Disassembly Modeling for Assembly, Maintenance, Reuse, and Recycling

Disassembly Modeling for Assembly, Maintenance, Reuse and Recycling

Volumn , Issue , 2004, Pages 1-421

  Gupta, Surendra M ^b  

^a Fred) Lambert A J D   (Netherlands)

^b NORTHEASTERN UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85146104301     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/9780203487174     Document Type: Book

References (428)

1. Akermark, A.M., 1997, Design for Disassembly and Recycling. In: Krause, F.L. and Seliger, G. (eds.): Life Cycle Networks, Proceedings of the 4th CIRP International Seminar on Life-Cycle Engineering, 237-248.
2. Baldwin, D.F., Abell, T.E., Lui, M.M., De Fazio, T.L., and Whitney, D.E., 1991, An integrated computer aid for generating and evaluating assembly sequences for mechanical products. IEEE Transactions on Robotics and Automation, 7, 78-94.
3. Batchelor, R., 1994, Henry Ford, Manchester UK; Manchester University Press.
4. Boothroyd, G., Poli, C., and Murch, L.E., 1982, Automatic assembly. In: G. Boothroyd, (ed.), Manufacturing Engineering and Materials Processing, Vol. 6, New York: Marcel Dekker.
5. Bourjault, A., 1984, Contribution a une approche methodologique de l’assemblage automatise: Elaboration automatique des sequences operatoires, (Contribution to a systematic approach of automatic assembly: Automatic determination of operation sequences). Ph.D. Thesis, Besanson, France: Universite de Franche-Comte, (in French).
6. Bourjault, A., Chappe, D., and Henrioud, J.M., 1987, Elaboration automatique des gammes d’assemblage a l’aide de resaux de Petri (automatic elaboration of assembly routines using Petri nets). RAIRO(APII), 21, 323-342 (in French).
7. De Fazio, T.L. and Whitney, D.E., 1987, Simplified generation of all mechanical assembly sequences. IEEE Journal of Robotics and Automation, RA-3(6), 640-658.
8. Dewhurst, P., 1993, Product design for manufacture: Design for disassembly. Industrial Engineering, 25(9), 26-28.
9. Donnan, D.C. and Makan, K., 1983, Disassembly line balancing. MTM Journal of Methods-Time Measurement, 10(2), 20-27.
10. Dornan, S.B., 1987, A status report: Artificial intelligence. Production, 99(4), 46-50.
11. EC, 2000, Directive 2000/53/EC of the European Parliament and of the Council of 18 September 2000 on end-of-life vehicles. Official Journal of the European Communities, L269/34, October 21st.
12. Encyclopedia Americana, 1965. New York: Americana Corporation.
13. Encyclopedia Britannica, 1994. London UK: Encyclopaedia Britannica.
14. Erdos, G. and Xirouchakis, P., 1999, Extended Petri-net modeling for re-manufacturing line simulation, Proceedings of IEEE Conference on Ecodesign, 83-88.
15. Feldmann, K. and Hopperdietzel, R., 1993, Environmental recycling by automated disassembly, Zeitschrift fur wirtschaftliche Fertigung und Automatisierung, 88(4), 148-150.
16. Fox, B.R. and Kempf, K.G., 1985, Opportunistic scheduling for robotic assembly. Proceedings of 1985 IEEE International Conference on Robotics and Automation, 880-889.
17. Gupta, S.M. and Taleb, K.N., 1994, Scheduling disassembly. International Journal of Production Research, 32(8), 1857-1866.
18. Heemskerk, C.J.M., 1990, A concept for computer aided planning for flexible assembly. Ph.D. thesis. Delft: Technische Universiteit Delft. 276 p.
19. Homem de Mello, L.S. and Sanderson, A.C., 1990, And/or graph representation of assembly plans. IEEE Transactions on Robotics and Automation, 6(2), 188-189.
20. Homem De Mello, L.S. and Sanderson, A.C., 1991, A correct and complete algorithm for the generation of mechanical assembly sequences. IEEE Transactions on Robotics and Automation, 7(2), 228-240.
21. Isaacs, J.A. and Gupta, S.M., 1997, Economic consequences of increasing polymer content for the U.S. automobile recycling infrastructure. Journal of Industrial Ecology, 1(4), 19-33.
22. Kanehara, T., Suzuki, T., Inaba, A., and Okuma, S., 1993, On algebraic and graph structural properties of assembly Petri net, Proceedings of the 1993 IEEE/RSJ International Conference on Intelligent Robots and Systems, Yokohama, July 26-30, 2286-2293.
23. Kilbridge, M.D. and Wester, L, 1961, A heuristic method of assembly line balancing. The Journal of Industrial Engineering, 12(4).
24. Knapp, O. and Jansen, H., 1993, Environmental considerations in product development. ETZ, 114(22), 1386-1389 (in German).
25. Moore, K.E., Gungor, A., and Gupta, S.M., 1998, A Petri net approach to disassembly process planning, Computers and Industrial Engineering, 35(1-2), 165-168.
26. Moore, K.E., Gungor, A., and Gupta, S.M., 2001, Petri net approach to disassembly process planning for products with complex AND/OR precedence relationships. European Journal of Operations Research, 135(2), 428-449.
27. Moore, K.E. and Gupta, S.M., 1996, Petri net models of flexible and automated manufacturing systems: A survey. International Journal of Production Research, 34(11), 3001-3035.
28. Prenting, T.O. and Battaglin, R.M., 1964, The precedence diagram: A tool for analysis in assembly line balancing. Journal of Industrial Engineering, 15(4), 208-213.
29. Rekiek, B., Delchambre, A., Dolgui, A., and Bratcu, A., 2002, Assembly line design: A survey. IFAC 15th World Congress, Plenary Papers, Survey Papers, and Milestones, 131-142.
30. Seliger, G., Heinemeier, H.J., and Neu, S, 1993, Robot-guided disassembly and assembly of small transmissions for substitute production. Zeitschriftfur wirtschaftliche Fertigung und Automatisierung, 88(6), 245-248.
31. Tabucanon, M.T. and Somnasang, S., 1981, Line balancing in an automobile assembly plant: Comparative applications of two techniques. Industrial Management, 23(4), 18-23.
32. Tiwari, M.K., Sinha, N., Kumar, S., Rai, R., and Mukhopadhyay, S.K., 2002, A Petri net based approach to determine the disassembly strategy of a product. International Journal of Production Research, 40(5), 1113-1129.
33. Wild, R., 1972, Mass-production management. London, UK: John Wiley and Sons.
34. Yuditskii, S.A., 1983, Discrete assembly-line processes and Petrinets. Automation and Remote Control, 44(6, part 2), 806-810 (in English, translated from Russian).
35. Zussman, E., Zhou, M.C., and Caudill, R., 1998, Disassembly Petri net approach to modeling and planning disassembly processes of electronic products, Proceedings of IEEE International Symposium on Electronics and the Environment, 331-336.
36. Akermark, A.M., 1997, Design for disassembly and recycling. In: Krause, F.L. and Seliger, G. (eds.): Life Cycle Networks, Proceedings of 4th CIRP International Seminar on Life-Cycle Engineering, 237-248.
37. Angerer, G., Batcher, K., and Bars, P., 1993, Upgrading of electronic scrap (Verwertung von Elektronikschrott). Waste management in research and practice (Abfallwirtschaft in Forschung und Praxis), Vol. 59. Berlin: Erich Schmidt. (in German)
38. Anonymous, 1997, Results of some breakdown experiments, performed at a Dutch recycling company.
39. Ansems, A. and Esmeyer, F., 1989, Scheiding en recycling van non-ferrometaal/kunststof-combinaties (Separation and recycling of non-ferrous/plastics combinations). Apel-doorn (NL): TNO. Report (in Dutch).
40. ARN, 2002 Auto Recycling Netherland, Statistics.
41. Arner, R., 1997, Computer recycling in the U.S. http://www.computerecycleforeduc.com/recycling.html
42. Ayres, R.U. and Ayres, L.W., 1996, Industrial Ecology: Closing the Materials Cycle. Cheltenham: Edward Elgar.
43. Backthru, 2002, New York: Back thru the Future Micro Computers, Inc. http://www.thegreenpc.com/recyclin.htm
44. BAN and SVTC, 2002, Exporting Harm: The high-tech trashing of Asia. Seattle, WA: Basel Action Network; San Jose, CA: Silicon Valley Toxics Coalition. Report, p. 52.
45. Bandivadekar, A.P., Gunter, K.L., and Sutherland, J.W., 2002, A model for material flows and economic exchanges within the U.S. automotive life cycle chain and its sensitivity to systematic changes. Proceedings of the 9th CIRP Life Cycle Engineering Seminar, Erlangen, Germany.
46. Boon, J.E., Isaacs, J.A., and Gupta, S.M., 2000, Economic impact of aluminum-intensive vehicles on the U.S. automotive recycling infrastructure. Journal of Industrial Ecology, 4(2), 117-134.
47. Boon, J.E., Isaacs, J.A., and Gupta, S.M., 2003, End-of-life infrastructure economics for ‘Clean Vehicles’ in the U.S. Journal of Industrial Ecology, 7(1), 25-45.
48. Boon, J.E., Isaacs, J.A., and Gupta, S.M., 2002, Economic sensitivity for end-of-life planning and processing of personal computers. Journal of Electronics Manufacturing, 11(1), 81-93.
49. Brodersen, K., Tartler, D., and Danzer, B., 1994, Scrap of electronics: A challenge to recycling activities. Proceedings of IEEE International Symposium on Electronics and the Environment, 174-176.
50. Chen, K.Z., 2001, Development of integrated design for disassembly and recycling in concurrent engineering. Integrated Manufacturing Systems, 12(1), 67-79.
51. Coolrec, 1997, Information Brochure. Eindhoven.
52. Das, S.K. and Matthew, S., 1999, Characterization of material outputs from an electronics demanufacturing facility. Proceedings of IEEE International Symposium of Electronics and the Environment, 251-256.
53. Das, S.K., Yedlarajiah, P., and Narendra, R., 2000, An approach for estimating the end-of-life product disassembly effort and cost. International Journal of Production Research, 38(3), 657-673.
