Proposed nano-scale coalescence of cellulose in chemical pulp fibers during technical treatments

BioResources

Volumn 7, Issue 4, 2012, Pages 6077-6108

  Pönni, Raili ^a   Vuorinen, Tapani ^a   Kontturi, Eero ^a  

^a AALTO UNIVERSITY   (Finland)

Author keywords

Aggregation; Cellulose; Chemical pulp; Coalescence; Hornification; Microfibril; Swelling

Indexed keywords

AGGLOMERATION; CELLULOSE; CHEMICAL BONDS; COALESCENCE; FOURIER TRANSFORM INFRARED SPECTROSCOPY; HYDROGEN BONDS; NANOTECHNOLOGY; PULP BEATING; SWELLING; TRANSPORTATION;

CELLULOSE ACCESSIBILITIES; CELLULOSE MICROFIBRILS; COALESCENCE MECHANISMS; HORNIFICATION; INDUSTRIAL PROCESSS; MICROFIBRIL; PAPER-BASED PRODUCTS; WATER RETENTION VALUE;

CHEMICAL PULP;

EID: 84872809458     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.7.4.6077-6108     Document Type: Review

References (165)

1. Aarne, N., Kontturi, E., and Laine, J. (2012). "Influence of adsorbed polyelectrolytes on pore size distribution of a water-swollen biomaterial," Soft Matter 8(17), 4740-4749.
2. Abe, K., Iwamoto, S., and Yano, H. (2007). "Obtaining cellulose nanofibers with a uniform width of 15 nm from wood," Biomacromolecules 8(10), 3276-3278.
3. Åkerholm, M., and Salmén, L. (2001). "Interactions between wood polymers studied by dynamic FT-IR spectroscopy," Polymer 42(3), 963-969.
4. Alince, B. (2002). "Porosity of swollen pulp fibers revisited," Nord. Pulp Pap. Res. J. 17(1), 71-73.
5. Andersson, S., Wikberg, H., Pesonen, E., Maunu, S. L., and Serimaa, R. (2004). "Studies of crystallinity of Scots pine and Norway spruce cellulose," Trees 18(3), 346-353.
6. Atalla, R. H., and VanderHart, D. L. (1984). "Native cellulose: A composite of two distinct crystalline forms," Science 223(4633), 283-285.
7. Aulin, C., Ahola, S., Josefsson, P., Nishino, T., Hirose, Y., Österberg, M., and Wågberg, L. (2009). "Nanoscale cellulose films with different crystallinities and mesostructures - Their surface properties and interaction with water," Langmuir 25(13), 7675-7685.
8. Awano, T., Takabe, K., Fujita, M., and Daniel, G. (2000). "Deposition of glucuronoxylans on the secondary cell wall of Japanese beech as observed by immuno-scanning electron microscopy," Protoplasma 212(1-2), 72-79.
9. Back, E. L. (1967). "Thermal auto-crosslinking in cellulose material," Pulp Pap. Mag. Can. 68(4), T165-T171.
10. Battista, O. A., Coppick, S., Howsmon, J. A., Morehead, F. F., and Sisson, W. A. (1956). "Level-off degree of polymerization," J. Ind. Eng. Chem. 48(2), 333-335.
11. Berthold, J., and Salmén, L. (1997). "Inverse size exclusion chromatography (ISEC) for determining the relative pore size distribution of wood pulps," Holzforschung 51(4), 361-368.
12. Billosta, V., Brändström, J., Cochaux, A., Joseleau, J.-P., and Ruel, K. (2006). "Ultrastructural organization of the wood cell wall can explain modifications caused in fibers during the pulping process," Cell. Chem. Technol. 40(3-4), 223-229.
13. Borrega, M., and Kärenlampi, P. P. (2008). "Mechanical behavior of heat-treated spruce (Picea abies) wood at constant moisture content and ambient humidity," Holz Roh. Werkst. 66(1), 63-69.
14. Borrega, M., and Kärenlampi, P. P. (2010). "Hygroscopicity of heat-treated Norway spruce (Picea abies) wood," Eur. J. Wood Prod. 68(2), 233-235.
15. Borrega, M., and Kärenlampi, P. P. (2011). "Cell wall porosity in Norway spruce wood as affected by high-temperature drying," Wood. Fiber Sci. 43(2), 206-214.
