Polyester nano- and microtechnologies for Tissue Engineering

Handbook of Polyester Drug Delivery Systems

Volumn , Issue , 2016, Pages 595-649

  Shelke, Namdev B ^a   Anderson, Matthew ^a   Idrees, Sana M ^a   Nip, Jonathan ^a   Donde, Sonia ^a   Yu, Xiaojun ^c   Gronowicz, Gloria ^a   Kumbar, Sangamesh G ^a,b  

^a UNIVERSITY OF CONNECTICUT HEALTH CENTER   (United States)

^b UNIVERSITY OF CONNECTICUT   (United States)

^c Stevens Institute of Technology   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BIOCOMPATIBILITY; BIODEGRADABILITY; BIOMECHANICS; BONE; CELL ENGINEERING; LACTIC ACID; MUSCLE; POLYESTERS; TISSUE; TISSUE ENGINEERING;

BONE REGENERATION; DRUG DELIVERY APPLICATIONS; MUSCLE REGENERATION; POLY (EPSILONCAPROLACTONE); POLY (L-LACTIC-CO-GLYCOLIC ACID); POLY L LACTIC ACID; SURFACE FUNCTIONALIZATION; TISSUE ENGINEERING APPLICATIONS;

TISSUE REGENERATION;

EID: 85009678188     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.4032/9789814669665     Document Type: Chapter

References (169)

1. Musculoskeletal Disorders and the Workplace: Low Back and Upper Extremities. (National Academies Press, Washington, DC, 2001), p. 512.
2. Silva-Correia, J., Correia, S. I., Oliveira, J. M., Reis, R. L. (2013). Tissue engineering strategies applied in the regeneration of the human intervertebral disk, Biotech Adv, 31, 1514.
3. Mack, M. (2014). Progress toward tissue-engineered heart valves, J Am Coll Cardiol, 63, 1330.
4. Ohgushi, H., Kotobuki, N., Funaoka, H., Machida, H., Hirose, M., Tanaka, Y., Takakura, Y. (2005). Tissue engineered ceramic artificial joint-ex vivo osteogenic differentiation of patient mesenchymal cells on total ankle joints for treatment of osteoarthritis, Biomaterials, 26, 4654.
5. Blackwood, K. A., Bock, N., Dargaville, T. R., Ann Woodruff, M. (2012). Scaffolds for growth factor delivery as applied to bone tissue engineering, Int J Polym Sci, 2012, 25.
6. Chan, B. P., Leong, K. W. (2008). Scaffolding in tissue engineering: general approaches and tissue-specific considerations, Eur Spine J, 17, 467.
7. Serbo, J. V., Gerecht, S. (2013). Vascular tissue engineering: biodegradable scaffold platforms to promote angiogenesis, Stem Cell Res Ther, 4, 1.
8. Cheng, Y., Ramos, D., Lee, P., Liang, D., Yu, X., Kumbar, S. G. (2014). Collagen functionalized bioactive nanofiber matrices for osteogenic differentiation of mesenchymal stem cells: bone tissue engineering, J Biomed Nanotechnol, 10, 287.
9. Kock, L., van Donkelaar, C. C., Ito, K. (2012). Tissue engineering of functional articular cartilage: the current status, Cell Tissue Res, 347, 613.
10. Lee, P., Tran, K., Chang, W., Shelke, N. B., Kumbar, S. G., Yu, X. (2014). Influence of chondroitin sulfate and hyaluronic acid presence in nanofibers and its alignment on the bone marrow stromal cells: cartilage regeneration, J Biomed Nanotechnol, 10, 1469.
11. Shi, J., Votruba, A. R., Farokhzad, O. C., Langer, R. (2010). Nanotechnology in drug delivery and tissue engineering: from discovery to applications, Nano Lett, 10, 3223.
12. Lee, K., Silva, E. A., Mooney, D. J. (2011). Growth factor delivery-based tissue engineering: general approaches and a review of recent developments, J R Soc Interface, 8, 153.
13. Aravamudhan, A., Ramos, D., Nip, J., Subramanian, A., James, R. D., Harmon, M., Yu, X. G., Kumbar, S. (2013). Osteoinductive small molecules: growth factor alternatives for bone tissue engineering, Curr Pharm Des, 19, 3420.
14. Kumbar, S. G., Nukavarapu, S. P., James, R., Nair, L. S., Laurencin, C. T. (2008). Electrospun poly(lactic acid-co-glycolic acid) scaffolds for skin tissue engineering, Biomaterials, 29, 4100.
15. Guadalupe, E., Ramos, D., Shelke, N. B., James, R., Gibney, C., Kumbar, S. G. (2015). Bioactive polymeric nanofiber matrices for skin regeneration, J Appl Polym Sci, 132, 41879.
16. Place, E. S., George, J. H., Williams, C. K., Stevens, M. M. (2009). Synthetic polymer scaffolds for tissue engineering, Chem Soc Rev, 38, 1139.
17. Armentano, I., Dottori, M., Fortunati, E., Mattioli, S., Kenny, J. M. (2010). Biodegradable polymer matrix nanocomposites for tissue engineering: a review, Polym Degrad Stab, 95, 2126.
18. Dhandayuthapani, B., Yoshida, Y., Maekawa, T., Kumar, D. S. (2011). Polymeric scaffolds in tissue engineering application: a review, Int J Polym Sci, 2011, 1.
