLEAN, C., 1999, Feature-based assembly modeling and sequence generation. Computers and Industrial Engineering, 36(1), 17-33.
36. ERDOS, G. and XIROUCHAKIS, P., 1999, Extended Petri-net modeling for re-manufacturing line simulation. Proceedings of 1999 IEEE Conference on Ecodesign, pp. 83-88.
37. ERDOS, G., KIS, T. and XIROUCHAKIS, P., 2001, Modelling and evaluating product end-of-life options. International Journal of Production Research, 39(6), 1203-1220.
38. FAILLI, F. and DINI, G., 2001, Optimization of disassembly sequences for recycling of end-of-life products by using a colony of ant-like agents. In: G. Hoos, J. Hartmans and J. van Leeuwen (eds), Lecture Notes in Computer Science (Berlin: Springer), Volume 2070, pp. 632-639.
39. FOUDA, P., DANLOY, J., L'ÉGLISE, T., DE LIT, P., REKIEK, B. and DELCHAMBRE, A., 2001a, A heuristic to generate a precedence graph between components for a product family. Proceedings of 4th IEEE International Symposium on Assembly and Task Planning, pp. 43-48.
40. FOUDA, P., DE LIT, P., REKIEK, B. and DELCHAMBRE, A., 2001b, Generation of precedence graphs for a product family using a disassembly approach. Proceedings of 4th IEEE International Symposium on Assembly and Task Planning, pp. 226-231.
41. GADH, R., SRINIVASAN, H., SHYAMSUNDAR, N. and FIGUEROA, R., 1998, Virtual disassembly - a software tool for developing product dismantling and maintenance systems. Proceedings of 1998 IEEE Annual Reliability and Maintainability Symposium, pp. 120-125.
42. GARCÍA, M. A., LARRÉ, A., LÓPEZ, B. and OLLER, A., 2000, Reducing the complexity of geometric selective disassembly. Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 1474-1479.
43. GEIGER, D. and ZUSSMAN, E., 1996, Probabilistic reactive disassembly planning. CIRP Annals: Manufacturing Technology, 45(1), 49-52.
44. GOTTIPOLU, R. B. and GHOSH, K., 1997, Representation and selection of assembly sequences in computer-aided assembly process planning. International Journal of Production Research, 35(12), 3447-3465.
45. Gu, P. and YAN, X., 1995, CAD-directed automatic assembly sequence planning. International Journal of Production Research, 33(11), 3069-3100.
46. GÜNGÖR, A. and GUPTA, S. M., 1997, An evaluation methodology for disassembly processes. Computers and Industrial Engineering, 33(1-2), 329-332.
47. GÜNGÖR, A. and GUPTA, S. M., 1998, Disassembly sequence planning for products with defective parts in product recovery. Computers and Industrial Engineering, 35(1-2), 161-164.
48. GÜNGÖR, A. and GUPTA, S. M., 1999, Issues in environmentally conscious manufacturing and product recovery: a survey. Computers and Industrial Engineering, 36, 811-853.
49. GÜNGÖR, A. and GUPTA, S. M., 2001a, Disassembly sequence plan generation using a branch-and-bound algorithm. International Journal of Production Research, 39(3), 481-509.
50. GÜNGÖR, A. and GUPTA, S. M., 2001b, A solution approach to the disassembly line balancing problem in the presence of task failures. International Journal of Production Research, 39(7), 1427-1467.
51. GUPTA, S. M. and TALEB, K. N., 1994, Scheduling disassembly. International Journal of Production Research, 3(8), 1857-1866.
52. GUPTA, S. M. and McLEAN, C. R., 1996, Disassembly of products. Computers and Industrial Engineering, 31(1-2), 225-228.
53. GUPTA, S. M. and VEERAKAMOLMAL, P., 2001, Aggregate planning for end-of-life products. In: J. Sarkis (ed.), Greener Manufacturing and Operations: from Design to Delivery and Back (Sheffield, UK: Greenleaf Publishing), chapter 14, pp. 205-222.
54. HARJULA, T., RAPOZA, B., KNIGHT, W. A. and BOOTHROYD, G., 1996, Design for disassembly and the environment. CIRP Annals, 45(1), 109-114.
55. HEEMSKERK, C. J. M., 1990, A concept for computer aided process planning for flexible assembly. PhD Thesis, Delft, NL: Technische Universiteit Delft.
56. HOMEM DE MELLO, L. S. and SANDERSON, A. C., 1990, And/or graph representation of assembly plans. IEEE Transactions on Robotics and Automation, 6(2), 188-189.
57. HOMEM DE MELLO, L. S. and SANDERSON, A. C., 1991, A correct and complete algorithm for the generation of mechanical assembly sequences. IEEE Transactions on Robotics and Automation, 7(2), 228-240.
58. HOSHINO, T., YURA, K. and HITOMI, K., 1995, Optimization analysis for recycle-oriented manufacturing systems. International Journal of Production Research, 33(8), 2069-2078.
59. Hsu, W., LEE, C. S. G. and Fu, S. F., 1992, Feedback evaluation of assembly plans. Proceedings of 1992 IEEE International Conference on Robotics and Automation, pp. 2419-2424.
60. HUANG, H. H., WANG, M. H. and JOHNSON, M. R., 2000, Disassembly sequence generation using a neural network approach. Journal of Manufacturing Systems, 19(2), 73-82.
