Identification and compensation of piezoelectric hysteresis without modeling hysteresis inverse

IEEE Transactions on Industrial Electronics

Volumn 60, Issue 9, 2013, Pages 3927-3937

  Xu, Qingsong ^a  

^a UNIVERSITY OF MACAU   (Macao)

Author keywords

Hysteresis model; micro nanopositioning; motion control; piezoelectric actuator

Indexed keywords

HYSTERESIS LOOPS; MOTION CONTROL; PIEZOELECTRIC ACTUATORS;

FEEDFORWARD HYSTERESIS; HYSTERESIS COMPENSATION; HYSTERESIS IDENTIFICATION; HYSTERESIS MODELS; LEAST SQUARES SUPPORT VECTOR MACHINES; MICRO-/NANOPOSITIONING; PIEZOELECTRIC HYSTERESIS; SMART ACTUATOR SYSTEMS;

HYSTERESIS;

EID: 84876048369     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2012.2206339     Document Type: Article

References (36)

1. H.-J. Shieh, F.-J. Lin, P.-K. Huang, and L.-T. Teng, "Adaptive displacement control with hysteresis modeling for piezoactuated positioning mechanism," IEEE Trans. Ind. Electron., vol. 53, no. 3, pp. 905-914, Jun. 2006. (Pubitemid 43834610)
2. H. C. Liaw and B. Shirinzadeh, "Robust adaptive constrained motion tracking control of piezo-actuated flexure-based mechanisms for micro/nano manipulation," IEEE Trans. Ind. Electron., vol. 58, no. 4, pp. 1406-1415, Apr. 2011.
3. S. Polit and J. Dong, "Development of a high-bandwidth XY nanopositioning stage for high-rate micro-/nanomanufacturing," IEEE/ASME Trans. Mechatron., vol. 16, no. 4, pp. 724-733, Aug. 2011.
4. P. A. Sente, F. M. Labrique, and P. J. Alexandre, "Efficient control of a piezoelectric linear actuator embedded into a servo-valve for aeronautic applications," IEEE Trans. Ind. Electron., vol. 59, no. 4, pp. 1971-1979, Apr. 2012.
5. Y. K. Yong, K. Liu, and S. O. R. Moheimani, "Reducing cross-coupling in a compliant XY nanopositioner for fast and accurate raster scanning," IEEE Trans. Control Syst. Technol., vol. 18, no. 5, pp. 1172-1179, Sep. 2010.
6. J. Minase, T.-F. Lu, B. Cazzolato, and S. Grainger, "A review, supported by experimental results, of voltage, charge and capacitor insertion method for driving piezoelectric actuators," Precis. Eng., vol. 34, no. 4, pp. 692-700, 2010.
7. X. Tan and J. S. Baras, "Adaptive identification and control of hysteresis in smart materials," IEEE Trans. Autom. Control, vol. 50, no. 6, pp. 827-839, Jun. 2005. (Pubitemid 40902706)
8. M. Ruderman, F. Hoffmann, and T. Bertram, "Modeling and identification of elastic robot joints with hysteresis and backlash," IEEE Trans. Ind. Electron., vol. 56, no. 10, pp. 3840-3847, Oct. 2009.
9. K. Kuhnen, "Modeling, identification and compensation of complex hysteretic nonlinearities: A modified Prandtl-Ishlinskii approach," Eur. J. Control, vol. 9, no. 4, pp. 407-421, 2003.
10. Y. Li and Q. Xu, "Adaptive sliding mode control with perturbation estimation and PID sliding surface for motion tracking of a piezo-driven micromanipulator," IEEE Trans. Control Syst. Technol., vol. 18, no. 4, pp. 798-810, Jul. 2010.
11. J. Yi, S. Chang, and Y. Shen, "Disturbance observer-based hysteresis compensation for piezoelectric actuators," IEEE/ASME Trans. Mechatron., vol. 14, no. 4, pp. 456-464, Aug. 2009.
12. J.-X. Xu and K. Abidi, "Discrete-time output integral sliding-mode control for a piezomotor-driven linear motion stage," IEEE Trans. Ind. Electron., vol. 55, no. 11, pp. 3917-3926, Nov. 2008.
13. X. Chen and T. Hisayama, "Adaptive sliding-mode position control for piezo-actuated stage," IEEE Trans. Ind. Electron., vol. 55, no. 11, pp. 3927-3934, Nov. 2008.
14. X. Yu and O. Kaynak, "Sliding mode control with soft computing: A survey," IEEE Trans. Ind. Electron., vol. 56, no. 9, pp. 3275-3285, Sep. 2009.
15. Q. Xu and Y. Li, "Micro-/nanopositioning using model predictive output integral discrete sliding mode control," IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 1161-1170, Feb. 2012.
16. Y. Wu and Q. Zou, "Robust-inversion-based 2-DOF control design for output tracking: Piezoelectric actuator example," IEEE Trans. Control Syst. Technol., vol. 17, no. 5, pp. 1069-1082, Sep. 2009.
