A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering

Biomaterials

Volumn 33, Issue 26, 2012, Pages 6020-6041

  Billiet, Thomas ^a   Vandenhaute, Mieke ^a   Schelfhout, Jorg ^a   Van Vlierberghe, Sandra ^a   Dubruel, Peter ^a  

^a GHENT UNIVERSITY   (Belgium)

Author keywords

Hydrogel; Photolithography; Rapid prototyping; Scaffold

Indexed keywords

3-DIMENSIONAL; 3-DIMENSIONAL STRUCTURES; CAN DESIGN; CELL ENCAPSULATIONS; CELL SEEDING; CURRENT TRENDS; FABRICATED STRUCTURES; HARD TISSUES; HYDROGEL SCAFFOLDS; HYDROGEL STRUCTURE; MECHANICAL INTEGRITY; RAPID PROTOTYPING TECHNOLOGY; SEEDING EFFICIENCY; TISSUE ENGINEERING SCAFFOLD;

PHOTOLITHOGRAPHY; RAPID PROTOTYPING; SCAFFOLDS; SCAFFOLDS (BIOLOGY); TISSUE;

HYDROGELS;

GELATIN; HYALURONIC ACID; MACROGOL; TISSUE SCAFFOLD;

CARTILAGE CELL; CELL CULTURE; CELL INTERACTION; CELL SURVIVAL; CELL VIABILITY; ENCAPSULATION; EXTRACELLULAR MATRIX; FEASIBILITY STUDY; GEOMETRY; HYDROGEL; HYDROLYSIS; LASER; LOW TEMPERATURE PROCEDURES; MICROTECHNOLOGY; POROSITY; PRINTING; PRIORITY JOURNAL; PROCESS CONTROL; REVIEW; ROBOTICS; TISSUE ENGINEERING; TISSUE REGENERATION; VISCOSITY;

HYDROGEL; STRESS, MECHANICAL; TISSUE ENGINEERING; TISSUE SCAFFOLDS;

EID: 84862869528     PISSN: 01429612     EISSN: 18785905     Source Type: Journal    
DOI: 10.1016/j.biomaterials.2012.04.050     Document Type: Review

References (297)

