The Influence of Hot Compression on the Surface Characteristics of Poplar Veneer

BioResources

Volumn 9, Issue 2, 2014, Pages 2808-2823

  Li, Wending ^a   Wang, Chao ^a   Zhang, Yang ^a   Jia, Chong ^a   Gao, Chenchao ^a   Jin, Juwan ^a  

^a NANJING FORESTRY UNIVERSITY   (China)

Author keywords

Contact angle; Hot compression; Surface free energy; Surface roughness; Veneer; X ray photoelectron spectrometer (XPS)

Indexed keywords

CARBON; FREE ENERGY; LAMINATED COMPOSITES; PHASE INTERFACES; PLYWOOD; VENEERS; X RAY PHOTOELECTRON SPECTROSCOPY;

BONDING ABILITY; CARBON ATOMS; INTERFACIAL CONTACT; LAMINATED VENEER LUMBER; SURFACE CHARACTERISTICS; SURFACE ELEMENTS; SURFACE FREE ENERGY; WOOD VENEER;

SURFACE ROUGHNESS;

CARBON; COMPRESSION; ESCA; FREE ENERGY; POPULUS; ROUGHNESS; SURFACES; VENEERS; X RAY SPECTROSCOPY;

EID: 84983666392     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.9.2.2808-2823     Document Type: Article

References (64)