16. California Department of Conservation (1997). History of Recycling, California.
17. Cao, B., Tschirner, U., and Ramaswamy, S. (1998) "Impact of pulp chemical composition on recycling," Tappi J. 81(12), 119-127.
18. Carlsson, G., and Lindström, T. (1984). "Hornification of cellulosic fibers during wet pressing," Sven. Papperstidn. 87(15), R119-R125.
19. Caulfield, D. F., and Steffes, R. A. (1969). "Water-induced recrystallization of cellulose," Tappi 52(7), 1361-1366.
20. Christiansen, A. W. (1990). "How overdrying wood reduces its bonding to phenol-formaldehyde adhesives: A critical review of the literature. Part I. Physical responses," Wood Fiber Sci. 22(4), 441-459.
21. Chunilall, V., Bush, T., Larsson, P. T., Iversen, T., and Kindness, A. (2010). "A CP/MAS 13C-NMR study of cellulose fibril aggregation in eucalyptus dissolving pulps during drying and the correlation between aggregate dimensions and chemical reactivity," Holzforschung 64(6), 693-698.
22. Dang, Z., Elder, T., Hsieh, J. S., and Ragauskas, A. J. (2007). "Alkaline peroxide treatment of ECF bleached softwood kraft pulps: Part 2. Effect of increased fiber charge on refining, wet-end application, and hornification," Holzforschung 61(4), 451-458.
23. Ding, S.-Y., and Himmel, M. E. (2006). "The maize primary cell wall microfibril: A new model derived from direct visualization," J. Agric. Food Chem. 54(3), 597-606.
24. Donaldson, L. (2007). "Cellulose microfibril aggregates and their size variation with cell wall type," Wood Sci. Technol. 41(5), 443-460.
25. Duchesne, I., Hult, E.-L., Molin, U., Daniel, G., Iversen, T., and Lennholm, H. (2001). "The influence of hemicellulose on fibril aggregation of kraft pulp fibres as revealed by FE-SEM and CP/MAS 13C-NMR," Cellulose 8(2), 103-111.
26. Duchesne, I., Takabe, K., and Daniel, G. (2003). "Ultrastructural localisation of glucomannan in kraft pulp fibres," Holzforschung 57(1), 62-68.
27. Elazzouzi-Haffraoui, S., Nishiyama, Y., Putaux, J.-L., Heux, L., Dubreuil, F., and Rochas, C. (2008). "The shape and size distribution of crystalline nanoparticles prepared by acid hydrolysis of native cellulose," Biomacromolecules 9(1), 57-65.
28. Ellis, J. W., and Bath, J. (1940). "Hydrogen bridging in cellulose as shown by infrared absorption spectra," J. Am. Chem. Soc. 62, 2859-2861.
29. Fahlén, J., and Salmén, L. (2002). "On the lamellar structure of the tracheid cell wall," Plant Biol. 4(3), 339-345.
30. Fahlén, J., and Salmén, L. (2003). "Cross-sectional structure of the secondary wall of wood fibers as affected by processing," J. Mater. Sci. 38(1), 119-126.
31. Fahlén, J., and Salmén, L. (2005). "Pore and matrix distribution in the fiber wall revealed by atomic force microscopy and image analysis," Biomacromolecules 6(1), 433-438.
32. Fahmy, Y., and Mobarak, F. (1971). "On fine structure of cellulose fibers," Sven. Papperstidn. 74(1), 2-9.
33. Fengel, D. (1970). "Ultrastructural behavior of cell wall polysaccharides," Tappi 53(3), 497-503.
34. Fernandes Diniz, J. M. B., Gil, M. H., and Castro, J. A. A. M. (2004). "Hornification - Its origin and interpretation in wood pulps," Wood Sci. Technol. 37(6), 489-494.
35. Fink, H.-P., Hofmann, D., and Purz, H. J. (1990). "Zur Fibrillarstruktur nativer Cellulose," Acta Polym. 41(2), 131-137.
36. Fink, H.-P., and Walenta, E. (1994). "Röntgenbeugungsuntersuchungen zur Übermolekularen Struktur von Cellulose im Verarbeitungsprozeß," Papier 48(12), 739-748.
37. Fors, C. (2000). "The effect of fibre charge on web consolidation in papermaking," Licentiate Thesis, Royal Inst. Technol., Stockholm.