1. OPTN Donation and transplantation 2012, Online, Available from URL:. http://optn.transplant.hrsa.gov/about/.
2. Wolfe R.A., Roys E.C., Merion R.M. Trends in organ donation and transplantation in the United States 1999-2008. Am J Transplant 2010, 10:961-972.
3. Desmet T., Schacht E., Dubruel P. Rapid prototyping as an elegant production tool for polymeric tissue engineering scaffolds: a review. Tissue engineering: roles, materials and applications 2008, 141-189. Nova Science Publishers, New York. S.J. Barnes, L.P. Harris (Eds.).
4. Langer R., Vacanti J.P. Tissue engineering. Science 1993, 260:920-926.
5. Bonassar L.J., Vacanti C.A. Tissue engineering: the first decade and beyond. J Cell Biochem 1998, 297-303.
6. Griffith L.G., Naughton G. Tissue engineering - current challenges and expanding opportunities. Science 2002, 295:1009-1014.
7. Chen Q.Z., Harding S.E., Ali N.N., Lyon A.R., Boccaccini A.R. Biomaterials in cardiac tissue engineering: ten years of research survey. Mat Sci Eng R-Rep 2008, 59:1-37.
8. Gerlier L., Lamotte M., Wille M., Dubois D. Cost-utility of autologous chondrocytes implantation using chondrocelect (r) in symptomatic knee cartilage damage in belgium. Value Health 2009, 12:A443.
9. Hayashi R., Yamato M., Takayanagi H., Oie Y., Kubota A., Hori Y., et al. Validation system of tissue-engineered epithelial cell sheets for corneal regenerative medicine. Tissue Eng Pt C-Meth 2010, 16:553-560.
10. Asakawa N., Shimizu T., Tsuda Y., Sekiya S., Sasagawa T., Yamato M., et al. Pre-vascularization of in vitro three-dimensional tissues created by cell sheet engineering. Biomaterials 2010, 31:3903-3909.
11. Sasagawa T., Shimizu T., Sekiya S., Haraguchi Y., Yamato M., Sawa Y., et al. Design of prevascularized three-dimensional cell-dense tissues using a cell sheet stacking manipulation technology. Biomaterials 2010, 31:1646-1654.
12. Barcili B. Hydrogels for tissue engineering and delivery of tissue-inducing substances. J Pharm Sci 2007, 96:2197-2223.
13. Ilkhanizadeh S., Teixeira A.I., Hermanson O. Inkjet printing of macromolecules on hydrogels to steer neural stem cell differentiation. Biomaterials 2007, 28:3936-3943.
14. Chen F.M., Shelton R.M., Jin Y., Chapple I.L.C. Localized delivery of growth factors for periodontal tissue regeneration: role, strategies, and perspectives. Med Res Rev 2009, 29:472-513.
15. Ma P.X. Scaffolds for tissue fabrication. Mater Today 2004, 7:30-40.
16. Butler D.L., Shearn J.T., Juncosa N., Dressler M.R., Hunter S.A. Functional tissue engineering parameters toward designing repair and replacement strategies. Clin Orthop Relat R 2004, S190-S199.
17. Peltola S.M., Melchels F.P.W., Grijpma D.W., Kellomaki M. A review of rapid prototyping techniques for tissue engineering purposes. Ann Med 2008, 40:268-280.
18. Yeong W.Y., Chua C.K., Leong K.F., Chandrasekaran M. Rapid prototyping in tissue engineering: challenges and potential. Trends Biotechnol 2004, 22:643-652.
19. Sachlos E., Czernuszka J.T. Making tissue engineering scaffolds work. review: the application of solid freeform fabrication technology to the production of tissue engineering scaffolds. Eur Cell Mater 2003, 5:29-39.
20. Martin I., Wendt D., Heberer M. The role of bioreactors in tissue engineering. Trends Biotechnol 2004, 22:80-86.
21. Stephens J.S., Cooper J.A., Phelan F.R., Dunkers J.P. Perfusion flow bioreactor for 3d in situ imaging: investigating cell/biomaterials interactions. Biotechnol Bioeng 2007, 97:952-961.
22. Awad H.A., Wickham M.Q., Leddy H.A., Gimble J.M., Guilak F. Chondrogenic differentiation of adipose-derived adult stem cells in agarose, alginate, and gelatin scaffolds. Biomaterials 2004, 25:3211-3222.
23. Benoit D.S.W., Schwartz M.P., Durney A.R., Anseth K.S. Small functional groups for controlled differentiation of hydrogel-encapsulated human mesenchymal stem cells. Nat Mater 2008, 7:816-823.
24. Chenite A., Chaput C., Wang D., Combes C., Buschmann M.D., Hoemann C.D., et al. Novel injectable neutral solutions of chitosan form biodegradable gels in situ. Biomaterials 2000, 21:2155-2161.
25. Elisseeff J., Anseth K., Sims D., McIntosh W., Randolph M., Langer R. Transdermal photopolymerization for minimally invasive implantation. P Natl Acad Sci USA 1999, 96:3104-3107.
26. Nicodemus G.D., Bryant S.J. Cell encapsulation in biodegradable hydrogels for tissue engineering applications. Tissue Eng Pt B-Rev 2008, 14:149-165.
27. Williams C.G., Kim T.K., Taboas A., Malik A., Manson P., Elisseeff J. In vitro chondrogenesis of bone marrow-derived mesenchymal stem cells in a photopolymerizing hydrogel. Tissue Eng 2003, 9:679-688.
28. Vinatier C., Magne D., Weiss P., Trojani C., Rochet N., Carle G.F., et al. A silanized hydroxypropyl methylcellulose hydrogel for the three-dimensional culture of chondrocytes. Biomaterials 2005, 26:6643-6651.
29. Schmedlen K.H., Masters K.S., West J.L. Photocrosslinkable polyvinyl alcohol hydrogels that can be modified with cell adhesion peptides for use in tissue engineering. Biomaterials 2002, 23:4325-4332.
30. Masters K.S., Shah D.N., Leinwand L.A., Anseth K.S. Crosslinked hyaluronan scaffolds as a biologically active carrier for valvular interstitial cells. Biomaterials 2005, 26:2517-2525.
31. Liu V.A., Bhatia S.N. Three-dimensional photopatterning of hydrogels containing living cells. Biomed Microdevices 2002, 4:257-266.
32. Tsang V.L., Chen A.A., Cho L.M., Jadin K.D., Sah R.L., DeLong S., et al. Fabrication of 3d hepatic tissues by additive photopatterning of cellular hydrogels. FASEB J 2007, 21:790-801.
33. Hoffman A.S. Hydrogels for biomedical applications. Adv Drug Deliver Rev 2002, 54:3-12.
34. McGuigan A.P., Sefton M.V. Modular tissue engineering: fabrication of a gelatin-based construct. J Tissue Eng Regen M 2007, 1:136-145.
35. van Susante J.L.C., Buma P., Schuman L., Homminga G.N., van den Berg W.B., Veth R.P.H. Resurfacing potential of heterologous chondrocytes suspended in fibrin glue in large full-thickness defects of femoral articular cartilage: an experimental study in the goat. Biomaterials 1999, 20:1167-1175.
36. Fussenegger M., Meinhart J., Hobling W., Kullich W., Funk S., Bernatzky G. Stabilized autologous fibrin-chondrocyte constructs for cartilage repair in vivo. Ann Plas Surg 2003, 51:493-498.
37. Matsusaki M., Yoshida H., Akashi M. The construction of 3d-engineered tissues composed of cells and extracellular matrices by hydrogel template approach. Biomaterials 2007, 28:2729-2737.
38. Yao R., Zhang R.J., Yan Y.N., Wang X.H. In vitro angiogenesis of 3d tissue engineered adipose tissue. J Bioact Compat Pol 2009, 24:5-24.
39. Bian W.N., Bursac N. Engineered skeletal muscle tissue networks with controllable architecture. Biomaterials 2009, 30:1401-1412.
40. Bryant S.J., Anseth K.S. The effects of scaffold thickness on tissue engineered cartilage in photocrosslinked poly(ethylene oxide) hydrogels. Biomaterials 2001, 22:619-626.
41. Bryant S.J., Nicodemus G.D., Villanueva I. Designing 3d photopolymer hydrogels to regulate biomechanical cues and tissue growth for cartilage tissue engineering. Pharm Res 2008, 25:2379-2386.
42. Endres M., Hutmacher D.W., Salgado A.J., Kaps C., Ringe J., Reis R.L., et al. Osteogenic induction of human bone marrow-derived mesenchymal progenitor cells in novel synthetic polymer-hydrogel matrices. Tissue Eng 2003, 9:689-702.
43. Fedorovich N.E., Alblas J., de Wijn J.R., Hennink W.E., Verbout A.J., Dhert W.J.A. Hydrogels as extracellular matrices for skeletal tissue engineering: state-of-the-art and novel application in organ printing. Tissue Eng 2007, 13:1905-1925.
44. Fedorovich N.E., Dewijn J.R., Verbout A.J., Alblas J., Dhert W.J.A. Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing. Tissue Eng Pt A 2008, 14:127-133.
