Scheduling in Supply Chains Using Mixed Integer Programming

Scheduling in Supply Chains Using Mixed Integer Programming

Volumn , Issue , 2011, Pages

  Sawik, Tadeusz ^a  

^a AGH UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Poland)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84891584947     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781118029114     Document Type: Book

References (221)

1. Abadi, I.N.K., N.G. Hall and C. Sriskandarajah (2000). Minimizing cycle time in a blocking flowshop, Operations Research 48, 177-180.
2. Agnetis, A., D. Pacciarelli and F. Rossi (1997). Batch scheduling in a two-machine flow shop with limited buffer, Discrete Applied Mathematics 72(3), 243-260.
3. Agnetis, A., F. Rossi and G. Gristina (1998). An exact algorithm for the batch sequencing problem in a two-machine flow shop with limited buffer, Naval Research Logistics 45(2), 141-164.
4. Agnetis, A., N.G. Hall and D. Pacciarelli (2006). Supply chain scheduling: Sequence coordination, Discrete Applied Mathematics 154, 2044-2063.
5. Ahmadi, J., R. Ahmadi, H. Matsuo and D. Tirupati (1995). Component fixture positioning/sequencing for printed circuit board assembly with concurrent operations, Operations Research 43, 444-457.
6. Aissaoui, N., M. Haouari and E. Hassini (2007). Supplier selection and order lot sizing modeling: A review, Computers & Operations Research 34, 3516-3540.
7. Akkan, C. (1997). Finite-capacity schedulingbased planning for revenue-based capacity managament, European Journal of Operational Research 100, 170-179.
8. Alfieri, A. (2009). Workload simulation and optimisation in multi-criteria hybrid flowshop scheduling: A case study, International Journal of Production Research 47(18), 5129-5145.
9. Alves, M.J. and J. Climaco (2007). A review of interactive methods for multiobjective integer and mixed-integer programming, European Journal of Operational Research 180, 99-115.
10. Amaro, A.C.S. and A.P.F.D. Barbosa-Póvoa (2008). Supply chain management with optimal scheduling, Industrial Engineering and Chemical Research 47(1), 116-132.
11. Anthony, R.N. (1965). Planning and Control Systems. A Framework for Analysis, Division of Research, Harvard Business School, Boston.
12. Arshinder, A. Kanda and S.G. Deshmukh (2008). Supply chain coordination: Perspectives, empirical studies and research directions, International Journal of Production Economics 115, 316-335.
13. Baker, K.R. and D. Trietsch (2009). Principles of Sequencing and Scheduling, Wiley, Hoboken, NJ.
14. Balakrishnan, A. and F. Vanderbeck (1999). A tactical planning model for mixed-model electronics assembly operations, Operations Research 47, 395-409.
15. Bard, J.F., R.W. Clayton and T.A. Feo (1994). Machine setup and component placement in printed circuit board assembly, International Journal of Flexible Manufacturing Systems 6, 5-31.
16. Barut, S.P. and V. Sridharan (2005). Revenue management in order-driven production systems, Decision Sciences 36(2), 287-316.
17. Basnet, C. and J.M.Y. Leung (2005). Inventory lot-sizing with supplier selection, Computers and Operations Research 32, 1-14.
18. Berger, P.D., A. Gerstenfeld and A.Z. Zeng (2004). How many suppliers are best? A Scheduling in Supply Chains Using Mixed Integer Programming. By Tadeusz Sawik # 2011 John Wiley & Sons, Inc. Published 2011 by John Wiley & Sons, Inc. 437 decision-analysis approach, Omega: The International Journal of Management Science 32(1), 9-15.
19. Berger, P.D. and A.Z. Zeng (2006). Single versus multiple sourcing in the presence of risks, Journal of the Operational Research Society 57(3), 250-261.
20. Bertazzi, L. (2003). Rounding off the optimal solution of the economic lot size problem, International Journal of Production Economics 81-82, 385-392.
21. Bertrand, J.W.M., and H.P.G. van Ooijen (2000). Customer order lead times for production based on lead times and tardiness costs, International Journal of Production Economics 64, 257-265.
22. Bilge, U. and G. Ulusoy (1995). A time window approach to simultaneous scheduling of machines and material handling system in an FMS, Operations Research 43, 1058-1070.
23. Blazewicz, J., K. Ecker, G. Schmidt and J.Weglarz (1994). Scheduling in Computer and Manufacturing Systems, Springer, Berlin.
24. Blazewicz, J., K. Ecker, E. Pesch, G. Schmidt and J. Weglarz (2007). Handbook on Scheduling. From Theory to Applications, Springer, Berlin.
25. Brah, S.A. and J.L. Hunsucker (1991). Branch and bound algorithm for the flow shop with multiple processors, European Journal of Operational Research 51, 88-99.