38. French, A. D., and Johnson, G. P. (2009). "Cellulose and the twofold screw axis: Modeling and experimental arguments," Cellulose 16(6), 959-973.
39. Frey-Wyssling, A. (1954). "The fine structure of cellulose microfibrils," Science 119(3081), 80-82.
40. Gallay, W. (1950). "The measurement and significance of swelling of cellulose fibers," Tappi 33(9), 425-429.
41. Gane, P. A. C., Ridgway, C. J., Lehtinen, E., Valiullin, R., Furó, I., Schoelkopf, J., Paulapuro, H., and Daicic, J. (2004). "Comparison of NMR cryoporometry, mercury intrusion porosimetry, and DSC thermoporosimetry in characterizing pore size distributions of compressed finely ground calcium carbonate structures," Ind. Eng. Chem. Res. 43(24), 7920-7927.
42. Gerhards, C. C. (1982). "Effect of moisture content and temperature on the mechanical properties of wood: An analysis of immediate effects," Wood Fiber Sci. 14(1), 4-36.
43. Goring, D. A. I, and Timell, T. E. (1962). "Molecular weight of native celluloses," Tappi 45(6), 454-460.
44. Gross, A. S., and Chu, J.-W. (2010). "On the molecular origin of biomass recalcitrance: The interaction network and solvation structures of cellulose microfibrils," J. Phys. Chem. B 114(42), 13333-13341.
45. Hanspal, N. S., and Das, D. B. (2012). "Dynamic effects on capillary pressure-saturation relationships for two-phase porous flow: implications of temperature," AIChE J. 58(6), 1951-1965.
46. Hearle, J. W. S. (1958). "A fringed fibril theory of structure in crystalline polymers," J. Polym. Sci. XXVIII(117), 432-435.
47. Heyn, A. N. J. (1969). "The elementary fibril and supermolecular structure of cellulose in soft wood fiber," J. Ultrastruct. Res. 26(1), 52-68.
48. Higgins, H. G., and McKenzie, A. W. (1963). "The structure and properties of paper XIV. Effects of drying on cellulose fibres and the problem of maintaining pulp strength," Appita 16(6), 145-164.
49. Hill, S. J., Kirby, N. M., Mudie, S. T., Hawley, A. M., Ingham, B., Franich, R. A., and Newman, R. H. (2010). "Effect of drying and rewetting of wood on cellulose molecular packing," Holzforschung 64(4), 421-427.
50. Hillis, W. E. (1984). "High temperature and chemical effects on wood stability," Wood Sci. Technol. 18(4), 281-293.
51. Hillis, W. E., and Rozsa, A. N. (1985). "High temperature and chemical effects on wood stability," Wood Sci. Technol. 19(2), 93-102.
52. Hofmann, D., Fink, H.-P., and Philipp, B. (1989). "Lateral crystallite size and lattice distortions in cellulose II samples of different origin," Polymer 30(2), 237-241.
53. Hon, D. N.-S., and Shiraishi, N. (1991). Wood and Cellulosic Chemistry, Mercel Dekker, Inc., New York.
54. Howard, R. C. (1990). "The effects of recycling on paper quality," J. Pulp Pap. Sci. 16(5), J143-J149.
55. Howard, R. C. (1991). "The effects of recycling on paper quality," Paper Technol. 32(4), 20-25.
56. Howard, R. C. (1995). "The effects of recycling on pulp quality," Technol. Pap. Recycling 180-203.
57. Hubbe, M. A., Venditti, R. A., and Rojas, O. J. (2007). "What happens to cellulosic fibers during papermaking and recycling? A review," BioResources 2(4), 739-788.
58. Hult, E.-L., Iversen, T., and Sugiyama, J. (2003). "Characterization of the supermolecular structure of cellulose in wood pulp fibres," Cellulose 10(2), 103-110.
59. Hult, E.-L., Larsson, P. T., and Iversen, T. (2001). "Cellulose fibril aggregation - An inherent property of kraft pulps," Polymer 42(8), 3309-3314.
60. Hult, E.-L., Larsson, P. T., and Iversen, T. (2002). "A comparative CP/MAS 13C-NMR study of the supermolecular structure of polysaccharides in sulphite and kraft pulps," Holzforschung 56(2), 179-184.