45. Fragonas E., Valente M., Pozzi-Mucelli M., Toffanin R., Rizzo R., Silvestri F., et al. Articular cartilage repair in rabbits by using suspensions of allogenic chondrocytes in alginate. Biomaterials 2000, 21:795-801.
46. Hauselmann H.J., Fernandes R.J., Mok S.S., Schmid T.M., Block J.A., Aydelotte M.B., et al. Phenotypic stability of bovine articular chondrocytes after long-term culture in alginate beads. J Cell Sci 1994, 107:17-27.
47. Hoemann C.D., Sun J., Legare A., McKee M.D., Buschmann M.D. Tissue engineering of cartilage using an injectable and adhesive chitosan-based cell-delivery vehicle. Osteoarthr Cartilage 2005, 13:318-329.
48. Hosseinkhani H., Hosseinkhani M., Tian F., Kobayashi H., Tabata Y. Osteogenic differentiation of mesenchymal stem cells in self-assembled peptide-amphiphile nanofibers. Biomaterials 2006, 27:4079-4086.
49. Iwashina T., Mochida J., Miyazaki T., Watanabe T., Iwabuchi S., Ando K., et al. Low-intensity pulsed ultrasound stimulates cell proliferation and proteoglycan production in rabbit intervertebral disc cells cultured in alginate. Biomaterials 2006, 27:354-361.
50. Kisiday J., Jin M., Kurz B., Hung H., Semino C., Zhang S., et al. Self-assembling peptide hydrogel fosters chondrocyte extracellular matrix production and cell division: implications for cartilage tissue repair. P Natl Acad Sci USA 2002, 99:9996-10001.
51. Klein T.J., Rizzi S.C., Reichert J.C., Georgi N., Malda J., Schuurman W., et al. Strategies for zonal cartilage repair using hydrogels. Macromol Biosci 2009, 9:1049-1058.
52. Passaretti D., Silverman R.P., Huang W., Kirchhoff C.H., Ashiku S., Randolph M.A., et al. Cultured chondrocytes produce injectable tissue-engineered cartilage in hydrogel polymer. Tissue Eng 2001, 7:805-815.
53. Peretti G.M., Xu J.W., Bonassar L.J., Kirchhoff C.H., Yaremchuk M.J., Randolph M.A. Review of injectable cartilage engineering using fibrin gel in mice and swine models. Tissue Eng 2006, 12:1151-1168.
54. Roughley P., Hoemann C., DesRosiers E., Mwale F., Antoniou J., Alini M. The potential of chitosan-based gels containing intervertebral disc cells for nucleus pulposus supplementation. Biomaterials 2006, 27:388-396.
55. Stern S., Lindenhayn K., Schultz O., Perka C. Cultivation of porcine cells from the nucleus pulposus in a fibrin/hyaluronic acid matrix. Acta Orthop Scand 2000, 71:496-502.
56. Trivedi N., Keegan M., Steil G.M., Hollister-Lock J., Hasenkamp W.M., Colton C.K., et al. Islets in alginate macrobeads reverse diabetes despite minimal acute insulin secretory responses. Transplantation 2001, 71:203-211.
57. Wong M., Siegrist M., Gaschen V., Park Y., Graber W., Studer D. Collagen fibrillogenesis by chondrocytes in alginate. Tissue Eng 2002, 8:979-987.
58. Bettinger C.J., Weinberg E.J., Kulig K.M., Vacanti J.P., Wang Y.D., Borenstein J.T., et al. Three-dimensional microfluidic tissue-engineering scaffolds using a flexible biodegradable polymer. Adv Mater 2006, 18:165-169.
59. Anseth K.S., Metters A.T., Bryant S.J., Martens P.J., Elisseeff J.H., Bowman C.N. In situ forming degradable networks and their application in tissue engineering and drug delivery. J Control Release 2002, 78:199-209.
60. Bryant S.J., Cuy J.L., Hauch K.D., Ratner B.D. Photo-patterning of porous hydrogels for tissue engineering. Biomaterials 2007, 28:2978-2986.
61. Causa F., Netti P.A., Ambrosio L. A multi-functional scaffold for tissue regeneration: the need to engineer a tissue analogue. Biomaterials 2007, 28:5093-5099.
62. Chang C.H., Liu H.C., Lin C.C., Chou C.H., Lin F.H. Gelatin-chondroitin-hyaluronan tri-copolymer scaffold for cartilage tissue engineering. Biomaterials 2003, 24:4853-4858.
63. Dang J.M., Sun D.D.N., Shin-Ya Y., Sieber A.N., Kostuik J.P., Leong K.W. Temperature-responsive hydroxybutyl chitosan for the culture of mesenchymal stem cells and intervertebral disk cells. Biomaterials 2006, 27:406-418.
64. Lawson M.A., Barralet J.E., Wang L., Shelton R.M., Triffitt J.T. Adhesion and growth of bone marrow stromal cells on modified alginate hydrogels. Tissue Eng 2004, 10:1480-1491.
65. Lee J., Cuddihy M.J., Kotov N.A. Three-dimensional cell culture matrices: state of the art. Tissue Eng Pt B-Rev 2008, 14:61-86.
66. Lee K.Y., Mooney D.J. Hydrogels for tissue engineering. Chem Rev 2001, 101:1869-1879.
67. Lutolf M.R., Weber F.E., Schmoekel H.G., Schense J.C., Kohler T., Muller R., et al. Repair of bone defects using synthetic mimetics of collagenous extracellular matrices. Nat Biotechnol 2003, 21:513-518.
68. Molinaro G., Leroux J.C., Damas J., Adam A. Biocompatibility of thermosensitive chitosan-based hydrogels: an in vivo experimental approach to injectable biomaterials. Biomaterials 2002, 23:2717-2722.
69. Nuttelman C.R., Henry S.M., Anseth K.S. Synthesis and characterization of photocrosslinkable, degradable poly(vinyl alcohol)-based tissue engineering scaffolds. Biomaterials 2002, 23:3617-3626.
70. Ponticiello M.S., Schinagl R.M., Kadiyala S., Barry F.P. Gelatin-based resorbable sponge as a carrier matrix for human mesenchymal stem cells in cartilage regeneration therapy. J Biomed Mater Res 2000, 52:246-255.
71. Schuster M., Turecek C., Weigel G., Saf R., Stampfl J., Varga F., et al. Gelatin-based photopolymers for bone replacement materials. J Polym Sci Part a-Polymer Chem 2009, 47:7078-7089.
72. Solchaga L.A., Gao J.Z., Dennis J.E., Awadallah A., Lundberg M., Caplan A.I., et al. Treatment of osteochondral defects with autologous bone marrow in a hyaluronan-based delivery vehicle. Tissue Eng 2002, 8:333-347.
73. Thebaud N.B., Pierron D., Bareille R., Le Visage C., Letourneur D., Bordenave L. Human endothelial progenitor cell attachment to polysaccharide-based hydrogels: a pre-requisite for vascular tissue engineering. J Mater Science-Materials Med 2007, 18:339-345.
74. Tsang V.L., Bhatia S.N. Three-dimensional tissue fabrication. Adv Drug Del Rev 2004, 56:1635-1647.
75. Wang L., Shelton R.M., Cooper P.R., Lawson M., Triffitt J.T., Barralet J.E. Evaluation of sodium alginate for bone marrow cell tissue engineering. Biomaterials 2003, 24:3475-3481.
76. Weinand C., Pomerantseva I., Neville C.M., Gupta R., Weinberg E., Madisch I., et al. Hydrogel-beta-tcp scaffolds and stem cells for tissue engineering bone. Bone 2006, 38:555-563.
77. Ahmed T.A.E., Dare E.V., Hincke M. Fibrin: a versatile scaffold for tissue engineering applications. Tissue Eng Pt B-Rev 2008, 14:199-215.
78. Almany L., Seliktar D. Biosynthetic hydrogel scaffolds made from fibrinogen and polyethylene glycol for 3d cell cultures. Biomaterials 2005, 26:2467-2477.
79. Chung H.J., Park T.G. Self-assembled and nanostructured hydrogels for drug delivery and tissue engineering. Nano Today 2009, 4:429-437.
80. Di Martino A., Sittinger M., Risbud M.V. Chitosan: a versatile biopolymer for orthopaedic tissue-engineering. Biomaterials 2005, 26:5983-5990.
81. Farrell E., O'Brien F.J., Doyle P., Fischer J., Yannas I., Harley B.A., et al. A collagen-glycosaminoglycan scaffold supports adult rat mesenchymal stem cell differentiation along osteogenic and chondrogenic routes. Tissue Eng 2006, 12:459-468.
82. Tibbitt M.W., Anseth K.S. Hydrogels as extracellular matrix mimics for 3d cell culture. Biotechnol Bioeng 2009, 103:655-663.
83. Wang X.H., Yan Y.N., Zhang R.J. Recent trends and challenges in complex organ manufacturing. Tissue Eng Pt B-Rev 2010, 16:189-197.
84. Shin H., Temenoff J.S., Bowden G.C., Zygourakis K., Farach-Carson M.C., Yaszemski M.J., et al. Osteogenic differentiation of rat bone marrow stromal cells cultured on arg-gly-asp modified hydrogels without dexamethasone and beta-glycerol phosphate. Biomaterials 2005, 26:3645-3654.
