Recent advances in processing and characterization of periodic mesoporous MCM-41 silicate molecular sieves

Industrial and Engineering Chemistry Research

Volumn 40, Issue 15, 2001, Pages 3237-3261

  Selvam, P ^a,b   Bhatia, S K ^a   Sonwane, C G ^a  

^a UNIVERSITY OF QUEENSLAND   (Australia)

^b INDIAN INSTITUTE OF TECHNOLOGY BOMBAY   (India)

Author keywords

[No Author keywords available]

Indexed keywords

ADSORBENTS; CAPILLARY FLOW; CONDENSATION; ION EXCHANGE; ISOTHERMS; MESOPOROUS MATERIALS; PORE SIZE; SORPTION; SURFACE PROPERTIES;

SORPTION MODELS;

MOLECULAR SIEVES;

SILICATE;

FILTRATION; MOLECULAR SIEVE; SILICATE; ULTRAFILTRATION;

ADSORPTION; CATALYST; GEOMETRY; HYSTERESIS; ION EXCHANGE; MOLECULAR BIOLOGY; MOLECULAR SIZE; POLYMERIZATION; POROSITY; REVIEW;

EID: 0035878084     PISSN: 08885885     EISSN: None     Source Type: Journal    
DOI: 10.1021/ie0010666     Document Type: Review

References (296)

