Contact angles and wettability of cellulosic surfaces: A review of proposed mechanisms and test strategies

BioResources

Volumn 10, Issue 4, 2015, Pages 8657-8749

  Hubbe, Martin A ^a   Gardner, Douglas J ^b   Shen, Wei ^c  

^a NORTH CAROLINA STATE UNIVERSITY   (United States)

^b UNIVERSITY OF MAINE   (United States)

^c MONASH UNIVERSITY   (Australia)

Author keywords

Cellulose; Contact angles; Surface free energy; Water repellent treatments; Wood

Indexed keywords

ADHESION; CELLULOSE; DISPERSIONS; FREE ENERGY; HYDROGEN BONDS; WETTING; WOOD; CONTACT ANGLE;

ADVANCING AND RECEDING CONTACT ANGLES; CONCEPTUAL APPROACHES; CONTACT ANGLE METHOD; FRICTIONAL PROPERTIES; SURFACE FREE ENERGY; THEORETICAL APPROACH; THERMODYNAMIC WORK OF ADHESION; WATER REPELLENT TREATMENT; ADHESION PROPERTIES; CELLULOSIC MATERIAL; COATING PROPERTIES; PROBE LIQUID; SURFACE-FREE ENERGY; TEST STRATEGIES;

CONTACT ANGLE; WETTING;

ADHESION; CELLULOSE; COATING; CONTACT ANGLE; THERMAL PROPERTIES; WETTABILITY; ANGLES; FREE ENERGY; HYDROGEN BONDS; SURFACES; WETTING;

EID: 84983605935     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.10.4.Hubbe_Gardner_Shen     Document Type: Review

References (420)