85. Moller S., Weisser J., Bischoff S., Schnabelrauch M. Dextran and hyaluronan methacrylate based hydrogels as matrices for soft tissue reconstruction. Biomol Eng 2007, 24:496-504.
86. Shin H., Ruhe P.Q., Mikos A.G., Jansen J.A. In vivo bone and soft tissue response to injectable, biodegradable oligo(poly(ethylene glycol) fumarate) hydrogels. Biomaterials 2003, 24:3201-3211.
87. Wang T.W., Spector M. Development of hyaluronic acid-based scaffolds for brain tissue engineering. Acta Biomater 2009, 5:2371-2384.
88. Seo S.J., Kim I.Y., Choi Y.J., Akaike T., Cho C.S. Enhanced liver functions of hepatocytes cocultured with nih 3t3 in the alginate/galactosylated chitosan scaffold. Biomaterials 2006, 27:1487-1495.
89. Mann B.K., Gobin A.S., Tsai A.T., Schmedlen R.H., West J.L. Smooth muscle cell growth in photopolymerized hydrogels with cell adhesive and proteolytically degradable domains: synthetic ecm analogs for tissue engineering. Biomaterials 2001, 22:3045-3051.
90. Erickson G.R., Gimble J.M., Franklin D.M., Rice H.E., Awad H., Guilak F. Chondrogenic potential of adipose tissue-derived stromal cells in vitro and in vivo. Biochem Bioph Res Co 2002, 290:763-769.
91. Cortiella J., Nichols J.E., Kojima K., Bonassar L.J., Dargon P., Roy A.K., et al. Tissue-engineered lung: an in vivo and in vitro comparison of polyglycolic acid and pluronic f-127 hydrogel/somatic lung progenitor cell constructs to support tissue growth. Tissue Eng 2006, 12:1213-1225.
92. LaNasa S.M., Bryant S.J. Influence of ecm proteins and their analogs on cells cultured on 2-d hydrogels for cardiac muscle tissue engineering. Acta Biomater 2009, 5:2929-2938.
93. Van Vlierberghe S., Dubruel P., Lippens E., Masschaele B., Van Hoorebeke L., Cornelissen M., et al. Toward modulating the architecture of hydrogel scaffolds: curtains versus channels. J Mater Sci-Mater M 2008, 19:1459-1466.
94. Fan J.Y., Shang Y., Yuan Y.J., Yang J. Preparation and characterization of chitosan/galactosylated hyaluronic acid scaffolds for primary hepatocytes culture. J Mater Sci-Mater M 2010, 21:319-327.
95. Landers R., Pfister A., Hubner U., John H., Schmelzeisen R., Mulhaupt R. Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques. J Mater Sci 2002, 37:3107-3116.
96. Madaghiele M., Piccinno A., Saponaro M., Maffezzoli A., Sannino A. Collagen- and gelatine-based films sealing vascular prostheses: evaluation of the degree of crosslinking for optimal blood impermeability. J Mater Sci-Mater M 2009, 20:1979-1989.
97. Noth U., Schupp K., Heymer A., Kall S., Jakob F., Schutze N., et al. Anterior cruciate ligament constructs fabricated from human mesenchymal stem cells in a collagen type i hydrogel. Cytotherapy 2005, 7:447-455.
98. Schmeichel K.L., Bissell M.J. Modeling tissue-specific signaling and organ function in three dimensions. J Cell Sci 2003, 116:2377-2388.
99. Dutta R.C., Dutta A.K. Cell-interactive 3d-scaffold; advances and applications. Biotechnol Adv 2009, 27:334-339.
100. Kirkpatrick C.J., Fuchs S., Hermanns M.I., Peters K., Unger R.E. Cell culture models of higher complexity in tissue engineering and regenerative medicine. Biomaterials 2007, 28:5193-5198.
101. Hutmacher D.W., Cool S. Concepts of scaffold-based tissue engineering-the rationale to use solid free-form fabrication techniques. J Cell Mol Med 2007, 11:654-669.
102. Mironov V., Boland T., Trusk T., Forgacs G., Markwald R.R. Organ printing: computer-aided jet-based 3d tissue engineering. Trends Biotechnol 2003, 21:157-161.
103. Roach P., Eglin D., Rohde K., Perry C.C. Modern biomaterials: a review-bulk properties and implications of surface modifications. J Mater Sci-Mater M 2007, 18:1263-1277.
104. Anderson J.M., Rodriguez A., Chang D.T. Foreign body reaction to biomaterials. Semin Immunol 2008, 20:86-100.
105. Azuma K., Nagaoka M., Cho C.S., Akaike T. An artificial extracellular matrix created by hepatocyte growth factor fused to igg-fc. Biomaterials 2010, 31:802-809.
106. Hubbell J.A. Bioactive biomaterials. Curr Opin Biotech 1999, 10:123-129.
107. Kikkawa Y., Takahashi N., Matsuda Y., Miwa T., Akizuki T., Kataoka A., et al. The influence of synthetic peptides derived from the laminin a1 chain on hepatocyte adhesion and gene expression. Biomaterials 2009, 30:6888-6895.
108. Woo J.H., Kim D.Y., Jo S.Y., Kang H., Noh I. Modification of the bulk properties of the porous poly(lactide-co-glycolide) scaffold by irradiation with a cyclotron ion beam with high energy for its application in tissue engineering. Biomed Mater 2009, 4:044101.
109. Zhu Y.B., Gao C.Y., Liu X.Y., Shen J.C. Surface modification of polycaprolactone membrane via aminolysis and biomacromolecule immobilization for promoting cytocompatibility of human endothelial cells. Biomacromolecules 2002, 3:1312-1319.
110. Zhu Y.B., Gao C.Y., Shen J.C. Surface modification of polycaprolactone with poly(methacrylic acid) and gelatin covalent immobilization for promoting its cytocompatibility. Biomaterials 2002, 23:4889-4895.
111. Chu P.K., Chen J.Y., Wang L.P., Huang N. Plasma-surface modification of biomaterials. Mat Sci Eng R 2002, 36:143-206.
112. Desmet T., Morent R., De Geyter N., Leys C., Schacht E., Dubruel P. Nonthermal plasma technology as a versatile strategy for polymeric biomaterials surface modification: a review. Biomacromolecules 2009, 10:2351-2378.
113. Tsioptsias C., Tsivintzelis I., Papadopoulou L., Pallayiotou C. A novel method for producing tissue engineering scaffolds from chitin, chitin-hydroxyapatite, and cellulose. Mat Sci Eng C-Bio S 2009, 29:159-164.
114. Martin L., Alonso M., Girotti A., Arias F.J., Rodriguez-Cabello J.C. Synthesis and characterization of macroporous thermosensitive hydrogels from recombinant elastin-like polymers. Biomacromolecules 2009, 10:3015-3022.
115. Pathi S.P., Kowalczewski C., Tadipatri R., Fischbach C. A novel 3-d mineralized tumor model to study breast cancer bone metastasis. PloS One 2010, 5:e8849.
116. Zhu X.H., Arifin D.Y., Khoo B.H., Hua J.S., Wang C.H. Study of cell seeding on porous poly(d, l-lactic-co-glycolic acid) sponge and growth in a couette-taylor bioreactor. Chem Eng Sci 2010, 65:2108-2117.
117. Salerno A., Netti P.A., Di Maio E., Iannace S. Engineering of foamed structures for biomedical application. J Cell Plast 2009, 45:103-117.
118. Gomes M.E., Azevedo H.S., Moreira A.R., Ella V., Kellomaki M., Reis R.L. Starch-poly(epsilon-caprolactone) and starch-poly(lactic acid) fibre-mesh scaffolds for bone tissue engineering applications: structure, mechanical properties and degradation behaviour. J Tissue Eng Regen M 2008, 2:243-252.
119. Mooney D.T., Mazzoni C.L., Breuer C., McNamara K., Hern D., Vacanti J.P., et al. Stabilized polyglycolic acid fibre based tubes for tissue engineering. Biomaterials 1996, 17:115-124.
120. Liu X.H., Ma P.X. Phase separation, pore structure, and properties of nanofibrous gelatin scaffolds. Biomaterials 2009, 30:4094-4103.
121. Nichols M.D., Scott E.A., Elbert D.L. Factors affecting size and swelling of poly(ethylene glycol) microspheres formed in aqueous sodium sulfate solutions without surfactants. Biomaterials 2009, 30:5283-5291.
122. Lee S., Seong S.C., Lee J.H., Han I.K., Oh S.H., Cho K.J., et al. Porous polymer prosthesis for meniscal regeneration. Key Eng Mat 2007, 342-343:33-36.
123. Wang Y.Y., Liu L., Guo S.R. Characterization of biodegradable and cytocompatible nano-hydroxyapatite/polycaprolactone porous scaffolds in degradation in vitro. Polym Degrad Stabil 2010, 95:207-213.
124. Mu Y.H., Li Y.B., Wang M.B., Xu F.L., Zhang X., Tian Z.Y. Novel method to fabricate porous n-ha/pva hydrogel scaffolds. Mater Sci Forum 2006, 510-511:878-881.