1. Tailored porous materials
2. A review of zeolite-like porous materials
3. Open-framework inorganic materials
4. Mesoporous inorganic solids
5. Recommendations for the characterization of porous solids
6. Ordered mesoporous molecular sieves synthesised by a liquid-crystal template mechanism
7. The preparation of alkyltrimethylammonium-kanemite complexes and their conversion to mesoporous materials
8. A new family of mesoporous molecular sieves prepared with liquid crystal templates
9. Synthesis of highly ordered mesoporous materials from a layered polysilicate
10. The preparation and potential applications of ultra large pore molecular sieves: A review
11. Microporous to mesoporous molecular sieve materials and their use in catalysis
12. Zeolites and molecular sieves: Not just ordinary catalysts
13. Topochemistry of zeolites and related materials: 1. Topology and geometry
14. Inorganic solid acids and their use in acid-catalyzed hydrocarbon reactions
15. Ordered macroporous materials by emulsion templating
16. General synthesis of periodic macroporous solids by templated salt precipitation and chemical conversion
17. Morphogenesis of biomineral and morphosynthesis of biomimetic forms
18. 2 structures produced by templating polymer gels
19. Novel mesoporous silicates with two-dimensional mesostructure direction using rigid bolaform surfactants
20. Synthesis of macro-mesoporous niobium oxide molecular sieves by a ligand-assisted vesicle templating strategy
21. Development of a formation mechanism for M41S
22. Towards the rational design and synthesis of microporous and mesoporous silica-containing materials
23. Adsorption isotherm of water vapor and its large hysteresis on highly ordered mesoporous silica
24. Triblock copolymer syntheses of mesoporous silica with periodic 50 to 300 Å pores
25. Nonionic triblock and start diblock copolymer and oligomeric surfactant synthesis of highly ordered, hydrothermally stable mesoporous silica structures
26. A neutral templating route to mesoporous molecular sieves
27. Block copolymer templating syntheses of mesoporous metal oxides with large ordering lengths and semicrystalline framework
28. Templating mesoporous molecular sieves by nonionic polyethylene oxide surfactants
29. Synthesis of mesoporous silica with large pores and bimodal pore size distribution by templating polymer lattices
30. Novel mesoporous materials with a uniform distribution of organic groups and inorganic oxides in their framework
31. Generalized synthesis of periodic surfactant/inorganic composite materials
32. Monolithic mesoporous silica templated by microemulsion liquid crystals
33. Studies on ordered mesoporous materials III. Comparison of MCM-41 to mesoporous materials derived from kanemite
34. Accurate method for calculating mesopore size distributions from argon adsorption data at 87 K developed using model MCM-41 materials
35. Synthesis of mesoporous materials: Liquid-crystal templating versus intercalation of layered silicates
36. Surface silanol groups of mesoporous silica FSM-16
37. Ordered mesoporous materials
38. Template-based approaches to the preparation of amorphous, nanoporous silicas
39. Periodic mesoporous materials: Synthesis, characterization and potential applications
40. Non-silica periodic mesostructured materials: Recent progress
41. Synthesis and applications of supramolecular-templated mesoporous materials
42. Advances in mesoporous molecular sieve MCM-41
43. Organization of organic molecules with inorganic molecular species into nanocomposite biphase arrays
44. Synthesis of highly ordered MCM-41 by micelle-packing control with mMixed surfactants
45. 0) assembly pathway
46. Recent advances in the synthesis, characterization and applications of the mesoporous molecular sieves
47. Mesoporous materials
48. Mesoporous materials by templating of liquid crystalline phases
49. Topological construction of mesoporous materaials
50. Derivatised mesoporous solids
51. Porous inorganic materials
52. Superstructures of mesoporous silicas
53. Mesochemistry
54. Liquid crystal templating of porous materials
55. Surfactant control of phases in the synthesis of mesoporous silica-based materials
56. Oil-water interface templating of mesoporous macroscale structures
57. Mesoporous silica molecular sieves prepared by ionic and neutral surfactant templating: A comparison of physical properties
58. Liquid-crystalline phases as templates for the synthesis of mesoporous silica
59. Assembly of mesoporous lamellar silicas with hierarchical particle architectures
60. Ultrastable mesostructured silica vesicles
61. Continuous mesoporous silica films with highly ordered large pore structures
62. Evaluating pore sizes in mesoporous materials: A simplified standard adsorption method and a simplified broekhoff-de boer methodology
63. Mesostructure design with Gemini surfactants: Supercage formation in a three-dimensional hexagonal array
64. Disordered molecular sieves with branched mesoporous channel network
65. Mesoporous silica from lyotropic liquid crystal polymer templates
