The surface properties of cellulose and lignocellulosic materials assessed by inverse gas chromatography: A review

Cellulose

Volumn 20, Issue 6, 2013, Pages 2675-2693

  Gamelas, José A F ^a  

^a UNIVERSITY OF COIMBRA   (Portugal)

Author keywords

Acid base properties; Cellulose; Composites; Inverse gas chromatography; Polymers; Surface energy

Indexed keywords

ACID-BASE PROPERTY; DISPERSIVE COMPONENTS; INVERSE GAS CHROMATOGRAPHY; LEWIS ACID-BASE INTERACTION; LIGNOCELLULOSIC MATERIAL; PHYSICAL MODIFICATIONS; POLYMERIC MATRICES; THERMODYNAMIC DATA;

CELLULOSE; CHEMICAL MODIFICATION; COMPOSITE MATERIALS; GAS CHROMATOGRAPHY; INTERFACIAL ENERGY; MATERIALS; POLYMERS; PROBES; SURFACE PROPERTIES;

CHARACTERIZATION;

EID: 84887879415     PISSN: 09690239     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10570-013-0066-5     Document Type: Review

References (108)

1. Abdel-Halim ES (2012) Physiochemical properties of differently pretreated cellulosic fibers. Carbohydr Polym 88: 1201-1207.
2. Bach S, Belgacem MN, Gandini A (2005) Hydrophobisation and densification of wood by different chemical treatments. Holzforschung 59: 389-396.
3. Belgacem MN (2000) Characterization of polysaccharides, lignin and other woody components by inverse gas chromatography: a review. Cellul Chem Technol 34: 357-383.
4. Belgacem MN, Gandini A (1999) IGC as a tool to characterize dispersive and acid-base properties of the surface of fibers and powders. In: Pfefferkorn E (ed) Interfacial phenomena in chromatography. Marcel Dekker, New York, pp 41-124.
5. Belgacem MN, Czeremuszkin G, Sapieha S, Gandini A (1995) Surface characterization of cellulose fibres by XPS and inverse gas chromatography. Cellulose 2: 145-157.
6. Belgacem MN, Blayo A, Gandini A (1996) Surface characterization of polysaccharides, lignins, printing ink pigments, and ink fillers by inverse gas chromatography. J Colloid Interface Sci 182: 431-436.
7. Boras L, Sjostrom J, Gatenholm P (1997) Characterization of surfaces of CTMP fibers using inverse gas chromatography combined with multivariate data analysis. Nord Pulp Paper Res J 12(4): 220-224.
8. Borges JP, Godinho MH, Belgacem MN, Martins AF (2001) New bio-composites based on short fibre reinforced hydroxypropylcellulose films. Compos Interface 8: 233-241.
9. Botaro VR, Gandini A (1998) Chemical modification of the surface of cellulosic fibres. 2. Introduction of alkenyl moieties via condensation reactions involving isocyanate functions. Cellulose 5: 65-78.
10. Brendlé E, Papirer E (1997a) A new topological index for molecular probes used in inverse gas chromatography for the surface nanorugosity evaluation 1. Method of evaluation. J Colloid Interface Sci 194: 207-216.
11. Brendlé E, Papirer E (1997b) A new topological index for molecular probes used in inverse gas chromatography 2. Application for the evaluation of the solid surface specific interaction potential. J Colloid Interface Sci 194: 217-224.
12. Carvalho MG, Santos JMRCA, Martins AA, Figueiredo MM (2005a) The effects of beating, web forming and sizing on the surface energy of Eucalyptus globulus kraft fibres evaluated by inverse gas chromatography. Cellulose 12: 371-383.
13. Carvalho MG, Ferreira PJ, Santos JMRCA, Amaral JL, Figueiredo MM (2005b) Effect of extended cooking and oxygen prebleaching on the surface energy of Eucalyptus globulus kraft pulps. J Pulp Paper Sci 31(2): 90-94.
14. Chehimi MM, Abel M, Perruchot C, Delamar M, Lascelles SF, Armes SP (1999) The determination of the surface energy of conducting polymers by inverse gas chromatography at infinite dilution. Synth Met 104: 51-59.
15. Chen J, Yan N (2012) Hydrophobization of bleached softwood kraft fibers via adsorption of organo-nanoclay. Bioresources 7: 4132-4149.
16. Chtourou H, Riedl B, Kokta BV (1995) Surface characterizations of modified polyethylene pulp and wood pulps fibres using XPS and inverse gas chromatography. J Adhes Sci Technol 9: 551-574.
17. Chtourou H, Riedl B, Kokta BV (1997) Strength properties of wood-PE composites: influence of pulp ratio and pretreatment of PE fibers. Tappi J 80: 141-151.
