The content of different hydrogen bond models and crystal structure of eucalyptus fibers during beating

BioResources

Volumn 8, Issue 1, 2013, Pages 717-734

  Yuan, Longting ^a   Wan, Jinquan ^a   Ma, Yongwen ^a   Wang, Yan ^a   Huang, Mingzhi ^a   Chen, Yangmei ^b  

^a SOUTH CHINA UNIVERSITY OF TECHNOLOGY   (China)

^b TIANJIN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

Author keywords

Beating; Crystal structure; Eucalyptus fibers; Hydrogen bond

Indexed keywords

AVERAGE WIDTH; CROSS POLARIZATIONS; CRYSTALLINE CELLULOSE; EUCALYPTUS FIBERS; FOURIER TRANSFORM INFRARED SPECTROMETER; INTRA-MOLECULAR HYDROGEN BONDS; LATTICE PLANE; NONLINEAR FITTING;

CELLULOSE; CRYSTAL STRUCTURE; FOURIER TRANSFORM INFRARED SPECTROSCOPY; MAGIC ANGLE SPINNING; MOLECULAR PHYSICS; MOLECULAR STRUCTURE; NATURAL FIBERS; NUCLEAR MAGNETIC RESONANCE SPECTROSCOPY; PULP BEATING; X RAY DIFFRACTION;

HYDROGEN BONDS;

BEATING; CELLULOSE; CRYSTAL STRUCTURE; EUCALYPTUS; FIBERS; HYDROGEN BONDS; MOLECULAR STRUCTURE; NATURAL FIBERS; X RAY DIFFRACTION;

EUCALYPTUS;

EID: 84876142570     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Article

References (49)

