Physics-based model predictive control of HCCI combustion phasing using fast thermal management and VVA

IEEE Transactions on Control Systems Technology

Volumn 20, Issue 3, 2012, Pages 688-699

  Widd, Anders ^a   Ekholm, Kent ^a   Tunestål, Per ^a   Johansson, Rolf ^a  

^a LUND UNIVERSITY   (Sweden)

Author keywords

Engine control; homogeneous charge compression ignition (HCCI); model predictive control (MPC); model based control

Indexed keywords

COMBUSTION; CONTROLLERS; ENGINES; IGNITION; INTERNAL COMBUSTION ENGINES; PREDICTIVE CONTROL SYSTEMS; TEMPERATURE MEASUREMENT;

CALIBRATION AND VALIDATIONS; CONTROL EXPERIMENTS; CYLINDER WALL TEMPERATURE; ENGINE CONTROL; HOMOGENEOUS CHARGE COMPRESSION IGNITION; MODEL BASED CONTROLS; PHYSICS-BASED MODELING; PREDICTIVE CONTROLLER;

MODEL PREDICTIVE CONTROL;

EID: 85027942462     PISSN: 10636536     EISSN: None     Source Type: Journal    
DOI: 10.1109/TCST.2011.2128871     Document Type: Article

References (38)

1. J. Bengtsson, P. Strandh, R. Johansson, P. Tunestål, and B. Johansson, "Hybrid modelling of homogeneous charge compression ignition (HCCI) engine dynamic-A survey," Int. J. Control, vol. 80, no. 11, pp. 1814-1848, Nov. 2007. (Pubitemid 47554407)
2. C. Chiang and A. Stefanopoulou, "Sensitivity analysis of combustion timing and duration of homogeneous charge compression ignition (HCCI) engines," in Proc. Amer. Control Conf. (ACC), 2006, pp. 1857-1862. (Pubitemid 46531087)
3. J. B. Heywood, Internal Combustion Engine Fundamentals. New York: McGraw-Hill, 1988.
4. G. M. Shaver, J. C. Gerdes, and M. J. Roelle, "Physics-based modeling and control of residual-affected HCCI engines," J. Dyn. Syst. Meas., Control vol. 131, no. 2, p. 021002, 2009. [Online]. Available: http://link.aip.org/link/?JDS/131/021002/1
5. C.-J. Chiang, A. G. Stefanopoulou, and M. Jankovic, "Nonlinear observer-based control of load transitions in homogeneous charge compression ignition engines," IEEE Trans. Control Syst. Technol. vol. 15, no. 3, pp. 438-448, May 2007. (Pubitemid 46746262)
6. G. M. Shaver, M. Roelle, and J. C. Gerdes, "Modeling cycle-to-cycle dynamics and mode transition in HCCI engines with variable valve actuation," Control Eng. Pract., no. 14, pp. 213-222, 2006. (Pubitemid 43012930)
7. J. Bengtsson, M. Gäfvert, and P. Strandh, "Modeling of HCCI engine combustion for control analysis," in Proc. IEEE Conf. Decision Control (CDC), 2004, pp. 1682-1687. (Pubitemid 40291198)
8. D. Blom, M. Karlsson, K. Ekholm, P. Tunestål, and R. Johansson, "HCCI engine modeling and control using conservation principles," SAE, Warrendale, PA, Tech. Rep. 2008-01-0789, 2008.
9. C. Wilhelmsson, A. Vressner, P. Tunestål, B. Johansson, F. Särner, and M. Aldén, "Combustion chamber wall temperature measurement and modeling during transient HCCI operation," SAE,Warrendale, PA, Tech. Rep. 005-01-3731, 2005.
10. M. J. Roelle, N. Ravi, A. F. Jungkunz, and J. C. Gerdes, "A dynamic model of recompression HCCI combustion including cylinder wall temperature," in Proc. IMECE, 2006, pp. 415-424.
11. K. Chang, G. A. Lavoie, A. Babajimopoulos, Z. S. Filipi, and D. N. Assanis, "Control of a multi-cylinder HCCI engine during transient operation by modulating residual gas fraction to compensate for wall temperature effects," SAE,Warrendale, PA, Tech. Rep. 2007-01-0204, 2007.
12. C. D. Rakopoulos, D. C. Rakopoulos, G. C. Mavropoulos, and E. G. Giakoumis, "Experimental and theoretical study of the short term response temperature transients in the cylinder walls of a diesel engine at various operating conditions," Appl. Thermal Eng., no. 24, pp. 679-702, 2004.
13. G. Särner, M. Richter, M. Aldén, A. Vressner, and B. Johansson, "Cycle resolved wall temperature measurements using laser-induced phosphorescence in an HCCI engine," SAE, Warrendale, PA, Tech. Rep. 2005-01-3870, 2005.
14. J. Chang, O. Güralp, Z. Filipi, D. Assanis, T.-W. Kuo, P. Najt, and R. Rask, "New heat transfer correlation for an HCCI engine derived from measurements of instantaneous surface heat flux," SAE, Warrendale, PA, Tech. Rep. 2004-01-2996, 2004.