125. Sinha A., Guha A. Biomimetic patterning of polymer hydrogels with hydroxyapatite nanoparticles. Mat Sci Eng C Bio S 2009, 29:1330-1333.
126. Mironov V., Kasyanov V., Shu X.Z., Eisenberg C., Eisenberg L., Gonda S., et al. Fabrication of tubular tissue constructs by centrifugal casting of cells suspended in an in situ crosslinkable hyaluronan-gelatin hydrogel. Biomaterials 2005, 26:7628-7635.
127. Pitarresi G., Palumbo F.S., Calabrese R., Craparo E.F., Giammona G. Crosslinked hyaluronan with a protein-like polymer: novel bioresorbable films for biomedical applications. J Biomed Mater Res A 2008, 84A:413-424.
128. Estelles J.M., Vidaurre A., Duenas J.M.M., Cortazar I.C. Physical characterization of polycaprolactone scaffolds. J Mater Sci Mater M 2008, 19:189-195.
129. Yang S.F., Leong K.F., Du Z.H., Chua C.K. The design of scaffolds for use in tissue engineering. Part I. Traditional factors. Tissue Eng 2001, 7:679-689.
130. Chua C.K., Leong K.F., Lim C.S. Rapid prototyping: principles and applications 2004, World Scientific Publishing, Singapore.
131. Yang S.F., Leong K.F., Du Z.H., Chua C.K. The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques. Tissue Eng 2002, 8:1-11.
132. Melchels F.P.W., Feijen J., Grijpma D.W. A review on stereolithography and its applications in biomedical engineering. Biomaterials 2010, 31:6121-6130.
133. Arcaute K., Mann B.K., Wicker R.B. Stereolithography of three-dimensional bioactive poly(ethylene glycol) constructs with encapsulated cells. Ann Biomed Eng 2006, 34:1429-1441.
134. Liska R., Schuster M., Infuhr R., Tureeek C., Fritscher C., Seidl B., et al. Photopolymers for rapid prototyping. J Coat Technol Res 2007, 4:505-510.
135. Lee S.J., Rhie J.W., Cho D.W. Development of three-dimensional alginate encapsulated chondrocyte hybrid scaffold using microstereolithography. J Manuf Sci E-T ASME 2008, 130:021007.
136. Lee S.J., Kang T., Rhie J.W., Cho D.W. Development of three-dimensional hybrid scaffold using chondrocyte-encapsulated alginate hydrogel. Sensor Mater 2007, 19:445-451.
137. Lee S.J., Kang H.W., Park J.K., Rhie J.W., Hahn S.K., Cho D.W. Application of microstereolithography in the development of three-dimensional cartilage regeneration scaffolds. Biomed Microdevices 2008, 10:233-241.
138. Dhariwala B., Hunt E., Boland T. Rapid prototyping of tissue-engineering constructs, using photopolymerizable hydrogels and stereolithography. Tissue Eng 2004, 10:1316-1322.
139. Hutmacher D.W., Sittinger M., Risbud M.V. Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems. Trends Biotechnol 2004, 22:354-362.
140. Lu Y., Mapili G., Suhali G., Chen S.C., Roy K. A digital micro-mirror device-based system for the microfabrication of complex, spatially patterned tissue engineering scaffolds. J Biomed Mater Res A 2006, 77A:396-405.
141. Choi J.W., Wicker R., Lee S.H., Choi K.H., Ha C.S., Chung I. Fabrication of 3d biocompatible/biodegradable micro-scaffolds using dynamic mask projection microstereolithography. J Mater Process Tech 2009, 209:5494-5503.
142. Han L.H., Mapili G., Chen S., Roy K. Projection microfabrication of three-dimensional scaffolds for tissue engineering. J Manuf Sci E-T ASME 2008, 130:021005.
143. Itoga K., Yamato M., Kobayashi J., Kikuchi A., Okano T. Cell micropatterning using photopolymerization with a liquid crystal device commercial projector. Biomaterials 2004, 25:2047-2053.
144. Sun C., Fang N., Wu D.M., Zhang X. Projection micro-stereolithography using digital micro-mirror dynamic mask. Sensor Actuat A Phys 2005, 121:113-120.
145. Gu P., Zhang X., Zeng Y., Ferguson B. Quality analysis and optimization of solid ground curing process. J Manuf Syst 2001, 20:250-263.
146. Zhang X., Zhou B., Zeng Y., Gu P. Model layout optimization for solid ground curing rapid prototyping processes. Robot CIM Int Manuf 2002, 18:41-51.
147. Xing J.F., Dong X.Z., Chen W.Q., Duan X.M., Takeyasu N., Tanaka T., et al. Improving spatial resolution of two-photon microfabrication by using photoinitiator with high initiating efficiency. Appl Phys Lett 2007, 90:131106.
148. Yu T., Chiellini F., Schmaljohan D., Solaro R., Ober C. Microfabrication of hydrogels for biomedical applications. Advances in resist technology and processing 2002, 854-860. Bellingham, Washington. T.H. Fedynyshyn (Ed.).
149. Mapili G., Lu Y., Chen S.C., Roy K. Laser-layered microfabrication of spatially patterned functionalized tissue-engineering scaffolds. J Biomed Mater Res B 2005, 75B:414-424.
150. Arcaute K., Mann B., Wicker R. Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds. Acta Biomater 2010, 6:1047-1054.
151. Arcaute K., Ochoa L., Mann B.K., Wicker R.B. Stereolithography of PEG hydrogel multi-lumen nerve regeneration conduits. Manuf Eng Div Asme 2005, 161-167. ASME.
152. Arcaute K, Ochoa L, Medina F, Elkins C, Mann B, Wicker R. Three-dimensional PEG hydrogel construct fabrication using stereolithography. Mater Res Soc Symp p. 191-197.
153. Yasar O., Lan S., Starly B. A lindenmayer system-based approach for the design of nutrient delivery networks in tissue constructs. Biofabrication 2009, 1:045004.
154. Koh W.G., Revzin A., Pishko M.V. Poly(ethylene glycol) hydrogel microstructures encapsulating living cells. Langmuir 2002, 18:2459-2462.
155. Khademhosseini A., Eng G., Yeh J., Fukuda J., Blumling J., Langer R., et al. Micromolding of photocrosslinkable hyaluronic acid for cell encapsulation and entrapment. J Biomed Mater Res A 2006, 79A:522-532.
156. Luo Y., Shoichet M.S. A photolabile hydrogel for guided three-dimensional cell growth and migration. Nat Mat 2004, 3:249-253.
157. Khademhosseini A., Langer R. Microengineered hydrogels for tissue engineering. Biomaterials 2007, 28:5087-5092.
158. Barry R.A., Shepherd R.F., Hanson J.N., Nuzzo R.G., Wiltzius P., Lewis J.A. Direct-write assembly of 3D hydrogel scaffolds for guided cell growth. Adv Mater 2009, 21:2407-2410.
159. Yuan D., Lasagni As, Shao P., Das S. Rapid prototyping of microstructured hydrogels via laser direct-write and laser interference photopolymerisation. Virtual Phys Prototyping 2008, 3:221-229.
160. Schade R., Weiss T., Berg A., Schnabelrauch M., Liefeith K. Two-photon techniques in tissue engineering. Int J Artif Organs 2010, 33:219-227.
161. Ovsianikov A., Gruene M., Pflaum M., Koch L., Maiorana F., Wilhelmi M., et al. Laser printing of cells into 3D scaffolds. Biofabrication 2010, 2:014104.
162. Van den Bulcke A., Bogdanov B., De Rooze N., Schacht E., Cornelissen M., Berghmans H. Structural and rheological properties of methacrylamide modified gelatin hydrogels. Biomacromolecules 2000, 1:31-38.
163. Ovsianikov A., Deiwick A., Van Vlierberghe S., Pflaum M., Wilhelmi M., Dubruel P., et al. Laser fabrication of 3D gelatin scaffolds for the generation of bioartificial tissues. Materials 2011, 4:288-299.
164. Ovsianikov A., Deiwick A., Van Vlierberghe S., Dubruel P., Moller L., Drager G., et al. Laser fabrication of three-dimensional CAD scaffolds from photosensitive gelatin for applications in tissue engineering. Biomacromolecules 2011, 12:851-858.
165. Engelhardt S., Hoch E., Borchers K., Meyer W., Kruger H., Tovar G.E.M., et al. Fabrication of 2D protein microstructures and 3D polymer-protein hybrid microstructures by two-photon polymerization. Biofabrication 2011, 3:025003.
166. Khalil S., Nam J., Sun W. Multi-nozzle deposition for construction of 3D biopolymer tissue scaffolds. Rapid Prototyping J 2005, 11:9-17.
167. Liu L., Xiong Z., Yan Y.N., Zhang R.J., Wang X.H., Jin L. Multinozzle low-temperature deposition system for construction of gradient tissue engineering scaffolds. J Biomed Mater Res B 2009, 88B:254-263.