54. De Fazio, T.L., Delchambre A., and De Lit, P., 1997, Disassembly for recycling of office electronic equipment. European Journal of Mechanical and Environmental Engineering, M 42(1), 25-31.
55. De Ron, A.J. and Penev, K., 1995, Disassembly and recycling of electronic consumer products: An overview. Technovation, 15(6), 363-374.
56. Den Hond, F., 2000, Industrial ecology: A review. Regional Environmental Change, 1(2), 60-69.
57. DEPA, 1999, Brominated flame retardants: Substance flow analysis and assessment of alter-natives. Report of Danish Environmental Protection Agency, p. 225.
58. Dini, G., Failli, F., and Santochi, M., 2001, A disassembly planning software system for the optimization of recycling processes. Production Planning & Control, 12(1), 2-12.
59. Ebersperger, R., 1993, Energieoptimierte Nutzungsdauer von Waschmaschinen (Energetically optimal life-cycle of washing machines). In: Kumulierter Energie-und Stoff-bilanzen. Dusseldorf: VDI-Verlag. VDI-Berichte Vol. 1093. pp. 215-233. (in German).
60. Ebersperger, R., 1995, Beispiele fur Zurechnungsverfahren des Energieaufwands bei Entsorgung und Recycling von Produkten (Examples for the calculation of the Gross Energy Requirement in recollection and recycling of products). In: Kumulierter Energieaufwand. Dusseldorf: VDI-Verlag. VDI-Berichte Vol. 1218. pp. 11-31. (in German).
61. EC, 2000, Directive of the European Parliament and Council on discarded electric and electronic products. Brussels, C0M(2000) 347.
62. European Shredder Group, 2002. http://www.efr2.org/EFR-ESG3.htm.
63. Ferrao, P., Reis, I. and Amaral, J., 2002, The industrial ecology of the automobile: A Portuguese perspective. International Journal of Ecology and Environmental Sciences, 28, 27-34.
64. Frosch, R.A. and Gallopoulos, N.E., 1989, Strategies for manufacturing. Scientific American, 261(3), 144-152.
65. Furuhjelm, J., Yasuda, Y., and Trankell, R., 2000, Recycling of telecommunication products in Europe, Japan and USA. Proceedings of IEEE International Symposium on Electronics and the Environment, 143-148.
66. Gao, M., Zhou, M.C., and Caudill, R.J., 2002, Integration of disassembly leveling and bin assignment for demanufacturing automation. IEEE Transactions on Robotics and Automation, 18(6), 867-874.
67. Gao, W., Ariyama, T., Ojima, T., and Meier A., 2001, Energy impacts of recycling disassembly material in residential buildings. Energy and Buildings, 33, 553-562.
68. Graedel, T.E. and Allenby, B.R., 1995, Industrial Ecology. Englewood Cliffs: Prentice Hall.
69. Gungor, A. and Gupta, S.M., 1999, Issues in environmentally conscious manufacturing and product recovery: A survey. Computers and Industrial Engineering, 36(4), 811-853.
70. Gupta, S.M. and Isaacs, J.A., 1997, Value analysis of disposal strategies for automobiles. Computers and Industrial Engineering, 33(1-2), 325-328.
71. HDP, 2000, Environmentally compliant electronics framework specification. Report of High Density Packaging User Group International, Scottsdale AZ.
72. Hendricks, V.G.M., 1992, Selective demontage van auto’s voor materiaalhergebruik (Selective disassembly of cars aimed at materials recycling). M.Sc.-thesis, Technische Uni-versiteit Eindhoven, 1992 (in Dutch).
73. Isaacs, J.A. and Gupta, S.M., 1997, Economic consequences of increasing polymer content for the U.S. automobile recycling infrastructure. Journal of Industrial Ecology, 1(4), 19-33.
74. Ishii, K., Eubanks, C.F., and Marks, M., 1993, Evaluation methodology for post-manufacturing issues in life-cycle design. Concurrent Engineering, 1(1), 61-68.
75. JTEC, 1992, Display technologies in Japan. Report of Japanese Technology Evaluation Center, http://www.wtec.og/loyola/dsply_jp.
76. Kaiser, H. and Hirsch, S., 1995, Recycling von elektrischen Hausgeraten gelost (Recycling of electric household appliances solved). Abfallwirtschafts-Journal, 7(3), 1-4. (in German).
77. Knapp, O. and Jansen, H., 1993, Environmental considerations in product development. ETZ, 114(22), 1386-1389.
78. Knight, W.A. and Sodhi, M.S. 2000, Design for bulk recycling: Analysis of materials separation. Annals of the CIRP, 49(1), 83-86.
79. Krikke, H.R., Van Harten, A., and Schuur, P.C., 1998, On a medium term product recovery and disposal strategy for durable assembly products. International Journal of Production Research, 36(1), 111-139.
80. Lambert, A.J.D., 1999, Linear programming in disassembly/clustering sequence generation. Computers and Industrial Engineering, 36, 723-738.
81. Lambert, A.J.D., 2001, Life-cycle chain analysis including recycling. In: Sarkis, J. (ed.), Greener Manufacturing and Operations. Sheffield, UK: Greenleaf Publishing. Chapter 2, pp. 36-55.
82. LAP, 2002, Landelijk Afvalbeheersplan: Milieueffectrapportage 2002-2012. Utrecht: Com-missie voor de Milieueffectrapportage (in Dutch).
83. L’Eglise, T., De Lit, P., Delchambre, A., and Raucent, B., 2000, Recycling of electric and electronic end-of-life devices: Economical assessment study in Brussels, Belgium. Proceedings of IEEE International Symposium on Electronics and the Environment, 149-154.
84. Lu, Q., Christina, V., Stuart, J.A., and Rich, T., 2000, A practical framework for the reverse supply chain. Proceedings of IEEE International Symposium on Electronics and the Environment, 266-271.
85. Menad, N., 1999, Cathode ray tube recycling. Resources, Conservation and Recycling, 26, 143-154.
86. Moyer, L.K. and Gupta, S.M., 1997, Environmental concerns and recycling/disassembly efforts in the electronics industry. Journal of Electronics Manufacturing, 7(1), 1-22.
87. NVMP, 2000, http://www.nvmp.nl/html/asp/productenlijst.asp: List of takeback fees for electric and electromechanical household products. Zoetermeer (NL): Nederlandse Vereniging Verwijdering Metalektro Producten. (in Dutch).
88. Potzschke, M., 1991, Gebrauchsguter als komplexe Rohstofquelle (Consumption goods as a complex raw materials resource). In: Recycling: Eine Heurausforderung fur den Kon-strukteur (Recycling: A challenge for the designer). Dusseldorf: VDI. VDI-Berichte, vol. 906, p. 43-74 (in German).
89. Recycler’s World, 2002, http://www.recycle.net/price: Computer & Electronics Recycling Index; RecycleNet Scrap Metals Index; Andela Scrap Glass Index; RecycleNet Automotive Recycling Index; RecycleNet Plastic Recycling Index; RecycleNet Tire & Rubber Index. August 28.
90. Reimer, B., Sodhi, M.S., and Knight, W.A., 2000, Optimizing electronics end-of-life disposal costs. Proceedings of IEEE International Symposium on Electronics and the Envi-ronment, 342-347.
91. Roberts, B., 1999, Mining cast-off PCs. Electronic Business, 25(12), 47-48.
92. Samel, R., 2001, Materials in cars: Options for change. Materials Technology & Advanced Performance Materials, 16(1), 4-7.
93. Schlag, D., 1991, Entsorgung von Elektronikaltgeraten (Recovery of end-of-life electronic products). Stuttgart: Landesanstalt fur Umweltschitz Baden-Wurttemberg. Sach-standsbericht (in German).
94. Schubert, H., 1996, Electric/electronic waste in the Closed Cycle Economy (Elektro-/Elek-tronikschrott in der Kreislaufwirtschaft), Fraunhofer Institute for Process Technology, Karlsruhe (in German).
95. Smith, D., Small, M., Dodds, R., Amagai, S., and Strong, T., 1995, Computer monitor recycling: A case study. Proceedings of IEEE Conference on Clean Electronics Products and Technology (CONCEPT), 124-128.
96. Sodhi, M.S., Young, J., and Knight, W.A., 1999, Modelling material separation processes in bulk recycling. International Journal of Production Research, 37(10), 2239-2252.
97. Sodhi, M.S. and Reimer, B., 2001, Models for recycling electronics end-of-life products. OR-Spektrum, 23, 97-115.
98. Spengler, T., Puchert, H., Penkuhn, T., and Rentz, O., 1997, Environmental integrated production and recycling management. European Journal of Operational Research, 97(2), 308-326.
99. Spengler, T., Ploog, M., and Schroter, M, 2003, Integrated Planning of Acquisition, Disassembly and Bulk Recycling: A Case Study on Electronic Scrap Recovery. OR Spectrum, 25(3), 413-442.
100. Stuart, J.A. and Lu, Q., 2000a, A model for discrete processing decisions for bulk recycling of electronics equipment. IEEE Transactions on Electronics Packaging Manufacturing, 23(4), 314-320.
101. Stuart, J.A. and Lu, Q., 2000b, A refine-or-sell decision model for a station with continuous reprocessing options in an electronics recycling center. IEEE Transactions on Electronics Packaging Manufacturing, 23(4), 321-327.
102. Sum, E.Y.L., 1991, The recovery of metals from electronics scrap. Journal of the Minerals, Metals and Materials Society (JOM), 43(4), 53-61.
103. Thomas, V., Caudill, R., and Badwe, D., 1998, Marginal emissions and variations across models: Life-cycle assessment of a television. Proceedings of IEEE International Symposium of Electronics and the Environment, 48-53.
104. Van Bezooijen, G. 2000, EEE waste in the Netherlands, data presented at Workshop on Refrig-erator Recycling, held at Universite Politechnique, Mons, Belgium, May 2000.
105. Van der Hoek, A., 1994, De retourstroom van TV’s. M.Sc.-Thesis. Eindhoven: Technische Universiteit. (in Dutch).
106. Van Roosmalen, R. 2000, Hoogwaardige verwerking van shredderresidu (High-quality processing of shredder residue). Magazine Recycling Benelux, Issue 5, 2000, 12-15, (in Dutch).