18. Conder JR, Young CL (1979) Physicochemical measurement by gas chromatography. Wiley-Interscience, New York.
19. Cordeiro N, Gouveia C, Jacob John M (2011a) Investigation of surface properties of physico-chemically modified natural fibres using inverse gas chromatography. Ind Crop Prod 33: 108-115.
20. Cordeiro N, Gouveia C, Moraes AGO, Amico SC (2011b) Natural fibers characterization by inverse gas chromatography. Carbohydr Polym 84: 110-117.
21. Cordeiro N, Ornelas M, Ashori A, Sheshmani S, Norouzi H (2012) Investigation on the surface properties of chemically modified natural fibres using inverse gas chromatography. Carbohydr Polym 87: 2367-2375.
22. Coupas AC, Gauthier H, Gauthier R (1998) Inverse gas chromatography as a tool to characterize ligno-cellulosic fibers modified for composite applications. Polym Compos 19: 280-286.
23. Dominkovics Z, Dányádi L, Pukánszky B (2007) Surface modification of wood flour and its effect on the properties of PP/wood composites. Compos Part A Appl Sci 38: 1893-1901.
24. Donnet JB, Park SJ, Balard H (1991) Evaluation of specific interactions of solid surfaces by inverse gas chromatography-a new approach based on polarizability of the probes. Chromatographia 31: 434-440.
25. Donnet JB, Qin RY, Wang MJ (1992) A new approach for estimating the molecular areas of linear hydrocarbons and their derivatives. J Colloid Interface Sci 153: 572-577.
26. Dorris GM, Gray DG (1980) Adsorption of n-alkanes at zero surface coverage on cellulose paper and wood fibres. J Colloid Interface Sci 77: 353-362.
27. Duarte GV, Gamelas JAF, Ramarao BV, Amidon TE, Ferreira PJ (2012) Properties of extracted Eucalyptus globulus kraft pulps. Tappi J 11(4): 47-55.
28. Felix JM, Gatenholm P (1993a) Characterization of cellulose fibers using inverse gas chromatography. Nord Pulp Paper Res J 8(1): 200-203.
29. Felix JM, Gatenholm P (1993b) Formation of entanglements at brushlike interfaces in cellulose-polymer composites. J Appl Polym Sci 50: 699-708.
30. Felix JM, Gatenholm P, Schreiber HP (1993) Controlled interactions in cellulose-polymer composites. 1. Effect on mechanical properties. Polym Compos 14: 449-457.
31. Felix J, Gatenholm P, Schreiber HP (1994) Plasma modification of cellulose fibers: effects on some polymer composite properties. J Appl Polym Sci 51: 285-295.
32. Fowkes FM (1964) Attractive forces at interfaces. Ind Eng Chem 56: 40.
33. Gadhe JB, Gupta RB, Elder T (2006) Surface modification of lignocellulosic fibers using high-frequency ultrasound. Cellulose 13: 9-22.
34. Gamelas JAF, Santos JMRCA, Ferreira PJ (2011) Surface energetics of softwood kraft pulps by inverse gas chromatography. In: Ander P, Bauer W, Heinemann S, Kallio P, Passas R, Treimanis A (eds) Fine structure of papermaking fibres. COST Office, Brussels, pp 39-49.
35. Gamelas JAF, Evtyugina MG, Portugal I, Evtuguin DV (2012) New polyoxometalate-functionalized cellulosic fibre/silica hybrids for environmental applications. RSC Adv 2: 831-839.
36. Gamelas JAF, Duarte GV, Ferreira PJ (2013) Inverse gas chromatography and XPS of extracted kraft pulps. Holzforschung 67: 273-276.
37. Gardner DJ, Oporto GS, Mills R, Samir MASA (2008) Adhesion and surface issues in cellulose and nanocellulose. J Adhesion Sci Technol 22: 545-567.
38. Garnier G, Glasser WG (1994) Measurement of the surface free energy of amorphous cellulose by alkane adsorption: a critical evaluation of inverse gas chromatography (IGC). J Adhesion 46: 165-180.
39. Garnier G, Glasser WG (1996) Measuring the surface energies of spherical cellulose beads by inverse gas chromatography. Polym Eng Sci 36: 885-894.
40. Gassan J, Gutowski VS, Bledzki AK (2000) About the surface characteristics of natural fibres. Macromol Mater Eng 283: 132-139.
41. Gauthier R, Joly C, Coupas AC, Gauthier H, Escoubes M (1998a) Interfaces in polyolefin/cellulosic fiber composites: chemical coupling, morphology, correlation with adhesion and aging in moisture. Polym Compos 19: 287-300.