1. Adam, N. K., and Jessop, G. (1925). "Angles of contact and polarity of solid surfaces, "J. Chem. Soc. London 127, 1863-1868. DOI: 10.1039/CT9252701863.
2. Adamson, A. W., and Gast, A. P. (1997). Physical Chemistry of Surfaces, 6th Ed., Wiley, New York.
3. Alam, A., Manuilskiy, A., Thim, J., O'Nils, M., Lindgren, J., and Lidén, J. (2012). "Online surface roughness characterization of paper and paperboard using a line of light triangulation technique, "Nordic Pulp Paper Res. J. 27(3), 662-670. DOI: 10.3183/NPPRJ-2012-27-03-p662-670.
4. Alava, M., and Niskanen, K. (2006). "The physics of paper, "Reports on Progress in Physics 69(3), 669-723. DOI: 10.1088/0034-4885/69/3/R03.
5. Albahri, T. A., and Alashwak, D. A. (2013). "Modeling of pure compounds surface tension using QSPR, "Fluid Phase Equilibria 355, 87-91. DOI: 10.1016/j.fluid.2013.06.052.
6. Alince, B. (2002). "Porosity of swollen pulp fibers revisited, "Nordic Pulp Paper Res. J. 17(1), 71-73. DOI: 10.3183/NPPRJ-2002-17-01-p071-073.
7. Alince, B., and van de Ven, T. G. M. (1997). "Porosity of swollen pulp fibers evaluated by polymer adsorption, "in: The Fundamentals of Papermaking Materials, Transactions of 11th Fundamental Research Symp. held at Cambridge, Sept. 1997, Baker, C. F. (ed.), Pira Intl., Leatherhead, Surrey, UK, 771-788.
8. Allan, G. G., Ko, Y. C., and Ritzenthaler, P. (1991). "The microporosity of pulp-The nature of the pore-size distribution, "TAPPI J. 74(3), 205-212.
9. Anderson, B. E., Gortner, R, A., and Schmitz, H. (1941). "Factors affecting the decreasing rate of flow of liquids through wood, "Tech. Bull. Minnesota Agric. Exp. Sta. 146, 1-70.
10. Aqra, F., and Ayyad, A. (2011). "Theoretical calculations of the surface tension of liquid transition metals, "Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science 42(1), 5-8. DOI: 10.1007/s11663-010-9456-3.
11. Aranberri-Askargorta, I., Lampke, T., and Bismarck, A. (2003). "Wetting behavior of flax fibers as reinforcement for polypropylene, "J. Colloid Interface Sci. 263(2), 580-589. DOI: 10.1016/S0021-9797(03)00294-7.
12. Aspler, J. S., Davis, S., and Lyne, M. B. (1984). "The dynamic wettability of paper. Part 1: The effect of surfactants, alum, and pH on self-sizing, "Tappi J. 67(9), 128-131.
13. Aspler, J. S., Davis, S., and Lyne, M. B. (1987). "The surface chemistry of paper in relation to dynamic wetting and sorption of water and lithographic fountain solution, "J. Pulp Paper Sci. 13(2), J55-J60.
14. Aspler, J. S., and Lyne, M. B. (1984). "The dynamic wettability of paper. Part II. Influence of surfactants type on improvement wettability of newsprint, "Tappi J. 67(10), 96-99.
15. Auroux, A. (2008). "Acidity and basicity: Determination by adsorption microcalorimetry, "in: Acidity and Basicity, Auroux, A., Brait, A., Brunner, E., Fajula, F., Garrone, E., Jentys, A., Lercher, J. A., and Pfeifer, H. (eds.), Book Series: Molecular Sieves Science and Technology 6, 45-152. DOI: 10.1007/3829_008.
16. Ayrilmis, N. (2011). "Effect of fire retardants on surface roughness and wettability of wood plastic composite panels, "BioResources 6(3), 3178-3187.
17. Back, E. L. (1991). "Oxidative activation of wood surfaces for glue bonding, "For. Prod. J. 41(2), 30-36.
18. Baldan, A. (2012). "Adhesion phenomena in bonded joints, "Intl. J. Adhes. Adhes. 38, 95-116. DOI: 10.1016/j.ijadhadh.2012.04.007.
19. Banerjee, S., and Etzler, F. M. (1995). "An algorithm for estimating contact angles, "Langmuir 11(10), 4141-4142. DOI: 10.1021/la00010a081.
20. Baptista, D., Muszynski, L., Gardner, D. J., and Atzema, E. (2012). "An experimental method for three-dimensional dynamic contact angle analysis, "Journal of Adhesion Science and Technology 26, 2199-2215. DOI: 10.1163/156856111x610135.
21. Bayer, R., Mallon, U., and Blechschmidt, J. (1996). "Penetration of paper-Past and present measurement, "Das Papier 50(9), 494-500.
22. Belu, A. M., Graham, D. J., and Castner, D. G. (2003). "Time-of-flight secondary ion mass spectrometry: Techniques and applications for the characterization of biomaterial surfaces, "Biomaterials 24(21), 3635-3653. DOI: 10.1016/S0142-9612(03)00159-5.
23. Berezkin, V. G. (1996). "Physicochemical fundamentals of the chromatographic retention in capillary gas-liquid chromatography, "J. Anal. Chem. 51(2), 136-142.
24. Berg, J. C. (1993). "The importance of acid-base interactions in wetting, coating, adhesion and related phenomena, "Nordic Pulp Paper Res. J. 8(1), 75-85. DOI: 10.3183/NPPRJ-1993-08-01-p075-085.
25. Bergstrom, L., Stemme, S., Dahlfors, T., Arwin, H., and Ödberg, L. (1999). "Spectroscopic ellipsometry characterisation and estimation of the Hamaker constant of cellulose, "Cellulose 6(1), 1-13. DOI: 10.1023/A:1009250111253.
26. Berthold, J., and Salmén, L. (1997). "Effect of mechanical and chemical treatments on the pore-size distribution in wood pulps examined by inverse size-exclusion chromatography, "J. Pulp Paper Sci. 23(6), J245-J253.
27. Bhat, N. V., Netravali, A. N., Gore, A. V., Sathianarayanan, M. P., Arolkar, G., and Deshmukh, R. R. (2011). "Surface modification of cotton fabrics using plasma technology, "Textile Res. J. 81(10), 1014-1026. DOI: 10.1177/0040517510397574.
28. Biermann, O., Hädicke, E., Koltzenburg, S., and Müller-Plathe, F. (2001). "Hydrophilicity and lipophilicity of cellulose crystal surfaces, "Angew. Chemie-Intl. Ed. 40(20), 3822-3825. DOI: 10.1002/1521-3773(20011015)40:20<3822::AIDANIE3822>3.0.CO;2-V
29. Bikerman, J. J., and Whitney, W. (1963). "Superficial imbibition by paper, "Tappi 46(11), 689-691.
30. Bismarck, A., Aranberri-Askargorta, I., Springer, J., Lampke, T., Wielage, B., Stamboulis, A., Shenderovich, I., and Limbach, H. H. (2002). "Surface characterization of flax, hemp, and cellulose fibers: Surface properties and the water uptake behavior, "Polym. Compos. 23(5), 872-894. DOI: 10.1002/pc.10485.
31. Bodig, J. (1962). "Wettability related to gluabilities of fiber Philippine mahoganies, "Forest Prod. J. 12(6), 265-270.
32. Bonsen, K. J. M. (1991), "Vessel occlusions in hardwoods, "Vierteljahrsschrift der Naturforschenden Gesellschaft in Zuerich 136(1), 13-50.
33. Bonzel, H. P. (2001). "Surface morphologies: Transient and equilibrium shapes, "Interface Sci. 9, 21-34. DOI: 10.1023/A:1011210627335.
34. Borch, J. (1991). "Thermodynamics of polymer-paper adhesion-A review, "J. Adhes. Sci. Technol. 5(7), 523-541. DOI: 10.1163/156856191X00729.
35. Bowen, W. R., and Jenner, F. (1995). "The calculation of dispersion forces for engineering applications, "Adv. Colloid Interface Sci. 56, 201-243. DOI: 10.1016/0001-8686(94)00233-3.
36. Bristow, J. A. (1967). "Liquid absorption into paper during short time intervals, "Svensk Papperstidning 70(19), 623-629.
37. Bristow, J. A. (1986). "The paper surface in relation to the network, "in: Paper Structure and Properties, Bristow, J. A., and Kolseth, P. (eds.), No. 8 in bood series: International Fiber Science and Technology, Dekker, New York, Ch. 8, pp. 169-201.
38. Brugnara, M., Della Volpe, C., Maniglio, D., Siboni, S., Negri, M., and Gaeti, N. (2006). "Wettability of porous materials, I: The use of Wilhelmy experiment: The cases of stone, wood and non-woven fabric, "In: Mittal, K. L. (ed.), Contact Angle, Wettability and Adhesion, Vol. 4, pp. 115-141.
39. Bryne, L. E., and Wålinder, M. E. P. (2010). "Ageing of modified wood. Part 1: Wetting properties of acetylated, furfurylated, and thermally modified wood, "Holzforschung 64(3), 295-304. DOI: 10.1515/HF.2010.040.
40. Buchert, J., Pere, J., Johansson, L. S., and Campbell, J. M. (2001). "Analysis of the surface chemistry of linen and cotton fabrics, "Textile Res. J. 71(7), 626-629. DOI: 10.1177/004051750107100710.
41. Calvert, P. (2001). "Inkjet printing for materials and devices, "Chem. Mater. 13(10), 3299-3305. DOI: 10.1021/cm0101632.
42. Cantero, G., Arbelaiz, A., Llano-Ponte, R., and Mondragon, I. (2003). "Effects of fibre treatment on wettability and mechanical behavior of flax/polypropylene composites, "Compos. Sci. Technol. 63, 1247-1254. DOI: 10.1016/S0266-3538(03)00094-0.
43. Carpenter, M. W. (1999). "Characterizing the chemistry of yellow-poplar surfaces exposed to different surface energy environments using DCA, DSC, and XPS, "Masters Thesis, West Virginia University, Morgantown, WV. 181 pp.
44. Casilla, R. C., Chow, S., and Steiner, P. R. (1981). "An immersion technique for studying wood wettability, "Wood Sci. Technol. 15(1), 31-43. DOI: 10.1007/BF00366499.
45. Cassie, A. B. D., and Baxter, S. (1944). "Wettability of porous surfaces, "Trans. Faraday Soc. 40, 546-551. DOI: 10.1039/tf9444000546.
46. Cassie, A. B. D., and Baxter, S. (1945). "Large contact angles of plant and animal surfaces, "Nature 155(3923), 21-22. DOI: 10.1038/155021a0.
47. Cerne, L., Simoncic, B., and Zeljko, M. (2008). "The influence of repellent coatings on surface free energy of glass plate and cotton fabric, "Appl. Surface Sci. 254(20), 6467-6477. DOI: 10.1016/j.apsusc.2008.04.007.
48. Chattopadhyay, R. (2010). "Introduction: Types of technical textile yarn, "in: Technical Textile Yarns-Industrial and Medical Applications, Alagirusamy, R., and Das, A. (eds.), Woodhead Publ., Cambridge, UK, Ch. 1, pp. 3-55. DOI: 10.1533/9781845699475.1.3.
49. Chen, C.-M. (1970). "Effect of extractive removal on adhesion and wettability of some tropical woods, "For. Prod. J. 20(1), 36-41.
50. Chen, F., and Chang, W. V. (1991). "Applicability study of a new acid-base interaction model in polypeptides and polyamides, "Langmuir 7(10), 2401-2404. DOI: 10.1021/la00058a071.
51. Chen, M., and Biermann, C. J. (1995). "Sizing-Investigation of the mechanism of paper sizing through a desizing approach, "TAPPI J. 78(8), 120-126.
52. Cheng, E. Z., and Sun, X. (2006). "Effects of wood-surface roughness, adhesive viscosity and processing pressure on adhesion strength of protein adhesive, "J. Adhes. Sci. Technol. 20(9), 997-1017. DOI: 10.1163/156856106777657779.
53. Chibowski, E. (2003). "Surface free energy of a solid from contact angle hysteresis, "Adv. Colloid Interface Sci. 103(2), 149-172. DOI: 10.1016/S0001-8686(02)00093-3.
54. Choi, H.-M., and Cloud, R. M. (1992). "Natural sorbents in oil spill cleanup, "Environ. Sci. Technol. 26(4), 772-776. DOI: 10.1021/es00028a016.
55. Chowdhury, Z. Z., Abd Hamid, S. B., Das, R., Hasan, M. R., Zain, S. M., Khalid, K., and Uddin, M. N. (2013). "Preparation of carbonaceous adsorbents from lignocellulosic biomass and their use in removal of contaminants from aqueous solution, "BioResources 8(4), 6523-6555. DOI: 10.15376/biores.8.4.6523-6555.
56. Collett, B. M. (1972). "A review of surface and interfacial adhesion in wood science and related fields, "Wood Sci. Technol. 6(1), 1-42. DOI: 10.1007/BF00351806.
57. Colom, X., and Carrillo, F. (2002). "Crystallinity changes in lyocell and viscose-type fibres by caustic treatment, "Eur. Polymer J. 38(11), 2225-2230. DOI: 10.1016/S0014-3057(02)00132-5.
58. Corte, H. (1982). "Porosity of paper, "in: Handbook of Paper Science, Vol. 2, Rance, H. F. (ed.), Chapter 6, pp. 1-70.
59. Dankovich, T. A., and Gray, D. G. (2011). "Contact angle measurements on smooth nanocrystalline cellulose (I) thin films, "J. Adhes. Sci. Technol. 25(6-7), 699-708. DOI: 10.1163/016942410X525885.
60. Debye, P. (1920). "Die Van der Waalsschen Kohäsionkräfte, "Phys. Z. 21, 178-187.
61. Decker, E. L., Frank, B., Suo, Y., and Garoff, S. (1999). "Physics of contact angle measurement, "Colloids Surf. A 156, 177-189. DOI: 10.1016/S0927-7757(99)00069-2.
62. de Gennes, P. G. (1985). "Wetting: Statics and dynamics, "Rev. Mod. Phys. 57, 827-863. DOI: 10.1103/RevModPhys.57.827.
