Review of bionanocomposite coating films and their applications

Polymers

Volumn 8, Issue 7, 2016, Pages

  Cader Mhd Haniffa, Mhd Abd ^a   Ching, Yern Chee ^a   Abdullah, Luqman Chuah ^b   Poh, Sin Chew ^a   Chuah, Cheng Hock ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

^b UNIVERSITY PUTRA MALAYSIA   (Malaysia)

Author keywords

Biodegradable polymers; Bionanocomposite; Coating film; Crosslink; Nanomaterials

Indexed keywords

BIODEGRADABLE POLYMERS; BIOMOLECULES; BIOPOLYMERS; COATINGS; CROSSLINKING; NANOCOMPOSITE FILMS; NANOSTRUCTURED MATERIALS; NANOTECHNOLOGY; NATURAL POLYMERS; ORGANIC MINERALS; ORGANIC POLYMERS;

BIO-BASED MATERIALS; BIO-NANOCOMPOSITE; COATING FILMS; CONSTITUENT MATERIALS; NANO-COMPOSITE COATING; NATURAL BIOPOLYMERS; ORGANIC NANOMATERIALS; SYNTHETIC BIODEGRADABLE POLYMERS;

PLASTIC COATINGS;

EID: 84982812649     PISSN: None     EISSN: 20734360     Source Type: Journal    
DOI: 10.3390/polym8070246     Document Type: Review

References (215)

1. Darder, M.; Aranda, P.; Ruiz-Hitzky, E. Bionanocomposites: A new concept of ecological, bioinspired, and functional hybrid materials. Adv. Mater. 2007, 19, 1309-1319.
2. Akintayo, C.O.; Akintayo, E.T.; Ziegler, T. Studies on newly developed urethane modified polyetheramide coatings from albizia benth oil. Prog. Org. Coat. 2011, 71, 89-97.
3. Chaudhari, A.; Anand, A.; Rajput, S.; Kulkarni, R.; Gite, V. Synthesis, characterization and application of Azadirachta indica juss (neem oil) fatty amides (AIJFA) based polyurethanes coatings: A renewable novel approach. Prog. Org. Coat. 2013, 76, 1779-1785.
4. Österberg, M.; Peresin, M.S.; Johansson, L.-S.; Tammelin, T. Clean and reactive nanostructured cellulose surface. Cellulose 2013, 20, 983-990.
5. Dufresne, A. Nanocellulose: A new ageless bionanomaterial. Mater. Today 2013, 16, 220-227.
6. Habibi, Y.; Lucia, L.A.; Rojas, O.J. Cellulose nanocrystals: Chemistry, self-assembly, and applications. Chem. Rev. 2010, 110, 3479-3500.
7. Alemdar, A.; Sain, M. Isolation and characterization of nanofibers from agricultural residues-Wheat straw and soy hulls. Bioresour. Technol. 2008, 99, 1664-1671.
8. Célino, A.; Fréour, S.; Jacquemin, F.; Casari, P. The hygroscopic behavior of plant fibers: A review. Front. Chem. 2013.
9. Tan, B.K.; Ching, Y.C.; Gan, S.N.; Shaifulazuar, R. Biodegradable mulches based on poly(vinyl alcohol), kenaf fiber, and urea. Bioresource 2015, 10, 5532-5543.
10. Tan, B.K.; Ching, Y.C.; Poh, S.C.; Luqman, C.A.; Gan, S.N. Review of natural fiber reinforced poly(vinyl alcohol) based composites: Application and opportunity. Polymers 2015, 7, 2205-2222.
11. Ershad, A.; Yong, K.C.; Ching, Y.C.; Chuah, C.H.; Liou, N.S. Effect of single and double stage chemically treated kenaf fibers on mechanical properties of polyvinyl alcohol film. Bioresource 2015, 10, 822-838.
12. Salminen, T.; Hippi, U.; Salminen, A. Method for the Preparation of NFC Films on Supports. U.S. Patents 20, 140, 255, 688, 11 September 2014.
13. Ching, Y.C.; Ng, T.S. Effect of preparation conditions on cellulose from oil palm empty fruit bunch fiber. Bioresource 2014, 9, 6373-6385.
14. Chiappone, A.; Nair, J.R.; Gerbaldi, C.; Zeno, E.; Bongiovanni, R. Cellulose/acrylate membranes for flexible lithium batteries electrolytes: Balancing improved interfacial integrity and ionic conductivity. Eur. Polym. J. 2014, 57, 22-29.
15. Valentini, L.; Bon, S.B.; Cardinali, M.; Fortunati, E.; Kenny, J.M. Cellulose nanocrystals thin films as gate dielectric for flexible organic field-effect transistors. Mater. Lett. 2014, 126, 55-58.
16. Sehaqui, H.; Liu, A.; Zhou, Q.; Berglund, L.A. Fast preparation procedure for large, flat cellulose and cellulose/inorganic nanopaper structures. Biomacromolecules 2010, 11, 2195-2198.
17. Gómez-Estaca, J.; Gómez-Guillén, M.; Fernández-Martín, F.; Montero, P. Effects of gelatin origin, bovine-hide and tuna-skin, on the properties of compound gelatin-chitosan films. Food Hydrocoll. 2011, 25, 1461-1469.
18. Xu, L.; Huang, Y.-A.; Zhu, Q.-J.; Ye, C. Chitosan in molecularly-imprinted polymers: Current and future prospects. Int. J. Mol. Sci. 2015, 16, 18328-18347.
19. Rinaudo, M. Chitin and chitosan: Properties and applications. Prog. Polym. Sci. 2006, 31, 603-632.
20. Rubentheren, V.; Thomas, W.; Ching, Y.C.; Praveena, N. Effects of heat treatment on chitosan nanocomposite film reinforced with nanocrystalline cellulose and tannic acid. Carbohydr. Polym. 2016, 140, 202-208.
21. Aider, M. Chitosan application for active bio-based films production and potential in the food industry: Review. LWT Food Sci. Technol. 2010, 43, 837-842.
22. Wang, S.; Shen, L.; Tong, Y.; Chen, L.; Phang, I.; Lim, P.; Liu, T. Biopolymer chitosan/montmorillonite nanocomposites: Preparation and characterization. Polym. Degrad. Stab. 2005, 90, 123-131.
