Biodegradable composite films based on κ-carrageenan reinforced by cellulose nanocrystal from kenaf fibers

BioResources

Volumn 10, Issue 1, 2015, Pages 256-271

  Zarina, Siti ^a   Ahmad, Ishak ^a  

^a UNIVERSITI KEBANGSAAN MALAYSIA   (Malaysia)

Author keywords

Cellulose nanocrystals; Kenaf; Mechanical properties; carrageenan biocomposite films

Indexed keywords

BLEACHING; CELLULOSE; CELLULOSE DERIVATIVES; CELLULOSE FILMS; CLEANING; COMPOSITE MATERIALS; ELECTRON MICROSCOPY; FIELD EMISSION MICROSCOPES; FILM PREPARATION; FOURIER TRANSFORM INFRARED SPECTROSCOPY; HEMP; KENAF FIBERS; MECHANICAL PROPERTIES; NANOCOMPOSITE FILMS; NANOCRYSTALS; REINFORCED PLASTICS; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; TENSILE STRENGTH; THERMODYNAMIC STABILITY; THERMOGRAVIMETRIC ANALYSIS; TRANSMISSION ELECTRON MICROSCOPY; CELLULOSE NANOCRYSTALS; HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPY;

BIOCOMPOSITE FILMS; BIODEGRADABLE COMPOSITES; CELLULOSE NANO-CRYSTALS; CELLULOSE NANOCRYSTAL (CNCS); FIELD EMISSION SCANNING ELECTRON MICROSCOPY; KENAF; REINFORCEMENT MATERIALS; SULFURIC ACID HYDROLYSIS; KAPPA CARRAGEENAN; MORPHOLOGICAL ANALYSIS;

COMPOSITE FILMS; REINFORCEMENT;

ALKALI TREATMENT; CARRAGEENANS; CELLULOSE DERIVATIVES; GRAVIMETRY; KENAF; THIN FILMS; TRANSMISSION ELECTRON MICROSCOPY; BLEACHING; CLEANING; HEMP; SCANNING ELECTRON MICROSCOPY; THERMAL ANALYSIS;

HIBISCUS CANNABINUS;

EID: 84923650876     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Article

References (44)