26. Campbell, H.G., R.A. Dudek and M.L. Smith (1970). A heuristic algorithm for the n job, m machine sequencing problem, Management Science 16, B630-B637.
27. Carravilla, M.A. and J. Pinho de Sousa (1995). Hierarchical production planning in a make-to-order company: A case study, European Journal of Operational Research 86, 43-56.
28. Chahar, K. and K. Taaffe (2009). Risk averse demand selection with all-or-nothing orders, Omega: The International Journal of Management Science 37(5), 996-1006.
29. Chandra, P. and M.L. Fisher (1994). Coordination of production and distribution planning, European Journal of Operational Research 72(3), 503-517.
30. Charnsirisaksul, K., P. Griffin and P. Keskinocak (2004). Order selection and scheduling with lead time flexibility, IIE Transactions 36, 697-707.
31. Chaudhry, S.S., F.G. Forst and J.L. Zydiak (1993). Vendor selection with price breaks, European Journal of Operational Research 70, 52-66.
32. Chauhan, S.S., V. Gordon and J.-M. Proth (2007). Scheduling in a supply chain environment, European Journal of Operational Research 183(3), 961-970.
33. Che, Z.H. and H.S. Wang (2008). Supplier selection and supply quantity allocation of common and non-common parts with multiple criteria under multiple products, Computers and Industrial Engineering 55, 110-133.
34. Chen, C.-Y., Z.-Y. Zhao and M.O. Ball (2001). Quantity and due date quoting available to promise, Information Systems Frontiers 3(4), 477-488.
35. Chen, D.-S., R.G. Batson and Y. Dang (2010). Applied Integer Programming: Modeling and Solution, Wiley, Hoboken, NJ.
36. Chen, K. and P. Ji (2007). A mixed integer programming model for advanced planning and scheduling (APS), European Journal of Operational Research 181, 515-522.
37. Chen, Z.-L. (2004). Integrated production and distribution operations: Taxonomy, models and review. In D. Simchi-Levi, S.D. Wu and Z.-J. Shen, Eds., Handbook of Quantitative Supply Chain Analysis: Modeling in the E-Business Era. Kluwer Academic Publishers, Boston, MA.
38. Chen, Z.-L. and G.L. Vairaktarakis (2005). Integrated scheduling of production and distribution operations, Management Science 51(4), 614-628.
39. Chen, Z.-L. and G. Pundoor (2006). Order assignment and scheduling in a supply chain, Operations Research 54(3), 555-572.
40. Chen, Z.-L. and N.G. Hall (2007). Supply chain scheduling: Conflict and cooperation in assembly system, Operations Research 55(6), 1072-1089.
41. Cohen, M.A. and H. Kunreuther (2007). Operations risk management: Overview of Paul Kleindorfer's contributions, Production and Operations Management 16(5), 525-541.
42. Corti, D., A. Pozzetti and M. Zorzini (2006). A capacity-driven approach to establish reliable due dates in MTO environment, International Journal of Production Economics 104, 536-554.
43. Dauzere-Peres, S. and J.-B. Lasserre (1997). Lot streaming in job-shop scheduling, Operations Research 45(4), 584-595.
44. Deane, R.H. and S.H. Moon (1992). Work flow control in the flexible flow line, International Journal of Flexible Manufacturing Systems, 8(3-4), 217-235.
45. Demirtas, E.A. and O. Ustun (2008). An integrated multiobjective decision making process for supplier selection and order allocation, Omega: The International Journal of Management Science 36, 76-90.
46. Dolgui, A., B. Finel, N. Guschinsky, G. Levin and F. Vernadat (2006). MIP approach to balancing transfer lines with blocks of parallel operations, IIE Transactions 38, 869-882.
47. Drexl, A. and A. Kimms (1997). Lotsizing and scheduling-survey and extensions, European Journal of Operational Research 99, 221-235.
48. Ebben, M.J.R., E.W. Hans and F.M. Olde Weghuis (2005). Workload based acceptance in job shop environments, OR Spectrum 27, 107-122.
49. Ellis, K.P., F.J. Vittes and J.E. Kobza (2001). Optimizing the performance of a surface mount placement machine, IEEE Transactions on Electronics Packaging Manufacturing 24(3), 160-170.
50. Erengüc, S.S., N.C. Simpson and A.J. Vakharia (1999). Integrated production/distribution planning in supply chains: An invited review, European Journal of Operational Research, 115, 219-236.
51. Feo, T.A., J.F. Bard and S.D. Holland (1995). Facility-wide planning and scheduling of printed wiring board assembly, Operations Research 43, 219-230.
52. Federgruen, A. and Y.-S. Zheng (1995). Efficient algorithms for finding optimal power-of-two policies for production/distribution systems with general setup costs, Operations Research 43, 458-470.
53. Fourer, R., D.M. Gay and B.W. Kernigham (2003). AMPL, A Modeling Language for Mathematical Programming. Duxbury Press, Pacific Grove, CA.