19. Bolland, B. J., Kanczler, J. M., Ginty, P. J., Howdle, S. M., Shakesheff, K. M., Dunlop, D. G., Oreffo, R. O. (2008). The application of human bone marrow stromal cells and poly(d,l-lactic acid) as a biological bone graft extender in impaction bone grafting, Biomaterials, 29, 3221.
20. Ghasemi-Mobarakeh, L., Prabhakaran, M. P., Balasubramanian, P., Jin, G., Valipouri, A., Ramakrishna, S. (2013). Advances in electrospun nanofibers for bone and cartilage regeneration, J Nanosci Nanotechnol, 13, 4656.
21. Chen, H., Truckenmuller, R., Blitterswijk, C., Moroni, L. (2013). Fabrication of nanofibrous scaffolds for tissue engineering applications, in Nanomaterials in Tissue Engineering: Fabrication and Applications, Gaharwar, A. K., Sant, S., Hancock, M. J., and Hacking, S. A., eds. (Woodhead Publishing Limited), 158-183.
22. Kumbar, S. G., James, R., Nukavarapu, S. P., Laurencin, C. T. (2008). Electrospun nanofiber scaffolds: engineering soft tissues, Biomed Mater, 3, 034002.
23. Jiang, T., Carbone, E. J., Lo, K. W. H., Laurencin, C. T. (2014). Electrospinning of polymer nanofibers for tissue regeneration, Prog Polym Sci, 46, 1.
24. Bosco, R., Beucken, J. V. D., Leeuwenburgh, S., Jansen, J. (2012). Surface engineering for bone implants: a trend from passive to active surfaces, Coatings, 2, 95.
25. Stevens, M. M., George, J. H. (2005). Exploring and engineering the cell surface interface, Science, 310, 1135.
26. Langer, R. (1993). Polymer-controlled drug delivery systems, Acc Chem Res, 26, 537.
27. Shelke, N. B., Kadam, R., Tyagi, P., Rao, V. R., Kompella, U. B. (2011). Intravitreal poly (l-lactide) microparticles sustain retinal and choroidal delivery of TG-0054, a hydrophilic drug intended for neovascular diseases, Drug Deliv Transl Res, 1, 76.
28. Freed, L. E., Vunjak-Novakovic, G., Biron, R. J., Eagles, D. B., Lesnoy, D. C., Barlow, S. K., Langer, R. (1994). Biodegradable polymer scaffolds for tissue engineering, Nat Biotech, 12, 689.
29. Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., Vacanti, J. P. (1994). Preparation and characterization of poly(llactic acid) foams, Polymer, 35, 1068.
30. Harris, L. D., Kim, B. S., Mooney, D. J. (1998). Open pore biodegradable matrices formed with gas foaming, J Biomed Mater Res, 42, 396.
31. El-Fattah, A. A., Kenawy, E. R., Kandil, S. (2014). Biodegradable polyesters as biomaterials for biomedical applications, Int J Chem Appl Biol Sci, 1, 2.
32. Vortkamp, A., Pathi, S., Peretti, G. M., Caruso, E. M., Zaleske, D. J., Tabin, C. J. (1998). Recapitulation of signals regulating embryonic bone formation during postnatal growth and in fracture repair, Mech Dev, 71, 65.
33. Scotti, C., Piccinini, E., Takizawa, H., Todorov, A., Bourgine, P., Papadimitropoulos, A., Barbero, A., Manz, M. G., Martin, I. (2013). Engineering of a functional bone organ through endochondral ossification, Proc Natl Acad Sci U S A, 110, 3997.
34. Ai-Aql, Z. S., Alagl, A. S., Graves, D. T., Gerstenfeld, L. C., Einhorn, T. A. (2008). Molecular mechanisms controlling bone formation during fracture healing and distraction osteogenesis, J Dent Res, 87, 107.
35. Marsell, R., Einhorn, T. A. (2010). Emerging bone healing therapies, J Orthop Trauma, 24, S4.
36. Holy, C. E., Dang, S. M., Davies, J. E., Shoichet, M. S. (1999). In vitro degradation of a novel poly(lactide-co-glycolide) 75/25 foam, Biomaterials, 20, 1177.
37. Lu, L., Peter, S. J., Lyman, M. D., Lai, H. L., Leite, S. M., Tamada, J. A., Uyama, S., Vacanti, J. P., Langer, R., Mikos, A. G. (2000). In vitro and in vivo degradation of porous poly(dl-lactic-co-glycolic acid) foams, Biomaterials, 21, 1837.
38. Pamula, E., Menaszek, E. (2008). In vitro and in vivo degradation of poly(l-lactide-co-glycolide) films and scaffolds, J Mater Sci Mater Med, 19, 2063.
39. Wu, L., Ding, J. (2005). Effects of porosity and pore size on in vitro degradation of three-dimensional porous poly(d,l-lactide-co-glycolide) scaffolds for tissue engineering, J Biomed Mater Res A, 75, 767.
40. Kinoshita, Y., Maeda, H. (2013). Recent developments of functional scaffolds for craniomaxillofacial bone tissue engineering applications, Sci World J, 2013, 21.
41. Papenburg, B. J., Liu, J., Higuera, G. A., Barradas, A. M., de Boer, J., van Blitterswijk, C. A., Wessling, M., Stamatialis, D. (2009). Development and analysis of multi-layer scaffolds for tissue engineering, Biomaterials, 30, 6228.
42. Coutu, D. L., Yousefi, A. M., Galipeau, J. (2009). Three-dimensional porous scaffolds at the crossroads of tissue engineering and cell-based gene therapy, J Cell Biochem, 108, 537.