1. Anshari, B., Guan, Z. W., Kitamori, A., Jung, K., Hassel, I., and Komatsu, K. (2011). “Mechanical and moisture-dependent swelling properties of compressed Japanese cedar,” Constr. Build. Mater. 25(4), 1718-1725.
2. Avila, C. B., Escobar, W. G., Cloutier, A., Fang, C., and Carrasco, P. V. (2012). “Densification of wood veneers combined with oil-heat treatment. Part III: Cell wall mechanical properties determined by nanoindentation,” BioResources 7(2), 19302126.
3. Ayrilmis, N., Dundar, T., Candan, Z., and Akbulut, T. (2009). “Wettability of fire retardant treated laminated veneer lumber (LVL) manufactured from veneers dried at different temperatures,” BioResources 4(4), 1536-1544.
4. B46.1 (2002). Surface Texture, Surface Roughness, Waviness and Lay, American Society of Mechanical Engineers, New York, USA.
5. Bao, F., and Liu, S. (2001). “Modeling the relationships between wood properties and quality of veneer and plywood of Chinese plantation poplars,” Wood Fiber Sci. 33(2), 264-274.
6. Bekhta, P., Hiziroglu, S., and Shepelyuk, O. (2009). “Properties of plywood manufactured from compressed veneer as building material,” Mater. Design 30(4), 947-953.
7. Bekhta, P., Niemz, P., and Sedliacik, J. (2012). “Effect of pre-pressing of veneer on the glueability and properties of veneer-based products,” Eur. J. Wood Prod. 70(1-3), 99-106.
8. Büyüksari, Ü. (2013). “Surface characteristics and hardness of MDF panels laminated with thermally compressed veneer,” Compos. Part B-Eng. 44(1), 675-678.
9. Cai, J., Yang, X., Cai, L., and Shi, S. Q. (2013). “Impact of the combination of densification and thermal modification on dimensional stability and hardness of poplar lumber,” Dry. Technol. 31(10), 1107-1113.
10. Candan, Z., Hiziroglu, S., and McDonald, A. G. (2010). “Surface quality of thermally compressed Douglas fir veneer,” Mater. Design 31(7), 3574-3577.
11. Cern, L., Simoncic, B., and Zeljkob, M. (2008). “The influence of repellent coatings on surface free energy of glass plate and cotton fabric,” Appl. Surf. Sci. 254(20), 64676477.
12. Diouf, P. N., Stevanovic, T., Cloutier, A., and Fang, C. (2011). “Effects of thermo-hygro-mechanical densification on the surface characteristics of trembling aspen and hybrid poplar wood veneers,” Appl. Surf. Sci. 257(8), 3558-3564.
13. Fang, C., Cloutier, A., Blanchet, P., Koubaa, A., and Mariotti, N. (2011). “Densification of wood veneers combined with oil-heat treatment. Part I: Dimensional stability,” BioResources 6(1), 373-385.
14. Fang, C., Cloutier, A., Blanchet, P., and Koubaa, A. (2012a). “Densification of wood veneers combined with oil-heat treatment. Part II: Hygroscopicity and mechanical properties,” BioResources 7(1), 925-935.
15. Fang, C., Mariotti, N., Cloutier, A., Koubaa, A., and Blanchet, P. (2012b). “Densification of wood veneers by compression combined with heat and steam,” Eur. J. Wood Prod. 70(1-3), 155-163.
16. Gardner, D. J. (1996). “Application of the Lifshitz-van der Waals acid-base approach to determine wood surface tension components,” Wood Fiber Sci. 28(4), 422-428.
17. Gindl, M., Sinn, G., and Gindl, W. (2001). “A comparison of different methods to calculate the surface free energy of wood using contact angle measurements,” Colloid. Surface. A 181(1), 279 -287.
18. Gong, M., Lamason, C., and Li, L. (2010). “Interactive effect of surface densification and post-heat-treatment on aspen wood,” J. Mater. Process. Tech. 210(2), 293-296.
19. Good, R. J. (1992). “Contact angle, wetting, and adhesion: A critical review,” J. Adhes. Sci. Technol. 6(12), 1269-1302.
20. Hakkou, M., Pétrissans, M., Zoulalian, A., and Gérardin, P. (2005). “Investigation of wood wettability changes during heat treatment on the basis of chemical analysis,” Polym. Degrad. Stabil. 89(1), 1-5.
21. Haygreen, J. G., and Daniels, D. H. (1969). “The simultaneous drying and densification of sapwood,” Wood Fiber Sci. 1(1), 38-53.
22. Heräjärvi, H. (2009). “Effect of drying technology on aspen wood properties,” Silva Fenn. 43(3), 433-445.
23. Imirzi, H. Ö., Ülker, O., and Burdurlu, E. (2014). “Effect of densification temperature and some surfacing technique on the surface roughness of densified Scots pine (Pinus sylvestris L.),” BioResources 9(1), 191-209.
24. Inari, G. N., Petrissans, M., Lambert, J., Ehrhardt, J. J., and Gerardin, P. (2006). “XPS characterization of wood chemical composition after heat-treatment,” Surf. Interface Anal. 38(10), 1336-1342.
25. Jiang, L., Zhao, Y., and Zhai, J. (2004). “A lotus-leaf-like superhydrophobic surface: A porous microsphere/nanofiber composite film prepared by electrohydrodynamics,” Angew. Chem. Int. Edit. 43(33), 4338-4340.
26. Kutnar, A. and Kamke, F. A. (2012). “Compression of wood under saturated steam, superheated steam, and transient conditions at 150 °C, 160 °C, and 170 °C,” Wood Sci. Technol. 46(1-3), 73-88.
27. Kutnar, A., Kamke, F. A., Petrie, M., and Sernek, M. (2008). “The influence of viscoelastic thermal compression on the chemistry and surface energetics of wood,” Colloid. Surface. A 329(1-2), 82-86.
28. Kutnar, A., Kamke, F. A., and Sernek, M. (2009). “Density profile and morphology of viscoelastic thermal compressed wood,” Wood Sci. Technol. 43(1-2), 57-68.
29. Kwok, D. Y., Li, D., and Neumann, A. W. (1994). “Evaluation of the Lifshitz-van der Waals/acid-base approach to determine interfacial tensions,” Langmuir 10(4), 13231328.
30. Li, W., Zhang, Y., Ruan, Z., and Liu, Y. (2010). “Influence of veneer compression and resin impregnation on the properties of poplar plywood,” China Forest Prod. Ind. 37(6), 10-13.
31. Ma, D., Johns, W. E., Dunker, A. K., and Bayoumi, A. E. (1990). “The effect of donoracceptor interactions on the mechanical properties of wood,” J. Adhes. Sci. Technol. 4(1), 411-429.
32. Mahadik, D. B., Rao, A. V., Parale, V. G., Kavale, M. S., Wagh, P. B., Ingale, S. V., and Gupta, S. V. (2011). “Effect of surface composition and roughness on the apparent surface free energy of silica aerogel materials,” Appl. Phys. Lett. 99(10), 104104.