54. Gallego, G., M. Queyranne and D. Simchi-Levi (1996). Single resource multi-item inventory systems, Operations Research 44, 580-595.
55. Garey, M.R. and D.S. Johnson (1979). Computers and Intractability: A Guide to the Theory of NP-Completeness. W.H. Freeman, San Francisco.
56. Gershwin, S.B., Y. Dallery, Ch.T. Papadopoulos and J. MacGregor Smith, Eds. (2002). Analysis and Modeling of Manufacturing Systems, Springer, New York.
57. Geunes, J., H.E. Romeijn and K. Taaffe (2006). Requirements planning with pricing and order selection flexibility, Operations Research 54(2), 394-401.
58. Ghosh, S. and R.J. Gagnon (1989). A comprehensive literature review and analysis of the design, balancing and scheduling of assembly systems, International Journal of Production Research 27, 637-670.
59. Gotoh, J. and Y. Takano (2007). Newsvendor solutions via conditional value-at-risk minimization, European Journal of Operational Research 179(1), 80-96.
60. Goyal, S.K. and S.G. Deshmukh (1992). Integrated procurement-production systems: A review, European Journal of Operational Research 62, 1-10.
61. Goyal, S.K. and S.G. Deshmukh (1997). Integrated procurement-production system in a just-in-time environment-modeling and analysis, Production Planning and Control 8(1), 31-36.
62. Graves, S.C., H.C. Meal, D. Stefek and A.H. Zeghmi (1983). Scheduling of reentrant flow shops, Journal of Operations Management 3, 197-207.
63. Greene, J.T. and P.R. Sadowski (1986). A mixed integer program for loading and scheduling multiple flexible manufacturing cells, European Journal of Operational Research 24, 379-386.
64. Guinet, A.G.P. and A.A. Solomon (1996). Scheduling hybrid flowshops to minimize maximum tardiness or maximum completion time, International Journal of Production Research 34, 1643-1654.
65. Guschinskaya, O. and A. Dolgui (2010). Comparison of exact and heuristic methods for a transfer line balancing problem, International Journal of Production Economics. 120(2), 276-286.
66. Güder, F., J.L. Zydiak and S.S. Chaudhry (1995). Non-stationary ordering policies for multi-item inventory systems subject to a single resource constraint, Journal of Operational Research Society 46, 1145-1152.
67. Güder, F. and J.L. Zydiak (2000). Fixed cycle ordering policies for capacitated multiple item inventory systems with quantity discounts, Computers & Industrial Engineering 38, 67-77.
68. Hall, N.G., M. Lesaoana and C.N. Potts (2001). Scheduling with fixed delivery dates, Operations Research 49(1), 134-144.
69. Hall, N.G., M.E. Posner and C.N. Potts (1998a). Scheduling with finite capacity output buffers, Operations Research 46, Suppl. No. 3, S84-S89.
70. Hall, N.G., M.E. Posner and C.N. Potts (1998b). Scheduling with finite capacity input buffers, Operations Research 46, Suppl. No. 3, S154-S159.
71. Hall, N.G. and C.N. Potts (2003). Supply chain scheduling: Batching and delivery, Operations Research 51(4), 566-584.
72. Harris, F.H. and J.P. Pinder (1995). Revenue management approach to demand management and order booking in assemble-to-order manufacturing, Journal of Operations Management 13(4), 299-309.
73. Hax, A.C. and H.C. Meal (1975). Hierarchical integration of production planning and scheduling. In M.A. Geisler, Ed., Studies in Management Science, vol. I, Logistics, North Holland, Amsterdam, 53-69.
74. Hegedus, M.G. and W.J. Hopp (2001). Due date setting with supply constraints in systems using MRP. Computers & Industrial Engineering, 39, 293-305.
75. Ho, W., X. Xu and K.D. Prasanta (2010). Multi-criteria decision making approaches for supplier evaluation and selection: A literature review, European Journal of Operational Research 202, 16-24.
76. Hopp, W. and M. Spearman (1996). Factory Physics: Foundations of Manufacturing Management. McGraw-Hill, New York.
77. Hunsucker, J.L. and J.R. Shah (1994). Comparative performance analysis of priority rules in a constrained flow shop with multiple processors environment, European Journal of Operational Research 72, 102-114.
78. Jackson, P.L., W.L. Maxwell and J.A. Muckstadt (1988). Determining optimal reorder intervals in capacitated production/distribution systems, Management Science 35, 938-958.
79. Jain, A., M.E. Johnson and E. Safai (1996). Implementation of setup optimization on the shop floor, Operations Research 44, 843-851.
80. Janak, S.L., C.A. Floudas, J. Kallrath and N. Vormbrock (2006). Production scheduling of a large-scale industrial batch plant. II. Reactive scheduling, Industrial and Engineering Chemistry Research 45(25), 8253-8269.