43. Lowry, K. J., Hamson, K. R., Bear, L., Peng, Y. B., Calaluce, R., Evans, M. L., Anglen, J. O., Allen, W. C. (1997). Polycaprolactone/glass bioabsorbable implant in a rabbit humerus fracture model, J Biomed Mater Res, 36, 536.
44. Caplan, A. I. (2009). New era of cell-based orthopedic therapies, Tissue Eng Part B, Rev, 15, 195.
45. Whang, K., Tsai, D. C., Nam, E. K., Aitken, M., Sprague, S. M., Patel, P. K., Healy, K. E. (1998). Ectopic bone formation via rhBMP-2 delivery from porous bioabsorbable polymer scaffolds, J Biomed Mater Res, 42, 491.
46. Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., Das, S. (2005). Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering, Biomaterials, 26, 4817.
47. Reguera-Nunez, E., Roca, C., Hardy, E., de la Fuente, M., Csaba, N., Garcia-Fuentes, M. (2014). Implantable controlled release devices for BMP-7 delivery and suppression of glioblastoma initiating cells, Biomaterials, 35, 2859.
48. Yilgor, P., Hasirci, N., Hasirci, V. (2010). Sequential BMP-2/BMP-7 delivery from polyester nanocapsules, J Biomed Mater Res A, 93, 528.
49. Devescovi, V., Leonardi, E., Ciapetti, G., Cenni, E. (2008). Growth factors in bone repair, Chir Organi Mov, 92, 161.
50. Amstutz, H. C. (1995). A tribute to Mr. "BMP": Marshall Urist, Clin Orthop Relat Res, 313, 286.
51. Axelrad, T. W., Einhorn, T. A. (2009). Bone morphogenetic proteins in orthopaedic surgery, Cytokine Growth Factor Rev, 20, 481.
52. Luginbuehl, V., Meinel, L., Merkle, H. P., Gander, B. (2004). Localized delivery of growth factors for bone repair, Eur J Pharm Biopharm, 58, 197.
53. Saito, N., Okada, T., Horiuchi, H., Murakami, N., Takahashi, J., Nawata, M., Ota, H., Nozaki, K., Takaoka, K. (2001). A biodegradable polymer as a cytokine delivery system for inducing bone formation, Nat Biotech, 19, 332.
54. Lo, K. W. H., Ulery, B. D., Ashe, K. M., Laurencin, C. T. (2012). Studies of bone morphogenetic protein based surgical repair, Adv Drug Deliv Rev, 64, 1277.
55. Miyamoto, S., Takaoka, K., Okada, T., Yoshikawa, H., Hashimoto, J., Suzuki, S., Ono, K. (1992). Evaluation of polylactic acid homopolymers as carriers for bone morphogenetic protein, Clin Orthop Relat Res, 278, 274.
56. Fu, Y.-C., Nie, H., Ho, M.-L., Wang, C.-K., Wang, C.-H. (2008). Optimized bone regeneration based on sustained release from three-dimensional fibrous PLGA/HAp composite scaffolds loaded with BMP-2, Biotechnol Bioeng, 99, 996.
57. Wei, G., Jin, Q., Giannobile, W. V., Ma, P. X. (2007). The enhancement of osteogenesis by nano-fibrous scaffolds incorporating rhBMP-7 nanospheres, Biomaterials, 28, 2087.
58. Hsiong, S. X., Mooney, D. J. (2006). Regeneration of vascularized bone, Periodontology 2000, 41, 109.
59. Kaigler, D., Silva, E. A., Mooney, D. J. (2013). Guided bone regeneration using injectable vascular endothelial growth factor delivery gel, J Periodontol, 84, 230.
60. Yoo, H. S., Kim, T. G., Park, T. G. (2009). Surface-functionalized electrospun nanofibers for tissue engineering and drug delivery, Adv Drug Deliv Rev, 61, 1033.
61. Seyednejad, H., Gawlitta, D., Dhert, W. J. A., van Nostrum, C. F., Vermonden, T., Hennink, W. E. (2011). Preparation and characterization of a three-dimensional printed scaffold based on a functionalized polyester for bone tissue engineering applications, Acta Biomater, 7, 1999.
62. Zhan, J., Singh, A., Zhang, Z., Huang, L., Elisseeff, J. H. (2012). Multifunctional aliphatic polyester nanofibers for tissue engineering, Biomatter, 2, 202.
63. Mahjoubi, H., Kinsella, J. M., Murshed, M., Cerruti, M. (2014). Surface modification of poly(d,l-lactic acid) scaffolds for orthopedic applications: a biocompatible, nondestructive route via diazonium chemistry, ACS Appl Mater Interfaces, 6, 9975.
64. Xu, J., Li, S., Hu, F., Zhu, C., Zhang, Y., Zhao, W., Akaike, T., Yang, J. (2014). Artificial biomimicking matrix modifications of nanofibrous scaffolds by hE-cadherin-Fc fusion protein to promote human mesenchymal stem cells adhesion and proliferation, J Nanosci Nanotechnol, 14, 4007.
65. Tang, Y., Zhao, Y., Wang, X., Lin, T. (2014). Layer-by-layer assembly of silica nanoparticles on 3D fibrous scaffolds: Enhancement of osteoblast cell adhesion, proliferation, and differentiation, J Biomed Mater Res A, 102, 3803.
66. Thomas, M., Arora, A., Katti, D. S. (2014). Surface hydrophilicity of PLGA fibers governs in vitro mineralization and osteogenic differentiation, Mater Sci Eng C, 45, 320.