23. Xu, Y.; Ren, X.; Hanna, M.A. Chitosan/clay nanocomposite film preparation and characterization. J. Appl. Polym. Sci. 2006, 99, 1684-1691.
24. Shchipunov, Y. Bionanocomposites: Green sustainable materials for the near future. Pure Appl. Chem. 2012, 84, 2579-2607.
25. Bourtoom, T.; Chinnan, M.S. Preparation and properties of rice starch-chitosan blend biodegradable film. LWT Food Sci. Technol. 2008, 41, 1633-1641.
26. Zhang, J.; Chen, X.G.; Li, Y.Y.; Liu, C.S. Self-assembled nanoparticles based on hydrophobically modified chitosan as carriers for doxorubicin. Nanomed. Nanotechnol. Biol. Med. 2007, 3, 258-265.
27. Shchipunov, Y.; Sarin, S.; Kim, I.; Ha, C.-S. Hydrogels formed through regulated self-organization of gradually charging chitosan in solution of xanthan. Green Chem. 2010, 12, 1187-1195.
28. Saad, R.; Hawari, J. Grafting of lignin onto nanostructured silica sba-15: Preparation and characterization. J. Porous Mater. 2013, 20, 227-233.
29. Lora, J.H.; Glasser, W.G. Recent industrial applications of lignin: A sustainable alternative to nonrenewable materials. J. Polym. Environ. 2002, 10, 39-48.
30. Leplé, J.-C.; Dauwe, R.; Morreel, K.; Storme, V.; Lapierre, C.; Pollet, B.; Naumann, A.; Kang, K.-Y.; Kim, H.; Ruel, K. Downregulation of cinnamoyl-coenzyme a reductase in poplar: Multiple-level phenotyping reveals effects on cell wall polymer metabolism and structure. Plant Cell 2007, 19, 3669-3691.
31. Hambardzumyan, A.; Foulon, L.; Chabbert, B.; Aguié-Béghin, V.R. Natural organic UV-absorbent coatings based on cellulose and lignin: Designed effects on spectroscopic properties. Biomacromolecules 2012, 13, 4081-4088.
32. Kim, Y.S.; Kadla, J.F. Preparation of a thermoresponsive lignin-based biomaterial through atom transfer radical polymerization. Biomacromolecules 2010, 11, 981-988.
33. Jiang, L.; Ma, C.; Zhang, M.-H.; Zhang, X. The graft polymers from different species of lignin and acrylic acid: Synthesis and mechanism study. Int. J. Biol. Macromol. 2014, 63, 43-48.
34. Chen, L.; Ni, Y.; Bian, X.; Qiu, X.; Zhuang, X.; Chen, X.; Jing, X. A novel approach to grafting polymerization of "-caprolactone onto starch granules. Carbohydr. Polym. 2005, 60, 103-109.
35. Chung, Y.-L.; Olsson, J.V.; Li, R.J.; Frank, C.W.;Waymouth, R.M.; Billington, S.L.; Sattely, E.S. A renewable lignin-lactide copolymer and application in biobased composites. ACS Sustain. Chem. Eng. 2013, 1, 1231-1238.
36. Laurichesse, S.; Avérous, L. Synthesis, thermal properties, rheological and mechanical behaviors of lignins-grafted-poly("-caprolactone). Polymer 2013, 54, 3882-3890.
37. Abdollahi, M.; Rezaei, M.; Farzi, G. A novel active bionanocomposite film incorporating rosemary essential oil and nanoclay into chitosan. J. Food Eng. 2012, 111, 343-350.
38. Saha, B.C.; Bothast, R.J. Starch conversion by amylases fromaureobasidium pullulans. J. Ind. Microbiol. 1993, 12, 413-416.
39. Catley, B.J.; Ramsay, A.; Servis, C. Observations on the structure of the fungal extracellular polysaccharide, pullulan. Carbohydr. Res. 1986, 153, 79-86.
40. Leathers, T.D. Substrate regulation and specificity of amylases from Aureobasidium strain NRRL Y-12, 974. FEMS Microbiol. Lett. 1993, 110, 217-221.
41. Leathers, T.D. Biotechnological production and applications of pullulan. Appl. Microbiol. Biotechnol. 2003, 62, 468-473.
42. Yuen, K.K. The two-sample trimmed t for unequal population variances. Biometrika 1974, 61, 165-170.
43. McNeil, B.; Kristiansen, B. Temperature effects on polysaccharide formation by aureobasidium pullulans in stirred tanks. Enzym. Microb. Technol. 1990, 12, 521-526.
44. Maltsev, V.A.; Wobus, A.M.; Rohwedel, J.; Bader, M.; Hescheler, J. Cardiomyocytes differentiated in vitro from embryonic stem cells developmentally express cardiac-specific genes and ionic currents. Circ. Res. 1994, 75, 233-244.
45. Fujita, F.; Fukami, K.; Fujimoto, M. Pullulan Aminoalkyl Ether. U.S. Patents 4, 167, 623, 11 September 1979.
46. Kato, K.; Shiosaka, M. Hydrogenated Pullulan. U.S. Patents 3, 931, 146, 6 January 1976.
47. Tsuji, K.; Fujimoto, M.; Masuko, F.; Nagase, T. Carboxylated Pullulan and Method for Producing Same. U.S. Patents 4, 090, 016, 16 May 1978.
48. Hijiya, H.; Shiosaka, M. Shaped Bodies of Pullulan and Their Use. U.S. Patents 3, 784, 390, 8 January 1974.
49. Bruneel, D.; Schacht, E. Chemical modification of pullulan: 1. Periodate oxidation. Polymer 1993, 34, 2628-2632.
50. Shibata, M.; Asahina, M.; Teramoto, N.; Yosomiya, R. Chemical modification of pullulan by isocyanate compounds. Polymer 2001, 42, 59-64.
51. Hasuda, H.; Kwon, O.H.; Kang, I.-K.; Ito, Y. Synthesis of photoreactive pullulan for surface modification. Biomaterials 2005, 26, 2401-2406.
52. Kuroda, K.; Fujimoto, K.; Sunamoto, J.; Akiyoshi, K. Hierarchical self-assembly of hydrophobically modified pullulan in water: Gelation by networks of nanoparticles. Langmuir 2002, 18, 3780-3786.