107. Weber, R., 1991, Die Entwicklung recyclinggerechten Automobile (Design for recycling of cars). In: Recycling: Eine Herausforderung fur den Konstrukteur (Recycling: A challenge for the designer). Dusseldorf: VDI-Verlag. VDI-Berichte Vol. 906 p. 75-88. (in German).
108. Weissmantel, H., Baire, C., Kaase, W., and Thomas, A.G., 1997, Benefit function for determining the optimum recycling option for products and parts. Life Cycle Networks. Proceedings of 4th CIRP International Seminar on Life Cycle Engineering. London: Chapman & Hall, 276-287.
109. Zhang, H.C. and Kuo, T.C., 1996. Disassembly model for recycling-personal computer. Dearborn, MI: Society of Manufacturing Engineers (SME). Technical paper MS96-132.
110. Akermark, A.M., 1997, Design for disassembly and recycling. In: Krause, F.L. and Seliger, G. (eds.): Life Cycle Networks, Proceeding of the 4th CIRP International Seminar on Life-Cycle Engineering, 237-248.
111. Armillotta, A. and Semeraro, Q., 1997, Assessment of destructive operations in disassembly process planning. International Journal of Flexible Automation and Integrated Man-ufacturing. 5(1-2), 57-78.
112. Asiedu, Y. and Gu, P., 1998, Product life cycle cost analysis: State of the art review. International Journal of Production Research, 36(4), 883-908.
113. Boks, C.B., Kroll, E., Brouwers, W.C.J., and Stevels, A.L.N., 1996, Disassembly modelling: Two applications to a Philips 21” television set. Proceedings of IEEE International Symposium on Electronics and the Environment, 224-229.
114. Boon, J.E., Isaacs, J.A., and Gupta, S.M., 2000, Economic impact of aluminum-intensive vehicles on the U.S. automotive recycling infrastructure. Journal of Industrial Ecology, 4(2), 117-134.
115. Boon, J.E., Isaacs, J.A., and Gupta, S.M., 2003, End-of-life infrastructure economics for ‘Clear Vehicles’ in the United States. Journal of Industrial Ecology, 7(1), 25-45.
116. Boothroyd, G. and Alting, L., 1992, Design for assembly and disassembly. Annals of the CIRP, 41(2), 625-636.
117. Bourjault, A., 1984, Contribution a une approche methodologique de l’assemblage automa-tise: Elaboration automatique des sequences operatoires (Contribution to a systematic approach of automatic assembly: The automatic generation of operation sequences), (Besanson, France: Faculty of Science and Technology, Universite de Franche-Comte), Ph.D. Thesis, 12 November (in French).
118. Bras, B. and Emblemsvag, J., 1995, The use of activity-based costing, uncertainty, and disassembly action chards in demanufacture cost assessments. Proceedings of 1995 ASME Design Engineering Technical Conferences, 1, 285-292.
119. Cagno, E., Di Giulio, A., and Trucco, P., 2000, Planning the end-of-life management within the product design process. Proceedings of SPIE International Conference on Envi-ronmentally Conscious Manufacturing. Belligham, WA: SPIE. Vol. 4193, 299-308.
120. Chen, R.W., Navin-Chandra, D. and Prinz, F.B., 1993, Product design for recyclability: A cost benefit analysis model and its application. Proceedings of IEEE International Symposium on Electronics and the Environment, 178-183.
121. Chen, K.Z., 2001, Development of integrated design for disassembly and recycling in concurrent engineering. Integrated Manufacturing Systems, 12(1), 67-79.
122. Das, S.K. and Matthew, S., 1999, Characterization of material outputs from an electronics demanufacturing facility. Proceedings of IEEE International Symposium on Electronics and the Environment, 251-256.
123. Das, S.K., Yedlarajiah, P., and Narendra, R., 2000, An approach for estimating the end-of-life product disassembly effort and cost. International Journal of Production Research, 38(3), 657-673.
124. Dini, G., Failli, F., and Santochi, M., 2001, A disassembly planning software system for the optimization of recycling processes. Production Planning & Control, 12(1), 2-12.
125. Dowie, T. and Kelly, P., 1994, Estimation of disassembly times. Technical report. Manchester UK: Manchester Metropolitan University, Dept. of Mechanical Engineering, Design and Manufacture.
126. EC, 2000, Directive 2000/53/EC of the European Parliament and of the Council of 18 September 2000 on end-of-life vehicles, Official Journal of the European Communities, October 21st, p. L269/34.
127. Gao, M., Zhou, M.C., and Caudill R.J., 2002, Integration of disassembly leveling and bin assignment for demanufacturing automation. IEEE Transactions on Robotics and Automation, 18(6), 867-874.
128. Goedkoop, M. and Spriensma, R., 2000, The eco-indicator 99. A damage oriented method for Life Cycle Impact Assessment: Methodology report. Den Haag: Ministry of Housing, Spatial Planning and the Environment (2nd edition). Available on the Internet on http://www.pre.nl
129. Guinee, J.B., Udo De Haes, H.A., and Huppes G., 1993a, Quantitative life cycle assessment of products. Part 1: Goal definition and inventory. Journal of Cleaner Production, 1(1), 2-13.
130. Guinee, J.B., Heijungs, R., Udo De Haes, H.A., and Huppes G., 1993b, Quantitative life cycle assessment of products. Part 2: Classification, valuation and improvement analysis. Journal of Cleaner Production, 1(2), 81-91.
131. Harjula, T., Rapoza, B., Knight, W.A., and Boothroyd, G., 1996, Design for disassembly and the environment. Annals of the CIRP, 45(1), 109-114.
132. Isaacs J.A. and Gupta, S.M., 1997, Economic consequences of increasing polymer content for the U.S. automobile recycling infrastructure. Journal of Industrial Ecology, 1(4), 19-33.
133. Jorden, W, 1991, Konstruieren recyclinggerechter Produkte mit den neuen Richtlinie VDI 2243 (Design for disassembly with the new directive VDI 2243). In: Recycling: Eine Heurausforderung fur den Konstrukteur (Recycling: A challenge for the designer). Dusseldorf: VDI. VDI-Berichte, vol. 906, p. 23-41 (in German).
134. Jovane, F., Alting, L., Armillotta, A., Eversheim, W., Feldmann, K., Seliger, G., and Roth, N, 1993, A key issue in product life cycle: Disassembly. Annals of the CIRP, 42(2), 651-658.
135. Jovane, F., Semeraro, Q., and Armillotta A., 1997, Computer-aided disassembly planning as a support to product redesign. In: Krause, F.L. and Seliger, G. (eds.), Life Cycle Networks. Proceedings of 4th CIRP International Seminar on Life-Cycle Engineering. London: Chapman and Hall. 388-399.
136. Jovane, F., Semeraro, Q., and Armillotta A., 1998, On the use of the profit rate function in disassembly process planning. The Engineering Economist, 43(4), 309-330.
137. Knight, W.A., 1996, Software tools to evaluate cost benefits and environmental impact of designing for disassembly, recycling and the environment. Technical Papers of the Design for the 21st Century, Regional Technical Conference. Brookfield, CT: Society of Plastics Engineers (SPE). 27-38.
138. Knight, W.A. and Sodhi, M.S., 2000, Design for bulk recycling: Analysis of materials separation. Annals of the CIRP, 49(1), 83-86.
139. Kongar, E. and Gupta, S.M., 2002, A multi-criteria decision making approach for disassembly-to-order systems. Journal of Electronics Manufacturing, 11(2), 171-183.
140. Kroll, E., 1996, Application of work-measurement analysis to product disassembly for recycling. Concurrent Engineering, 4(2), 149-156.
141. Kroll, E., Beardsley, B., and Parulian, A., 1996, A methodology to evaluate ease of disassembly for product recycling. IIE Transactions, 28, 837-845.
142. Kroll, E. and Carver, B.S., 1999, Disassembly analysis through time estimation and other metrics. Robotics and Computer Integrated Manufacturing, 15, 191-200.
143. Kuo, T.C., Huang, S.H., and Zhang, H.C., 2001, Design for manufacture and design for ‘X’: Concepts, applications, and perspectives. Computers & Industrial Engineering, 41, 241-260.
144. Lambert, A.J.D. and Stoop, M.L.M., 2001, Processing of discarded household refrigerators: Lessons from the Dutch example. Journal of Cleaner Production, 9, 243-252.
145. Lee, B.H. and Ishii, K., 1997, Demanufacturing complexity metrics in design for recyclables. Proceedings of IEEE Symposium on Electronics and the Environment, 19-24.
146. Lee, S. and Shin, Y.G., 1990, Assembly planning based on subassembly extraction. Proceedings of IEEE International Conference on Robotics and Automation, 1606-1611.
147. McGlothlin, S. and Kroll, E., 1995, Systematic estimation of disassembly difficulties: Application to computer monitors. Proceedings of IEEE Conference on Electronics and the Environment, 83-88.
148. Murayama, T., Kagawa, K., and Oba, F., 1999, Computer-aided redesign for improving recyclability. Proceedings of 1st IEEE International Symposium on Environmentally Conscious Design and Inverse Manufacturing, 746-751.
149. Navin-Chandra, D., 1994, The recovery problem in product design. Journal of Engineering Design, 5(1), 65-86.
150. Reimer, B., Sodhi, M.S., and Knight, W.A., 2000, Optimizing electronics end-of-life disposal costs. Proceedings of IEEE International Symposium on Electronics and the Envi-ronment, 342-347.
151. Riller, P., 1991, Wege zum recyclingfreundlichen Konstruktion von Elektrohaushaltgeraten (Roads to the design for recycling of electric household appliances). In: Recycling: Eine Herausforderung fur den Konstrukteur (Recycling: A challenge in product design). VDI-Berichte vol. 906. p. 291-321. Dusseldorf: Verein Deutscher Ingenieure (in German).
152. Salomonski, N. and Zussman, E., 1999, On-line predictive model for disassembly planning adaptation. Robotics and Computer Integrated Manufacturing, 15, 211-220.
153. Samel, R., 2001, Materials in cars: Options for change. Materials Technology & Advanced Performance Materials, 16(1), 4-7.