66. Synthesis of nanoporous silica with new pore morphologies by templating the assemblies of ionic block copolymers
67. Glycometalate surfactants. Part 1: Non-aqueous synthesis of mesoporous silica
68. Manganese oxide mesoporous structures: Mixed-valent semiconducting catalysts
69. Characterization of aluminophosphate-based tubular mesoporous molecular sieves
70. 2 by a modified sol-gel methodology
71. Mesoporous magnetic materials based on rare earth oxides
72. Mesoporous gallium oxide structurally stabilized by yttrium oxide
73. Preparation of lamellar and hexagonal forms of mesoporous silica and zirconia by the neutral amine route: Lamellar-hexagonal transformation in the solid state
74. Cooperative formation of inorganic-organic interfaces in the synthesis of silicate mesostructures
75. Synthesis and characterization of hexagonally packed mesoporous tantalum oxide molecular sieves
76. Synthesis of a stable hexagonally packed mesoporous niobium oxide molecular sieve through a novel ligand-assisted templating mechanism
77. Glycometalate surfactants. Part 2: Non-aqueous synthesis of mesoporous titanium, zirconium and niobium
78. Ordered macroporous materials by emulsion templating
79. Synthesis of macroporous minerals with highly ordered three-dimensional arrays
80. Hierarchically ordered oxides
81. Synthesis of mesoporous aluminophosphates using surfactants with long alkyl chain lengths and triisopropylbenzene as solubilizing agent
82. Synthesis of mesoporous aluminophosphates and their adsorption properties
83. Synthesis and characterization of lamellar and hexagonal mesostructured aluminophosphates using alkyltrimethylammonium cations as structure-directing agents
84. Synthesis of ordered aluminophosphate and galloaluminophosphate mesoporous materials with anion-exchange properties utilizing polyoxometalate cluster/surfactant salts as precursors
85. Synthesis of mesostructured lamellar aluminophosphates using supramolecular templates
86. Synthesis and characterization of mesoporous SAPO
87. Synthesis and characterization of mesostructured aluminophosphates using the fluoride route
88. Synthesis and characterization of a novel layered aluminophosphate of kanemite-like structure
89. Anion exchange properties of a mesoporous aluminophasphate
90. Nonaqueous synthesis of mesostructured aluminophosphate/surfactant composites: Synthesis, characterization, and in situ SAXS studies
91. Lamellar aluminophosphates with surface patterns that mimic diatom and radiolarian microskeletons
92. Synthesis of a hexagonal mesostructured aluminophosphate
93. Synthesis of highly ordered carbon molecular sieves via template-mediated structural transformation
94. Synthesis of new mesoporous carbon and its applications to electrochemical double-layer capacitors
95. Possibilities of mesoporous materials in catalysis
96. The synthesis and application of the mesoporous molecular sieves MCM-41-A review
97. Recent advances in nano- and macroscale control of hexagonal, mesoporous materials
98. Inclusion chemistry in periodic mesoporous hosts
99. Catalysis by crystalline mesoporous molecular sieves
100. Heterogeneous catalysts for liquid-phase oxidations: Philosopher's stones or trojan horses?
101. Using the organic-inorganic interface to define pore and macroscale structure
102. Adsorptive Separation of Methylalumoxane by Mesoporous Molecular Sieve MCM-41
103. Conversion of fly ash into mesoporous aluminosilicate
104. Nonstoichiometric properties of nanoporous iron oxide films
105. Preparation of transparent mesoporous silica films by a rapid solvent evaporation methodology
106. Comparison of an ordered mesoporous aluminosilicate, silica, alumina, titania and zirconia in normal-phase high-performance liquid chromatography
107. The synthesis of micrometer- and submicrometer-size spheres of ordered mesoporous oxide MCM-41
108. Mesoporous M41S materials in capillary gas chromatogaraphy
109. Highly efficient photoinduced electron transfer with 2,4,6-triphenylpyrylium cation incorporated inside extra large pore zeotype MCM-41
110. Porous adsorbents for vehicular natural gas storage: A review
111. Structure and dynamics of hydrogen sorption in mesoporous MCM-41
112. Immobilization of a C-2-symmetric ansa-zirconocene complex on silica surfaces using a Si-Cl anchor: Catalysts for isospecific propene polymerization
113. Surface properties and catalytic performance of novel mesostructured oxides
114. Heterogeneous catalysts obtained by grafting metallocene complexes onto mesoporous silica
115. Photoactivity of titanium dioxide supported on MCM41, zeolite X, and zeolite Y
116. Base and acid catalysis by the alkali-containing MCM-41 mesoporous molecular sieve
117. Eco-friendly molecular sieve based heterogeneous catalysts for liquid-phase oxidation of aromatic compounds
118. Photocatalyzed reaction of meso-tetraphenylprophyrin on mesoporous TiMCM-41 molecular sieves
119. Homogeneous catalysts to solid catalysts
120. The synthesis of new chiral salen complexes immobilized on MCM-41 by grafting and their catalytic activity in the asymmetric borohydride reduction of ketones
