Disassembly planning and scheduling: Review and further research

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Volumn 215, Issue 5, 2001, Pages 695-709

  Lee, D H ^a   Rang, J G ^a   Xirouchakis, P ^a  

^a EPFL   (Switzerland)

Author keywords

Disassembly planning and scheduling; Literature review; Remanufacturing; Research directions

Indexed keywords

EID: 33747286457     PISSN: 09544054     EISSN: None     Source Type: Journal    
DOI: 10.1243/0954405011518629     Document Type: Article

References (82)

1. Johnson, M. R. and Wang, M. H. Economical evaluation of disassembly operations for recycling, remanufacturing and reuse. Int. J. Prod. Res., 1998, 36, 3227-3252.
2. Pnueli, Y. and Zussman, E. Evaluating the end-of-life value of a product and improving it by redesign. Int. J. Prod. Res., 1997, 35, 921-942.
3. Kleiner, J. What does it mean to be green? Harvard Business Rev., 1991, 69, 38-47.
4. Clark, R. A. The challenge of going green. Harvard Business Rev., 1994, 72, 37-50.
5. Walley, N. and Whitehead, B. It's not easy being green. Harvard Business Rev., 1994, 72, 46-52.
6. Fleischmann, M., Bloemhof-Ruwaard, J. M., Dekker, R., Van der Laan, E., Van Nunen, J. A. E. E. and Van Wassenhove, L. N. Quantitative models for reverse logistics: a review. Eur. J. Opl Res., 1997, 103, 1-17.
7. Guide Jr, V. D. R., Jayaraman, V. and Srivastava, R. Production planning and control for remanufacturing: a state-of-the-art survey. Robotics and Computer Integrated Mfg, 1999, 15, 221-230.
8. Lund, R. T. Remanufacturing. Tecluwl. Rev., 1984, 87, 18-28.
9. Haynsworth, H. C. and Lyons, R. T. Remanufacturing by design, the missing link. Prod, and Inventory Managmt J., 1987, 28, 24-29.
10. Kumar, N., Vrat, P. and Sushil A simulation study of unit exchange spares management of diesel locomotives in the Indian Railways. Int. J. Prod. Economics, 1994, 33, 225-236.
11. Guide Jr, V. D. R. and Ghiselli, G. A. Implementation of drum-bufFer-rope at a military rework depot engine works. Prod, and Inventory Mcmagmt J., 1995, 36, 79-83.
12. de Ron, A. and Pcnev, K. D. Disassembly and recycling of electronic consumer products: an overview. Technovation, 1995, 15, 363-374.
13. Harjula, T., Rapoza, B. and Knight, W. A. Design for disassembly and environment. Ann. CIRP, 1996, 45, 109-114.
14. Mok, H. S., Kirn, H. J. and Moon, K. S. Disassemblability of mechanical parts in automobiles for recycling. Computers and Ind. Engng, 1997, 33, 621-624.
15. Gupta, S. M. and Isaacs, J. A. Value analysis of disposal strategies for automobiles. Computers and Ind. Engng, 1997, 33, 325-328.
16. Veerakamolmal, P. and Gupta, S. M. High-mix/low-volume batch of electronic equipment disassembly. Computers and Ind. Engng, 1998, 35, 65-68.
17. Uchivama, Y., Fujisawa, R., Pda, Y. and Hirasawa, E. Air conditioner and washing machine primary disassembly process. In Proceedings of 1st International Symposium on IEEE Environmentally Conscious Design and Inverse Manufacturing, 1999, pp. 258-262.
18. Guide Jr, V. D. R. Scheduling with priority dispatching rules and drum-buffer-rope in a recoverable manufacturing system. Int. J. Prod. Econ., 1997, 53, 101-116.
19. Guide Jr, V. D. R. and Srivastava, R. Buffering from material recovery uncertainty in a recoverable manufacturing environment. J. OpI Res. Soc., 1997, 48, 519-529.
20. Lambert, A. J. D. Optimal disassembly of complex products. Int. J. Prod. Res., 1997, 35, 2509-2523.
21. Jovane, F., Alting, L., Armoillotta, A., Eversheirm, W., Feldnianii, K., Seliger, G. and Roth, N. A key issue in product life cycle: disassembly. Ann. CIRP, 1993, 42, 651-658.
22. O'Shea, B., Grewal, S. S. and Kaebernick, H. State of the art literature survey on disassembly planning. Concurrent Engng: Res. and Applic., 1998, 6, 345-357.
23. Gupta, S. M. and McLean, C. R. Disassembly of products. Computers and Ind. Engng, 1996, 31, 225-228.
24. Zhang, H. C., Kuo, T. C., Lu, H. T. and Huang, S. H. Environmentally conscious design and manufacturing: a state-of-the-art survey. J. Mfg Syst., 1997, 16, 352-371.
25. Gungor, A. and Gupta, S. M. Issues in environmentally conscious manufacturing and product recovery: a survey. Computers and Ind. Engng, 1999, 36, 811-853.
26. Bras, B. and Mclntosh, M. W. Product, process and organizational design for remanufacture. Robotics and Computer Integrated Mfg, 1999, 15, 167-178.
27. Zussman, E. Planning of disassembly systems. Assembly Automn, 1995, 15, 20-23.