63. Della Volpe, C., Maniglio, D., Brugnara, M., Siboni, S., and Morra, M. (2004). "The solid surface free energy calculation. I. In defense of the multicomponent approach, "J. Colloid Interface Sci. 271(2), 434-453. DOI: 10.1016/j.jcis.2003.09.049.
64. Della Volpe, C., Maniglio, D., Morra, M., and Siboni, S. (2002). "The determination of a 'stable-equilibrium' contact angle on heterogeneous and rough surfaces, "Colloids Surf. A 206, 47-67. DOI: 10.1016/S0927-7757(02)00072-9.
65. Della Volpe, C., Maniglio, D., Siboni, S., and Morra, M. (2006). "Une méthode expérimentale pour mesurer l'angle de contact d'équilibre avec la technique de Wilhelmy, "("An experimental procedure to obtain the equilibrium contact angle from the Wilhelmy method, ") Oil Gas Sci. Technol. 56(1), 9-22. DOI: 10.2516/ogst:2001002.
66. Della Volpe, C., and Siboni, S. (1997). "Some reflections on acid-base solid surface free energy theories, "J. Colloid Interface Sci. 195, 121-136. DOI: 10.1006/jcis.1997.5124.
67. de Meijer, M., Haemers, S., Cobben, W., and Militz, H. (2000). "Surface energy determinations of wood: Comparison of methods and wood species, "Langmuir 16, 9352-9359. DOI: 10.1021/la001080n
68. Deshmukh, R. R., and Bhat, N. V. (2003). "The mechanism of adhesion and printability of plasma processed PET films, "Mater. Res. Inovat. 7(5), 283-290. DOI: 10.1007/s10019-003-0265-z
69. Dodd, A. P., Kadla, J. F., and Straus, S. K. (2014). "Characterization of fractions obtained from two industrial kraft lignins, "ACS Sustainable Chem. Eng. 3, 103-110. 10.1021/sc500601b
70. Dorris, G. M., and Gray, D. G. (1979). "Adsorption, spreading pressure, and London force interactions of hydrocarbons on cellulose and wood fiber surfaces, "J. Colloid Interface Sci. 71(1), 93-106. DOI: 10.1016/0021-9797(79)90224-8.
71. Dorris, G. M., and Gray, D. G. (1980). "Adsorption of n-alkanes at zero surface coverage on cellulose paper and wood fibers, "J. Colloid Interface Sci. 77(2), 353-362. DOI: 10.1016/0021-9797(80)90304-5.
72. Dourado, F., Gama, F. M., Chibowski, E., and Mota, M. (1998). "Characterization of cellulose surface free energy, "J. Adhes. Sci. Technol. 12(10), 1081-1090. DOI: 10.1163/156856198X00740.
73. Drago, R. S., Parr, L. B., and Chamberlain, C. S. (1977). "Solvent effects and their relationships to the E and C equation, "J. Amer. Chem. Soc. 99(10), 3203-3209. DOI: 10.1021/ja00452a001.
74. Drago, R. S., Vogel, G. C., and Needham, T. E. (1971). "A four-parameter equation for predicting enthalpies of adduct formation, "J. Amer. Chem. Soc. 93(23), 6014-6026. DOI: 10.1021/ja00752a010.
75. Drago, R. S., and Wayland, B. B. (1965). "A double-scale equation for correlating enthalpies of Lewis acid-base interactions, "J. Amer. Chem. Soc. 87, 3571-3577. DOI: 10.1021/ja01094a008.
76. Drago, R. S., Wong, N., Bilgrien, C., and Vogel, G. C. (1987). "E-parameters and Cparameters from Hammett substituents constants and use of E and C to understand cobalt carbon bond energies, "Inorg. Chem. 26, 9-14. DOI: 10.1021/ic00248a003.
77. Driemeier, C., and Bragatto, J. (2013). "Crystallite width determines monolayer hydration across a wide spectrum of celluloses isolated from plants, "J. Phys. Chem. B 117(1), 415-421. DOI: 10.1021/jp309948h
78. Dufresne, A. (2012). "Potential of nanocellulose as a reinforcing phase for polymers, "JFOR-J. Sci. Technol. Forest Prod. Proc. 2(6), 6-16.
79. Dunisch, O. (2013). "Relationship between the anatomical structure and the swelling of conditioned wood surfaces, "IAWA J. 34(2), 197-208. DOI: 10.1163/22941932-00000017.
80. Dupré, A. (1869). "Théorie mécanique de la chaleur, "Gautheir-Villars, Paris, 2883.
81. Edgar, C. D., and Gray, D. G. (2003). "Smooth model cellulose I surfaces from nanocrystal suspensions, "Cellulose 10(4), 299-306. DOI: 10.1023/A:1027333928715.
82. Eggebrecht, J., Gubbins, K. E., and Thompson, S. M. (1987a). "The liquid vapor interface of simple polar fluids. 1. Integral-equation and perturbation theories, "J. Chem. Phys. 86, 2286-2298. DOI: 10.1063/1.452127.
83. Eggebrecht, J., Thompson, S. M., and Gubbins, K. E. (1987b). "The liquid-vapor interface of simple polar fluids. 2. Computer simulation, "J. Chem. Phys. 86, 2299-2308. DOI: 10.1063/1.452128.
84. Eichhorn, S. J. (2011). "Cellulose nanowhiskers: Promising materials for advanced applications, "Soft Matter 7, 303-315. DOI: 10.1039/C0SM00142B
85. Eick, J. D., Good, R. J., and Neumann, A. W. (1975). "Thermodynamics of contact angles. 2. Rough solid surfaces, "J. Colloid Interface Sci. 53(2), 235-248. DOI: 10.1016/0021-9797(75)90010-7.
86. Elazzouzi-Hafraoui, S., Nishiyama, Y., Putaux, J. L., Heux, L., Dubreuil, F., and Rochas, C. (2008). "The shape and size distribution of crystalline nanoparticles prepared by acid hydrolysis of native cellulose, "Biomacromolecules 9, 57-65. DOI: 10.1021/bm700769p
87. Englund, F., Bryne, L. E., Ernstsson, M., Lausmaa, J., and Wålinder, M. (2009). "Spectroscopic studies of surface chemical composition and wettability of modified wood, "Wood Mater. Sci. Eng. 4, 80-85. DOI: 10.1080/17480270903337659.
88. Erbil, H. Y. (1997). "Calculation of spreading pressure of water on cellulosic films from contact angle data, "Turkish J. Chem. 21(4), 332-345.
89. Eriksen, Ø., Johannesen, E., and Gregersen, Ø. W. (2007). "The influence of paper surface roughness on ink pigment distribution, "APPITA J. 60(5), 384-389.
90. Etzler, F. M. (2013). "Determination of the surface free energy of solids: A critical review, "Rev. Adhesion Adhesives 1, 3-45. DOI: 10.7569/RAA.2013.097301.
91. Etzler, F. M., Buche, M., Bobalek, J. F., and Weiss, M. A. (1995). "Surface free energy of paper and inks-Printability issues, "Proc. TAPPI 1995 Papermakers Conf., Chicago, TAPPI Press, Altanta.
92. Fabretto, M., Sedev, R., and Ralson, J. (2003). "Advancing, receding and vibrated contact angles on rough hydrophilic surfaces, "in: Contact Angle, Wettability and Adhesion, Mittal, K. L. (ed.), VSP, Utrecht, Boston, Vol. 3, pp. 161-173.
93. Fan, Y. M., Mei, C. Q., Liu, Y., and Mei, L. (2013). "Effect of surface free energy and wood-flour and its polar component on the mechanical and physical properties of wood-thermoplastic composites, "Revs. Advan. Mater. Sci. 33(3), 211-218.
94. Fang, C. H., Mariotti, N., Cloutier, A., Koubaa, A., and Blanchet, P. (2012). "Densification of wood veneers by compression combined with heat and steam, "Eur. J. Wood Wood Prod. 70, 155-163. DOI: 10.1007/s00107-011-0524-4.
95. Felix, J. M., and Gatenholm, P. (1993). "Characterization of cellulose fibers using inverse gas chromatography, "Nordic Pulp Paper Res. J. 8(1), 200-203. DOI: 10.3183/NPPRJ-1993-08-01-p200-203.
96. Fischer, K. (1999). "The effect of surface sizing additives on inkjet printing, "Wochenbl. Papierfabrik. 127(11-12), 765.
97. Flynn, K. A. (1995). "A review of the permeability, fluid-flow, and anatomy of spruce (Picea spp.), "Wood Fiber Sci. 27(3), 278-284.
98. Fortes, M. A. (1981). "Wettability of polymer surfaces, "in: Physicochemical Aspects of Polymer Surfaces, Mittal, K. L. (ed.), Plenum, New York, 107-139.
99. Fowkes, F. M. (1964a). "Attractive forces at interfaces, "Ind. Eng. Chem. 56, 40-52. DOI: 10.1021/ie50660a008.
100. Fowkes, F. M. (1964b). Contact Angle, Wettability and Adhesion, American Chemical Society, Washington, DC. DOI: 10.1021/ba-1964-0043.
101. Fowkes, F. M. (1965). Chemistry and Physics at Interfaces, Amer. Chem. Soc., Washington, DC.
102. Fowkes, F. M. (1972). "Donor-acceptor interactions at interfaces, "J. Adhes. 4(2), 155-159. DOI: 10.1080/0021846720807221.
103. Fowkes, F. M. (1983). "Acid-base interactions in polymer adhesion, "in: Physicochemical Aspects of Polymer Surfaces, Vol. 2, Mittall, K. L. (ed.), Plenum Press, New York, 583-603.
104. Fowkes, F. M., Riddle, F. L., Pastore, W. E., and Weber, A. L. (1990). "Interfacial interactions between self-associated polar liquids and squaline used to test equations for solid liquid interfacial interactions, "Colloids Surf. 43, 367-387. DOI: 10.1016/0166-6622(90)80298-I
105. Fowkes, F. M., Kaczinski, M. B., and Dwight, D. W. (1991). "Characterization of polymer surface sites with contact angles of test solutions. 1. Phenol and iodine adsorption from CH2I2 onto PMMA films, "Langmuir 7(11), 2464-2470. DOI: 10.1021/la00059a012.
106. Fox, H. W., Hare, E. F., and Zisman, W. A. (1955). "Wetting properties of organic liquids on high energy surfaces, "J. Phys. Chem. 59(10), 1097-1106. DOI: 10.1021/j150532a027.
107. Fox, H. W., and Zisman, W. A. (1950). "The spreading of liquids on low energy surfaces. 1. Polytetrafluoroethylene, "J. Colloid Interface Sci. 5(6), 514-531. DOI: 10.1016/0095-8522(50)90044-4.
108. Freeman, H. A., and Wangaard, F. F. (1960). "Effect of wettability of wood on glue-line behavior of two urea resins, "Forest Prod. J. 10(6), 311-315.
109. French, A. D., Concha, M., Dowd, M. K., and Stevens, E. D. (2014). "Electron (charge) density studies of cellulose models, "Cellulose 21(2), 1051-1063. DOI: 10.1007/s10570-013-0042-0.
110. French, R. H., Winey, K. I., Yang, M. K., and Qiu, W. M. (2007). "Optical properties and van der Waals-London dispersion interactions of polystyrene determined by vacuum ultraviolet spectroscopy and spectroscopic ellipsometry, "Austral. J. Chem. 60(4), 251-263. DOI: 10.1071/CH06222.
111. Fröberg, J. C., Rojas, O. J., and Claesson, P. M. (1999). "Surface forces and measuring techniques, "International Journal of Mineral Processing 56, 1-30. DOI: 10.1016/S0301-7516(98)00040-4.
112. Frodl, P., and Dietrich, S. (1993). "Thermal and structural properties of the liquid-vapor interface in dipolar fluids, "Phys. Rev. E 48(5), 3741-3759. DOI: 10.1103/PhysRevE.48.3741.
113. Gajewski, A. (2002). "A method for contact angle measurements under flow conditions, "Int. J. Heat Mass Transfer 48, 4829-4834. DOI: 10.1016/j.ijheatmasstransfer.2005.06.012.
114. Gamelas, J. A. F. (2013). "The surface properties of cellulose and lignocellulosic materials assessed by inverse gas chromatography: A review, "Cellulose 20(6), 2675-2693. DOI: 10.1007/s10570-013-0066-5.
115. Gani, R. (2004). "Computer-aided methods and tools for chemical product design, "Chem. Eng. Res. Des. 82(A11), 1494-1504. DOI: 10.1205/cerd.82.11.1494.52032.
116. Gardner, D. J. (1996). "Application of Lifshitz-van der Waals acid-base approach to determine wood surface tension components, "Wood Fiber Sci. 28(4), 422-428.
117. Gardner, D. J., Generalla, N. C., Gunnels, D. W., and Wolcott, M. P. (1991). "Dynamic wettability of wood, "Langmuir 7(11), 2498-2502. DOI: 10.1021/la00059a017.
118. Gardner, D. J., Oporto, G. S., Mills, R., and Samir, M. A. S. A. (2008). "Adhesion and surface issues in cellulose and nanocellulose, "J. Adhes. Sci. Technol. 22(5-6), 545-567. DOI: 10.1163/156856108X295509.
119. Gardner, D. J., Shi, S. Q., and Tze, W. T. (2000). "A Comparison of acid-base characterization techniques on lignocellulosic surfaces, "in: Acid-Base Interactions: Relevance to Adhesion Science and Technology, Vol. 2, Mittal, K. L. (ed.), VSP BV, Utrecht, The Netherlands, pp. 363-383.
120. Gardner, D. J., Wolcott, M. P., Wilson, L., Huang, Y., and Carpenter, M. (1996). "Our understanding of wood surface chemistry in 1995, "in: Wood Adhesives 1995, Proceedings No. 7296, Forest Products Society, Madison, WI. pp. 29-36.
121. Garnier, G., and Glasser, W. G. (1994). "Measurement of the surface free-energy of amorphous cellulose by alkane adsorption-A critical evaluation of inverse gas chromatography (IGC), "J. Adhes. 46, 165-180. DOI: 10.1080/00218469408026658.
122. Gérardin, P., Petric, M., Petrissans, M., Lambert, J., and Ehrhrardt, J. J. (2007). "Evolution of wood surface free energy after heat treatment, "Polym. Degrad. Stabil. 92(4), 653-657. DOI: 10.1016/j.polymdegradstab.2007.01.016.