61. Ishizawa, C. I., Jeoh, T., Adney, W. S., Himmel, M. E., Johnson, D. K., and Davis, M. F. (2009). "Can delignification decrease cellulose digestibility in acid pretreated corn stover?," Cellulose 16(4), 677-686.
62. Isogai, A. (1997). "NMR analysis of cellulose dissolved in aqueous NaOH solutions," Cellulose 4(2), 99-107.
63. Jayme, G. (1944). "Mikro-Quellungsmessungen an Zellstoffen," Wochenbl. Papierfabr. 6, 187-194.
64. Jayme, G. (1958). "Properties of wood celluloses II. Determination and significance of water retention value," Tappi 41(11), 180A-183A.
65. Jayme, G., and Hunger, G. (1957). "The rearrangement of microfibrils in dried cellulose and the implication of this structure alteration on pulp properties," Fundamentals of Papermaking Fibres, Cambridge, 263-270.
66. Johansson, L.-S., Tammelin, T., Campbell, J. M., Setälä, H., and Österberg, M. (2011). "Experimental evidence on medium driven cellulose surface adaption demonstrated using nanofibrillated cellulose," Soft Matter 7(22), 10917-10924.
67. Jones, D. W. (1958). "Crystalline modifications of cellulose. Part III. The derivation and preliminary study of possible crystal structures," J. Polym. Sci. XXXII, 371-394.
68. Kadla, J. F., and Gilbert, R. D. (2000). "Cellulose structure: A review," Cell. Chem. Technol. 34(3-4), 197-216.
69. Kato, K. L., and Cameron, R. E. (1999). "A review of the relationship between thermally-accelerated ageing of paper and hornification," Cellulose 6(1), 23-40.
70. Kato, K. L., and Cameron, R. E. (2002). "Structural aspects of the thermally accelerated ageing of cellulose: Effect of cellulose source and ageing conditions," Polym. Int. 51(8), 707-714.
71. Kerr, A. J., and Goring, D. A. I. (1975). "The ultrastructural arrangement of the wood cell wall," Cell. Chem. Technol. 9, 563-573.
72. Kifetew, G., Thuvander, F., Berglund, L., and Lindberg, H. (1998). "The effect of drying on wood fracture surfaces from specimens loaded in wet condition," Wood Sci. Technol. 32(2), 83-94.
73. Klemm, D., Philipp, B., Heinze, U., and Heinze, W. (1998). Comprehensive Cellulose Chemistry. Vol. 1. Fundamentals and Analytical Methods, Wiley-VCH, Weinheim.
74. Klungness, J. H. (1974). "Recycled fiber properties as affected by contaminants and removal processes," Tappi 57(11), 71-75.
75. Klye, R. C. (1961). "The effect of drying on pulp strengths," Appita 14(6), xxi-xxxv.
76. Kontturi, E., and Vuorinen, T. (2009). "Indirect evidence of supramolecular changes within cellulose microfibrils of chemical pulp fibers upon drying," Cellulose 16(1), 65-74.
77. Kontturi, E., Suchy, M., Penttilä, P., Jean, B., Pirkkalainen, K., Torkkeli, M., and Serimaa, R. (2011). "Amorphous characteristics of an ultrathin cellulose film," Biomacromolecules 12(3), 770-777.
78. Laine, J., Lindström, T., Bremberg, C., and Glad-Nordmark, G. (2003a). "Studies on topochemical modification of cellulosic fibres. Part 4: Toposelectivity of carbomethylation and its effects on the swelling of fibres," Nord. Pulp Pap. Res. J. 18(3), 316-324.
79. Laine, J., Lindström, T., Bremberg, C., and Glad-Nordmark, G. (2003b). "Studies on topochemical modification of cellulosic fibres. Part 5: Comparison of the effects of surface and bulk chemical modification and beating of pulp on paper properties," Nord. Pulp Pap. Res. J. 18(3), 325-332.
80. Laivins, G.V., and Scallan, A.M. (1993). The mechanism of hornification of wood pulps, Products of papermaking, Transactions of the Xth fundamental research symposium, Oxford, 1235-1260.
81. Laivins, G.V., and Scallan, A.M. (1996). "The influence of drying and beating on the swelling of fines," J. Pulp Pap. Sci. 22(5), J178-J184.