61. HUANG, Y. F. and LEE, C. S. G., 1989, Precedence knowledge in feature mating operation assembly planning. Proceedings of 1989 IEEE International Conference on Robotics and Automation, pp. 216-221.
62. HUANG, Y. M. and HUANG, C. T., 2002, Disassembly matrix for disassembly processes of products. International Journal of Production Research, 40(2), 255-273.
63. INABA, A., SUZUKI, T. and OKUMA, S., 1994, Feasibility study of disassembly task based on topological operations. Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 2131-2138.
64. JIMÉNEZ, P. and TORRAS, C., 2000, An efficient algorithm for searching implicit AND/OR graphs with cycles. Artificial intelligence, 124(1), 1-30.
65. JOHNSON, M. R. and WANG, M. H., 1995, Planning product disassembly for material recovery opportunities. International Journal of Production Research, 33(11), 3119-3142.
66. JOHNSON, M. R. and WANG, M. H., 1998, Economical evaluation of disassembly operations for recycling, manufacturing and reuse. International Journal of Production Research, 36(12), 3227-3252.
67. JOVANE, F. and SEMERARO, Q., 1997, Computer-aided disassembly planning as a support to product redesign. Proceedings of 4th CIRP International Seminar on Life Cycle Engineering, pp. 388-399.
68. JOVANE, F., SEMERARO, Q. and ARMILLOTTA, A., 1998, On the use of the profit rate function in disassembly process planning. The Engineering Economist, 43(4) 309-330.
69. KAEBERNICK, H., O'SHEA, B. and GREWAL, S. S., 2000, Method for sequencing the disassembly of products. CIRP Annals: Manufacturing technology, 49(1), 13-16.
70. KANAI, S., SASAKI, R. and KISHINAMI, T., 1999, Representation of product and process for planning disassembly, shredding, and material sorting based on graphs. Proceedings of 1999 IEEE International Symposium on Assembly and Task Planning, pp. 123-128.
71. KANEHARA, T., SUZUKI, T., INABA, A. and OKUMA, S., 1993, On algebraic and graph structural properties of assembly Petri net. Proceedings of 1993 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 2286-2293.
72. KANG, J. G., LEE, D. H., XIROUCHAKIS, P. and PERSSON, J. G., 2001, Parallel disassembly sequencing with sequence-dependent operation times. Annals of the CIRP, 50(1), 343-346.
73. KIM, G. J. and BEKEY, G. A., 1996, Interleaving assembly planning and design. IEEE Transactions on Robotics and Automation, 12(2), 246-251.
74. KIRITSIS, D. and PORCHET, M., 1996, A generic Petri net model for dynamic process planning and sequence optimisation. Advances in Engineering Software, 25, 61-71.
75. KIRITSIS, D., NEUENDORF, K. P. and XIROUCHAKIS, P., 1999, Petri net techniques for process planning cost estimation. Advances in Engineering Software, 30, 375-387.
76. KIZILKAYA, E. and GUPTA, S. M., 1998, Material flow control and scheduling in a disassembly environment. Computers and Industrial Engineering, 35(1-2), 93-96.
77. KNIGHT, W.A., 1996, Software tools to evaluate cost benefits and environmental impact of designing for disassembly, recycling and the environment. Design for the 21st Century Technical Papers, Regional Technical Conference, Society of Plastics Engineers, Brookfield CT, pp. 27-38.
78. KNIGHT, W. A. and SODHI, M., 2000, Design for bulk recycling: analysis of materials separation. CIRP Annals: Manufacturing Technology, 49(1), 83-86.
79. KONGAR, E. and GUPTA, S. M., 2001, Multi-objective optimization of lot size balancing for multi-products selective disassembly. In: M. Koksalan and S. Zionts (eds) Multiple Criteria Decision Making in the New Millennium, Lecture Notes in Economics and Mathematical Systems (Berlin: Springer), volume 507, pp. 338-347.
80. KONGAR, E. and GUPTA, S. M., 2002, A multi-criteria decision making approach for disassembly-to-order systems, Journal of Electronics Manufacturing, 11(2), 171-183.
81. KRIKKE, H. R., VAN HARTEN, A. and SCHUUR, P. C., 1998, On a medium term product recovery and disposal strategy for durable assembly products. International Journal of Production Research, 36(1), 111-139.
82. KRIKKE, H. R., VAN HARTEN, A. and SCHUUR, P. C., 1999, Business case Roteb: recovery strategies for monitors. Computers and Industrial Engineering, 36(4), 739-757.
83. KROLL, E., 1993, Modelling and reasoning for computer-based assembly planning. In: A. Kusiak (ed.), Concurrent Engineering: Automation, Tools, and Techniques (New York: Wiley-Interscience), chapter 8, pp. 177-205.
84. KROLL, E., 1996, Application of work-measurement analysis to product disassembly for recycling. Concurrent Engineering, 4(2), 149-156.
85. KROLL, E., BEARDSLEY, B. and PARULIAN, A., 1996, A methodology to evaluate ease of disassembly for product recycling. IEE Transactions, 28, 837-845.
86. KROLL, E. and CARVER, B. S., 1999, Disassembly analysis through time estimation and other metrics. Robotics and Computer Integrated Manufacturing, 15, 191-200.
87. KUNICA, Z. and VRANJEŠ, B., 1999, Towards automatic generation of plans for automated assembly. International Journal of Production Research, 37(8), 1817-1836.
