State of the art literature survey on disassembly planning

Concurrent Engineering Research and Applications

Volumn 6, Issue 4, 1998, Pages 345-357

  O'Shea, B ^a   Grewal, S S ^b   Kaebernick, H ^a  

^a UNIVERSITY OF NEW SOUTH WALES   (Australia)

^b CSIRO   (Australia)

Author keywords

Clustering; Disassembly planning; Life cycle engineering; Sequence generation

Indexed keywords

EID: 0000930416     PISSN: 1063293X     EISSN: None     Source Type: Journal    
DOI: 10.1177/1063293X9800600407     Document Type: Review

References (76)

1. Vujosevic, R; Raskar, R; Yetukuri, N. V; Jothishankar, M. C; Juang, S. H; "Simulation Animation and analysis of design disassembly for maintainability," Int. J. Prod. Res., 1995, Vol. 33, No. 11.
2. Johnson, M. R. and Wang, M. H; "Planning Product Disassembly for Material Recovery Opportunities," Int. J. Prod. Res., 1995, Vol. 33, No. 11.
3. Chen, R. W; Navin-Chandra, D; Prinz, F. B; "A Cost-Benefit Analysis Model of Product Design for Recyclability and its Applications," IEEE Transactions On Components, Packaging And Manufacturing Technology - Part A, Vol. 17, No. 4, December 1994.
4. Boswell, C. J; "A Feedback Strategy for a Closed-Loop End-Of-life Cycle Process," Concept - Clean Electronics Products and Technology, 9-11 October 1995, Conference Publication No. 415, Iee 1995.
5. Homem de Mello, L. S. and Sanderson, A. C; "AND/OR Graph Representation of Assembly Plans," IEEE Transactions On Robotics And Automation, Vol. 6, No. 2, April 1990.
6. Subramani, A. K; Dewhurst, P; "Automatic Generation of Product Disassembly Sequences," Annals Of The CIRP, Vol. 40/1/1991.
7. Zussman, E; Kwiret, A; Seliger, G; "Disassembly-Oriented Assessment Methodology to support Design for Recycling," Annals of the CIRP Vol. 43/1/94.
8. Yokota, K. and Brough, D. R; "Assembly/Disassembly Sequence Planning," Assembly Automation, Vol. 2, No. 3, pp 31-38.
9. Qian, W. H. and Pagello, E; "On the Scenario and Heuristic's of Disassemblies," 1994 IEEE International Conference on Robotics and Automation, pp 264-271.
10. Klein, C. M. and Rhee, H. K; "An Assembly Sequence Generation Procedure," Computers and Industrial Engineering, Vol. 21, Nos 1-4, pp 63-66, 1991.
11. Huang, K. I; "Development of an Assembly Planner using Decomposition Approach," Proceedings of the IEEE International Conference on Robotics and Automation, Vol. 2, pp 63-68, 1993.
12. Dowie, T; Simon, M; Fogg, B; "Product Disassembly Costing in a Life-cycle Context," Concept - Clean Electronics Products and Technology, conference publication No 415, IEE, 1995.
13. Mattikalli, R. S; Khosla, P. K; Xu, Y; "Subassembly Identification and Motion Generation for Assembly: A Geometric Approach," IEEE International Conference on Systems Engineering, pp 399-403, 1990.
14. Brennan, L; Gupta, M; Taleb, K. N; "Operations Planning Issues in an Assembly/Disassembly Environment," International Journal of Operations and Production Management. Vol. 14, No. 9, pp 57-67.
15. Dutta, D; Woo, T. C; "Algorithm for Multiple Disassembly and Parallel Assemblies," Transactions of the ASME, Vol. 117, February 1995, pp 102-109.
16. Navin-Chandra, D; "ReStar: A Design Tool for Environmental Recovery Analysis," International Conference on Engineering Design, ICED '93, The Hague, August 17-19, 1993.
17. Jovane, F; Alting, L; Armillitta, A; Everscheim, W; Feldmann, K; Seliger, G; Roth, N; "A Key Issue in Product Life-Cycle: Disassembly," Annals of the CIRP, Vol. 42/2/1993, pp 651-658.
18. Laperriere, L; ElMaraghy, H. A; "Planning of Products Assembly and Disassembly," Flexible Manufacturing Research and Development Centre, McMaster University, Ontario, Canada, 14 January, 1992.
19. Zussman, E; "Planning of Disassembly Systems," Assembly Automation, Vol. 15, No. 4, 1995, pp 20-23.
20. Kochan, A; "In Search of a Disassembly Factory," Assembly Automation, Vol. 15, No. 4, 1995, pp 16-17.
21. Smith, D; Small, M; Dodds, R; Amagai, S; Strong, T; "Computer Monitor Recycling: A Case Study," CONCEPT - Clean Electronics Products and Technology, 9-11 October 1995, Conference Publication No. 415, IEE, 1995, pp 124-128.
22. Low, M. K; Williams, D. J; Dixon, A. C; "Design Practices for Improving the End-Of-Life Disposal of Telecommunications Equipment," CONCEPT - Clean Electronics Products and Technology, 9-11 October 1995, Conference Publication No. 415, IEE, 1995, pp 111-116.