82. Laivins, G., and Scallan, T. (2000). "Acidic versus alkaline beating of pulp," J. Pulp Pap. Sci. 26(6), 228-233.
83. Landry, M. R. (2005). "Thermoporometry by differential scanning calorimetry: Experimental considerations and applications," Thermochim. Acta 433(1-2), 27-50.
84. Law, K. N, Song, X. L., and Daneault, C. (2006). "Influence of pulping conditions on the properties of recycled fibers," Cell. Chem. Technol. 40(5), 335-343.
85. Lee, J. M., Heitmann, J. A., and Pawlak, J. J. (2007). "Technique for the measurement of dimensional changes of natural microfibril materials under variable humidity environments," Mater. Sci. Eng. A 445-446, 632-640.
86. Lehtiö, J., Sugiyama, J., Gustavsson, M., Fransson, L., Linder, M., and Teeri, T. T. (2003). "The binding specificity and affinity determinants of family 1 and family 3 cellulose binding modules," P. Natl. Acad. Sci. USA 100(2), 484-489.
87. Le Moigne, N., and Navard, P. (2010). "Dissolution mechanisms of wood cellulose fibres in NaOH-water," Cellulose 17(1), 31-45.
88. Leppänen, K., Andersson, S., Torkkeli, M., Knaapila, M., Kotelnikova, N., and Serimaa, R. (2009). "Structure of cellulose and microcrystalline cellulose from various wood species, cotton and flax studied by X-ray scattering," Cellulose 16(6), 999-1015.
89. Leppänen, K., Bjurhager, I., Peura, M., Kallonen, A., Suuronen, J.-P., Penttilä, P., Love, J., Fagerstedt, K., and Serimaa, R. (2011). "X-ray scattering and microtomography study on the structural changes of never-dried silver birch, European aspen and hybrid aspen during drying," Holzforschung 65(6), 865-873.
90. Li, Q., and Renneckar, S. (2011). "Supramolecular structure characterization of molecularly thin cellulose I nanoparticles," Biomacromolecules 12(3), 650-659.
91. Liitiä, T., Maunu, S. L., Hortling, B., Tamminen, T., Pekkala, O., and Varhimo, A. (2003). "Cellulose crystallinity and ordering of hemicelluloses in pine and birch pulps as revealed by solid-state NMR spectroscopic methods," Cellulose 10(4), 307-316.
92. Lindman, B., Karlström, G., and Stigsson, L. (2010). "On the mechanism of dissolution of cellulose," J. Mol. Liq. 156(1), 76-81.
93. Lindström, T. (1992). "Chemical factors affecting the behaviour of fibres during papermaking," Nord. Pulp Pap. Res. J. 4(7), 181-192.
94. Lindström, T., and Carlsson, G. (1982). "The effect of carboxyl groups and their ionic form during drying on the hornification of cellulose fibers," Sven. Papperstidn. 85(3), R146-R151.
95. Liu, Y.-S., Baker, J.O., Zeng, Y., Himmel, M. E., Haas, T., and Ding, S.-Y. (2011). "Cellobiohydrolase hydrolyzes crystalline cellulose on hydrophobic faces," J. Biol. Chem. 286(13), 11195-11201.
96. Luo, X. L., Zhu, J. Y., Gleisner, R., and Zhan, H. Y. (2011). "Effects of wet-pressing-induced fiber hornification on enzymatic saccharification of lignocelluloses," Cellulose 18(4), 1055-1062.
97. Luukko, K., and Maloney, T. C. (1999). "Swelling of mechanical pulp fines," Cellulose 6(2), 123-135.
98. Lyne, L. M., and Gallay, W. (1950). "The effect of drying and heating on the swelling of cellulose fibers and paper strength," Tappi 33(9), 429-435.
99. Maloney, T. C., Laine, J. E., and Paulapuro, H. (1999). "Comments on the measurement of cell wall water," Tappi J. 82(9), 125-127.
100. Maloney, T. C., and Paulapuro, H. (1998). "Hydration and swelling of pulp fibers measured with differential scanning calorimetry," Nord. Pulp Pap. Res. J. 13(1), 31-36.
101. Maloney, T. C., and Paulapuro, H. (1999). "The formation of pores in the cell wall," J. Pulp Pap. Sci. 25(12), 430-436.