81. Jayaraman, V., R. Srivastava and W.C. Benton (2006). Supplier selection and order quantity allocation: A comprehensive model, Journal of Supply Chain Management 35(2), 50-58.
82. Jiang, J. and W. Hsiao (1994). Mathematical programming for the scheduling problem with alternate process plans in FMS, Computers and Industrial Engineering 27(10), 15-18.
83. Jin, Z.H., K. Ohno, T. Ito and S.E. Elmaghraby (2002). Scheduling hybrid flowshops in printed circuit board assembly lines, Production and Operations Management 11(2), 216-230.
84. Johnson, S.M. (1954). Optimal two-and three-stage production schedules with setup times included, Naval Research Logistics Quarterly 1, 61-68.
85. Kaczmarczyk, W., T. Sawik, A. Schaller and T.M. Tirpak (2004). Optimal versus heuristic scheduling of surface mount technology lines, International Journal of Production Research 42(10), 2083-2110.
86. Kaczmarczyk, W., T. Sawik, A. Schaller and T. Tirpak (2006). Production planning and coordination in customer driven supply chains, Wybrane Zagadnienia Logistyki Stosowanej 3, 81-89.
87. Kasilingam, R.G. and C.P. Lee (1996). Selection of vendors: A mixed-integer programming approach, Computers and Industrial Engineering 31, 347-350.
88. Kim, Y.-D., H.-G. Lim and M.-W. Park (1996). Search heuristics for a flowshop scheduling problem in a printed circuit board assembly process, European Journal of Operational Research 91, 124-143.
89. Kimms, A. (1997). Multi-Level Lot Sizing and Scheduling: Methods for Capacitated Dynamic and Deterministic Models. Physica, Heidelberg.
90. Kis, T. and E. Pesch (2005). A review of exact solution methods for the non-preemptive multiprocessor flowshop problem, European Journal of Operational Research 164(3), 592-608.
91. Kleindorfer, P.R. and G.H. Saad (2005). Managing disruption risks in supply chains, Production and Operations Management 14(1), 53-68.
92. Kochhar, S. and R.J.T. Morris (1987). Heuristic methods for flexible flow line scheduling, Journal of Manufacturing Systems 6(4), 299-314.
93. Kolisch, R. (2000). Integration of assembly and fabrication for make-to-order production, International Journal of Production Economics 68, 287-306.
94. Kouvelis, P. and S. Karabati (1999). Cyclic scheduling in synchronous production lines, IIE Transactions 31(8), 709-719.
95. Kreipl, S. and J.T. Dickersbach (2008). Scheduling coordination problems in supply chain planning, Annals of Operations Research 106, 103-122.
96. Kumar, R. and H. Li (1995). Integer programming approach to printed circuit board assembly, IEEE Transactions on Components Packaging and Manufacturing Technology B 18, 720-727.
97. Kurz, M.E. and R.G. Askin (2004). Scheduling flexible flow lines with sequence-dependent setup times, European Journal of Operational Research 159(1), 66-82.
98. Kyparisis, G.J. and C. Koulamas (2006). Flexible flowshop scheduling with uniform parallel machines, European Journal of Operational Research 168(3), 985-997.
99. Lee, C.-Y. and G.L. Vairaktarakis (1994). Minimizing makespan in hybrid flowshops, Operations Research Letters 16, 149-158.
100. Lee, C.-Y. and Z.-L. Chen (2001), Machine scheduling with transportation considerations, Journal of Scheduling 4, 3-24.
101. Lee, G.-C. and Y.-D. Kim (2004). A branchand-bound algorithm for a two-stage hybrid flowshop scheduling problem minimizing total tardiness, International Journal of Production Research 42(22), 4731-4743.
102. Lee, W. (2005). A joint economic lot size model for raw material ordering, manufacturing setup, and finished goods delivering, Omega: The International Journal of Management Science 33, 163-174.
103. Lewis, H.F. and S.A. Slotnick (2002). Multi-period job selection: Planning work loads to maximize profit, Computers & Operations Research 29, 1081-1098.
104. Li, L. and Z.B. Zabinsky (2009). Incorporating uncertainty into a supplier selection problem, International Journal of Production Economics doi:10.1016/j.ijpe.2009.11.007.
105. Liao, D.-Y., S.-C. Chang, K.W. Pei and C.-M. Chang (1996). Daily scheduling for R&D semiconductor fabrication, IEEE Transactions on Semiconductor Manufacturing 9, 550-560.
106. Liao, Z. and J. Rittscher (2007). Integration of supplier selection, procurement lot sizing and carrier selection under dynamic demand conditions, International Journal of Production Economics 107, 502-510.
107. Linn, R. and W. Zhang (1999). Hybrid flowshop scheduling: A survey, Computers & Industrial Engineering 37(1-2), 57-61.
