Integrated HCCI engine control based on a performance index

Journal of Engineering for Gas Turbines and Power

Volumn 136, Issue 10, 2014, Pages

  Bidarvatan, M ^a   Shahbakhti, M ^a  

^a Michigan Technological University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CARBON MONOXIDE; DIESEL ENGINES; ENGINE CYLINDERS; MIMO SYSTEMS;

EXHAUST AFTERTREATMENT; HCCI ENGINE MODELING; HOMOGENOUS CHARGE COMPRESSION IGNITION; INDICATED MEAN EFFECTIVE PRESSURE; MULTI-INPUT MULTI-OUTPUT; OPERATING CONDITION; REFERENCE TRAJECTORIES; SINGLE CYLINDER ENGINE;

CONTROLLERS;

EID: 84899880221     PISSN: 07424795     EISSN: 15288919     Source Type: Journal    
DOI: 10.1115/1.4027279     Document Type: Article

References (39)

1. Zhao, F., Asmus, T., Assanis, D. N., Dec, J. E., Eng, J. A., and Najt, P. M., 2003, Homogeneous Charge Compression Ignition (HCCI) Engines, Society of Automotive Engineers, Warrendale, PA.
2. Williams, S., Hu, L., Nakazono, T., Ohtsubo, H., and Uchida, M., 2008, "Oxidation Catalysts for Natural Gas Engine Operating Under HCCI or SI Conditions," SAE Technical Paper No. 2008-01-0807.
3. Shahbakhti, M., Ghazimirsaied, A., and Koch, C. R., 2010, "Experimental Study of Exhaust Temperature Variation in a Homogeneous Charge Compression Ignition Engine," Proc. Inst. Mech. Eng., Part D: J. Automob. Eng., 224(9), pp. 1177-1197.
4. Xingcai, L., Yuchum, H., Libin, J,. Linlin, Z., and Zhen, H., 2006, "Heat Release Analysis on Combustion and Parametric Study on Emissions of HCCI Engines Fueled With 2-Propanol/n-Heptane Blend Fuels," Energy Fuels, 20(5), pp. 1870-1878.
5. Kalghatgi, G. T. and Head, R. A., 2006, "Combustion Limits and Efficiency in a Homogeneous Charge Compression Ignition Engine," Int. J. Engine Res., 7(3), pp. 215-236.
6. Shahbakhti, M. and Koch, C. R., 2008, "Characterizing the Cyclic Variability of Ignition Timing in an HCCI Engine Fueled With n-Heptane/iso-Octane Blend Fuels," Int. J. Engine Res., 9(9), pp. 361-397.
7. Xu, H. M., Wyszynski, M. L., Megaritis, A., Yap, D., Wilson, T., Qiao, J., Richardson, S., Golunski, S., and Peucheret, S., 2007, "Research on Expansion of Operating Windows of Controlled Homogeneous Auto-Ignition Engines," Int. J. Engine Res., 8(1), pp. 29-40.
8. Shahbakhti, M., Ghazimirsaied, A., and Koch, C. R., 2011, "Modeling Ranges of Cyclic Variability for HCCI Ignition Timing Control," ASME Paper No. DSCC2011-6118.
9. Lu, X., Chen, W., Hou, Y., and Huang, Z., 2005, "Study on the Ignition, Combustion and Emissions of HCCI Combustion Engines Fueled With Primary Reference Fuels," SAE Technical Paper No. 2005-01-0155.
10. Widd, A., Ekholm, K., Tunestål, P., and Johansson, R., 2012, "Physics-Based Model Predictive Control of HCCI Combustion Phasing Using Fast Thermal Management and VVA," IEEE Trans. Control Syst. Technol., 20(3), pp. 688-699.
11. Ravi, N., Liao, H. H., Jungkunz, A. F., Widd, A., and Gerdes, J. C., 2012, "Model Predictive Control of HCCI Using Variable Valve Actuation and Fuel Injection," J. Control Eng. Pract., 20(4), pp. 421-430.
12. Chiang, C. J., Stefanopoulou, A. G., and Jankovic, M., 2007, "Nonlinear Observer-Based Control of Load Transitions in Homogeneous Charge Compression Ignition Engines," IEEE Trans. Control Syst. Technol., 15(3), pp. 438-448.
13. Chiang, C. J., Huang, C. C., and Jankovic, M., 2010, "Discrete-Time Cross-Term Forwarding Design of Robust Controllers for HCCI Engines," American Control Conference (ACC), Baltimore, MD, June 30-July 2, pp. 2218-2223.
14. Strandh, P., Bengtsson, J., Johansson, R., Tunestål, P., and Johansson, B., 2005, "Variable Valve Actuation for Timing Control of a HCCI Engine," SAE Technical Paper No. 2005-01-0147.
15. Olsson, J.-O., Tunestål, P., and Johansson, B., 2001, "Closed-Loop Control of an HCCI Engine," SAE Technical Paper No. 2001-01-1031.
16. Audet, A. and Koch, C. R., 2009, "Actuator Comparison for Closed Loop Control of HCCI Combustion Timing," SAE Technical Paper No. 2009-01-1135.
17. Bidarvatan, M., Shahbakhti, M., and Jazayeri, S. A., 2012, "Model-Based Control of Combustion Phasing in an HCCI Engine," SAE Int. J. Engines, 5(3), pp. 1163-1176.