102. Maloney, T. C., and Paulapuro, H. (2000). "The effect of drying conditions on the swelling and bonding properties of bleached kraft hardwood pulp," Appita Annual Conference Proceedings 1, 41-46.
103. Maloney, T. C., and Paulapuro, H. (2001). "Thermoporosimetry of pulp fibers," Trans. 12th Fundamental Research Symposium, Oxford, 897-926.
104. Mann, J., and Marrinan, H. J. (1956). "The reaction between cellulose and heavy water, Part 3. - A quantitative study by infra-red spectroscopy," Trans. Faraday Soc. 52, 492-497.
105. Mark, H. (1940). "Intermicellar hole and tube system in fiber structure," J. Phys. Chem. 44, 764-788.
106. Matsuda, Y., Isogai, A., and Onabe, F. (1994). "Effects of thermal and hydrothermal treatments on the reswelling capabilities of pulps and papersheets," J. Pulp Pap. Sci. 20(11), J323-J327.
107. McKee R.C. (1971). "Effect of repulping on sheet properties & fiber characteristics," Pap. Trade J. 155(21), 34-40.
108. Michell, A. J., and Higgins, H. G. (1999). "The absence of free hydroxyl groups in cellulose," Cellulose 6(1), 89-91.
109. Minor, J. L. (1994). "Hornification - its origin and meaning," Progr. Pap. Recycling 3(2), 93-95.
110. Müller, M., Czihak, C., Schober, H., Nishiyama, Y., and Vogl, G. (2000). "All disordered regions of native cellulose show common low-frequency dynamics," Macromolecules 33(5), 1834-1840.
111. Nazhad, M. (2005). "Recycled fiber quality - A review," J. Ind. Eng. Chem. 11(3), 314-329.
112. Nazhad, M., and Paszner, L. (1994). "Fundamentals of strength loss in recycled paper," Tappi J. 77(9), 171-179.
113. Newman, R. H. (2004). "Carbon-13 NMR evidence for cocrystallization of cellulose as a mechanism for hornification of bleached kraft pulp," Cellulose 11(1), 45-52.
114. Nishiyama, Y., Kim, U.-J., Kim, D.-Y., Katsumata, K. S., May, R. P., and Langan, P. (2003b). "Periodic disorder along ramie cellulose microfibrils," Biomacromolecules 4(4), 1013-1017.
115. Nishiyama, Y., Langan, P., and Chanzy, H. (2002). "Crystal structure and hydrogen-bonding system in cellulose Iß from Synchrotron X-ray and neutron fiber diffraction," J. Am. Chem. Soc. 124(31), 9074-9082.
116. Nishiyama, Y., Sugiyama, J., Chanzy, H., and Langan, P. (2003a). "Crystal structure and hydrogen bonding system in cellulose Ia from Synchrotron X-ray and neutron fiber diffraction," J. Am. Chem. Soc. 125(47), 14300-14306.
117. Nishiyama, Y., Johnson, G. P., French, A. D., Forsyth, V. T., and Langan, P. (2008). "Neutron crystallography, molecular dynamics, and quantum mechanical studies of the nature of hydrogen bonding in cellulose I?," Biomacromolecules 9(11), 3133-3140.
118. Okita, Y., Saito, T., and Isogai, A. (2010). "Entire surface oxidation of various cellulose microfibrils by TEMPO-mediated oxidation," Biomacromolecules 11(6), 1696-1700.
119. Oksanen, T., Buchert, J., and Viikari, L. (1997). "The role of hemicelluloses in the hornification of bleached kraft pulps," Holzforschung 51(4), 355-360.
120. Olsson, A.-M., and Salmén, L. (2004). "The softening behavior of hemicelluloses related to moisture," ACS Sym. Ser. 864(13), 184-197.
121. Östlund, Å., Köhnke, T., Nordstierna, L., and Nydén, M. (2010). "NMR cryoporometry to study the fiber wall structure and the effect of drying," Cellulose 17(2), 321-328.
122. Page, D. H. (1985). "The mechanism of strength development of dried pulps by beating," Sven. Papperstidn. 88(3), R30-R35.
123. Page, D. H., and De Grâce, J. H. (1967). "The delamination of fiber walls by beating and refining," Tappi 50(10), 489-495.