67. Ciardelli, G., Chiono, V., Vozzi, G., Pracella, M., Ahluwalia, A., Barbani, N., Cristallini, C., Giusti, P. (2005). Blends of poly-(e-caprolactone) and polysaccharides in tissue engineering applications, Biomacromolecules, 6, 1961.
68. Shelke, N. B., James, R., Laurencin, C. T., Kumbar, S. G. (2014). Polysaccharide biomaterials for drug delivery and regenerative engineering, Polym Adv Technol, 25, 448.
69. Lin, C.-C., Fu, S.-J., Lin, Y.-C., Yang, I. K., Gu, Y. (2014). Chitosan-coated electrospun PLA fibers for rapid mineralization of calcium phosphate, Int J Biol Macromol, 68, 39.
70. Cui, W., Li, X., Xie, C., Chen, J., Zou, J., Zhou, S., Weng, J. (2010). Controllable growth of hydroxyapatite on electrospun poly(d,llactide) fibers grafted with chitosan as potential tissue engineering scaffolds, Polymer, 51, 2320.
71. Gong, C., Qi, T., Wei, X., Qu, Y., Wu, Q., Luo, F., Qian, Z. (2013). Thermosensitive polymeric hydrogels as drug delivery systems, Curr Med Chem, 20, 79.
72. Stile, R. A., Healy, K. E. (2002). Poly(N-isopropylacrylamide)-based semi-interpenetrating polymer networks for tissue engineering applications. 1. Effects of linear poly(acrylic acid) chains on phase behavior, Biomacromolecules, 3, 591.
73. Kim, S.-S., Sun Park, M., Jeon, O., Yong Choi, C., Kim, B.-S. (2006). Poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds for bone tissue engineering, Biomaterials, 27, 1399.
74. Zhang, X., Chang, W., Lee, P., Wang, Y., Yang, M., Li, J., Kumbar, S. G., Yu, X. (2014). Polymer-ceramic spiral structured scaffolds for bone tissue engineering: effect of hydroxyapatite composition on human fetal osteoblasts, PLoS One, 9, e85871.
75. Nie, L., Suo, J., Zou, P., Feng, S. (2012). Preparation and properties of biphasic calcium phosphate scaffolds multiply coated with HA/PLLA nanocomposites for bone tissue engineering applications, J Nanomater, 2012, 11.
76. Wei, G., Ma, P. X. (2004). Structure and properties of nanohydroxyapatite/polymer composite scaffolds for bone tissue engineering, Biomaterials, 25, 4749.
77. Prabhakaran, M. P., Venugopal, J., Ramakrishna, S. (2009). Electrospun nanostructured scaffolds for bone tissue engineering, Acta Biomater, 5, 2884.
78. Yu, H.-S., Jang, J.-H., Kim, T.-I., Lee, H.-H., Kim, H.-W. (2009). Apatitemineralized polycaprolactone nanofibrous web as a bone tissue regeneration substrate, J Biomed Mater Res A, 88A, 747.
79. Takeoka, Y., Hayashi, M., Sugiyama, N., Yoshizawa-Fujita, M., Aizawa, M., Rikukawa, M. (2015). In situ preparation of poly(l-lactic acid-co-glycolic acid)/hydroxyapatite composites as artificial bone materials, Polym J, 47, 164.
80. Wang, J., Valmikinathan, C. M., Liu, W., Laurencin, C. T., Yu, X. (2010). Spiral-structured, nanofibrous, 3D scaffolds for bone tissue engineering, J Biomed Mater Res A, 93A, 753.
81. Kohane, D. S. (2007). Microparticles and nanoparticles for drug delivery, Biotechnol Bioeng, 96, 203.
82. Borden, M., El-Amin, S. F., Attawia, M., Laurencin, C. T. (2003). Structural and human cellular assessment of a novel microsphere-based tissue engineered scaffold for bone repair, Biomaterials, 24, 597.
83. Kang, K. S., Lee, S.-J., Lee, H., Moon, W., Cho, D.-W. (2011). Effects of combined mechanical stimulation on the proliferation and differentiation of pre-osteoblasts, Exp Mol Med, 43, 367.
84. Mauney, J. R., Sjostorm, S., Blumberg, J., Horan, R., O'Leary, J. P., Vunjak-Novakovic, G., Volloch, V., Kaplan, D. L. (2004). Mechanical stimulation promotes osteogenic differentiation of human bone marrow stromal cells on 3-D partially demineralized bone scaffolds in vitro, Calcif Tissue Int, 74, 458.
85. Liu, X., Jin, X., Ma, P. X. (2011). Nanofibrous hollow microspheres self-assembled from star-shaped polymers as injectable cell carriers for knee repair, Nat Mater, 10, 398.
86. Barnes, C. P., Sell, S. A., Boland, E. D., Simpson, D. G., Bowlin, G. L. (2007). Nanofiber technology: designing the next generation of tissue engineering scaffolds, Adv Drug Deliv Rev, 59, 1413.
87. Chang, K. Y., Hung, L. H., Chu, I., Ko, C. S., Lee, Y. D. (2010). The application of type II collagen and chondroitin sulfate grafted PCL porous scaffold in cartilage tissue engineering, J Biomed Mater Res A, 92, 712.
88. Pittenger, M. F., Mackay, A. M., Beck, S. C., Jaiswal, R. K., Douglas, R., Mosca, J. D., Moorman, M. A., Simonetti, D. W., Craig, S., Marshak, D. R. (1999). Multilineage potential of adult human mesenchymal stem cells, Science, 284, 143.