108. Liu, C.-Y. and S.-C. Chang (2000). Scheduling flexible flow shops with sequence dependent setup effects, IEEE Transactions on Robotics and Automation 16(4), 408-419.
109. Liu, J. and B.L. MacCarthy (1997). A global MILP model for FMS scheduling, European Journal of Operational Research 100(3), 441-453.
110. Manne, A.S. (1960). On the job-shop scheduling problem, Operations Research 8, 219-223.
111. Markland, R.E., K.H. Darby-Dowman and E.D. Minor (1990). Coordinated production scheduling for make-to-order manufacturing, European Journal of Operational Research 45(2-3), 155-176.
112. Maxwell, W.L. and J.A. Muckstadt (1985). Establishing consistent and realistic reorder intervals in production-distribution systems, Operations Research 33, 1316-1341.
113. McCormick, S.T., M.L. Pinedo, S. Shenker and B. Wolf (1989). Sequencing in an assembly line with blocking to minimize cycle time, Operations Research 37, 925-936.
114. Miller, T.C. (2002). Hierarchical Operations in Supply Chain Planning, Springer, London.
115. Moon, C., Y.H. Lee, C.S. Jeong and J.S. Yun (2008). Integrated process planning and scheduling in a supply chain, Computers and Industrial Engineering 54(4), 1048-1061.
116. Muckstadt, J.A. (1985). Planning component delivery intervals in constrained assembly systems. In S. Axsäter, Ch. Schneeweiss and E. Silver, Eds., Multi-Stage Production Planning and Inventory Control, Springer, Berlin, 132-149.
117. Muckstadt, J.A. and R.O. Roundy (1993). Analysis of multistage production systems. In S.C. Graves, A.H.G. Rinnooy Kan and P.H. Zipkin, Eds., Handbooks in Operations Research and Management Science, vol. 4, North-Holland, Amsterdam, 59-131.
118. Nawaz, M., E.E. Enscore, Jr. and I. Ham (1983). A heuristic algorithm for the m-machine, n-job flow shop sequencing problem, Omega: The International Journal of Management Science 11(1), 91-95.
119. Nemhauser, G.L. and L.A. Wolsey (1999). Integer and Combinatorial Optimization, John Wiley & Sons, New York.
120. Norrman, A. and U. Jansson (2004). Ericsson's proactive risk management approach after a serious sub-supplier accident, International Journal of Physical Distribution and Logistics Management 34(5), 434-456.
121. Nowicki, E. and C. Smutnicki (1996). A fast tabu search algorithm for the permutation flow-shop problem, European Journal of Operational Research 91(1), 160-175.
122. Nowicki, E. and C. Smutnicki (1998). The flow shop with parallel machines: A tabu search approach, European Journal of Operational Research 106, 226-253.
123. Oǧuz, C., F.S. Salman and Z.B. Yalçin (2010). Order acceptance and scheduling decisions in make-to-order systems, International Journal of Production Economics 125, 200-211.
124. Örnek, A., S.Ö zpeynirci and C. Ö ztürk (2010). A note on "A mixed integer programming model for advanced planning and scheduling (APS)," European Journal of Operational Research 203, 784-785.
125. Parlar, M. and D. Perry (1996). Inventory models of future supply uncertainty with single and multiple suppliers, Naval Research Logistics 43, 191-210.
126. Pinedo, M. (2005). Planning and Scheduling in Manufacturing and Services. Springer, New York.
127. Pochet, Y. and L.A. Wolsey (2006). Production Planning by Mixed Integer Programming. Springer, Berlin.
128. Quadt, D. and H. Kuhn (2007). A taxonomy of flexible flow line scheduling procedures, European Journal of Operational Research 178(3), 686-698.
129. Rajendran, C. and D. Chaudhuri (1992). A multistage parallel-processor flowshop problem with minimum flowtime, European Journal of Operational Research 57(1), 111-122.
130. Rangsaritratsamee, R., W.G. Ferrel and M.B. Kurz (2004). Dynamic rescheduling that simultaneously considers efficiency and stability, Computers and Industrial Engineering 46, 1-15.
131. Ribas, I., R. Leisten and J.M. Framinan (2010). Review and classification of hybrid flowshop scheduling problems from a production system and a solutions procedure perspective, Computers & Operations Research 37, 1439-1454.
132. Rockafellar, R.T. and S. Uryasev (2000). Optimization of conditional value-at-risk, Journal of Risk 2(3), 21-41.
133. Rockafellar, R.T. and S. Uryasev (2002). Conditional value-at-risk for general loss distributions, Journal of Banking and Finance 26(7), 1443-1471.
134. Rom, W. and S.A. Slotnick (2009). Order acceptance using genetic algorithms, Computers and Operations Research 36, 1758-1767.
135. Rosenblatt, M.J. and U.G. Rothblum (1990). On the single resource capacity problem for multi-item inventory system, Operations Research 38, 686-693.