42. Gauthier H, Coupas A, Villemagne P, Gauthier R (1998b) Physicochemical modifications of partially esterified cellulose evidenced by inverse gas chromatography. J Appl Polym Sci 69: 2195-2203.
43. Goss KU (1997) Considerations about the adsorption of organic molecules from the gas phase to surfaces: implications for inverse gas chromatography and the prediction of adsorption coefficients. J Colloid Interface Sci 190: 241-249.
44. Gregorova A, Wimmer R, Hrabalova M, Koller M, Ters T, Mundigler N (2009) Effect of surface modification of beech wood flour on mechanical and thermal properties of poly(3-hydroxybutyrate)/wood flour composites. Holzforschung 63: 565-570.
45. Gulati D, Sain M (2006a) Surface characteristics of untreated and modified hemp fibers. Polym Eng Sci 46: 269-273.
46. Gulati D, Sain M (2006b) Fungal-modification of natural fibers: a novel method of treating natural fibers for composite reinforcement. J Polym Environ 14: 347-352.
47. Gurnagul N, Gray DG (1987) Surface-adsorption at low coverage of normal-alkanes on bleached kraft papers using gas-chromatography. Can J Chem 65: 1935-1939.
48. Gutmann V (1978) The donor-acceptor approach to molecular interactions. Plenum Press, New York.
49. Heng JYY, Pearse DF, Thielmann F, Lampke T, Bismarck A (2007) Methods to determine surface energies of natural fibres: a review. Compos Interface 14: 581-604.
50. Jacob PN, Berg JC (1994) Acid-base surface energy characterization of microcrystalline cellulose and two wood pulp fiber types using inverse gas chromatography. Langmuir 10: 3086-3093.
51. Jandura P, Riedl B, Kokta BV (2002) Inverse gas chromatography study on partially esterified paper fiber. J Chromatogr 969: 301-311.
52. Kamdem DP, Riedl B (1991) Characterization of wood fibers modified by phenol-formaldehyde. Colloid Polym Sci 269: 595-603.
53. Kamdem DP, Riedl B (1992) Inverse gas chromatography of lignocellulosic fibers coated with a thermosetting polymer: use of peak maximum and conder and young methods. J Colloid Interface Sci 150: 507-516.
54. Kamdem DP, Bose SK, Luner P (1993) Inverse gas chromatography characterization of birch wood meal. Langmuir 9: 3039-3044.
55. Kazayawoko M, Balatinecz J, Romansky M (1997) Thermodynamics of adsorption of n-alkanes on maleated wood fibers by inverse gas chromatography. J Colloid Interface Sci 190: 408-415.
56. Kazayawoko M, Balatinecz JJ, Matuana LM (1999) Surface modification and adhesion mechanisms in wood fiber-polypropylene composites. J Mater Sci 34: 6189-6199.
57. Kiselev AV (1967) Adsorbents in gas chromatography. In: Giddings JC, Keller RA (eds) Advances in chromatography. Marcel Dekker Co., New York, vol. 4, pp 113-196.
58. Lee HL, Luner P (1989) Characterization of AKD sized papers by inverse gas chromatography. Nord Pulp Paper Res J 4(2): 164-172.
59. Lee HL, Luner P (1993) Analysis of the adsorption of alkanes on high surface area cellulose by inverse gas chromatography. J Wood Chem Technol 13: 127-144.
60. Liu FP, Rials TG, Simonsen J (1998) Relantionship of wood surface energy to surface composition. Langmuir 14: 536-541.
61. Lundqvist A, Odberg L, Berg JC (1995) Surface characterization of non-chlorine-bleached pulp fibers and calcium-carbonate coatings using inverse gas-chromatography. Tappi J 78: 139-142.
62. Matuana LM, Woodhams RT, Balatinecz JJ, Park CB (1998) Influence of interfacial interactions on the properties of PVC/cellulosic fiber composites. Polym Compos 19: 446-455.
63. Matuana LM, Balatinecz JJ, Park CB, Woodhams RT (1999) Surface characteristics of chemically modified newsprint fibers determined by inverse gas chromatography. Wood Fiber Sci 31: 116-127.
64. Megiatto JD, Oliveira FB, Rosa DS, Gardrat C, Castellan A, Frollini E (2007) Renewable resources as reinforcement of polymeric matrices: composites based on phenolic thermosets and chemically modified sisal fibers. Macromol Biosci 7: 1121-1131.
65. Megiatto JD, Silva CG, Rosa DS, Frollini E (2008) Sisal chemically modified with lignins: correlation between fibers and phenolic composites properties. Polym Degrad Stab 93: 1109-1121.
