In vivo bone response to 3D periodic hydroxyapatite scaffolds assembled by direct ink writing

Journal of Biomedical Materials Research - Part A

Volumn 83, Issue 3, 2007, Pages 747-758

  Simon, Joshua L ^a   Michna, Sarah ^b   Lewis, Jennifer A ^b   Rekow, E Dianne ^c   Thompson, Van P ^c   Smay, James E ^d   Yampolsky, Andrew ^c   Parsons, J Russell ^a   Ricci, John L ^c  

^a RUTGERS NEW JERSEY MEDICAL SCHOOL   (United States)

^b UNIVERSITY OF ILLINOIS AT URBANA CHAMPAIGN   (United States)

^c NEW YORK UNIVERSITY   (United States)

^d Oklahoma State University   (United States)

Author keywords

Bone scaffolds; Colloidal inks; Direct writing; Hydroxyapatite; Periodic

Indexed keywords

BONE; HISTOLOGY; INK; SCAFFOLDS; SCANNING ELECTRON MICROSCOPY; SINTERING; THREE DIMENSIONAL; TOMOGRAPHY;

AREAL DIMENSIONS; BONE SCAFFOLDS; COLLOIDAL INKS; DIRECT-WRITE ASSEMBLY; RADIAL GROWTH; REPLACEMENT STRUCTURES;

HYDROXYAPATITE;

HYDROXYAPATITE; INK;

ANIMAL EXPERIMENT; ANIMAL MODEL; ANIMAL TISSUE; ARTICLE; BIOCOMPATIBILITY; BONE; BONE DEFECT; BONE GROWTH; BONE MATURATION; BONE REMODELING; CONTROLLED STUDY; DENSITY; HISTOPATHOLOGY; IMPLANTATION; IN VIVO STUDY; MATERIAL COATING; MICRO-COMPUTED TOMOGRAPHY; NONHUMAN; OSSIFICATION; PARTICLE SIZE; POROSITY; RABBIT; SCANNING ELECTRON MICROSCOPY; TISSUE REACTION; TRABECULAR BONE; WRITING;

ANIMALS; BONE REGENERATION; BONE SUBSTITUTES; DURAPATITE; INK; MATERIALS TESTING; POROSITY; RABBITS; SKULL FRACTURES; TISSUE SCAFFOLDS;

EID: 36048935649     PISSN: 15493296     EISSN: 15524965     Source Type: Journal    
DOI: 10.1002/jbm.a.31329     Document Type: Article

References (43)