88. KUO, T. C., Yu, S. Y. and ZHANG, H. C., 1997, Disassembly planning analysis for electromechanical products. ASME Design Engineering Publication, 94, 225-241.
89. KUO, T. C., ZHANG, H. C. and HUANG, S. H., 2000, Disassembly analysis for electromechanical products: a graph-based heuristic approach. International Journal of Production Research, 38(5), 993-1007.
90. KUO, T. C., 2000, Disassembly sequence and cost analysis for electromechanical products. Robotics and Computer Integrated Manufacturing, 16, 43-54.
91. KUO, T. C., HUANG, S. H. and ZHANG, H. C., 2001, Design for manufacture and design for 'X': concepts, applications, and perspectives, Computers and Industrial Engineering, 41, 241-260.
92. LAMBERT, A. J. D., 1997, Optimal disassembly of complex products. International Journal of Production Research, 35(9), 2509-2523.
93. LAMBERT, A. J. D., 1999a, Linear programming in disassembly/clustering sequence generation. Computers and Industrial Engineering, 36, 723-738.
94. LAMBERT, A. J. D., 1999b, Disassembly process modelling: problems and solutions concerning their adaptation to practice. Proceedings of 15th International Conference on Computer-Aided Production Engineering CAPE'99, Durham, UK, pp. 485-492.
95. LAMBERT, A. J. D., 1999c, Optimal disassembly sequence generation for combined material recycling and part reuse. Proceedings of 1999 IEEE International Symposium on Assembly and Task Planning, pp. 146-151.
96. LAMBERT, A. J. D., 2000, Optimum disassembly sequence generation. Proceedings of 2000 SPIE Conference of Environmentally Conscious Manufacturing, pp. 56-67.
97. LAMBERT, A. J. D., 2001a, Automatic determination of transition matrices in optimal disassembly sequence generation. Proceedings of 4th IEEE International Symposium on Assembly and Task Planning, pp. 220-225.
98. LAMBERT, A. J. D., 2001b, Disassembly aimed at product remanufacturing. Proceedings of ASME 21st Computers and Information in Engineering Conference, DETC2001/CIE-21252, Proceedings on CD-ROM, 6p.
99. LAMBERT, A. J. D., 2001c, Life-cycle chain analysis, including recycling. In: J. Sarkis (ed.), Greener Manufacturing and Operations: from Design to Delivery and Back (Sheffield, UK: Greenleaf Publishing) chapter 2, pp. 36-55.
100. LAMBERT, A. J. D., 2002, Determining optimum disassembly sequences in electronic equipment. Computers and Industrial Engineering, 43, 553-575.
101. LAMBERT, A. J. D. and GUPTA, S. M., 2002, Demand-driven disassembly optimisation for electronic consumer goods. Journal of Electronics Manufacturing, 11(2), 121-135.
102. LAMBERT, A. J. D. and STOOP, M. L. M., 2001, Processing of discarded household refrigerators: lessons from the Dutch example. Journal of Cleaner Production, 9, 243-252.
103. LAPERRIÈRE, L. and EL MARAGHY, H. A., 1992, Planning of products assembly and disassembly. CIRP Annals, 41(1), 5-9.
104. LAPERRIÈRE, L. and EL MARAGHY, H.A., 1994, Assembly sequences planning for simultaneous engineering applications. International Journal of Advanced Manufacturing Technology, 9, 231-244.
105. LAPERRIÈRE, L. and EL MARAGHY, H. A., 1996, GAPP: a generative assembly process planner. Journal of Manufacturing Systems, 15(4), 282-293.
106. LAPERRIÈRE, L. and LAVOIE, A., 1997, Evaluating subassembly stability using stability directed subgraphs. International Journal of Computer Applications in Technology, 10(5/6), 348-360.
107. LEE, S., 1989, Disassembly planning based on subassembly extraction. Proceedings of 3rd ORSA/TIMS Conference on Flexible Manufacturing Systems: Operations Research Models and Applications, pp. 383-388.
108. LEE, S. and SHIN, Y. G., 1990a, A cooperative planning system for flexible assembly. Proceedings of Rensselaer's 2nd International Conference on Computers and Intelligent Manufacturing, pp. 306-313.
109. LEE, S. and SHIN, Y. G., 1990b, Assembly planning based on subassembly extraction. Proceedings of 1990 IEEE Conference on Robotics and Automation, pp. 1606-1611.
110. LEE, Y. Q. and KUMARA, S. R. T., 1992, Individual and group disassembly sequence generation through freedom and interference spaces. Journal of Design and Manufacturing, 2, 143-154.
111. LEE, S., 1992, Backward assembly planning with assembly cost analysis. Proceedings of 1992 IEEE International Conference on Robotics and Automation, pp. 2382-2391.
112. LEE, K. and GADH, R., 1995, Computer aided design for disassembly: a destructive approach. Proceedings of 1995 ASME International Mechanical Engineering Congress, 1, 237-249.
113. LEE, K. M. and BAILEY-VAN KUREN, M. M., 1997, Supervisory control of an automated disassembly workcell based on blocking topology. Proceedings of 1997 IEEE International Conference on Robotics and Automation, pp. 1523-1528.
114. LEE, K. and GADH, R., 1998, Destructive disassembly to support virtual prototyping. IEE Transactions, 30(10), 959-972.