89. Orth, P., Rey-Rico, A., Venkatesan, J. K., Madry, H., Cucchiarini, M. (2014). Current perspectives in stem cell research for knee cartilage repair, Stem Cells Cloning, 7, 1.
90. Saw, K.-Y., Anz, A., Siew-Yoke Jee, C., Merican, S., Ching-Soong Ng, R., Roohi, S. A., Ragavanaidu, K. (2013). Articular cartilage regeneration with autologous peripheral blood stem cells versus hyaluronic acid: a randomized controlled trial, Arthroscopy, 29, 684.
91. Ye, K., Felimban, R., Moulton, S. E., Wallace, G. G., Bella, C. D., Traianedes, K., Choong, P. F., Myers, D. E. (2013). Bioengineering of articular cartilage: past, present and future, Regen Med, 8, 333.
92. Diekman, B. O., Rowland, C. R., Lennon, D. P., Caplan, A. I., Guilak, F. (2009). Chondrogenesis of adult stem cells from adipose tissue and bone marrow: induction by growth factors and cartilage-derived matrix, Tissue Eng Part A, 16, 523.
93. Zhang, L., Hu, J., Athanasiou, K. A. (2009). The role of tissue engineering in articular cartilage repair and regeneration, Crit Rev Biomed Eng, 37, 1.
94. Itani, Y., Asamura, S., Matsui, M., Tabata, Y., Isogai, N. (2014). Evaluation of nanofiber-based polyglycolic acid scaffolds for improved chondrocyte retention and in vivo bioengineered cartilage regeneration, Plast Reconstr Surg, 133, 805e.
95. Martinez-Diaz, S., Garcia-Giralt, N., Lebourg, M., Gomez-Tejedor, J. A., Vila, G., Caceres, E., Benito, P., Pradas, M. M., Nogues, X., Ribelles, J. L., Monllau, J. C. (2010). In vivo evaluation of 3-dimensional polycaprolactone scaffolds for cartilage repair in rabbits, Am J Sports Med, 38, 509.
96. Christensen, B., Foldager, C., Hansen, O., Kristiansen, A., Le, D., Nielsen, A., Nygaard, J., Bünger, C., Lind, M. (2012). A novel nano-structured porous polycaprolactone scaffold improves hyaline cartilage repair in a rabbit model compared to a collagen type I/III scaffold: in vitro and in vivo studies, Knee Surgery, Sport Traumatol Arthrosc, 20, 1192.
97. Jung, Y., Kim, S. H., You, H. J., Kim, Y. H., Min, B. G. (2008). Application of an elastic biodegradable poly(l-lactide-co-e-caprolactone) scaffold for cartilage tissue regeneration, J Biomater Sci Polym Ed, 19, 1073.
98. Jung, Y., Park, M. S., Lee, J. W., Kim, Y. H., Kim, S. H. (2008). Cartilage regeneration with highly-elastic three-dimensional scaffolds prepared from biodegradable poly(l-lactide-co-e-caprolactone), Biomaterials, 29, 4630.
99. Jung, Y., Kim, S. H., Kim, Y. H. (2010). The effect of hybridization of hydrogels and poly(l-lactide-co-e-caprolactone) scaffolds on cartilage tissue engineering, J Biomater Sci Polym Ed, 21, 581.
100. Xie, J., Han, Z., Naito, M., Maeyama, A., Kim, S. H., Kim, Y. H., Matsuda, T. (2010). Articular cartilage tissue engineering based on a mechano-active scaffold made of poly(l-lactide-co-e-caprolactone): in vivo performance in adult rabbits, J Biomed Mater Res B Appl Biomater, 94, 80.
101. Chu, C. R., Coutts, R. D., Yoshioka, M., Harwood, F. L., Monosov, A. Z., Amiel, D. (1995). Articular cartilage repair using allogeneic perichondrocyte seeded biodegradable porous polylactic acid (PLA): a tissue-engineering study, J Biomed Mater Res, 29, 1147.
102. Neves, S. C., Moreira Teixeira, L. S., Moroni, L., Reis, R. L., Van Blitterswijk, C. A., Alves, N. M., Karperien, M., Mano, J. F. (2011). Chitosan/poly(ε-caprolactone) blend scaffolds for cartilage repair, Biomaterials, 32, 1068.
103. Gloria, A., Causa, F., Russo, T., Battista, E., Della Moglie, R., Zeppetelli, S., De Santis, R., Netti, P. A., Ambrosio, L. (2012). Three-dimensional poly(e-caprolactone) bioactive scaffolds with controlled structural and surface properties, Biomacromolecules, 13, 3510.
104. Hsu, S. H., Chang, S. H., Yen, H. J., Whu, S. W., Tsai, C. L., Chen, D. C. (2006). Evaluation of biodegradable polyesters modified by type II collagen and Arg-Gly-Asp as tissue engineering scaffolding materials for cartilage regeneration, Artif Organs, 30, 42.
105. Nishida, T., Kubota, S., Kojima, S., Kuboki, T., Nakao, K., Kushibiki, T., Tabata, Y., Takigawa, M. (2004). Regeneration of defects in articular cartilage in rat knee joints by CCN2 (connective tissue growth factor), J Bone Miner Res, 19, 1308.
106. Zhu, S., Zhang, B., Man, C., Ma, Y., Liu, X., Hu, J. (2014). Combined effects of connective tissue growth factor-modified bone marrow-derived mesenchymal stem cells and NaOH-treated PLGA scaffolds on the repair of articular cartilage defect in rabbits, Cell Transplant, 23, 715.