168. Vozzi G., Ahluwalia A. Microfabrication for tissue engineering: rethinking the cells-on-a scaffold approach. J Mater Chem 2007, 17:1248-1254.
169. Mariani M., Rosatini F., Vozzi G., Previti A., Ahluwalia A. Characterization of tissue-engineered scaffolds microfabricated with pam. Tissue Eng 2006, 12:547-557.
170. Vozzi G., Previti A., De Rossi D., Ahluwalia A. Microsyringe-based deposition of two-dimensional and three-dimensional polymer scaffolds with a well-defined geometry for application to tissue engineering. Tissue Eng 2002, 8:1089-1098.
171. Vozzi G., Previti A., Ciaravella G., Ahluwalia A. Microfabricated fractal branching networks. J Biomed Mater Res A 2004, 71A:326-333.
172. Tirella A., Vozzi G., Ahluwalia A. Biomimicry of pam microfabricated hydrogel scaffold. Tech Program Proc 2008, 496-500. Nip24/Digital fabrication 2008: 24th international conference on digital printing technologies.
173. Tirella A., Orsini A., Vozzi G., Ahluwalia A. A phase diagram for microfabrication of geometrically controlled hydrogel scaffolds. Biofabrication 2009, 1:045002.
174. Xiong Z., Yan Y.N., Wang S.G., Zhang R.J., Zhang C. Fabrication of porous scaffolds for bone tissue engineering via low-temperature deposition. Scripta Mater 2002, 46:771-776.
175. Xu W., Wang X.H., Yan Y.N., Zhang R.J. Rapid protoyping of polyurethane for the creation of vascular systems. J Bioact Compat Pol 2008, 23:103-115.
176. Liu L., Xiong Z., Zhang R.J., Jin L., Yan Y.N. A novel osteochondral scaffold fabricated via multi-nozzle low-temperature deposition manufacturing. J Bioact Compat Pol 2009, 24:18-30.
177. Khalil S., Nam J., Sun W. Biopolymer deposition for freeform fabrication of tissue engineered scaffolds. Proc IEEE 30th Annu Northeast Bioeng Conf 2004, 136-137.
178. Zhuo X., Yongnian Y., Shenguo W., Renji Z., Chao Z. Fabrication of porous scaffolds for bone tissue engineering via low-temperature deposition. Scripta Mater 2002, 46:771-776.
179. Landers R., Mulhaupt R. Desktop manufacturing of complex objects, prototypes and biomedical scaffolds by means of computer-assisted design combined with computer-guided 3D plotting of polymers and reactive oligomers. Macromol Mater Eng 2000, 282:17-21.
180. Kim G.H., Son J.G. 3D polycarprolactone (pcl) scaffold with hierarchical structure fabricated by a piezoelectric transducer (pzt)-assisted bioplotter. Appl Phys A Mater 2009, 94:781-785.
181. Ang T.H., Sultana F.S.A., Hutmacher D.W., Wong Y.S., Fuh J.Y.H., Mo X.M., et al. Fabrication of 3D chitosan-hydroxyapatite scaffolds using a robotic dispensing system. Mat Sci Eng C Bio S 2002, 20:35-42.
182. Cesarano J. A review of robocasting technology. Mater Res Soc Symp P 1999, 542:133-139.
183. Franco J., Hunger P., Launey M.E., Tomsia A.P., Saiz E. Direct write assembly of calcium phosphate scaffolds using a water-based hydrogel. Acta Biomater 2010, 6:218-228.
184. Munch E., Franco J., Deville S., Hunger P., Saiz E., Tomsia A.P. Porous ceramic scaffolds with complex architectures. Jom-US 2008, 60:54-58.
185. Smay J.E., Gratson G.M., Shepherd R.F., Cesarano J., Lewis J.A. Directed colloidal assembly of 3D periodic structures. Adv Mater 2002, 14:1279-1283.
186. Gratson G.M., Xu M.J., Lewis J.A. Microperiodic structures-direct writing of three-dimensional webs. Nature 2004, 428:386.
187. Duoss E.B., Twardowski M., Lewis J.A. Sol-gel inks for direct-write assembly of functional oxides. Adv Mater 2007, 19:3485-3489.
188. van Osch T.H.J., Perelaer J., de Laat A.W.M., Schubert U.S. Inkjet printing of narrow conductive tracks on untreated polymeric substrates. Adv Mater 2008, 20:343-345.
189. Guo J.J., Lewis J.A. Aggregation effects on the compressive flow properties and drying behavior of colloidal silica suspensions. J Am Ceram Soc 1999, 82:2345-2358.
190. Iwami K., Noda T., Ishida K., Morishima K., Nakamura M., Umeda N. Bio rapid prototyping by extruding/aspirating/refilling thermoreversible hydrogel. Biofabrication 2010, 2:014108.
191. Li S.J., Xiong Z., Wang X.H., Yan Y.N., Liu H.X., Zhang R.J. Direct fabrication of a hybrid cell/hydrogel construct by a double-nozzle assembling technology. J Bioact Compat Pol 2009, 24:249-265.
192. Li S.J., Yan Y.N., Xiong Z., Weng C.Y., Zhang R.J., Wang X.H. Gradient hydrogel construct based on an improved cell assembling system. J Bioact Compat Pol 2009, 24:84-99.
193. Smith C.M., Stone A.L., Parkhill R.L., Stewart R.L., Simpkins M.W., Kachurin A.M., et al. Three-dimensional bioassembly tool for generating viable tissue-engineered constructs. Tissue Eng 2004, 10:1566-1576.
194. Lee W., Debasitis J.C., Lee V.K., Lee J.H., Fischer K., Edminster K., et al. Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication. Biomaterials 2009, 30:1587-1595.
195. Cheng J., Lin F., Liu H.X., Yan Y.N., Wang X.H., Zhang R., et al. Rheological properties of cell-hydrogel composites extruding through small-diameter tips. J Manuf Sci E T ASME 2008, 130:021014.
196. Xu M., Wang X., Yan Y., Yao R., Ge Y. An cell-assembly derived physiological 3D model of the metabolic syndrome, based on adipose-derived stromal cells and a gelatin/alginate/fibrinogen matrix. Biomaterials 2010, 31:3868-3877.
197. Skardal A., Zhang J., McCoard L., Xu X., Oottamasathien S., Prestwich G.D. Photocrosslinkable hyaluronan-gelatin hydrogels for two-step bioprinting. Tissue Eng Part A 2010, 16:2675-2685.
198. Chang R., Sun W. Effects of dispensing pressure and nozzle diameter on cell survival from solid freeform fabrication-based direct cell writing. Tissue Eng Part A 2008, 14:41-48.
199. Wong J.Y., Velasco A., Rajagopalan P., Pham Q. Directed movement of vascular smooth muscle cells on gradient-compliant hydrogels. Langmuir 2003, 19:1908-1913.
200. Vozzi G., Flaim C., Ahluwalia A., Bhatia S. Fabrication of plga scaffolds using soft lithography and microsyringe deposition. Biomaterials 2003, 24:2533-2540.
201. Cohen D.L., Lipton J.I., Bonassar L.J., Lipson H. Additive manufacturing for in situ repair of osteochondral defects. Biofabrication 2010, 2:035004.
202. Lixandrao A.L., Noritomi P.Y., da Silva J.V.L., Neto P.I., Cheung P.Y.C., Colangelo N., et al. Construction and adaptation of an open source rapid prototyping machine for biomedical research purposes-a multinational collaborative development. Innovative Dev Des Manufacturing 2010, 469-473.
203. Zhang T., Yan Y.N., Wang X.H., Xiong Z., Lin F., Wu R.D., et al. Three-dimensional gelatin and gelatin/hyaluronan hydrogel structures for traumatic brain injury. J Bioact Compat Pol 2007, 22:19-29.
204. Xu W., Wang X.H., Yan Y.N., Zheng W., Xiong Z., Lin F., et al. Rapid prototyping three-dimensional cell/gelatin/fibrinogen constructs for medical regeneration. J Bioact Compat Pol 2007, 22:363-377.
205. Yan Y.N., Wang X.H., Xiong Z., Liu H.X., Liu F., Lin F., et al. Direct construction of a three-dimensional structure with cells and hydrogel. J Bioact Compat Pol 2005, 20:259-269.
206. Yan Y.N., Wang X.H., Pan Y.Q., Liu H.X., Cheng J., Xiong Z., et al. Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique. Biomaterials 2005, 26:5864-5871.
207. Rucker M., Laschke M.W., Junker D., Carvalho C., Schramm A., Mulhaupt R., et al. Angiogenic and inflammatory response to biodegradable scaffolds in dorsal skinfold chambers of mice. Biomaterials 2006, 27:5027-5038.
208. Wang X.H., Yan Y.N., Pan Y.Q., Xiong Z., Liu H.X., Cheng B., et al. Generation of three-dimensional hepatocyte/gelatin structures with rapid prototyping system. Tissue Eng 2006, 12:83-90.
209. Schuurman W., Khristov V., Pot M.W., van Weeren P.R., Dhert W.J.A., Malda J. Bioprinting of hybrid tissue constructs with tailorable mechanical properties. Biofabrication 2011, 3:021001.