124. Park, S., Baker, J. O., Himmel, M. E., Parilla, P. A., and Johnson, D. K. (2010). "Cellulose crystallinity index: Measurement techniques and their impact on interpreting cellulase performance," Biotechnol. Biofuels 3(1), 10.
125. Park, S., Venditti, R. A., Jameel, H., and Pawlak, J. J. (2006a). "A novel method to evaluate fibre hornification by high resolution thermogravimetric analysis," Appita J. 59(6), 481-485.
126. Park, S., Venditti, R. A., Jameel, H., and Pawlak, J. J. (2006b). "Changes in pore size distribution during the drying of cellulose fibers as measured by differential scanning calorimetry," Carbohyd. Polym. 66(1), 97-103.
127. Petrov, O. V., and Furó, I. (2009). "NMR cryoporometry: Principles, applications and potential," Prog. Nucl. Mag. Res. Sp. 54(2), 97-122.
128. Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., and Lindström, T. (2007). "Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels," Biomacromolecules 8(6), 1934-1941.
129. Rácz, I., and Borsa, J. (1997). "Swelling of carboxymetylated cellulose fibres," Cellulose 4(4), 293-303.
130. Rebuzzi, F., and Evtuguin, D. V. (2006). "Effect of glucuronoxylan on the hornification of Eucalyptus globulus bleached pulps," Macromol. Symp. 232(1), 121-128.
131. Renaud, R. (1947). "Le raffinage. Emploi de la centrifugation dans le contrôle du gonflement," Association Technique de l'Industrie Papetiere 1, 14-17.
132. Saito, T., Hirota, M., Tamura, N., Kimura, S., Fukuzumi, H., Heux, L., and Isogai, A. (2009). "Individualization of nano-sized plant cellulose fibrils by direct surface carboxylation using TEMPO catalyst under neutral conditions," Biomacromolecules 10(7), 1992-1996.
133. Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., and Isogai, A. (2006). "Homogenous suspensions of individualized microfibrils from TEMPO-catalyzed oxidation of native cellulose," Biomacromolecules 7(6), 1687-1691.
134. Salmén, L., and Olsson, A.-M. (1998). "Interaction between hemicelluloses, lignin and cellulose: Structure-property relationships," J. Pulp Pap. Sci. 24(3), 99-103.
135. Samejima, M., Sugiyama, J., Igarashi, K., and Eriksson, K.-E. L. (1998). "Enzymatic hydrolysis of bacterial cellulose," Carbohyd. Res. 305(2), 281-288.
136. Samuelson, O., and Törnell, B. (1961). "Influence of lactones upon the determination of carboxyl groups in cellulose," Sven. Papperstidn. 64(6), 198-203.
137. Scallan, A. M. (1971). "A quantitative picture of the fringed micellar model of cellulose," Text. Res. J. 41(8), 647-653.
138. Scallan, A. M. (1974). "The structure of the cell wall of wood - A consequence of anisotropic inter-microfibrillar bonding?," Wood Sci. 6(3), 266-271.
139. Scallan, A. M., and Tigerström, A. C. (1992). "Swelling and elasticity of the cell walls of pulp fibres," J. Pulp Pap. Sci. 18(5), J188-J193.
140. Sepall, O., and Mason, S. G. (1961). "Hydrogen exchange between cellulose and water II. Interconversion of accessible and inaccessible regions," Can. J. Chem. 39, 1944-1955.
141. Sheikhi, P., Talaeipour, M., Hemasi, A. H., Eslam, H. K., and Gumuskaya, E. (2010). "Effect of drying and chemical treatment on bagasse soda pulp properties during recycling," BioResources 5(3), 1702-1716.
142. Steege, H.-H., and Philipp, B. (1974). "Herstellung, Charakterisierung und Anvendung mikrokristalliner Zellulose," Zellst. Pap. 23(3), 68-73.
143. Stone, J. E., and Scallan, A. M. (1965a). "Effect of component removal upon the porous structure of the cell wall of wood," J. Polym. Sci.: Part C 11, 13-25.
144. Stone, J. E., and Scallan, A. M. (1965b). "Influence of drying on the pore structures of the cell wall," Consolidation of the Paper Web, London, Vol. 1., 145-174.
145. Stone, J. E., and Scallan, A. M. (1965c). "A study of cell wall structure by nitrogen adsorption," Pulp. Pap. Mag. Can. 66(8), T407-T414.