107. Dürselen, L., Dauner, M., Hierlemann, H., Planck, H., Claes, L. E., Ignatius, A. (2001). Resorbable polymer fibers for ligament augmentation, J Biomed Mater Res, 58, 666.
108. Kellomäki, M., Niiranen, H., Puumanen, K., Ashammakhi, N., Waris, T., Törmälä, P. (2000). Bioabsorbable scaffolds for guided bone regeneration and generation, Biomaterials, 21, 2495.
109. Papenburg, B. J., Liu, J., Higuera, G. A., Barradas, A., de Boer, J., van Blitterswijk, C. A., Wessling, M., Stamatialis, D. (2009). Development and analysis of multi-layer scaffolds for tissue engineering, Biomaterials, 30, 6228.
110. Vainionpää, S., Rokkanen, P., Törmälä, P. (1989). Surgical applications of biodegradable polymers in human tissues, Prog Polym Sci, 14, 679.
111. Lopes, M. S., Jardini, A. (2012). Poly (lactic acid) production for tissue engineering applications, Procedia Eng, 42, 1402.
112. Bos, R. R., Boering, G., Rozema, F. R., Leenslag, J. W. (1987). Resorbable poly (l-lactide) plates and screws for the fixation of zygomatic fractures, J Oral Maxillofac Surg, 45, 751.
113. Rokkanen, P. U. (1991). Absorbable materials in orthopaedic surgery, Ann Med, 23, 109.
114. Lee, J., Choi, W. I., Tae, G., Kim, Y. H., Kang, S. S., Kim, S. E., Kim, S.-H., Jung, Y., Kim, S. H. (2011). Enhanced regeneration of the ligament-bone interface using a poly(l-lactide-co-ε-caprolactone) scaffold with local delivery of cells/BMP-2 using a heparin-based hydrogel, Acta Biomater, 7, 244.
115. Martin, D. P., Williams, S. F. (2003). Medical applications of poly-4-hydroxybutyrate: a strong flexible absorbable biomaterial, Biochem Eng J, 16, 97.
116. Boland, E. D., Wnek, G. E., Simpson, D. G., Pawlowski, K. J., Bowlin, G. L. (2001). Tailoring tissue engineering scaffolds using electrostatic processing techniques: a study of poly(glycolic acid) electrospinning, J Macromol Sci A, 38, 1231.
117. Chen, G., Ushida, T., Tateishi, T. (2002). Scaffold design for tissue engineering, Macromol Biosci, 2, 67.
118. Ide, A., Sakane, M., Chen, G., Shimojo, H., Ushida, T., Tateishi, T., Wadano, Y., Miyanaga, Y. (2001). Collagen hybridization with poly(l-lactic acid) braid promotes ligament cell migration, Mater Sci Eng C, 17, 95.
119. Chen, L., Bai, Y., Liao, G., Peng, E., Wu, B., Wang, Y., Zeng, X., Xie, X. (2013). Electrospun poly(l-lactide)/poly(ε-caprolactone) blend nanofibrous scaffold: characterization and biocompatibility with human adipose-derived stem cells, PLoS One, 8, e71265.
120. Inanç, B., Arslan, Y. E., Seker, S., Elçin, A. E., Elçin, Y. M. (2009). Periodontal ligament cellular structures engineered with electrospun poly(dl-lactide-co-glycolide) nanofibrous membrane scaffolds, J Biomed Mater Res A, 90A, 186.
121. Inanc, B., Elcin, A. E., Elcin, Y. M. (2006). Osteogenic induction of human periodontal ligament fibroblasts under two- and three-dimensional culture conditions, Tissue Eng, 12, 257.
122. Owen, G. R., Jackson, J. K., Chehroudi, B., Brunette, D. M., Burt, H. M. (2010). An in vitro study of plasticized poly(lactic-co-glycolic acid) films as possible guided tissue regeneration membranes: material properties and drug release kinetics, J Biomed Mater Res A, 95A, 857.
123. Shelke, N. B., Rokhade, A. P., Aminabhavi, T. M. (2010). Preparation and evaluation of novel blend microspheres of poly (lactic-co-glycolic) acid and pluronic F68/127 for controlled release of repaglinide, J Appl Polym Sci, 116, 366.
124. Campos, D. M., Gritsch, K., Salles, V., Attik, G. N., Grosgogeat, B. (2014). Surface entrapment of fibronectin on electrospun PLGA scaffolds for periodontal tissue engineering, BioRes Open Access, 3, 117.
125. Vunjak-Novakovic, G., Altman, G., Horan, R., Kaplan, D. L. (2004). Tissue engineering of ligaments, Annu Rev Biomed Eng, 6, 131.
126. Surrao, D. C., Waldman, S. D., Amsden, B. G. (2012). Biomimetic poly(lactide) based fibrous scaffolds for ligament tissue engineering, Acta Biomater, 8, 3997.
127. Sambit, S., James Goh, C.-H., Toh, S.-L. (2007). Development of hybrid polymer scaffolds for potential applications in ligament and tendon tissue engineering, Biomed Mater, 2, 169.
128. Surrao, D. C., Fan, J. C., Waldman, S. D., Amsden, B. G. (2012). A crimp-like microarchitecture improves tissue production in fibrous ligament scaffolds in response to mechanical stimuli, Acta Biomater, 8, 3704.