1. Abdorreza, M. N., Robal, M., Cheng, L. H., Tajul, A. Y., and Karim, A. A. (2012). "Physicochemical, thermal, and rheological properties of acid-hydrolyzed sago (Metroxylon sagu) starch". LWT-Food Science and Technology 46(1), 135-141. DOI: 10.1016/j.lwt.2011.10.015.
2. Abdul Khalil, H. P. S., Bhat, A. H., and Yusra A. F. I. (2012). "Green composites from sustainable cellulose nanofibrils: A review". Carbohydrate Polymers 87(2), 963-979. DOI: 10.1016/j.carbpol.2011.08.078.
3. Adel, A. M., Abd El-Wahab, Z. H., Ibrahim, A. A., and Al-Shemy, M. T. (2010). "Characterization of microcrystalline cellulose prepared from lignocellulosic materials. Part I. Acid catalyzed hydrolysis". Bioresource Technology 101(12), 4446-4455. DOI: 10.1016/j.biortech.2010.01.047.
4. Alemdar, A., and Sain, M. (2008). "Isolation and characterization of nanofibers from agricultural residues-Wheat straw and soy hulls". Bioresource Technology 99(6), 1664-1671. DOI: 10.1016/j.biortech.2007.04.029.
5. Alves, V., Costa, N., Hilliou, L., Laratonda, F., Goncalves, M., Sereno, A., and Coelhoso, I. (2006). "Design of biodegradable composite films for food packaging". Desalination 199(1-3), 331-333. DOI: 10.1016/j.desal.2006.03.078.
6. Alves, V. D., Castelló, R., Ferreira, A. R., Costa, N., Fonseca, I. M., and Coelhoso, I. M. (2011). "Barrier properties of carrageenan/pectin biodegradable composite films". Procedia Food Science 1(1), 240-245. DOI: 10.1016/j.profoo.2011.09.038.
7. Averous, L., and Boquillon, N. (2004). "Biocomposites based on plasticized starch: Thermal and mechanical behaviours". Carbohydrate Polymers 56(2), 111-122. DOI: 10.1016/j.carbpol.2003.11.015.
8. Ayuk, J. Z., Mathew, A. P., and Oksman, K. (2009). "The effect of plasticizer and cellulose nanowhisker content on the dispersion and properties of cellulose acetate". Journal of Applied Polymer Sciences 114(5), 2723-2730. DOI: 10.1002/app.30583.
9. Aziz, S. H., and Ansell, M. P. (2004). "The effect of alkalization and fiber alignment on the mechanical and thermal properties of kenaf and hemp bast fiber composites: Part 1-Polyester resin matrix". Composites Science and Technology 64(9), 1219-1230. DOI: 10.1016/j.compscitech.2003.10.001.
10. Brígida, A. I. S., Calado, V. M. A., Gonçalves, L. R. B., and Coelho, M. A. Z. (2010). "Effect of chemical treatments on properties of green coconut fiber". Carbohydrate Polymers 79(4), 832-838. DOI: 10.1016/j.carbpol.2009.10.005.
11. Dorigato, A., Dzenis, Y., and Pegoretti, A. (2013). "Filler aggregation as a reinforcement mechanism in polymer nanocomposites". Mechanics of Materials 61(1), 79-90. DOI: 10.1016/j.mechmat.2013.02.004.
12. Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010). "Review: Current international research into cellulose nanofibers and nanocomposites". Journal of Materials Science 45(1), 1-33. DOI: 10.1007/s10853-009-3874-0.
13. El-Shekeil, Y. A., Sapuan, S. M., Khalina, A., Zainudin, M., and Al-Shuja'a, E. S. O. (2012). "Influence of chemical treatment on the tensile properties of kenaf fiber reinforced thermoplastic polyurethane composite". eXPRESS Polymer Letters 6(12), 1032-1040. DOI: 10.3144/expresspolymlett.2012.108.
14. Farahani, G. N., Ahmad, I., and Mosadeghzad, Z. (2012). "Effect of fiber content, fiber length and alkali treatment on properties of kenaf fiber/UPR composites based on recycled PET wastes". Polymer-Plastics Technology and Engineering 51(6), 634-639. DOI: 10.1080/03602559.2012.659314.
15. Faruk, O., Bledzki, A. K., Fink, H. P., and Sain, M. (2012). "Biocomposites reinforced with natural fibers: 2000-2010". Progress in Polymer Science 37(11), 1552-1596. DOI: 10.1016/j.progpolymsci.2012.04.003.