66. Mills RH, Gardner DJ, Wimmer R (2008) Inverse gas chromatography for determining the dispersive surface free energy and acid-base interactions of sheet molding compound-Part II 14 lignocellulosic fiber types for possible composite reinforcement. J Appl Polym Sci 110: 3880-3888.
67. Mills RH, Jara R, Gardner DJ, van Heiningen A (2009) Inverse gas chromatography for determining the surface free energy and acid-base chemical characteristics of a water extracted hardwood (Acer rubrum). J Wood Chem Technol 29(1): 11-23.
68. Mukhopadhyay P, Schreiber HP (1995) Aspects of acid-base interactions and use of inverse gas chromatography. Colloid Surf A 100: 47-71.
69. Oporto GS, Gardner DJ, Kiziltas A, Neivandt DJ (2011) Understanding the affinity between components of wood-plastic composites from a surface energy perspective. J Adhes Sci Technol 25: 1785-1801.
70. Papirer E, Brendle E, Balard H, Vergelati C (2000) Inverse gas chromatography investigation of the surface properties of cellulose. J Adhes Sci Technol 14: 321-337.
71. Paredes JJ, Mills R, Howel C, Shaler SM, Gardner DJ, van Heiningen A (2009) Surface characterization of red maple strands after hot water extraction. Wood Fiber Sci 41(1): 38-50.
72. Peng S, Zou Q (2007) An investigation on the surface properties of lyocell-based carbon fiber with inverse gas chromatography. J Mater Sci 42: 6907-6912.
73. Peterlin S, Planinsek O, Moutinho I, Ferreira P, Dolenc D (2010) Inverse gas chromatography analysis of spruce fibers with different lignin content. Cellulose 17: 1095-1102.
74. Pommet M, Juntaro J, Heng JYY, Mantalaris A, Lee AF, Wilson K, Kalinka G, Shaffer MSP, Bismarck A (2008) Surface modification of natural fibers using bacteria: depositing bacterial cellulose onto natural fibers to create hierarchical fiber reinforced nanocomposites. Biomacromolecules 9: 1643-1651.
75. Ramires EC, Frollini E (2012) Tannin-phenolic resins: synthesis, characterization, and application as matrix in biobased composites reinforced with sisal fibers. Compos Part B Eng 43: 2851-2860.
76. Rani PR, Ramanaiah S, Reddy KS (2011) Lewis acid-base properties of cellulose acetate butyrate by inverse gas chromatography. Surf Interface Anal 43: 683-688.
77. Reutenauer S, Thielmann F (2003) The characterization of cotton fibers and the interaction with perfume molecules by inverse gas chromatography (IGC). J Mater Sci 38: 2205-2208.
78. Rials TG, Simonsen J (2000) Investigating interphase development in wood polymer composites by inverse gas chromatography. Compos Interface 7: 81-92.
79. Riddle FL, Fowkes FM (1990) Spectral shifts in acid-base chemistry. 1. van der Waals contributions to acceptor numbers. J Am Chem Soc 112: 3259-3264.
80. Riedl B, Kamdem DP (1992) Estimation of the dispersive component of surface energy of polymer grafted lignocellulosic fibers with inverse gas chromatography. J Adhes Sci Technol 6: 1053-1067.
81. Rjiba N, Nardin M, Dréan J, Frydrych R (2007) A study of the surface properties of cotton fibers by inverse gas chromatography. J Colloid Interface Sci 314: 373-380.
82. Rocha N, Gamelas JAF, Gonçalves PM, Gil MH, Guthrie JT (2009) Influence of physical-chemical interactions on the thermal stability and surface properties of poly(vinyl chloride)-b-poly(hydroxypropyl acrylate)-b-poly(vinyl chloride) block copolymers. Eur Polym J 45: 3389-3398.
83. Saint Flour C, Papirer E (1982) Gas solid chromatography: a method of measuring surface free energy characteristics of short glass fibers. 2. Through retention volumes measured near zero surface coverage. Ind Eng Chem Prod Res Dev 21: 666-669.
84. Saint Flour C, Papirer E (1983) Gas-solid chromatography: a quick method of estimating surface free energy variations induced by the treatment of short glass fibers. J Colloid Interface Sci 91: 69-75.
85. Santos JMRCA, Guthrie JT (2005) Analysis of interactions in multicomponent polymeric systems: the key-role of inverse gas chromatography. Mat Sci Eng R 50: 79-107.
86. Sasa B, Odon P, Stane S, Julijana K (2006) Analysis of surface properties of cellulose ethers and drug release from their matrix tablets. Eur J Pharm Sci 27: 375-383.