53. Fernandes, S.C.; Sadocco, P.; Causio, J.; Silvestre, A.J.; Mondragon, I.; Freire, C.S. Antimicrobial pullulan derivative prepared by grafting with 3-aminopropyltrimethoxysilane: Characterization and ability to form transparent films. Food Hydrocoll. 2014, 35, 247-252.
54. Na, K.; Lee, T.B.; Park, K.-H.; Shin, E.-K.; Lee, Y.-B.; Choi, H.-K. Self-assembled nanoparticles of hydrophobically-modified polysaccharide bearing vitamin h as a targeted anti-cancer drug delivery system. Eur. J. Pharm. Sci. 2003, 18, 165-173.
55. Introzzi, L. Development of High Performance Biopolymer Coatings for Food Packaging Applications. Ph.D. Thesis, University of Milan, Milan, Italy, 2012.
56. Trovatti, E.; Fernandes, S.C.; Rubatat, L.; Freire, C.S.; Silvestre, A.J.; Neto, C.P. Sustainable nanocomposite films based on bacterial cellulose and pullulan. Cellulose 2012, 19, 729-737.
57. Pinto, R.J.; Almeida, A.; Fernandes, S.C.; Freire, C.S.; Silvestre, A.J.; Neto, C.P.; Trindade, T. Antifungal activity of transparent nanocomposite thin films of pullulan and silver against Aspergillus niger. Colloids Surf. B Biointerfaces 2013, 103, 143-148.
58. Coseri, S.; Spatareanu, A.; Sacarescu, L.; Rimbu, C.; Suteu, D.; Spirk, S.; Harabagiu, V. Green synthesis of the silver nanoparticles mediated by pullulan and 6-carboxypullulan. Carbohydr. Polym. 2015, 116, 9-17.
59. Reddy, C.; Ghai, R.; Kalia, V.C. Polyhydroxyalkanoates: An overview. Bioresour. Technol. 2003, 87, 137-146.
60. Anderson, A.J.; Dawes, E.A. Occurrence, metabolism, metabolic role, and industrial uses of bacterial polyhydroxyalkanoates. Microbiol. Rev. 1990, 54, 450-472.
61. Kai, D.; Loh, X.J. Polyhydroxyalkanoates: Chemical modifications toward biomedical applications. ACS Sustain. Chem. Eng. 2013, 2, 106-119.
62. Chen, G.-Q.; Wu, Q. The application of polyhydroxyalkanoates as tissue engineering materials. Biomaterials 2005, 26, 6565-6578.
63. Crétois, R.; Delbreilh, L.; Dargent, E.; Follain, N.; Lebrun, L.; Saiter, J. Dielectric relaxations in polyhydroxyalkanoates/organoclay nanocomposites. Eur. Polym. J. 2013, 49, 3434-3444.
64. Yun, S.I.; Gadd, G.E.; Latella, B.A.; Lo, V.; Russell, R.A.; Holden, P.J. Mechanical properties of biodegradable polyhydroxyalkanoates/single wall carbon nanotube nanocomposite films. Polym. Bull. 2008, 61, 267-275.
65. Kim, Y.B.; Rhee, Y.H. Evaluation of various carbon substrates for the biosynthesis of polyhydroxyalkanoates bearing functional groups by Pseudomonas putida. Int. J. Biol. Macromol. 2000, 28, 23-29.
66. Timbart, L.; Renard, E.; Tessier, M.; Langlois, V. Monohydroxylated poly(3-hydroxyoctanoate) oligomers and its functionalized derivatives used as macroinitiators in the synthesis of degradable diblock copolyesters. Biomacromolecules 2007, 8, 1255-1265.
67. Saad, G.R.; Lee, Y.; Seliger, H. Synthesis and thermal properties of biodegradable poly(ester-urethane)s based on chemo-synthetic poly[(R, S)-3-hydroxybutyrate]. Macromol. Biosci. 2001, 1, 91-99.
68. Hirt, T.D.; Neuenschwander, P.; Suter, U.W. Telechelic diols from poly[(R)-3-hydroxybutyric acid] and poly([(R)-3-hydroxybutyric acid]-co-[(R)-3-hydroxyvaleric acid]). Macromol. Chem. Phys. 1996, 197, 1609-1614.
69. Zhou, L.; Chen, Z.; Chi, W.; Yang, X.; Wang, W.; Zhang, B. Mono-methoxy-poly(3-hydroxybutyrateco-4-hydroxybutyrate)-graft-hyper-branched polyethylenimine copolymers for sirna delivery. Biomaterials 2012, 33, 2334-2344.
70. Stigers, D.J.; Tew, G.N. Poly(3-hydroxyalkanoate)s functionalized with carboxylic acid groups in the side chain. Biomacromolecules 2003, 4, 193-195.
71. Park, W.H.; Lenz, R.W.; Goodwin, S. Epoxidation of bacterial polyesters with unsaturated side chains. II. Rate of epoxidation and polymer properties. J. Polym. Sci. Part A Polym. Chem. 1998, 36, 2381-2387.
72. Pan, J.; Li, G.; Chen, Z.; Chen, X.; Zhu, W.; Xu, K. Alternative block polyurethanes based on poly(3-hydroxybutyrate-co-4-hydroxybutyrate) and poly(ethylene glycol). Biomaterials 2009, 30, 2975-2984.
73. Chen, D.; Tang, C.; Chan, K.; Tsui, C.; Peter, H.; Leung, M.C.; Uskokovic, P. Dynamic mechanical properties and in vitro bioactivity of PHBHV/HA nanocomposite. Compos. Sci. Technol. 2007, 67, 1617-1626.
74. Lee, S.; Lee, M.; Song, K. Effect of-irradiation on the physicochemical properties of gluten films. Food Chem. 2005, 92, 621-625.
75. Cuq, B.; Gontard, N.; Guilbert, S. Proteins as agricultural polymers for packaging production. Cereal Chem. 1998, 75, 1-9.
76. Miller, K.; Krochta, J. Oxygen and aroma barrier properties of edible films: A review. Trends Food Sci. Technol. 1997, 8, 228-237.
77. Narayan, R.J.; Kumta, P.N.; Sfeir, C.; Lee, D.-H.; Choi, D.; Olton, D. Nanostructured ceramics in medical devices: Applications and prospects. JOM 2004, 56, 38-43.