154. Scholz-Reiter, B. and Scharke, H., 1997, Implementation and testing of a reactive disassembly planner. In: Krause, F.L. and Seliger, G. (eds.), Life cycle Networks, Proceedings of 4th CIRP International Seminar on Life-Cycle Engineering, 378-387.
155. Schuckert, M., 1993, Die ganzheitliche Bilanzierung am Beispiel des Systems Automobil (The gross energy balance in the example of the car). In: Kumulierte Energie-und Stoffbilanzen -ihre Bedeutung fur Okobilanzen (Gross energy and materials balances, their significance to LCA). VDI-Berichte vol. 1093. p. 57-71. Dusseldorf: Verein Deutscher Ingenieure (in German).
156. Shu, L.H. and Flowers, W.C., 1999, Application of a design-for-remanufacture framework to the selection of product life cycle fastening and joining methods. Robotics and Computer Integrated Manufacturing, 15, 179-190.
157. Smith, D., Small, M., Dodds, R., Amagai, S., and Strong, T., 1995, Computer monitor recycling: A case study. Proceedings of IEEE Conference on Clean Electronics Products and Technology (CONCEPT), 124-128.
158. Sodhi, M.S. and Knight, W.A., 1998, Product design for disassembly and bulk recycling. Annals of the CIRP, 47(1), 115-118.
159. Stoop, M.L.M. and Lambert, A.J.D., 1998, Processing of discarded refrigerators in the Netherlands. Technovation, 18(2), 101-110.
160. Suarez, R. and Lee, S., 1997, Towards a standard cost measure of assembly operations. Proceedings of IEEE International Conference on Robotics and Automation, 620-625.
161. Tillman, A.M., Ekvall, T., Baumann, H., and Rydberg T., 1994, Choice of system boundaries in life cycle assessment. Journal of Cleaner Production, 2(1), 21-29.
162. Tsoulfas, G.T., Pappis, C.P., and Minner, S., 2002, An environmental analysis of the reverse supply chain of SLI batteries. Resources, Conservation and Recycling, 36, 135-154.
163. Veerakamolmal, P. and Gupta, S.M., 1998, Optimal analysis of lot size balancing for multi-products selective disassembly. International Journal of Flexible Automation and Integrated Manufacturing, 6(3/4), 245-269.
164. Veerakamolmal, P. and Gupta, S.M., 1999, Analysis of design efficiency for the disassembly of modular electronic products. Journal of Electronics Manufacturing, 9(1), 79-95.
165. Veerakamolmal, P. and Gupta, S.M., 2000, Design for disassembly, reuse and recycling. In: Goldberg, L. (ed.), Green Electronics/Green Bottom Line: Environmentally Responsible Engineering. Newnes: Butterworth-Heinemann, Chapter 5, p. 69-82.
166. Wang, M.H. and Johnson, M.R., 1995, Design for disassembly and recyclability: A concurrent engineering approach. Concurrent Engineering, 3(2), 131-134.
167. Zandin, K.B., 1980, MOST Work Measurement Systems. New York: Marcel Dekker.
168. Zussman, E., Kriwet, A., and Seliger, G., 1994, Disassembly-oriented assessment methodology to support design for recycling. Annals of the CIRP, 43(1), 9-14.
169. Abramowitz, M. and Stegun, I.A., 1968, Handbook of Mathematical Functions, New York: Dover Publications.
170. Aleksander, I., Farreny, H. and Ghallab, M., 1983, Decision and Intelligence. In P. Coiffet (ed), Robot technology series (London, UK: Kogan Page), 6, chapters 6 and 7
171. Baldwin, D.F., Abell, T.E., Lui, M.M., De Fazio, T.L., and Whitney, D.E., 1991, An integrated computer aid for generating and evaluating assembly sequences for mechanical products. IEEE Transactions on Robotics and Automation, 7, 78-94.
172. Ben-Arieh, D. and Kramer, B., 1994, Computer-aided process planning for assembly: Generation of assembly operations sequence. International Journal of Production Research, 32(3), 643-656.
173. Bonneville, F., Henrioud, J.M. and Bourjault, A., 1995, Generation of assembly sequences with ternary operations. Proceedings of 1995 IEEE International Symposium on Assembly and Task Planning, 245-249.
174. Boothroyd, G., Poli, C., and Murch, L.E., 1982, Automatic Assembly. In G. Boothroyd (ed.), Manufacturing and Materials Processing, Volume 6. New York: Marcel Dekker. p. 280-283.
175. Bourjault, A., 1984, Contribution a une approche methodologique de l’assemblage automa-tise: Elaboration automatique des sequences operatoires, (Contribution to a systematic approach of automatic assembly: Automatic determination of operation sequences). Ph.D. Thesis, Besanson, France: Universite de Franche-Comte, (in French).
176. Bratcu, A., 2001, Determination systematique des graphes de precedence et equilibrage des lignes d’assemblage (Systematic determination of precedence graphs and assembly line balancing). Ph.D Thesis, Besanson, France: Universite de Franche-Comte, (in French).
177. De Fazio, T.L. and Whitney, D.E., 1987, Simplified generation of all mechanical assembly sequences. IEEE Journal of Robotics and Automation, RA-3(6), 640-658.
178. Fox, B.R. and Kempf, K.G., 1985, Opportunistic scheduling for robotic assembly. Proceedings of 1985 IEEE International Conference on Robotics and Automation, 880-889.
179. Gottipolu, R.B. and Ghosh, K., 1997, Representation and selection of assembly sequences in computer-aided process planning. International Journal of Production Research, 35(12), 3447-3465.
180. Gradshteyn, I.S. and Ryzhik, I.M., 1981, Table of Integrals, Series, and Products, New York: Academic Press.
181. Gungor, A. and Gupta, S.M., 2002, Disassembly line in product recovery. International Journal of Production Research, 40(11), 2569-2589.
182. Henrioud, J.M., 1989, Contribution a la conceptualisation de l’assemblage automatisee (Contribution to the theory of automatic assembly). Ph.D. Thesis, Besanson, France: Universite de Franche-Comte, (in French).
183. Hillier, F.S. and Lieberman, G.J., 2001, Introduction to Operations Research, 7th edition, New York: McGraw-Hill.
184. Homem De Mello, L.S. and Sanderson, A.C., 1990, AND/OR graph representation of assembly plans. IEEE Transactions on Robotics and Automation, 6(2), 188-189.
185. Homem De Mello, L.S. and Sanderson, A.C., 1991, A correct and complete algorithm for the generation of mechanical assembly sequences. IEEE Transactions on Robotics and Automation, 7(2), 228-240.
186. Krikke, H.R., Van Harten, A. and Schuur, PC., 1998, On a medium term product recovery and disposal strategy for durable assembly products. International Journal of Production Research, 36(1), 111-139.
187. Krikke, H.R., Van Harten, A. and Schuur, PC., 1999, Business case Roteb: Recovery strategies for monitors. Computers and Industrial Engineering, 36(4), 739-757.
188. Lambert, A.J.D., 1997, Optimal disassembly of complex products. International Journal of Production Research, 35(9), 2509-2523.
189. Lambert, A.J.D., 1999, Linear programming in disassembly/clustering sequence generation. Computers and Industrial Engineering, 36, 723-738.
190. Lambert, A.J.D. and Gupta, S.M., 2002, Demand-driven disassembly optimisation for electronic consumer goods. Journal of Electronics Manufacturing, 11(2), 121-135.
191. Lambert, A.J.D., 2002, Determining optimum disassembly sequences in electronic equipment. Computers and Industrial Engineering, 43, 553-575.
192. Moore, K.E., Gungor, A., and Gupta, S.M., 2001, Petri net approach to disassembly process planning for products with complex AND/OR precedence relationships. European Journal of Operations Research, 135, 428-449.
193. Prenting, T.O. and Battaglin, R.M., 1964, The precedence diagram: A tool for analysis in assembly line balancing. The Journal of Industrial Engineering, 15(4), 208-213.
194. Relange, L. and Henrioud, J.M., 2001, Systematic determination of assembly state transition diagrams. Proceedings of 4th IEEE International Symposium on Assembly and Task Planning. 55-60.
195. Schweikard, A. and Schwarzer, F., 1997, General translational assembly planning. Proceedings of the 1997 IEEE International Conference on Robotics and Automation, 612-619.
196. Sloane, N.J.A., 2003, The Gn-line Encyclopedia of Integer Sequences. AT&T Research. Available on Internet via: Http://www.research.att.com/~njas/sequences
197. Tovey, C.A., 2002, Tutorial on Computational Complexity. Interfaces, 32(3), 30-61.
198. Veerakamolmal, P. and Gupta, S.M., 1998, Optimal analysis of lot size balancing for multi-products selective disassembly. International Journal of Flexible Automation and Integrated Manufacturing, 6(3/4), 245-269.
199. Veerakamolmal, P. and Gupta, S.M., 1999, Analysis of design efficiency for the disassembly of modular electronic products. Journal of Electronics Manufacturing, 9(1), 79-95.
200. Whitney, D.E., 2001, Assembly in the 21st Century. Oral presentation at the International Symposium on Assembly and Task Planning.
201. Wolter, J.D., 1992, A combinatorial analysis of enumerative data structures for assembly planning. Journal of Design and Manufacturing, 2(2), 93-104.
202. Woo, T.C. and Dutta, D., 1991, Automatic disassembly and total ordering in three dimensions. Journal of Engineering for Industry, 113, 207-213.
203. Armillotta, A. and Semeraro, Q., 1997, Assessment of destructive operations in disassembly process planning. International Journal of Flexible Automation and Integrated Manufacturing, 5(1&2), 57-78.
204. Baldwin, D.F., Abell, T.E., Lui, M.M., De Fazio, T.L., and Whitney, D.E., 1991, An integrated computer aid for generating and evaluating assembly sequences for mechanical prod-ucts. IEEE Transactions on Robotics and Automation, 7, 78-94.
205. Bhatia, P., Karnick, H., and Ghosh, A., 1996, A configuration space based approach for robot assembly sequencing. Robotica, 14, 633-645.
206. Bonneville, F., Henrioud, J.M., and Bourjault, A., 1995, Generation of assembly sequences with ternary operations. Proceedings of 1995 IEEE International Symposium on Assembly and Task Planning, 245-249.