121. Tertiary butylation of phenol over mesoporous H-FeMCM-41
122. Para-selective t-butylation of phenol over mesoporous H-AlMCM-41
123. Acidity and stability of MCM-41 crystalline aluminosilicates
124. Binary caesium-lanthanum oxide supported on MM-41: A new stable heterogeneous basic catalyst
125. 1,5,7-Triazabicyclo[4.4.0]dec-5-ene immobilized in MCM-41: A strongly basic porous catalyst
126. MCM-41 - Quaternary organic tetraalkylammonium hydroxide composites as strong and stable bronsted base catalysts
127. Synthesis of an ultralarge pore titanium silicate isomorphous to MCM-41 and its application as a catalyst for selective oxidation of hydrocarbons
128. Titanium-containing mesoporous molecular sieves for catalytic oxidation of aromatic compounds
129. Oxidation of phenols over mesoporous (Cr)MCM-41
130. New acid catalyst comprising heteropoly acid on a mesoporous molecular sieve MCM-41
131. Superparamagnetic particles in mesoporous FeMCM-41 Molecular Sieves
132. Pt/MCM-41 catalyst for selective reduction of nitric oxide with hydrocarbons in the presence of excess oxygen
133. MCM-41 as support for small platinum particles: A catalyst for low-temperature carbon monoxide oxidation
134. Hydrocracking of vacuum gasoil on the novel mesoporous MCM-41 aluminosilicate catalyst
135. Mesoporous molecular sieve MCM-41 supported Co-Mo catalyst for hydrodesulfurization of petroleum resids
136. Modification of MCM-41 by surface silylation with trimethylchlorosilane and adsorption study
137. 29Si CP/MAS NMR FTIR, pyridine-TPD, and TGA
138. Nature of hydroxy groups in MCM-41
139. Distinguishing the silanol groups in the mesoporous molecular sieve MCM-41
140. Water sorption on mesoporous aluminosilicate MCM-41
141. Peroxidative halogenation catalyzed by transition-metal-ion-grafted mesoporous silicate materials
142. Asymmetric expoxidation of alkenes catalysed by chromium binaphthyl schiff base complex supported on MCM-41
143. 3Cl on phosphinated MCM-41 for catalytic hydrogenation of olefins
144. Sorption of nitrogen, water vapor, and benzene by a phenyl-modified MCM-41 sorbent
145. Physisorption of nitrogen and oxygen by MCM-41, a model mesoporous adsorption
146. Physisorption of argon, nitrogen and oxygen by MCM-41, a model mesoporous adsorbent
147. Physisorption of alcohols and water vapour by MCM-41 a model mesoporous adsorbent
148. Adsorption of carbon dioxide, sulfur dioxide and water vapor by MCM-41, a model mesoporous adsorbent
149. Adsorption of carbon tetrachloride and nitrogen by 3.4 nm Pore diameter siliceous MCM-41
150. Unusual type of adsorption isotherm describing capillary condensation without hysteresis
151. Adsorption study of surface and structural properties of MCM-41 materials of different pore sizes
152. A unifed interpretation of high-temperature pore size expansion processes in MCM-41 mesoporous silicas
153. Relations between pore structure parameters and their implications for characterisation of MCM-41 using gas adsorption and X-ray diffraction
154. Capillary critical point of argon, nitrogen, oxygen, ethylene, and carbon dioxide in MCM-41
155. Analysis of nitrogen adsorption isotherm for a series of porous silicas with uniform and cylindrical pores: A new method of calculating pore size distribution of pore radius 1-3 nm
156. Pore size analysis of MCM-41 type adsorbents by means of nitrogen and argon adsorption
157. Adsorption of benzene and ethanol on MCM-41 materials
158. Adsorption on MCM-41 mesoporous molecular sieves part 1. Nitrogen isotherms and parameters of the porous structure
159. Adsorption on MCM-41 mesoporous molecular sieves, Part 2. Cyclopentane isotherm and their temperature dependence
160. 4-5
161. Surface characters and adsorption behavior of Pb(II) onto a mesoporous titanosilicate molecular sieve
162. Coated mesoporous silica: Supersoaker for heavy metals
163. Access in mesoporous materials: Advantages of a uniform pore structure in the design of a heavy metal ion adsorbent for environmental remediation
164. Functionalized monolayers on ordered mesoporous supports
165. 2+ adsorbents by nonionic surfactant assembly
166. Nanochemistry: Synthesis in diminishing dimensions
167. MCM-41 and related materials as media for controlled polymerization processes
168. Conducting carbon wires in ordered, nanometer-sized channels
169. Conducting polyaniline filaments in a mesoporous channel host
170. Host - Guest chemistry using an oriented mesoporous host: Alignment and isolation of a semiconducting polymer in the nanopores of ordered silica matrix
171. Enzyme immobilization in MCM-41 molecular sieve
172. 3 nanoparticles in mesoporous silicate
173. Conducting polyaniline (PANI) filaments in mesoporous MCM-41
174. Nanocrystalline Ge filaments in the pores of a mesosilicate
175. Mesoporous molecular sieve immobilized enzymes
176. Size-selective incorporation of CdS nanoparticles into mesoporous silica
177. High catalytic efficiency of transition metal complexes encapsulated in a cubic mesoporous phase
178. X-ray diffraction study of mesophases of cetyltrimethyl ammonium bromide in water, formamide, and glycerol