78. Ikada, Y. Surface modification of polymers for medical applications. Biomaterials 1994, 15, 725-736.
79. Lee, C.H.; Singla, A.; Lee, Y. Biomedical applications of collagen. Int. J. Pharm. 2001, 221, 1-22.
80. Fallas, J.A.; O'Leary, L.E.; Hartgerink, J.D. Synthetic collagen mimics: Self-assembly of homotrimers, heterotrimers and higher order structures. Chem. Soc. Rev. 2010, 39, 3510-3527.
81. Veronese, F.; Largajolli, R.; Boccu, E.; Benassi, C.; Schiavon, O. Surface modification of proteins activation of monomethoxy-polyethylene glycols by phenylchloroformates and modification of ribonuclease and superoxide dismutase. Appl. Biochem. Biotechnol. 1985, 11, 141-152.
82. Sothornvit, R.; Krochta, J.M. Plasticisers in edible films and coatings. In Innovations in Food Packaging; Han, J.H., Ed.; Elsevier Publishers: New York, NY, USA, 2005; pp. 403-428.
83. 2/whey protein isolate nanocomposite film. Food Hydrocoll. 2011, 25, 1098-1104.
84. Tian, H.; Liu, D.; Zhang, L. Structure and properties of soy protein films plasticized with hydroxyamine. J. Appl. Polym. Sci. 2009, 111, 1549-1556.
85. Kumar, P.; Sandeep, K.; Alavi, S.; Truong, V.-D.; Gorga, R.E. Preparation and characterization of bio-nanocomposite films based on soy protein isolate and montmorillonite using melt extrusion. J. Food Eng. 2010, 100, 480-489.
86. Rissa, K.; Lepistö, T.; Yrjölä, K. Effect of kaolin content on structure and functional properties of water-based coatings. Prog. Org. Coat. 2006, 55, 137-141.
87. Teng, S.-H.; Lee, E.-J.; Park, C.-S.; Choi, W.-Y.; Shin, D.-S.; Kim, H.-E. Bioactive nanocomposite coatings of collagen/hydroxyapatite on titanium substrates. J. Mater. Sci. Mater. Med. 2008, 19, 2453-2461.
88. Bae, H.J. Fish Gelatin-Nanoclay Composite Film. Mechanical and Physical Properties, Effect of Enzyme Cross-Linking, and as a Functional Film Layer; ProQuest: Clemson, SC, USA, 2007.
89. Chen, Y.-C.; Yu, H.-C.; Huang, C.-Y.; Chung, W.-L.; Wu, S.-L.; Su, Y.-K. Nonvolatile bio-memristor fabricated with egg albumen film. Sci. Rep. 2015.
90. Rodríguez-González, C.; Martínez-Hernández, A.L.; Castaño, V.M.; Kharissova, O.V.; Ruoff, R.S.; Velasco-Santos, C. Polysaccharide nanocomposites reinforced with graphene oxide and keratin-grafted graphene oxide. Ind. Eng. Chem. Res. 2012, 51, 3619-3629.
91. Chandra, R.; Rustgi, R. Biodegradable polymers. Prog. Polym. Sci. 1998, 23, 1273-1335.
92. Middleton, J.C.; Tipton, A.J. Synthetic biodegradable polymers as orthopedic devices. Biomaterials 2000, 21, 2335-2346.
93. Gunatillake, P.; Mayadunne, R.; Adhikari, R. Recent developments in biodegradable synthetic polymers. Biotechnol. Annu. Rev. 2006, 12, 301-347.
94. Maharana, T.; Mohanty, B.; Negi, Y. Melt-solid polycondensation of lactic acid and its biodegradability. Prog. Polym. Sci. 2009, 34, 99-124.
95. Vroman, I.; Tighzert, L. Biodegradable polymers. Materials 2009, 2, 307-344.
96. Lendlein, A. Polymere als implantatwerkstoffe. Chem. Unserer Zeit 1999, 33, 279-295.
97. Miller, R.A.; Brady, J.M.; Cutright, D.E. Degradation rates of oral resorbable implants (polylactates and polyglycolates): Rate modification with changes in PLA/PGA copolymer ratios. J. Biomed. Mater. Res. 1977, 11, 711-719.
98. Chen, C.; Yang, C.; Chen, M.; Shih, Y.; Hsu, H.; Lu, S. Synthesis and characterization of novel poly(butylene succinate-co-2-methyl-1, 3-propylene succinate)s. Exp. Polym. Lett. 2011, 5, 284-294.
99. Lin, C.-S.; Shih, Y.-F.; Jeng, R.-J.; Dai, S.A.; Lin, J.-J.; Lee, C.-C. Nanocomposites with enhanced electrical properties based on biodegradable poly(butylene succinate) and polyetheramine modified carbon nanotube. J. Taiwan Inst. Chem. Eng. 2012, 43, 322-328.
100. Steeves, D.M.; Farrell, R.; Ratto, J.A. Investigation of polybutylene succinate-co-adipate (PBSA)/montmorillonite layered silicate (MLS) melt-processed nanocomposites. J. Biobased Mater. Bioenergy 2007, 1, 94-108.
101. Ramaraj, B. Crosslinked poly(vinyl alcohol) and starch composite films. II. Physicomechanical, thermal properties and swelling studies. J. Appl. Polym. Sci. 2007, 103, 909-916.
102. Yan, Y.; Glover, S.; Jameson, G.; Biggs, S. The flocculation efficiency of polydisperse polymer flocculants. Int. J. Miner. Proc. 2004, 73, 161-175.
103. 4nanocomposites embedded polyvinyl alcohol/sodium alginate beads for chromium (VI) removal. J. Hazard. Mater. 2013, 262, 748-758.
104. Ismail, E.A.; Motawie, A.; Sadek, E. Synthesis and characterization of polyurethane coatings based on soybean oil-polyester polyols. Egypt. J. Pet. 2011, 20, 1-8.
105. Ching, Y.C.; Iskander, I.Y. Effect of polyurethane/nanosilica composites coating on thermo-mechanical properties of polyethylene film. Mater. Technol. 2012, 27, 113-115.
106. Ching, Y.C.; Chen, Y.C.; Iskandar, I.Y. Mechanical properties changes of nanosilica filled solventborne polyamide binder after accelerated weathering exposure weathering. Adv. Sci. Lett. 2012, 13, 575-578.
107. Caillol, S.; Desroches, M.; Boutevin, G.; Loubat, C.; Auvergne, R.; Boutevin, B. Synthesis of new polyester polyols from epoxidized vegetable oils and biobased acids. Eur. J. Lipid Sci. Technol. 2012, 114, 1447-1459.