207. Bourjault, A., 1984, Contribution a une approche methodologique de l’assemblage automatise: Elaboration automatique des sequences operatoires (Contribution to a systematic approach of automatic assembly: Automatic generation of task sequences). Ph.D. Thesis, Besanson, France: Universite de Franche-Comte, (in French).
208. Bourjault, A., 1987, Methodology of assembly automation: A new approach. Abstracts of 2nd International Conference on Robotics and Factories of the Future, San Diego, CA, 37-45.
209. Bratcu, A., 2001, Determination systematique des graphes de precedence et equilibrage des lignes d’assemblage (Systematic determination of precedence graphs and assembly line balancing). Ph.D. Thesis, Besanson, France: Universite de Franche-Comte, (in French).
210. Chen, S.-F., Oliver, J.H., Chou, S.-Y. and Chen, L.-L., 1997, Parallel disassembly by onion peeling. Journal of Mechanical Design, 119, 267-274.
211. Choi, C.K., Zha, X.F., NG, T.L., and Lau, W.S., 1998, On the automatic generation of product assembly sequences. International Journal of Production Research, 36(3), 617-633.
212. De Fazio, T.L. and Whitney, D.E., 1987, Simplified generation of all mechanical assembly sequences. IEEE Journal of Robotics and Automation, RA-3(6), 640-658.
213. De Floriani, L. and Nagy, G., 1989, A graph model for face-to-face assembly. Proceedings of 1989 IEEE International Conference on Robotics and Automation, 75-78.
214. Delchambre, A., 1990, A pragmatic approach to computer-aided assembly planning. Proceedings of IEEE International Conference on Robotics and Automation, 1600-1605.
215. Delchambre, A. and Gaspart, P., 1992, KBAP: An industrial prototype of knowledge-based assembly planner. Proceedings of IEEE International Conference on Robotics and Automation, 2404-2411.
216. Dini, G. and Santochi, M., 1992, Automated sequencing and subassembly detection in assembly planning. Annals of the CIRP, 41(1), 1-4.
217. Dutta, D. and Woo, T.C., 1995, Algorithm for multiple disassembly and parallel assemblies. Journal of Engineering for Industry, 117, 102-109.
218. Erdos, G., Kis, T., and Xirouchakis, P., 2001, Modelling and evaluating product end-of-life options. International Journal of Production Research, 39(6), 1203-1220.
219. Fox, B.R. and Kempf, K.G., 1985, Opportunistic scheduling for robotic assembly. Proceedings of 1985 IEEE International Conference on Robotics and Automation, 880-889.
220. Frommherz, B. and Hornberger, J., 1988, Automatic generation of precedence graphs. Proceedings of 13th International Symposium on Industrial Robots, Lausanne, CH, 453-466.
221. Garcia, M.A., Larre, A., Lopez, B., and Oller, A., 2000, Reducing the complexity of geometric selective disassembly. Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, 1474-1479.
222. Gungor, A. and Gupta, S.M., 2001a, Disassembly sequence plan generation using a branch-and-bound algorithm. International Journal of Production Research, 39(3), 481-509.
223. Gungor, A. and Gupta, S.M., 2001b, A solution approach to the disassembly line balancing problem in the presence of task failures. International Journal of Production Research, 39(7), 1427-1467.
224. Gungor, A. and Gupta, S.M., 2002, Disassembly line in product recovery. International Journal of Production Research, 40(11), 2569-2589.
225. Homem De Mello, L.S. and Sanderson, A.C., 1990, AND/OR graph representation of assembly plans. IEEE Transactions on Robotics and Automation, 6(2), 188-189.
226. Homem De Mello, L.S., and Sanderson, A.C., 1991, A correct and complete algorithm for the generation of mechanical assembly sequences. IEEE Transactions on Robotics and Automation, 7(2), 228-240.
227. Huang, Y.F. and Lee, C.S.G., 1989, Precedence knowledge in feature mating operation assembly planning. Proceedings of 1989 IEEE International Conference on Robotics and Automation, 216-221.
228. Huang, Y.F. and Lee, C.S.G., 1990, An automatic assembly planning system. Proceedings of 1990 IEEE International Conference on Robotics and Automation, 1594-1599.
229. Huang, Y.F. and Lee, C.S.G., 1991, A framework of knowledge-based assembly planning. Proceedings of 1989 IEEE International Conference on Robotics and Automation, 599-604.
230. Kroll, E., 1993, Modelling and reasoning for computer-based assembly planning. In: A. Kusiak (ed), Concurrent engineering: Automation, Tools, and Techniques. New York: Wiley-Interscience, chapter 8, pp. 177-205.
231. Lambert, A.J.D., 2000, Optimum disassembly sequence generation. Proceedings of2000 SPIE Conference of Environmentally Conscious Manufacturing, 56-67.
232. Lambert, A.J.D., 2001, Automatic determination of transition matrices in optimal disassembly sequence generation. Proceedings of 4th IEEE International Symposium on Assembly and Task Planning, 220-225.
233. Lambert, A.J.D., 2002a, Generation of assembly graphs by systematic analysis of assembly structures. Proceedings of IFAC 15th World Congress on Automatic Control, Barcelona, Spain (CD-ROM).
234. Lambert, A.J.D., 2002b, Determining optimum disassembly sequences in electronic equip-ment. Computers and Industrial Engineering, 43, 553-575.
235. Lee, S., 1989, Disassembly planning based on subassembly extraction. Proceedings of 3rd ORSA/TIMS Conference on Flexible Manufacturing Systems: Operations Research Models and Applications, 383-388.
236. Lee, S. and Shin, Y.G., 1990a, A cooperative planning system for flexible assembly. Proceedings of Rensselaer’s 2nd International Conference on Computers and Intelligent Manufacturing, 306-313.
237. Lee S. and Shin, Y.G., 1990b, Assembly planning based on subassembly extraction. Proceedings of 1990 IEEE Conference on Robotics and Automation, 1606-1611.
238. Lee S. and Moradi, H., 1999, Disassembly sequencing and assembly sequence verification using force flow networks. Proceedings of 1999 IEEE International Conference on Robotics and Automation, 2762-2767.
239. Lin, A.C. and Chang, T.C., 1993, An integrated approach to automated assembly planning for three-dimensional mechanical products. International Journal of Production Research, 31(5), 1201-1227.
240. Miller, J.M. and Stockman, G.C., 1990, Precedence constraints and tasks: How many task orderings? Proceedings of IEEE International Conference on Systems Engineering, 408-411.
241. Minzu, V., Bratcu, A., and Henrioud, J.M., 1999, Construction of the precedence graphs equivalent to a given set of assembly sequences. Proceedings of 1999 IEEE International Conference on Assembly and Task Planning, 14-19.
242. Moore K.E., Gungor, A., and Gupta, S.M., 2001, Petri net approach to disassembly process planning for products with complex AND/OR precedence relationships. European Journal of Operations Research, 135, 428-449.
243. Murayama, T., Oba, F., and Abe, S., 1994, Assembly partitioning by genetic algorithm for generating assembly sequences efficiently. Advancement of Intelligent Production, 695-700.
244. Murayama, T., Oba, F., Abe, S., and Yamamichi, Y., 2001, Disassembly sequence generation using information entropy and heuristics. Proceedings of 4th IEEE International Symposium on Assembly and Task Planning, 208-213.
245. Ong, N.S. and Wong, Y.C., 1999, Automatic subassembly detection from a product model for disassembly sequence generation. International Journal of Manufacturing Technology, 15, 425-431.
246. Rajan, V.N. and Nof, S.Y., 1996, Minimal precedence constraints for integrated assembly and execution planning. IEEE Transactions on Robotics and Automation, 12(2), 175-186.
247. Seow K.T. and Devanathan R., 1994, A temporal framework for assembly sequence representation and analysis. IEEE Transactions on Robotics and Automation, 10(2), 220-229.
248. Silva, J. and Chang, K.H., 2002, Design parameterization for concurrent design and manufacturing of mechanical systems. Concurrent Engineering, 10(1), 3-14.
249. Srinivasan, H. and Gadh, R., 1998a, Complexity reduction in geometric selective disassembly using the wave propagation abstraction. Proceedings of IEEE International Conference on Robotics and Automation, vol. 2, 1478-1483.
250. Srinivasan, H. and Gadh, R., 1998b, A geometric algorithm for single selective disassembly using the wave propagation abstraction. Computer-Aided Design, 30(8), 603-613.
251. Srinivasan, H., Figueroa, R., and Gadh, R., 1999, Selective disassembly for virtual prototyping as applied to de-manufacturing. Robotics and Computer-Integrated Manufacturing, 15, 231-245.
252. Srinivasan, H. and Gadh, R., 2000, Efficient geometric disassembly of multiple components from an assembly using wave propagation. Journal of Mechanical Design, 122, 179-184.
253. Srinivasan, H. and Gadh, R., 2002, A non-interfering selective disassembly sequence for components with geometric constraints. IIE Transactions, 34, 349-361.
254. Subramani, A.K. and Dewhurst, P., 1991, Automatic generation of product disassembly sequences. Annals of the CIRP, 40(1), 115-118.
255. Swaminathan, A. and Barber, K.S., 1996, An experience-based assembly sequence planner for mechanical assemblies. IEEE Transactions on Robotics and Automation, 12(2), 252-267.
256. Swaminathan, A., Shaikh, S.A., and Barber, K.S., 1998, Design of an experience-based assembly sequence planner for mechanical assemblies. Robotica, 16, 265-283.
257. Tseng, Y.J. and Liou, L.C., 2000, Integrating assembly and machining planning using graph-based representation models. International Journal of Production Research, 38(12), 2619-2641.
258. Uchiyama, N., Arai E., and Igoshi, M., 1994, Generation of mechanical assembly sequences considering different evaluation viewpoints. In: E. Usui (ed.), Advancement of Intelligent Production, Elsevier Science, Amsterdam 701-706.
259. Viswanathan, S. and Allada, V., 2001, Configuration analysis to support product redesign for end-of-life disassembly. International Journal of Production Research, 39(8), 1733-1753.
260. Vujosevic, R., 1995, Maintainability analysis in concurrent engineering of mechanical sys-tems. Concurrent Engineering, 3(1), 61-73.