129. Sahoo, S., Ouyang, H., Goh, J. C., Tay, T. E., Toh, S. L. (2006). Characterization of a novel polymeric scaffold for potential application in tendon/ligament tissue engineering, Tissue Eng, 12, 91.
130. Lou, J., Tu, Y., Burns, M., Silva, M. J., Manske, P. (2001). BMP-12 gene transfer augmentation of lacerated tendon repair, J Orthop Res, 19, 1199.
131. Chen, C. H., Liu, H. W., Tsai, C. L., Yu, C. M., Lin, I. H., Hsiue, G. H. (2008). Photoencapsulation of bone morphogenetic protein-2 and periosteal progenitor cells improve tendon graft healing in a bone tunnel, Am J Sports Med, 36, 461.
132. Kimura, Y., Hokugo, A., Takamoto, T., Tabata, Y., Kurosawa, H. (2008). Regeneration of anterior cruciate ligament by biodegradable scaffold combined with local controlled release of basic fibroblast growth factor and collagen wrapping, Tissue Eng Part C Methods, 14, 47.
133. Lee, J., Guarino, V., Gloria, A., Ambrosio, L., Tae, G., Kim, Y. H., Jung, Y., Kim, S. H. (2010). Regeneration of Achilles' tendon: the role of dynamic stimulation for enhanced cell proliferation and mechanical properties, J Biomater Sci Polym Ed, 21, 1173.
134. Viinikainen, A. K., Goransson, H., Huovinen, K., Kellomaki, M., Tormala, P., Rokkanen, P. (2009). Bioabsorbable poly-l/d-lactide (PLDLA) 96/4 triple-stranded bound suture in the modified Kessler repair: an ex vivo static and cyclic tensile testing study in a porcine extensor tendon model, J Mater Sci Mater Med, 20, 1963.
135. Savage, R., Risitano, G. (1989). Flexor tendon repair using a "six strand" method of repair and early active mobilisation, J Hand Surg Br, 14, 396.
136. Chainani, A., Hippensteel, K. J., Kishan, A., Garrigues, N. W., Ruch, D. S., Guilak, F., Little, D. (2013). Multilayered electrospun scaffolds for tendon tissue engineering, Tissue Eng Part A, 19, 2594.
137. Taylor, W. (2005). Musculoskeletal pain in the adult New Zealand population: prevalence and impact, N Z Med J, 118, U1629.
138. Lewis, J. S. (2009). Rotator cuff tendinopathy, Br J Sports Med, 43, 236.
139. Inui, A., Kokubu, T., Mifune, Y., Sakata, R., Nishimoto, H., Nishida, K., Akisue, T., Kuroda, R., Satake, M., Kaneko, H., Fujioka, H. (2012). Regeneration of rotator cuff tear using electrospun poly(d,l-lactide-co-glycolide) scaffolds in a rabbit model, Arthroscopy, 28, 1790.
140. Inui, A., Kokubu, T., Fujioka, H., Nagura, I., Sakata, R., Nishimoto, H., Kotera, M., Nishino, T., Kurosaka, M. (2011). Application of layered poly (l-lactic acid) cell free scaffold in a rabbit rotator cuff defect model, Sports Med Arthrosc Rehabil Ther Technol, 3, 1758.
141. Barber, J. G., Handorf, A. M., Allee, T. J., Li, W. J. (2013). Braided nanofibrous scaffold for tendon and ligament tissue engineering, Tissue Eng Part A, 19, 1265.
142. Manning, C. N., Schwartz, A. G., Liu, W., Xie, J., Havlioglu, N., Sakiyama-Elbert, S. E., Silva, M. J., Xia, Y., Gelberman, R. H., Thomopoulos, S. (2013). Controlled delivery of mesenchymal stem cells and growth factors using a nanofiber scaffold for tendon repair, Acta Biomater, 9, 6905.
143. Viinikainen, A., Goransson, H., Taskinen, H. S., Roytta, M., Kellomaki, M., Tormala, P., Rokkanen, P. (2014). Flexor tendon healing within the tendon sheath using bioabsorbable poly-l/d-lactide 96/4 suture. A histological in vivo study with rabbits, J Mater Sci Mater Med, 25, 1319.
144. Wang, S., Cai, L. (2010). Polymers for fabricating nerve conduits, Int J Polym Sci, 2010, 20.
145. Yucel, D., Kose, G. T., Hasirci, V. (2010). Polyester based nerve guidance conduit design, Biomaterials, 31, 1596.
146. Borkenhagen, M., Stoll, R. C., Neuenschwander, P., Suter, U. W., Aebischer, P. (1998). In vivo performance of a new biodegradable polyester urethane system used as a nerve guidance channel, Biomaterials, 19, 2155.
147. Vleggeert-Lankamp, C. L. A. M., De Ruiter, G. C. W., Wolfs, J. F. C., Pêgo, A. P., Van Den Berg, R. J., Feirabend, H. K. P., Malessy, M. J. A., Lakke, E. A. J. F. (2007). Pores in synthetic nerve conduits are beneficial to regeneration, J Biomed Mater Res A, 80, 965.
148. Wang, H. B., Mullins, M. E., Cregg, J. M., Hurtado, A., Oudega, M., Trombley, M. T., Gilbert, R. J. (2009). Creation of highly aligned electrospun polyl-lactic acid fibers for nerve regeneration applications, J Neural Eng, 6, 1741.
149. Wang, H. B., Mullins, M. E., Cregg, J. M., McCarthy, C. W., Gilbert, R. J. (2010). Varying the diameter of aligned electrospun fibers alters neurite outgrowth and Schwann cell migration, Acta Biomater, 6, 2970.