87. Schultz J, Lavielle L (1989) Interfacial properties of carbon-fiber epoxy matrix composites. In: Lloyd DR, Ward TC, Schreiber HP (eds) Inverse gas chromatography characterization of polymers and other materials, ACS symposium series, 391. American Chemical Society, Washington, pp 185-202.
88. Schultz J, Lavielle L, Martin C (1987) The role of the interface in carbon fibre-epoxy composites. J Adhesion 23: 45-60.
89. Shen Q (2009) Surface properties of cellulose and cellulose derivatives: a review. In: Roman M (ed) Model cellulosic surfaces, ACS symposium series, 1019. American Chemical Society, Washington, pp 259-289.
90. Shen W, Parker IH (1999) Surface composition and surface energetics of various eucalypt pulps. Cellulose 6: 41-55.
91. Shen W, Yao W, Li M, Parker I (1998a) Characterization of eucalypt fibre surface using inverse gas chromatography and X-ray photoelectron spectroscopy. Appita J 51(2): 147-151.
92. Shen W, Parker IH, Sheng YJ (1998b) The effects of surface extractives and lignin on the surface energy of eucalypt kraft pulp fibers. J Adhes Sci Technol 12: 161-174.
93. Shen W, Sheng YJ, Parker IH (1999) Comparison of the surface energetics data of eucalypt fibers and some polymers obtained by contact angle and inverse gas chromatography methods. J Adhes Sci Technol 13: 887-901.
94. Shen W, Filonanko Y, Truong Y, Parker IH, Brack N, Pigram P, Liesegang J (2000) Contact angle measurement and surface energetics of sized and unsized paper. Colloid Surf A 173: 117-126.
95. Siddiqui N, Mills RH, Gardner DJ, Bousfield D (2011) Production and characterization of cellulose nanofibers from wood pulp. J Adhes Sci Technol 25: 709-721.
96. Simonsen J, Hong Z, Rials TG (1997) The properties of the wood-polystyrene interphase determined by inverse gas chromatography. Wood Fiber Sci 29: 75-84.
97. Smidsrod O, Guillet JE (1969) Study of polymer-solute interactions by gas chromatography. Macromolecules 2: 272-277.
98. Steele DF, Moreton RC, Staniforth JN, Young PM, Tobyn MJ, Edge S (2008) Surface energy of microcrystalline cellulose determined by capillary intrusion and inverse gas chromatography. AAPS J 10: 494-503.
99. Tonoli GHD, Almeida AEFD, Pereira-da-Silva MA, Bassa A, Oyakawa D, Savastano H (2010) Surface properties of eucalyptus pulp fibres as reinforcement of cement-based composites. Holzforschung 64: 595-601.
100. Trejo-O′Reilly JA, Cavaille JY, Belgacem MN, Gandini A (1998) Surface energy and wettability of modified cellulosic fibres for use in composite materials. J Adhesion 67: 359-374.
101. Tshabalala MA (1997) Determination of the acid-base characteristics of lignocellulosic surfaces by inverse gas chromatography. J Appl Polym Sci 65: 1013-1020.
102. Tze WT, Gardner DJ (2001) Contact angle and IGC measurements for probing surface-chemical changes in the recycling of wood pulp fibers. J Adhes Sci Technol 15: 223-241.
103. Tze WTY, Gardner DJ, Tripp CP, O'Neill SC (2006a) Cellulose fiber/polymer adhesion: effects of fiber/matrix interfacial chemistry on the micromechanics of the interphase. J Adhes Sci Technol 20: 1649-1668.
104. Tze WTY, Walinder MEP, Gardner DJ (2006b) Inverse gas chromatography for studying interaction of materials used for cellulose fiber/polymer composites. J Adhes Sci Technol 20: 743-759.
105. Walinder MEP, Gardner DJ (2000) Surface energy of extracted and non-extracted Norway spruce wood particles studied by inverse gas chromatography (IGC). Wood Fiber Sci 32: 478-488.
106. Walinder MEP, Gardner DJ (2002) Acid-base characterization of wood and selected thermoplastics. J Adhes Sci Technol 16: 1625-1649.
107. Wang B, Sain M (2007) The effect of chemically coated nanofiber reinforcement on biopolymer based nanocomposites. Bioresources 2: 371-388.
108. Zafeiropoulos NE, Williams DR, Baillie CA, Matthews FL (2002) Engineering and characterisation of the interface in flax fibre/polypropylene composite materials. Part I. Development and investigation of surface treatments. Compos Part A Appl Sci 33: 1083-1093.