261. Vujosevic, R., Raskar, R., Yetekuri, N.V., Jothishankar, M.C., and Juang, S.H., 1995, Simulation, animation, and analysis of design disassembly for maintainability analysis. International Journal of Production Research, 33(11), 2999-3022.
262. Waarts, J.J., Boneschanscher, N., and Bronsvoort W.F., 1992, A semi-automatic assembly sequence planner. Proceedings of 1992 IEEE International Conference on Robotics and Automation, 2431-2438.
263. Wilson, R.H., 1995, Minimising user queries in interactive assembly planning. IEEE Transactions on Robotics and Automation, 11(2), 308-312.
264. Wilson, R.H. and Rit, J.F., 1990, Maintaining geometric dependencies in an assembly planner. Proceedings of 1990 IEEE International Conference on Robotics and Automation, 890-895.
265. Wilson, R.H. and Schweikard, A., 1992, Assembling polyhedra with single translations. Proceedings of 1992 IEEE International Conference on Robotics and Automation, 2392-2397.
266. Wolter, J.D., 1989, On the automatic generation of assembly plans. Proceedings of1989 IEEE International Conference on Robotics and Automation, 62-68.
267. Woo, T.C. and Dutta, D., 1991, Automatic disassembly and total ordering in three dimensions. Journal of Engineering for Industry, 113, 207-213.
268. Yokota, K. and Brough, D.R., 1992, Assembly/disassembly sequence planning. Assembly Automation, 12(3), 31-38.
269. Abe, S., Murayama, T., Oba, F., and Narutaki, N., 1999, Stability check and reorientation of subassemblies in assembly planning. Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics, 2, 486-491.
270. Chen, S.-F., Oliver, J.H., Chou, S.-Y., and Chen, L.-L., 1997, Parallel disassembly by onion peeling. Journal of Mechanical Design, 119, 267-274.
271. De Lit, P., 2001, A comprehensive and integrated approach for the design of a product family and its assembly system. Ph.D. Thesis, Universite Libre de Bruxelles.
272. De Lit, P., Latinne, P., Rekiek, B., and Delchambre, A., 2001, Assembly planning with an ordering genetic algorithm. International Journal of Production Research, 39(16), 3623-3640.
273. Dini, G. and Santochi, M., 1992, Automated sequencing and subassembly detection in assembly planning. Annals of the CIRP, 41(1), 1-4.
274. Dutta, D. and Woo, T.C., 1995, Algorithm for multiple disassembly and parallel assemblies. Journal of Engineering for Industry, 117, 102-109.
275. Eng, T.H., Ling, Z.K., Olson, W., and McLean, C., 1999, Feature-based assembly modeling and sequence generation. Computers and Industrial Engineering, 36(1), 17-33.
276. Garcia, M.A., Larre, A., Lopez, B., and Oller, A., 2000, Reducing the complexity of geometric selective disassembly. Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, 1474-1479.
277. Gu, P. and Yan, X., 1995, CAD-directed automatic assembly sequence planning. International Journal of Production Research, 33(11), 3069-3100.
278. Gu, P. and Sosale, S., 1999, Product modularization for life cycle engineering. Robotics and Computer Integrated Manufacturing, 15, 387-401.
279. Gungor, A. and Gupta, S.M., 2001a, Disassembly sequence plan generation using a branch-and-bound algorithm. International Journal of Production Research, 39(3), 481-509.
280. Gungor, A. and Gupta, S.M., 2001b, A solution approach to the disassembly line balancing problem in the presence of task failures. International Journal of Production Research, 39(7), 1427-1467.
281. Hoffman, R., 1990a, Assembly planning for B-rep objects. Proceedings of IEEE Rensselaer’s 2nd International Conference on Computer Integrated Manufacturing, 314-321.
282. Hoffman, R., 1990b, Automated assembly planning for B-rep objects. Proceedings of IEEE International Conference on Systems Engineering, 391-334.
283. Huang, Y.M. and Huang, C.T., 2002, Disassembly matrix for disassembly processes of products. International Journal of Production Research, 40(2), 255-273.
284. Jovane, F., Semeraro, Q., and Armillotta, A., 1997, Computer-aided disassembly planning as a support to product redesign. In: Krause, F.L. and Seliger, G., (eds.), Life-cycle networks: Proceedings of 4th CIRP International Seminar on Life-Cycle Engineering, 388-399. London: Chapman and Hall.
285. Knight, W.A., 1996, Software tools to evaluate cost benefits and environmental impact of designing for disassembly, recycling and the environment. Design for the 21st Century Technical Papers, Regional Technical Conference, Society of Plastics Engineers, Brookfield CT, 27-38.
286. Kroll, E., 1993, Modelling and reasoning for computer-based assembly planning. In: A. Kusiak (ed), Concurrent engineering: Automation, tools, and techniques, New York: Wiley-Interscience, chapter 8, pp. 177-205.
287. Kroll, E., Beardsley, B., and Parulian, A., 1996, A methodology to evaluate ease of disassembly for product recycling. IIE Transactions, 28, 837-845.
288. Kroll, E. and Carver, B.S., 1999, Disassembly analysis through time estimation and other metrics. Robotics and Computer Integrated Manufacturing, 15, 191-200.
289. Kuo, T.C., 2000, Disassembly sequence and cost analysis for electromechanical products. Robotics and Computer Integrated Manufacturing, 16, 43-54.
290. Kuo, T.C., Zhang, H.C., and Huang, S.H., 2000, Disassembly analysis for electromechanical products: A graph-based heuristic approach. International Journal of Production Research, 38(5), 993-1007.
291. Lambert, A.J.D., 1999, Disassembly process modelling: Problems and solutions concerning their adaptation to practice, Proceedings of 15th International Conference on Computer-Aided Production Engineering CAPE’99, Durham, UK, 485-492.
292. Laperriere, L. and ElMaraghy, H.A., 1992, Planning of products assembly and disassembly. Annals of the CIRP, 41(1), 5-9.
293. Laperriere, L. and ElMaraghy, H.A., 1994, Assembly sequences planning for simultaneous engineering applications. International Journal of Advanced Manufacturing Technology, 9, 231-244.
294. Laperriere, L. and ElMaraghy, H.A., 1996, GAPP: A generative assembly process planner. Journal of Manufacturing Systems, 15(4), 282-293.
295. Laperriere, L. and Lavoie, A., 1997, Evaluating subassembly stability using stability directed subgraphs. International Journal of Computer Applications in Technology, 10(5/6), 348-360.
296. Lee, S., 1989, Disassembly planning based on subassembly extraction. Proceedings of 3rd ORSA/TIMS Conference on Flexible Manufacturing Systems: Operations Research Models and Applications, 383-388.
297. Lee, S. and Shin, Y.G., 1990a, A cooperative planning system for flexible assembly. Proceedings of Rensselaer’s 2nd International Conference on Computers and Intelligent Manufacturing, 306-313.
298. Lee, S. and Shin, Y.G., 1990b, Assembly planning based on subassembly extraction. Proceedings of 1990 IEEE Conference on Robotics and Automation, 1606-1611.
299. Lee, Y.Q. and Kumara, S.R.T., 1992, Individual and group disassembly sequence generation through freedom and interference spaces. Journal of Design and Manufacturing, 2, 143-154.
300. Lee, S., 1992, Backward assembly planning with assembly cost analysis. Proceedings of 1992 IEEE International Conference on Robotics and Automation, 2382-2391.
301. Lee, K.M. and Bailey-Van Kuren, M.M., 1997, Supervisory control of an automated disassembly workcell based on blocking topology. Proceedings of1997 IEEE International Conference on Robotics and Automation, 1523-1528.
302. Lee, K. and Gadh, R., 1998, Destructive disassembly to support virtual prototyping. IIE Transactions, 30(10), 959-972.
303. Lee, S. and Moradi, H., 1999, Disassembly sequencing and assembly sequence verification using force flow networks. Proceedings of 1999 IEEE International Conference on Robotics and Automation, 2762-2767.
304. Lee, K.M. and Bailey-Van Kuren, M.M., 2000, Modeling and supervisory control of a disassembly automation workcell based on blocking topology. IEEE Transactions on Robotics and Automation, 16(1), 67-77.
305. Mascle, C. and Figour, J., 1990, Methodological approach of sequences determination using the disassembly method. Proceedings of IEEE Rensselaer’s 2nd International Conference on Computer Integrated Manufacturing, 483-490.
306. Mascle, C., 1992, Determination automatique a propos des sous-assemblages (automatic determination of subassemblies). Automatique Productique Informatique Industrielle, 26(2), 167-192. (in French).
307. Mascle, C., 1995, Features modeling in assembly sequence and resource planning. Proceedings of IEEE International Symposium on Assembly and Task Planning, 232-237.
308. Mascle, C., 1998, Automatic apriori, a posteriori or appropriate determination of subassemblies. International Journal of Production Research, 36(4), 1001-1021.
309. Mascle, C., 1999, Feature-based assembly model and multi-agents system structure for computer-aided assembly. Proceedings of1999 IEEE International Symposium on Assembly and Task Planning, 8-13.
310. Mascle, C. and Balasoiu, B.A., 2001, Disassembly-assembly sequencing using feature-based life-cycle model. Proceedings of 2001 IEEE International Symposium on Assembly and Task Planning, 31-36.
311. Mattikali, R., Baraff, D., and Khosla, P., 1994, Finding all gravitationally stable orientations of assemblies. Proceedings of 1994 IEEE International Conference on Robotics and Automation, 251-257.
312. Mattikali, R., Baraff, D., and Khosla, P., 1995, Gravitational stability of frictionless assemblies. IEEE Transactions on Robotics and Automation, 11(3) 374-388.
313. Mattikali, R., Baraff, D., and Khosla, P., 1996, Finding all stable orientations of assemblies with friction. IEEE Transactions on Robotics and Automation, 12(2) 290-301.
314. Moore, K.E., Gungor, A., and Gupta, S.M., 1998a, Disassembly process planning using Petri nets. Proceedings of 1998 IEEE Conference on Electronics and the Environment, 88-93.
315. Moore, K.E., Gungor, A., and Gupta, S.M., 1998b, A Petri net approach to disassembly process planning. Computers and Industrial Engineering, 35(1-2), 165-168.