23. Kroll, E; Beardsley, B; Parulian, A; "A methodology to evaluate ease of disassembly for product recycling," IIE Transactions, Vol. 28, No. 10, October 1996.
24. Pankam, E; "Disassembly of products for reuse and recycling," Thesis, Master of Engineering Science, University of New South Wales, March, 1995.
25. Penev, K. D; and de Ron, A. J; "Determination of Disassembly Strategy," International Journal of Production Recourse's, 1996, Vol. 34, No. 2, pp 495-506.
26. Zussman, E; Lenz, E; Shpitalni, M; "An Approach to the Automatic Assembly Planning Problem," Annals of the CIRP 39/1/1990.
27. Boks, C. B; Kroll, E; Brouwers, W. J. C; Stevels, A. L. N; "Disassembly Modeling: Two Applications to a Philips 21″ Television Set," IEEE International Symposium on Electronics and the Environment, 1996, pp 224-229.
28. Lee, S; Yi, C; "Forced-Based reasoning in assembly planning," Vision Sensors and Control for Automated Manufacturing Systems, SPIE Vol. 2063/97-108.
29. Minami, S; Pahng, K. F; Jakiela, M. J; Srivastàva, A., "A Cellular Automata Representation for Assembly Simulation and Sequence Generation," IEEE International Symposium on Assembly and task Planning, 1995, pp 56-65.
30. Di Marco, P; Eubanks, C. F; Ishii, K, "Compatibility Analysis of Product Analysis for Recyclability and Reuse," Computers in Engineering, Vol. 1, ASME - 1994, pp 105-112.
31. Spath, D; Hartel, M; Tritsch, C, "Recycling Oriented Information Management: A Prerequisite for Life Cycle Engineering," Journal of Engineering Design, Vol. 7, No. 3, 1996, pp 251-264.
32. Gupta, S. M, McLean, C. R; "Disassembly of Products," Computers in Industrial Engineering, Vol 31, No. 1/2, pp 225-228.
33. Wong, S; Fu, J. C; Troy, C. A, "A Product Assembly and Restoration Planning System for Ecologically Conscious Factories," Information Infrastructure Systems for manufacturing, pp 319-329.
34. Feldmann, K; Scheller, H, "Disassembly of Electronic Products," Proceedings of the IEEE International Symposium on Electronics and the Environment, 1994, pp 81-86.
35. O'Flynn, M. J; Ahmad, M. M, "A Design for Manufacture cost based system for PWB assembly," Journal of Design and Manufacturing, 1993, Vol. 3, pp 29-38.
36. Delchambre, A; Wafflard, A; Falkenauer, E, "Integrated and Computer Aided Tool for Assembly and Recourse Planning," The Institution of Engineers Australia, 1993 International Conference on Assembly, pp 87-94.
37. Abrantes, M, J; Hill, S, D, "Expert-System Generation of Assembly Sequences," The Institution of Engineers Australia, 1993 International Conference on Assembly, pp 69-76.
38. Kanai, S; Jeong, J; Takahashi, H; Tokunaga, M; Onozuka, M, "The Integration of Computer Aided Assembly Sequence Planning and Mechanical Design of the Assembly machine," The Institution of Engineers Australia, 1993 International Conference on Assembly, pp 95-107.
39. Bhaskare, A; "Assembly Sequence Design Methods," The Institution of Engineers Australia, 1993 International Conference on Assembly, pp 109-115.
40. Ansems, A. M. M, "Automation of the Disassembly processes of Consumer Goods," IEEE International Symposium on Electronics and the Environment, 1994, pp 334.
41. Grewal, S; Tran P; Bhaskare, A, "Assembly Planning Research at CSIRO Australia," IEEE Invited Session on Assembly Recources Planning, Pittsburgh, USA, Aug 1995.
42. Tran, P; Grewal, S, "A Model and Schema for an Assembly Planning Software," CSIRO, Div. of Manufacturing Technology, New South Wales, Australia.
43. Seidel, U. A, "Methodology for Coordinated DFA and Assembly Sequence Planning," Fraunhofer institute for Industrial Engineering, 1989.
44. ElMaraghy, H, A, "Evolution and Future Perspective's of CAPP," Annals of the CIRP, Vol. 42/2/1993, pp 739-751.
45. Van Brussel, H, "Planning and Scheduling of Assembly Systems," Annals of the CIRP, Vol. 39/2/1990, pp 637-644.
46. Grewal, S; Tran, P; Bhaskare, A, "Assembly Planning Software," Annals of the CIRP, Vol. 44/1/1995, pp 1-6.
47. Compton, T. R, "Using Activity Based Costing in your Organisation - Part 1," Journal of Systems Management, March, 1994, pp 32-39.
48. Compton, T. R, "Using Activity Based Costing in your Organisation - Part 2," Journal of Systems Management, April, 1994, pp 36-39.