150. Kang, K. N., Kim, D. Y., Yoon, S. M., Lee, J. Y., Lee, B. N., Kwon, J. S., Seo, H. W., Lee, I. W., Shin, H. C., Kim, Y. M., Kim, H. S., Kim, J. H., Min, B. H., Lee, H. B., Kim, M. S. (2012). Tissue engineered regeneration of completely transected spinal cord using human mesenchymal stem cells, Biomaterials, 33, 4828.
151. Madduri, S., Gander, B. (2012). Growth factor delivery systems and repair strategies for damaged peripheral nerves, J Control Release, 161, 274.
152. Sun, W., Sun, C., Lin, H., Zhao, H., Wang, J., Ma, H., Chen, B., Xiao, Z., Dai, J. (2009). The effect of collagen-binding NGF-beta on the promotion of sciatic nerve regeneration in a rat sciatic nerve crush injury model, Biomaterials, 30, 4649.
153. Sun, W., Sun, C., Zhao, H., Lin, H., Han, Q., Wang, J., Ma, H., Chen, B., Xiao, Z., Dai, J. (2009). Improvement of sciatic nerve regeneration using laminin-binding human NGF-β, PLoS One, 4, e6180.
154. Wood, M. D., Gordon, T., Kim, H., Szynkaruk, M., Phua, P., Lafontaine, C., Kemp, S. W., Shoichet, M. S., Borschel, G. H. (2013). Fibrin gels containing GDNF microspheres increase axonal regeneration after delayed peripheral nerve repair, Regen Med, 8, 27.
155. Kokai, L. E., Ghaznavi, A. M., Marra, K. G. (2010). Incorporation of double-walled microspheres into polymer nerve guides for the sustained delivery of glial cell line-derived neurotrophic factor, Biomaterials, 31, 2313.
156. Kokai, L. E., Bourbeau, D., Weber, D., McAtee, J., Marra, K. G. (2011). Sustained growth factor delivery promotes axonal regeneration in long gap peripheral nerve repair, Tissue Eng Part A, 17, 1263.
157. Liu, J. J., Wang, C. Y., Wang, J. G., Ruan, H. J., Fan, C. Y. (2011). Peripheral nerve regeneration using composite poly(lactic acid-caprolactone)/ nerve growth factor conduits prepared by coaxial electrospinning, J Biomed Mater Res A, 96, 13.
158. Longo, U. G., Loppini, M., Berton, A., Spiezia, F., Maffulli, N., Denaro, V. (2012). Tissue engineered strategies for skeletal muscle injury, Stem Cells Int, 2012, 175038.
159. Levenberg, S., Rouwkema, J., Macdonald, M., Garfein, E. S., Kohane, D. S., Darland, D. C., Marini, R., van Blitterswijk, C. A., Mulligan, R. C., D'Amore, P. A., Langer, R. (2005). Engineering vascularized skeletal muscle tissue, Nat Biotech, 23, 879.
160. Kaully, T., Kaufman-Francis, K., Lesman, A., Levenberg, S. (2009). Vascularization--the conduit to viable engineered tissues, Tissue Eng Part B, 15, 159.
161. Keun Kwon, I., Kidoaki, S., Matsuda, T. (2005). Electrospun nano- to microfiber fabrics made of biodegradable copolyesters: structural characteristics, mechanical properties and cell adhesion potential, Biomaterials, 26, 3929.
162. Sankaran, K. K., Krishnan, U. M., Sethuraman, S. (2014). Axially aligned 3D nanofibrous grafts of PLA-PCL for small diameter cardiovascular applications, J Biomater Sci Polym Ed, 25, 1791.
163. Kouya, T., Tada, S.-I., Minbu, H., Nakajima, Y., Horimizu, M., Kawase, T., Lloyd, D. R., Tanaka, T. (2013). Microporous membranes of PLLA/PCL blends for periosteal tissue scaffold, Mater Lett, 95, 103.
164. Tanaka, T., Eguchi, S., Saitoh, H., Taniguchi, M., Lloyd, D. R. (2008). Microporous foams of polymer blends of poly(l-lactic acid) and poly(ε-caprolactone), Desalination, 234, 175.
165. Molladavoodi, S., Gorbet, M., Medley, J., Ju Kwon, H. (2013). Investigation of microstructure, mechanical properties and cellular viability of poly(l-lactic acid) tissue engineering scaffolds prepared by different thermally induced phase separation protocols, J Mech Behav Biomed Mater, 17, 186.
166. Causa, F., Battista, E., Della Moglie, R., Guarnieri, D., Iannone, M., Netti, P. A. (2010). Surface investigation on biomimetic materials to control cell adhesion: the case of RGD conjugation on PCL, Langmuir, 26, 9875.
167. Pham, Q. P., Sharma, U., Mikos, A. G. (2006). Electrospun poly(e-caprolactone) microfiber and multilayer nanofiber/microfiber scaffolds: characterization of scaffolds and measurement of cellular infiltration, Biomacromolecules, 7, 2796.
168. Fisher, M. B., Henning, E. A., Söegaard, N., Esterhai, J. L., Mauck, R. L. (2013). Organized nanofibrous scaffolds that mimic the macroscopic and microscopic architecture of the knee meniscus, Acta Biomater, 9, 4496.
169. Baker, B. M., Mauck, R. L. (2007). The effect of nanofiber alignment on the maturation of engineered meniscus constructs, Biomaterials, 28, 1967.