316. Moore, K.E., Gungor, A., and Gupta, S.M., 1998c, Disassembly Petri net generation in the presence of XOR precedence relationships. Proceedings of 1998 IEEE International Conference on Systems, Man, and Cybernetics, 13-18.
317. Moore K.E., Gungor, A., and Gupta, S.M., 2001, Petrinet approach to disassembly process planning for products with complex AND/OR precedence relationships. European Journal of Operations Research, 135, 428-449.
318. Nnaji, B.O., 1993, Program synthesis and other planners, Theory of Automatic Robot Assembly and Programming. London: Chapman and Hall. Chapter 11, 267-299.
319. Oliver, J.H. and Huang, H.T., 1994, Automated path planning for integrated assembly design. Computer-Aided Design, 26(9), 658-666.
320. Ong, N.S. and Wong, Y.C., 1999, Automatic subassembly detection from a product model for disassembly sequence generation. International Journal of Manufacturing Technology, 15, 425-431.
321. Onozuka, M., Kanai, S., and Takahashi, H., 1994, Computer aided evaluation of assembly sequences based on the analysis of methods time measurement and design for assembly. Advances in Intelligent Production, 707-712.
322. O’Shea B., Kaebernick H., and Grewal, S.S., 2000, Using a cluster graph representation of products for application in the disassembly planning process. Concurrent Engineering, 8(3), 158-170.
323. Quian, W.H. and Pagello, E., 1994, On the scenario and heuristics of disassemblies. Proceedings of 1994 IEEE International Conference on Robotics and Automation, 264-271.
324. Rajan, V.N. and Nof, S.Y., 1996, Minimal precedence constraints for integrated assembly and execution planning. IEEE Transactions on Robotics and Automation, 12(2), 175-186.
325. Sere, A.T., Laperriere, L., and Mascle, C., 1995, Automatic identification of available grasping and fixturing surfaces in assembly resources planning, Proceedings of INRIA/IEEE Symposium on Emerging Technologies and Factory Automation, 69-77.
326. Shin, C.K. and Cho, H.S., 1994, On the generation of robotic assembly sequences based on separability and assembly motion stability. Robotica, 12, 7-15.
327. Shyamsundar, N. and Gadh, R., 1996, Selective disassembly of virtual prototypes. Proceedings of 1996 IEEE International Conference on Systems, Man, and Cybernetics, 3159-3164.
328. Shyamsundar, N., Ashai, Z., and Gadh, R., 1998, Geometry-based metric formulation and methodology to support virtual design for disassembly. Engineering Design and Automation, 4(1), 13-26.
329. Siddique, Z. and Rosen, D.W., 1997, A virtual prototyping approach to product disassembly reasoning. Computer-Aided Design, 29(12), 847-860.
330. Srinivasan, H., Shyamsundar, N., and Gadh, R., 1997, A framework for virtual disassembly analysis. Journal of Intelligent Manufacturing, 8(4), 277-295.
331. Swaminathan, A. and Barber, K.S., 1996, An experience-based assembly sequence planner for mechanical assemblies. IEEE Transactions on Robotics and Automation, 12(2), 252-267.
332. Swaminathan, A., Shaikh, S.A., and Barber, K.S., 1998, Design of an experience-based assembly sequence planner for mechanical assemblies. Robotica, 16, 265-283.
333. Tanaka, M., Iwama, K., and Watanabe, T., 1996, A method of generating assembly plans by assembly matrices. Proceedings of ASME Japan/USA Symposium on Flexible Automation, 2, 803-806.
334. Tseng, Y.J. and Liou, L.C., 2000, Integrating assembly and machining planning using graph-based representation models. International Journal of Production Research, 38(12), 2619-2641.
335. Veerakamolmal, P. and Gupta, S.M., 2002, A case-based reasoning approach for automating disassembly process planning. Journal of Intelligent Manufacturing, 13(1), 47-60.
336. Venuvinod, P.K., 1993, Automated analysis of 3-D polyhedral assemblies: Assembly directions and sequences. Journal of Manufacturing Systems, 12(3), 246-252.
337. Woo, T.C. and Dutta, D., 1991, Automatic disassembly and total ordering in three dimensions. Journal of Engineering for Industry, 113, 207-213.
338. Yan, X. and Gu P., 1995, Assembly/disassembly sequence planning for life-cycle cost estimation. ASME Manufacturing Science and Engineering, 935-956.
339. Zhang, H.C. and Kuo, T.C., 1996, A graph-based approach to disassembly model for end-of-life product recycling. Proceedings of IEEE/CPMT International Electronic Manufacturing Technology (IEMT) Symposium, 247-254.
340. Zhang, H.C. and Yu, S.Y., 1997, An environmentally conscious evaluation/design support tool for personal computers. Proceedings of IEEE International Symposium on Electronics and the Environment, 5, 131-136.
341. Zhou, M.C., Caudill, R.J., and He, X., 1998, Evaluation of environmentally conscious product designs. Proceedings of 1998 IEEE International Conference on Systems, Man, and Cybernetics, 4, 4057-4062.
342. Baldwin, D.F., Abell, T.E., Lui, M.M., De Fazio, T.L., and Whitney, D.E., 1991, An integrated computer aid for generating and evaluating assembly sequences for mechanical products. IEEE Transactions on Robotics and Automation, 7, 78-94.
343. Bisschop, J. and Entriken, R., 1993, AIMMS, the Modeling System. Paragon Decision Technology Haarlem, The Netherlands.
344. Bourjault, A., Chappe, D., and Henrioud, J.M., 1987, Elaboration automatique des gammes d’assemblage a l’aide de resaux de Petri (Automatic determination of assembly sequence with Petri nets). RAIRO(APII), 21, 323-342 (in French; Abstract in English).
345. Caccia, C. and Pozzetti, A., 2000, A genetic algorithm for disassembly strategy definition. Proceedings of SPIE Conference on Environmentally Conscious Manufacturing, 68-77.
346. Clegg, A.J., Williams, D.J., and Uzsoy, R., 1995, Production planning for companies with remanufacturing capability. Proceedings of IEEE International Symposium on Electronics and the Environment, 186-191.
347. Dekker, R., Fleischmann, M., Inderfurth, K., and Van Wassenhove, L.N., 2004, Reverse Logistics, Quantitative Models for Closed-Loop Supply Chains. Springer-Verlag Berlin (D).
348. Guide, V.D.R., Srivastava, R., and Spencer M.S., 1997a, An evaluation of capacity planning techniques in a remanufacturing environment. International Journal of Production Research, 35(1), 67-82.
349. Guide, V.D.R., Srivastava, R., and Kraus M.E., 1997b, Product structure complexity and scheduling of operations in recoverable manufacturing. International Journal of Production Research, 35(11), 3179-3199.
350. Guide, V.D.R., Jayaraman, V., and Srivastava, R., 1999, The effect of lead time variation on the performance of disassembly release mechanisms. Computers and Industrial Engineering, 36, 759-779.
351. Gungor, A. and Gupta, S.M., 1997, An evaluation methodology for disassembly processes. Computers and Industrial Engineering, 33(1-2), 329-332.
352. Gungor, A. and Gupta, S.M., 2001, Disassembly sequence plan generation using a branch-and-bound algorithm. International Journal of Production Research, 39(3), 481-509.
353. Gupta, S.M. and Taleb, K.N., 1994, Scheduling disassembly. International Journal of Production Research, 32(8), 1857-1866.
354. Homem De Mello, L.S. and Sanderson, A.C., 1990, AND/OR graph representation of assembly plans. IEEE Transactions on Robotics and Automation, 6(2), 188-189.
355. Homem De Mello, L.S. and Sanderson, A.C., 1991, A correct and complete algorithm for the generation of mechanical assembly sequences. IEEE Transactions on Robotics and Automation, 7(2), 228-240.
356. Hoshino, T., Yura, K., and Hitomi, K., Optimization analysis for recycle-oriented manufacturing systems. International Journal of Production Research, 33, 2069-2078.
357. Johnson, M.R. and Wang, M.H., 1998, Economical evaluation of disassembly operations for recycling, remanufacturing and reuse. International Journal of Production Research, 36(12), 3227-3252.
358. Kanehara, T., Suzuki, T., Inaba, A., and Okuma, S., 1993, On algebraic and graph structural properties of assembly Petri net. Proceedings. of the 1993 IEEE/RSJ International Conference on Intelligent Robots and Systems, Yokohama, July 26-30, 2286-2293.
359. Kang, J.G., Lee, D.H., Xirouchakis, P., and Persson, J.G., 2001, Parallel disassembly sequencing with sequence-dependent operation times. Annals of the CIRP, 50(1), 343-346.
360. Krikke, H.R., Van Harten, A., and Schuur, P.C., 1998, On a medium term product recovery and disposal strategy for durable assembly products. International Journal of Production Research, 36(1), 111-139.
361. Krikke, H.R., Van Harten, A., and Schuur, P.C., 1999, Business case Roteb: Recovery strategies for monitors. Computers and Industrial Engineering, 36(4), 739-757.
362. Lambert, A.J.D., 1994, Optimal disassembly of complex products. Proceedings of Northeast Decision Sciences Institute, Portsmouth, NH, 74-80.
363. Lambert, A.J.D., 1997, Optimal disassembly of complex products. International Journal of Production Research, 35(9), 2509-2523.
364. Lambert, A.J.D., 1999, Linear programming in disassembly/clustering sequence generation. Computers and Industrial Engineering, 36, 723-738.
365. Lambert, A.J.D., 2002, Determining optimum disassembly sequences in electronic equipment. Computers and Industrial Engineering, 43, 553-575.
366. Lambert, A.J.D. and Gupta, S.M., 2002, Demand-driven disassembly optimisation for electronic consumer goods. Journal of Electronics Manufacturing, 11(2), 121-135.
367. Lambert, A.J.D., 2003, Optimum disassembly sequence with sequence-dependent disassembly costs. Proceedings of IEEE International Symposium on Assembly and Task Planning, 151-156.
368. Motavalli, S. and Islam, A.U., 1997, Multi-criteria assembly sequencing. Computers and Industrial Engineering, 32(4), 743-751.
369. Moore, K.E. and Gupta, S.M., 1996, Petri net models of flexible and automated manufacturing systems: A survey. International Journal of Production Research, 34, 3001-3035.