49. Amsler, B. M; Busby J. S; Williams, G. M, "Combining Activity Based Costing and Process Mapping: A Practical Study," Integrated Manufacturing Systems, Vol. 4, No. 4, 1993, pp 10-17.
50. Kroll, E, "Application of Work-Measurement Analysis to Product Disassembly for Recycling," Concurrent Engineering: Research and Applications, Vol 4, No. 2, June 1996, pp 149-158.
51. Sanderson, A. C; Peshkin, M. A; Homem de Mello, L. S, "Task Planning for Robotic Manipulation in Space Applications," IEEE Transactions on Aerospace and Electronic Systems, Vol. 24, No. 5, Sept, 1988, pp 619-629.
52. Wolf, H. H, "The Future of Vehicle Recycling," BMW AG, Munich, pp 211-230.
53. Penev, K. D; de Ron, A. J, "Development of Disassembly Line for Refrigerators," Industrial Engineering, November 1994, pp 50-53.
54. Elsevier Material Selector, Ed. Waterman, N. A; Ashby, M.F, Vol. 1,2,3, 1991.
55. Hock, H; Maten, M. A. jr, "Recovering Automotive Plastics," Automotive Engineering, October 1993, pp 59-62.
56. D'Anjou L. O; Choi, J. H; Glantschig, W. J; Stefanacci, E. F, "Designing with Plastics: Considering Part Recyclability and the use of Recycled Materials," AT&T Technical Journal, November/December 1995, pp 54-60.
57. Snow, C, "Industry needs facts on Waste and Recycling," Electro technology, December 1995/January 1996, pp 12-13.
58. "Standard Practice for Generic Marking of Plastic Products," Annual Book of ASTM Standard, Vol 08.01 Plastics (I): D 256-D 2343, pp 522-524.
59. Tompeck, M. A; Pfafflin, J. R, "Recycling Waste materials," Encyclopedia of Environmental Science and Engineering, Vol. 2, 3rd Ed, 1992, pp 976-980.
60. Kirby, J. R; Wadehra, I, "Designing Business machines for Disassembly and Recycling," IEEE International Symposium on Electronics and the Environment, 1993, pp 32-36.
61. Dewhurst, P, "Product design for Manufacture: Design for Disassembly", Industrial Engineering, Sept 1993, pp 26-28.
62. Navin-Chandra, D, "The Recovery Problem in Product Design," Journal of Engineering Design, Vol. 5, No. 1, 1994, pp 65-85.
63. Lou, S; Leu, J; Jorjani, S, "Comparing Different Disassembly Strategies," IEEE International Symposium on Electronics and the Environment, 1996, pp 73-77.
64. Kiesgen, G; Emanako, M. E; Slawik, F, "Development of Partially-Automated Disassembly plants for Regaining Reuseable Parts," Industrial Robot, Vol. 23, No. 3, 1996, pp 11-15.
65. Harjula, T; Rapoza, B; Knight, W. A; Boothroyd, G, "Design for Disassembly and the Environment," Annals of the CIRP, Vol. 45/1/1996, pp 109-114.
66. Homem de Mello, L. S; Sanderson, A. C, "A Correct and Complete Algorithm for the Generation of Mechanical Assembly Sequences," IEEE Transactions on Robotics and Automation, Vol. 7, No. 2, April 1991, pp 228-240.
67. Laperriere, L; ElMaraghy, H. A, "Assembly Sequence Planning for Simultaneous Applications," International Journal of Advanced Manufacturing Technology, (1994) 9:231-244.
68. Lee, S; Shin, Y. G, "Assembly Planning Based on Subassembly Extraction," IEEE International Conference on Robotics and Automation, 1990, pp 1606-1611.
69. Kanai, S; Takahashi, H; Makino, H, "ASPEN: Computer Aided Assembly Sequence Planning and Evaluation System Based on Predetermined Time Standard," Annals of the CIRP, Vol. 45/1/1996, pp 35-39.
70. Bhatia, P; Karnick, H; Ghosh, A, "A Configuration Space Based Approach for Robotic Assembly Sequencing," Robotica, 1996, Vol. 14, pp 633-645.
71. Habil, Bullinger, H. J.; Warchat, J.; Bopp, R.; Woerner, K., "Approaches to Product Life Cycle Cost Estimation in Concurrent Engineering," http://www.rdm.iao.fgh.de/projekte/toprocco/PUBLICATIONS/CEEPAPER.html.
72. Hentschel, C; Seliger, G; Zussman, E, "Grouping of Used Products for Cellular Recycling Systems," Annals of the CIRP, Vol. 44/1/1995, pp 11-14.
73. Geiger, D; Zussman, E, "Probabilistic Reactive Disassembly Planning," Annals of the CIRP, Vol. 45/1/1996, pp 49-52.
74. Emblemsvaeg, J; Bras, B, "Activity Based Costing in Design for Product retirement," DE-Vol. 69-2, Advance in Design Automation-1994, Vol. 2, ASME 1994, pp 351-361.
75. Wittenberg, G, "Life After Death for Consumer Products," Assembly Automation, Vol. 12, No. 2, 1992.
76. Zandin, B. K; "MOST Work Measurement Systems," 1980.