15. H. Soyhan, H. Yasar, H. Walmsley, B. Head, G. Kalghatgi, and C. Sorusbay, "Evaluation of heat transfer correlations for HCCI engine modeling," Appl. Thermal Eng., no. 29, pp. 541-549, 2009.
16. D. J. Rausen and A. G. Stefanopoulou, "A mean-value model for control of homogeneous charge compression ignition (HCCI) engines," J. Dyn. Syst. Meas., Control, no. 127, pp. 355-362, 2005. (Pubitemid 41359651)
17. M. Canova, R. Garcin, S. Midlam-Mohler, Y. Guezennec, and G. Rizzoni, "A control-oriented model of combustion process in a HCCI diesel engine," in Proc. Amer. Control Conf. (ACC), 2005, pp. 4446-4451. (Pubitemid 41188704)
18. N. Ravi, M. J. Roelle, A. F. Jungkunz, and J. C. Gerdes, "A physically based two-state model for controlling exhaust recompression HCCI in gasoline engines," in Proc. IMECE, 2006, pp. 483-492.
19. P. Strandh, J. Bengtsson, R. Johansson, P. Tunestål, and B. Johansson, "Cycle-to-cycle control of a dual-fuel HCCI engine," SAE, Warrendale, PA, Tech. Rep. 2004-01-0941, 2004.
20. J. Bengtsson, "Closed-loop control of HCCI engine dynamics," Ph.D. dissertation, Dept. Autom. Control, Lund Inst. Technol., Lund Univ., Lund, Sweden, Nov. 2004.
21. J. Maciejowski, Predictive Control With Constraints. Essex, England: Prentice-Hall, 2002.
22. A. Widd, K. Ekholm, P. Tunestål, and R. Johansson, "Experimental evaluation of predictive combustion phasing control in an HCCI engine using fast thermal management and VVA," presented at the IEEE Multi-Conf. Syst. Control (MSC), Saint Petersburg, Russia, 2009.
23. W. J. Rugh, Linear System Theory, 2nd ed. Upper Saddle River, NJ: Prentice-Hall, 1996.
24. M. Hillion, J. Chauvin, and N. Petit, "Controlling the start of combustion on an HCCI diesel engine," in Proc. Amer. Control Conf. (ACC), 2008, pp. 2084-2091.
25. M. Shahbakhti and R.Koch, "Control oriented modeling of combustion phasing for an HCCI engine," in Proc. Amer. Control Conf. (ACC), 2007, pp. 3694-3699.
26. A.Widd, P. Tunestål, C.Wilhelmsson, and R. Johansson, "Control-oriented modeling of homogeneous charge compression ignition incorporating cylinderwall temperature dynamics," in Proc. 9th Int. Symp. Adv. Veh. Control (AVEC), 2008, pp. 146-151.
27. A. Widd, P. Tunestål, and R. Johansson, "Physical modeling and control of homogeneous charge compression ignition (HCCI) engines," in Proc. 47th IEEE Conf. Decision Control (CDC), 2008, pp. 5615-5620.
28. "Symbolic Math Toolbox 5. User's Guide," The Mathworks Inc., Natick, MA, 2008.
29. J. Bengtsson, P. Strandh, R. Johansson, P. Tunestål, and B. Johansson, "Model predictive control of homogeneous charge compression ignition (HCCI) engine dynamics," in Proc. IEEE Int. Conf. Control Appl. (CCA), 2006, pp. 1675-1680.
30. J.Åkesson and P. Hagander, "Integral action-A disturbance observer approach," presented at the Proc. Eur. Control Conf. (ECC), Cambridge, U.K., 2003.
31. A. Bemporad, M. Morari, and N. L. Ricker, Model Predictive Control Toolbox. User's Guide. Natick, MA: Mathworks Inc., 2004.
32. M. Karlsson, "Control structures for low-emission combustion in multi-cylinder engines," Licentiate thesis TFRT-3243, Dept. Autom. Control, Lund Univ., Lund, Sweden, 2008.
33. P. Strandh, "HCCI operation-Closed loop combustion control using VVA or dual fuel," Ph.D. dissertation TMHP-06/1039, Dept. Energy Sci., Lund Univ., Lund, Sweden, 2006.
34. G. Haraldsson, "Closed-loop combustion control of a multi cylinder HCCI engine using variable compression ratio and fast thermal management," Ph.D. dissertation TMHP-05/1028, Dept. Heat Power Eng., Lund Inst. Technol., Lund Univ., Lund, Sweden, 2005.
35. B. J. Allison and A. J. Isaksson, "Design and performance of mid-ranging controllers," J. Process Control vol. 8, no. 5-6, pp. 469-474, 1998. [Online]. Available: http://dx.doi.org/10.1016/S0959-1524(98)00012-2 (Pubitemid 128400785)
36. M. Karlsson, K. Ekholm, P. Strandh, R. Johansson, P. Tunestål, and B. Johansson, "Closed-loop control of combustion phasing in an HCCI engine using VVA and variable EGR," in Proc. 5th IFAC Symp. Adv. Autom. Control (AAC), 2007, pp. 517-524.
37. "Real-Time Workshop. User's Guide," Mathworks Inc., Natick, MA, 2006, Mathworks.
38. R. Johansson, System Modeling and Identification. Englewood Cliffs, NJ: Prentice-Hall, 1993.