28. Moore, K. E., Gungor, A. and Gupta, S. M. A Pétri net approach to disassembly process planning. Computers and Ind. Engng, 1998, 35, 165-168.
29. Zhang, H. C. and Kuo, T. C. A graph-based approach to disassembly model for end-of-life product recycling. In Proceedings of IEEE/CPMT International Electronics Manufacturing Technology Symposium, 1996, pp. 247-254.
30. Zussman, E., Kriwet, A. and Seliger, G. Disassemblyoriented assessment methodology to support design for recycling. Ann. CIRP, 1994, 43, 9-14.
31. Gupta, S. M. and Taleb, K. N. Scheduling disassembly. //;J. J. Prod. Res., 1994, 32, 1857-1866.
32. Guide Jr, V. D. R. and Spencer, M. S. Rough-cut capacity planning for remanufacturing firms. Prod. Plann, and Control, 1997, 8, 237-244.
33. Kizilkaya, E. and Gupta, S. M. Material flow control and scheduling in a disassembly environment. Computers and Ind. Engng, 1998, 35, 93-96.
34. Cohen, M. A., Nahmias, S. and Pierskalla, W. P. A dynamic inventory system with recycling. Nov. Res. Logistics Q., 1980, 27, 289-296.
35. Mabini, M. C., Pintelon, L. M. and Gelders, L. F. EOQ type formulations for controlling repairable inventories. Int. J. Prod. Econ., 1992, 28, 21-33.
36. Richter, K. The EOQ repair and waste disposal model with variable setup numbers. Enr. J. Opl Res., 1996,96, 313-324.
37. Richter, K. The extended EOQ repair and waste disposal model. Int. J. Prod. Econ., 1996, 45, 443-448.
38. Van der Laan, E., Dekker, R., Salomon, M. and Ridder, A. An (s, Q) inventory model with remanufacturing and disposal. Int. J. Prod. Econ., 1996, 46, 339-350.
39. Van der Laan, E., Dekker, R. and Salomon, M. Product manufacturing and disposal: a numerical comparison of alternative control strategies. Int. J. Prod. Econ., 1996, 45, 489-498.
40. Van der Laan, E. and Salomon, M. Production planning and inventory control with remanufacturing and disposal. Eur. J. Opl Res., 1997,102, 264-278.
41. Krupp, J. Core obsolescence forecasting in remanufacturing. Prod, and Inventory Managmt J., 1992, 33, 12-17.
42. Zussman, E., Lenz, E. and Shpitalni, M. An approach to the automatic assembly planning problem. Ann. CIRP, 1990, 39, 33-36.
43. Subramani, A. K. and Dewhurst, P. Automatic generation of disassembly sequence. Ann. CIRP, 1991, 40, 115-118.
44. Homem De Mello, L. S. and Sanderson, A. C. A correct and complete algorithm for the generation of mechanical assembly sequences. IEEE Trans. Robotics and Automn, 1991, 7, 228-240.
45. Zhang, H. C. and Kuo, T. C. A graph-based approach to disassembly model for end-of-life product recycling. In Proceedings of IEEE/CPMT International Electronics Manufacturing Technology Symposium, 1996, pp. 247-254.
46. Zhang, H. C. and Kuo, T. C. A graph-based disassembly sequence planning for end-of-life product recycling. In Proceedings of IEEE/CPMT International Electronics Manufacturing Technology Symposium, 1997, pp. 140-151.
47. Kanai, S., Sasaki, R. and Kishinami, T. Representation of product and processes for planning disassembly, shredding, and material sorting based on graphs. In Proceedings of IEEE International Symposium on Assembly and Task Planning, Portugal, 1999, pp. 123-128.
48. Homem De Mello, L. S. and Sanderson, A. C. AND/OR graph representation of assembly plans. IEEE Trans. Robotics and Automn, 1990, 6, 188-199.
49. Kanehara, T., Suzuki, T., Inaba, A. and Okuma, S. On algebraic and graph structural properties of assembly Petri net-searching by linear programming. In Proceedings of IEEE/RSJ International Symposium on Intelligent Robots and Systems, 1993, pp. 2286-2293.
50. Laperrière, L. and ElMaraghy, H. A. Planning of products assembly and disassembly. Ann. CIRP, 1992, 41, 5-9.
51. Erdos, G., Kis, T. and Xirouchakis, P. Modeling and evaluating product end-of-life options. Int. J. Prod. Res., 2001 (to appear).
52. Lee, S. and Yi, C. Force-based reasoning in assembly planning. Proc. ASME, 1994, 97-108.
53. Lee, S. and Moradi, H. Disassembly sequencing and assembly sequence verification using force flow networks. In Proceedings of IEEE International Conference on Robotics and Automation, Detroit, Michigan, 1999, pp. 2762-2767.
54. Tseng, H. E. and Li, R. K. A novel means of generating assembly sequences using the connector concept. J. Intell. Mfg, 1999, 10, 423-435.
55. Johnson, M. R. and Wang, M. H. Planning product disassembly for material recovery opportunities. Int. J. Prod. Res., 1995,33,3119-3142.