123. Gharagheizi, F., Eslamimanesh, A., Mohammadi, A. H., and Richon, D. (2011). "Use of artificial neural network-group contribution method to determine surface tension of pure compounds, "J. Chem. Eng. Data 56(5), 2587-2601. DOI: 10.1021/je2001045.
124. Gibbs, J. W. (1961). Scientific Papers, Dover Publ., New York.
125. Gindl, M., Reiterer, A., Sinn, G., and Stanzl-Tschegg, S. E. (2004). "Effects of surface ageing on wettability, surface chemistry, and adhesion of wood, "Holz Roh-Werkstoff62(4), 273-280. DOI: 10.1007/s00107-004-0471-4.
126. Gindl, M., Sinn, G., Gindl, W., Reiterer, A., and Tschegg, S. (2001a). "A comparison of different methods to calculate the surface free energy of wood using contact angle measurements, "Coloids Surf. A 181, 279-287. DOI: 10.1016/S0927-7757(00)00795-0.
127. Gindl, M., Sinn, G., Rieterer, A., and Tschegg, S. (2001b). "Wood surface energy and time dependence of wettability: A comparison of different wood surfaces using an acid-base approach, "Holzforschung 55(4), 433-440. DOI: 10.1515/HF.2001.071.
128. Gindl, M., and Tschegg, S. (2002). "Significance of the acidity of wood to the surface free energy components of different wood species, "Langmuir 18(8), 3209-3212. DOI: 10.1021/la011696s
129. Girifalco, L. A., and Good, R. J. (1957). "A theory for the estimation of surface and interfacial energies. 1. Derivation and application to interfacial tension, "J. Phys. Chem. 61(7), 904-909. DOI: 10.1021/j150553a013.
130. Good, R. J. (1952). "A thermodynamic derivation of Wenzel's modification of Young's equation for contact angles-together with a theory of hysteresis, "J. Amer. Chem. Soc. 74(20), 5041-5042. DOI: 10.1021/ja01140a014.
131. Good, R. J. (1979). "Contact angles and the surface energy of solids, "in: Surface and Colloid Science, Good, R. J., and Stromberg, R. R. (eds.), Plenum Press, New York, pp. 1-29.
132. Good, R. J. (1992). "Contact-angle, wetting, and adhesion-A critical-review, "J. Adhes. Sci. Technol. 6(12), 1269-1302. DOI: 10.1163/156856192X00629.
133. Good, R. J., and Girifalco, L. A. (1960). "A theory for estimation of surface and interfacial energies. 3. Estimation of surface energies of solids from contact angle data, "J. Phys. Chem. 64(5), 561-565. DOI: 10.1021/j100834a012.
134. Gray, V. R. (1992). "The wettability of wood, "Forest Prod. J. 12(9), 452-461.
135. Gray, D. G., Weller, M., Ulkem, N., and Lejeune, A. (2010). "Composition of lignocellulosic surfaces: Comments on the interpretation of XPS spectra, "Cellulose 17(1), 117-124. DOI: 10.1007/s10570-009-9359-0.
136. Guerra, A., Elissetche, J. P., Norambuena, M., Freer, J., Valenzuela, S., Rodriguez, J., and Balocchi, C. (2008). "Influence of lignin structural features on Eucalyptus globulus kraft pulping, "Indust. Eng. Chem. Res. 47(22), 8542-8549. DOI: 10.1021/ie800320d
137. Gun'ko, V., and Bandosz, T. J. (2003). "Heterogeneity of adsorption energy of water, methanol and diethyl ether on activated carbons: Effect of porosity and surface chemistry, "Phys. Chem. Chem. Phys. 5(10), 2096-2103. DOI: 10.1039/b301399p
138. Gunnells, D. W., Gardner, D. J., and Wolcott, M. P. (1994). "Temperature dependence of wood surface energy, "Wood Fiber Sci. 26(4), 447-455.
139. Gutmann, V. (1978). The Donor-Acceptor Approach to Molecular Interactions, Plenum Press, New York, 279 pp. DOI: 10.1007/978-1-4615-8825-2.
140. Gutmann, V., Steininger, A., and Wychera, E. (1966). "Donor strengths in 1, 2-dichloroethane, "Monatsh. Chem. 97(2), 460-467. DOI: 10.1007/BF00905266.
141. Hamaker, H. C. (1937). "The London-van der Waals attraction between spherical particles, "Physica IV, 1058. DOI: 10.1016/S0031-8914(37)80203-7.
142. Hansen, C. M. (2007). Hansen Solubility Parameters: A User's Handbook, 2nd Ed., CRC Press, Boca Raton, FL, USA. DOI: 10.1201/9781420006834.
143. Hansen, C. M., and Björkman, A. (1998). "The ultrastructure of wood from a solubility parameter point of view, "Holzforschung 52(4), 335-344. DOI: 10.1515/hfsg.1998.52.4.335.
144. Harkins, W. D., and Jordan, H. F. (1930). "Surface tension by the ring method, "Science 72, 73-75. DOI: 10.1126/science.72.1855.73.
145. Hawker, M. J., Pegalajar-Jurado, A., and Fisher, E. R. (2015). "Innovative applications of surface wettability measurements for plasma-modified three-dimensional porous polymeric materials: A review, "Plasma Process. Polym. (early view publication). DOI: 10.1002/ppap.201500035.
146. He, S., Lin, L. Y., Fu, F., Zhou, Y. D., and Fan, M. Z. (2014). "Microwave treatment for enhancing the liquid permeability of Chinese fir, "BioResources 9(2), 1924-1938. DOI: 10.15376/biores.9.2.1924-1938.
147. Hearle, J. W. S. (2001). "Physical structure and fiber properties, "in: Regenerated Cellulose Fibres, Woodings, C. (ed.), CRC Press, Boca Raton, FL, Ch. 8, pp. 199-234. DOI: 10.1533/9781855737587.199.
148. Heberger, K. (2007). "Quantitative structure-(chromatographic) retention relationships, "J. Chromatog. A 1158, 273-305. DOI: 10.1016/j.chroma.2007.03.108.
149. Henderson, D. C., and Micale, F. J. (1993). "Dynamic surface tension measurement with the drop mass technique, "J. Colloid Interface Sci. 158(2), 289-294. DOI: 10.1006/jcis.1993.1259.
150. Heng, J. Y. Y., Pearse, D. F., Thielmann, F., Lampke, T., and Bismarck, A. (2007). "Methods to determine surface energies of natural fibers: A review, "Composite Interfaces 14(7-9), 581-604. DOI: 10.1163/156855407782106492.
151. Herczeg, A. (1965). "Wettability of wood, "Forest Prod. J. 15(11), 499-505.
152. Herrington, T. M., and Petzold, J. C. (1992). "An investigation into the nature of charge on the surface of papermaking woodpulps. 2. Analysis of potentiometric titration data, "Colloids Surf. 64, 109-118. DOI: 10.1016/0166-6622(92)80089-K
153. Hiziroglu, S., Zhong, Z. W., and Ong, W. K. (2014). "Evaluating of bonding strength of pine, oak and nyatoh wood species related to their surface roughness, "Measurement 49, 397-400. DOI: 10.1016/j.measurement.2013.11.053.
154. Hodgson, K. T., and Berg, J. C. (1988). "Dynamic wettability properties of single wood pulp fibers and their relationship to absorbency, "Wood Fiber Sci. 20(1), 3-17.
155. Hollertz, R., Arwin, H., Faure, B., Zhang, Y. J., Bergstrom, L., and Wågberg, L. (2013). "Dielectric properties of lignin and glucomannan as determined by spectroscopic ellipsometry and Lifshitz estimates of non-retarded Hamaker constants, "Cellulose 20(4), 1639-1648. DOI: 10.1007/s10570-013-9980-9.
156. Hosseinaei, O., Wang, S. Q., Rials, T. G., Xing, C., and Zhang, Y. (2011). "Effects of decreasing carbohydrate content on properties of wood strands, "Cellulose 18(3), 841-850. DOI: 10.1007/s10570-011-9519-x
157. Hse, C.-Y. (1972). "Wettability of Southern pine veneer by phenol formaldehyde wood adhesives, "Forest Prod. J. 22, 51-56.
158. Huang, X., Kocaefe, D., Boluk, Y., Kocaefe, Y., and Pichette, A. (2012a). "Effect of surface preparation on the wettability of heat-treated jack pine wood surface by different liquids, "Eur. J. Wood Prod. 70(5), 711-717. DOI: 10.1007/s00107-012-0605-z
159. Huang, X., Kocaefe, D., Kocaefe, Y., Boluk, Y., and Pichette, A. (2012b). "Changes in wettability of heat-treated wood due to artificial weathering, ". Wood Sci. Technol. 46(6), 1215-1237. DOI: 10.1007/s00226-012-0479-6
160. Huang, Y., Gardner, D. J., Chen, M., and Biermann, C. J. (1995). "Surface energetics and acid-base character of sized and unsized paper handsheets, "Journal of Adhesion Science and Technology 9(11)1403-1411. DOI: 10.1163/156856195X00086.
161. Hubbe, M. A. (2006). "Bonding between cellulosic fibers in the absence and presence of dry-strength agents-A review, "BioResources 1(2), 281-318.
162. Hubbe, M. A. (2007). "Paper's resistance to wetting-A review of internal sizing chemicals and their effects, "BioResources 2(1), 106-145.
163. Hubbe, M. A., Ayoub, A., Daystar, J. S., Venditti, R. A., and Pawlak, J. J. (2013). "Enhanced absorbent products incorporating cellulose and its derivatives: A Review, "BioResources 8(4), 6556-6629. DOI: 10.15376/biores.8.4.6556-6629.
164. Hubbe, M. A., Chen, H., and Heitmann, J. A. (2009). "Permeability reduction phenomena in packed beds, fiber mats, and wet webs of paper exposed to flow of liquids and suspensions: A review, "BioResources 4(1), 405-451.
165. Hubbe, M. A., Rojas, O. J., and Lucia, L. A. (2015). "Green modification of surface characteristics of cellulosic materials at the molecular or nano scale: A review, "BioResources 10(3), 6095-6229.
166. Hubbe, M. A., Rojas, O. J., Lucia, L. A., and Jung, T. M. (2007). "Consequences of the nanoporosity of cellulosic fibers on their streaming potential and their interactions with cationic polyelectrolytes, "Cellulose 14(6), 655-671. DOI: 10.1007/s10570-006-9098-4.
167. Huber, B., and Schmidt, E. (1936). "Weitere thermos-elektrische Utersuchungen über den Transpirationsstrom der Bäume, "Tharandt. Forestl. Jb. 87, 369-412.
168. Huh, C., and Mason, S. G. (1977). "Effects of surface roughness on wetting (theoretical), "J. Colloid Interface Sci. 60(1), 11-38. DOI: 10.1016/0021-9797(77)90251-X
169. Illig, M. (1805). Moritz Illig is reported to have distributed promotional materials in 1805 to call attention to his system of preparing water-resistant paper by adding rosin and aluminum sulfate to the fiber suspension. See: Garlick, K., http://cool.conservation-us.org/coolaic/sg/bpg/annual/v05/bp05-11.html
170. Ishino, C., and Okumura, K. (2006). "Nucleation scenarios for wetting transition on textured surfaces: The effect of contact angle hysteresis, "Europhys. Let. 76(3), 464-470. DOI: 10.1209/epl/i2006-10288-0.
171. Ishiyama, T., Takahashi, H., and Morita, A. (2012). "Molecular dynamics simulations of surface-specific bonding of the hydrogen network of water: A solution to the low sum-frequency spectra, "Phys. Rev. B. 86(3), article no. 035408. DOI: 10.1103/PhysRevB.86.035408.
172. Jacob, P. N., and Berg, J. C. (1993a). "Zisman analysis of three pulp fiber furnishes, "Tappi 76(2), 105-107.
173. Jacob, P. N., and Berg, J. C. (1993b). "Contact angle titrations of pulp fiber furnishes, "Tappi J. 76(5), 133-137.
174. Jameson, G. J., and del Cerro, M. C. G. (1976). "Theory for the equilibrium contact angle between a gas, a liquid and a solid, "J. Chem. Soc. Faraday Trans. 1(72), 883-895. DOI: 10.1039/f19767200883.
175. Janczuk, B., Chibowski, E., and Straszuk, P. (1983). "Determination of surface free energy components of marble, "J. Colloid Interface Sci. 96(1), 1-6. DOI: 10.1016/0021-9797(83)90002-4.
176. Jeffrey, G. A. (1997). An Introduction to Hydrogen Bonding, Oxford Univ. Press, New York.
177. Jennings, J. D., Zink-Sharp, A., Frazier, C. E., and Kamke, F. A. (2006). "Properties of compression-densified wood. Part II: Surface energy, "J. Adhes. Sci. Technol. 20(4), 335-344. DOI: 10.1163/156856106776381802.
178. Jirjis, R. (1995). "Storage and drying of wood fuel, "Biomass Bioenergy 9, 181-190 DOI: 10.1016/0961-9534(95)00090-9.
179. Johnson, R. E. Jr. (1959). "Conflicts between Gibbsian thermodynamics and recent treatments of interfacial energies in solid-liquid-vapor systems, "J. Phys. Chem. 63(10), 1655-1658. DOI: 10.1021/j150580a021.
180. Johnson, R. E. Jr., and Dettré, R. H. (1964a). "Contact angle hysteresis. 3. Study of an idealized heterogeneous surface, "J. Phys. Chem. 68(7), 1744-1750. DOI: 10.1021/j100789a012.
181. Johnson, R. E. Jr., and Dettré, R. H. (1964b). "Contact angle hysteresis. 1. Study of an idealized rough surface, "Adv. Chem. Ser. 43, 112-135. Chapter DOI: 10.1021/ba-1964-0043.ch007.
182. Johnson, R. E., and Dettré, R. H. (1989). "An evaluation of Neumann surface equation of state, "Langmuir 5(1), 293-295. DOI: 10.1021/la00085a061.
183. Johnson, R. E., Dettré, R. H., and Brandreth, D. A. (1977). "Dynamic contact angles and contact angle hysteresis, "J. Colloid Interface Sci. 62(2), 205-212. DOI: 10.1016/0021-9797(77)90114-X