33. McConnell, T. E., and Shi, S. Q. (2011). “Surface energy characterization of three partially hydrolyzed hardwood species determined by dynamic contact angle analysi s,” J. Adhesion 87(4), 353-365.
34. Miller, J. D., Veeramasuneni, S., Drelich, J., Yalamanchili, M. R., and Yamauchi, G. (1996). “Effect of roughness as determined by atomic force microscopy on the wetting properties of PTFE thin films,” Polym. Eng. Sci. 36(14), 1849-1855.
35. Mohammed-Ziegler, I., Oszlanczi, A., Somfai, B., and Horvölgyi, Z. (2004). “Surface free energy of natural and surface-modified tropical and European wood species,” J. Adhes. Sci. Technol. 18(6), 687-713.
36. Mohan, T., Kargl, R., Doliska, A., Vesel, A., Köstler, S., Ribitsch, V., and Stana-Kleinschek, K. (2011). “Wettability and surface composition of partly and fully regenerated cellulose thin films from trimethylsilyl cellulose,” J. Colloid Interf. Sci. 358(2), 604-610.
37. Ostrovskaya, L., Podesta, A., Milani, P., and Ralchenko, V. (2003). “Influence of surface morphology on the wettability of cluster-assembled carbon films,” Euro. Phys. Lett. 63(3), 401-407.
38. Owens, D. K., and Wendt, R. C. (1969). “Estimation of the surface free energy of polymers,” J. Appl. Polym. Sci. 13(8), 1741-1747.
39. Plötze, M., and Niemz, P. (2011). “Porosity and pore size distribution of different wood types as determined by mercury intrusion porosimetry,” Eur. J. Wood Prod. 69(4), 649-657.
40. Poncsak, S., Kocaefe, D., Simard, F., and Pichette, A. (2009). “Evolution of extractive composition during thermal treatment of Jack pine,” J. Wood Chem. Technol. 29(3), 251-264.
41. Rautkari, L., Properzi, M., Pichelin, F., and Hughes, M. (2010). “Properties and setrecovery of surface densified Norway spruce and European beech,” Wood Sci. Technol. 44(4), 679-691.
42. Rossi, D., Rossi, S. Morin, H., and Bettero, A. (2012). “Within-tree variations in the surface free energy of wood assessed by contact angle analysis,” Wood Sci. Technol. 46(1-3), 287-298.
43. Rudawska, A., and Jacniaka, E. (2009). “Analysis for determining surface free energy uncertainty by the Owen-Wendt method,” Int. J. Adhes. 29(4), 451-457.
44. Selvakumar, N., Barshilia, H. C., and Rajam, K. S. (2010). “Effect of substrate roughness on the apparent surface free energy of sputter deposited superhydrophobic polytetrafluorethylene coatings: A comparison of experimental data with different theoretical models,” J. Appl. Phys. 108(1), 013505.
45. Sernek, M. (2002). “Comparative analysis of inactivated wood surfaces,” Ph.D. Thesis, Virginia Polytechnic Institute and State University, USA.
46. Shen, Q., Nylund, J. and Rosenholm, J. B. (1998). “Estimation of the surface energy and acid-base properties of wood by means of wetting method,” Holzforschung 52(5), 521-529.
47. Shen, W., Sheng, Y. J., and Parker, I. H. (1999). “Comparison of the surface energetics data of eucalypt fibers and some polymers obtained by contact angle and inverse gas chromatography methods,” J. Adhes. Sci. Technol. 13(8), 887-901.
48. Shi, S. Q., and Gardner D. J. (2001). “Dynamic adhesive wettability of wood,” Wood Fiber Sci. 33(1), 58-68.
49. Spori, D. M., Drobek, T., Zürcher, S., Ochsner, M., Sprecher, C., Mühlebach, A., and Spencer, N. D. (2008). “Beyond the lotus effect: Roughness influences on wetting over a wide surface-energy range,” Langmuir 24(10), 5411-5417.
50. Tjeerdsma, B. F., and Militz, H. (2005). “Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood,” Holz. Roh. Werkst. 63(2), 101-111.
51. Van Oss, C. J., Chaudhury, M. K., and Good, R. J. (1987). “Monopolar surfaces,” Adv. Colloid Interf. Sci. 28(1), 35-64.
52. Van Oss, C. J., and Giese, R. F. (1995). “The hydrophilicity and hydrophobicity of clay minerals,” Clay. Clay. Miner. 43(4), 474-477.
53. Van Oss, C. J., Giese, R. F., Li, Z., Murphy, K., Norris, J., Chaudhury, M. K., and Good, R. J. (1992). “Determination of contact angles and pore sizes of porous media by column and thin layer wicking,” J. Adhes. Sci. Technol. 6(4), 413-428.
54. Walinder, M. E. P. (2002). “Study of Lewis acid-base properties of wood by contact angle analysis,” Holzforschung 56(4), 363-371.
55. Wålinder, M. E. P., and Ström, G. (2001). “Measurement of wood wettability by the Wilhelmy method. Part 2. Determination of apparent contact angles,” Holzforschung 55(1), 33-41.
56. Wang, B. J., Ellis, S., and Dai, C. (2006a). “Veneer surface roughness and compressibility pertaining to plywood/LVL manufacturing. Part II. Optimum panel densification,” Wood Fiber Sci. 38(4), 727-735.
57. Wang, S., Zhu, Y., Xia, F., Xi, J., Wang, N., Feng, L., and Jiang, L. (2006b). “The preparation of a superhydrophilic carbon film from a superhydrophobic lotus leaf,” Carbon 44(9), 1848-1850.
58. Wei, P., Wang, B. J., Zhou, D., Dai, C., Wang, Q., and Huang, S. (2013). “Mechanical properties of poplar laminated veneer lumber modified by carbon fiber reinforced polymer,” BioResources 8(4), 4883-4898.
59. Wu, S. (1971). “Calculation of interfacial tension in polymer systems,” J. Polym. Sci. C 34(1), 19-30.
60. Young, R. A., Rammon, R. M., Kelley, S. S., and Gillespie, R. H. (1982). “Bond formation by wood surface reactions: Part I. Surface-analysis by ESCA,” Wood Sci. 14(3), 110-119.
61. Young, T. (1805). “An essay on the cohesion of fluids,” Philosophical Transactions of the Royal Society of London 95, 65-87.
62. Zenkiewicz, M. (2007). “Comparative study on the surface free energy of a solid calculated by different methods,” Polym. Test. 26(1), 14-19.
63. Zhang, Y., Wang, S., Hosseinaei, O., and Zhou, Z. (2012). “Effects of compressive deformation on wettability and water uptake behavior of poplar,” Forest Prod. J. 62(6), 450-455.
64. Zisman, W. A. (1963). “Influence of constitution on adhesion,” Ind. Eng. Chem. 55(10), 18-38.