210. Shim J.H., Kim J.Y., Park M., Park J., Cho D.W. Development of a hybrid scaffold with synthetic biomaterials and hydrogel using solid freeform fabrication technology. Biofabrication 2011, 3:034102.
211. Landers R., Hubner U., Schmelzeisen R., Mulhaupt R. Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering. Biomaterials 2002, 23:4437-4447.
212. Maher P.S., Keatch R.P., Donnelly K., Mackay R.E., Paxton J.Z. Construction of 3D biological matrices using rapid prototyping technology. Rapid Prototyping J 2009, 15:204-210.
213. Fedorovich N.E., Swennen I., Girones J., Moroni L., van Blitterswijk C.A., Schacht E., et al. Evaluation of photocrosslinked lutrol hydrogel for tissue printing applications. Biomacromolecules 2009, 10:1689-1696.
214. Snyder J.E., Hamid Q., Wang C., Chang R., Emami K., Wu H., et al. Bioprinting cell-laden matrigel for radioprotection study of liver by pro-drug conversion in a dual-tissue microfluidic chip. Biofabrication 2011, 3:034112.
215. Xu Wei, Yan Yongnian, Zhang Renji Rapid protyping of polyurethane for the creation of vascular systems. J Bioact Compat Pol 2008, 23:103-114.
216. Xie B.J., Parkhill R.L., Warren W.L., Smay J.E. Direct writing of three-dimensional polymer scaffolds using colloidal gels. Adv Funct Mater 2006, 16:1685-1693.
217. Tartarisco G., Gallone G., Carpi F., Vozzi G. Polyurethane unimorph bender microfabricated with pressure assisted microsyringe (pam) for biomedical applications. Mat Sci Eng C Bio S 2009, 29:1835-1841.
218. Sachs E., Cima M., Cornie J. Three-dimensional printing: rapid tooling and prototypes directly from a cad model. CIRP Ann Manufacturing Technol 1990, 39:201-204.
219. Nakamura M., Kobayashi A., Takagi F., Watanabe A., Hiruma Y., Ohuchi K., et al. Biocompatible inkjet printing technique for designed seeding of individual living cells. Tissue Eng 2005, 11:1658-1666.
220. Cima M., Sachs E., Fan T.L., Bredt J.F., Michaels S.P., Khanuja S., et al. Three-dimensional printing techniques 1993, US Patent No 5204055.
221. Pfister A., Landers R., Laib A., Hubner U., Schmelzeisen R., Mulhaupt R. Biofunctional rapid prototyping for tissue-engineering applications: 3D bioplotting versus 3D printing. J Polym Sci A 2004, 42:624-638.
222. Lam C.X.F., Mo X.M., Teoh S.H., Hutmacher D.W. Scaffold development using 3D printing with a starch-based polymer. Mat Sci Eng C Bio S 2002, 20:49-56.
223. Utela B.R., Storti D., Anderson R.L., Ganter M. A review of process development steps for new material systems in three dimensional printing (3DP). J Manufacturing Process 2008, 10:96-104.
224. Boland T., Tao X., Damon B.J., Manley B., Kesari P., Jalota S., et al. Drop-on-demand printing of cells and materials for designer tissue constructs. Mat Sci Eng C Bio S 2007, 27:372-376.
225. Sun J., Ng J.H., Fuh Y.H., Wong Y.S., Loh H.T., Xu Q. Comparison of micro-dispensing performance between micro-valve and piezoelectric printhead. Microsyst Technol 2009, 15:1437-1448.
226. Wu B.M., Borland S.W., Giordano R.A., Cima L.G., Sachs E.M., Cima M.J. Solid free-form fabrication of drug delivery devices. J Control Release 1996, 40:77-87.
227. Sanjana N.E., Fuller S.B. A fast flexible ink-jet printing method for patterning dissociated neurons in culture. J Neurosci Meth 2004, 136:151-163.
228. Xu T., Gregory C.A., Molnar P., Cui X., Jalota S., Bhaduri S.B., et al. Viability and electrophysiology of neural cell structures generated by the inkjet printing method. Biomaterials 2006, 27:3580-3588.
229. Koegler W.S., Griffith L.G. Osteoblast response to plga tissue engineering scaffolds with peo modified surface chemistries and demonstration of patterned cell response. Biomaterials 2004, 25:2819-2830.
230. Cui X.F., Boland T. Human microvasculature fabrication using thermal inkjet printing technology. Biomaterials 2009, 30:6221-6227.
231. Sachlos E., Reis N., Ainsley C., Derby B., Czernuszka J.T. Novel collagen scaffolds with predefined internal morphology made by solid freeform fabrication. Biomaterials 2003, 24:1487-1497.
232. Yeong W.Y., Chua C.K., Leong K.F., Chandrasekaran M., Lee M.W. Comparison of drying methods in the fabrication of collagen scaffold via indirect rapid prototyping. J Biomed Mater Res B 2007, 82B:260-266.
233. Sastry S.V., Nyshadham J.R., Fix J.A. Recent technological advances in oral drug delivery - a review. Pharm Sci Technol 2000, 3:138-145.
234. Leong K.F., Cheah C.M., Chua C.K. Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs. Biomaterials 2003, 24:2363-2378.
235. Suwanprateeb J. Improvement in mechanical properties of three-dimensional printing parts made from natural polymers reinforced by acrylate resin for biomedical applications: a double infiltration approach. Polym Int 2006, 55:57-62.
236. Boland T., Mironov V., Gutowska A., Roth E.A., Markwald R.R. Cell and organ printing 2: fusion of cell aggregates in three-dimensional gels. Anat Rec Part A 2003, 272A:497-502.
237. Smay J.E., Cesarano J., Lewis J.A. Colloidal inks for directed assembly of 3-d periodic structures. Langmuir 2002, 18:5429-5437.
238. Simon J.L., Michna S., Lewis J.A., Rekow E.D., Thompson V.P., Smay J.E., et al. In vivo bone response to 3d periodic hydroxyapatite scaffolds assembled by direct ink writing. J Biomed Mater Res A 2007, 83A:747-758.
239. Geng L., Feng W., Hutmacher D.W., Wong Y.S., Loh H.T., Fuh J.Y.H. Direct writing of chitosan scaffolds using a robotic system. Rapid Prototyping J 2005, 11:90-97.
240. Yan Y.N., Xiong Z., Hu Y.Y., Wang S.G., Zhang R.J., Zhang C. Layered manufacturing of tissue engineering scaffolds via multi-nozzle deposition. Mater Lett 2003, 57:2623-2628.
241. Therriault D., White S.R., Lewis J.A. Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly. Nat Mater 2003, 2:265-271.
242. Hollister S.J. Porous scaffold design for tissue engineering. Nat Mater 2005, 4:518-524.
243. Rumi M., Ehrlich J.E., Heikal A.A., Perry J.W., Barlow S., Hu Z.Y., et al. Structure-property relationships for two-photon absorbing chromophores: bis-donor diphenylpolyene and bis(styryl)benzene derivatives. J Am Chem Soc 2000, 122:9500-9510.
244. Kuebler S.M., Braun K.L., Zhou W.H., Cammack J.K., Yu T.Y., Ober C.K., et al. Design and application of high-sensitivity two-photon initiators for three-dimensional microfabrication. J Photoch Photobio A 2003, 158:163-170.
245. Cellesi F., Tirelli N., Hubbell J.A. Towards a fully-synthetic substitute of alginate: development of a new process using thermal gelation and chemical cross-linking. Biomaterials 2004, 25:5115-5124.
246. Niu G.G., Zhang H.B., Song L., Cui X.P., Cao H., Zheng Y.D., et al. Thiol/acrylate-modified peo-ppo-peo triblocks used as reactive and thermosensitive copolymers. Biomacromolecules 2008, 9:2621-2628.
247. Niu G.G., Du F.Y., Song L., Zhang H.B., Yang J., Cao H., et al. Synthesis and characterization of reactive poloxamer 407s for biomedical applications. J Control Release 2009, 138:49-56.
248. Shu X.Z., Liu Y.C., Palumbo F.S., Lu Y., Prestwich G.D. In situ crosslinkable hyaluronan hydrogels for tissue engineering. Biomaterials 2004, 25:1339-1348.
249. Du Y.J., Brash J.L. Synthesis and characterization of thiol-terminated poly(ethylene oxide) for chemisorption to gold surface. J Appl Polym Sci 2003, 90:594-607.
250. Brink K.S., Yang P.J., Temenoff J.S. Degradative properties and cytocompatibility of a mixed-mode hydrogel containing oligo poly(ethylene glycol) fumarate and poly(ethylene glycol)dithiol. Acta Biomater 2009, 5:570-579.
251. Aimetti A.A., Machen A.J., Anseth K.S. Poly(ethylene glycol) hydrogels formed by thiol-ene photopolymerization for enzyme-responsive protein delivery. Biomaterials 2009, 30:6048-6054.