16. Fowler, P. A., Huqhes, J. M., and Elias, R. M. (2006). "Review biocomposites: Technology, environmental credentials and market forces". Journal of the Science of Food and Agriculture 86(12), 1781-1789. DOI: 10.1002/jsfa.2558.
17. Huq, T., Salmieri, S., Khan, A., Khan, R. A., Le Tien, C., Riedl, B., Fraschini, C., Bouchard, J., Uribe-Calderon, J., Kamal, M. R., and Lacroix, M. (2012). "Nanocrystalline cellulose (NCC) reinforced alginate based biodegradable nanocomposite film". Carbohydrate Polymers 90(4), 1757-1763. DOI: 10.1016/j.carbpol.2012.07.065.
18. Johar, N., and Ahmad, I. (2012). "Morphological, thermal, and mechanical properties of starch biocomposite films reinforced by cellulose nanocrystals from rice husks". BioResources 7(4), 5469-5477. DOI: 10.15376/biores.7.4.5469-5477.
19. Jonobi, M., Harun, J., Shakeri, A., Misra, M., and Oksman, K. (2009). "Chemical composition crystallinity and thermal degradation bleached and unbleached kenaf bast (Hibiscus cannabinus) pulp and nanofibers". BioResources 4(2), 626-639.
20. Kargarzadeh, H., Ahmad, I., Abdullah, I., Dufresne, A., Zainudin, S. Y., and Sheltami, R. M. (2012). "Effects of hydrolysis conditions on the morphology, crystallinity, and thermal stability of cellulose nanocrystals extracted from kenaf bast fibers". Cellulose 19(3), 855-866. DOI: 10.1007/s10570-012-9684-6.
21. Khan, A., Khan, R. A., Salmieri, S., Le Tien, C., Riedl, B., Bouchard, J., Chauve, G., Tan, V., Kamal, M. R., and Lacroix, M. (2012). "Mechanical and barrier properties of nanocrystalline cellulose reinforced chitosan based nanocomposite films". Carbohydrate Polymers 90(4), 1601-1608. DOI: 10.1016/j.carbpol.2012.07.037.
22. Lafargue, D., Lourdin, D., and Doublier, J. L. (2007). "Film-forming properties of a modified starch/j-carrageenan mixture in relation to its rheological behavior". Carbohydrate Polymers 70(1), 101-111. DOI: 10.1016/j.carbpol.2007.03.019.
23. Li, R., Fei, J., Cai, Y., Li, Y., Feng, J., and Yao, J. (2009). "Cellulose whiskers extracted from mulberry: A novel biomass production". Carbohydrate Polymers 76(1), 94-99. DOI: 10.1016/j.carbpol.2008.09.034.
24. Liu, D., Zhong, T., Peter, R., Li, K., and Wuc, Q. (2010). "Starch composites reinforced by bamboo cellulosic crystals". Bioresource Technology 101(7), 2529-2536. DOI: 10.1016/j.biortech.2009.11.058.
25. Martins, J. T., Cerqueira, M. A., Bourbon, A. I., Pinheiro, A. C., Souza, B. W. S., and Vicente, A. A. (2012). "Synergistic effects between κ-carrageenan and locust bean gum on physicochemical properties of edible films made thereof". Food Hydrocolloids 29(2), 280-289. DOI: 10.1016/j.foodhyd.2012.03.004.
26. Mohd Yuhazri, Y., Phongsakorn, P. T., Sihombing, H., Jeefferie, A. R., Perumal, P., Kamarul, A. M., and Rassiah, K. (2011). "Mechanical properties of kenaf/polyester composites". International Journal of Engineering & Technology IJET-IJENS 11(1), 106-110.
27. Nacos, M. K., Katapodis, P., Pappas, C., Daferera, D., Tarantilis, P. A., Christakopoulos, P., and Polissiou, M. (2006). "Kenaf xylan-A source of biologically active acidic oligosaccharides". Carbohydrate Polymers 66(1), 126-134. DOI: 10.1016/j.carbpol.2006.02.032.
28. Netoa, W. P. F., Silvério, H. A., Dantas, N. O., and Pasquini, D. (2013). "Extraction and characterization of cellulose nanocrystals from agro-industrial residue-Soy hulls". Industrial Crops and Products 42, 480-488. DOI: 10.1016/j.indcrop.2012.06.041.
29. Noranizan, I. A., and Ahmad, I. (2012). "Effect of fiber loading and compatibilizer on rheological, mechanical and morphological behaviors". Open Journal of Polymer Chemistry 2(2), 31-41. DOI: 10.4236/ojpchem.2012.22005.