115. LEE, S. and MORADI, H., 1999, Disassembly sequencing and assembly sequence verification using force flow networks. Proceedings of 1999 IEEE International Conference on Robotics and Automation, pp. 2762-2767.
116. LEE, K. M. and BAILEY-VAN KUREN, M. M., 2000, Modeling and supervisory control of a disassembly automation workcell based on blocking topology. IEEE Transactions on Robotics and Automation, 16(1), 67-77.
117. LEE, D. H., KANG, J. G. and XIROUCHAKIS, P., 2001a, Disassembly planning and scheduling: review and further research. Proceedings of Institute of Mechanical Engineers, 215(5), 695-710.
118. LEE, S. G., LYE, S. W. and KHOO, M. K., 2001b, A multi-objective methodology for evaluating product end-of-life options and disassembly. International Journal of Advanced Manufacturing Technology, 18, 148-156.
119. LI, W., ZHANG, C., WANG, H. P. B. and AWONIYI, S. A., 1995, Design for disassembly analysis for environmentally conscious design and manufacturing. Proceedings of ASME International Mechanical Engineering Congress and Exposition, 2, 969-976.
120. LIN, A. C. and CHANG, T. C., 1993, An integrated approach to automated assembly planning for three-dimensional mechanical products. International Journal of Production Research, 31(5), 1201-1227.
121. LOU, S., LEU, J. and JORJANI, S., 1996, Comparing different disassembly strategies. Proceedings of 1996 IEEE International Symposium on Electronics and the Environment, pp. 73-777.
122. LYE, S. W., LEE, S. G. and KHOO, M. K., 2000, An algorithm for optimising the servicing of products with constrained, multiple defects. International Journal of Production Research, 38(10), 2185-2200.
123. MARTINEZ, M., PHAM, V. H. and FAVREL, J., 1997, Dynamic generation of disassembly sequences. Proceedings of 6th IEEE International Conference on Emerging Technologies and Factory Automation, pp. 177-182.
124. MASCLE, C., 1998, Automatic a priori, a posteriori or appropriate determination of subassemblies. International Journal of Production Research, 36(4), 1001-1021.
125. MASCLE, C., 1999, Feature-based assembly model and multi-agents system structure for computer-aided assembly. Proceedings of 1999 IEEE International Symposium on Assembly and Task Planning, pp. 8-13.
126. MASCLE, C. and BALASOIU, B. A., 2001, Disassembly-assembly sequencing using feature-based life-cycle model. Proceedings of 2001 IEEE International Symposium on Assembly and Task Planning, pp. 31-36.
127. MATTIKALI, R. S., KHOSLA, P. K. and Xu, Y. S., 1990, Subassembly identification and motion generation for assembly: a geometric approach. Proceedings of 1990 IEEE International Conference on Systems Engineering, pp. 399-403.
128. MATTIKALI, R., BARAFF, D. and KHOSLA, P., 1994, Finding all gravitationally stable orientations of assemblies. Proceedings of 1994 IEEE International Conference on Robotics and Automation, pp. 251-257.
129. MEACHAM, A., UZSOY, R. and VENKATADRI, U., 1999, Optimal disassembly configurations for single and multiple products. Journal of Manufacturing Systems, 18(5), 311-322.
130. MELNYK, S. A., SROUFE, R. P., MONTABON, F. L. and HINDS, T. J., 2001, Green MRP: identifying the material and environmental impacts of production schedules. International Journal of Production Research, 39(8), 1559-1573.
131. MILLER, J. M. and STOCKMAN, G. C., Precedence constraints and tasks: how many task orderings?. Proceedings of 1990 IEEE International Conference on Systems Engineering, pp. 408-411.
132. MINAMI, S., PAHNG, K. F., JAKIELA, M. J. and STRIVASTAVA, A., 1995, A cellular automata representation for assembly simulation and sequence generation. Proceedings of 1995 IEEE International Symposium on Assembly and Task Planning, pp. 56-65.
133. MOK, S. M., Wu, C. H. and LEE, D. T., 2000, A system for analyzing automatic assembly and disassembly operations. Proceedings of 2000 IEEE International Conference on Robots and Automation, 4, 3695-3700.
134. MOK, S. M., Wu, C. H. and LEE, D. T., 2001, Modeling automatic assembly and disassembly operations for virtual manufacturing. IEEE Transactions on Systems, Man, and Cybernetics, Part A, 31(3), 223-232.
135. MOORE, K. E. and GUPTA, S. M., 1996, Petri net models of flexible and automated manufacturing systems: a survey. International Journal of Production Research, 34, 3001-3035.
136. MOORE, K. E., GÜNGÖR, A. and GUPTA, S. M., 1998a, Disassembly process planning using Petri nets. Proceedings of 1998 IEEE Conference on Electronics and the Environment, 88-93.
137. MOORE, K. E., GÜNGÖR, A. and GUPTA, S. M., 1998b, A Petri net approach to disassembly process planning. Computers and Industrial Engineering, 35(1-2), 165-168.
138. MOORE, K. E., GÜNGÖR, A. and GUPTA, S. M., 1998c, Disassembly Petri net generation in the presence of XOR precedence relationships. Proceedings of 1998 IEEE International Conference on Systems, Man, and Cybernetics, pp. 13-18.
139. MOORE, K. E., GÜNGÖR, A. and GUPTA, S. M., 2001, Petri net approach to disassembly process planning for products with complex AND/OR precedence relationships. European Journal of Operations Research, 135, 428-449.