136. Ruiz, R. and J.A. Vazquez-Rodriguez (2010). The hybrid flow shop scheduling problem, European Journal of Operational Research 205, 1-18.
137. Ruiz-Torres, A.J. and M. Farzad (2007). The optimal number of suppliers considering the costs of individual supplier failures, Omega: The International Journal of Management Science 35(1), 104-115.
138. Röslof, J., I. Harjunkoski, J. Björkqvist, S. Karlsson and T. Westerlund (2001). An MILP-based reordering algorithm for complex industrial scheduling and rescheduling, Computers and Chemical Engineering 25, 821-828.
139. Röslof, J., I. Harjunkoski, T. Westerlund and J. Isaksson (2002). Solving a large scale industrial scheduling problem using MILP combined with a heuristic procedure, European Journal of Operational Research 138, 29-42.
140. Salvador, M.S. (1973). A solution to a special class of flowshop scheduling problems. In S.E. Elmaghraby, Ed., Symposium on the Theory of Scheduling and Its Applications. Berlin: Springer, 83-91.
141. Sanayei, A., S.F. Mousavi, M.R. Abdi and A. Mohaghar (2008). An integrated group decision-making process for supplier selection and order allocation using multi-attribute utility theory and linear programming, Journal of the Franklin Institute 345(7), 731-747.
142. Sarmiento, A.M. and R. Nagi (1999). A review of integrated analysis of production distribution systems, IIE Transactions 31, 1061-1074.
143. Sarykalin, S., G. Serraino and S. Uryasev (2008). Value-at-risk vs. conditional value-at-risk in risk management and optimization, Tutorials in Operations Research, INFORMS 2008, 270-294.
144. Sawik, T. (1977). Stochastic optimal control of a multi-facility, multi-product production scheduling with random times of supplies, Control and Cybernetics 6(3-4), 21-35.
145. Sawik, T. (1990). Modelling and scheduling of a flexible manufacturing system, European Journal of Operational Research 45, 177-190.
146. Sawik, T. (1993). A scheduling algorithm for flexible flow lines with limited intermediate buffers, Applied Stochastic Models and Data Analysis, Special issue on Manufacturing Systems 9, 127-138.
147. Sawik, T. (1994). New algorithms for scheduling flexible flow lines. In Proceedings of Japan-U.S.A. Symposium on Flexible Automation. Kob, July 11-18, 3, 1091-1096.
148. Sawik, T. (1995a). Integer programming models for the design and balancing of flexible assembly systems, Mathematical and Computer Modelling 21(4), 1-12.
149. Sawik, T. (1995b). Scheduling flexible flow lines with no in-process buffers, International Journal of Production Research 33, 1359-1370.
150. Sawik, T. (1996). A multilevel machine and vehicle scheduling in a flexible manufacturing system, Mathematical & Computer Modelling 23(7), 45-57.
151. Sawik, T. (1998a). A lexicographic approach to bi-objective loading of a flexible assembly system, European Journal of Operational Research 107(3), 658-668.
152. Sawik, T. (1998b). Simultaneous loading, routing and assembly plan selection in a flexible assembly system, Mathematical and Computer Modelling 28(9), 19-29.
153. Sawik, T. (1999). Production Planning and Scheduling in Flexible Assembly Systems, Springer-Verlag, Berlin.
154. Sawik, T. (2000a). Mixed integer programming for scheduling flexible flow lines with limited intermediate buffers, Mathematical and Computer Modelling 31, 39-52.
155. Sawik, T. (2000b). Simultaneous versus sequential loading and scheduling of flexible assembly systems, International Journal of Production Research 38, 3267-3282.
156. Sawik, T. (2000c). An LP-based approach for loading and routing in a flexible assembly line, International Journal of Production Economics 64(1-3), 49-58.
157. Sawik, T. (2001). Mixed integer programming for scheduling surface mount technology lines, International Journal of Production Research 39, 3219-3235.
158. Sawik, T. (2002a). Balancing and scheduling of surface mount technology lines, International Journal of Production Research 40(9), 1973-1991.
159. Sawik, T. (2002b). Monolithic vs. hierarchical balancing and scheduling of a flexible assembly line, European Journal of Operational Research 143(1), 115-124.
160. Sawik, T. (2002c). An exact approach for batch scheduling in flexible flow lines with limited intermediate buffers, Mathematical and Computer Modelling 36, 461-471.
161. Sawik, T. (2004). Loading and scheduling of a flexible assembly system by mixed integer programming, European Journal of Operational Research 154(1), 1-19.
162. Sawik, T. (2005a). Integer programming approach to production scheduling for make-to-order manufacturing, Mathematical and Computer Modelling 41(1), 99-118.
163. Sawik, T. (2005b). A cyclic versus flexible approach to materials ordering in make-toorder assembly, Mathematical and Computer Modelling 42(3-4), 279-290.