56. Qian, W. H. and Pagello, E. On the scenario and heuristic of disassemblies. In Proceedings of IEEE International Conference on Robotics and Automation, 1994, pp. 264-270.
57. Penev, K. D. and de Ron, A. J. Determination of a disassembly strategy. Int. J. Prod. Res., 1996, 34, 495-506.
58. Zussnian, E. and Zhou, M. C. A methodology for modeling and adaptive planning of disassembly processes. IEEE Trans. Robotics and Aittomn, 1999, 15, 190-194.
59. Lambert, A. J. D. Optimal disassembly sequence generation for combined material recycling and part reuse. In Proceedings of IEEE International Symposium on Assembly and Task Planning, 1999, pp. 146-151.
60. Lambert, A. J. D. Linear programming in disassembly/ clustering sequence generation. Computers and Ind. Engng, 1999, 36, 723-738.
61. Shyamsundar, N. and Gadh, R. Selective disassembly of virtual prototypes, systems. In Proceedings of IEEE International Conference on Systems, Man and Cybernetics, 1996, 4, pp. 3159-3164.
62. Srinivasan, H. and Gadh, R. Complexity reduction in geometric selective disassembly using the wave propagation abstraction. In Proceedings of IEEE International Conference on Robotics and Automation, Leuven, Belgium, 1998, pp. 129-134.
63. Navin-Chandra, D. The recovery problem in product design. J. Engng Des., 1994, 5, 65-86.
64. Krikkc, H. R., van Harten, A. and Schuur, P. C. On a medium term product recovery and disposal strategy for durable assembly products. Int. J. Prod. Res., 1998, 36, 111-139.
65. Lee, Y.-Q. and Kumara, S. R. T. Individual and group disassembly sequence generation through freedom and interface spaces. J. Des. and Mfg, 1992, 2, 143-154.
66. Gungor, A. and Gupta, S. M. Disassembly sequence planning for products with defective parts in product recovery. Computers and Ind. Engng, 1998, 35, 161-164.
67. Martinez, M., Pham, V. H. and Favrel, J. Dynamic generation of disassembly sequences. In Proceedings of 6th International Conference on Engineering Technologies and Factory Automation, 1997, pp. 177-182.
68. Geiger, D., Zussman, E. and Lenz, E. Probabilistic reactive disassembly planning. Ann. CIRP, 1996, 45, 49-52.
69. KroII, E., Beardsley, B. and Parulian, A. A methodology to evaluate ease of disassembly for product recycling. HE Trans., 1996, 28, 837-845.
70. Kriwet, A., Zussman, E. and Seliger, G. Systematic integration of design-for-recycling into product design. Int. J. Prod. Econ., 1995, 38, 15-22.
71. Taleb, K. N., Gupta, S. M. and Brennan, L. Disassembly of complex product structures with parts and materials commonality. Prod. Plann, and Control, 1997, 8, 255-269.
72. Taleb, K. N. and Gupta, S. M. Disassembly of multiple product structures. Computers and Ind. Engng, 1997, 32, 949-961.
73. Panisset, B. D. MRP II for repair/refurbish industries. Prod, and Inventory Managmt J., 1988, 29, 12-15.
74. Xirouchakis, P. and Kiritsis, D. Petri net model for disassembly process planning. Proc. ASME, 1997.
75. Lee, D.-H., Kiritsis, D. and Xirouchakis, P. Branch and fathoming algorithms for operations sequencing in process planning. Int. J. Prod. Res., 2001 (to appear).
76. Lee, D.-H., Kiritsis, D. and Xirouchakis, P. Simulated annealing algorithms for operations sequencing in process planning. In Proceedings of 27th International Conference on Computers and Industrial Engineering, Beijing, China, 2000.
77. Lee, D.-H., Kiritsis, D. and Xirouchakis, P. Search heuristics for operations sequencing in process planning. Int. J. Prod. Res., 2001 (to appear).
78. Shyamsundar, N. and Gadh, R. Geometric abstraction to support disassembly analysis. HE Trans., 1999, 31, 935-946.
79. Zussman, E., Scholz-Reiter, B. and Scharke, H. Modeling and planning of disassembly process. Life Cycle Modelling for Innovative Products and Process, 1996, 221-232.
80. Neuendorf, K.-P., Lee, D.-H., Kiritsis, D. and Xirouchakis, P. Disassembly scheduling with part commonality. Department of Mechanical Engineering, Swiss Federal Institute of Technology at Lausanne (EPFL), Switzerland, Working paper, 2000.
81. Neuendorf, K.-P., Lee, D.-H., Kiritsis, D. and Xirouchakis, P. Scheduling disassembly with parts commonality using Petri nets with timestamps. In Proceedings of Workshop on Concurrency, Specification, and Programming, Berlin, Germany, 2000.
82. Murthy, D. N. P. and Ma, L. MRP with uncertainty: a review and some extensions. Int. J. Prod. Econ., 1991, 25, 51-64.