140. MOYER, L. K. and GUPTA, S. M., 1997, Environmental concerns and recycling/disassembly efforts in the electronics industry. Journal of Electronics Manufacturing, 7(1), 1-22.
141. MURAYAMA, T., OBA, F. and ABE, S., 1994, Assembly partitioning by genetic algorithm for generating assembly sequences efficiently. Advancement of Intelligent Production, pp. 695-700.
142. MURAYAMA, T. and OBA, F., 1997, Disassembly/assembly path search reusing solutions. Proceedings of 6th IEEE International Conference on Emerging Technology and Factory Automation, pp. 183-188.
143. MURAYAMA, T., KAGAWA, K. and OBA, F., 1999, Computer-aided redesign for improving recyclability. Proceedings of 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing, pp. 746-751.
144. MURAYAMA, T., OBA, F., ABE, S. and YAMAMICHI, Y., 2001, Disassembly sequence generation using information entropy and heuristics. Proceedings of 4th IEEE International Symposium on Assembly and Task Planning, pp. 208-213.
145. NAVIN-CHANDRA, D., 1994, The recovery problem in product design. Journal of Engineering Design, 5(1), 65-86.
146. NAVIN-CHANDRA, D. and BANSAL, R., 1994, The recovery problem: the tradeoff between designing for environmental compatibility and commercial viability. International Journal of Environmentally Conscious Design and Manufacturing, 3(2), 67-71.
147. ONG, N. S. and WONG, Y. C., 1999, Automatic subassembly detection from a product model for disassembly sequence generation. International Journal of Manufacturing Technology, 15, 425-431.
148. ONOZUKA, M., KANAI, S. and TAKAHASHI, H., 1994, Computer aided evaluation of assembly sequences based on the analysis of methods time measurement and design for assembly. Advances in Intelligent Production, 707-712.
149. O'SHEA, B., GREWAL, S. S. and KAEBERNICK, H., 1998, State of the art literature survey on disassembly planning. Concurrent Engineering, 6(4), 345-357.
150. O'SHEA, B., KAEBERNICK, H., GREWAL, S. S., PERLEWITZ, H., MÜLLER, K. and SELIGER, G., 1999, Method for automatic tool selection for disassembly planning. Assembly Automation, 19(1), 47-54.
151. O'SHEA, B., KAEBERNICK, H. and GREWAL, S. S., 2000, Using a cluster graph representation of products for application in the disassembly planning process. Concurrent Engineering, 8(3), 158-170.
152. OVERBY, C. M., 1979, Product design for reliability and life extension. Proceedings of 1979 ASEE Annual Conference (Toronto: ASEE Press).
153. PAN, L. and ZEID, I., 2001, A knowledge base for indexing and retrieving disassembly plans. Journal of Intelligent Manufacturing, 12, 77-94.
154. PANISSET, B. D. 1988, MRP-2 for repair/refurbish industries. Production and Inventory Management Journal, Issue IV, 12-15.
155. PENEV, K. D. and DE RON, A. J., 1996, Determination of a disassembly strategy. International Journal of Production Research, 34(2), 495-506.
156. PNUELI, Y. and ZUSSMAN, E., 1997, Evaluating the end-of-life value of a product and improving it by redesign. International Journal of Production Research, 35(4), 921-942.
157. PRENTING, T. O. and BATTAGLIN, R. M., 1964, The precedence diagram: a tool for analysis in assembly line balancing. Journal of Industrial Engineering, 15(4), 208-213.
158. PU, P., 1992, An assembly sequence generation algorithm using case-based search techniques. Proceedings of 1992 IEEE International Conference on Robotics and Automation, pp. 2425-2430.
159. QUIAN, W. H. and PAGELLO, E., 1994, On the scenario and heuristics of disassemblies. Proceedings of 1994 IEEE International Conference on Robotics and Automation, pp. 264-271.
160. RAJAN, V. N. and NOF, S. Y., 1996, Minimal precedence constraints for integrated assembly and execution planning. IEEE Transactions on Robotics and Automation, 12(2), 175-186.
161. ROCHA, J. and RAMOS, C., 1995, Plan representation and generation for manufacturing tasks. Proceedings of 1995 IEEE International Symposium on Assembly and Task Planning, pp. 22-27.
162. SALOMONSKI, N. and ZUSSMAN, E., 1999, On-line predictive model for disassembly process planning adaptation. Robotics and Computer Integrated Manufacturing, 15, 211-220.
163. SANDBORN, P. A. and MURPHY, C. F., 1999, A model for optimizing the assembly and disassembly of electronic systems. IEEE Transactions on Electronics Packaging Manufacturing, 22(2), 105-117.
164. SCHOLL, A., 1999, Balancing and Sequencing of Assembly Lines. (Heidelberg, D: Physica-Verlag).
165. SCHOLZ-REITER, B. and SCHARKE, H., 1997, Implementation and testing of a reactive disassembly planner. Proceedings of 4th CIRP International Seminar on Life Cycle Engineering, pp. 379-387.
166. SCHOLZ-REITER, B., SCHARKE, H. and HUCHT, A., 1999, Flexible robot-based disassembly cell for obsolete TV-sets and monitors. Robotics, Computers and Integrated Manufacturing, 15, 247-255.
167. SCHWEIKARD, A. and SCHWARZER, F., 1997, General translational assembly planning. Proceedings of 1997 IEEE International Conference on Robotics and Automation, pp. 612-619.