146. Stone, J. E., and Scallan, A. M. (1967). "The effect of component removal upon the porous structure of the cell wall of wood. II. Swelling in water and the fiber saturation point," Tappi 50(10), 496-501.
147. Stone, J. E., and Scallan, A. M. (1968). "A structural model for the cell wall of water-swollen wood pulp fibres based on their accessibility to macromolecules," Cell. Chem. Technol. 2(3), 343-358.
148. Stone, J. E., Scallan, A. M., and Aberson, G. M. A. (1966). "The wall density of native cellulose fibres," Pulp Pap. Mag. Can. 67(5), T263-T268.
149. Stone, J. E., Scallan, A. M., and Abrahamson, B. (1968). "Influence of beating on cell wall swelling and internal fibrillation," Sven. papperstidn. 71(19), 687-694.
150. Suchy, M., Kontturi, E., and Vuorinen, T. (2010a). "Impact of drying on wood ultrastructure: Similarities in cell wall alteration between native wood and isolated wood-based fibers," Biomacromolecules 11(8), 2161-2168.
151. Suchy, M., Virtanen, J., Kontturi, E., and Vuorinen, T. (2010b). "Impact of drying on wood ultrastructure observed by deuterium exchange and photoacoustic FT-IR spectroscopy," Biomacromolecules 11(2), 515-520.
152. Sumi, Y., Hale, R. D., and Rånby, B. G. (1963). "The accessibility of native cellulose microfibrils," Tappi 47(10), 126-130.
153. Thimm, J. C., Burritt, D. J., Ducker, W. A., and Melton, L. D. (2009). "Pectins influence microfibril aggregation in celery cell walls: An atomic force microscopy study," J. Struct. Biol. 168(2), 337-344.
154. Virtanen, T., Maunu, S. L., Tamminen, T., Hortling, B., and Liitiä, T. (2008). "Changes in fiber ultrastructure during various kraft pulping conditions evaluated by 13C CPMAS NMR spectroscopy," Carbohyd. Polym. 73(1), 156-163.
155. Wågberg, L., Decher, G., Norgren, M., Lindström, T., Ankerfors, M., and Axnäs, K. (2008). "The build-up of polyelectrolyte multilayers of microfibrillated cellulose and cationic polyelectrolytes," Langmuir 24(3), 784-795.
156. Wan, J., Wang, Y., and Xiao, Q. (2010). "Effects of hemicellulose removal on cellulose fiber structure and recycling characteristics of eucalyptus pulp," Bioresource Technol. 101(12), 4577-4583.
157. Wang, X., Maloney, T. C., and Paulapuro, H. (2003). "Internal fibrillation in never-dried and once-dried chemical pulps," Appita J. 56(6), 455-459.
158. Weise, U. (1998). "Hornification - mechanisms and terminology," Pap. Puu 80(2), 110-115.
159. Weise, U., Hiltunen, E., and Paulapuro, H. (1998). "Verhornung von Zellstoff und Maßnahmen zu ihrer Reversion," Das Papier 52(10A), V14-V19.
160. Weise, U., Maloney, T., and Paulapuro, H. (1996). "Quantification of water in different states of interaction with wood pulp fibres," Cellulose 3(1), 189-202.
161. Wickholm, K., Larsson, P. T., and Iversen, T. (1998). "Assignment of non-crystalline forms in cellulose I by CP/MAS 13C NMR spectroscopy," Carbohyd. Res. 312(3), 123-129.
162. Wistara, N., and Young, R. A. (1999). "Properties and treatments of pulps from recycled paper. Part I. Physical and chemical properties of pulps," Cellulose 6(4), 291-324.
163. Wistara, N., Zhang, X., and Young, R. A. (1999). "Properties and treatments of pulps from recycled paper. Part II. Surface properties and crystallinity of fibers and fines," Cellulose 6(4), 325-348.
164. Zhang, M., Hubbe, M. A., Venditti, R. A., and Heitmann, J. A. (2002). "Can recycled kraft fibres benefit from chemical addition before they are first dried?," Appita J. 55(2), 135-144.
165. Zhang, M., Hubbe, M. A., Venditti, R. A., and Heitmann, J. A. (2004). "Effects of sugar addition before drying on the wet flexibility of redispersed kraft fibres," J. Pulp Pap. Sci. 30(1), 29-34.