184. Joseph, D. D., Arney, M. S., Gillberg, G., Hu. H., Heltman, D., Verdier, C., and Vinagre, T. M. (1992). "A spinning drop tensioextensiometer, "J. Rheol. 36(4), 621-662. DOI: 10.1122/1.550311.
185. Kadla, J. F., and Gilbert, R. D. (2000). "Cellulose structure: A review, "Cellulose Chem. Technol. 34(3-4), 197-216.
186. Kaelble, D. H. (1970). "Dispersion-polar surface tension properties of organic solids, "J. Adhesion Adhesives 2, 66-81. DOI: 10.1080/0021846708544582.
187. Kaelble, D. H., and Uy, K. C. (1970). "A reinterpretation of organic liquidpolytetrafluoroethylene surface interactions, "J. Adhesion 2(1), 50-60. DOI:10.1080/0021846708544579.
188. Kalia, S., Kaith, B. S., and Kaur, I. (2009). "Pretreatments of natural fibers and their application as reinforcing material in polymer composites-A review, "Polymer Eng. Sci. 49(7), 1253-1272. DOI: 10.1002/pen.21328.
189. Kalnins, M. (1987). "Wettability and water repellency of wood, "in: Wood and Cellulosics, Kennedy, J. P., Phillips, G. O., and Williams, P. (eds.), Ch. 45, p. 409.
190. Kalnins, M., and Feist, W. C. (1993). "Increase in wettability in wood with weathering, "For. Prod. J. 43, 55-57.
191. Kalnins, M. A., Katzenberger, C., Schmieding, S. A., and Brooks, J. K. (1988). "Contact angle measurement on wood using videotape technique, "J. Colloid Interface Sci. 125, 344-346. DOI: 10.1016/0021-9797(88)90084-7.
192. Kamdem, D. P., and Riedl, B. (1992). "Inverse gas chromatography of lignocellulosic fibers coated with a thermosetting polymer: Use of peak maximum and Conder and Young methods, "J. Colloid Interf. Sci. 150(2), 507-516. DOI: 10.1016/0021-9797(92)90219-C
193. Kamusewitz, H., and Possart, W. (2006). "The static contact angle hysteresis and Young's equilibrium contact angle, "in: Contact Angle, Wettability and Adhesion, Vol. 4, Mittal, K. L. (ed.), VSP, Leiden, Boston, pp. 101-114.
194. Kannangara, D., and Shen, W. (2008). "Roughness effects of cellulose and paper substrates on water drop impact and recoil, "Colloids and Surfaces A 330, 151-160. DOI: 10.1016/j.colsurfa.2008.07.056.
195. Kannangara, D., Zhang, H., and Shen, W. (2006). "Liquid-paper interactions during liquid drop impact and recoil on paper surfaces, "Colloids Surf. A 280, 203-215. DOI: 10.1016/j.colsurfa.2006.02.008.
196. Karger, B. L., Snyder, L. R., and Eon, C. (1976). "An expanded solubility parameter treatment for classification and use of chromatographic solvents and adsorbents. Parameters for dispersion, dipole and hydrogen bonding interactions, "J. Chromatogr. 125(1), 71-88. DOI: 10.1016/S0021-9673(00)93812-3.
197. Kazayawoko, M., Neumann, A. W., and Balatinecz, J. J. (1997). "Estimating the wettability of wood by the axisymmetric drop shape analysis-contact diameter method, "Wood Sci. Technol. 31(2), 87-95. DOI: 10.1007/BF00705924.
198. Keesom, W. H. (1915). "The second virial coefficient for rigid spherical molecules whose mutual attraction is equivalent to that of a quadruplet placed at its center, "Proc. Royal Acad. Sci. 18, 636-646.
199. Kent, H. J., and Lyne, M. B. (1989). "On the penetration of printing ink into paper, "Nordic Pulp Paper Res. J. 4(2), 141-145. DOI: 10.3183/NPPRJ-1989-04-02-p141-145.
200. Kettle, J., Lamminmäki, T., and Gane, P. (2010). "A review of modified surfaces for high speed inkjet coating, "Surf. Coatings Technol. 204(12-13), 2103-2109. DOI: 10.1016/j.surfcoat.2009.10.035.
201. Kitin, P., Fujii, T., Abe, H., and Takata, K. (2009). "Anatomical features that facilitate radial flow across growth rings and from xylem to cambium in Cryptomeria japonica, "Annals Botany 103(7), 1145-1157. DOI: 10.1093/aob/mcp050.
202. Klungness, J. H. (1981). "Measuring the wetting angle and perimeter of single wood pulp fibers: A modified method, "Tappi 64(12), 65-66.
203. Komuraiah, A., Kumar, N. S., and Prasad, B. D. (2014). "Chemical composition of natural fibers and its influence on their mechanical properties, "Mechanics Compos. Mater. 50(3), 359-376. DOI: 10.1007/s11029-014-9422-2.
204. Kontturi, E., Tammelin, T., and österberg, M. (2006). "Cellulose-Model films and the fundamental approach, "Chem. Soc. Rev. 35, 1287-1304. DOI: 10.1039/b601872f Kudela, J. (2014). "Wetting of wood surface by liquids of different polarity, "Wood Res. 59(1), 11-24.
205. Kutnar, A., Rautkari, L., Laine, K., and Hughes, M. (2012). "Thermodynamic characteristics of surface densified solid Scots pine wood, "Eur. J. Wood Prods. 70(5), 727-734. DOI: 10.1007/s00107-012-0609-8.
206. Kwok, D. Y., Li, D., and Neumann, A. W. (1994). "Evaluation of the Lifshitz-van der Waals/acid-base approach to determine interfacial tensions, "Langmuir 10(4), 1323-1328. DOI: 10.1021/la00016a057.
207. Kwok, D. Y., and Neumann, A. W. (1999). "Contact angle measurement and contact angle interpretation, "Adv. Colloid Interface Sci. 81(3), 167-249. DOI: 10.1016/S0001-8686(98)00087-6.
208. Labajos-Broncano, L., González-Martín, M. L., Bruque, J. M., González-García, C. M., and Janczuk, B. (1999). "On the use of Washburn's equation in the analysis of weight-time measurements obtained from imbibition experiments, "J. Colloid Interface Sci. 219(2), 275-281. DOI: 10.1006/jcis.1999.6492.
209. Labib, M. E., and Williams, R. (1984). "The use of zeta potential measurements in organic solvents to determine the donor-acceptor properties of solid surfaces, "J. Colloid Interface Sci. 97(2), 356-366. DOI: 10.1016/0021-9797(84)90306-0.
210. Lai, C., Sheng, L. Y., Liao, S. B., Xi, T. F., and Zhang, Z. X. (2013). "Surface characterization of TEMPO-oxidized bacterial cellulose, "Surf. Interface Anal. 45(11-12), 1673-1679. DOI: 10.1002/sia.5306.
211. Laine, J., Buchert, J., Viikari, L., and Stenius, P. (1996). "Characterization of unbleached kraft pulps by enzymatic treatment, potentiometric titration, and polyelectrolyte adsorption, "Holzforschung 50(3), 208-214. DOI: 10.1515/hfsg.1996.50.3.208.
212. Laine, J., and Stenius, P. (1997). "Effect of charge on the fibre and paper properties of bleached industrial kraft pulps, "Paperi ja Puu 79(4), 257-266.
213. Lam, C. N. C., Ko, R. H. Y., Yu, L. M. Y., Ng, A., Li, D., Hair, M. L., and Neumann, A. W. (2001). "Dynamic cycling contact angle measurements: Study of advancing and receding contact angles, "J. Colloid Interface Sci. 243(1), 208-218. DOI: 10.1006/jcis.2001.7840.
214. Lasaga, A. C., and Luttge, A. (2004). "Mineralogical approaches to fundamental crystal dissolution kinetics, "Amer. Mineralog. 89(4), 527-540.
215. Lee, B.-B., Ravindra, P., and Chan, E.-S. (2008). "A critical review: Surface and interfacial tension measurement by the drop weight method, "Chem. Eng. Commun. 195(8), 8889-924. DOI: 10.1080/00986440801905056.
216. Lee, S. B., Kim, I. H., Ryu, D. D. Y., and Taguchi, H. (1983). "Structural properties of cellulose and cellulase reaction mechanism, "Biotechnol. Bioeng. 25(1), 33-51. DOI: 10.1002/bit.260250105.
217. Lee, S. B., and Luner, P. (1972). "The wetting and interfacial properties of lignin, "Tappi 55(1), 116-121.
218. Leger, L., and Joanny, J. F. (1992). "Liquid spreading, "Rep. Prog. Phys. 55, 431-486. DOI: 10.1088/0034-4885/55/4/001.
219. Lehringer, C., Hillebrand, K., Richter, K., Arnold, M., Schwarze, F. W. M. R., and Militz, H. (2010). "Anatomy of bioincised Norway spruce wood, "Internat. Biodeter. Biodegrad. 64(5), 346-355. DOI: 10.1016/j.ibiod.2010.03.005.
220. Lepoutre, P., Inoue, M., and Aspler, J. S. (1985). "Wetting time and critical surface tension, "Tappi 68(12), 86-87.
221. Li, D., and Neumann, A. W. (1992). "Equation of state for interfacial tensions of solid-liquid systems, "Advan. Colloid Interface Sci. 39, 299-345. DOI: 10.1016/0001-8686(92)80064-5.
222. Li, T. L., Liu, S. B., Feng, S. X., and Aubrey, C. E. (2005). "Face-integrated Fukui function: Understanding wettability anisotropy of molecular crystals from density function theory, "J. Amer. Chem. Soc. 127(5), 1364-1365. DOI: 10.1021/ja0476009.
223. Li, T. Q., Henriksson, U., and Ödberg, L. (1993). "Determination of pore sizes in wood cellulose fibers by 2H and 1H NMR, "Nordic Pulp Paper Res. J. 8(3), 326-330. DOI: 10.3183/NPPRJ-1993-08-03-p326-330.
224. Li, W. D., Wang, C., Zhang, Y., Jia, C., Gao, C. C., and Jin, J. W. (2014). "The influence of hot compression on the surface characteristics of poplar veneer, "BioResources 9(2), 2808-2823. DOI: 10.15376/biores.9.2.2808-2823.
225. Li, Y. L. (2014a). "Effect of woody biomass surface free energy on the mechanical properties and interface of wood/polypropylene composites, "J. Adhes. Sci. Technol. 28(2), 215-224. DOI: 10.1080/01694243.2013.835951.
226. Li, Y. L. (2014b). "Characterization of acetylated eucalyptus wood fibers and its effect on the interface of eucalyptus wood/polypropylene composites, "Intl. J. Adhes. Adhes. 50, 96-101. DOI: 10.1016/j.ijadhadh.2014.01.002.
227. Lifshitz, E. M. (1955). "Theory of molecular attractive forces between solids, "Zh. Eksp. Teor. Fiz. 29, 94-110.
228. Lindström, T., and Larsson, P. T. (2008). "Alkyl ketene dimer (AKD) sizing-A review, "Nordic Pulp Paper Res. J. 23(2), 202-209. DOI: 10.3183/NPPRJ-2008-23-02-p202-209.
229. Liptáková, E., and Kúdela, J. (1997). "Analysis of the wood-wetting process, "Holzforschung 48, 139-144. DOI: 10.1515/hfsg.1994.48.2.139.
230. Liptáková, E., Kúdela, J., Bartl, Z., and Spirovová, I. (1994). "Influence of mechanical surface treatment of wood on the wetting process, "Holzforschung 49, 369-375. DOI: 10.1515/hfsg.1995.49.4.369.
231. Liptáková, E., Kudela, J., and Sarvas, J. (1998). "Problems concerning equilibrium state on the wood-liquid phase boundary, "in: Wood Structure and Properties '98, Kurjatko, S., and Kudela, J. (eds.), Arbora Publishers, Zvolen, pp.109-114.
232. Little, N. S., McConnell, T. E., Irby, N. E., Shi, S. Q., and Riggins, J. J. (2013). "Surface free energy of blue-stained southern pine sapwood bark beetle-attacked trees, "Wood Fiber Sci. 45(2), 206-214.
233. Liu, F. P., Gardner, D. J., and Wolcott, M. P. (1995). "A model for the description of polymer surface dynamic behavior. 1. Contact angle vs. polymers surface properties, "Langmuir 11(7), 2674-2681. DOI: 10.1021/la00007a056.
234. London, F. (1930). "Zur Theorie und Systematik der Molekularkräfte, "Z. Phys. 63, 245-279. DOI: 10.1007/BF01421741.
235. Long, J., Hyder, M. N., Huang, R. Y. M., and Chen, P. (2005). "Thermodynamic modeling of contact angles on rough, heterogeneous surfaces, "Advan. Colloid Interface Sci. 118, 173-190. DOI: 10.1016/j.cis.2005.07.004.
236. López-Garzón, F. J., Pyda, M., and Domingo-Garcia, M. (1993). "Studies of the surface properties of active carbons by inverse gas-chromatography at infinite dilution, "Langmuir 9(2), 531-536. DOI: 10.1021/la00026a028.
237. Lu, J. Z., and Wu, Q. (2006). "Surface characterization of chemically modified wood: Dynamic wettability, "Wood Fiber Sci. 38, 497-511.
238. Lu, Y., Wei, X. Y., Zong, Z. M., Lu, Y. C., Zhao, W., and Cao, J. P. (2013). "Structural investigation and application of lignins, "Prog. Chem. 25(5), 838-858.
239. Lucas, R. (1918). "Ueber das Zeitgesetz des kapillaren Aufstiegs von Flüssigkeiten, "Kolloid Zeitschrift 23(1), 15-22. DOI: 10.1007/BF01461107.
240. Lucas, S. (2013). Bamboo, Reaktion Books, London.
241. Luner, P., and Sandell, M. (1969). "The wetting of cellulose and wood hemicelluloses, "J. Polymer Sci. Part C. 28, 115-142. DOI: 10.1002/polc.5070280112.
242. Lyklema, J. (1999). "The surface tension of pure liquids-Thermodynamic components and corresponding states, "Colloids Surf. A. 156, 413-421. DOI: 10.1016/S0927-7757(99)00100-4.
243. Lyne, M. B. (1993). "On the interaction of liquids with paper under dynamic conditions, "in: Products of Papermaking, Baker, C. F. (ed.), Mechan. Engin. Publ. Ltd., Vol. 2, pp. 885-909.