168. SEO, K. K., PARK, J. H. and JANG, D. S., 2001, Optimal disassembly sequence using genetic algorithms considering economic and environmental aspects. International Journal of Advanced Manufacturing Technology, 18, 371-380.
169. SEOW, K. T. and DEVANATHAN, R., 1994, A temporal framework for assembly sequence representation and analysis. IEEE Transactions on Robotics and Automation, 10(2), 220-229.
170. SHIN, C. K. and CHO, H. S., 1994, On the generation of robotic assembly sequences based on separability and assembly motion stability. Robotica, 12, 7-15.
171. SHYAMSUNDAR, N. and GADH, R., 1996, Selective disassembly of virtual prototypes. Proceedings of 1996 IEEE International Conference on Systems, Man, and Cybernetics, pp. 3159-3164.
172. SHYAMSUNDAR, N., ASHAI, Z. and GADH, R., 1998, Geometry-based metric formulation and methodology to support virtual design for disassembly. Engineering Design and Automation, 4(1), 13-26.
173. SIDDIQUE, Z. and ROSEN, D. W., 1997, A virtual prototyping approach to product disassembly reasoning. Computer-Aided Design, 29(12), 847-860.
174. SODHI, M. and KNIGHT, W. A., 1998, Product design for disassembly and bulk recycling. CIRP Annals: Manufacturing Technology, 47(1), 115-118.
175. SODHI, M., YOUNG, J. and KNIGHT, W. A., 1999, Modelling material separation processes in bulk recycling. International Journal of Production Research, 37(10), 2239-2252.
176. SODHI, M. and REIMER, B., 2001, Models for recycling electronics end-of-life products. OR Spektrum, 23, 97-115.
177. SPENGLER, T., PÜCHERT, H., PENKUHN, T. and RENTZ, O., 1997, Environmental integrated production and recycling management. European Journal of Operational Research, 97, 308-326.
178. SPICER, A. and WANG, M. H., 1997, Environmental design industrial template (EDIT): a software tool for analysis of product retirement. Journal of Cleaner Production, 5(3), 193-198.
179. SRINIVASAN, H., SHYAMSUNDAR, N. and GADH, R., 1997a, A virtual disassembly tool to support environmentally conscious product design. Proceedings 1997 IEEE International Symposium on Electronics and the Environment, 5, 7-12.
180. SRINIVASAN, H., SHYAMSUNDAR, N. and GADH, R., 1997b, A framework for virtual disassembly analysis. Journal of Intelligent Manufacturing, 8(4), 277-295.
181. SRINIVASAN, H. and GADH, R., 1998a, Complexity reduction in geometric selective disassembly using the wave propagation abstraction. Proceedings of 1998 IEEE International Conference on Robotics and Automation, 2, 1478-1483.
182. SRINIVASAN, H. and GADH, R., 1998b, A geometric algorithm for single selective disassembly using the wave propagation abstraction. Computer-Aided Design, 30(8), 603-613.
183. SRINIVASAN, H., FIGUEROA, R. and GADH, R., 1999, Selective disassembly for virtual prototyping as applied to de-manufacturing. Robotics and Computer-Integrated Manufacturing, 15, 231-245.
184. SRINIVASAN, H. and GADH, R., 2000, Efficient geometric disassembly of multiple components from an assembly using wave propagation. Journal of Mechanical Design, 122, 179-184.
185. SRINIVASAN, H. and GADH, R., 2002, A non-interfering selective disassembly sequence for components with geometric constraints. IIE Transactions, 34, 349-361.
186. STADZISZ, P. C. and HENRIOUD, J. M., 1998, An integrated approach for the design of multi-product assembly systems. Computers in Industry, 36, 21-29.
187. SUBRAMANI, A. K. and DEWHURST, P., 1991, Automatic generation of product disassembly sequences. CIRP Annals, 40(1), 115-118.
188. SUNDARAM, S., REMMLER, I. and AMATO, N. M., 2001, Disassembly sequencing using a motion planning approach. Proceedings of 2001 IEEE International Conference on Robotics and Automation, 1475-1480.
189. SUZUKI, T., ZANMA, T., INABA, A. and OKUMA, S., 1996, Learning control of disassembly Petri net - an approach with discrete event system theory. Proceedings of 1996 IEEE International Conference on Robotics and Automation, pp. 184-191.
190. SWAMINATHAN, A. and BARBER, K. S., 1996, An experience-based assembly sequence planner for mechanical assemblies. IEEE Transactions on Robotics and Automation, 12(2), 252-267.
191. TAKEYAMA, H., SEKIGUCHI, H., KOJIMA, T., INOUE, K. and HONDA, T., 1983, Study on automatic determination of assembly sequence. CIRP Annals, 32(1), 371-374.
192. TALEB, K. N., GUPTA, S. M. and BRENNAN, L., 1997, Disassembly of complex product structures with parts and materials commonality. Production Planning and Control, 8(3), 255-269.
193. TALEB, K. N. and GUPTA, S. M., 1997, Disassembly of multiple product structures. Computers and Industrial Engineering, 32(4), 949-961.
194. TANAKA, M., IWAMA, K. and WATANABE, T., 1996, A method of generating assembly plans by assembly matrices. Proceedings of ASME Japan/USA Symposium on Flexible Automation, 2, 803-806.