1. Baratieri, M., Baggio, P., Fiori, L., and Grigiante, M. (2008). "Biomass as an energy source: Thermodynamic constraints on the performance of the conversion process," Bioresource Technology 99(15), 7063-7073.
2. Bhardwaj, N. K., Hoang, V., and Nguyen, K. L. (2007). "A comparative study of the effect of refining on physical and electrokinetic properties of various cellulosic fibres," Bioresource Technology 98(8), 1647-1654.
3. Billosta, V., Brandstrom, J., Cochaux, A., Joseleau, J. P. and Ruel, K. (2006). "Ultrastructural organization of wood cell wall may explain some modifications undergone by fibres during pulping process," Cell. Chem. Technol. 40, 231-237.
4. Chen, Y. M., Wan, J. Q., Zhang, X. L. (2012). "Effect of beating on recycled properties of unbleached eucalyptus cellulose fiber," Carbohydrate Polymers 87(1), 730-736.
5. Chen, Y. M., Wan, J. Q., Ma, Y. W. (2010). "Effect of noncellulosic constituents on physical properties and pore structure of recycled fiber," Appita Journal 62(4), 290- 295.
6. Carvalho, M., G., Santos, J. M. R. C. A., Martins, A. A., and Figueiredo, M. M. (2005). "The effects of beating, web forming and sizing on the surface energy of Eucalyptus globulus kraft fibers evaluated by inverse gas chromatography," Cellulose 12(4), 371- 383.
7. Chen, R., Jakes, K. A., Foreman, D. W. (2004). "Peak-fitting analysis of cotton fiber powder X-ray diffraction spectra," Journal of Applied Polymer Science 93(5), 2019- 2024
8. Colom, X., Carrillo, F., Nogues, F., and Garriga, P. (2003). "Structural analysis of photodegraded wood by means of FTIR spectroscopy," Polymer Degradation and Stability 80(3), 543-549.
9. Debzi, E. M., Chanzy, H., Sugiyama, J., Tekely, P., and Excoffier, G. (1991). "The Iα →Iβ transformation of highly crystalline cellulose by anneaing in various mediums," Macromolecules 24(26), 6816-6822.
10. Duchesne, I., Hult, E. L., Molin, U., Daniel, G., Iversen, T., and Lennhon H. (2001). "The influence of hemicellulose on fibril-aggregation of kraft pulp fibers as revealed by FE-SEM and CP/MAS 13C NMR," Cellulose 8(2), 103-111.
11. Dai, D. S., and Fan, M. Z. (2011). "Investigation of the dislocation of natural fibres by Fourier transform infrared spectroscopy," Vibrational Spectroscopy 55(2), 300-306.
12. Gümüskaya, E., Usta, M., and Kirei, H. (2003). "The effects of various pulping conditions oncrystalline structure of cellulose in cotton linters," Polym. Degrad. Stab. 81(3), 559-64.
13. He, J., Tang, Y., and Wang, S. Y. (2007). "Differences in morphological characteristics of bamboo fibers and other natural cellulose fibers: Studies on X-ray diffraction, solid state 13C-CP/MAS NMR, and second derivative FTIR spectroscopy data," Iranian Polymer Journal 16(12), 807-818.
14. Hermans, P. H., and Weidinger, A. (2003). "X-ray studies on the crystallinity of cellulose," Journal of Polymer Science 4(2), 135-144.
15. Hult, E. L., Iversen, T., and Sugiyama, J. (2003). "Characterization of the supermolecular structure of cellulose in wood pulp fibers," Cellulose 10(2), 103-110.
16. Hult, E. L., Liitiä, T., Maunu, S., L., Hortling, B., and Iversen, T. (2002). "A CP/MAS 13C-NMR study of cellulose structure on the surface of refined kraft pulp fibers," Carbohydrate Polymers 49(2), 231-234.
17. Hult, E. L., Larsson, P. T., and Iversen, T. (2001). "Cellulose fibril aggregation - An inherent property of kraft pulps," Polymer 42 (8), 3309-3314.
18. Heinze, T., and Liebert, T. (2001). "Unconventional methods in cellulose functionalization," Progress in Polymer Science 26(9), 1689-1762.
19. Horii, F., Hiral, A., and Kitamaru, R. (1987). "CP/MAS 13C NMR spectra of the crystalline components of native cellulose," Macromlecules 20(9), 2117-2120.
20. Jiménez, L., López, F., and Alaejos, J. (2006). "Materias primas alternativas para pastas depapel. Tipos, características, procesosy situación mundial," Ingeniería Química 435(4), 76-90.
21. Ibrahem, A. A., Yousef, M. A., and EL-Meadwy, S. A. (1989). "Effect of beating on fiber crystallinity and physical properties of paper sheets," Journal of Islamic Academy of Sciences 2(4), 295-298.
22. Kim, S., and Holtzapple, M. T. (2006). "Effect of structural features on enzyme digestibility of corn stover," Bioresource Technology 97(4), 583-591.
23. Kure, K. A. and Dahlqvit, G. (1998). "Development of structural fiber properties in high intensity refining," Pulp Paper Can. 99(7), 59-63.
24. Lorenzo, M. L., Nierstrasz, V. A., and Warmoeskerken, M. M. C. G. (2009). "Endoxylanase action towards the improvement of recycled fiber properties," Cellulose 16(1), 103-115.
25. Liao, Z. D., Huang, Z. Q., Hu, H. Y., Zhang, Y. J., and Tan, Y. F. (2011). "Microscopic structure and properties changes of cassava stillage residue pretreated by mechanical activation," Bioresource Technology 102(17), 7953-7958.