244. Lyne, M. B. (2002). "Wetting and penetration of liquids into paper, "in: Handbook of Physical Testing of Paper, Marcel Dekker, New York, Ch. 7, pp. 303-332.
245. Lyne, M. B., and Huang, Y. C. (1993). "Measuring acid-base and dispersive interactions with paper surfaces under dynamic conditions, "Nordic Pulp Paper Res. J. 8(1), 120-122. DOI: 10.3183/NPPRJ-1993-08-01-p120-122.
246. Mahlberg, R., Niemi, H. E.-M., Denes, F., and Rowell, R. M. (1998). "Effect of oxygen and hexamethyldisiloxane plasma on morphology, wettability and adhesion properties of polypropylene and lignocellulosics, "Intl. J. Adhes. Adhes. 18(4), 283-297. DOI: 10.1016/S0143-7496(98)00007-4.
247. Maldas, D. C., and Kamdem, D. P. (1998). "Surface tension and wettability of CCA-treated red maple, "Wood Fiber Sci. 30(4), 368-373.
248. Mantanis, G. I., and Young, R. A. (1997). "Wetting of wood, "Wood Sci. Technol. 31(5), 339-353. DOI: 10.1007/BF01159153.
249. Marmur, A. (1994). "Contact-angle hysteresis on heterogeneous smooth surfaces, "J. Colloid Interface Sci. 168(1), 40-46. DOI: 10.1006/jcis.1994.1391.
250. Marmur, A. (2006). "Soft contact: Measurement and interpretation of contact angles, "Soft Matter 2, 12-17. DOI: 10.1039/B514811C
251. Masoodi, R., and Pillai, K. M. (2010). "Darcy's law-based model for wicking in paperlike swelling porous media, "AIChE J. 56(9), 2257-2267. DOI: 10.1002/aic.12163.
252. Masoodi, R., Pillai, K. M., and Varanasi, P. P. (2010). "Effect of externally applied liquid pressure on wicking in paper wipes, "J. Engineered Fibers Fabrics 5(3), 49-66.
253. Masoodi, R., Tan, H., and Pillai, K. M. (2011). "Darcy's law-based numerical simulation for modeling 3D liquid absorption into porous wicks, "AIChE J. 57(5), 1132-1143 DOI: 10.1002/aic.12343.
254. Mayer, U., Gutmann, V., and Gerger, W. (1975). "The acceptor number-A quantitative empirical parameter for electrophilic properties of solvents, "Monatsh. Chem. 106(6), 1235-1257. DOI: 10.1007/BF00913599.
255. Mecke, M., Fischer, J., and Winkelmann, J. (2001). "Molecular dynamics simulation of the liquid-vapor interface of dipolar fluids under different electrostatic boundary conditions, "J. Chem. Phys. 114(13), 5842-5852. DOI: 10.1063/1.1349177.
256. Medronho, B., and Lindman, B. (2014). "Competing forces during cellulose dissolution: From solvents to mechanisms, "Current Opin. Colloid Interface Sci. 19(1), 32-40. DOI: 10.1016/j.cocis.2013.12.001.
257. Mei, C. Q., Fan, Y. M., Mei, L., and Luo, G. Q. (2013). "Surface characteristics of modified poplar wood-flour and its effect on the mechanical properties of wood polymer composites, "Rev. Advan. Mater. Sci. 33(3), 203-210.
258. Meiron, T. S., Marmur, A., and Saguy, I. S. (2004). "Contact angle measurement on rough surfaces, "J. Colloid Interface Sci. 274(2), 637-644. DOI: 10.1016/j.jcis.2004.02.036.
259. Miller, B., Penn, L. S., and Hedvat, S. (1983). "Wetting force measurement on single fibers, "Colloids Surf. 6(1), 49-61. DOI: 10.1016/0166-6622(83)80006-7.
260. Milne, A. J. B., and Amirfazli, A. (2012). "The Cassie equation: How it is meant to be used, "Advan. Colloid Interface Sci. 170, 48-55. DOI: 10.1016/j.cis.2011.12.001.
261. Modaressi, H., and Garnier, G. (2002). "Mechanism of wetting and absorption of water droplets on sized paper: Effects of chemical and physical heterogeneity, "Langmuir 18(3), 642-649. DOI: 10.1021/la0104931.
262. Moghaddam, M. S., Claesson, P. M., Wålinder, M. E. P., and Swerin, A. (2014). "Wettability and liquid sorption of wood investigated by Wilhemy plate method, "Wood Sci. Technol. 48(1), 161-176. DOI: 10.1007/s00226-013-0592-1.
263. Moghaddam, M. S., Wålinder, M. E. P., Claesson, P. M., and Swerin, A. (2013). "Multicycle Wilhelmy plate method for wetting properties, swelling, and liquid sorption of wood, "Langmuir 29, 12145-12153. DOI: 10.1021/la402605q
264. Mohammed-Ziegler, I., Oszlánczi, Á., Somfai, B., Hórvölgyi, Z., Pászli, I, Holmgren, A., and Forsling, W. (2004). "Surface free energy of natural and surface-modified tropical and European wood species, "J. Adhes. Sci. Technol. 18(6), 687-713. DOI: 10.1163/156856104839338.
265. Mohammed-Ziegler, I., Tánczos, I., Hórvölgyi, Z., and Agoston, B. (2008). "Waterrepellent acylated and silylated wood samples and their surface analytical characterization, "Colloids Sur. A 319, 204-212. DOI: 10.1016/j.colsurfa.2007.06.063.
266. Morra, M. (1996). "Some reflection on the evaluation of the Lewis acid-base properties of polymer surfaces by wetting measurements, "J. Colloid Interface Sci. 182(1), 312-314. DOI: 10.1006/jcis.1996.0469.
267. Nakae, N., Inui, R., Hirata, Y., and Saito, H. (1998). "Effects of surface roughness on wettability, "Acta Mater. 46, 2313-2318. DOI: 10.1016/S1359-6454(97)00387-X
268. Narayan, R., and Hancock, B. C. (2005). "The influence of particle size on the surface roughness of pharmaceutical excipient compacts, "Mater. Sci. Eng. A-Struc. Mater. Prop. Microstruc. Processing 407, 226-233. DOI: 10.1016/j.msea.2005.06.060.
269. Nasroun, T. H., and Al-Shahrani, T. S. S. (1998). "The relationship between anatomical structure and some physical properties of wood: (3) The relationship between anatomical properties and permeability of wood, "Arab Gulf Journal of Scientific Research 16(3), 657-676.
270. Navarro-Lupión, F. J., Bustamante, P., and Escalera, B. (2005). "Relationship between swelling of hydroxypropylmethylcellulose and the Hansen and Karger partial solubility parameters, "J. Pharm. Sci. 94(7), 1608-1616. DOI: 10.1002/jps.20370.
271. Neumann, A. W., Good, R. J., Hope, C. J., and Sejpal, M. (1974). "An equation of state approach to determine surface tension of low-energy solids from contact angles, "J. Colloid Interface Sci. 49(2), 291-304. DOI: 10.1016/0021-9797(74)90365-8.
272. Nguyen, T., and Johns, W. E. (1978). "Polar and dispersion force contributions to the total surface free energy of wood, "Wood Sci. Technol. 12(1), 63-74. DOI: 10.1007/BF00390011.
273. Nguyen, T., and Johns, W. E. (1979). "The effects of aging and extraction on the surface free energy of Douglas fir and redwood, "Wood Sci. Technol. 13(1), 29-40. DOI: 10.1007/BF00350173.
274. Ni, W., Chen, J. F., Xu, Q. (2008). "Synthesis and characterization of hierarchically porous silica with poplar tissue as template with assistance of supercritical CO2, "BioResources 3(2), 461-476.
275. Nishiyama, Y., Kim, U.-J., Kim, D.-Y., Katsumata, K. S., May, R. P., and Langan, P. (2003). "Periodic disorder along ramie cellulose microfibrils, "Biomacromol. 4, 1013-1017. DOI: 10.1021/bm025772x
276. Norgren, M., and Edlund, H. (2014). "Lignin: Recent advances and emerging applications, "Current Opin. Colloid Interface Sci. 19(5), 409-416. DOI: 10.1016/j.cocis.2014.08.004.
277. Norgren, M., and Lindström, B. (2000). "Dissociation of phenolic groups in kraft lignin at elevated temperatures, "Holzforschung 54(5), 519-527. DOI: 10.1515/HF.2000.088.
278. Nussbaum, R. M. (1999). "Natural surface inactivation of Scots pine and Norway spruce evaluated by contact angle measurements, "Holz Roh-Werkstoff57, 419-424. DOI: 10.1007/s001070050067.
279. Oliver, J. F., Huh, C., and Mason, S. G. (1977). "Resistance to spreading of liquids by sharp edges, "J. Colloid Interface Sci. 59(3), 568-581. DOI: 10.1016/0021-9797(77)90052-2.
280. Oporto, G. S., Gardner, D. J., Kiziltas, A., and Neivandt, D. J. (2011). "Understanding the affinity between components of wood-plastic composites from a surface energy perspective, "J. Adhes. Sci. Technol. 25(15), 1785-1801. DOI: 10.1163/016942410X525759.
281. Owens, D. K., and Wendt, R. C. (1969). "Estimation of the surface free energy of polymers, "J. Appl. Polym. Sci. 13, 1741-1747. DOI: 10.1002/app.1969.070130815.
282. Panek, M., Reinprecht, L., and Mamonova, M. (2013). "Trichoderma viride for improving spruce wood impregnability, "BioResources 8(2), 1731-1746. DOI: 10.15376/biores.8.2.1731-1746.
283. Paredes, J. J., Mills, R., Shaler, S. M., Gardner, D. J., and van Heiningen, A. (2009). "Surface characterization of red maple strands after hot water extraction, "Wood Fiber Sci. 41(1), 38-50.
284. Payne, C. J., Woodward, S., and Petty, J. A. (2001). "Wettability of Sitka spruce timber stored in a Scottish sawmill yard, "Wood Sci. Technol. 35(1-2), 107-115. DOI: 10.1007/s002260000079.
285. Payne, K. C., Jackson, C. D., Aizpurua, C. E., Rojas, O. J., and Hubbe, M. A. (2012). "Oil spills abatement: Factors affecting oil uptake by cellulosic fibers, "Environ. Sci. Technol. 46, 7725-7730. DOI: 10.1021/es3015524.
286. Peng, Y., Gardner, D. J., Han, Y., Cai, Z., and Tshabalala, M. A. (2013). "Influence of drying method on the surface energy of cellulose nanofibrils determined by inverse gas chromatography, "Journal of Colloid & Interface Science. 405, 85-95. DOI: 10.1016/j.jcis.2013.05.033.
287. Peršin, Z, Stana-Kleinschek, K., Sfilgoj-Smole, M., Kreže, T., and Ribitsch, V. (2004). "Determining the surface free energy of cellulose materials with the powder contact angle method, "Textile Res. J. 74(1), 55-62. DOI: 10.1177/004051750407400110.
288. Peršin, Z., Vesel, A., Stana Kleinschek, K., and Mozetic, M. (2012). "Characterisation of surface properties of chemical and plasma treated regenerated cellulose fabric, "Textile Res. J. 82(20), 2078-2089. DOI: 10.1177/0040517512445338.
289. Persson, P. V., Hafren, J., Fogden, A., Daniel, G., and Iversen, T. (2004). "Silica nanocasts of wood fibers: A study of cell-wall accessibility and structure, "Biomacromolecules 5(3), 1097-1101. DOI: 10.1021/bm034532u
290. Petric, M. (2013). "Surface modification of wood: A critical review, "Rev. Adhesion Adhesives 1(2), 216-247. DOI: 10.7569/RAA.2013.097308.
291. Petric, M., and Oven, P. (2015). "Determination of wettability of wood and its significance in wood science and technology, "Rev. Adhesion Adhesives 3(2), 121-187. DOI: 10.7569/RAA.2015.097304.
292. Petrov, J. G., Ralston, J., Schneemilch, M., and Hayes, R. A. (2003). "Dynamics of partial wetting and dewetting in well-defined systems, "J. Phys. Chem. B 107, 1634-1645. DOI: 10.1021/jp026723h
293. Petty, J. A., and Palin, M. A. (1983). "Permeability to water of the fibre cell wall material of two hardwoods, "J. Exp. Bot. 34(6), 688-693. DOI: 10.1093/jxb/34.6.688.
294. Piao, C., Winandy, J. E., and Shupe, T. F. (2010). "From hydrophilicity to hydrophobicity: A critical review: Part 1. Wettability and surface behavior, "Wood Fiber Sci. 42(4), 490-510.
295. Pizzi, A. (2006). "Recent developments in eco-efficient bio-based adhesives for wood bonding: Opportunities and issues, "J. Adhes. Sci. Technol. 20(8), 829-846. DOI: 10.1163/156856106777638635.
296. Planinšek, O., and Buckton, G. (2003). "Inverse gas chromatography: Considerations about appropriate use for amorphous and crystalline powders, "J. Pharm. Sci. 92(6), 1286-1294. DOI: 10.1002/jps.10394.
297. Podgorski, L., Chevet, B., Onic, L, and Merlin, A. (2000). "Modification of wood wettability by plasma and corona treatments, "Int. J. Adhesion Adhesives 20, 103-111. DOI: 10.1016/S0143-7496(99)00043-3.
298. Pönni, R., Vuorinen, T., and Kontturi, E. (2012). "Proposed nano-scale coalescence of cellulose in chemical pulp fibers during technical treatments, "BioResources 7(4), 6077-6108. DOI: 10.15376/biores.7.4.6077-6108.
299. Porcheron, F., and Monson, P. A. (2006). "Mean-field theory of liquid droplets on roughened solid surfaces: Application to superhydrophobicity, "Langmuir 22(4), 1595-1601. DOI: 10.1021/la051946v
300. Qin, Z. Y., Gao, Q., Zhang, S. F., and Li, J. Z. (2014). "Surface free energy and dynamic wettability of differently machined poplar woods, "BioResources 9(2), 3088-3103. DOI: 10.15376/biores.9.2.3088-3103.