195. TANG, Y., ZHOU, M. C., ZUSSMAN, E. and CAUDILL, R., 2000a, Disassembly modelling, planning, and application: a review. Proceedings of 2000 IEEE International Conference on Robotics and Automation, 3, 2197-2202.
196. TANG, Y., ZHOU, M. C. and CAUDILL, R. J., 2000b, An integrated approach to disassembly planning and demanufacturing operation. Proceedings of 2000 IEEE International Symposium on Electronics and the Environment, pp. 354-359.
197. THOMAS, V., CAUDILL, R. and BADWE, D., 1998, Marginal emissions and variation across models: life-cycle assessment of a television. Proceedings of 1998 IEEE International Symposium on Electronics and the Environment, pp. 48-53.
198. TIWARI, M. K., SINHA, N., KUMAR, S., RAI, R. and MUKHOPADHYAY, S. K., 2001, A Petri net based approach to determine the disassembly strategy of a product. International Journal of Production Research, 40, 1113-1129.
199. TOUZANNE, F., HENRIOUD, J. M. and PERRARD, C., 2001, Method of disassembly sequence generation for recycling system design. Proceedings of 4th IEEE International Symposium on Assembly and Task Planning, pp. 458-463.
200. TSE, Y. J. and LIOU, L. C., 2000, Integrating assembly and machining planning using graph-based representation models. International Journal of Production Research, 38(12), 2619-2641.
201. UCHIYAMA, N., ARAI, E. and IGOSHI, M., 1994, Generation of mechanical assembly sequences considering different evaluation viewpoints. In: E. Usui (ed.), Advancement of Intelligent Production, pp. 701-706.
202. UZSOY, R., 1997, Production planning for companies with product recovery and remanufacturing capability. Proceedings of 1997 IEEE International Symposium on Electronics and the Environment, pp. 285-289.
203. VEERAKAMOLMAL, P. and GUPTA, S. M., 1998a, Design of an integrated component recovery system. Proceedings of 1998 IEEE Symposium on Electronics and the Environment, pp. 264-269.
204. VEERAKAMOLMAL, P. and GUPTA, S. M., 1998b, High mix/low-volume batch of electronic equipment disassembly. Computers and Industrial Engineering, 35(1-2), 65-68.
205. VEERAKAMOLMAL, P. and GUPTA, S. M., 1998c, Optimal analysis of lot-size balancing for multiproducts selective disassembly. International Journal of Flexible Automation and Integrated Manufacturing, 6(3&4), 245-269.
206. VEERAKAMOLMAL, P. and GUPTA, S. M., 1999, Analysis of design efficiency for the disassembly of modular electronic products. Journal of Electronics Manufacturing, 9(1), 79-95.
207. VEERAKAMOLMAL, P. and GUPTA, S. M., 2000, Design for disassembly, reuse and recycling. In L. Goldberg (ed), Green Electronics/Green Manufacturing: Environmentally Responsible Engineering (Butterworth-Heinemann Newnes), chapter 5, pp. 69-82.
208. VEERAKAMOLMAL, P. and GUPTA, S. M., 2002, A case-based reasoning approach for automating disassembly process planning. Journal of Intelligent Manufacturing, 13(1), 47-60.
209. VENUVINOD, P. K., 1993, Automated analysis of 3-D polyhedral assemblies: assembly directions and sequences. Journal of Manufacturing Systems, 12(3), 246-252.
210. VISWANATHAN, S. and ALLADA, V., 1999a, A framework for the flexible grouping of products for disassembly. Journal of Electronics Manufacturing, 9(1), 53-66.
211. VISWANATHAN, S. and ALLADA, V., 1999b, Value-based product structure evaluation for disassembly. Proceedings of 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing, pp. 778-783.
212. VISWANATHAN, S. and ALLADA, V., 2001, Configuration analysis to support product redesign for end-of-life disassembly. International Journal of Production Research, 39(8), 1733-1753.
213. VUJOSEVIC, R., RASKAR, R., YETEKURI, N. V., JOTHISHANKAR, M. C. and JUANG, S. H., 1995, Simulation, animation, and analysis of design disassembly for maintainability analysis. International Journal of Production Research, 33(11), 2999-3022.
214. VUJOSEVIC, R., 1995, Maintainability analysis in concurrent engineering of mechanical systems. Concurrent Engineering, 3(1), 61-73.
215. WAARTS, J. J., BONESCHANSCHER, N. and BRONSVOORT, W. F., 1992, A semi-automatic assembly sequence planner. Proceedings of 1992 IEEE International Conference on Robotics and Automation, pp. 2431-2438.
216. WANG, J. P. and ALLADA, V., 1998, Serviceability evaluation using weighted fuzzy attributes. Engineering Design Automation, 4(3), 189-201.
217. WANG, J. P. and ALLADA, V., 2000, Hierarchical fuzzy neural network-based serviceability evaluation. International Journal of Agile Management Systems, 2(2), 130-141.
218. WANG, M. H. and JOHNSON, M. R., 1995, Design for disassembly and recyclability: a concurrent engineering approach. Concurrent Engineering, 3(2), 131-134.
219. WESTKÄMPER, E., FELDMANN, K., REINHART, G. and SELIGER, G., 1999, Integrated development of assembly and disassembly. CIRP Annals, 48(2), 557-565.