108. Rozman, H.; Yeo, Y.; Tay, G.; Abubakar, A. The mechanical and physical properties of polyurethane composites based on rice husk and polyethylene glycol. Polym. Test. 2003, 22, 617-623.
109. Velayutham, T.S.; Majid, W.A.; Ahmad, A.; Kang, G.Y.; Gan, S. Synthesis and characterization of polyurethane coatings derived from polyols synthesized with glycerol, phthalic anhydride and oleic acid. Prog. Org. Coat. 2009, 66, 367-371.
110. Lee, A. Synthesis of polyurethane from one hundred percent sustainable natural materials through non-isocyanate reactions. Master's Thesis, Georgia Institute of Technology, Atlanta, GA, USA, 2014.
111. Lalevée, J.; Mokbel, H.; Fouassier, J.-P. Recent developments of versatile photoinitiating systems for cationic ring opening polymerization operating at any wavelengths and under low light intensity sources. Molecules 2015, 20, 7201-7221.
112. Liu, N.-I. Linear Low Density Polyethylene Impact Modifier for Thermoplastic Polyesters. U.S. Patents 4, 476, 274, 9 October 1984.
113. Jiang, Y.; Song, Y.; Miao, M.; Cao, S.; Feng, X.; Fang, J.; Shi, L. Transparent nanocellulose hybrid films functionalized with ZnO nanostructures for UV-blocking. J. Mater. Chem. C 2015, 3, 6717-6724.
114. Shchipunov, Y.A.; Sarin, S.; Silant'ev, V.; Postnova, I. Self-organization in the chitosan-clay nanoparticles system regulated through polysaccharide macromolecule charging. 2. Films. Colloid J. 2012, 74, 636-644.
115. Habibi, Y.; Hoeger, I.; Kelley, S.S.; Rojas, O.J. Development of langmuir-schaeffer cellulose nanocrystal monolayers and their interfacial behaviors. Langmuir 2009, 26, 990-1001.
116. De Mesquita, J.P.; Donnici, C.L.; Pereira, F.V. Biobased nanocomposites from layer-by-layer assembly of cellulose nanowhiskers with chitosan. Biomacromolecules 2010, 11, 473-480.
117. Cranston, E.D.; Gray, D.G. Morphological and optical characterization of polyelectrolyte multilayers incorporating nanocrystalline cellulose. Biomacromolecules 2006, 7, 2522-2530.
118. Czaja, W.; Romanovicz, D.; Malcolm Brown, R. Structural investigations of microbial cellulose produced in stationary and agitated culture. Cellulose 2004, 11, 403-411.
119. Shi, Z.; Zhang, Y.; Phillips, G.O.; Yang, G. Utilization of bacterial cellulose in food. Food Hydrocoll. 2014, 35, 539-545.
120. Fortunati, E.; Puglia, D.; Luzi, F.; Santulli, C.; Kenny, J.M.; Torre, L. Binary PVA bio-nanocomposites containing cellulose nanocrystals extracted from different natural sources: Part I. Carbohydr. Polym. 2013, 97, 825-836.
121. Podsiadlo, P.; Sui, L.; Elkasabi, Y.; Burgardt, P.; Lee, J.; Miryala, A.; Kusumaatmaja, W.; Carman, M.R.; Shtein, M.; Kieffer, J. Layer-by-layer assembled films of cellulose nanowires with antireflective properties. Langmuir 2007, 23, 7901-7906.
122. Wang, X.; Yang, K.; Tao, S.; Xing, B. Sorption of aromatic organic contaminants by biopolymers: Effects of pH, copper (II) complexation, and cellulose coating. Environ. Sci. Technol. 2007, 41, 185-191.
123. Juntaro, J.; Pommet, M.; Kalinka, G.; Mantalaris, A.; Shaffer, M.S.; Bismarck, A. Creating hierarchical structures in renewable composites by attaching bacterial cellulose onto sisal fibers. Adv. Mater. 2008, 20, 3122-3126.
124. Mohr, G.J. Polymers for optical sensors. In Optical Chemical Sensors; Springer: Dordrecht, The Netherlands, 2006; pp. 297-321.
125. Shukla, S. Synthesis of polyaniline grafted cellulose suitable for humidity sensing. Indian J. Eng. Mater. Sci. 2012, 19, 417-420.
126. Choh, J.L.; Ching, Y.C.; Gan, S.N.; Shaifulazuar, R.; Sabariah, J. Effects of oil palm empty fruit bunch fiber on electrical and mechanical properties of conductive filler reinforced polymer composite. Bioresource 2016, 11, 913-928.
127. Peltzer, M.; Pei, A.; Zhou, Q.; Berglund, L.; Jiménez, A. Surface modification of cellulose nanocrystals by grafting with poly(lactic acid). Polym. Int. 2014, 63, 1056-1062.
128. Missoum, K.; Belgacem, M.N.; Barnes, J.-P.; Brochier-Salon, M.-C.; Bras, J. Nanofibrillated cellulose surface grafting in ionic liquid. Soft Matter 2012, 8, 8338-8349.
129. Kutowy, O.; Sourirajan, S. Cellulose acetate ultrafiltration membranes. J. Appl. Polym. Sci. 1975, 19, 1449-1460.
130. Han, B.; Zhang, D.; Shao, Z.; Kong, L.; Lv, S. Preparation and characterization of cellulose acetate/carboxymethyl cellulose acetate blend ultrafiltration membranes. Desalination 2013, 311, 80-89.
131. Koseoglu-Imer, D.Y.; Dizge, N.; Koyuncu, I. Enzymatic activation of cellulose acetate membrane for reducing of protein fouling. Colloids Surf. B Biointerfaces 2012, 92, 334-339.
132. Vardanyan, V.; Galstian, T.; Riedl, B. Characterization of cellulose nanocrystals dispersion in varnishes by backscattering of laser light. J. Coat. Technol. Res. 2015, 12, 647-656.
133. Haag, H.F. Low-VOC waterborne coatings for wood based on nitrocellulose-acrylic latex. JCT 1992, 64, 19-26.
134. Clasen, C.; Kulicke, W.-M. Determination of viscoelastic and rheo-optical material functions of water-soluble cellulose derivatives. Prog. Polym. Sci. 2001, 26, 1839-1919.