301. Riedl, B., and Kamdem, D. P. (1992). "Estimation of the dispersive component of surface energy of polymer grafted lignocellulosic fibers with inverse gas chromatography, "J. Adhes. Sci. Tech. 6, 1053-1067. DOI: 10.1163/156856192X00935.
302. Riddle, F. L. Jr., and Fowkes, F. M. (1990). "Spectral shifts in acid-base chemistry. 1. van der Waals contributions to acceptor numbers, "J. Amer. Chem. Soc. 112(9), 3259-3264. DOI: 10.1021/ja00165a001.
303. Roberts, R. J., Senden, T. J., Knackstedt, M. A., and Lyne, M. B. (2003). "Spreading of aqueous liquids in unsized papers is by film flow, "Journal of Pulp and Paper Science 29(4), 123-131.
304. Rodionova, G., Eriksen, Ø., and Gregersen, Ø. (2012). "TEMPO-oxidized cellulose nanofiber films: Effect of surface morphology on water resistance, "Cellulose 19(4), 1115-1123. DOI: 10.1007/s10570-012-9721-5.
305. Rodríguez-Valverde, M. A., Cabrerizo-Vílchez, M. A., Rosales-López, P., Páez-Dueñas, A., and Hidalgo-álverez, R. (2002). "Contact angle measurements of two (wood and stone) non-ideal surfaces, "Colloids Surf. A. 206, 485-495. DOI: 10.1016/S0927-7757(02)00054-7.
306. Roosta, A., Setoodeh, P., and Jahanmiri, A. (2012). "Artificial neural network modeling of surface tension for pure organic compounds, "Ind. Eng. Chem. Res. 51(1), 561-566. DOI: 10.1021/ie2017459.
307. Rosen, A., and Hemstock, G. A. (1967). "A method for determining the surface roughness and receptivity characteristics of blade coating raw stock, "Tappi 50(1), 7-12.
308. Rosenholm, J. B. (2010). "Critical comparison of molecular mixing and interaction models for liquids, solutions and mixtures, "Advan. Colloid Interface Sci. 156, 14-34. DOI: 10.1016/j.cis.2010.02.005.
309. Rossi, D., Rossi, S., Morin, H., and Bettero, A. (2012). "Within-tree variations in the surface free energy of wood assessed by contact angle analysis, "Wood Sci. Technol. 46, 287-298. DOI: 10.1007/s00226-011-0407-1.
310. Ruiz-Cabello, F. J. M., Rodríguez-Valverde, M. A., Marmur, A., and Cabrerizo-Vílchez, M. A. (2011). "Comparison of sessile drop and captive bubble methods on rough homogeneous surfaces: A numerical study, "Langmuir 27, 9638-9643. DOI: 10.1021/la201248z
311. Salminen, P. J. (1988). "Water transport into paper-The effect of some liquid and paper variables, "Tappi J. 71(9), 195-200.
312. Samyn, P. (2013). "Wetting and hydrophobic modification of cellulose surfaces for paper applications, "J. Mater Sci. 48(19), 6455-6498. DOI: 10.1007/s10853-013-7519-y
313. Sánchez-Arellano, E., Benavides, A. L., and Alejandre, J. (2012). "Surface tension and phase coexistence for fluids of molecules with extended dipoles, "J. Chem. Phys. 137(11), article no. 114708. DOI: 10.1063/1.4754125.
314. Santoni, I., and Pizzo, B. (2011). "Effect of surface preparation on the wettability of heattreated jack pine wood surface by different liquids, "Int. J. Adhesion Adhesives 31(7), 743-753. DOI: 10.1016/j.ijadhadh.2011.07.002.
315. Scheller, H. V., and Ulvskov, P. (2010). "Hemicelluloses, "Annual Rev. Plant. Biol. 61, 263-289. DOI: 10.1146/annurev-arplant-042809-112315.
316. Schurz, J., and Lenz, J. (1994). "Investigations on the structure of regenerated cellulose fibers, "Macromol. Symp. 83, 273-289. DOI: 10.1002/masy.19940830123.
317. Shafrin, E. G., and Zisman, W. A. (1967). "Critical surface tension for spreading on a liquid substrate, "J. Phys. Chem. 71(6), 1309-1316. DOI: 10.1021/j100864a020.
318. Shen, Q. (2009). "Surface properties of cellulose and cellulose derivatives: A review, "in: Model Cellulose Surfaces, Roman, M. (ed.), ACS Symp. Ser., American Chemical Society, Washington, DC, Ch. 12, pp. 259-289. DOI: 10.1021/bk-2009-1019.ch012.
319. Shen, Q., and Rosenholm, J. B. (1998). "Kraft black liquors properties in relation to delignification, "Nordic Pulp Paper Res. J. 13(3), 206-210. DOI: 10.3183/NPPRJ-1998-13-03-p206-210.
320. Shen, W., Filonanko, Y, Truong, Y., Parker, I. H., Brack, N., Pigram, P., and Liesegang, J. (2000). "Contact angle measurement and surface energetics of sized and unsized paper, "Colloids Surf. A 173, 117-126. DOI: 10.1016/S0927-7757(00)00454-4.
321. Shen, W., Sheng, Y. J., and Parker, I. H. (1999). "Comparison of the surface energetics data of eucalypt fibers and some polymers obtained by contact angle and inverse gas chromatography methods, "J. Adhes. Sci. Technol. 13(8), 887-901. DOI: 10.1163/156856199X00730.
322. Shi, B. L. (2007). "Relationship between Hansen solubility parameters and Lewis acidbase parameters of solvents, "J. Macromol. Sci. Part B-Physics 47(1), 174-179. DOI: 10.1080/00222340701746192.
323. Shi, S. Q., and Gardner, D. J. (2000). "A new model to determine contact angles on swelling polymer particles by the column wicking method, "J. Adhes. Sci. Technol. 14(2), 301-314. DOI: 10.1163/156856100742564.
324. Shi, S. Q., and Gardner, D. J. (2001). "Dynamic adhesive wettability of wood, "Wood and Fiber Science 33(1), 58-68.
325. Shimizu, K.-I., Furukawa, H., Kobayashi, N., Itaya, Y., and Satsuma, A. (2009). "Effects of Brønsted and Lewis acidities on activity and selectivity of heteropolyacid-based catalysts for hydrolysis of cellobiose and cellulose, "Green Chem. 11(10), 1627-1632. DOI: 10.1039/b913737h
326. Shotton, D. M. (1989). "Confocal scanning optical microscopy and its applications for biological specimens, "J. Cell Sci. 94, 175-206.
327. Shuttleworth, R. (1950). "The surface tension of solids, "Proc. Phys. Soc. 63(365), 444-457. DOI: 10.1088/0370-1298/63/5/302.
328. Shuttleworth, R., and Bailey, G. L. J. (1948). "The spreading of a liquid over a rough solid, "Disc. Faraday Soc. 3, 16-22. DOI: 10.1039/df9480300016.
329. Simoncic, B., Cerne, L., Tomšic, B., and Orel, B. (2008). "Surface properties of cellulose modified by imidazolidinone, "Cellulose 15(1), 47-58. DOI: 10.1007/s10570-007-9151-y
330. Sinn, G., Gindl, M., Reiterer, A., and Stanzl-Tschegg, S. (2004). "Changes in the surface properties of wood due to sanding, "Holzforschung 58, 246-251. DOI: 10.1515/HF.2004.038.
331. Sinn, G., Sandak, J., and Ramananantoandro, T. (2009). "Properties of wood surfaces-characterisation and measurement. A review COST Action E35 2004-2008: Wood machining-micromechanics and fracture, "Holzforschung 63(2), 196-203. DOI: 10.1515/HF.2009.016.
332. Song, J., and Rojas, O. J. (2013). "Approaching super-hydrophobicity from cellulosic materials: A review, "Nordic Pulp Paper Res. J. 28(2), 216-238. DOI: 10.3183/NPPRJ-2013-28-02-p216-238.
333. Sorz, J., and Hietz, P. (2006). "Gas diffusion through wood: Implications for oxygen supply, "Trees-Structure and Function 20(1), 34-41. DOI: 10.1007/s00468-005-0010-x
334. Soumya, E. A., Mohamed, M., Fatimazahra, B., Hassann, L., Abellah, H., Fatima, H., and Saad, I. K. (2011). "Study of microbial adhesion on some wood species: Theoretical prediction, "Microbiol. 80(1), 43-49. DOI: 10.1134/S0026261711010152.
335. Sousa, S. C. L., Mendes, A. D., Fiadeiro, P. T., and Ramos, A. M. M. (2014). "Dynamic interactions of pigment-based inks on chemically modified papers and their influence on inkjet print quality, "Indust. Eng. Chem. Res. 53(12), 4660-4668. DOI: 10.1021/ie403595f
336. Stefanis, E., Constantinou, L., Tsivintzelis, I., and Panayiotou, C. (2005). "New groupcontribution method for predicting temperature-dependent properties of pure organic compounds, "Intl. J. Thermophys. 26(5), 1369-1388. DOI: 10.1007/s10765-005-8092-7.
337. Stehr, M., Gardner, D. J., and Wålinder, M. E. P. (2001). "Dynamic wettability of different machined wood surfaces, "J. Adhes. 76(3), 185-200. DOI: 10.1080/00218460108029625.
338. Stockmayer, W. H. (1941). "Second virial coefficients of polar gases, "J. Chem. Phys. 9(5), 398-402. DOI: 10.1063/1.1750922.
339. Stone, J. E., and Scallan, A. M. (1966). "Influence of drying on the pore structures of the cell wall, "in: Consolidation of the Paper Web, Transactions of the symposium held at Cambridge, Sept. 1965, Bolam, F. (ed.), Tech. Section British Paper and Board Makers' Assoc., London.
340. Stone, J. E., and Scallan, A. M. (1968a). "A structural model of the cell wall of waterswollen wood pulp fibres based on their accessibility to macromolecules, "Cellulose Chem. Technol. 2(3), 343-358.
341. Stone, J. E., and Scallan, A. M. (1968b). "The effect of component removal upon the porous structure of the cell wall of wood. Part III. A comparison between the sulphite and kraft processes, "Pulp Paper Mag. Canada 69(6), 69-74.
342. Sun, B., Hou, Q. X., Liu, Z. H., He, Z. B., and Ni, Y. H. (2014). "Stability and efficiency improvement of ASA in internal sizing of cellulosic paper by using cationically modified cellulose nanocrystals, "Cellulose 21(4), 2879-2887. DOI: 10.1007/s10570-014-0283-6.
343. Sun, C., and Berg, J. C. (2003). "A review of the different techniques for solid surface acid-base characterization, "Advan. Colloid Interface Sci. 105, 151-175. DOI: 10.1016/S0001-8686(03)00066-6.
344. Swanson, J. W., and Cordingly, S. (1959). "Surface chemical studies of pitch. II. The mechanism of the loss of absorbency and development of self-sizing in papers made from wood pulps, "TAPPI 42(10), 812-819.
345. Sweerman, A. J. W. (1961). "A new approach to the measurement of roughness and porosity of paper, "Tappi 44(7), 172A-174A.
346. Tai, N., and Yamauchi, T. (2013). "An examination of various evaluation tests for paper sizing-A proposal to use the Klemm test for sizing evaluation, "Sen'i Gakkaishi 69(5), 96-99. DOI: 10.2115/fiber.69.96.
347. Takenaga, M., Jo, S., Graupe, M., and Lee, T. R. (2008). "Effective van der Waals surface energy of self-assembled monolayer films having systematically varying degrees of molecular fluorination, "J. Colloid Interface Sci. 320(1), 264-267. DOI: 10.1016/j.jcis.2007.12.048.
348. Tamai, Y., and Aratani, K. (1972). "Experimental study of relation between contact angle and surface roughness, "J. Phys. Chem. 76(22), 3267-3271. DOI: 10.1021/j100666a026.
349. Tampa, J. D., and Triplett, B. A. (1993). "Analysis of cell-wall polymers during cotton fiber development, "Planta 189(1), 101-108. DOI: 10.1007/bf00201350.
350. Tang, L. J., Zhang, R., Zhou, X. Y., Pan, M. Z., Chen, M. Z., Yang, X. H., Zhou, P., and Chen, Z. (2012). "Dynamic adhesive wettability of poplar veneer with cold oxygen plasma treatment, "BioResources 7(3), 3327-3339.
351. TAPPI T441 om-90 (1990). "Water absorptiveness of sized (non-bibulous) paper and paperboard (Cobb test), "TAPPI Test Methods, TAPPI Press, Atlanta.
352. TAPPI T458 om-89 (1989a). "Surface wettability of paper and paperboard (angle-ofcontact method), "TAPPI Test Methods, TAPPI Press, Atlanta.
353. TAPPI T 530 pm-89 (1989b). "Size test for paper by ink resistance (Hercules method), "TAPPI Test Methods, TAPPI Press, Atlanta.
354. Tate, M. L., Kamath, Y. K., Wesson, S. P., and Ruetsch, S. B. (1996). "Surface energetics of nylon 66 fibers, "J. Colloid Interface Sci. 177(2), 579-588. DOI: 10.1006/jcis.1996.0072.
355. Tavana, H., Amirfazli, A., and Neumann, A. W. (2006). "Fabrication of superhydrophobic surfaces of n-hexatriacontane, "Langmuir 22(13), 5556-5559. DOI: 10.1021/la0607757.
356. Taylor, A. M., Gartner, B. L., and Morrell, J. J. (2002). "Heartwood formation and natural durability-A review, "Wood Fiber Sci. 34(4), 587-611.
357. Thomas, R. R. (2004). "Wetting kinetics of modified polyimide surfaces: Interactions with polar solvents, "J. Colloid Interface Sci. 279(2), 515-522. DOI: 10.1016/j.jcis.2004.06.100.
358. Toussaint, A. F., and Luner, P. (1993). "The wetting properties of grafted cellulose films, "J. Adhes. Sci. Technol. 7(6), 635-648. DOI: 10.1163/156856193X00880.
359. Troncoso, A. B., and Acosta, E. (2015). "Van der Waals free energy model for solubilization of oil in micelles, "Soft Matter 11(3), 516-531. DOI: 10.1039/c4sm02197e