17. R. Wang, G.-P. Liu, W. Wang, D. Rees, and Y.-B. Zhao, "Hr control for networked predictive control systems based on the switched Lyapunov function method," IEEE Trans. Ind. Electron., vol. 57, no. 10, pp. 3565-3571, Oct. 2010.
18. C.-L. Hwang, "Microprocessor-based fuzzy decentralized control of 2-D piezo-driven systems," IEEE Trans. Ind. Electron., vol. 55, no. 3, pp. 1411-1420, Mar. 2008. (Pubitemid 351447582)
19. H.-P. Huang, J.-L. Yan, and T.-H. Cheng, "Development and fuzzy control of a pipe inspection robot," IEEE Trans. Ind. Electron., vol. 57, no. 3, pp. 1088-1095, Mar. 2010.
20. C.-H. Wang and D.-Y. Huang, "A new intelligent fuzzy controller for nonlinear hysteretic electronic throttle in modern intelligent automobiles," IEEE Trans. Ind. Electron., vol. 60, no. 6, pp. 2332-2345, Jun. 2013.
21. T. Orlowska-Kowalska, M. Dybkowski, and K. Szabat, "Adaptive slidingmode neuro-fuzzy control of the two-mass induction motor drive without mechanical sensors," IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 553-564, Feb. 2010.
22. W. T. Ang, P. K. Khosla, and C. N. Riviere, "Feedforward controller with inverse rate-dependent model for piezoelectric actuators in trajectorytracking applications," IEEE/ASME Trans. Mechatron., vol. 12, no. 2, pp. 134-142, Apr. 2007. (Pubitemid 46629536)
23. M. Al Janaideh, S. Rakheja, and C. Su, "An analytical generalized Prandtl-Ishlinskii model inversion for hysteresis compensation in micropositioning control," IEEE/ASME Trans. Mechatron., vol. 16, no. 4, pp. 734-744, Aug. 2011.
24. K. K. Leang, Q. Zou, and S. Devasia, "Feedforward control of piezoactuators in atomic force microscope systems: Inversion-based compensation for dynamics and hysteresis," IEEE Control Syst. Mag., vol. 29, no. 1, pp. 70-82, Feb. 2009.
25. S. W. John, G. Alici, and C. D. Cook, "Inversion-based feedforward control of polypyrrole trilayer bender actuators," IEEE/ASME Trans. Mechatron., vol. 15, no. 1, pp. 149-156, Feb. 2010.
26. J.-C. Shen, W.-Y. Jywe, H.-K. Chiang, and Y.-L. Shu, "Precision tracking control of a piezoelectric-actuated system," Precis. Eng., vol. 32, no. 2, pp. 71-78, Apr. 2008. (Pubitemid 351240986)
27. Y. Li and Q. Xu, "A novel piezoactuated XY stage with parallel, decoupled, and stacked flexure structure for micro-/nanopositioning," IEEE Trans. Ind. Electron., vol. 58, no. 8, pp. 3601-3615, Aug. 2011.
28. M. Rakotondrabe, "Bouc-Wen modeling and inverse multiplicative structure to compensate hysteresis nonlinearity in piezoelectric actuators," IEEE Trans. Autom. Sci. Eng., vol. 8, no. 2, pp. 428-431, Apr. 2011.
29. M. A. Janaideh, S. Rakheja, and C.-Y. Su, "Experimental characterization and modeling of rate-dependent hysteresis of a piezoceramic actuator," Mechatronics, vol. 19, no. 5, pp. 656-670, Aug. 2009.
30. S. Yu, G. Alici, B. Shirinzadeh, and J. Smith, "Sliding mode control of a piezoelectric actuator with neural network compensating rate-dependent hysteresis," in Proc. IEEE Int. Conf. Robot. Autom., Barcelona, Spain, 2005, pp. 3641-3645. (Pubitemid 46084349)
31. R. Dong, Y. Tan, H. Chen, and Y. Xie, "A neural networks based model for rate-dependent hysteresis for piezoelectric actuators," Sens. Actuator A, Phys., vol. 143, no. 2, pp. 370-376, 2008. (Pubitemid 351459586)
32. J. A. K. Suykens, "Support vector machines: A nonlinear modeling and control perspective," Eur. J. Control, vol. 7, no. 2/3, pp. 311-327, 2001. (Pubitemid 33760351)
33. J. A. K. Suykens and J. Vandewalle, "Least squares support vector machine classifiers," Neural Process. Lett., vol. 9, no. 3, pp. 293-300, 1999.
34. Q. Xu and P.-K. Wong, "Hysteresis modeling and compensation of a piezostage using least squares support vector machines," Mechatronics, vol. 21, no. 7, pp. 1239-1251, Oct. 2011.
35. P.-K. Wong, Q. Xu, C.-M. Vong, and H.-C. Wong, "Rate-dependent hysteresis modeling and control of a piezostage using online support vector machine and relevance vector machine," IEEE Trans. Ind. Electron., vol. 59, no. 4, pp. 988-2001, Apr. 2012.
36. C.-J. Lin and S.-Y. Chen, "Evolutionary algorithm based feedforward control for contouring of a biaxial piezo-actuated stage," Mechatronics, vol. 19, no. 6, pp. 829-839, 2009.