179. Effect of surfactant/silica molar ratios on the formation of mesoporous molecular sieves: Inorganic mimicry of surfactant liquid-crystal phases and mechanistic implications
180. Studies on mesoporous materials. II. Synthesis mechanism of MCM-41
181. The synthesis and properties of M41S and related mesoporous materials
182. Pore wall of a mesoporous molecular sieve derived from kanemite
183. Transformation of lamellar silicate into the mesoporous molecular sieve MCM-41
184. 22-TMAC1 as a template and fine control of its pore size
185. Studies on mesoporous self-organizing aluminosilica
186. Rapid synthesis of mesoporous silica with micrometer sized hexagonal prism structure
187. Room-temperature synthesis of silicate mesoporous MCM-41-type materials: Influence of the synthesis pH on the porosity of the materials obtained
188. F-mediated synthesis of mesoporous silica with ionic- and nonionic surfactants. A new templating pathway
189. 6 in ammonia surfactant solution
190. Synthesis and pore size control of cubic mesoporous silica SBA-1
191. Influence of template extraction on structure, activity and stability of MCM-41 catalysts
192. Supercritical fluid extraction of surfactant template from MCM-41
193. Simultaneous modification of mesopores and extraction of template molecules from MCM-41 with trialkylchlorosilanes
194. Structural order in MCM-41 controlled by shifting silicate polymerization equilibrium
195. Further Improvements in the Long-Range Order of MCM-41 Materials
196. Thermal stability of mesoporous molecular sieve
197. Studies on mesoporous materials: I. Synthesis and characterisation of MCM-41
198. Thermal and hydrothermal stability of framwork-substituted MCM-41 mesoporous materials
199. Ion exchange and thermal stability of MCM-41
200. Irreversible change of pore structure of MCM-41 upon hydration at room temperature
201. Disintegration of mesoporous structures of MCM-41 and MCM-48 in water
202. Improvement of hydrothermal stability of mesoporous silica using salts: Reinvestigation for time-dependent effects
203. Improvement of hydrothermal stability of MCM-41 using salts effects during the crystallization process
204. Stabilization of mesoporous molecular sieves by trimethylsilylation
205. Mechanochemical collapse of M41S mesoporous molecular sieves through hydrolysis of siloxane bonds
206. Stability of mesoporous aluminosilicate MCM-41 under vapor treatment, acidic and basic conditions
207. Preparation dependent stability of pure silica MCM-41
208. Synthesis of acidic aluminosilicate mesoporous molecular sieves using primary amines
209. Increased stability of organically modified MCM-41 Synthesized by a one-step procedure
210. Metamorphic materials - Restructuring siliceous mesoporous materials
211. Directing the pore dimensions in the mesoporous molecular sieve MCM-41
212. Synthesis of MCM-41 with different pore diameters without addition of auxiliary organics
213. Charactrization of large-pore MCM-41 molecular sieves obtained via hydrothermal restructuring
214. Influence of hydrothermal restructuring conditions on structural properties of mesoporous molecular sieves
215. Postsynthesis hydrothermal restructuring of M41S mesoporous molecular sieves in water
216. Controlling the channel diameter of the mesoporous molecular sieve MCM-41
217. Metamorphic materials: Restructuring siliceous mesoporous materials
218. Hydrothermal transformation and characterization of porous silica templated by surfactants
219. Improvement of hydrothermal stability of MCM-41 mesoporous molecular sieve
220. Effect of auxiliary chemicals preparation of silica MCM-41
221. Highly ordered MCM-41 silica prepared in the presence of decyltimethylammonium bromide
222. Micelle-templated silicates as a est bed for methods of mesopore size evaluation
223. Fine-tuning of the pore size of MCM-41 by adjusting the initial pH of the synthesis mixture
224. Evidence of supramolecular organization of alkane and surfactant molecules in the process of forming mesoporous silica
225. New approaches to pore size engineering of mesoporous silicates
226. Expanding the pore size of MCM-41 silicas: Use of amines as expanders in direct synthesis and postsynthesis procedures
227. Controlling pore size distribution of MCM-41 by direct synthesis
228. Characterization of large-pore MCM-41 molecular sieves via hydrothermal restructuring
229. The effect of alkan-1-ols addition on the structural ordering and morphology of mesoporous silicate MCM-41
230. Effect of methanol concentration on CTAB micellization and on the formation of surfactant-templated silica (STS)
231. Surfactant-templated silica mesophases formed in water-cosolvent mixtures
232. 51V NMR and UV-Vis spectroscopies
233. Tailoring surface and structural properties of MCM-41 silicas by bonding organosilanes
234. Functionalized mesoporous materials obtained via interfacial reactions in self-assembled silica surfactant systems
235. Morphological control of ordered mesoporous silica: Formation of fine and rod-like mesoporous powders from completely dissolved aqueous solutions of sodium metasilicate and cationic surfactants