252. Govender S., Swart R. Surfactant formulations for multi-functional surface modification. Colloid Surf A 2008, 331:97-102.
253. Lee T.Y., Bowman C.N. The effect of functionalized nanoparticles on thiol-ene polymerization kinetics. Polymer 2006, 47:6057-6065.
254. Rydholm A.E., Bowman C.N., Anseth K.S. Degradable thiol-acrylate photopolymers: polymerization and degradation behavior of an in situ forming biomaterial. Biomaterials 2005, 26:4495-4506.
255. Lutolf M.P., Raeber G.P., Zisch A.H., Tirelli N., Hubbell J.A. Cell-responsive synthetic hydrogels. Adv Mater 2003, 15:888-892.
256. Liang H.C., Chang W.H., Liang H.F., Lee M.H., Sung H.W. Crosslinking structures of gelatin hydrogels crosslinked with genipin or a water-soluble carbodiimide. J Appl Polym Sci 2004, 91:4017-4026.
257. Bryant S.J., Nuttelman C.R., Anseth K.S. Cytocompatibility of uv and visible light photoinitiating systems on cultured nih/3t3 fibroblasts in vitro. J Biomat Sci-Polym Sci 2000, 11:439-457.
258. Williams C.G., Malik A.N., Kim T.K., Manson P.N., Elisseeff J.H. Variable cytocompatibility of six cell lines with photoinitiators used for polymerizing hydrogels and cell encapsulation. Biomaterials 2005, 26:1211-1218.
259. Kizilel S., Sawardecker E., Teymour F., Perez-Luna V.H. Sequential formation of covalently bonded hydrogel multilayers through surface initiated photopolymerization. Biomaterials 2006, 27:1209-1215.
260. Desai P.N., Yuan Q., Yang H. Synthesis and characterization of photocurable polyamidoamine dendrimer hydrogels as a versatile platform for tissue engineering and drug delivery. Biomacromolecules 2010, 11:666-673.
261. Fedorovich N.E., Oudshoorn M.H., van Geemen D., Hennink W.E., Alblas J., Dhert W.J.A. The effect of photopolymerization on stem cells embedded in hydrogels. Biomaterials 2009, 30:344-353.
262. Duan S.F., Zhu W., Yu L., Ding J.D. Negative cooperative effect of cytotoxicity of a di-component initiating system for a novel injectable tissue engineering hydrogel. Chin Sci Bull 2005, 50:1093-1096.
263. Sarac A.S. Redox polymerization. Prog Polym Sci 1999, 24:1149-1204.
264. Jakab K., Norotte C., Marga F., Murphy K., Vunjak-Novakovic G., Forgacs G. Tissue engineering by self-assembly and bio-printing of living cells. Biofabrication 2010, 2:022001.
265. Langer R. Editorial: tissue engineering: perspectives, challenges, and future directions. Tissue Eng 2007, 13:1-2.
266. Mironov V., Visconti R.P., Kasyanov V., Forgacs G., Drake C.J., Markwald R.R. Organ printing: tissue spheroids as building blocks. Biomaterials 2009, 30:2164-2174.
267. Whitesides G.M., Boncheva M. Beyond molecules: self-assembly of mesoscopic and macroscopic components. P Natl Acad Sci USA 2002, 99:4769-4774.
268. Whitesides G.M., Grzybowski B. Self-assembly at all scales. Science 2002, 295:2418-2421.
269. L'heureux N., Paquet S., Labbe R., Germain L., Auger F.A. A completely biological tissue-engineered human blood vessel. FASEB J 1998, 12:47-56.
270. L'heureux N., Dusserre N., Konig G., Horgan M., Kyles A., Gregory C.R., et al. First use of a completely biological human tissue engineered blood vessel in a primate model. Circulation 2004, 110:508.
271. Hannachi I.E., Yamato M., Okano T. Cell sheet technology and cell patterning for biofabrication. Biofabrication 2009, 1:022002.
272. Haraguchi Y., Shimizu T., Yamato M., Kikuchi A., Okano T. Electrical coupling of cardiomyocyte sheets occurs rapidly via functional gap junction formation. Biomaterials 2006, 27:4765-4774.
273. Shimizu T., Sekine H., Isoi Y., Yamato M., Kikuchi A., Okano T. Long-term survival and growth of pulsatile myocardial tissue grafts engineered by the layering of cardiomyocyte sheets. Tissue Eng 2006, 12:499-507.
274. Nishida K., Yamato M., Hayashida Y., Watanabe K., Yamamoto K., Adachi E., et al. Corneal reconstruction with tissue-engineered cell sheets composed of autologous oral mucosal epithelium. New Engl J Med 2004, 351:1187-1196.
275. Barron J.A., Wu P., Ladouceur H.D., Ringeisen B.R. Biological laser printing: a novel technique for creating heterogeneous 3-dimensional cell patterns. Biomed Microdevices 2004, 6:139-147.
276. Guillemot F., Souquet A., Catros S., Guillotin B., Lopez J., Faucon M., et al. High-throughput laser printing of cells and biomaterials for tissue engineering. Acta Biomater 2010, 6:2494-2500.
277. Guillotin B., Souquet A., Catros S., Duocastella M., Pippenger B., Bellance S., et al. Laser assisted bioprinting of engineered tissue with high cell density and microscale organization. Biomaterials 2010, 31:7250-7256.
278. Wang W., Huang Y., Grujicic M., Chrisey D.B. Study of impact-induced mechanical effects in cell direct writing using smooth particle hydrodynamic method. J Manuf Sci E T ASME 2008, 130:021012.
279. Boland T., Xu T., Damon B., Cui X. Application of inkjet printing to tissue engineering. Biotechnol J 2006, 1:910-917.
280. Wilson W.C., Boland T. Cell and organ printing 1: protein and cell printers. Anat Rec Part A 2003, 272A:491-496.
281. Campbell P.G., Weiss L.E. Tissue engineering with the aid of inkjet printers. Expert Opin Biol Th 2007, 7:1123-1127.
282. Xu T., Jin J., Gregory C., Hickman J.J., Boland T. Inkjet printing of viable mammalian cells. Biomaterials 2005, 26:93-99.
283. Yamazoe H., Tanabe T. Cell micropatterning on an albumin-based substrate using an inkjet printing technique. J Biomed Mater Res A 2009, 91A:1202-1209.
284. Calvert P. Printing cells. Science 2007, 318:208-209.
285. Norotte C., Marga F.S., Niklason L.E., Forgacs G. Scaffold-free vascular tissue engineering using bioprinting. Biomaterials 2009, 30:5910-5917.
286. Skardal A., Zhang J.X., Prestwich G.D. Bioprinting vessel-like constructs using hyaluronan hydrogels crosslinked with tetrahedral polyethylene glycol tetracrylates. Biomaterials 2010, 31:6173-6181.
287. Lee Y.B., Polio S., Lee W., Dai G.H., Menon L., Carroll R.S., et al. Bio-printing of collagen and vegf-releasing fibrin gel scaffolds for neural stem cell culture. Exp Neurol 2010, 223:645-652.
288. Moon S., Hasan S.K., Song Y.S., Xu F., Keles H.O., Manzur F., et al. Layer by layer three-dimensional tissue epitaxy by cell-laden hydrogel droplets. Tissue Eng Pt C Meth 2010, 16:157-166.
289. Jakab K., Norotte C., Damon B., Marga F., Neagu A., Besch-Williford C.L., et al. Tissue engineering by self-assembly of cells printed into topologically defined structures. Tissue Eng Pt A 2008, 14:413-421.
290. Smith C.M., Christian J.J., Warren W.L., Williams S.K. Characterizing environmental factors that impact the viability of tissue-engineered constructs fabricated by a direct-write bioassembly tool. Tissue Eng 2007, 13:373-383.
291. Mironov V., Prestwich G., Forgacs G. Bioprinting living structures. J Mater Chem 2007, 17:2054-2060.
292. Arai K., Iwanaga S., Toda H., Genci C., Nishiyama Y., Nakamura M. Three-dimensional inkjet biofabrication based on designed images. Biofabrication 2011, 3:034113.
293. Kim G., Son J., Park S., Kim W. Hybrid process for fabricating 3d hierarchical scaffolds combining rapid prototyping and electrospinning. Macromol Rapid Comm 2008, 29:1577-1581.
294. Sun W., Starly B., Nam J., Darling A. Bio-cad modeling and its applications in computer-aided tissue engineering. Comput Aided Des 2005, 37:1097-1114.
295. Lian Q., Li D.C., Tang Y.P., Zhang Y.R. Computer modeling approach for a novel internal architecture of artificial bone. Comput Aided Des 2006, 38:507-514.
296. Hollister S.J., Lin C.Y. Computational design of tissue engineering scaffolds. Comput Method Appl M 2007, 196:2991-2998.
297. Lacroix D., Planell J.A., Prendergast P.J. Computer-aided design and finite-element modelling of biomaterial scaffolds for bone tissue engineering. Philos T R Soc A 2009, 367:1993-2009.