30. Oksman, K., Mathew, A. P., Bondeson, D., and Kvien, I. (2006). "Manufacturing process of cellulose whiskers/polylactic acid nanocomposites". Composites Science and Technology 66(15), 2776-2784. DOI: 10.1016/j.compscitech.2006.03.002.
31. Park, S. Y., Lee, B. I., Jung, S. T., and Park, H. J. (2001). "Biopolymer composites films based on k-carrageenan and chitosan". Materials Research Bulletin 36(3-4), 511-519. DOI: 10.1016/S0025-5408(01)00545-1.
32. Raj, R.G., Kokta, B.V., and Daneault, C. (1990). "Comparative study on the effect of aging on mechanical properties of LLDPE-glass fiber, mica, and wood fiber composites". Journal of Applied Polymer Science 40(5-6), 645-655. DOI: 10.1002/app.1990.070400502.
33. Sheltami, M. R., Abdullah, I., Ahmad, I., Alain, D., and Kargarzadeh, H. (2012). "Extraction of cellulose nanocrystals from mengkuang leaves (Pandanus tectorius)". Carbohydrate Polymers 88(2), 772-779. DOI: 10.1016/j.carbpol.2012.01.062.
34. Safinas, A. M. S., Bakar, A. A., and Ismail, H. (2013). "Properties of kenaf bast powder-filler high density polyethylene/ethylene propylene biene monomer composite". BioResources 8(2), 2386-2397. DOI: 10.15376/biores.8.2.2386-2397.
35. Sanchez-Garcia, M. D., Hilliou, L., and Lagaron, J. M. (2010). "Morphology and water barrier properties of nanobiocomposites of k/ι-hybrid carrageenan and cellulose nanowhiskers". Journal of Agricultural and Food Chemistry 58(24), 12847-12857. DOI: 10.1021/jf102764e.
36. Satyanarayana, K. G., Arizaga, G. G. C., and Wypych, F. (2009). "Biodegradable composites based on lignocellulosic fibers-An overview". Progress in Polymer Science 34(9), 982-1021. DOI: 10.1016/j.progpolymsci.2008.12.002.
37. Schlemmer, D., and Sales, M. J. A. (2010). "Thermoplastic starch film with vegetable oils of Brazilian cerrado. Thermal characterization". Journal of Thermal Analysis and Calorimetry 99(2), 657-679. DOI: 10.1007/s10973-009-0352-5.
38. Shi, J., Shi, S. Q., Barnes, H. M., and Pittman Jr., C. U. (2011). "A chemical process for preparing cellulosic fibers hierarchically from kenaf bast fibers". BioResources 6(1), 879-890.
39. Soykeabkaew, N., Laosat, N., Ngaokla, A., Yodsuwan, N., and Tunkasiri, T. (2012). "Reinforcing potential of micro-and nano-sized fibers in the starch-based biocomposites". Composites Science and Technology 72(7), 845-852. DOI: 10.1016/j.compscitech.2012.02.015.
40. Tharanathan, R. N. (2003). "Biodegradable films and composite coatings: Past, present, and future". Food Sciences & Technology 14(3), 71-78. DOI: 10.1016/S0924-2244(02)00280-7.
41. The, D. P., Debeaufort, F., Voilley, A., and Luu, D. (2009). "Biopolymer interactions affects the functional properties of edible films based on agar, cassava starch, and arabinoxylan blends". Journal of Food Engineering 90(4), 548-558. DOI: 10.1016/j.jfoodeng.2008.07.023.
42. Troedec, M. L., Sedan, D., Peyratout, C., Bonnet, J. P., Smith, A., Guinebretiere, R., Gloaguen, V., and Krausz, P. (2008). "Influence of various chemical treatments on the composition and structure of hemp fibers". Composites Part A-Applied Science and Manufacturing 39(3), 514-522. DOI: 10.1016/j.compositesa.2007.12.001.
43. Vieira, M. G. A., Silva, M. A. D., Santos, L. O. D., and Beppu, M. M. (2011). "Natural-based plasticizers and biopolymer films: A review". European Polymer Journal 47(3), 254-263. DOI: 10.1016/j.eurpolymj.2010.12.011.
44. Zainuddin, S. Y. Z., Ahmad, I., Kargarzadeh, H., Abdullah, I., and Dufresne, A. (2013). "Potential of using multiscale kenaf fibers as reinforcing filler in cassava starch-kenaf biocomposites". Carbohydrate Polymers 92(2), 2299-2305. DOI: 10.1016/j.carbpol.2012.11.106.