18. Ravi, N., Roelle, M. J., Liao, H.-H., Jungkunz, A. F., Chang, C. F., Park, S., and Gerdes, J. C., 2010, "Model-Based Control of HCCI Engines Using Exhaust Recompression," IEEE Trans. Control Syst. Technol., 18(6), pp. 1289-1302.
19. Haraldsson, G., Tunestål, P., and Johansson, B., 2005, "Transient Control of a Multi Cylinder HCCI Engine During a Drive Cycle," SAE Technical Paper No. 2005-01-0153.
20. Shaver, G. M., Gerdes, J. C., and Roelle, M. J., 2009, "Physics-Based Modeling and Control of Residual-Affected HCCI Engines," ASME J. Dyn. Syst., Meas., Control, 131(2), p. 021002.
21. Shaver, G. M., Gerdes, J. C., and Roelle, M. J., 2004, "Physics-Based Closed Loop Control of Phasing, Peak Pressure and Work Output in HCCI Engines Utilizing Variable Valve Actuation," American Control Conference, Boston, MA, June 30-July 2, pp. 150-155.
22. Bidarvatan, M., Shahbakhti, M., Jazayeri, S. A., and Koch, C. R., 2014, "Cycleto-Cycle Modeling and Sliding Mode Control of Blended Fuel HCCI Engine," J. Control Eng. Pract., 24, pp. 79-91.
23. Bidarvatan, M. and Shahbakhti, M., 2013, "Two-Input Two-Output Control of Blended Fuel HCCI Engines," SAE Technical Paper No. 2013-01-1663.
24. Ravi, N., Liao, H.-H., Jungkunz, A. F., Chang, C. F., Song, H. H., and Gerdes, J. C., 2012, "Modeling and Control of an Exhaust Recompression HCCI Engine Using Split Injection," ASME J. Dyn. Syst., Meas., Control, 134(1), p. 011016.
25. Tandra, V. and Srivastava, N., 2009, "Optimal Peak Pressure and Exhaust Temperature Tracking Control for a Two Zone HCCI Engine Model With Mean Burn Duration," SAE Technical Paper No. 2009-01-1130.
26. Gorzelic, P., Hellström, E., Stefanopoulou, A. G., and Jiang, L., 2012, "Model-Based Feedback Control for an Automated Transfer Out of SI Operation During SI to HCCI Transitions in Gasoline Engines," ASME Paper No. DSCC2012-8779.
27. Bengtsson, J., Strandh, P., Johansson, R., Tunesta, P., and Johansson, B., 2007, "Hybrid Modeling of Homogeneous Charge Compression Ignition (HCCI) Engine Dynamics-A Survey," Int. J. Control, 80(11), pp. 1814-1847.
28. Strandh, P., Bengtsson, J., Johansson, R., Tunestål, P., and Johansson, B., 2004, "Cycle-to-Cycle Control of a Dual-Fuel HCCI Engine," SAE Technical Paper No. 2004-01-0941.
29. Liao, H. H., Widd, A., Ravi, N., Jungkunz, A. F., Kang, J. M., and Gerdes, J. C., 2013, "Control of Recompression HCCI With a Three Region Switching Controller," J. Control Eng. Pract., 21(2), pp. 135-145.
30. Heywood, J. B., 1988, Internal Combustion Engine Fundamentals, McGraw-Hill, New York.
31. Ferrari, V., Rabinowitz, H., Siemund, S., Collinq, T., and Campbell, B., 2007, "Achieving EURO III and EURO IV With Ultra-Low Precious Metal Loadings," SAE Technical Paper No. 2007-01-2565.
32. Jean, E., Leroy, V., Montenegro, G., Onorati, A., and Laurell, M., 2007, "Impact of Ultra Low Thermal Inertia Manifolds on Emission Performance," SAE Technical Paper No. 2007-01-0935.
33. Kuboyama, T., Moriyoshi, Y., Hatamura, K., Takanashi, J., Urata, Y., and Yamada, T., 2012, "A Study of Newly Developed HCCI Engine With Wide Operating Range Equipped With Blowdown Supercharging System," SAE Int. J. Engines, 5(2), pp. 51-66.
34. Sjöberg, M. and Dec, J. E., 2009, "Influence of EGR Quality and Unmixedness on the High-Load Limits of HCCI Engines," SAE Int. J. Engines, 2(1), pp. 492-510.
35. x Emissions Using Conventional Gasoline," SAE Int. J. Engines, 3(1), pp. 750-767.
36. Johansson, T., Johansson, B., Tunestål, P., and Aulin, H., 2009, "HCCI Operating Range in a Turbo-Charged Multi Cylinder Engine With VVT and Spray-Guided DI," SAE Technical Paper No. 2009-01-0494.
37. Shahbakhti, M. and Koch, C. R., 2010, "Physics Based Control Oriented Model for HCCI Combustion Timing," ASME J. Dyn. Syst., Meas., Control, 132(2), p. 021010.
38. Shahbakhti, M., Lupul, R., and Koch, C. R., 2007, "Sensitivity Analysis and Modeling of HCCI Auto-Ignition Timing," Fifth IFAC Symposium on Advances in Automotive Control, Pajaro Dunes, August 20-22, pp. 303-310.
39. Franklin, G. F., Powell, D., and Workman, M. L., 1988, Digital Control of Dynamic Systems, 3rd ed., Addison-Wesley, Menlo Park, CA.