236. The synthesis of mesoporous silica spheres by octylamine templating
237. Synthesis of mesoporous silica spheres under quiescent aqueous acidic conditions
238. Preparation of hard mesoporous silica spheres
239. Micrometer-sized mesoporous silica spheres grown under static conditions
240. Bimodal mesopore distribution in a silica prepared by calcining a wet surfactant-containing silicate gel
241. Formation of novel oriented transparent films of layered silica-surfactant nanocomposites
242. Synthesis of oriented films of mesoporous silica on mica
243. Free-standing and oriented mesoporous silica films grown at the air-water interface
244. Biomimetic pathways for assembling inorganic thin films
245. A simple set-gel route for the preparation of silica-surfactant mesostructured materials
246. Preparation of supported mesoporous silica layers in a continuous flow cell
247. Magnetic field alignment of ordered silicate-sulfactant composites and mesoporous silica
248. A new phase of oriented mesoporous silicate thin films
249. Continuous formation of supported cubic and hexagonal mesoporous films by sol-gel dip-coating
250. Hierarchical order in hollow spheres of mesoporous silicates
251. Mesoporous molecular sieves MCM-41 with a hollow tubular morphology
252. "Tubules-within-a-tubule" hierarchical order of mesoporous molecular sieves in MCM-41
253. A method for the synthesis of high quality large crystal MCM-41
254. Restructuring of mesoporous silica: High quality large crystal MCM-41 via a seeded recrystallisation route
255. NMR relaxation and self-diffusion measurements on small molecules in MCM-41 with different pore sizes
256. X-ray diffraction studies of freezing and melting of water confined in a mesoporous adsorbent (MCM-41)
257. 2 adsorption, and HREM. A preliminary study
258. A molecular simulation study of freezing/melting phenomenon for lennard-jones methane in cylindrical nanoscale pores
259. Structural characterization of MCM-41 over a wide range of length scales
260. Characterization of surface roughness of MCM-41 using methods of fractal analysis
261. Application of large pore MCM-41 molecular sieve to improve pore size analysis using nitrogen adsorption measurements
262. 2
263. Mechanical stability of pure silica mesoporous MCM-41 by nitrogen adsorption and small-angle X-ray diffraction measurements
264. Diffuse wall structure and narrow mesopores in highly crystalline MCM-41 materials studied by X-ray diffraction
265. Small-angle neutron scattering studies on the mesoporous molecular sieve MCM-41
266. Pore structure analysis without a pore shape model
267. The determination of pore volume and area distributions in porous substances. I. Computations from nitrogen isotherms
268. Studies on pore systems in catalysts IX. Calculation of pore distribution from the adsorption branch of nitrogen sorption isotherm in the case of open cylindrical pores A. Fundamental equation
269. Method for the calculation of effective pore size distribution in molecular sieve carbon
270. Curvature and parametric sensitivity in models for adsorption in micropores
271. Phase equilibria of fluid interfaces and confined fluids. Nonlocal versus local density functionals
272. Evaluation of pore structure parameters of MCM-41 catalyst supports and catalyst by means of nitrogen and argon adsorption
273. Characterization of pore size distributions of mesoporous materials from adsorption isotherms
274. Thickness and stability of adsorbed film in cylindrical mesopores
275. Determination of pore size distributions by regularization and finite element collocation
276. Capillary coexistence and criticality in mesopores: Modification of the Kelvin theory
277. Adsorption in mesopores: A molecular-continuum model with application to MCM-41
278. A model for adsorption of condensable vapors on nonporous materials
279. Calculation of pore size distributions of nanoporous materials from adsorption and desorption isotherms
280. Adsorption hysteresis and pore critical temperature in a single cylindrical pore
281. Analysis of criticality and isotherm reversibility in regular mesoporous materials
282. Capillary condensation and adsorption in cylindrical and slit-like pores
283. Capillary hysteresis in nanopores: Theoretical and experimental studies of nitrogen adsorption on MCM-41
284. Characterisation of MCM-41 using molecular simulation: Heterogeneity effects
285. Comments on the limits of applicability of the capillary condensation mechanism
286. The lower closure point in adsorption isotherms of the capillary condensation type
287. Assembly of mesoporous silica molecular sieves based on nonionic ethoxylated sorbitan esters as structure directors
288. 0) assembly pathway
289. High-resolution transmission electron microscopy of mesoporous MCM-41 type materials
290. Synthesis and characterization of ferrocenyl-modified mesoporous silicates
291. Alumination and ion exchange of mesoporous SBA-15 molecular sieves
292. Hierarchical organization of mesoporous MCM-41 ropes