135. Ortega-Toro, R.; Jiménez, A.; Talens, P.; Chiralt, A. Properties of starch-hydroxypropyl methylcellulose based films obtained by compression molding. Carbohydr. Polym. 2014, 109, 155-165.
136. Ching, Y.C.; Md. Ershad, A.; Luqman, C.A.; Choo, K.W.; Yong, C.K.; Sabariah, J.J.; Chuah, C.H.; Liou, N.S. Rheological properties of cellulose nanocrystal-embedded polymer composites: A review. Cellulose 2016, 23, 1011-1030.
137. Goh, K.Y.; Ching, Y.C.; Chuah, C.H.; Luqman, C.A.; Liou, N.S. Individualization of microfibrillated celluloses from oil palm empty fruit bunch: Comparative studies between acid hydrolysis and ammonium persulfate oxidation. Cellulose 2016, 23, 379-390.
138. Arrieta, M.P.; Fortunati, E.; Dominici, F.; López, J.; Kenny, J.M. Bionanocomposite films based on plasticized PLA-PHB/cellulose nanocrystal blends. Carbohydr. Polym. 2015, 121, 265-275.
139. Chen, G.; Liu, B.; Zhang, B. Characterization of composite hydrocolloid film based on sodium cellulose sulfate and cassava starch. J. Food Eng. 2014, 125, 105-111.
140. Pilla, S. Engineering applications of bioplastics and biocomposites-An overview. In Handbook of Bioplastics and Biocomposites Engineering Applications; Scrivener Publishing: Salem, MA, USA, 2011; pp. 1-15.
141. Chillo, S.; Flores, S.; Mastromatteo, M.; Conte, A.; Gerschenson, L.; del Nobile, M. Influence of glycerol and chitosan on tapioca starch-based edible film properties. J. Food Eng. 2008, 88, 159-168.
142. Duan, H.; Shao, Z.; Zhao, M.; Zhou, Z. Preparation and properties of environmental-friendly coatings based on carboxymethyl cellulose nitrate ester and modified alkyd. Carbohydr. Polym. 2016, 137, 92-99.
143. Kim, H.W.; Li, L.H.; Lee, E.J.; Lee, S.H.; Kim, H.E. Fibrillar assembly and stability of collagen coating on titanium for improved osteoblast responses. J. Biomed. Mater. Res. A 2005, 75, 629-638.
144. Rammelt, S.; Illert, T.; Bierbaum, S.; Scharnweber, D.; Zwipp, H.; Schneiders, W. Coating of titanium implants with collagen, RGD peptide and chondroitin sulfate. Biomaterials 2006, 27, 5561-5571.
145. Morra, M.; Cassinelli, C.; Meda, L.; Fini, M.; Giavaresi, G.; Giardino, R. Surface analysis and effects on interfacial bone microhardness of collagen-coated titanium implants: A rabbit model. Int. J. Oral Maxillofac. Implant. 2005, 20, 23-30.
146. Rubin, A.L.; Stenzel, K.H.; Miyata, T.; White, M.J.; Dunn, M. Collagen as a vehicle for drug delivery. J. Clin. Pharmacol. New Drugs 1973, 13, 309-312.
147. Murata, M.; Maki, F.; Sato, D.; Shibata, T.; Arisue, M. Bone augmentation by onlay implant using recombinant human BMP-2 and collagen on adult rat skull without periosteum. Clin. Oral Implant. Res. 2000, 11, 289-295.
148. Nakagawa, T.; Tagawa, T. Ultrastructural study of direct bone formation induced by BMPs-collagen complex implanted into an ectopic site. Oral Dis. 2000, 6, 172-179.
149. Liu, H.-W.; Ofosu, F.A.; Chang, P.L. Expression of human factor IX by microencapsulated recombinant fibroblasts. Hum. Gene Ther. 1993, 4, 291-301.
150. Sato, H.; Kitazawa, H.; Adachi, I.; Horikoshi, I. Microdialysis assessment of microfibrous collagen containing a P-glycoprotein-mediated transport inhibitor, cyclosporine A, for local delivery of etoposide. Pharm. Res. 1996, 13, 1565-1569.
151. Vardaxis, N.; Boon, M.; Ruijgrok, J. Calcification of cross-linked collagen-elastin membrane implants in vivo and their proposed use in bone regeneration. Biomaterials 1996, 17, 1489-1497.
152. Meaney, D.F. Mechanical properties of implantable biomaterials. Clin. Podiatr. Med. Surg. 1995, 12, 363-384.
153. Koide, M.; Osaki, K.; Konishi, J.; Oyamada, K.; Katakura, T.; Takahashi, A.; Yoshizato, K. A new type of biomaterial for artificial skin: Dehydrothermally cross-linked composites of fibrillar and denatured collagens. J. Biomed. Mater. Res. 1993, 27, 79-87.
154. Chen, G.-Q.; Wu, Q. Microbial production and applications of chiral hydroxyalkanoates. Appl. Microbiol. Biotechnol. 2005, 67, 592-599.
155. Williams, S.F.; Martin, D.P.; Horowitz, D.M.; Peoples, O.P. PHA applications: Addressing the price performance issue: I. Tissue engineering. Int. J. Biol. Macromol. 1999, 25, 111-121.
156. Na, K.; Shin, D.; Yun, K.; Park, K.-H.; Lee, K.C. Conjugation of heparin into carboxylated pullulan derivatives as an extracellular matrix for endothelial cell culture. Biotechnol. Lett. 2003, 25, 381-385.
157. Suzuki, S.; Kawai, K.; Ashoori, F.; Morimoto, N.; Nishimura, Y.; Ikada, Y. Long-term follow-up study of artificial dermis composed of outer silicone layerand inner collagen sponge. Br. J. Plast. Surg. 2000, 53, 659-666.
158. Liu, M.; Zhang, Y.; Wu, C.; Xiong, S.; Zhou, C. Chitosan/halloysite nanotubes bionanocomposites: Structure, mechanical properties and biocompatibility. Int. J. Biol. Macromol. 2012, 51, 566-575.
159. Kim, S.-K.; Sudha, P.; Aisverya, S.; Rose, M.H.; Venkatesan, J. Bionanocomposites of chitosan for multitissue engineering applications. In Chitin and Chitosan Derivatives: Advances in Drug Discovery and Developments; CRC Press: Boca Raton, FL, USA, 2013; pp. 451-462.