220. WIENDAHL, H. P., SELIGER, G., PERLEWITZ, H. and BÜRKNER, S., 1999, A general approach to disassembly planning and control. Production Planning and Control, 10(8), 718-726.
221. WILSON, R. H. and RIT, J. F., 1990, Maintaining geometric dependencies in an assembly planner. Proceedings of 1990 IEEE International Conference on Robotics and Automation, pp. 890-895.
222. WILSON, R. H. and SCHWEIKARD, A., 1992, Assembling polyhedra with single translations, Proceedings of 1992 IEEE International Conference on Robotics and Automation, pp. 2392-2397.
223. WILSON, R. H., 1995, Minimising user queries in interactive assembly planning. IEEE Transactions on Robotics and Automation, 11(2), 308-312.
224. WOLTER, J. D., 1990, A constraint-based approach to planning with subassemblies. Proceedings of 1990 IEEE International Conference on Systems Engineering, 412-415.
225. WOLTER, J. D., 1991, A combinatorial analysis of enumerative data structures for assembly planning. Proceedings of 1991 IEEE International Conference on Robotics and Automation, pp. 611-618.
226. WOLTER J. D., CHAKRABARTY, S. and TSAO, J., 1992a, Mating constraint languages for assembly sequence planning. Proceedings of 1992 IEEE International Conference on Robotics and Automation, pp. 2367-2374.
227. WOLTER, J. D., 1992b, A combinatorial analysis of enumerative data structures for assembly planning. Journal of Design and Manufacturing, 2(2), 93-104.
228. WOLTER, J. D., 1995, Assembly sequence planning bibliography, internet source, http://www.cs.tamu.edu/research/robotics/Wolter/asp/bib.html
229. WOO, T. C. and DUTTA, D., 1991, Automatic disassembly and total ordering in three dimensions. Journal of Engineering for Industry, 113, 207-213.
230. Wu, T. and O'GRADY, P., 1999, A concurrent engineering approach to design for assembly. Concurrent Engineering, 7(3), 231-243.
231. XIROUCHAKIS, P. and KIRITSIS, D., 1997, Petri net modeling for disassembly process planning. ASME Conference on Concurrent Product Design and Environmentally Conscious Manufacturing, MED Vol. 5, 255-267.
232. YAN, X. and GU, P., 1995, Assembly/disassembly sequence planning for life-cycle cost estimation. ASME Manufacturing Science and Engineering, pp. 935-956.
233. YE, N. and URZI, D. A., 1996, Heuristic rules and strategies of assembly planning: experiment and implications in the design of assembly decision support system. International Journal of Production Research, 34(8), 2211-2228.
234. YOKOTA, K. and BROUGH, D. R., 1992, Assembly/disassembly sequence planning. Assembly Automation, 12(3), 31-38.
235. ZEID, I., GUPTA, S. M. and BARDASZ, T., 1997, A case-based reasoning approach to planning for disassembly. Journal of Intelligent Manufacturing, 8(2), 97-106.
236. ZHA, X. F. and LIM, S. Y. E., 2000, Assembly/disassembly task planning and simulation using expert Petri nets. International Journal of Production Research, 38(15), 3639-3676.
237. ZHANG, H. C. and KUO, T. C., 1996, A graph-based approach to disassembly model for end-of-life product recycling. Proceedings of IEEE/CPMT International Electronics Manufacturing Technology Symposium, pp. 247-254.
238. ZHOU, M. C., CAUDILL, R. J. and HE, X., 1998, Evaluation of environmentally conscious product designs. Proceedings of 1998 IEEE International Conference on Systems, Man, and Cybernetics, 4, 4057-4062.
239. ZHOU, M. C. and VENKATESH, K., 1999, Modeling, simulation, and control of flexible manufacturing systems: a Petri net approach. In F. Y. Wang (ed), Series in Intelligent Control and Intelligent Automation (London: World Scientific), Volume 6.
240. ZUIDWIJK, R. and KRIKKE, H., 2001, Disassembly for recovery under uncertainty. Proceedings of SPIE International Conference on Environmentally Conscious Manufacturing II, pp. 44-53.
241. ZÜLCH, G., SCHILLER, E. F. and MÜLLER, R., 1997, A disassembly information system. Proceedings of 4th CIRP International Seminar on Life Cycle Engineering, pp. 400-412.
242. ZUSSMAN, E., KRIWET, A. and SELIGER, G., 1994, Disassembly-oriented methodology to support design for recycling. CIRP Annals, 43(1), 9-14.
243. ZUSSMAN, E., 1995, Planning of disassembly systems. Assembly Automation 15(4), 20-23.
244. ZUSSMAN, E. and MELTSER, M., 1997, Planning and re-planning strategy of disassembly processes. Proceedings of 4th CIRP International Seminar on Life-Cycle Engineering, pp. 423-432.
245. ZUSSMAN, E., ZHOU, M. C. and CAUDILL, R., 1998, Disassembly Petri net approach to modeling and planning disassembly processes of electronic products. Proceedings of 1998 IEEE International Symposium on Electronics and the Environment, pp. 331-336.
246. ZUSSMAN, E. and ZHOU, M. C., 1999, A methodology for modelling and adaptive planning of disassembly processes. IEEE Transactions on Robotics and Automation, 15(1), 190-194.
247. ZUSSMAN, E. and ZHOU, M. C., 2000, Design and implementation of an adaptive process planner for disassembly processes. IEEE Transactions on Robotics and Automation, 16(2), 171-179.