1. Chiroff RT, White EW, Weber KN, Roy DM. Tissue ingrowth of Replamineform implants. J Biomed Mater Res 1975;9:29-45.
2. de Groot K. Bioceramics consisting of calcium phosphate salts. Biomaterials 1980;1:47-50.
3. Chang BS, Lee CK, Hong KS, et al. Osteoconduction at porous hydroxyapatite with various pore configurations. Biomaterials 2000;21:1291-1298.
4. Gauthier O, Bouler JM, Aguado E, Pilet P, Daculsi G. Macroporous biphasic calcium phosphate ceramics: Influence of macropore diameter and macroporosity percentage on bone ingrowth. Biomaterials 1998;19:133-139.
5. Lemperle SM, Calhoun CJ, Curran RW, Holmes RE. Bony healing of large cranial and mandibular defects protected from soft-tissue interposition: A comparative study of spontaneous bone regeneration, osteoconduction, and cancellous autografting in dogs. Plast Reconstr Surg 1998;101:660-672.
6. Roy DM, Linnehan SK. Hydroxyapatite formed from coral skeletal carbonate by hydrothermal exchange. Nature 1974;247:220-222.
7. White R, White E, Web J. Replamineform: A new process for prepariing prous ceramic, metal, and polymer prosthetic materials. Science 1972;176:922-924.
8. Lin FH, Liao CJ, Chen KS, Sun JS, Lin CY. Preparation of betaTCP/HAP biphasic ceramics with natural bone structure by heating bovine cancellous bone with the addition of (NH(4))(2)HPO(4). J Biomed Mater Res 2000;51:157-163.
9. Tancred DC, McCormack BA, Carr AJ. A synthetic bone implant macroscopically identical to cancellous bone. Biomaterials 1998;19:2303-2311.
10. Rejda BV, Peelen JG, de Groot K. Tri-calcium phosphate as a bone substitute. J Bioeng 1977;1:93-97.
11. Sepulveda P, Binner JG, Rogero SO, Higa OZ, Bressiani JC. Production of porous hydroxyapatite by the gel-casting of foams and cytotoxic evaluation. J Biomed Mater Res 2000;50:27-34.
12. Tamai N, Myoui A, Tomita T, et al. Novel hydroxyapatite ceramics with an interconnective porous structure exhibit superior osteoconduction in vivo. J Biomed Mater Res 2002;59:110-117.
13. Woyansky J, Scott C, Minnear W. Processing of porous ceramics. MAm Ceram Soc Bull 1992;71:1674-1682.
14. Bouler JM, Trecant M, Delecrin J, Royer J, Passuti N, Daculsi G. Macroporous biphasic calcium phosphate ceramics: Influence of five synthesis parameters on compressive strength. J Biomed Mater Res 1996;32:603-609.
15. Tsuruga E, Takita H, Itoh H, Wakisaka Y, Kuboki Y. Pore size of porous hydroxyapatite as the cell-substratum controls BMP-induced osteogenesis. J Biochem (Tokyo) 1997;121:317-324.
16. Gomes de Sousa FC, Evans, JRG. Sintered hydroxyapatite latticework for bone substitute. J Am Ceram Soc 2003;86:517-519.
17. Cheah CM, Chua CK, Leong KF, Cheong CH, Naing MW. Automatic algorithm for generating complex polyhedral scaffold structures for tissue engineering. Tissue Eng 2004;10:595-610.
18. Chua CK, Leong KF, Tan KH, Wiria FE, Cheah CM. Development of tissue scaffolds using selective laser sintering of polyvinyl alcohol/hydroxyapatite biocomposite for cranio acial and joint defects. J Mater Sci Mater Med 2004;15:1113-1121.
19. Cooke MN, Fisher JP, Dean D, Rimnac C, Mikos AG. Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth. J Biomed Mater Res B 2003;64:65-69.
20. Hutmacher DW. Scaffold design and fabrication technologies for engineering tissues-State of the art and future perspectives. J Biomater Sci Polym Ed 2001;12:107-124.
21. Hutmacher DW, Sittinger M, Risbud MV. Scaffold-based tissue engineering: Rationale for computer-aided design and solid free-form fabrication systems. Trends Biotechnol 2004;22:354-362.
22. Sherwood JK, Riley SL, Palazzolo R, et al. A three-dimensional osteochondral composite scaffold for articular cartilage repair. Biomaterials 2002;23:4739-4751.
23. Tan KH, Chua CK, Leong KF, et al. Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends. Biomaterials 2003;24:3115-3123.
24. Yang S, Leong KF, Du Z, Chua CK. The design of scaffolds for use in tissue engineering. II. Rapid prototyping techniques. Tissue Eng 2002;8:1-11.
25. Yeong WY, Chua CK, Leong KF, Chandrasekaran M. Rapid prototyping in tissue engineering: Challenges and potential. Trends Biotechnol 2004;22:643-652.
26. Zein I, Hutmacher DW, Tan KC, Teoh SH. Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials 2002;23:1169-1185.
27. Zeltinger J, Sherwood JK, Graham DA, Mueller R, Griffith LG. Effect of pore size and void fraction on cellular adhesion, proliferation, and matrix deposition. Tissue Eng 2001;7:557-572.
28. Chu TM, Hollister SJ, Halloran JW, Feinberg SE, Orton DG. Manufacturing and characterization of 3D hydroxyapatite bone tissue engineering scaffolds. Ann N Y Acad Sci 2002;961:114-117.
29. Chu TM, Orton DG, Hollister SJ, Feinberg SE, Halloran IW. Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures. Biomaterials 2002;23:1283-1293.
30. Levy RA, Chu TM, Halloran IW, Feinberg SE, Hollister S. CT-generated porous hydroxyapatite orbital floor prosthesis as a prototype bioimplant. AJNR Am J Neuroradiol 1997;18:1522-1525.
31. Wilson CE, de Bruijn JD, van Blitterswijk CA, Verbout AJ, Dhert WJ. Design and fabrication of standardized hydroxyapatite scaffolds with a defined macro-architecture by rapid prototyping for bone-tissue-engineering research. J Biomed Mater Res A 2004;68:123-132.
32. Smay JE, Cesarano J, Lewis JA. Colloidal inks for directed assembly of 3D periodic structures. Langmuir 2002;18:5429-5437.
33. Michna S, Wu W, Lewis JA. Concentrated hydroxyapatite inks for direct-write assembly of 3D periodic scaffolds. Biomaterials 2005;26:5632-5639.
34. Dellinger JG, Eurell JAC, Jamison RD. Bone response to 3D periodic hydroxyapatite scaffolds with and without tailored microporosity to deliver bone morphogenetic protein 2 J. Biomed Mater Res A 2005;76:366-37.
35. Borah B, Gross GJ, Dufresne TE, et al. Three-dimensional microimaging (MRmI and mCT), finite element modeling, and rapid prototyping provide unique insights into bone architecture in osteoporosis. Anat Rec (New Ana) 2001;265:101-110.
36. Li Q, Lewis J. Nanoparticle inks for directed assembly of 3D periodic structures. Adv Mater 2003;15:1639-1643.
37. Therriault D, White S, Lewis JA. Chaotic mixing in 3D microvascular networks fabricated by direct-write assembly. Nature Mater 2003;2:265-271.
38. Gratson GM, Xu M, Lewis J. Direct writing of three dimensional webs. Nature 2004;428:386.
39. Lewis JA, Cima MJ. Diffusivities of dialkyl phthalataes in plasticized poly(vinyl butyral): Impact on binder thermolysis. J Am Ceram Soc 1990;73:2702-2797.
40. Damien, CJ, Parsons, JR, Benedict, JJ, Weisman, DS. Investigation of a hydroxyapatite and calcium sulfate composite supplemented with an osteoinductive factor. J Biomed Mater Res 1990;24:639-654.
41. Damien CJ, Ricci JL, Christel P, Alexander H, Patat JL. Formation of a calcium phosphate-rich layer on absorbable calcium carbonate bone graft substitutes. Calcif Tissue Int 1994; 55:151-158.
42. Simon JL, Dutta Roy T, Parsons JR, Rekow ED, Thompson VP, Kemnitzer J, Ricci JL. Engineered cellular response to scaffold architecture in a rabbit trephine defect. J Biomed Mater Res A 2003;66:275-282.
43. Li SH, De Wijn JR, Layrolle P, de Groot K. Synthesis of macroporous hydroxyapatite scaffolds for bone tissue engineering. J Biomed Mater Res 2002;61:109-120.