160. Hajiali, H.; Karbasi, S.; Hosseinalipour, M.; Rezaie, H.R. Preparation of a novel biodegradable nanocomposite scaffold based on poly(3-hydroxybutyrate)/bioglass nanoparticles for bone tissue engineering. J. Mater. Sci. Mater. Med. 2010, 21, 2125-2132.
161. Okamoto, M.; John, B. Synthetic biopolymer nanocomposites for tissue engineering scaffolds. Prog. Polym. Sci. 2013, 38, 1487-1503.
162. Gábor, K.; Gyula, K. The examination of the role of natural substances in the protection against UV radiation. Hadmérnök 2013, 8, 339-344.
163. Dupont, E.; Gomez, J.; Bilodeau, D. Beyond UV radiation: A skin under challenge. Int. J. Cosmet. Sci. 2013, 35, 224-232.
164. Gupta, D. UV absorbing properties of some plant derived extracts. Res. J. Chem. Environ. Sci. 2013, 1, 34-36.
165. Saravanan, D. UV protection textile materials. AUTEX Res. J. 2007, 7, 53-62.
166. Smith, G.J.; Miller, I.J.; Clare, J.F.; Diffey, B.L. The effect of UV absorbing sunscreens on the reflectance and the consequent protection of skin. Photochem. Photobiol. 2002, 75, 122-125.
167. Morgan, A.B.; Antonucci, J.M.; VanLandingham, M.R.; Harris, R.; Kashiwagi, T. Thermal and flammability properties of a silica-PMMA nanocomposite. Polym. Mater. Sci. Eng. Wash. 2000, 83, 57-58.
168. Chee, C.Y.; Yaacob, I.I. Weathering effect on PE coated with thin layer of PU/nanosilica composite. Adv. Mater. Res. 2011.
169. Mao, Z.; Shi, Q.; Zhang, L.; Cao, H. The formation and UV-blocking property of needle-shaped ZnO nanorod on cotton fabric. Thin Solid Films 2009, 517, 2681-2686.
170. Song, Q.; Winter, W.T.; Bujanovic, B.M.; Amidon, T.E. Nanofibrillated cellulose (NFC): A high-value co-product that improves the economics of cellulosic ethanol production. Energies 2014, 7, 607-618.
171. Sarkar, A.K.; Appidi, S. Single bath process for imparting antimicrobial activity and ultraviolet protective property to bamboo viscose fabric. Cellulose 2009, 16, 923-928.
172. Hoareau, W.; Oliveira, F.B.; Grelier, S.; Siegmund, B.; Frollini, E.; Castellan, A. Fiberboards based on sugarcane bagasse lignin and fibers. Macromol. Mater. Eng. 2006, 291, 829-839.
173. Cerrutti, B.; de Souza, C.; Castellan, A.; Ruggiero, R.; Frollini, E. Carboxymethyl lignin as stabilizing agent in aqueous ceramic suspensions. Ind. Crops Prod. 2012, 36, 108-115.
174. Binder, J.B.; Raines, R.T. Simple chemical transformation of lignocellulosic biomass into furans for fuels and chemicals. J. Am. Chem. Soc. 2009, 131, 1979-1985.
175. Nemoto, T.; Konishi, G.-I.; Tojo, Y.; Funaoka, M. Development of lignin as a transparent resin: Evaluation of thermal and optical properties of alkoxylated lignophenols. Polym. J. 2010, 42, 896-900.
176. Ibn Yaich, A.; Edlund, U.; Albertsson, A.-C. Wood hydrolysate barriers: Performance controlled via selective recovery. Biomacromolecules 2012, 13, 466-473.
177. Bauer, S.; Arpa-Sancet, M.P.; Finlay, J.A.; Callow, M.E.; Callow, J.A.; Rosenhahn, A. Adhesion of marine fouling organisms on hydrophilic and amphiphilic polysaccharides. Langmuir 2013, 29, 4039-4047.
178. Findenig, G.; Kargl, R.; Stana-Kleinschek, K.; Ribitsch, V. Interaction and structure in polyelectrolyte/clay multilayers: A QCM-D study. Langmuir 2013, 29, 8544-8553.
179. Lajimi, R.H.; Ferjani, E.; Roudesli, M.S.; Deratani, A. Effect of LBL surface modification on characteristics and performances of cellulose acetate nanofiltration membranes. Desalination 2011, 266, 78-86.
180. Jeyachandran, Y.; Mielczarski, E.; Rai, B.; Mielczarski, J. Quantitative and qualitative evaluation of adsorption/desorption of bovine serum albumin on hydrophilic and hydrophobic surfaces. Langmuir 2009, 25, 11614-11620.
181. Arora, A.; Padua, G. Review: Nanocomposites in food packaging. J. Food Sci. 2010, 75, R43-R49.
182. Yee, Y.Y.; Ching, Y.C.; Shaifulazuar, R.; Awanis, H.; Ramesh, S. Preparation and characterization of poly(lactic acid) based composite reinforced with oil palm empty fruit bunch film and nanosilica. Bioresource 2016, 11, 2269-2286.
183. Burdock, G.A. Safety assessment of hydroxypropyl methylcellulose as a food ingredient. Food Chem. Toxicol. 2007, 45, 2341-2351.
184. Yu, J.; Cui, G.; Wei, M.; Huang, J. Facile exfoliation of rectorite nanoplatelets in soy protein matrix and reinforced bionanocomposites thereof. J. Appl. Polym. Sci. 2007, 104, 3367-3377.
185. Panaitescu, D.M. ,Frone, A.N.,Chiulan, I., "Nanostructured biocomposites from aliphatic polyesters and bacterial cellulose" in Industrial Crops and Products Volume 93, 25 December 2016, Pages 251-266
186. Song, Z. Enhancing Moisture Barrier and Grease Resistance of Paper for Green-Based Packaging Materials. Ph.D. Thesis, University of New Brunswick, Saint John, NB, Canada, 2014.
187. Alves, V.D.; Costa, N.; Coelhoso, I.M. Barrier properties of biodegradable composite films based on κ-carrageenan/pectin blends and mica flakes. Carbohydr. Polym. 2010, 79, 269-276.
188. Liu, A.; Berglund, L.A. Clay nanopaper composites of nacre-like structure based on montmorrilonite and cellulose nanofibers-Improvements due to chitosan addition. Carbohydr. Polym. 2012, 87, 53-60.