164. Sawik, T. (2006). Hierarchical approach to production scheduling in make-to-order assembly, International Journal of Production Research 44(4), 801-830.
165. Sawik, T. (2007a). A multi-objective customer orders assignment and resource leveling in make-to-order manufacturing, International Transactions in Operational Research 14(6), 491-508.
166. Sawik, T. (2007b). Multi-objective master production scheduling in make-to-order manufacturing, International Journal of Production Research 45(12), 2629-2653.
167. Sawik, T. (2007c). A lexicographic approach to bi-objective scheduling of single-period orders in make-to-order manufacturing, European Journal of Operational Research 180(3), 1060-1075.
168. Sawik, T. (2007d). Integer programming approach to reactive scheduling in maketo-order manufacturing, Mathematical and Computer Modelling 46(11-12), 1373-1387.
169. Sawik, T. (2009a). Multi-objective due-date setting in a make-to-order environment, International Journal of Production Research 47(22), 6205-6231.
170. Sawik, T. (2009b). Monolithic versus hierarchical approach to integrated scheduling in a supply chain, International Journal of Production Research 47(21), 5881-5910.
171. Sawik, T. (2009c). Coordinated supply chain scheduling, International Journal of Production Economics 120(2), 437-451.
172. Sawik, T. (2010a). Single vs. multiple objective supplier selection in a make to order environment, Omega: The International Journal of Management Science 38(3-4), 203-212.
173. Sawik, T. (2010b). A bi-objective supply chain scheduling. In K.D. Lawrence, R.K. Klimberg and V.M. Miori, Eds., The Supply Chain in Manufacturing, Distribution, and Transportation: Modeling, Optimization, and Applications. CRC Press, Boca Raton, FL.
174. Sawik, T. (2011a). Selection of supply portfolio under disruption risks, Omega: The International Journal of Management Science 39(2), 194-208.
175. Sawik, T. (2011b). Selection of a dynamic supply portfolio in make-to-order environment with risks, Computers & Operations Research 38(4), 782-796.
176. Sawik, T., A. Schaller and T.M. Tirpak (2000). Issues in loading and scheduling of SMT lines, Zeszyty Naukowe PolitechnikiŚ laskiej, Automatyka, no. 129, 331-341.
177. Sawik, T., A. Schaller and T.M. Tirpak (2002). Scheduling of printed wiring board assembly in surface mount technology lines, Journal of Electronics Manufacturing, special issue on Production Planning and Scheduling in Electronics Manufacturing 11(1), 1-17.
178. Schmidt, G. (2000). Scheduling with limited machine availability, European Journal of Operational Research 121, 1-15.
179. Schneeweiss, Ch. (1999). Hierarchies in Distributed Decision Making, Springer-Verlag, Berlin.
180. Schneeweiss, Ch. and K. Zimmer (2004). Hierarchical coordination mechanism within the supply chain, European Journal of Operational Research 154, 687-703.
181. Scholl, A. (1999). Balancing and Sequencing of Assembly Lines. Physica-Verlag, Heidelberg.
182. Shanthikumar, J.G., D.D. Yao, W. Henk and M. Zijm, Eds. (2003). Stochastic Modeling and Optimization of Manufacturing Systems and Supply Chains. Springer, New York.
183. Shapiro, J.F. (1993). Mathematical programming models and methods for production planning and scheduling. In S.C. Graves, A.H.G. Rinnooy Kan and P.H. Zipkin, Eds., Handbook in Operations Research and Management Science: Logistics of Production and Inventory. North-Holland, Amsterdam.
184. Shapiro, J.F. (2001). Modeling the Supply Chain. Duxbury Press, Pacific Grove, CA.
185. Sheffi, Y. (2005). The Resilient Enterprise. MIT Press, Cambridge, MA.
186. Silver, E.A., D.F. Pyke and R. Petersen (1998). Inventory Management and Production Planning and Scheduling. John Wiley & Sons, New York.
187. Slotnick, S.A. and T.E. Morton (1996). Selecting jobs for a heavily loaded shop with lateness penalties, Computers & Operations Research 23(2), 131-140.
188. Slotnick, S.A. and T.E. Morton (2007). Order acceptance with weighted tardiness, Computers and Operations Research 34(10), 3029-3042.
189. Smith, S.F. (1995). Reactive scheduling systems, In D.E. Brown and W.T. Scherer, Eds., Intelligent Scheduling Systems. Kluwer Academic Publishers, Boston, 155-192.
190. Stadtler, H. (2005). Supply chain management and advanced planning-basics, overview and challenges, European Journal of Operational Research 163, 575-588.
191. Steuer, R.E. (1986). Multiple Criteria Optimization: Theory, Computation, and Applications. John Wiley & Sons, New York.