370. Navin-Chandra, D., 1994, The recovery problem in product design. Journal of Engineering Design, 5(1), 65-86.
371. Penev, K.D. and De Ron, A.J., 1996, Determination of a disassembly strategy. International Journal of Production Research, 34(2), 495-506.
372. Rosell, J., Munoz, N., and Gambin, A., 2003, Robot task sequence planning using Petri nets. Proceedings of IEEE International Symposium on Assembly and Task Planning, 24-29.
373. Shapiro, J.F., 1979, Mathematical programming: Structures and algorithms, John Wiley and Sons, New York.
374. Sloane, N.J.A., 2003, The On-line Encyclopedia of Integer Sequences. AT&T Research. Available on Internet via: Http://www.research.att.com/~njas/sequences
375. Spengler, Th., Puchert, H., Penkuhn, T., and Rentz, O., 1997, Environmental integrated production and recycling management. European Journal of Operational Research, 97, 308-326.
376. Taleb, K.N. and Gupta, S.M., 1997, Disassembly of multiple product structures. Computers and Industrial Engineering, 32(4), 949-961.
377. Taleb, K.N., Gupta, S.M., and Brennan, L., 1997, Disassembly of complex product structures with parts and materials commonality. Production Planning and Control, 8(3), 255-269.
378. Tiwari, M.K., Sinha, N., Kumar, S., Rai, R., and Mukhopadhyay, S.K., 2002, A Petri net based approach to determine the disassembly strategy of a product. International Journal of Production Research, 40(5), 1113-1129.
379. Uzsoy, R. and Venkatachalam, G., 1998, Supply chain management for companies with product recovery and remanufacturing capability. International Journal of Environmentally Conscious Design and Manufacturing, 7(1), 59-72.
380. Veerakamolmal, P. and Gupta, S.M., 1998a, Design of integrated component recovery system. Proceedings of IEEE Symposium on Electronics and the Environment, 264-269.
381. Veerakamolmal, P. and Gupta, S.M., 1998b, High-mix/low-volume batch of electronic equipment disassembly. Computers and Industrial Engineering, 35(1-2), 65-68.
382. Veerakamolmal, P. and Gupta, S.M., 1998c, Optimal analysis of lot-size balancing for multiproducts selective disassembly. International Journal of Flexible Automation and Integrated Manufacturing, 6(3-4), 245-269.
383. Veerakamolmal, P. and Gupta, S.M., 1999, Analysis of design efficiency for the disassembly of modular electronic products. Journal of Electronics Manufacturing, 9(1), 79-95.
384. Yee, S.T. and Ventura, J.A., 1999, A Petri net model to determine optimal assembly sequences with assembly operation constraints. Journal of Manufacturing Systems, 18(3), 203-213.
385. Charnes, A., Cooper, W.W., and Ferguson, R.O., 1955, Optimal estimation of executive compensation by linear programming. Management Science, 1(2), 138-151.
386. Charnes, A. and Cooper, W.W., 1961, Management Models and Industrial Applications of Linear Programming. I, John Wiley and Sons, New York.
387. Cohon, J. L., 1978, Multiobjective Programming and Planning. Mathematics in Science and Engineering, 140, Academic Press, 163-179.
388. Hwang, C.L. and Masud, A.S.M., 1979, Multiple Objective Decision Making: Methods and Applications. Springer-Verlag, Berlin.
389. Ignizio, J.P., 1976, Goal Programming and Extensions. Lexington Books, D. C. Heath and Company, Massachusetts, Toronto, London.
390. Ignizio, J.P., 1982, Linear Programming in Single and Multiple Objective Systems. Englewood Cliffs, NJ: Prentice Hall.
391. Ijiri, Y., 1965, Management Goals and Accounting for Control. Rand McNally, Chicago.
392. Kongar, E. and Gupta, S.M., 2002a, A multi-criteria decision making approach for disassembly-to-order systems. Journal of Electronics Manufacturing, 11(2), 171-183.
393. Kongar, E. and Gupta, S.M., 2002b, Disassembly-to-order system using linear physical programming. Proceedings of IEEE Symposium on Electronics and the Environment, 312-317.
394. Lambert, A.J.D. and Gupta, S.M., 2002, Demand-driven disassembly optimization for electronic consumer goods. Journal of Electronics Manufacturing, 11(2), 121-135.
395. Lambert, A.J.D., 2003, Disassembly Sequencing: A survey. International Journal of Production Research, 41(16), 3721-3759.
396. Lee, S.M., 1972, Goal Programming for Decision Analysis. Auerbach Publishers, Philadelphia.
397. Messac, A., Gupta, S.M., and Akbulut, B., 1996, Linear physical programming: Effective optimization for complex linear systems. Transactions on Operational Research, 8(2), 39-59.
398. Romero, C., 1991, Handbook of Critical Issues in Goal Programming. Oxford, Pergamon Press.
399. Schniederjans, M.J., 1995, Goal Programming: Methodology and Applications. Boston, MA: Kluwer.
400. Stadler, S., 1988, Multicriteria optimization in engineering and in the sciences. Mathematical Concepts and Methods in Science and Engineering Series, 37, Plenum Press, 120-121.
401. Steuer, R.E., 1989, Multiple Criteria Optimization: Theory, Computation, and Application. Reprint Edition, Krieger Publishing Company, Malabar, FL.
402. Veerakamolmal, P. and Gupta, S.M., 1998a, Design of integrated component recovery system. Proceedings of IEEE Symposium on Electronics and the Environment, 264-269.
403. Veerakamolmal, P. and Gupta, S.M., 1998b, High-mix/low-volume batch of electronic equipment disassembly. Computers and Industrial Engineering, 35(1-2), 65-68.
404. Veerakamolmal, P. and Gupta, S.M., 1998c, Optimal analysis of lot-size balancing for multiproducts selective disassembly. International Journal of Flexible Automation and Integrated Manufacturing, 6(3-4), 245-269.
405. Veerakamolmal, P. and Gupta, S.M., 1999, Analysis of design efficiency for the disassembly of modular electronic products. Journal of Electronics Manufacturing, 9(1), 79-95.
406. Veerakamolmal, P., Lee, Y.-J., Fasano, J.P., Hale, R., and Jacques, M., 2001, Cost-benefit study of consumer product take back programs using IBM’s WIT reverse logistics optimization tool. Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing II, 13-22.
407. Altekin, F. T., Kandiller, L., and Ozdemirel, N. E., 2003, Disassembly line balancing with limited supply and subassembly availability, Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, 59-70, October 29-30.
408. Brennan, L., Gupta, S.M., and Taleb, K.N., 1994, Operations planning issues in an assem-bly/disassembly environment. International Journal of Operations and Production Management, 14(9), 57-67.
409. Cormen, T., Leiserson, C., Rivest, R. and Stein, C., 2001, Introduction to Algorithms. The MIT Press, Cambridge, MA.
410. Donnan, D.C. and Makan, K., 1983, Disassembly line balancing. MTM Journal of Methods, Time Measurement, 10(2), 20-27.
411. Dorigo, M., Maniezzo, V., and Colorni, A., 1996, The ant system: Optimization by a colony of cooperating agents, IEEE Transactions on Systems, Man, and Cybernetics-Part B, 26(1), 1-13.
412. Elsayed, E.A. and Boucher, T.O., 1994, Analysis and Control of Production Systems. Second Edition, Prentice Hall, Upper Saddle River, NJ.
413. Ghosh, S. and Gagnon, R.J., 1989, A comprehensive literature review and analysis of the design, balancing and scheduling of assembly systems. International Journal of Production Research, 27(4), 637-670.
414. Greenberg, H.J., 2004, Mathematical Programming Glossary. Available on Internet via: Http://www.cudenver.edu/~hgreenbe/glossary/
415. Gungor, A. and Gupta, S.M., 1999a, Disassembly line balancing. Proceedings of the 1999 Annual Meeting of the Northeast Decision Sciences Institute, 193-195.
416. Gungor, A. and Gupta, S.M., 1999b, A Systematic solution approach to the disassembly line balancing problem. Proceedings of the 25th International Conference on Computers and Industrial Engineering, 70-73.
417. Gungor, A. and Gupta, S.M., 2001, A solution approach to the disassembly line balancing problem in the presence of task failures. International Journal of Production Research, 39(7), 1427-1467.
418. Gungor, A. and Gupta, S.M., 2002, Disassembly line in product recovery. International Journal of Production Research, 40(11), 2569-2589.
419. Gupta, S.M. and McGovern, S. M., 2004, Multi-objective optimization in disassembly sequencing problems, Proceedings of the POMS-Cancun Meeting, Cancun, Mexico, (CD-ROM).
420. Hopgood, A.A., 1993, Knowledge-Based Systems for Engineers and Scientists, CRC Press, Boca Raton, FL.
421. Lawler, E.L., Lenstra, J.K., Rinnooy Kan, A.H.G., and Shmoys, D.B. 1985, The Traveling Salesman Problem: A Guided Tour of Combinatorial Optimization, John Wiley and Sons, New York, NY.
422. McGovern, S.M. and Gupta, S.M., 2003a, 2-Opt heuristic for the disassembly line balancing problem. Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, 71-84.
423. McGovern, S.M. and Gupta, S.M., 2003b, Greedy algorithm for disassembly line scheduling. Proceedings of the 2003 IEEE International Conference on Systems, Man, and Cybernetics, October 5-8, Washington, D.C., 1737-1744.
424. Onwubolu, G.C., 2002, Emerging Optimization Techniques in Production Planning and Control, Imperial College Press, London.
425. Silver, E.A., 2004, An overview of heuristic solution methods. Journal of Operational Research Society, 55 (9), 936-956.
426. Tang, Y., Zhou, M., and Caudill, R. 2001, A systematic approach to disassembly line design. Proceedings of the IEEE International Symposium on Electronics and the Environment, Denver, Colorado, May 7-9, 173-178.
427. Tovey, C.A., 2002, Tutorial on computational complexity. Interfaces, 32(3), 30-61.
428. Udomsawat, G., Gupta, S.M., and Al-Turki, Y.A.Y., 2003, Multi-kanban model for disassembly line with demand fluctuation. Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III, Providence, Rhode Island, 85-93, October 29-30.