189. Andersson, C. New ways to enhance the functionality of paperboard by surface treatment-A review. Packag. Technol. Sci. 2008, 21, 339-373.
190. Bordenave, N.; Grelier, S.; Coma, V. Hydrophobization and antimicrobial activity of chitosan and paper-based packaging material. Biomacromolecules 2009, 11, 88-96.
191. Lu, P.; Xiao, H.; Zhang, W.; Gong, G. Reactive coating of soybean oil-based polymer on nanofibrillated cellulose film for water vapor barrier packaging. Carbohydr. Polym. 2014, 111, 524-529.
192. Çolak, S.; Küsefoğlu, S.H. Synthesis and interfacial properties of aminosilane derivative of acrylated epoxidized soybean oil. J. Appl. Polym. Sci. 2007, 104, 2244-2253.
193. Rhim, J.-W.; Ng, P.K. Natural biopolymer-based nanocomposite films for packaging applications. Crit. Rev. Food Sci. Nutr. 2007, 47, 411-433.
194. Casariego, A.; Souza, B.; Cerqueira, M.; Teixeira, J.; Cruz, L.; Díaz, R.; Vicente, A. Chitosan/clay films' properties as affected by biopolymer and clay micro/nanoparticles' concentrations. Food Hydrocoll. 2009, 23, 1895-1902.
195. Wang, L.; Wang, A. Adsorption characteristics of Congo Red onto the chitosan/montmorillonite nanocomposite. J. Hazard. Mater. 2007, 147, 979-985.
196. Dufresne, A. Polysaccharide nano crystal reinforced nanocomposites. Can. J. Chem. 2008, 86, 484-494.
197. Dubief, D.; Samain, E.; Dufresne, A. Polysaccharide microcrystals reinforced amorphous poly(β-hydroxyoctanoate) nanocomposite materials. Macromolecules 1999, 32, 5765-5771.
198. Wong, K.K.H.; Zinke-Allmang, M.; Hutter, J.L.; Hrapovic, S.; Luong, J.H.; Wan, W. The effect of carbon nanotube aspect ratio and loading on the elastic modulus of electrospun poly(vinyl alcohol)-carbon nanotube hybrid fibers. Carbon 2009, 47, 2571-2578.
199. Nakagaito, A.N.; Yano, H. The effect of fiber content on the mechanical and thermal expansion properties of biocomposites based on microfibrillated cellulose. Cellulose 2008, 15, 555-559.
200. Nakagaito, A.; Yano, H. Novel high-strength biocomposites based on microfibrillated cellulose having nano-order-unit web-like network structure. Appl. Phys. A 2005, 80, 155-159.
201. Okahisa, Y.; Yoshida, A.; Miyaguchi, S.; Yano, H. Optically transparent wood-cellulose nanocomposite as a base substrate for flexible organic light-emitting diode displays. Compos. Sci. Technol. 2009, 69, 1958-1961.
202. Ching, Y.C.; Rahman, A.; Ching, K.Y.; Sukiman, N.L.; Cheng, H.C. Preparation and characterization of polyvinyl alcohol-based composite reinforced with nanocellulose and nanosilica. BioResources 2015, 10, 3364-3377.
203. De Mesquita, J.P.; Donnici, C.L.; Teixeira, I.F.; Pereira, F.V. Bio-based nanocomposites obtained through covalent linkage between chitosan and cellulose nanocrystals. Carbohydr. Polym. 2012, 90, 210-217.
204. Galus, S.; Kadzińska, J. Food applications of emulsion-based edible films and coatings. Trends Food Sci. Technol. 2015, 45, 273-283.
205. Montes, S.; Carrasco, P.M.; Ruiz, V.; Cabañero, G.; Grande, H.J.; Labidi, J.; Odriozola, I. Synergistic reinforcement of poly(vinyl alcohol) nanocomposites with cellulose nanocrystal-stabilized graphene. Compos. Sci. Technol. 2015, 117, 26-31.
206. Lin, S.; Chen, L.; Huang, L.; Cao, S.; Luo, X.; Liu, K. Novel antimicrobial chitosan-cellulose composite films bioconjugated with silver nanoparticles. Ind. Crops Prod. 2015, 70, 395-403.
207. Lizundia, E.; Urruchi, A.; Vilas, J.; León, L. Increased functional properties and thermal stability of flexible cellulose nanocrystal/ZnO films. Carbohydr. Polym. 2016, 136, 250-258.
208. Zarina, S.; Ahmad, I. Biodegradable composite films based on κ-carrageenan reinforced by cellulose nanocrystal from kenaf fibers. BioResources 2014, 10, 256-271.
209. Li, H.-Z.; Chen, S.-C.; Wang, Y.-Z. Preparation and characterization of nanocomposites of polyvinyl alcohol/cellulose nanowhiskers/chitosan. Compos. Sci. Technol. 2015, 115, 60-65.
210. Atef, M.; Rezaei, M.; Behrooz, R. Characterization of physical, mechanical, and antibacterial properties of agar-cellulose bionanocomposite films incorporated with savory essential oil. Food Hydrocoll. 2015, 45, 150-157.
211. El Miri, N.; Abdelouahdi, K.; Barakat, A.; Zahouily, M.; Fihri, A.; Solhy, A.; el Achaby, M. Bio-nanocomposite films reinforced with cellulose nanocrystals: Rheology of film-forming solutions, transparency, water vapor barrier and tensile properties of films. Carbohydr. Polym. 2015, 129, 156-167.
212. Jafarzadeh, S.; Alias, A.K.; Ariffin, F.; Mahmud, S.; Najafi, A. Preparation and characterization of bionanocomposite films reinforced with nano kaolin. J. Food Sci. Technol. 2015, 53, 1111-1119.
213. Chen, G.; Zhang, B.; Zhao, J. Dispersion process and effect of oleic acid on properties of cellulose sulfate-oleic acid composite film. Materials 2015, 8, 2346-2360.
214. Rubentheren, V.; Ward, T.A.; Chee, C.Y.; Tang, C.K. Processing and analysis of chitosan nanocomposites reinforced with chitin whiskers and tannic acid as a crosslinker. Carbohydr. Polym. 2015, 115, 379-387.
215. Rubentheren, V.; Ward, T.A.; Chee, C.Y.; Nair, P. Physical and chemical reinforcement of chitosan film using nanocrystalline cellulose and tannic acid. Cellulose 2015, 22, 2529-2541.