192. Sun, D. and D. Atkins (1997). 98%-effective lot-sizing for assembly inventory systems with backlogging, Operations Research 45, 940-951.
193. Sun, J. and D. Xue (2001). A dynamic reactive scheduling mechanism for responding to changes of production orders and manufacturing resources, Computers in Industry 46, 189-207.
194. Talluri, K.T. and G.J. van Ryzin (2004). The Theory and Practice of Revenue Management. Kluwer Academic Publishers, Boston.
195. Tang, C.S. (2006). Perspectives in supply chain risk management, International Journal of Production Economics 103, 451-488.
196. Tempelmeier, H. and M.C. Derstroff (1996). A Lagrangian-based heuristic for dynamic multi-level, multi-item constrained lot sizing with setup times, Management Science 42(5), 738-747.
197. Thomas, D.J. and P.M. Griffin (1996). Coordinated supply chain management, European Journal of Operational Research 94(1), 1-15.
198. Tirpak, T.M. (2000). Design-to-manufacturing information management for electronics assembly, International Journal of Flexible Manufacturing Systems 12(2), 189-205.
199. Tseng, F.T., E.F. Stafford, Jr. and J.N.D. Gupta (2004). An empirical analysis of integer programming formulations for the permutation flowshop. Omega: The International Journal of Management Science 32, 285-293.
200. Ulusoy, G. and U. Bilge (1993). Simultaneous scheduling of machines and automated guided vehicles, International Journal of Production Research 31, 2857-2873.
201. Uryasev, S. (2000). Conditional value-at-risk: Optimization algorithms and applications, Financial Engineering News 14, February, 1-5.
202. Ustun, O. and E.A. Demirtas (2008). An integrated multi-objective decision making process for multi-period lot sizing with supplier selection, Omega: The International Journal of Management Science 36, 509-521.
203. Van der Vaart, T. and D.P. Van Donk (2008). A critical review of survey-based research in supply chain integration, International Journal of Production Economics 111, 42-55.
204. Vieira, G.E., J.W. Herrman and E. Lin (2003). Rescheduling manufacturing systems: A framework of strategies, policies and methods, Journal of Scheduling 6(1), 39-62.
205. Vignier, A., J.C. Billaut and C. Proust (1999). Hybrid flowshop scheduling problems: State of the art, Rairo-Recherche Operationnelle-Operations Research 33(2), 117-183.
206. Voss, S. and D.L. Woodruff (2003). Introduction to Computational Optimization Models for Production Planning in a Supply Chain, Springer-Verlag, Berlin.
207. Wagner, H.M. (1959). An integer linearprogramming model for machine scheduling, Naval Research Logistics Quarterly 6, 131-140.
208. Wang, H. (2005). Flexible flowshop scheduling: Optimum, heuristics and artificial intelligence solutions, Expert Systems 22(2), 78-85.
209. Wang, W., P.C. Nelson and T.M. Tirpak (2000). Optimization of high-speed multistation SMT placement machines using evolutionary algorithms, IEEE Transactions on Electronics Packaging Manufacturing 22(2), 137-146.
210. Weber, C.A. and J.R. Current (1993). A multiobjective approach to vendor selection, European Journal of Operational Research 68, 173-184.
211. Wester, F.A.W., J. Wijngaard and W.H.M. Zijm (1992). Order acceptance strategies in a production-to-order environment with setup times and due dates, International Journal of Production Research 30(4), 1313-1326.
212. Wilson, J.M. (1989). Alternative formulations of a flow-shop scheduling problem, Journal of the Operational Research Society 40, 395-399.
213. Wittrock, R.J. (1985). Scheduling algorithms for flexible flow lines, IBM Journal of Research and Development 29, 401-412.
214. Wittrock, R.J. (1988). An adaptable scheduling algorithm for flexible flow lines, Operations Research 36, 445-453.
215. Wolsey, L.A. (1998). Integer Programming, John Wiley & Sons, New York.
216. Wu, D. and D.L. Olson (2008). Supply chain risk, simulation, and vendor selection, International Journal of Production Economics 114, 646-655.
217. Xia, W. and Z. Wu (2007). Supplier selection with multiple criteria in volume discount environments, Omega: The International Journal of Management Science 35, 494-504.
218. Yu, H., A.Z. Zeng and L. Zhao (2009). Single or dual sourcing: Decision-making in the presence of supply chain disruption risks, Omega: The International Journal of Management Science 37, 788-800.
219. Yue, J., Y. Xia and T. Tran (2010). Selecting sourcing partners for a make-to-order supply chain, Omega: The International Journal of Management Science 38(3-4), 136-144.
220. Zipkin, P.H. (2000). Foundations of Inventory Management, McGraw-Hill, New York.
221. Zorzini, M., D. Corti and A. Pozzetti (2008). Due date (DD) quotation and capacity planning in make-to-order companies: Results from an empirical analysis, International Journal of Production Economics 112, 919-933.