360. Tze, W. T., and Gardner, D. J. (2001a). "Contact angle and IGC measurements for probing surface-chemical changes in the recycling of wood pulp fibers, "J. Adhes. Sci. Technol. 15(2), 223-241. DOI: 10.1163/156856101743427.
361. Tze, W. T., and Gardner, D. J. (2001b). "Swelling of recycled wood pulp fibers: Effect on hydroxyl availability and surface chemistry, "Wood and Fiber Science 33(3), 364-376.
362. Tze, W. T. Y., Wålinder, M. E. P., and Gardner, D. J. (2006). "Inverse gas chromatography for studying interaction of materials used for cellulose fiber/polymer composites, "J. Adhes. Sci. Technol. 20(8), 743-759. DOI: 10.1163/156856106777638644.
363. Unsal, O., Candan, Z., and Korkut, S. (2011). "Wettability and roughness characteristics of modified wood boards using a hot-press, "Indus. Crops Prod. 34(3), 1455-1457. DOI: 10.1016/j.indcrop.2011.04.024.
364. Uyama, Y., Inoue, H., Ito, K., Kishida, A., and Ikada, Y. (1991). "Comparison of different methods for contact angle measurement, "J. Colloid Interface Sci. 141(1), 275-279. DOI: 10.1016/0021-9797(91)90322-Y
365. van de Ven, T. G. M. (1984). "The surface tension of solids, "J. Colloid Interface Sci. 102(1), 301-302. DOI: 10.1016/0021-9797(84)90225-X
366. van de Ven, T. G. M., Smith, P. G., Cox, R. G., and Mason, S. G. (1983). "The surface tension of solids, "J. Colloid Interface Sci. 91, 298-299. DOI: 10.1016/0021-9797(83)90340-5.
367. van der Heide, P. (2011). X-Ray Photoelectron Spectroscopy: An Introduction to Principles and Practices, Wiley and Sons, Hoboken, NJ. DOI: 10.1002/9781118162897.
368. van der Waals, J. D. (1873). "Over de Continuiteit van den Gas-en Vloeistoftoestand, "Thesis, Leiden.
369. van Hazendonk, J. M., van der Putten, J. C., Keurentjes, J. T. F., and Prins, A. (1993). "A simple experimental method for the measurement of the surface tension of cellulosic fibers and its relation with chemical composition, "Colloids Surf. A 81, 251-261. DOI: 10.1016/0927-7757(93)80252-A
370. van Oss, C. J., Chaudhury, M. K., and Good, R. J. (1987). "Monopolar surfaces, "Adv. Colloid Interface Sci. 28(1), 35-64. DOI: 10.1016/0001-8686(87)80008-8.
371. van Oss, C. J., Chaudhury, M. K., and Good, R. J. (1988a). "Interfacial Lifshitz-van der Waals and polar interactions in macroscopic systems, "Chem. Rev. 88(6), 927-941. DOI: 10.1021/cr00088a006.
372. van Oss, C. J., Giese, R. F., and Wu, W. (1997). "On the predominant electron-donicity of polar solid surfaces, "J. Adhes. 63, 71-88. DOI: 10.1080/00218469708015214.
373. van Oss, C. J., Good, R. J., and Chaudhury, M. K. (1988b). "Additive and nonadditive surface tension components and the interpretation of contact angles, "Langmuir 4(4), 884-891. DOI: 10.1021/la00082a018.
374. van Oss, C. J., Wu, W., Docoslis, A., and Giese, R. F. (2001). "Interfacial tensions with water and the Lewis acid-base surface tension parameters of polar organic liquids derived from their aqueous solubilities, "Colloids Surf. B-Biointerfaces 20(1), 87-91. DOI: 10.1016/S0927-7765(00)00169-7.
375. Vassilev, S. V., Baxter, D., Andersen, L. K., Vassileva, C. G., and Morgan, T. J. (2012). "An overview of the organic and inorganic phase composition of biomass, "Fuel 94(1), 1-33. DOI: 10.1016/j.fuel.2011.09.030.
376. Vaz, S. Jr. (2014). "Analytical techniques for the chemical analysis of plant biomass and biomass products, "Analytical Methods 6(20), 8094-8105. DOI: 10.1039/c4ay00388h
377. Villar, J. C., Revilla, E., Gomez, N., Carbajo, J. M., and Simon, J. L. (2009). "Improving the use of kenaf for kraft pulping by using mixtures of bast and core fibers, "Indust. Crops Prod. 29(2-3), 301-307. DOI: 10.1016/j.indcrop.2008.06.002.
378. Visser, J. (1972). "On Hamaker constants: A comparison between Hamaker constants and Lifshitz-van der Waals constants, "Advan. Colloid Interface Sci. 3, 331-363. DOI: 10.1016/0001-8686(72)85001-2.
379. von Bahr, M., Seppanen, R., Tiberg, F., and Zhmud, B. (2004). "Dynamic wetting of AKD-sized papers, "J. Pulp Paper Sci. 20(3), 74-81.
380. Vogler, E. A. (1998). "Structure and reactivity of water at biomaterial surfaces, "Adv. Colloid. Interface. Sci. 74, 69-117. DOI: 10.1016/S0001-8686(97)00040-7.
381. Wågberg, L., Ödberg, L., and Glad-Nordmark, G. (1989). "Charge determination of porous substrates by polyelectrolyte adsorption. Part 1. Carboxymethylated, bleached cellulosic fibers, "Nordic Pulp Paper Res. J. 4(2), 71-76.
382. Wålinder, M. E. P. (2002). "Study of Lewis acid-base properties of wood by contact angle analysis, "Holzforschung 56(4), 363-371. DOI: 10.1515/HF.2002.058.
383. Wålinder, M. E. P, and Gardner, D. J. (1999). "Factors influencing contact angle measurements on wood particles by column wicking, "J. Adhesion Sci. Technol. 13(12), 1363-1374. DOI: 10.1163/156856199X00523.
384. Wålinder, M. E. P, and Gardner, D. J. (2000). "Surface energy of extracted and nonextracted Norway spruce wood particles studied by inverse gas chromatography (IGC), "Wood Fiber Sci. 32(4), 478-488.
385. Wålinder, M. E. P, and Gardner, D. J. (2002a). "Acid-base characterization of wood and selected thermoplastics, "J. Adhes. Sci. Technol. 16(12), 1625-1649. DOI: 10.1163/15685610260255251.
386. Wålinder, M. E. P, and Gardner, D. J. (2002b). "Factors influencing the determination of wood contact angles and wettability-Extractives contamination, wicking, and bulk sorption effects, "in: Contact Angle, Wettability and Adhesion, Vol. 2, Mittal, K. L. (ed.), 2nd Intl. Symp. Contact Angle, Wettability and Adhesion, Newark, NJ.
387. Wålinder, M. E. P., and Johansson, I. (2001). "Measurement of wood wettability by the Wilhelmy method. Part I. Contamination of probe liquids by extractives, "Holzforschung 55, 21-32. DOI: 10.1515/HFSG.2001.21.
388. Wålinder, M. E. P., and Ström, G. (2001). "Measurement of wood wettability by the Wilhelmy method. Part 2. Determination of apparent contact angles, "Holzforschung 55, 33-41. DOI: 10.1515/HFSG.2001.33.
389. Wang, C. Y., and Piao, C. (2011). "From hydrophilicity to hydrophobicity: A critical review-Part II: Hydrophobic conversion, "Wood Fiber Sci. 43(1), 41-56.
390. Wang, D., Peng, L. M., Zhu, G. Y., Fu, F., Zhou, Y. D., and Song, B. Q. (2014a). "Improving the sound absorption capacity of wood by microwave treatment, "BioResources 9(4), 7504-7518. DOI: 10.15376/biores.9.4.7504-7518.
391. Wang, S. Q., Zhang, Y., and Xing, C. (2007). "Effect of drying method on the surface wettability of wood strands, "Holz Roh-Werkstoff65(6), 437-442. DOI: 10.1007/s00107-007-0191-7.
392. Wang, X. S., Cui, S. W., Zhou, L., Xu, S. H., Sun, Z. W., and Zhu, R. Z. (2014b). "A generalized Young's equation for contact angles of droplets on homogeneous and rough substrates, "J. Adhes. Sci. Technol. 28(2), 161-170. DOI: 10.1080/01694243.2013.833401.
393. Ward, C. A., and Neumann, A. W. (1974). "On the surface thermodynamics of a twocomponent liquid-vapor ideal solid system, "J. Colloid Interface Sci. 49(2), 286-290. DOI: 10.1016/0021-9797(74)90364-6.
394. Washburn, E. W. (1921). "The dynamics of capillary flow, "Physics Review 17(3), 273-283. DOI: 10.1103/PhysRev.17.273.
395. Wellons, J. D. (1980). "Wettability and gluability of Douglas-fir veneer, "Forest Prod. J. 30(7), 53-55.
396. Wenzel, R. N. (1936). "Resistance of solid surfaces to wetting by water, "Indust. Eng. Chem. 28(8), 988-994. DOI: 10.1021/ie50320a024.
397. Wenzel, R. N. (1949). "Surface roughness and contact angle, "J. Phys. Colloid Chem. 53(9), 1466-1467. DOI: 10.1021/j150474a015.
398. Whang, H. S., and Gupta, B. S. (2000). "Surface wetting characteristics of cellulosic fibers, "Textile Res. J. 70(4), 351-358. DOI: 10.1177/004051750007000412.
399. White, L. R. (1977). "On deviations form Young's equation, "J. Chem. Soc. Faraday Trans. I 73, 390-398. DOI: 10.1039/f19777300390.
400. Whyman, G., and Bormashenko, E. (2011). "How to make the Cassie wetting state stable?" Langmuir 27, 8171-8176. DOI: 10.1021/la2011869.
401. Wilhelmy, L. (1863). "Ueber die Abhängigkeit der Capillaritäts-Constants des Alkohols von Substanz und Gestalt des benetzten festen Körpers, "Annal. Phys. Chem. 119, 179-217.
402. Williams, D. R. (1994). "Inverse gas chromatography, "in: Characterization of Composite Materials, Ishida, H. (ed.), Butterworth-Heinemann, London, pp. 80-104. DOI: 10.1016/b978-0-7506-9386-8.50012-5.
403. Winfield, P. H., Harris, A. F., and Hutchinson, A. R. (2001). "The use of flame ionization technology to improve the wettability and adhesion properties of wood, "Int. J. Adhesion Adhesives 21(2), 107-114. DOI: 10.1016/S0143-7496(00)00040-3.
404. Wistara, N., Zhang, X. J., and Young, R. A. (1999). "Properties and treatments of pulps from recycled paper. Part II. Surface properties and crystallinity of fibers and fines, "Cellulose 6(4), 325-348. DOI: 10.1023/A:1009255808215.
405. Wolkenhauer, A., Avramidis, G., Militz, H., and Viöl, W. (2008). "Plasma treatment of heat treated beech wood-Investigation on surface free energy, "Holzforschung 62(4), 472-474. DOI: 10.1515/HF.2008.074.
406. Wu, N. J., Tang, Q. L., Shen, Y., Lee, M. L. (1999). "Porous and nonporous particles in packed capillary column solvating gas chromatography, "Anal. Chem. 71(22), 5084-5092. DOI: 10.1021/ac990650p
407. Wu, S. (1971). "Calculation of interfacial tension in polymer systems, "J. Polym. Sci., Part C 34, 19-30. DOI: 10.1002/polc.5070340105.
408. Wu, S. (1982). Polymer Interface and Adhesion, Marcel Dekker, Inc., New York, 1982.
409. Wu, W., Giese, R. F., and van Oss, C. J. (1995). "Evaluation of the Lifshitz-van der Waals/acid-base approach to determine surface tension components, "Langmuir 11(1), 379-382. DOI: 10.1021/la00001a064.
410. Xu, F., Shi, Y. C., and Wang, D. H. (2013). "X-ray scattering studies of lignocellulosic biomass: A review, "Carbohyd. Polym. 94(2), 904-917. DOI: 10.1016/j.carbpol.2013.02.008.
411. Yamane, C., Aoyagi, T., Ago, M., Sato, K., Okajima, K., and Takahashi, T. (2006). "Two different surface properties of regenerated cellulose due to structural anisotropy, "Polymer J. 38(8), 819-826. DOI: 10.1295/polymj. PJ2005187.
412. Yamauchi, T., and Murakami, K. (2002). "Porosity and gas permeability, "in: Handbook of Physical Testing of Paper, Vol 2, Borch, J., Lyne, M. B., Marks, R. E., and Haberger, C. C. (eds.), Dekker, New York.
413. Yamazaki, H., and Munakata, Y. (1993). "Liquid absorption model, "in: Products of Papermaking, Baker, C. F. (ed.), pp. 913-934.
414. Young, R. A. (1976). "Wettability of wood pulp fibers-Applicability of methodology, "Wood Fiber 8(2), 120-128.
415. Young, T. (1805). "An essay on the cohesion of fluids, "Phil. Trans. Royal Soc. London 95, 65-87. DOI: 10.1098/rstl.1805.0005.
416. Yuan, L. T., Wan, J. Q., Ma, Y. W., Wang, Y., Huang, M. Z., and Chen, Y. M. (2013). "The content of different hydrogen bond models and crystal structure of eucalyptus fibers during beating, "BioResources 8(1), 717-734.
417. Zhang, J. X., Ebbens, S., Chen, X. Y., Jin, Z., Luk, S., Madden, C., Patel, N., and Roberts, C. J. (2006). "Determination of the surface free energy of crystalline and amorphous lactose by atomic force microscopy adhesion measurement, "Pharm. Res. 23(2), 401-407. DOI: 10.1007/s11095-005-9144-1.
418. Zhang, P. C., Wang, S. S., Wang, S. T., and Jiang, L. (2015). "Superwetting surfaces under different media: Effects of surface topography on wettability, "Small 11(16), 1939-1946. DOI: 10.1002/smll.201401869.
419. Zhou, Z. L., Shi, D. J., Qiu, Y. P., and Sheng, G. D. (2010). "Sorptive domains of pine chars as probed by benzene and nitrobenzene, "Environ. Pollut. 158(1), 201-206. DOI: 10.1016/j.envpol.2009.07.020.
420. Zhu, R. Z., Cui, S. W., and Wang, X. S. (2010). "Theoretical foundation of Zisman's empirical equation for wetting of liquids on solid surfaces, "Eur. J. Phys. 31(2), 251-256. DOI: 10.1088/0143-0807/31/2/001.