26. Liu, D. T., Li, J., Yang, R. D., Mo, L. H., Huang, L. H., Chen, Q. F., and Chen, K. F. (2008). "Preparation and characteristics of moulded biodegradable cellulose fibers/MPU-20 composites (CFMCS) by steam injection technology," Carbohydrate Polymers 74(2), 290-300.
27. Liu, R., Yu, H., and Huang, Y. (2005). "Structure and morphology of cellulose in wheat straw," Cellulose 12(1), 25-34.
28. Liu, S. L., Li, G. S., Lei, L. R., Cao, G. P., and Li, S. Y. (2002). "Optimum treatment of waste pulp using medium consistency pulp refining," China Pulp and Paper Industry 23(10), 38-39.
29. Miyamoto, H., Ago, M., Yamane, C., Seguchi, M., and Ueda, K. (2011). "Supermolecular structure of cellulose/amylose blends prepared from aqueous NaOH solutions and effects of amylose on structural formation of cellulose from its solution," Carbohydrate Research 346(6), 807-814.
30. Mohkami, M., and Talaeipour, M. (2011). "Investigation of the chemical structure of carboxylated and carboxymethlated fibersfrom waste paper via XRD and FTIR analysis," BioResources 6(2), 1988-2003.
31. Marcovich, N. E., Reboredo, M. M., and Aranguren, M. I. (2001). "Modified wood flour as thermoset fillers. II. Thermal degradation of wood flours and composites," Thermochimica Acta 372(1-2), 45-57.
32. Maunu, S., Liitiä, T., Kauliomäki, S., Hortling, B., Sundquist, J. (2000). "13C CPMAS NMR investigations of cellulose polymorphs in different pulps," Cellulose 7(2), 147- 159.
33. Maréchal, Y., and Chanzy, H. (2000). "The hydrogen bond network in Iß cellulose as observed by infrared spectrometry," Journal of Molecular Structure 523(1-3), 183- 196.
34. Newman, R. H. (2004). "Carbon-13 NMR evidence for cocrystallization of cellulose as a mechanism for hornification of bleached kraft pulp," Cellulose 11(1), 45-52.
35. Oh, S. Y., Yoo, D. Il., Shinet, Y., Kim, C. H., Kim, H. Y., Chung, Y. S., Park, W. H., and Youk, J. H. (2005). "Crystallines tructure analysis of cellulose treated with sodium Hydroxide and carbon dioxide by means of X-ray diffraction and FTIR spectroscopy," Carbohydrate Research 340(15), 2376-2391.
36. Poletto, M., Pistor, V., Zeni, M., and Zattera, A. J. (2011). "Crystalline properties and decomposition kinetics of cellulose fibers in wood pulp obtained by two pulping processes," Polymer Degradation and Stability 96(4), 679-685.
37. Popescu, C. M., Singurel, G., Popescu, M. C., Vasile, C., Argyropoulos, D., and Willför, S. (2009). "Vibrational spectroscopy and X-ray diffraction methods to establish the differences between hardwood and softwood," Carbohydrate Polymers 77(4), 851- 857.
38. Popescu, C. M., Popescu, M. C., Singurel, G., Vasile, C., Argyropoulos, D. S., and Willfor, S. (2007). "Spectral characterization of eucalyptus wood," Applied Spectroscopy 61(11), 1168-1177.
39. Ruel, K., Barnoud, F., and Goring, D. A. I. (1978). "Lamellation in the S2 layer of softwood tracheids as demonstrated by scanning transmission electron microscopy," Wood Sci. Technol.12(4), 287-291.
40. Schwanninger, M., Rodrigues, J. C., Pereira, H., and Hinterstoisser, B. (2004). "Effects of short-time vibratory ball milling on the shape of FT-IR spectra of wood and cellulose," Vibrational Spectroscopy 36(1), 23-40.
41. Struszczyk, H. (1986). "Modification of lignins. ?. Reaction of lignosulfonates with chlorophosphazenes," Journal of Macromolecular Science A23(8), 973-992.
42. Segal, L., Creely, J. J., Martin, A. E. J., and Conrad, C. M. (1962). "An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer," Tex. Res. J. 29(10), 786-794.
43. Sodhi, N. S., Koh, L. P., and Clements, R. (2010). "Conserving Southeast Asian forest biodiversity in human-modified landscapes," Biological Conservation 143(10), 2375- 2384.
44. Sun, J. X., Sun, X. F., Zhao, H., and Sun, R. C. (2004). "Isolation and characterization of cellulose from sugarcane bagasse," Polymer Degradation and Stability 84(2), 331- 339.
45. Sugiyama, J., Persson, J., and Chanzy, H. (1991). "Combined infrared and electron diffraction study of the polymorphism of native cellulose," Macromolecules 24(9), 2461-2466.
46. Wan, J. Q., Wang, Y., Xiao, Q. (2010). "Effects of hemicellulose removal on cellulose fiber structure and recycling characteristics of eucalyptus pulp," Bioresource Technology 101(12), 4577-4583
47. Wan, J. Q., and Ma, Y. W. (2004). Waste Papermaking and Pollution Control, China Light Industry Press, Beijing.
48. Wickholm, K., Larsson, P. T., and Iversen, T. (1998). "Assignment of non-crystalline forms in cellulose I by CP/MAS 13C NMR spectroscopy," Carbohydr. Res. 312(3), 123-129.
49. Zhai, D. L., Cannon, C. H., and Slik, J. W. F. (2012). "Rubber and pulp plantations represent a double threat to Hainan's natural tropical forests," Journal of Environment Management 96(1), 64-73